So i have this gts5830i phone and i entered a code in the dailer that takes me to the touch firmware version and update, i clicked update and waited too much that my brother unpluged the battery to reboot it (pretty dum though :crying: ) and then the touchscreen stoped working...
I spent hours searching , i reflashed custom and stock roms on this phone, and i figured out that the only way to bring back the touch firmware is to update it again through screencasting the phone on pc. And here's the point, i want a program that can screen cast such device cz many programs only support higher versions of android. Everything is working properly adb, drivers, sdk i just need the appropriate program for it. Anybody has an idea?? Help would be really appreciated :laugh: !!!
Thanks in advance :highfive: !
(I can't afford a new phone i got to work with what i have right now so help sacretly appreciated...)
Related
hello guys need your help!
Friend was drunk, splashed his phone with water but didnt notice right away. after some time he realized what has happened and pulled battery out of the phone. unfortunately phone was installing some software update. now phone works fine but is stuck in a boot loop and cant load android. i cant connect it to pc either, says missing driver mt65xx android phone driver. phone is few weeks old, is there any way to restore it to health?
also i cant enter boot menu( power btn +volume up/volume down). phone isnt rooted, all the software is stock.
is there any way to reapir it or my poor firend has to send it on service( and pay for it)?
thanks in advance!
Hi HELP pls
HI have you managed to unbrick this phone... or i would be very thankful if you could provide me stock rom in .img format or.. if you used MTKDroidTools backup from the start of rooting. and i think i can mabey help you also if u have those
Hi
Hope you all are doing fine !
I am new to this forum and its my first post here !
I was thinking to create an account on this forum since a week, but today i had to as im in trouble
I hope i will get solution.
I have just purchased Samsung Galaxy S3 Clone (Mediatek 6575). Its Android 4.2 Jelly bean.
It was working perfectly fine only had issue that it's wifi was catching signals really weak. I mistakenly factory reset my phone which cause to no boot up animation. Its just blank when i turn on or off my phone. To fix that i rooted my phone as to get into root files i need to root it.
Since i rooted my phone the issue i am having is it says "System UI Stopped working" , "Touch wizard stopped working". Now what should i do, i am really worried.
I tried going into the CWM recovery but its not going, it was going in stock recovery before now its not even going in the stock recovery its just all blank.
Now what should i do, its okay if i don't get the bootup logo/shutdown logo but atleast i have to remove these errors.
I am not into these things much so i have no idea.
How can i unroot my phone ? Would it fix problem ?
Or what i should do to fix this issue.
My Phone hardware is Mediatek 6575 , android 4.2 jellybean.
When the error "System UI stopped workin" appears the background becomes black and the notification bar disappears.
Please help me what i should do
Thanks alot, i need urgent replies.
I hope my issue will be solved soon.
reply
Plz reply
need fix soo
Your gonna need to reflash your Rom from scratch. You will have a hard time finding it as clone devices don't use real Android versions or software.
Bat cave One
i replaced my systemUI.apk another system UI but i lost my apk file now i am getting blank screen .i have a swipe lock but it is not opening due to blank screen ,another complication it is my usb debugging is off .How can i open my launcher toget my phone back, please help me
so yesterday i upgraded my wiko cink king from 4.0.4 to 4.1.1. and installed cwm and rooted it ! today i tryed to make a factory reset from the settings menu so it reboted and showed the android logo with a loading shape on it and it keeps restarting again and again showing that logo! i tryed to enter to cwm but i can only access factory mode ! recovery mode wont respond ! i must fix it in 4hours before dad come home please help me people !
http://forum.frandroid.com/topic/13...r-les-nuls-exemple-du-king-en-jelly-bean-411/
Hopefully you can speak French (I don't, just found it and seemed like one of the few places that has a lot of info about your phone) or Google Translate can help.
well i do speak french and the forum you gave e is talking about flashing my phone. and iknow how to ! but when i plug my phone to the pc it detects it and the phone shows that android logo again then shutdown ! and then it disconnects from pc and never reboot until i remove its battery then plug it again any more help ?
ahmedselmi00 said:
well i do speak french and the forum you gave e is talking about flashing my phone. and iknow how to ! but when i plug my phone to the pc it detects it and the phone shows that android logo again then shutdown ! and then it disconnects from pc and never reboot until i remove its battery then plug it again any more help ?
