I have just spent the last two hours looking for a solution so I have done as much as I can. A number of the posts I have checked have been unanswered so I am hoping someone will help out with this one as I'm sure there are plenty of people that this has happenened to. I am tech savvy but un familiar with Android. I had a go at this a couple of years ago but my knowledge is limited.
Phone is my sons and as far as I know it was bought off ebay new.
Phone did an OTA upgrade and has not worked since.
Rang HTC but as we are in Australia they were next to useless.
I have got the following and would like to just get the phone working for my son. Was just going to have it as original.
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.214500021.12G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.12.401.4
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 76df2b54
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Thanks
Wayne
Hi,
I can Only say that You have to,:
Unlock your bootloader
Flash TWRP
From There Either flash a Custom ROM.
Or a Stock ROM
You will find A more general method On the web I could only point you in the correct direction.
Sent from my GT-I9060I using Tapatalk
Thats the thing I don't know what the stock rom is. I was hoping someone could steer me in the right direction. This process is not one that I am familiar with and my understanding is if I load the wrong rom then I could permanently brick the phone. Is that correct or not. I read somewhere about a super CID which I believe this phone is. Not sure what that means but a little more help would be great or to be pointed to a post that has a bit more detail of instruction would be good. I don't expect someone to do it all for me as I am prepared to read. Just need a little assistance.
Regards
Wayne
Related
Hello Dear Forum Members,
First, thank you very much for all of you for this kind of great forum support!!!
I've updated my HTC one m7 to m8, but I am living in Europe and bought an AT&T M8 from USA(much more cheaper :good: ).
1 made it unlocked via htc dev
2 made it S-OFF with Sunshine (Because firewater did not work )
3 updated radio for WWE (it's HSPDA is working much better!)
4 changed CID for My Country.
5 installed TWRP
6 flashed with And. Revolution HD (used to with my old M7 and loved it)
7 removed TAMPERED text succesfully
Help requests :
1 Do I need make any other changes to use this excellent device in Europe?
2 I could not be sure which HBOOT file is suitable for me TO REMOVE RED TEXT? (Device is AT&T but I will use it Worldwide especially in Europe)
3 It is not showing the version of OS? Why it could be?
4 I wanted to be fully updated, do you have any other recommends?
5 I wanted to look over with QPST, but it is not going into debug mode with ##3424#, what can it be?
6 I cannot leard SPC code for CDMA Workshop, How can I?
I am asking these questions, because I could not find or tried unsuccesfull attempts
Thank you very much!
D:\HTCONEM8WORKPLACE>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: 1.15.2133156.UA13G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: XXXXXXXXXXXXXXX
(bootloader) imei: XXXXXXXXXXXXX
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: HTC__M27
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 0a41237a
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.021s
No one?
skuyumcu said:
Hello Dear Forum Members,
First, thank you very much for all of you for this kind of great forum support!!!
I've updated my HTC one m7 to m8, but I am living in Europe and bought an AT&T M8 from USA(much more cheaper :good: ).
1 made it unlocked via htc dev
2 made it S-OFF with Sunshine (Because firewater did not work )
3 updated radio for WWE (it's HSPDA is working much better!)
4 changed CID for My Country.
5 installed TWRP
6 flashed with And. Revolution HD (used to with my old M7 and loved it)
7 removed TAMPERED text succesfully
Help requests :
1 Do I need make any other changes to use this excellent device in Europe?
2 I could not be sure which HBOOT file is suitable for me TO REMOVE RED TEXT? (Device is AT&T but I will use it Worldwide especially in Europe)
3 It is not showing the version of OS? Why it could be?
4 I wanted to be fully updated, do you have any other recommends?
5 I wanted to look over with QPST, but it is not going into debug mode with ##3424#, what can it be?
6 I cannot leard SPC code for CDMA Workshop, How can I?
I am asking these questions, because I could not find or tried unsuccesfull attempts
Thank you very much!
D:\HTCONEM8WORKPLACE>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: 1.15.2133156.UA13G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: XXXXXXXXXXXXXXX
(bootloader) imei: XXXXXXXXXXXXX
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: HTC__M27
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 0a41237a
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.021s
Click to expand...
Click to collapse
skuyumcu said:
No one?
Click to expand...
Click to collapse
Still no one knows nothing! about my questions?
I don't have any "expert" comments for you, but it seems you've already got everything up and running pretty well. Maybe ask in a forum that is more geared toward WWE models (?).
