Kii-L05 (Canada) - Stuck on boot logo - Honor 5X Questions & Answers

Hi everyone,
I've recently messed up terribly on the Canadian model of this phone. The model # is KII-L05 and the problem is that I'm stuck on the logo screen when booting.
I was unable to flash a custom ROM properly and have no backups. I have TWRP 3.1.1-0 installed and have tried flashing cm12.1, cm-13.0, lineage-13.0 and lineage-14.1 with the proper gapps to no success. I also tried eRecovery (with a lot of trouble getting to it using the Vol+/- because it loads TWRP 99% of the time) but it won't detect the dload/UPDATE.APP that I acquired from the Canadian Huawei support site nor will it update via wifi.
I've run out of ideas so I'd appreciate some assistance in finding a solution either getting back to stock ROM(firmware?) or a custom ROM that supports this model.
If there's already an answer posted, please pass along the link as I've come up with nothing searching and following most of what's been said before.
Thanks,

You just have an option to restore the backup if someone can share it.

shashank1320 said:
You just have an option to restore the backup if someone can share it.
Click to expand...
Click to collapse
I was hoping it wouldn't have to come to that...
For clarity, would that be using TWRP to restore the backup or using the eRecovery/UPDATE.APP method?
I'll try my luck in the file repository to see if anyone has it.

Dominic987 said:
I was hoping it wouldn't have to come to that...
For clarity, would that be using TWRP to restore the backup or using the eRecovery/UPDATE.APP method?
I'll try my luck in the file repository to see if anyone has it.
Click to expand...
Click to collapse
you should try both.
TWRP backup and dload method. any of them could work

Dominic987 said:
I was hoping it wouldn't have to come to that...
For clarity, would that be using TWRP to restore the backup or using the eRecovery/UPDATE.APP method?
I'll try my luck in the file repository to see if anyone has it.
Click to expand...
Click to collapse
Extract your update.app using a program like 7zip -- it should contain a boot.img file. Use the ADB method to manually flash the file.
While your at it, if there is a system.img file -- flash that as well.

bb709394 said:
Extract your update.app using a program like 7zip -- it should contain a boot.img file. Use the ADB method to manually flash the file.
While your at it, if there is a system.img file -- flash that as well.
Click to expand...
Click to collapse
It may not work and dload will be best option here.
Fastboot may not allow him anymore to flash anything

bb709394 said:
Extract your update.app using a program like 7zip -- it should contain a boot.img file. Use the ADB method to manually flash the file.
While your at it, if there is a system.img file -- flash that as well.
Click to expand...
Click to collapse
shashank1320 said:
It may not work and dload will be best option here.
Fastboot may not allow him anymore to flash anything
Click to expand...
Click to collapse
Your suggestions are noted.
I'll try my luck at waiting a while longer for someone with a backup until I go flashing more things.

Did you try flashing stock recovery then flashing via dload?

hassanjavaid8181 said:
Did you try flashing stock recovery then flashing via dload?
Click to expand...
Click to collapse
I mentioned in my original post that I have no backups. Unfortunately, that includes me not having stock recovery to start from scratch.
My current eRecovery doesn't recognize anything I put into dload nor does it update via wifi.
I'm currently outreaching to Huawei Canada (been more than a few days without a response) as well as friends/coworkers that may have the phone that can help with no success.

Dominic987 said:
I mentioned in my original post that I have no backups. Unfortunately, that includes me not having stock recovery to start from scratch.
My current eRecovery doesn't recognize anything I put into dload nor does it update via wifi.
I'm currently outreaching to Huawei Canada (been more than a few days without a response) as well as friends/coworkers that may have the phone that can help with no success.
Click to expand...
Click to collapse
do you have orignal firmware file for your phone?if not download it from huawei website acoording to you model number

hassanjavaid8181 said:
do you have orignal firmware file for your phone?if not download it from huawei website acoording to you model number
Click to expand...
Click to collapse
Dominic987 said:
... it won't detect the dload/UPDATE.APP that I acquired from the Canadian Huawei support site nor will it update via wifi. ...
Click to expand...
Click to collapse
No backups, that includes anywhere internal or external of the phone in question. Already tried the Huawei site and they have Marshmallow - I suspect I need anything older that's on Lollipop.

Dominic987 said:
No backups, that includes anywhere internal or external of the phone in question. Already tried the Huawei site and they have Marshmallow - I suspect I need anything older that's on Lollipop.
Click to expand...
Click to collapse
Unfortunately there are no official firmware yet for this mate. I tried looking for you but couldn't get any. Its just OTA and not full firmware that could help you with dload.

