help, my le eco max 2 have some problem
1. cant boot to twrp
my detail phone on attachment
2. cant factory reset
i push "factory reset" but nothing happen
maybe anyone can help me. this problem make me so frustrating:silly:
if need more information please tell me. thanks
fastboot flash aboot "<full path to that file on your pc>/emmc_appsboot.mbn"
fastboot flash abootbak "<full path to that file on your pc>/emmc_appsboot.mbn"
try, file attached
Can you boot to recovery mode? becoz, for me adb does not recognized the phone if in other mode.
my suggestion
1.Boot to recovery(press UP-Vol +Power)
2.Use ADB to flash TWRP (official one)
3. Wipe the whole phone (It won't boot becoz no OS anymore)
4.Use ADB push to transfer flashable ROM file like
adb push XXX.zip /sdcard/
5. Disconnect cable from PC
6.Flash the fresh ROM.
I have done these many times for my first day with X829. Now I happy with co92 ROM (not high Score but Very stable for me)
A.N.Droid said:
fastboot flash aboot "<full path to that file on your pc>/emmc_appsboot.mbn"
fastboot flash abootbak "<full path to that file on your pc>/emmc_appsboot.mbn"
try, file attached
Click to expand...
Click to collapse
still same < waiting for device
[email protected] said:
Can you boot to recovery mode? becoz, for me adb does not recognized the phone if in other mode.
my suggestion
1.Boot to recovery(press UP-Vol +Power)
2.Use ADB to flash TWRP (official one)
3. Wipe the whole phone (It won't boot becoz no OS anymore)
4.Use ADB push to transfer flashable ROM file like
adb push XXX.zip /sdcard/
5. Disconnect cable from PC
6.Flash the fresh ROM.
I have done these many times for my first day with X829. Now I happy with co92 ROM (not high Score but Very stable for me)
Click to expand...
Click to collapse
cant boot to recovery. my left screen normal, right screen white noisy
attach pic on my first post on top
Lecoqspo said:
cant boot to recovery. my left screen normal, right screen white noisy
attach pic on my first post on top
Click to expand...
Click to collapse
Which TWRP version did you flash?
I bet it's the corrupted 3.1.1-1
Gesendet von meinem HTC Desire 310 mit Tapatalk
---------- Post added at 05:22 PM ---------- Previous post was at 05:17 PM ----------
I can offer remote Support if you want.
Gesendet von meinem HTC Desire 310 mit Tapatalk
A.N.Droid said:
I bet it's the corrupted 3.1.1-1
Gesendet von meinem HTC Desire 310 mit Tapatalk
---------- Post added at 05:22 PM ---------- Previous post was at 05:17 PM ----------
I can offer remote Support if you want.
Gesendet von meinem HTC Desire 310 mit Tapatalk
Click to expand...
Click to collapse
Please if it can help. Thanks..
Lecoqspo said:
Please if it can help. Thanks..
Click to expand...
Click to collapse
you have pm
edit: i´m unable to send pm. last 4 messages i tried to send don´t show up in my outbox.
please install teamviewer, send me your id and password in pm.
we will talk then...
Lecoqspo said:
help, my le eco max 2 have some problem
1. cant boot to twrp
my detail phone on attachment
2. cant factory reset
i push "factory reset" but nothing happen
maybe anyone can help me. this problem make me so frustrating:silly:
if need more information please tell me. thanks
Click to expand...
Click to collapse
if you have root access then you can flash twrp recovery by using official twrp app.
just download the app chose the latest version of twrp, download it and flash it by using the same app.
Lecoqspo said:
help, my le eco max 2 have some problem
1. cant boot to twrp
my detail phone on attachment
2. cant factory reset
i push "factory reset" but nothing happen
maybe anyone can help me. this problem make me so frustrating:silly:
if need more information please tell me. thanks
Click to expand...
Click to collapse
I had the same problem with twrp 3.1.1-1. other people had the same problem.
Hold the volleme button - and the power button
Put the smartphone in bootloader mode and install the version of twrp 3.1.1-0
A.N.Droid said:
you have pm
edit: i´m unable to send pm. last 4 messages i tried to send don´t show up in my outbox.
please install teamviewer, send me your id and password in pm.
we will talk then...
Click to expand...
Click to collapse
SOLVED
Many thanks to Jan (A.N.Droid)
Have a good day :victory:
I have le ls1
I cant boot to twrp
I cant factory reset my phone
And when i attach usb then its only shows charging.i change it but it automatically goes to charging. Plzz help
Heyyo @Amolg_130 , have you tried checking Le 1s support groups? They might know more on how to fix it, as it could be a bad version of TWRP or something else.
Related
Hello Guys,
I have a Korean phone named as Pantech sky vega racer 2 (im-830l)..
few days ago, i was browsing the internet from the phone and charger was connected. suddenly the phone showed full blue screen and restarted and stucked at logo. i tries my best to unbrick it but no luck.
1- phone is not going to recovery mode..
2-fastboot is working but it is not booting into recovery.
3- i flashed full online upgrade but no change.
4- i tried to flash images manually by fastboot mode. boot,recovery images flashed successfully but system image not flashed (reason: too large data)
5- fastboot can unlock bootloader..and flash images only but not booting recovery.
Here Are the phone specifications:
OS Android OS, v4.0 (Ice Cream Sandwich)
Chipset Qualcomm MSM8960 Snapdragon
CPU Dual-core 1.5 GHz
GPU Adreno 225
any one to help?
No Response??????
Hello??????????? Any 1 ???
I just unbrick my a830l
UMAIR_ARSHAD said:
Hello Guys,
I have a Korean phone named as Pantech sky vega racer 2 (im-830l)..
few days ago, i was browsing the internet from the phone and charger was connected. suddenly the phone showed full blue screen and restarted and stucked at logo. i tries my best to unbrick it but no luck.
1- phone is not going to recovery mode..
2-fastboot is working but it is not booting into recovery.
3- i flashed full online upgrade but no change.
4- i tried to flash images manually by fastboot mode. boot,recovery images flashed successfully but system image not flashed (reason: too large data)
5- fastboot can unlock bootloader..and flash images only but not booting recovery.
Here Are the phone specifications:
OS Android OS, v4.0 (Ice Cream Sandwich)
Chipset Qualcomm MSM8960 Snapdragon
CPU Dual-core 1.5 GHz
GPU Adreno 225
Click to expand...
Click to collapse
Hi! I have the same problem with yours. I just fix it! I immediately come to post my experience here!
I've try lots of recovery image file to flash to my phone, all failed. Then I try to boot from recovery image directly instead of flashing it to my phone. Finally, I find a A830L recovery image and boot it in fastboot mode. After boot into recovery, you can reflash your system!!
1st file: CWM_4.1.2_A830_Fastboot.rar
Download this zip file and unzip it. Run command line window in the unzip folder. Then, type "fastboot boot recovery6032.img" to boot from recovery6032.img.
Finally, you can flash any ROM you like.
2nd file: IM-A830L_S1232134_to_S1232211a.zip
This is the newest Android 4.1.2 original ROM, version S1232211, for your reference.
Links are attached in attachment. Hope my experience helps you!
But fastboot is not booting into recovery.
Sent from my Noir A10 using XDA Premium 4 mobile app
SAME PROBLEM TO MEEEEEEEE
ANY ONE HELP ME
strucked on SKY VEGA LOGO
hi
will66 said:
Hi! I have the same problem with yours. I just fix it! I immediately come to post my experience here!
I've try lots of recovery image file to flash to my phone, all failed. Then I try to boot from recovery image directly instead of flashing it to my phone. Finally, I find a A830L recovery image and boot it in fastboot mode. After boot into recovery, you can reflash your system!!
1st file: CWM_4.1.2_A830_Fastboot.rar
Download this zip file and unzip it. Run command line window in the unzip folder. Then, type "fastboot boot recovery6032.img" to boot from recovery6032.img.
Finally, you can flash any ROM you like.
2nd file: IM-A830L_S1232134_to_S1232211a.zip
This is the newest Android 4.1.2 original ROM, version S1232211, for your reference.
Links are attached in attachment. Hope my experience helps you!
Click to expand...
Click to collapse
you are my hero man lol wow thnks.. i restore my dead set through this ..keep it up
links not working
will66 said:
Hi! I have the same problem with yours. I just fix it! I immediately come to post my experience here!
I've try lots of recovery image file to flash to my phone, all failed. Then I try to boot from recovery image directly instead of flashing it to my phone. Finally, I find a A830L recovery image and boot it in fastboot mode. After boot into recovery, you can reflash your system!!
1st file: CWM_4.1.2_A830_Fastboot.rar
Download this zip file and unzip it. Run command line window in the unzip folder. Then, type "fastboot boot recovery6032.img" to boot from recovery6032.img.
Finally, you can flash any ROM you like.
2nd file: IM-A830L_S1232134_to_S1232211a.zip
This is the newest Android 4.1.2 original ROM, version S1232211, for your reference.
Links are attached in attachment. Hope my experience helps you!
Click to expand...
Click to collapse
I have the same problem & your solution seems to well, but unfortunately links are expired, pls help if possible as quickly as possible
azhar63 said:
I have the same problem & your solution seems to well, but unfortunately links are expired, pls help if possible as quickly as possible
Click to expand...
Click to collapse
You can use IM-A830L_S1232134_to_S1232214.zip instead
Link has sent you by message.
thanks
will66 said:
You can use IM-A830L_S1232134_to_S1232214.zip instead
Link has sent you by message.
Click to expand...
Click to collapse
oh that's very nice & thankkkkkkks a lot my dear mate.
---------- Post added at 05:57 AM ---------- Previous post was at 05:49 AM ----------
azhar63 said:
oh that's very nice & thankkkkkkks a lot my dear mate.
Click to expand...
Click to collapse
thanks to reply but first link still not working and I'm downloading second file from new link. But I need first link too, to proceed. Please upload to other easy place for me if possible.
thanks
---------- Post added at 06:09 AM ---------- Previous post was at 05:57 AM ----------
when I click link it shows:
Lol, you visit the page does not exist.
Possible causes:
1 in the address bar enter the wrong address.
2 You clicked on a link has expired.
---------- Post added at 06:46 AM ---------- Previous post was at 06:09 AM ----------
I tried my best to find this file manually CWM_4.1.2_A830_Fastboot.rar but its just in chinese site and it need registration with chinese number or mailbox. so help me any body to get this file
araheels said:
SAME PROBLEM TO MEEEEEEEE
ANY ONE HELP ME
strucked on SKY VEGA LOGO
Click to expand...
Click to collapse
try to reflash again the rom or revert back to stock rom..
cheeze.keyk said:
try to reflash again the rom or revert back to stock rom..
Click to expand...
Click to collapse
thanks to reply
I did many time to stock rom every thing works fine even device restarts but after that it comes on logo it i try to go recovery it just shows this
pdl download
fastboot
reboot
power off
nothing recovery???
azhar63 said:
thanks to reply
I did many time to stock rom every thing works fine even device restarts but after that it comes on logo it i try to go recovery it just shows this
pdl download
fastboot
reboot
power off
nothing recovery???
Click to expand...
Click to collapse
it should have a recovery menu there..hmm
cheeze.keyk said:
it should have a recovery menu there..hmm
Click to expand...
Click to collapse
Anybody help me pls I'm waiting hopefully I just need this file now to alive it "CWM_4.1.2_A830_Fastboot.rar"
You can check the thread of 830K/L at vegaviet forums.
cheeze.keyk said:
You can check the thread of 830K/L at vegaviet forums.
Click to expand...
Click to collapse
I checked but not succeeded yet
Please help me
will66 said:
Hi! I have the same problem with yours. I just fix it! I immediately come to post my experience here!
I've try lots of recovery image file to flash to my phone, all failed. Then I try to boot from recovery image directly instead of flashing it to my phone. Finally, I find a A830L recovery image and boot it in fastboot mode. After boot into recovery, you can reflash your system!!
1st file: CWM_4.1.2_A830_Fastboot.rar
Download this zip file and unzip it. Run command line window in the unzip folder. Then, type "fastboot boot recovery6032.img" to boot from recovery6032.img.
Finally, you can flash any ROM you like.
2nd file: IM-A830L_S1232134_to_S1232211a.zip
This is the newest Android 4.1.2 original ROM, version S1232211, for your reference.
Links are attached in attachment. Hope my experience helps you!
Click to expand...
Click to collapse
Can you please upload this file for me to solve my problem? I searched too much but couldn't get this file "CWM_4.1.2_A830_Fastboot.rar"
I need this file "CWM_4.1.2_A830_Fastboot.rar"
I'm searching this file "CWM_4.1.2_A830_Fastboot.rar" for many weeks but not succeeded Can any body help me to provide this Please ?
azhar63 said:
I have the same problem & your solution seems to well, but unfortunately links are expired, pls help if possible as quickly as possible
Click to expand...
Click to collapse
Hi, I got a solution for your problem. All the links are available for updates stock roms of IM-830 L/S/K at http://mizal.net:82/pantech/RACER2/Update.zip/
More custom roms are also availible http://mizal.net:82/pantech/RACER2/ . Kitkat roms for 830 also available at http://mizal.net:82/pantech/RACER2/Tekcafe Team/
---------- Post added at 07:45 AM ---------- Previous post was at 07:41 AM ----------
azhar63 said:
thanks to reply
I did many time to stock rom every thing works fine even device restarts but after that it comes on logo it i try to go recovery it just shows this
pdl download
fastboot
reboot
power off
nothing recovery???
Click to expand...
Click to collapse
I believe trying a wipe would help and reflashing recovery then. Type this if it help fastboot erase system -w
Cennian said:
Hi, I got a solution for your problem. All the links are available for updates stock roms of IM-830 L/S/K at http://mizal.net:82/pantech/RACER2/Update.zip/
More custom roms are also availible http://mizal.net:82/pantech/RACER2/ . Kitkat roms for 830 also available at http://mizal.net:82/pantech/RACER2/Tekcafe Team/
---------- Post added at 07:45 AM ---------- Previous post was at 07:41 AM ----------
I believe trying a wipe would help and reflashing recovery then. Type this if it help fastboot erase system -w
Click to expand...
Click to collapse
thanks a lot but it didn't solve my problem when I type command the result OK but not succeeded
i was trying to flash a rom and in hurry i wiped sd card..now there is no rom installed..i cant even go to recovery because my phone volume keys are broken can anyone help me to flash rom to my phone using adb also do i have to flash recovey.img again ?... i am a newbie so plz tell me how to use adb also thanks in advance
Why not try fastboot?
来自我的 MI 2 上的 Tapatalk
---------- Post added at 05:31 PM ---------- Previous post was at 05:25 PM ----------
cnboot said:
Why not try fastboot?
来自我的 MI 2 上的 Tapatalk
Click to expand...
Click to collapse
And i wanna know how you wipe your sdcard?You say that you can't go to recovery,are you wipe by fastboot?You also can run "adb reboot recovery" so that you can go to the recovery.
来自我的 MI 2 上的 Tapatalk
---------- Post added at 05:36 PM ---------- Previous post was at 05:31 PM ----------
I am sorry for i make a mistake in grammar.
来自我的 MI 2 上的 Tapatalk
Which is your phone model
If your phone is recognized by the computer. Then I will port u tomorrow a simple tool.
If you can go to fastboot then see my column in XDA under. ''puduraja '' you can directly flash your recovery.
Sent from my Spice Mi-535 using xda app-developers app
wiped sd through twrp..
my phone is micromax a57
i am a newbie
my phone is micromax a57.. i wiped sd card through twrp recovery.. i am a newbie so plz tell me how to use adb and fastboot..to get myself out of this problem
will you plz tell me how.. does it will recognise my phone as it hav no rom install
cnboot said:
Why not try fastboot?
来自我的 MI 2 上的 Tapatalk
---------- Post added at 05:31 PM ---------- Previous post was at 05:25 PM ----------
And i wanna know how you wipe your sdcard?You say that you can't go to recovery,are you wipe by fastboot?You also can run "adb reboot recovery" so that you can go to the recovery.
来自我的 MI 2 上的 Tapatalk
---------- Post added at 05:36 PM--------- Previous post was at 05:31 PM -----
how??
Click to expand...
Click to collapse
plz help me to get back my micromax a57 working
how to use adb and fastboot ?? and what to do if my phone is not recognised ?
anyone there who can help me ?
provide me link to how to use fastboot and adb
direct recovery/bootloader or download mode
vivek tiwari said:
provide me link to how to use fastboot and adb
Click to expand...
Click to collapse
As promised I Am poorting the software tool for easying your cause.
If you know how to get into fast food use can flash the recovery directly - You informed you do not know.
Then you use the other folder open the zip file and take the adb_Tool to your desktop. and click the recovdery.bat In a couple of seconds your phone will enter the recovery phase.
Note your phone should be recognized by your computer. You should have already ticled USB debugging.
thanks sir for the tools..
sir my pc is not recognising my device... please tell me what to do ? my usb debugging was on before i wiped my os
thanks for the tool sir but my phone is not getting recognised
puduraja said:
As promised I Am poorting the software tool for easying your cause.
If you know how to get into fast food use can flash the recovery directly - You informed you do not know.
Then you use the other folder open the zip file and take the adb_Tool to your desktop. and click the recovdery.bat In a couple of seconds your phone will enter the recovery phase.
Note your phone should be recognized by your computer. You should have already ticled USB debugging.
Click to expand...
Click to collapse
re;
thank for your help sir but my phone is not getting recognised by pc...i am prietty sure that usb debugging was on in my phone before i wiped the od help me
wiped through twrp
cnboot said:
Why not try fastboot?
来自我的 MI 2 上的 Tapatalk
---------- Post added at 05:31 PM ---------- Previous post was at 05:25 PM ----------
And i wanna know how you wipe your sdcard?You say that you can't go to recovery,are you wipe by fastboot?You also can run "adb reboot recovery" so that you can go to the recovery.
来自我的 MI 2 上的 Tapatalk
---------- Post added at 05:36 PM ---------- Previous post was at 05:31 PM ----------
I am sorry for i make a mistake in grammar.
来自我的 MI 2 上的 Tapatalk
Click to expand...
Click to collapse
hi friend
i was trying to install new rom i wiped all dalvik cache,system and accidently sd card also...then tried to reboot and the phone i hung up on micromax ninja logo only...can you plzz help me
Without volume keys, you can 't enter either fastboot or recovery mode. Reparing volume hardware keys may be the only option. Then you can enter twrp recovery and flash custom rom again.
Sent from my G610-U00 using xda app-developers app
Sithu Htun said:
Without volume keys, you can 't enter either fastboot or recovery mode. Reparing volume hardware keys may be the only option. Then you can enter twrp recovery and flash custom rom again.
Sent from my G610-U00 using xda app-developers app
Click to expand...
Click to collapse
thanks friend but if the twrp recovery will open after i repair keys and hold them...because my full os is gone so if twrp be still there or i have to flash it??
vivek tiwari said:
thanks friend but if the twrp recovery will open after i repair keys and hold them...because my full os is gone so if twrp be still there or i have to flash it??
Click to expand...
Click to collapse
You said the last wipe made SD card and all the partitions (System, Data, Cache, Dalvik Chahe) gone.
So TWRP must be still there.
Repairing the volume keys and flashing the specific ROM again will bring the phone back, I guess. :fingers-crossed:
vivek tiwari said:
hi friend
i was trying to install new rom i wiped all dalvik cache,system and accidently sd card also...then tried to reboot and the phone i hung up on micromax ninja logo only...can you plzz help me
Click to expand...
Click to collapse
You can try fastboot mode to install the rom.
来自我的 MI 2 上的 Tapatalk
cnboot said:
You can try fastboot mode to install the rom.
来自我的 MI 2 上的 Tapatalk
Click to expand...
Click to collapse
yes you are right friend...but my phone is not getting recognised by pc...or am i making some wrong command..dnt know the exact reason... can you plz explain how to use fastboot to do so...
vivek tiwari said:
yes you are right friend...but my phone is not getting recognised by pc...or am i making some wrong command..dnt know the exact reason... can you plz explain how to use fastboot to do so...
Click to expand...
Click to collapse
Well,to use the fastboot,you should make sure that your phone is on the fastboot mode,if your volume keys is borken,you couldn't enter the fastboot.When you enter the fastboot,you can run fastboot devices,when you see XXXXXXX fasrboot
,you have enter the fastboot,then you can run fastboot flash xxx.img to flash.You must have the appropriate img file,you can download it on official website.
vivek tiwari said:
re;
thank for your help sir but my phone is not getting recognised by pc...i am prietty sure that usb debugging was on in my phone before i wiped the od help me
Click to expand...
Click to collapse
Due you have Smart phone Firmware Tool. If you know how to handle it You install new rom. The toll is available in the XDA, here kindly google it, learn and try to do. I was also once like you now I learned the tricks.
If you have the tool and if you have the firmware or if you know how to install then I can give you a titorial.
If you are in a hurry. Go to some service centre or if your phone is with in the waranty period get the volume button repaired. This may solve many of your problem
best wishes
thanks mr.paduraja the tool you just suggested seems to be best option for me...but in its tutorial at step no. 10 it is mentioned that i should press vol buttons so that pc will recognise my phone...but unfortunetly thats not possible... can i use power button instead of vol buttons ??
vivek tiwari said:
thanks mr.paduraja the tool you just suggested seems to be best option for me...but in its tutorial at step no. 10 it is mentioned that i should press vol buttons so that pc will recognise my phone...but unfortunetly thats not possible... can i use power button instead of vol buttons ??
Click to expand...
Click to collapse
Not necessary. you open control panel and open the Device manager. Just ofter loading the Scatter file remove your battary. unplug the cable re-plug the cable. you keenly observe the sound from your computer/ laptop.
Just try twice or thrice it will learn the trick and load the firmware.
Try
with best wishes.
Hey guys ,
So can anyone help me ?
My phone died today with all the data whipped.
Is there an officiale or costume one plus X Rom ?
Fastboot works for now
Iglorious_Nuke said:
Hey guys ,
So can anyone help me ?
My phone died today with all the data whipped.
Is there an officiale or costume one plus X Rom ?
Fastboot works for now
Click to expand...
Click to collapse
Can you tell me whats working like can you go into the recovery n all tha
PS: if you want stock rom here is the link+its stock rom not ota so dont get confused
http://forum.xda-developers.com/oneplus-x/general/ota003all20151024193-oxygenos-ota-dump-t3244996
mohammedtabish said:
Can you tell me whats working like can you go into the recovery n all tha
PS: if you want stock rom here is the link+its stock rom not ota so dont get confused
http://forum.xda-developers.com/oneplus-x/general/ota003all20151024193-oxygenos-ota-dump-t3244996
Click to expand...
Click to collapse
the only thing that works for me is fastboot devices it gives something back.
The screen is complety black
it gives some feedback when loading trough vibration
Iglorious_Nuke said:
the only thing that works for me is fastboot devices it gives something back.
The screen is complety black
it gives some feedback when loading trough vibration
Click to expand...
Click to collapse
Have you tried going in recovery or bootloader
Try these commands after connecting you opx
"adb reboot-bootloader"
"adb reboot recovery"
Remove quotes
---------- Post added at 08:28 PM ---------- Previous post was at 08:04 PM ----------
N try to hold down power botton for nine seconds then hold down power for 3 sec then connect then use these commands
mohammedtabish said:
Have you tried going in recovery or bootloader
Try these commands after connecting you opx
"adb reboot-bootloader"
"adb reboot recovery"
Remove quotes
---------- Post added at 08:28 PM ---------- Previous post was at 08:04 PM ----------
N try to hold down power botton for nine seconds then hold down power for 3 sec then connect then use these commands
Click to expand...
Click to collapse
Iglorious_Nuke said:
Hey guys ,
So can anyone help me ?
My phone died today with all the data whipped.
Is there an officiale or costume one plus X Rom ?
Fastboot works for now
Click to expand...
Click to collapse
Did you try to root or install TWRP ? You just got the OP X i saw you on OP X forum:fingers-crossed:
ludoke said:
Did you try to root or install TWRP ? You just got the OP X i saw you on OP X forum:fingers-crossed:
Click to expand...
Click to collapse
I just got the opx i signed up on xda previously i was using samsung galaxy s duos but never signed up. I just readed stuff for s duos never posted anything
---------- Post added at 10:32 PM ---------- Previous post was at 09:56 PM ----------
Iglorious_Nuke said:
Hey guys ,
So can anyone help me ?
My phone died today with all the data whipped.
Is there an officiale or costume one plus X Rom ?
Fastboot works for now
Click to expand...
Click to collapse
You have wiped recovery i.e you have unlocked bootloader.now follow these steps
1. Download minimal adb amd fast boot if you already have it ignore.
2. Stock recovery.. link:- https://drive.google.com/file/d/0B3AIip-hiOnNaTVSQXk5bUgzVnM/view?usp=sharing
3. Twrp recovery... link:- https://www.dropbox.com/s/zypo7b41lvj0r2h/en-recovery-twrp-onyx-.img?dl=0
4. Stock rom :- search it on xda or i have provided a link above
Now
1.Rename twrp recovery as recovery.img then copy it to the fastboot folder now flash it through commamd "Fastboot flash recovery recovery.img"
2. Now boot into recovery comnd "adb reboot recovery"
3. Mount you storage in twrp mount option.
4. Copy the rom and stock recovery...unmount.
5.. Boot into TWRP. Install -> Select Images -> Select the recovery.img -> Proceed. Scrn shts added
6.Now Do not reboot from TWRP, your oneplus would freeze instantly. Do a "adb reboot recovery" from terminal/command-prompt instead. This will reboot to stock recovery.
7. After having boot into Stock recovery, Flash full system Dum
mohammedtabish said:
I just got the opx i signed up on xda previously i was using samsung galaxy s duos but never signed up. I just readed stuff for s duos never posted anything
---------- Post added at 10:32 PM ---------- Previous post was at 09:56 PM ----------
You have wiped recovery i.e you have unlocked bootloader.now follow these steps
...
Click to expand...
Click to collapse
this doesn't work flash has no diveces
Iglorious_Nuke said:
this doesn't work flash has no diveces
Click to expand...
Click to collapse
You sure you have installed usb drivers of opx n did you turned on the usb debugging before it went like this?
mohammedtabish said:
You sure you have installed usb drivers of opx n did you turned on the usb debugging before it went like this?
Click to expand...
Click to collapse
drivers are installed .
Usb debugging was on befor all this.
The fastreboot diveces gave feedback till 1 hour ago
Iglorious_Nuke said:
drivers are installed .
Usb debugging was on befor all this.
The fastreboot diveces gave feedback till 1 hour ago
Click to expand...
Click to collapse
Try to hold the power buttom for 3secs the connect it n then chk fastboot.... If it worked rply asap
mohammedtabish said:
Try to hold the power buttom for 3secs the connect it n then chk fastboot.... If it worked rply asap
Click to expand...
Click to collapse
still nothing :/
Iglorious_Nuke said:
still nothing :/
Click to expand...
Click to collapse
Did you charges it beacuse i think its discharged try to charge and then tell me
mohammedtabish said:
Did you charges it beacuse i think its discharged try to charge and then tell me
Click to expand...
Click to collapse
the phone is on cuz my pc says inkown divice
Iglorious_Nuke said:
the phone is on cuz my pc says inkown divice
Click to expand...
Click to collapse
Then install drivers again
I wanted the new update so that I could move my apps to my SD card. I also wanted TWRP.
I followed this guide to install TWRP.
TWRP was successfully flashed. So I try to boot into it using 'fastboot boot recovery.img' to boot into it.
I get the 'ERROR: Remote DTB not found' message. So booting into recovery using fastboot doesn't work.
I try booting into recovery manually (volume down + power). That doesn't work either. It freezes up at the OnePlus logo.
So, since TWRP isn't working, I flash stock recovery. That worked fine, and booted into it successfully (manually).
I boot into stock recovery and followed this guide to try updating manually using stock recovery. Of course, the update fails.
I then try flashing the full dump here. I factory reset, then flashed the full dump.
"Update successful."
Now, it refuses to boot into system AND recovery.
Okay, I'll just reflash stock recovery?
ERROR: Remote DTB not found
Booting into recovery manually freezes up too, just like TWRP did earlier.
Is there something I'm doing wrong to get this error? Google tells me dtb errors are caused by corrupt IMGs, but I downloaded all the IMGs twice and from all available mirrors to try them out. I see that some other users in the OnePlus forums and in XDA are having the same problems when flashing TWRP.
I really just need to be able to boot into at least one recovery so I can flash a system dump again.
I am not sure if this is the cause of the problem, but I've noticed most OnePlus X users have the E1003 model, while I am using a E1005.
Any help is appreciated.
mechanity said:
I wanted the new update so that I could move my apps to my SD card. I also wanted TWRP.
I followed this guide to install TWRP. Like a few others in the thread, I had the problem that when I try to boot manually into recovery, the screen shows the OnePlus logo with the android logo. Then the android logo disappears, and no matter how long I hold the down button while booting, the screen freezes at the OnePlus logo.
Fine, I'll just use fastboot boot recovery.img .
Nope, I get the 'ERROR: Remote DTB not found' message. Still stuck on the fastboot screen.
Great, I'll just flash stock recovery. Cool, it worked.
I booted into stock recovery and followed this guide to try updating manually using stock recovery. Of course the update fails.
Maybe I can just flash the full dump here. I factory reset, then flashed the full dump. Now it refuses to boot into system AND recovery.
Okay, I'll just reflash stock recovery?
ERROR: Remote DTB not found
Booting into recovery manually gives me the same results as flashing TWRP did earlier. So now, I can neither flash stock recovery nor TWRP to install any OxygenOS.
Is there something I'm doing wrong to get this error? Google tells me dtb errors are caused by corrupt IMGs, but I downloaded all the IMGs twice and from all available mirrors to try them out. I really just need to be able to boot into at least one recovery so I can flash a system dump again.
I am not sure if this is the cause of the problem, but I've noticed most OnePlus X users have the E1003 model, while I am using a E1005.
Any help is appreciated.
Click to expand...
Click to collapse
When you try do go in recovery manually(volume up+power) what does it show
mohammedtabish said:
When you try do go in recovery manually(volume up+power) what does it show
Click to expand...
Click to collapse
Well, pressing volume up + power actually takes me to bootloader mode.
Volume down + power, on the other hand, shows the OnePlus logo and the Android logo for a split second. Then the android logo disappears, the OnePlus logo stays, and it freezes there.
In case my post wasn't very clear, the same thing happens even if I don't attempt to boot into recovery (as in, it does the same thing if I just press the power button to boot into the system).
In bootloader try to go in fastboot mode then flash the recovery using fastboot
Sent from my ONE E1003 using Tapatalk
mohammedtabish said:
In bootloader try to go in fastboot mode then flash the recovery using fastboot
Sent from my ONE E1003 using Tapatalk
Click to expand...
Click to collapse
That is exactly what I said I did in the OP. I have tried this multiple times.
Yes its softbrick and to solve this prob the only thing that i can think is install usb drivers again and tell me you that you have checked the debugging before getting softbricked and try f2fs recovery from eng_stk kernel thread
Sent from my ONE E1003 using Tapatalk
mohammedtabish said:
Yes its softbrick and to solve this prob the only thing that i can think is install usb drivers again and tell me you that you have checked the debugging before getting softbricked and try f2fs recovery from eng_stk kernel thread
Sent from my ONE E1003 using Tapatalk
Click to expand...
Click to collapse
I tried the f2fs recovery from blu_spark eng.stk thread just now. I am still getting the remote: dtb not found error.
Still freezing when I boot manually into the recovery.
I think change the pc you are using and start every thing from new in other thats the last hope
Sent from my ONE E1003 using Tapatalk
mohammedtabish said:
I think change the pc you are using and start every thing from new in other thats the last hope
Sent from my ONE E1003 using Tapatalk
Click to expand...
Click to collapse
Tried all of these steps on two other PCs already, on both Windows 8 and Windows 7. It's not a driver issue or OS issue.
Guess I'll have to wait until the system IMGs are out, unless anyone else has any other suggestions.
System image ??? If you mean stock then its available bro
Sent from my ONE E1003 using Tapatalk
mohammedtabish said:
System image ??? If you mean stock then its available bro
Sent from my ONE E1003 using Tapatalk
Click to expand...
Click to collapse
It's available as a .zip, which means you need a working recovery to install it.
There is image also if you cant find it i can upload that i have backed up that or i will try to find that link
Sent from my ONE E1003 using Tapatalk
mohammedtabish said:
There is image also if you cant find it i can upload that i have backed up that or i will try to find that link
Sent from my ONE E1003 using Tapatalk
Click to expand...
Click to collapse
Please do find that link or upload it, I cannot find it at all.
Thank you very much.
[/COLOR]
mechanity said:
Please do find that link or upload it, I cannot find it at all.
Thank you very much.
Click to expand...
Click to collapse
There you go bro
https://drive.google.com/file/d/0B3AIip-hiOnNaTVSQXk5bUgzVnM/view?usp=sharing
Sent from my ONE E1003 using Tapatalk
Hit thanks if helped
mohammedtabish said:
[/COLOR]
There you go bro
https://drive.google.com/file/d/0B3AIip-hiOnNaTVSQXk5bUgzVnM/view?usp=sharing
Sent from my ONE E1003 using Tapatalk
Hit thanks if helped
Click to expand...
Click to collapse
Sorry, I think you misunderstood me. I stated in the original post that I already have the stock recovery img, and have already tried flashing it.
I am talking about a full system image that can be flashed via fastboot or odin.