Hi. I am needing some help with broken voice problem. By broken voice I am saying that I can hear other callers but they cannot hear me. I think this started when I upgraded my firmware as suggested to flash a lollipop rom. The firmware upgrade was 7.19.401.22
I thought that if I was able to RUU back to stock this would fix my problem. I had some issues doing so but was finally able to RUU back to the oldest one available. still voice calling issues...
Please see my output below. Any help on this situation would be greatly appreciated.
Also - This phone was originally a t-mo phone and I am now running cricket service. I checked for OTA updates on the phone but it says none are available. Maybe the best solution would be to make a friend with an ATT sim and then OTA? Again thanks much for whatever help is given.
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.26.502.12
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4187mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
hello, i have been trying to flash my HOX+ international to stock rom using ruu-but everytime i get an error 158: IMAGE ERROR
saying that it cannot update and asks me to get the correct ruu.
i live in India so i am using this ruu:
RUU_ENRC2B_U_JB_45_hTC_Asia_WWE_1.17.707.1_Radio_3.1204.168.32_release_299722_signed.exe
i have relocked the bootloader.
cant understand whats going wrong!
here's my hox+ international info:
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.72.0000
(bootloader) version-baseband: 3.1204.171.33
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.18.707.6
(bootloader) product: enrc2b_u
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PM3511000
(bootloader) cidnum: HTC__038
(bootloader) battery-status: good
(bootloader) battery-voltage: 3896mV
(bootloader) devpower: 63
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
it is rooted with cm12 installed.
any help?!?!?
stop spamming here and start reading faq-threads
I think it would be more helpful for you to create one thread and then post everything you've tried instead of creating a new thread for each issue. This would allow people to see what you've already tried and would keep all your issues together.
Thanks and good luck,
coal686
Forum Moderator
crusader727 said:
stop spamming here and start reading faq-threads
Click to expand...
Click to collapse
can u plz give the link to the thread....the thing is all the qts i find are for at&t phones and some telus phones........no posts for international HOX+
I know its annoying seeing so many threads by me, but the thing is my only phone is useless and I can't afford a new phone.
Every reply i get for my posts are like yours asking me to read the forums and frankly I have but no solution for the international version
AndroLoby said:
Desire EYE, 816,820,826
HTC One M8,M8s, M8 EYE,E8
HTC One M9, M9+, ME, E9, E9+
Butterfly 2, 3
By LlabTooFeR
twitter sinanntopcuu
PLEASE SHARE
:laugh::laugh::laugh::laugh::laugh::laugh:
Click to expand...
Click to collapse
Hi LlabTooFeR
Thanks,
Please Can you help me out
my phone is soft bricked
I had already messed it up before i learnt about sunshine.
I was trying to get firewater to get S-off, but the link goes to sunshine.
If i get sunshine, how do i go about it. All the Roms i tried to flash failed.
***version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: [email protected]
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT442WM06190
(bootloader) imei: 358718052406613
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 7f8e91a3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
*******
My phone parameters are like this.
Please what can I do
http://dl3.htc.com/application/RUU_...01_72.02.50602A_F_release_438693_signed_2.exe
You want to run this from a PC. Make sure that your bootloader is relocked since you are S-On or it will not work.
Friendly advice - don't post your IMEI for all to see.
You do not need S-Off to install roms or mods. It just makes it easier to flash roms since you don't need to flash the kernel separately. Firewater no longer works, which is why it kept leading you to Sunshine. If you don't mind spending the 25 for it and plan on playing with your phone a lot and flashing roms often, then by all means, go for it. If not, then probably not worth it.
I spend like 3 nights searching for option or cmd to enable usb debugging on bricked phone. Nobody seems to be intrested in answering for the same. People just either ignore those question or copy paste something irrelvant. Have seen if not thousand but hundreds of such questions from users on multiple posts. hope somebody answer to my post with a possible solution. Hoping for the best.
bootloader is locked
s-on
ver Result is
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.49.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.14.401.10
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA3C4WG01080
(bootloader) imei: *************
(bootloader) meid: 00000000000000
(bootloader) product: t6ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: 0P3P51000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 4291mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d0e3b226
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Thanks and Regards,
ABS.
abs03061985 said:
I spend like 3 nights searching for option or cmd to enable usb debugging on bricked phone......
Click to expand...
Click to collapse
I don't have this device and I'm just going to provide some threads that may, hopefully, be helpful for what you are looking for. Don't be afraid to ask for some member guidance within one of them too.
https://forum.xda-developers.com/showthread.php?t=2770684
https://forum.xda-developers.com/showthread.php?t=3298412
Those may be a bit aged but, the information should still be helpful and give you a good start for resolving your situation.
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
Unfortunately this didn't work out for me. Anything or anyone else who can help me out please.