Dominic987 said:
No backups, that includes anywhere internal or external of the phone in question. Already tried the Huawei site and they have Marshmallow - I suspect I need anything older that's on Lollipop.
Click to expand...
Click to collapse
May be last option is to take it to Huawei service center they will fix it for you.

Related

Wireless Update

Hi,
I am trying to use Wireless Update to update to 20160315. It says my current version is P9000_Elephone 6.0_20160304 and no update is available. Is it possible to use Wireless Update for this or do I need to flash the ROM?
Thanks
badbobe said:
Hi,
I am trying to use Wireless Update to update to 20160315. It says my current version is P9000_Elephone 6.0_20160304 and no update is available. Is it possible to use Wireless Update for this or do I need to flash the ROM?
Thanks
Click to expand...
Click to collapse
Some had the luck with an ota update, but I think most of us flashed the new rom.
This is a bit ridiculous, Im in same boat, I cant use the FP sensor on mine until I get 0315, but it says Im up to date on 0304, I cant flash as I dont have windows. I think the best thing I can do with this phone now is put it back in its box and send it back to the retailer. Very frustrating as apart from this, its a good device.
I ended up flashing it and overall it was worth it. I ended up with a clean install - don't know if there was another way so that I didn't have to re-install everything? The process was also a bit more fiddly when using Windows 10 as I had to bypass the driver signing system by booting windows with this disabled.
Does anyone have an issue with WiFi consuming a lot of power? I've now enabled it to be always on to see if that helps as I read somewhere that it might.
According to a post on the Elephone forum, they've pulled the ota and we should expect a new one mid April.
Some users have 20160401beta, so they are working on something.
For me no OTA, you need to flash it manually with the latest flash tools. Older versions can not load the scatter file.
Best would be, if the elephone distributes the update.zip so we could copy it to the phone and install it from the update menu.
Maor545 said:
Some users have 20160401beta, so they are working on something.
For me no OTA, you need to flash it manually with the latest flash tools. Older versions can not load the scatter file.
Best would be, if the elephone distributes the update.zip so we could copy it to the phone and install it from the update menu.
Click to expand...
Click to collapse
Does installing via the update menu work? I have the zip for the 20160315 build but am unsure as to whether installing this way would work. I use a Mac so flashing via computer isn't an option...
Hello, i would like to ask how we can perform a local update from the option that there is at the phone
chtsarts said:
Hello, i would like to ask how we can perform a local update from the option that there is at the phone
Click to expand...
Click to collapse
For that you need the OTA file, which so far are not provided by Elephone.
Jonny said:
For that you need the OTA file, which so far are not provided by Elephone.
Click to expand...
Click to collapse
Then i must wait a developer to provide the OTA file because i have mac and i can't use sp flash tools?
chtsarts said:
Then i must wait a developer to provide the OTA file because i have mac and i can't use sp flash tools?
Click to expand...
Click to collapse
Thought there were windows emulators for Mac, or dual boot etc.
Sent from my Elephone P9000 using Tapatalk
Jonny said:
Thought there were windows emulators for Mac, or dual boot etc.
Sent from my Elephone P9000 using Tapatalk
Click to expand...
Click to collapse
So I finally managed to flash using my Mac, virtualbox, and v5.1604 of flash tool.
Sent from my P9000 using XDA-Developers mobile app
Hello,I had also problem with wireless updete.When I press install now, app crash.It sad wireless update shout down.
What can I do?If you have any sugesstions, please tell me.
Thanks

[Guide]Huawei Ascend XT - How to update from any version up to B180 after rooting

