since I have lg g3 ls990 which is running msm8975ac chipset and its bricked... I put it In QDloader by shorting the pins but in board diag there is no option of ap for msm8975ac but its for msm8974ac..
I am so stucked please help me..
Related
Hi guys,
I recently hard bricked my phone. When I connect it to the PC, Windows recognizes it as Qualcomm QHSUSB_DLOAD 9008 (COM 3). I tried unbricking it with the BoardDiag3.99 tool provided by kryptonite but it didn't work. Do you have any other ideas?
Thank you in advance!
Hello everyone,
i read this thread http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359 and try to unbrick my hardbricked D855. I recently installed Marshmallow 30c and then it bricked. As described in the guide i need the TOT File belonging to the used firmware. Is it possible to use the 30b files? Any other suggestion?
Best regards
Hi
Did you managed to unbrick your lg g3 ?
I am having the same problem
No boot, No recovery, No fastboot or download mode working, phone is completely in dead boot state,
and is recognized as lge androidnet usb serial port, when connected to PC
not as Qualcomm HS-USB QDLoader 9008 mode,
kindly help me if you can
I've sended to LG under warranty. I'm excited if they repair it.
If you have no warranty then follow the following, it's very good. Google for "open-freax.fr lg g3" and follow the guide.
Hello, I have Allview x1 xtreme mini phone (it's clone of iuni u2). This phone have msm8x74 (probably msm 8274) chipset. My device is hard bricked. When I connect it to PC first time ,I have new qdloader (all partitions was displayed) so I format emmc for booting device in to old qdloader. After that my phone was displayed as ZEUS Flash Device ,and display as compatible driver QDLoader 9008 ,but when I use QDLoader 9008 and QFIL ,application can't find Sahara version (Sahara Version:0) ,when I use ZEUS and S1Tool I have this massage about not supported hardware id and hash. (for QFIL I used prog_emmc_firehose_8974.mbn or prog_emmc_firehose_8936.mbn file and for S1TOOL I used SIN_FILE_SET for C6802 xperia z ultra). Help PLS. Sorry for bad english.
It's the following, I have a cell phone LG L70 D325f8 here and it looks like it's bricked.
Does not turn on, the screen you are loading does not appear.
But by puglaring the cable on the phone and PC, it recognizes the Qualcomm HS-USB QDLoader 9008 driver.
He wanted to know if he had any hope of recovering?
you MAY BE able to recover it via re-programming the eMMC via USB. No special tools require. Just some free programming tools from QUALCOMM. PM me if you still need help.
My phone is currently not displaying the screen, can not be charged, only on Qualcomm 9008 HS-USB mode. Please help anyone. :crying: