Redminote 4 SD have gone to boot loop after a custom rom ,after that i used different methods like fastboot miui rom and .zip miui rom nothing seems to work can anybody have a solution?(device strats and after boot into mui for one min and restrats itself) most of the cutom roms has been used nothing have a soluition?
teja.asodi said:
Redminote 4 SD have gone to boot loop after a custom rom ,after that i used different methods like fastboot miui rom and .zip miui rom nothing seems to work can anybody have a solution?(device strats and after boot into mui for one min and restrats itself) most of the cutom roms has been used nothing have a soluition?
Click to expand...
Click to collapse
If you were able to boot into TWRP, reboot to recovery > wipe everything > flash this firmware : https://androidfilehost.com/?fid=889964283620754602, next flash any custom rom (download any rom from development section), flash Gapps > reboot! Lemme know how it goes. Good luck.
Not worked...problem remains same
Just download Lazy Flasher .Zip file. and install it via twrp after flashing custom rom .
Your problem will solve for sure.
same happens for me since yesterday. I was using a custom rom since some time and without changing anything after reboot I am running into the same trouble.
Have tried to reinstall official miui rom, lock bootloader etc.
I am afraid this might be a hardware failure.
Hi,
was able to fix my note 4. Have installed twrp 3.1.1-8.0 on my second note 4 and created a backup of all partitions to sd card. Then I have adjusted the serial number of the stored backup to match the one of the broken note 4. After restoring the whole device with the backup files from the working device the reboots are gone.
But it seems like now IMEI, MAC address and Bluetooth address are invalid and/or not correct. Was able to fix at least IMEI.
Have not identified any further issues so far.
BTW: from inside twrp recovery the phone never rebooted.
it seems to be a problem with firmware without firmware the device will boot fine but there wont be bt, fp , calling, sound, wifi etc.
but with firmware it will just bootloop.
Related
Hello!
I had problems with my lenovo s820 network signal so I tried to flash different roms. My phone is CN version, I downloaded firstly older rom, but network coverage was bad again so I flashed kitkat from needrom.
It was working fine but problems with network still persisted so I tried to flash the backup of the rom that came with the phone. It was working before, but now I am stuck in animation logo and phone stays there, no restart no nothing.
I downloaded the rom through SP Flashtools Download (DA DL Checksums).
Little help will be much appreciated. Thank you!
The original rom that came with the phone was 1.0 1427 ( I think). I made a full backup of it through sp flash tools and after that droid tools (like the guide here in the forum). After that I flashed vibe 2.0 latest from needrom (I flashed it through CWM and it worked great). Since I couldn't root it I tried to flash back my older rom (that came with the phone). I did it with 3.13 with DA DL Checksums. After that when it didnt work I tried same with latest flashtools (5.13).
Someone suggested that I make factory/data reset and wipe cache but problem is I have no recovery on the phone (it enters factory mode). WHen I try to flash recovery with the scatter inside the recovery it says error 8038 (also for another roms). Do you think this is the solution of the problem and is it possible that I use the scatter file from my backup of the initial rom (untick all except recovery) and select the recovery image to install?).
I am afraid that I replace something and make things even wors.
Edit: The backup is working since I already did 2 flashes from it before.
Best Wishes!
Help me please, I have my Le Max 2 bricked, I got it already with twrp and rom cuoco installed, everything working perfectly when I decided to change the rom and put the small eui, so that during the configuration of the aroma I ended up selecting to clean everything I installed the flashback 1.9, I did the procedures and everything was happening without problems, after installing the twrp of the cuoco I tried to flash the small eui Again and again without success and then things got worse because the device started to stay in bootloop then with the blue led on, so I started to search here in the forum a solution, and I saw the recovery twrp 5.8 teamspain, and I did The installation by fastboot (since it is the only thing I have access to at the moment), and I managed to flash the twrp, I did the reinstall procedure of the cuoco rom, everything was going well and nothing from bootloop until when i I started the system in the part of choosing the language I took a while to make the settings and when I came back it was already the device with the screen erased and with blue led again, already tried to reinstall the rom by flashone and without success, already tried to install the Twrp again and nothing too, I do not know what to do being that I only have the fastboot to try something, can anyone help me? I do not know what to do here in a topic that could extract a rec.img from the zip of eui.58.014s but I do not find this rom for download nor the zip file, if anyone can help me I'll be grateful. Well, I'm giving up hope and sorry for English.