I'll try and keep this short and to the point. If you unlocked your bootloader and flashed TWRP and SuperSU, theirs a Good chance your phone will not return to stock and take OTA updates. Many of us have tried but for some reason the updates just fail.
Well we are lucky and someone captured and posted the 3 known updates and I'm going to show you how to flash them
New ~ All in One ~ update Instructions in Post 2
We now have a new way to do this, So the information below is just for information sake So bare with me while I get the Guide updated...
Other Files you may need​
H1611.TWRP.New.img <<- This is the New Twrp by yuweng I Highly recommend everyone use this Version
minimal_adb_fastboot_v1.4.1_setup.exe
Huawei_Android_phone_drivers(1).rar
I have been working on this for some time and I now have an ALL in One Flash solution
This will allow you to flash a Single Rom to Update or Downgrade your firmware and Rom
As with any firmware update or downgrade I'm not responsible to what happens to your phone you do this at your own risk
(rest assured I have tested all these files and my phone is fine)
The Flash instructions are the same as any rom flash on this phone
Step one is to Boot to the bootloader and boot H1611.TWRP.New.img
fastboot boot H1611.TWRP.New.img
Swipe to allow modifications to System
then choose Mount and check system and cust
Select Storage Micro SDcard
Next is install and choose your Bxxx_Full_Update.zip
Swipe to flash
Reboot
That's really all their is too it, Just choose the File below that you want to update or downgrade too
Note: The phone always loads the AT&T logo and reboots the first time and then loads normally
First boot will take you to the setup screen if you formatted data
Another thing i noticed while test flashing these files is that the Data partition becomes Encrypted after the flash
This means before you can restore a data backup or flash a Rom like CleanRom (it includes data) you'll need to Format Data to UN-encrypt it
Also some roms may need to have SuperSU flashed after the Rom or the phone may not boot the first time after the upgrade.
AS Always make a complete backup of your phone before you start any flashing
Downloads
~New~ B180_Full_Update.zip
Note about B180 - If you have no wifi or the phone won't boot simply extract the boot.img from the rom and flash it with TWRP (Install Image) or fastboot (fastboot flash boot boot.img) also the AT&T Logo is missing for now but everything else works
Thanks To @madvane20 Download >> B170 Stock Full Update with Firmware
B160_Full_Update.v2.zip
B150_Full_Update.zip
I had to make B140 into 2 flashes but it works the same just copy both files to your phone and Flash A then B
B140_Full_Update.A.zip
B140_Full_Update.B.zip
B130_Full_Update.zip
​
Huge thanks to @madvane20 for helping with the partition layouts and testing and to @worstenbrood for the Huawei Update Extractor tool
Where do I start if I have B140 rooted on my XT? Maybe some numbers or section titles would help answer that. Thanks .
divineBliss said:
Where do I start if I have B140 rooted on my XT? Maybe some numbers or section titles would help answer that. Thanks .
Click to expand...
Click to collapse
You start at the 2nd half of the updated guide B140 to B150
the process is the same no matter what version your on
So I should start with B130 stock files even though I'm in B140 rooted right now?
clsA said:
You still start at the top and substitute the B150 files where their needed
the process is the same no matter what version your on
Click to expand...
Click to collapse
divineBliss said:
So I should start with B130 stock files even though I'm in B140 rooted right now?
Click to expand...
Click to collapse
... no you would start at returning your phone to Stock B140 and continue from their
flashing the B150 firmware then the B150 stock system and /cust
We have the B150 files and the guide is updated
If I can get back to B140 stock and take the B150 OTA, which files do you need?
clsA said:
The guide is not complete ... no you would start at returning your phone to Stock B140 and continue from their
flashing the B150 firmware then the B150 stock system and /cust
We don't have the B150 files yet so it's hard to complete the guide
Click to expand...