Ooooooo i think thats not available sorry for waisting you time though
Sent from my ONE E1003 using Tapatalk
mohammedtabish said:
Ooooooo i think thats not available sorry for waisting you time though
Sent from my ONE E1003 using Tapatalk
Click to expand...
Click to collapse
It's okay, thanks for your help.
mechanity said:
Tried all of these steps on two other PCs already, on both Windows 8 and Windows 7. It's not a driver issue or OS issue.
Guess I'll have to wait until the system IMGs are out, unless anyone else has any other suggestions.
Click to expand...
Click to collapse
been having the exact issue...now people wont think im crazy.
---------- Post added at 05:27 PM ---------- Previous post was at 05:26 PM ----------
mechanity said:
Sorry, I think you misunderstood me. I stated in the original post that I already have the stock recovery img, and have already tried flashing it.
I am talking about a full system image that can be flashed via fastboot or odin.
Click to expand...
Click to collapse
You can boot to stock.img?
I have the same dtb error when I try any twrp image I have attempted to flash...exactly like your issue, but stock works fine.
If you can get into stock you can flash the full rom zip of 2.1.2 and then flash the ota to 2.1.3 after.
You have to flash the full zip first.
joho5 said:
been having the exact issue...now people wont think im crazy.
---------- Post added at 05:27 PM ---------- Previous post was at 05:26 PM ----------
You can boot to stock.img?
I have the same dtb error when I try any twrp image I have attempted to flash...exactly like your issue, but stock works fine.
If you can get into stock you can flash the full rom zip of 2.1.2 and then flash the ota to 2.1.3 after.
You have to flash the full zip first.
Click to expand...
Click to collapse
Originally, I could boot to the stock recovery. However after flashing that full 2.1.3 dump that I linked to, I can't boot to system or recovery. Flashing stock recovery now gives me the same remote:dtb not found error.
i have the same problem
i can't get into adb but can get into fastboot
I wanted to make sure everyone read this part first so that you know it's critical to backup because it happened to me figuring things out. If for any reason you are stuck in a boot loop, just reload twrp recovery and restore boot.img that you backed up for an easy quick fix.
Install drivers and adb on your PC.
Open command prompt or search 'cmd'.
Navigate to the directory with adb.exe
Download and store TWRP 2.2.2 (preferred) in the same directory where adb is located. Recommend renaming recovery file to recovery.img
Enable usb debugging on device by going to settings > about > and click on MIUI version repeatedly until developer settings are enabled. Go back and select additional settings to enable usb debugging.
Run the command: adb devices - to verify if able to connect to device (the serial number of your device will populate if so.
Run the command: adb reboot bootloader and phone device should say "Fastboot" in blue font
Run the command: fastboot boot recovery.img
Recovery will show in Chinese, click on the bottom right button to select English
May require to enter your default password you use to unlock your phone normally.
Click backup and be sure to backup system, boot, and recovery most of all so it's easy to recover your device moving forward.
Download and save SuperSU (I have been unsuccessful in getting Magisk to work at this time) onto storage device from PC to MI 8 that should appear with your Internal storage
Click on "Mount" in TWRP and unselect read-only
Click "Install" and flash SuperSU then reboot (my device rebooted one time and fully boot up the 2nd time so you're not alarmed)
Links:
SuperSU: https://download.chainfire.eu/1122/SuperSU/SR3-SuperSU-v2.82-SR3-20170813133244.zip?retrieve_file=1
TWRP: https://forum.xda-developers.com/mi-8/development/recovery-twrp-3-2-2-0703-t38126005
Appreciate any feedback, ideas, thoughts, or suggestions where all can collaborate and expand where we help each other further. Look forward to the future development of the MI 8 folks! Please note, I wanted to share the method that seemed to work best for me, but please be aware each and every single MI 8 device is not always exactly the same and the end result may vary and I'm not held accountable or responsible should you choose to follow the directions listed above. However, I wanted to share this information to help avoid any frustration going forward and save you time.
p.s. - If someone could help me figure out how to get twrp recovery to hold and not end up being replaced by mi recovery I would be most grateful as this has been an issue for me (I tried flashing, booting, and installing the img through twrp with no success). Thank you.
Hello thanks for your guide but i think we first need to unlock bl And for the twrp recovery to stick and not to be replaced by xiaomi recovery we need to flash something called "dm-verity " it basically removes that check, which replaces any other recovery by xiaomi recovery
Have a nice day and thanks for your work
I thought so as well, unfortunately I just haven't had much luck with dm verity which led to a soft brick on my device. I'll have to look over the code as it may vary in comparison to other xiaomi devices.
Sent from my MI 8 using Tapatalk
Fastboot flash recovery Command should do it ..
mekaziah said:
I wanted to make sure everyone read this part first so that you know it's critical to backup because it happened to me figuring things out. If for any reason you are stuck in a boot loop, just reload twrp recovery and restore boot.img that you backed up for an easy quick fix.
Install drivers and adb on your PC.
Open command prompt or search 'cmd'.
Navigate to the directory with adb.exe
Download and store TWRP 2.2.2 (preferred) in the same directory where adb is located. Recommend renaming recovery file to recovery.img
Enable usb debugging on device by going to settings > about > and click on MIUI version repeatedly until developer settings are enabled. Go back and select additional settings to enable usb debugging.
Run the command: adb devices - to verify if able to connect to device (the serial number of your device will populate if so.
Run the command: adb reboot bootloader and phone device should say "Fastboot" in blue font
Run the command: fastboot boot recovery.img
Recovery will show in Chinese, click on the bottom right button to select English
May require to enter your default password you use to unlock your phone normally.
Click backup and be sure to backup system, boot, and recovery most of all so it's easy to recover your device moving forward.
