Hi guys,
Can someone help with this one ?
Phone for some reason won't start and stay on starting logo "samsung" until battery is empty.
I tried to recover the phone using last version of Odin and/or Smart Switch but once the firmware is pushed to the phone and the blue screen "installing system update" appears it fails all the time at 32% and system then restart and back to "Samsung" logo until battery is empty.
Tried Wipe factory reset and cache, tried to install older firmware version but issue still persist.
Actually with Android Recovery 7.0/NRD90M/G925FXXU5EQH7....
Related
Hi, I hope you can help me as I am clueless about my phone...
I had the stock 4.1.2 firmware on my phone and wanted to update to Slimkat 4.2, so I first flashed the Siyah-s2-v6.0b5 kernel, check if the device is rooted and booted into recovery.
In recovery I did the factory reset, wiped the cache and formated the system partition.
Then the mistake happened and instead of flashing the Slimrom firmware I kept my finger to long on the swipe enabled recovery and selected "Reboot now" by mistake...
Basically since then my phone can only enter the Download mode (at least). I cannot enter recovery and I cannot boot it.
I flashed the Stock 4.1.2 firmware again but the problem remains. Directly after flashing the firmware when the phone gets rebooted I can see the white Samsung logo (where the yellow triangle would appear with a rooted kernel), then instead of showing to boot animation it switches to the charging screen but it does not charge (battery is and keeps grey).
I also put in another battery just for the case but that didn't change anything of course...
I hope you can help me, else I have the first brick for my wall of shame...
P.S. The stock firmware I use is "I9100XWLSD_I9100DBTLS7_DBT" from sammobile.
Can you still boot to download mode? If not, then look for a USB JIG.
I have a Tmobile GS6 Edge,My problem is this I was restoring a TWRP backup, coming from [ROM][5.1.1][OF8] OZOP EDGE. I used this Backup numerous times. But the last restore sent me into bootloop. I'm on OF8 but I ran an OF6 tar file through odin (it's the only one I can get to pass and run successfully). Heres what happened I connected my phone to computer, odin recognized it. hit start. ran successfully. rebooted, android guy came up briefly and said installing system update, then it changed to "Erasing..." then it rebooted again. Now I'm stuck in bootloop. I can boot to recovery and it says installing system update each time I boot to recovery, but selecting reboot system there shows a no command error. I force the phone to power off... power on again to bootloops.
smart switch didn't recognize the phone for a reset so I decided to go with the ODIN method and now i'm lost. I read to reboot to recovery, factory reset in recovery, power down option in recovery but I'm still in bootloop Hell. Just flashed G925TUVU3DOI1 with ODIN, same issue, wont boot past Samsung logo and now I am stuck with OI1 firmware. It will not allow me to downgrade to OF8 or OF6 for example. I have created and flashed successfully my own bootloader.img.tar file with Modem.img.tar.file as suggested. And yes im still stuck at Samsung logo. Any ideas? Please help. Update: I used the emergecy recovery option with Samsung smart switch and..... Blinking logo as usuall
I have an SM-925A that has never been rooted or had custom rom installed and it is stuck on the at&t logo after a random reboot happened. Unfortunately there is data on the phone that needs to be recovered, specifically photos that were not backed up. I've had no success with getting this phone to boot back up. I'm more interested in recovery the data then fixing the phone.
Current Symptoms:
Phone boots
Shows Samsung logo
Shows white background with AT&T Logo that animates for a moment
Stays stuck on this screen indefinitely.
Attempted solutions:
Volume Down and Power button reset attempted multiple times with same result after reboot
Draining battery entirely until the phone shuts off, charging and then booting back up, same result
Wipe cache partition from android recovery (stock recovery)
Attempted to sideload teh 6.0.1 OTA update (SS-G925AUCU3BOJ9-to-U3CPD6-UP) , but the phone is already updated and i got this message:
"Package expects build fingerprint of samsung/zerolteuc/zerolteatt:5.1.1/LMY47X/G925AUCU3BOJ9:user/release-keys or samsung/zerolteuc/zerolteatt:6.0.1/MMB29K/G925AUCU3CPD6:user/release-keys; this device has samsung/zerolteuc/zerolteatt:6.0.1/MMB29k/G925AUC"
"E:Error in /sideload/package.zip"
"(Status 7)"
"Installation aborted"
Any suggestions on how to recover the photos on this device? Again fixing this device is not the issue, its recovering the photos.
Have you tried to connect to smart swich pc?
Sounds like stuck in a bootloop and the only fix is flashing stock firmware.
One thing to ask... did you use google photos? It should have them backed up if so?
Sent from my SM-G925F using Tapatalk
No google photos was turned off for some reason. Can flashing stock firmware be done without wiping the data?
cmbaker82 said:
No google photos was turned off for some reason. Can flashing stock firmware be done without wiping the data?
Click to expand...
Click to collapse
Unfortunately not mate. As when device boots up you will have to set up as new phone or restore from backup. But as you said google photos was off.
Stock firmware will wipe everything.
Have you tried connecting to pc and opening as folders? Can you connect to pc with latest drivers?
i had my phone for about 2 years, it has been rooted ever since i got it and its running custom rom and custom recovery CM 13 on android 5.0.1 and TWRP . about a week ago i was charging my phone, when i unlocked it, i'm unable to go to the home screen because whenever i do that, google app crashed and the phone redirected me to the recently used app tabs, then i tried to reboot my phone and it went to safe mode but then i restarted it and its stuck on bootloop. so i let it be for a while, then it show the "android is starting" tab and "optimizing app number "xxx" out of "xxx" and after it finished, again it is stuck in CM's logo. however, then i put my phone to fastboot an restarted it and i dont know, it turned on again after 2 boot loops. a week after, my phone ran out of battery so i tried to turn it on but it wont , after reading threads on the internet, it suggested me to erase the cache and the dalvik cache. so i did and it turned on. today, i ran out of battery again and i erased both cache and dalvik cache, but it wont turn on.. i have no idea what's going on with my phone, and im a newbie so please go easy on me thank you.
Hi. My T825Y (Open line XTC Philippines version) suddenly shows black screen after booting. Right after the "SAMSUNG" boot animation, the screen shows blank but I can pop up the power menu and it still shows. The "show screen touches" can also be seen when touching the screen. I tried clearing cache, booting in safe mode, but still no luck. I also notice that the back of the tab is very warm.
I just wanna know what caused this.
Planning to dirty flash the firmware T825YDXU2BRG3 to restore the device again. Thanks.
P.S. Stock recovery works and also the bootloader.
UPDATE: Tried flashing latest firmware using ODIN but still the same problem...
UPDATE 2: Wiped data using stock recovery and it booted fine. So much hassle for updating a stock non-rooted device...