Click to collapse
divineBliss said:
If I can get back to B140 stock and take the B150 OTA, which files do you need?
Click to expand...
Click to collapse
is that a trick question ? if you could get back to stock and take the OTA this post wouldn't be necessary now would it ?
The whole point of the thread is that no one who rooted has been able to return to stock and take an OTA
Why bother updating? Isn't someone working in Lineage for this phone?
guest_2011 said:
Why bother updating? Isn't someone working in Lineage for this phone?
Click to expand...
Click to collapse
no one has posted any threads about it
you should still try and be on the latest security patch while you phone is stock
@RN_ReFlux Thank You ! for getting the B150 backup and /cust.img
guest_2011 said:
Why bother updating? Isn't someone working in Lineage for this phone?
Click to expand...
Click to collapse
Yes, someone is working on it but it is best to have your ROM up to date. You may not see a need for it but a lot of others see a need.
clsA said:
@RN_ReFlux any luck getting the B150 backup and /cust.img ?
Click to expand...
Click to collapse
Yes, I have them, am working on zipping some of the larger files, then will upload to drive or dropbox, since I don't have developer access to afh yet.
Only think I forgot to do was get the post-root backup in TWRP. If you need that, I've already asked my cousin to perform the backup, I'll ask her to zip and upload them to me.
RN_ReFlux said:
Yes, I have them, am working on zipping some of the larger files, then will upload to drive or dropbox, since I don't have developer access to afh yet.
Only think I forgot to do was get the post-root backup in TWRP. If you need that, I've already asked my cousin to perform the backup, I'll ask her to zip and upload them to me.
Click to expand...
Click to collapse
Thanks ... I'll post the files to my AFH account if you can share them through google or dropbox ..etc
If you request developer access, it doesn't take that long to get it ........ a few hour maybe if I recall correctly .
RN_ReFlux said:
Yes, I have them, am working on zipping some of the larger files, then will upload to drive or dropbox, since I don't have developer access to afh yet.
Only think I forgot to do was get the post-root backup in TWRP. If you need that, I've already asked my cousin to perform the backup, I'll ask her to zip and upload them to me.
Click to expand...
Click to collapse
divineBliss said:
If you request developer access, it doesn't take that long to get it ........ a few hour maybe if I recall correctly .
Click to expand...
Click to collapse
Requested it about 12 hours ago
Uploading to drive now.
Sent from my SM-T530 using Tapatalk
divineBliss said:
...
Click to expand...
Click to collapse
All the files are uploaded for your B140 to B150 update...
I'll be updating the guide soon.
The steps in a nutshell are
flash your stock B140 system/boot/recovery and stock b140 /cust
force flash the dload/update.app for b150 with the dialer code
boot TWRP restore stock B150 system and dd the B150 /cust
Flash SuperSU and Factory Reset (< optional)
reboot system and it boots to a clean B150
Click to expand...
Click to collapse
Guide is updated !
Has anyone been able to follow the OP to get up to B150 from either B140 or B130? Or even B130 to B140? Thanks!
clsA said:
All the files are uploaded for your B140 to B150 update...
I'll be updating the guide soon.
The steps in a nutshell are
Guide is updated !
Click to expand...
Click to collapse
divineBliss said:
Has anyone been able to follow the OP to get up to B150 from either B140 or B130? Or even B130 to B140? Thanks!
Click to expand...
Click to collapse
Yeah me
Sent from my Nexus 6P using Tapatalk
Be careful upgrading from B130 to B140. Went from stock non-rooted B130 to B140 using the SD card update method and hidden menu. While it went through the update process without reporting an error but after auto reboot it still showed the same version but lost WIFI functionality, mac address showed mostly 00s and can't restore full backup from TWRP without errors on /data, etc.
Anyone know if there are .img equivalent of 2017-01-26-H1611.B130.stock.complete to attempt restore from either fastboot flash or dd?