Download and save SuperSU (I have been unsuccessful in getting Magisk to work at this time) onto storage device from PC to MI 8 that should appear with your Internal storage
Click on "Mount" in TWRP and unselect read-only
Click "Install" and flash SuperSU then reboot (my device rebooted one time and fully boot up the 2nd time so you're not alarmed)
Links:
SuperSU: https://download.chainfire.eu/1122/SuperSU/SR3-SuperSU-v2.82-SR3-20170813133244.zip?retrieve_file=1
TWRP: https://forum.xda-developers.com/mi-8/development/recovery-twrp-3-2-2-0703-t38126005
Appreciate any feedback, ideas, thoughts, or suggestions where all can collaborate and expand where we help each other further. Look forward to the future development of the MI 8 folks! Please note, I wanted to share the method that seemed to work best for me, but please be aware each and every single MI 8 device is not always exactly the same and the end result may vary and I'm not held accountable or responsible should you choose to follow the directions listed above. However, I wanted to share this information to help avoid any frustration going forward and save you time.
p.s. - If someone could help me figure out how to get twrp recovery to hold and not end up being replaced by mi recovery I would be most grateful as this has been an issue for me (I tried flashing, booting, and installing the img through twrp with no success). Thank you.
Click to expand...
Click to collapse
Skickat från min MI 8 via Tapatalk
what issues do you get with magisk? I was able to flash it without any issues.
superior8888 said:
Fastboot flash recovery Command should do it ..
Skickat från min MI 8 via Tapatalk
Click to expand...
Click to collapse
Yes it does. Don't know why anyone would run SuperSU though.
mekaziah said:
I thought so as well, unfortunately I just haven't had much luck with dm verity which led to a soft brick on my device. I'll have to look over the code as it may vary in comparison to other xiaomi devices.
Click to expand...
Click to collapse
MAKE SURE U HAVE UNLOCKED BOOTLOADER
here is wat i do
first i boot into twrp
(make sure u have rom.zip magisk/superuser.zip an twrp.img) on internal storage
then i wipe
dalvik cache
cache
data (NOT FORMAT)
system
then i flash
rom.zip
twrp.img
then i reboot recovery
fkash magisk.zip
then reboot system
now i have new rom an still have twrp on
-fluffy- said:
here is wat i do
first i boot into twrp
(make sure u have rom.zip magisk/superuser.zip an twrp.img) on internal storage
then i wipe
dalvik cache
cache
data (NOT FORMAT)
system
then i flash
rom.zip
twrp.img
then i reboot recovery
fkash magisk.zip
then reboot system
now i have new rom an still have twrp on
Click to expand...
Click to collapse
Would you mind stating the version of Magisk?
Strange Guide no Attention for Unlok Bl.
barrielui said:
Would you mind stating the version of Magisk?
Click to expand...
Click to collapse
16.4
magisk has been working fine for me for a while
samwise110712 said:
what issues do you get with magisk? I was able to flash it without any issues.
Click to expand...
Click to collapse
What's your ROM version? I flash twrp then magisk, bootloop...
-fluffy- said:
MAKE SURE U HAVE UNLOCKED BOOTLOADER
here is wat i do
first i boot into twrp
(make sure u have rom.zip magisk/superuser.zip an twrp.img) on internal storage
then i wipe
dalvik cache
cache
data (NOT FORMAT)
system
then i flash
rom.zip
twrp.img
then i reboot recovery
fkash magisk.zip
then reboot system
now i have new rom an still have twrp on
Click to expand...
Click to collapse
Hello how did you flash the TWRP through the TWRP ???
What version of MiUi you have ???
omek07 said:
Hello how did you flash the TWRP through the TWRP ???
What version of MiUi you have ???
Click to expand...
Click to collapse
simple put twrp.img on ur storage
then flash img from twrp
-fluffy- said:
simple put twrp.img on ur storage
then flash img from twrp
Click to expand...
Click to collapse
Yes but its asking after in which partition.
What partition you chose ?
---------- Post added at 08:26 AM ---------- Previous post was at 07:41 AM ----------
-fluffy- said:
simple put twrp.img on ur storage
then flash img from twrp
Click to expand...
Click to collapse
Could you please tell me what rom you have ???
Thank you
omek07 said:
Yes but its asking after in which partition.
What partition you chose ?
---------- Post added at 08:26 AM ---------- Previous post was at 07:41 AM ----------
Could you please tell me what rom you have ???
Thank you
Click to expand...
Click to collapse
u choose recovery
im using miui eu
magisk is running without any issue.
i am on the newest xiaomi eu beta rom and flashed magisk 16.7 without any issue right now
(after waiting horrible 15 days for unlocking the bootloader)
Ok so both of you have the xiaomi eu. I have global stable 9.5.11. so maybe that's the problem
---------- Post added at 06:30 AM ---------- Previous post was at 06:29 AM ----------
So both of you have xiaomi eu rom. I have global stable 9.5.11. maybe that's the problem.
omek07 said:
Ok so both of you have the xiaomi eu. I have global stable 9.5.11. so maybe that's the problem
---------- Post added at 06:30 AM ---------- Previous post was at 06:29 AM ----------
So both of you have xiaomi eu rom. I have global stable 9.5.11. maybe that's the problem.
Click to expand...
Click to collapse
I have the lastest global version, I cannot get the root access...
Someone tell me flash the Chinese verision then flash xiaomi.eu and magisk.
felixrao said:
I have the lastest global version, I cannot get the root access...
Someone tell me flash the Chinese verision then flash xiaomi.eu and magisk.
Click to expand...
Click to collapse
My friend i changed to the Xiaomi eu and everything worked. You dont have to flash the Chinese Version first you can go from Global to Xiaomi.eu. Just dont forget to do FORMAT data and not only Wipe Data.