Click to expand...
Click to collapse
If you know how to flash a phone,
Do you have a custom recovery installed?
Not to be rude, because I understand that when you are in a panic, you don't always think straight, but wouldn't it make more sense to seek help on a site that actually has some development for your phone? I mean the forum I linked to is going to have more people who understand the peculiarities about the phone and since you speak French, kinda seems like it'd be more helpful.
Dear All,
I hope someone can help me get out of the situation.
I am using this FEITENG HTM H9001 6 Inches China Phone.
It came rooted by the vendor.
It is a good and nice phone. And I like it alot.
After I install a "font changing" apps,
The phone auto shut off and restart and it stuck at the HTM logo.
So sad Sad.
I know I need to reflash the firmware.
So I did some search on line...............
After finally managed to install the USB's driver which I was not able for quite long....
I follow the instruction on youtube from this site.
Down loaded the flast tool - SP Flash Tool v3.1332.0.sn187
Go to needrom to get a HTM H9001 firmware.
It should be there "right firmware". Someone there on the page where i got the firmware for H9001 said that its stable after he flash it. So proceeded to download it. Safely assume its the correct rom.
Using the flashtool, I followed the flashing steps exactly untill the green sign appeared. I was looking forward to see it start again after the problem mentioned above...........
After pulling out the cables from my PC, I press the power/start button of the phone to check if its ok....BUT It did started but it only shows "whitish color screen"
I can't even see the usual green colour HTM logo when the phone was switched on but I can hear sound of the phone starting... it stays at the whitish screen. And when I touch certain part of the screen the phone seem to response...just that I cannot view the desktop and the icon.. perhaps the video driver was corrupted in some way...or could it be the wrong rom
I proceeded re-flash it again........
same result - white screen.... phone still response to " power switch when press the LCD goes off. and some responsive sounds when the blank screen is touhed...
I am here in hope for some luck in finding ways to recover my phone back to normal...
It all started from installing a font changing apps that corrupted the firmware...than perhaps my action may have complicate the situation further....
Please. Any help would be great.
Thanks so much in advance.
How can I make good back my Feiteng HTM H9001
Or did I got the wrong ROM ?
It did not stae Feiteng just H9001 .
The rom I downloaded for my phone is here for my Feitend HTM H9001.
Is this the correct rom for my phone ?
Appreciate , really needs help to get out from this problem.
I love this phone. I want to make it good again Smile
I will try to upload some image to show its current stae.
many Thanks in advance.
Desmond
So desperate..I uses this MTK Droid tools.
I turn the phone on and it detected the details on my phone.....
Is there any way to use other tools to get my phone back to working like before the "font changing apps" time .... it was working great just before with no problem at all.............
MTK droid can detec the details of my phone...........
BUT i am lost - any way to use Droid tools to save the situation ?
I attached some picture to share what I meant...
Hope some nice great guys can shed some lights so i can try to move ahead..currently really lost... newbies to android phone....
Many Thanks
Anyone can help ?
How do I redo the rom all over from scratch ?
Or can I try to reflash other rom or install say other OS on my phone ?
Just want to make it work again..............
Thanks
Repair HTM H9001
moneycow said:
Anyone can help ?
How do I redo the rom all over from scratch ?
Or can I try to reflash other rom or install say other OS on my phone ?
Just want to make it work again..............
Thanks
Click to expand...
Click to collapse
Hello friend,
if you want to recover your H9001 look this link:
movilesdualsim com htm6582
on the site will explain the steps to solve your problem.
To me it happened to me same thing that has happened to you.
And now I enjoy my H9001 more than ever.
regards
Hello everyone. I have a Wiko Harry 2 , long story short , after managing to reflash the original rom after getting the phone bricked from a failed root attempt , I noticed that the phone wouldn't accept any sim cards , checking around , I realized the phone no longer had IMEI codes. I have searched the web in every corner and every site possible , tried all suggestions and tips (mtk engineering mode crashes , mobileuncle crashes , any special phone number codes simply get deleted after dialing them , tried external pc programs) , literally nothing helps. This is why I will try once more here for answers. Yeah , the phone isnt worth much , but it hasnt been used very much. I also want to say that the phone right now is back on stock rom with root (been through hell trying to get it to work) and broken bootloader (so cant access that , and adb wont work). If anyone has any suggestion that could help would be greatly appreciated.