[dd backup of BND-L21-8.0.0.330] xxx.img files

Just whant to share dd backup I did who are test and working for at least BND-L21.
dd rip of official OTA 8.0.0.330.
If someone have need.
Cust.img : https://mega.nz/#!q9tn2C6T!JMMSDYN5qc4BQrmKwtjifGqg26Je8SjiToPBM7wktp4
Kernel.img : https://mega.nz/#!Kg8AADgJ!PmBFU4vM1nTvcJnT-AttXBvV7IIh93xdEPgSY9kE0BE
Product.img : https://mega.nz/#!zk8glLyJ!HIKFQoEMuShRYYvm3SWeIfmpLa3LrOI_ahpJ2PDFQXc
Ramdisk.img : https://mega.nz/#!WokUmYZJ!zusLmvamHNUfEVkzn-oEg3rescsnuPG29iRUlQM3E8M
Vendor.img : https://mega.nz/#!H5VnUJxZ!rSI4rg2Hy-cNn9-I1-dMt2y0MHq45ypu2MqL_OP7SZY
Version.img : https://mega.nz/#!q0d2ASiK!20PPaQcjevG_3Hzu1qeBS3ye6FnfG9pL6htA6vy5E8c
System.img : https://mega.nz/#!ShVTHRYJ!-Ha-K9UgKahc7KkRRSRHPkpuLSC4Yr0sZ_kCzEumRs0
If you don't use BND-L21 then use this files at your own risk.
it would have been nice
if files were on some other filehost.
plz share oeminfo too
kdark said:
plz share oeminfo too
Click to expand...
Click to collapse
Wiil try and do
U think it will work on L24?
A bit of context here - my device model is BND-L34 (Mate SE) and I had tried using a method that a user posted in a Mate SE specific thread that detailed how to manually update to Oreo.
Well, that failed miserably and I ended up with a bricked device. I had tried numerous different things to try and revive it (some that I had come up with on my own) and none of them worked. Then I thought to use Multi-Tool to unbrick it with a backup I had lying around but unfortunately it was a Nougat backup.
I had almost lost hope until stumbling upon this thread. I figured I had nothing else to lose so I decided to try to restore my phone with Multi-Tool and your backup files - all except for the system image because MEGA decided to **** block me due to it being a large file (you should definitely upload them elsewhere, by the way), so what I did was use a stock system image someone uploaded in the OpenKirin RROS thread along with the rest of your backup files.
I had also gotten a stock ramdisk_recovery.img file from somewhere else (forgot where but if anyone has trouble finding a stock recovery for Oreo I can upload mine). And VOILA (hope I spelled that right)! My device is back to life on Oreo and I couldn't be more happy.
SO all in all, even if you didn't intend for L34 users to use these files, I want to thank you!
System image I used (see post #2)
[url]https://forum.xda-developers.com/honor-7x/development/rom-t3765201[/URL]
(Screenshots below in a separate post)
Had to put them in a separate post if I didn't wanna go through the trouble of moving the screenshots to my PC and uploading them there
Thanks man, it's great..:good::good::good::good::good:
XandeR180 said:
A bit of context here - my device model is BND-L34 (Mate SE) and I had tried using a method that a user posted in a Mate SE specific thread that detailed how to manually update to Oreo.
Well, that failed miserably and I ended up with a bricked device. I had tried numerous different things to try and revive it (some that I had come up with on my own) and none of them worked. Then I thought to use Multi-Tool to unbrick it with a backup I had lying around but unfortunately it was a Nougat backup.
I had almost lost hope until stumbling upon this thread. I figured I had nothing else to lose so I decided to try to restore my phone with Multi-Tool and your backup files - all except for the system image because MEGA decided to **** block me due to it being a large file (you should definitely upload them elsewhere, by the way), so what I did was use a stock system image someone uploaded in the OpenKirin RROS thread along with the rest of your backup files.
I had also gotten a stock ramdisk_recovery.img file from somewhere else (forgot where but if anyone has trouble finding a stock recovery for Oreo I can upload mine). And VOILA (hope I spelled that right)! My device is back to life on Oreo and I couldn't be more happy.
SO all in all, even if you didn't intend for L34 users to use these files, I want to thank you!
System image I used (see post #2)
[url]https://forum.xda-developers.com/honor-7x/development/rom-t3765201[/URL]
(Screenshots below in a separate post)
Click to expand...
Click to collapse
plz share your ramdisk img file i tried to find it but didn't get it
XandeR180 said:
I had also gotten a stock ramdisk_recovery.img file from somewhere else (forgot where but if anyone has trouble finding a stock recovery for Oreo I can upload mine). And VOILA (hope I spelled that right)! My device is back to life on Oreo and I couldn't be more happy.
Click to expand...
Click to collapse
I would be very interested in the stock ramdisk_recovery, could you send me the link?
Is that L21 version Indian variant?
can i please get some help with unbricking my l24 variant. i have twrp installed but it says frp is locked. twrp says i have no os
Sonny1732 said:
can i please get some help with unbricking my l24 variant. i have twrp installed but it says frp is locked. twrp says i have no os
Click to expand...
Click to collapse
If twrp works, there is a patch file that you can use to unlock frp.
MOD EDIT: LINK REMOVED
Would be helpful to understand what caused this problem though.
mrmazak said:
If twrp works, there is a patch file that you can use to unlock frp.
MOD EDIT: LINK REMOVED
Would be helpful to understand what caused this problem though.
Click to expand...
Click to collapse
ive had installed twrp and magisk the night before and had the app call lspeed downloaded, the next morning i deleted the lspeed app and restarted the device and got stuck on a bootloop so i factory reseted and now i just get the first honor screen then it reboots to the hauwei erecovery
Sonny1732 said:
ive had installed twrp and magisk the night before and had the app call lspeed downloaded, the next morning i deleted the lspeed app and restarted the device and got stuck on a bootloop so i factory reseted and now i just get the first honor screen then it reboots to the hauwei erecovery
Click to expand...
Click to collapse
Ok. Some reason twrp does not good a good job with factory resets.
I suggest flash that frp unlock.zip
Then flash stock ramdisk.img and stock kernel.img.
That will remove magisk, for now anyway.
Then try to boot. If still not, then flash stock recovery and do factory reset. But if reset again locks frp. You will be stuck.
If you dont mind resetting from fresh system maybe just reflash with hurupdater or hwota, instead of flashing stock recovery.
mrmazak said:
Ok. Some reason twrp does not good a good job with factory resets.
I suggest flash that frp unlock.zip
Then flash stock ramdisk.img and stock kernel.img.
That will remove magisk, for now anyway.
Then try to boot. If still not, then flash stock recovery and do factory reset. But if reset again locks frp. You will be stuck.
If you dont mind resetting from fresh system maybe just reflash with hurupdater or hwota, instead of flashing stock recovery.
Click to expand...
Click to collapse
i dont mind at all resetting from fresh system how do i do that
Sonny1732 said:
i dont mind at all resetting from fresh system how do i do that
Click to expand...
Click to collapse
https://forum.xda-developers.com/honor-7x/how-to/guide-honor-7x-flash-oreo-update-t3781649
mrmazak said:
https://forum.xda-developers.com/honor-7x/how-to/guide-honor-7x-flash-oreo-update-t3781649
Click to expand...
Click to collapse
thank you, ill give it a try
---------- Post added at 09:03 AM ---------- Previous post was at 08:50 AM ----------
Sonny1732 said:
thank you, ill give it a try
Click to expand...
Click to collapse
i cant download the frp unlock.zip
Sonny1732 said:
thank you, ill give it a try
---------- Post added at 09:03 AM ---------- Previous post was at 08:50 AM ----------
i cant download the frp unlock.zip
Click to expand...
Click to collapse
Ok hold on
Should be this
https://mega.nz/#!nw0wAYoA!hYtf78s0AjwRCpPo_NQ2F4LYclngNBNurJNETypSNKQ
From @KingOfMezi
mrmazak said:
Ok hold on
Click to expand...
Click to collapse
i did the HuRUpdater_0.3.zip and now i can get to the just a sec screen after i select wifi during setup but now its stuck there

Help getting back to stock

I am trying to get back to stock everything. I have a UK model, STF-L09 C432 variant. This is day 3 of pain.
1. I've downloaded various versions of update.zip from https://pro-teammt.ru/en/online-firmware-database/?firmware_model=STF-L09C432&firmware_page=0. I make sure to go for the FULLOTA-MF versions so as to get the system partition.
2. I've extracted the following paritions using the huawei update extractor tool and flashed each:
System – fastboot flash system SYSTEM.IMG
Ramdisk – fastboot flash ramdisk RAMDISK.IMG
Kernel – fastboot flash kernel KERNEL.IMG
Recovery – fastboot flash recovery_ramdisk RECOVERY_RAMDIS.IMG
3. I try to boot to recovery with VOLUME UP + POWER. Bootloops into erecovery which only has an option to "Download latest version and recovery", Reboot or Shutdown
4. I try the download option. It connects to wifi successfully then says "getting package info failed".
5. I try to boot the phone normally and the same as step 3 happens, erecovery.
I notice the FULLOTA-MF has two files, update.zip and update_full_STF-L09_hw_eu.zip. Am I meant to be extracting something from there and flashing it too?
I should mention prior to me putting on a custom rom many moons ago (openkirin one) I had to upgrade to android 8. SO it is android 8 images I have been trying to install. I don't care about losing data.
edwardmlyte said:
I should mention prior to me putting on a custom rom many moons ago (openkirin one) I had to upgrade to android 8. SO it is android 8 images I have been trying to install. I don't care about losing data.
Click to expand...
Click to collapse
Can you access stock recovery?
If you can access stock recovery then you should try connecting to your WiFi and sees if it downloads stock firmware for your device?
Sent from my Sony Xperia XA2 using XDA Labs
Unfortunately that doesn't work. Just times out with "getting package info failed".
edwardmlyte said:
Unfortunately that doesn't work. Just times out with "getting package info failed".
Click to expand...
Click to collapse
Download this service file https://androidhost.ru/6er provided by Oslo83.
To install this service file follow instructions found in 7th post by Sephiroth1311 in this forum https://forum.xda-developers.com/ho...are-huawei-honor-9-stf-l09-stock-t3696892/url].
Edit: Corrected link.
Sent from my Sony Xperia XA2 using XDA Labs
sieghartRM said:
Download this service file https://androidhost.ru/6er provided by Oslo83.
To install this service file follow instructions found in 7th post by Sephiroth1311 in this forum https://forum.xda-developers.com/honor-9/development/firmware-huawei-honor-9-stf-l09-stock-t3696892.
Click to expand...
Click to collapse
Great, I've got an SD card ordered and will give this a try when that arrives. Thanks.
Edit: It worked. Thanks!
sieghartRM said:
Download this service file https://androidhost.ru/6er provided by Oslo83.
To install this service file follow instructions found in 7th post by Sephiroth1311 in this forum https://forum.xda-developers.com/honor-9/development/firmware-huawei-honor-9-stf-l09-stock-t3696892.
Sent from my Sony Xperia XA2 using XDA Labs
Click to expand...
Click to collapse
The 2nd link is misdirected. Would you happen to have a link to a similar thread?
Thanks
Barrytoo said:
The 2nd link is misdirected. Would you happen to have a link to a similar thread?
Thanks
Click to expand...
Click to collapse
I am sorry but I cannot help you, since I do use this device anymore and I really do not want to get any other devices from this manufacturer.
sieghartRM said:
I am sorry but I cannot help you, since I do use this device anymore and I really do not want to get any other devices from this manufacturer.
Click to expand...
Click to collapse
No worries, and I can't agree with you more. I ain't touching another Honor/Huawei device ever again. I've never had this much trouble dealing with flashing with any other brand.
Barrytoo said:
The 2nd link is misdirected. Would you happen to have a link to a similar thread?
Thanks
Click to expand...
Click to collapse
I think there was a wrong period at the end of the original link.
https://forum.xda-developers.com/t/firmware-huawei-honor-9-stf-l09-stock-service-full-rom.3696892
sehome said:
I think there was a wrong period at the end of the original link.
https://forum.xda-developers.com/t/firmware-huawei-honor-9-stf-l09-stock-service-full-rom.3696892
Click to expand...
Click to collapse
Yep, you nailed it!
Thanks mate

Question Lost IMEI after root

Hello all, I was asking if you can help me with an issue here.
While trying to root my Nord 2, I flashed the wrong boot.img version (A.10, while I was already update at the A.11), losing my WiFi and Bluetooth. So to recover them, I flashed the Full A.07 firmware and went back up to A.11 flashing the various OTAs. After flashing the A.07 firmware though, I've lost IMEI and Cellular functionality, and was never able to recover them.
I've done a backup of my nvram, nvdata, and nvcfg partitions before flashing, but restoring them didn't solve the issue.
I've use this guide for root: https://forum.xda-developers.com/t/root-tool-oneplus-nord-2-oxygen-11-3-dn2103_11_a-xx-eea.4332959/
And this guide to flash A.07 and OTAs: https://forum.xda-developers.com/t/oneplus-nord-2-oxygen-11-3-dn2103-eea-rom.4331695/
Does someone have any hints? Or should I send it back to Oneplus?
Raygen said:
Hello all, I was asking if you can help me with an issue here.
While trying to root my Nord 2, I flashed the wrong boot.img version (A.10, while I was already update at the A.11), losing my WiFi and Bluetooth. So to recover them, I flashed the Full A.07 firmware and went back up to A.11 flashing the various OTAs. After flashing the A.07 firmware though, I've lost IMEI and Cellular functionality, and was never able to recover them.
I've done a backup of my nvram, nvdata, and nvcfg partitions before flashing, but restoring them didn't solve the issue.
I've use this guide for root: https://forum.xda-developers.com/t/root-tool-oneplus-nord-2-oxygen-11-3-dn2103_11_a-xx-eea.4332959/
And this guide to flash A.07 and OTAs: https://forum.xda-developers.com/t/oneplus-nord-2-oxygen-11-3-dn2103-eea-rom.4331695/
Does someone have any hints? Or should I send it back to Oneplus?
Click to expand...
Click to collapse
You done the mess even I creted simple twrp and root method you choosed the patched boot.img way and This happened.
Try to restore your full backup of nandroid using twrp. Or fist install twrp and flash non patched boot images using twrp itself
pankspoo said:
You done the mess even I creted simple twrp and root method you choosed the patched boot.img way and This happened.
Try to restore your full backup of nandroid using twrp. Or fist install twrp and flash non patched boot images using twrp itself
Click to expand...
Click to collapse
Yeah I saw there was 2 different guides, I went with the newer one but it wasn't the right choice.
Already tried flashing a stock boot image, no change. Didn't do a Nandroid backup before hand, that's my bad.
Raygen said:
Yeah I saw there was 2 different guides, I went with the newer one but it wasn't the right choice.
Already tried flashing a stock boot image, no change. Didn't do a Nandroid backup before hand, that's my bad.
Click to expand...
Click to collapse
Try all boot images and test it
File folder on MEGA
mega.nz
Must work with anyone
sakarya1980 said:
Try all boot images and test it
File folder on MEGA
mega.nz
Must work with anyone
Click to expand...
Click to collapse
Those images are the first I've tried. I've then tried with the stock boot image linked in @pankspoo post, but with still no result. My guess is that flashing V.07 on top of V.11 rewrited some others partitions that should have not be touched
Well i am not happy to tell you, but if its true that partitions containing IMEI and WiFi connections got overwritten with nonsense information then the only thing that could save your phone is full nandroid backup which you do not have. And unfortunetly dont expect anyone else to provide it as that would mean that those 2 phones would have the same IMEI and MAC address.
I would suggest that you flash stock image, lock your bootloader and send it for RMA saying that you dont know what happened. You will have like 50/50 chance that they will just replace your motherboard without much of an investigation.
Raygen said:
Those images are the first I've tried. I've then tried with the stock boot image linked in @pankspoo post, but with still no result. My guess is that flashing V.07 on top of V.11 rewrited some others partitions that should have not be touched
Click to expand...
Click to collapse
If you have europe Version of nord2, flash Version v07, then update with otas to v09, v10, v11 with twrp
@Raygen did you get through with your imei repair? i have a similar issue.
BusterCZ said:
Well i am not happy to tell you, but if its true that partitions containing IMEI and WiFi connections got overwritten with nonsense information then the only thing that could save your phone is full nandroid backup which you do not have. And unfortunetly dont expect anyone else to provide it as that would mean that those 2 phones would have the same IMEI and MAC address.
I would suggest that you flash stock image, lock your bootloader and send it for RMA saying that you dont know what happened. You will have like 50/50 chance that they will just replace your motherboard without much of an investigation.
Click to expand...
Click to collapse
Yeah, I've already contacted OnePlus and I'm waiting for an RMA.
There's just a catch: I'm not able to re-lock the bootloader without getting the "boot image is corruptd" error. But I hope it's not an issue if I send it back all stock, with just the bootloader unlocked.
sakarya1980 said:
If you have europe Version of nord2, flash Version v07, then update with otas to v09, v10, v11 with twrp
Click to expand...
Click to collapse
Tried two times already, no change.
Keden said:
@Raygen did you get through with your imei repair? i have a similar issue.
Click to expand...
Click to collapse
Send it back to OnePlus sadly.
Raygen said:
Yeah, I've already contacted OnePlus and I'm waiting for an RMA.
There's just a catch: I'm not able to re-lock the bootloader without getting the "boot image is corruptd" error. But I hope it's not an issue if I send it back all stock, with just the bootloader unlocked.
Tried two times already, no change.
Send it back to OnePlus sadly.
Click to expand...
Click to collapse
Did any way you can flash stock. Firmware using sp flash tool of mediatek just like qualcoms MSM tool used for hardbricked devices
Raygen said:
Yeah, I've already contacted OnePlus and I'm waiting for an RMA.
There's just a catch: I'm not able to re-lock the bootloader without getting the "boot image is corruptd" error. But I hope it's not an issue if I send it back all stock, with just the bootloader unlocked.
Click to expand...
Click to collapse
Well my guess is that if they take a look at it and the bootloader will be unlocked they will send it back to you rejacted. Atleast that was my expirience once with my old Xiaomi phone. So probably try flashing original firmware using some kind of recovery utility such as Sp flash to help get rid of this message?
pankspoo said:
Did any way you can flash stock. Firmware using sp flash tool of mediatek just like qualcoms MSM tool used for hardbricked devices
Click to expand...
Click to collapse
BusterCZ said:
Well my guess is that if they take a look at it and the bootloader will be unlocked they will send it back to you rejacted. Atleast that was my expirience once with my old Xiaomi phone. So probably try flashing original firmware using some kind of recovery utility such as Sp flash to help get rid of this message?
Click to expand...
Click to collapse
I would like to use Sp flash but I don't know where I could find the files for the Nord 2 to use with it. Like the scatter file and the firmware in Raw format
Keden said:
@Raygen did you get through with your imei repair? i have a similar issue.
Click to expand...
Click to collapse
Might help ! Check,.
U need to get UMT dongle , Ultimate Multi tool software.

Categories

Resources