RaphaBraga23 said:
Help me please, I have my Le Max 2 bricked, I got it already with twrp and rom cuoco installed, everything working perfectly when I decided to change the rom and put the small eui, so that during the configuration of the aroma I ended up selecting to clean everything I installed the flashback 1.9, I did the procedures and everything was happening without problems, after installing the twrp of the cuoco I tried to flash the small eui Again and again without success and then things got worse because the device started to stay in bootloop then with the blue led on, so I started to search here in the forum a solution, and I saw the recovery twrp 5.8 teamspain, and I did The installation by fastboot (since it is the only thing I have access to at the moment), and I managed to flash the twrp, I did the reinstall procedure of the cuoco rom, everything was going well and nothing from bootloop until when i I started the system in the part of choosing the language I took a while to make the settings and when I came back it was already the device with the screen erased and with blue led again, already tried to reinstall the rom by flashone and without success, already tried to install the Twrp again and nothing too, I do not know what to do being that I only have the fastboot to try something, can anyone help me? I do not know what to do here in a topic that could extract a rec.img from the zip of eui.58.014s but I do not find this rom for download nor the zip file, if anyone can help me I'll be grateful. Well, I'm giving up hope and sorry for English.
Click to expand...
Click to collapse
Are you able to boot into TWRP recovery again? When you were in TWRP, did you do wipes first before tryin to install a ROM?
Yes I did the wipes, so now I do the twrp flash only that nothing happens, type appears until the installation all right but at the moment of starting the twrp it erases the screen and the blue led
Try EUI or LineageOS that I have linked below. Both are for the x829:
https://drive.google.com/drive/folders/0B_jI7m27ljxhVmtQWmx5NVF3NzA?usp=sharing
It might be helpful if you make of video showing what you are attempting, and what is happening on the screen of your phone too.
You might want to reinstall coco twrp. Also make sure the rom you flash has downloaded fully(that happened to me a few times, corrupt downloads). If rom file is OK it should flash correctly, otherwise you get the blue led
Sent from my Le X829 using Tapatalk
luisoman2000 said:
You might want to reinstall coco twrp. Also make sure the rom you flash has downloaded fully(that happened to me a few times, corrupt downloads). If rom file is OK it should flash correctly, otherwise you get the blue led
Sent from my Le X829 using Tapatalk
Click to expand...
Click to collapse
I have the official version twrp running on my X829. It works flawlessly.
https://twrp.me/devices/leecolemax2.html
Specifically ----------> https://dl.twrp.me/x2/twrp-3.1.1-0-x2.img.html
Hello everyone,
I have a Mi 8 Lite running MIUI 20.1.21v10-11 and I noticed today that I can't delete or move files in "Files" - the MIUI file manager. I noticed some time ago that my permissions were reset or something because some apps were asking about permissions for this or that. How should I go about fixing this? Is it an issue with permissions or is it an issue with my SD card. I tried downloading a few times via Chrome the update on my phone but the phone would freeze up during the download and I would have to reboot.
Next issue is that for a few updates now, if I put the call on speaker or I use my bluetooth headphones, people say that can hear themselves. I've read up that several people had problems with this but I still don't know what the real issue is and how to go about fixing this issue. I did not have this problem before or when I first bought the phone so it can't be a hardware problem, right?
https://www.getdroidtips.com/android-10-xiaomi-mi-8-lite/
Try to install the latest rom from here.
Be carefull. Install the rom using your recovery. I recomend pith black recovery latest version you can get it from here : https://www.google.com/amp/s/forum....nt/recovery-fork-twrp-mi-8-lite-t3965708/amp/
That recovery support ota update.
Don't wipe anythng if you are on a stock rom. Just flash the ZIP update .
If you want to root your phone.. After flashing the rom..
Don t flash yet magisc. Boot the phone. Let the phone finish the update. Then boot again recovery. Flash magisc 20.3 and reboot your phone. Wait for 2-3 minutes. It won't boot. Don't worry go again at recovery and format your data. At the wipe tab tap format data. After that go and reboot your device. It will Take a while so be patient. When the phone boot's finish the setup wizard and Then you can see the magisc îs installed and you got root. Read carefully. And fallow the steps i said. Don't miss something. Don't try to install the rom with mi flash tool. It's. A recovery rom. Not fast boot rom. Good luck, ?
So I recently tried to unroot my device with flashing official ROM on it. Apparently I used the wrong file because my phone got bricked. I tried using XiaoMiTool by Francesco but it didn't help. I spent a lot of time trying to fix it so ill post what worked for me. I downloaded a lot of ROMS but none of them worked for me there was either flash error or device mismatching and I couldn't find right flash official software anywhere. I downloaded another ADB fixing program which worked, I downloaded Szaki/XiaomiADB fastboot tools which worked perfectly. I simply connected my phone searched for my phone code name (tucana) downloaded ROM from there, wiped all data off and finally flashed OS on my device. I also have a question, are there any android software fixing programs for phone repair companies or something similar?
Have good day and stay healthy,
MX8MC8
id suggest to unbrick with mi flash tool.
I did that always when i was stuck on something, it ofcourse removes your data but saves the device so its still the profit probably... After succesfull rom installation you can flash again.
Also you do this in fastboot mode
When I was stuck in the same way the solution I found was to flash whatever rom then when the phone bootloops, go into recovery, and format data. Afterwards it will boot to startup screen and take forever to load up. Anyway that is my solution, before that I would have to flash stock recovery to boot for the first time then flash a custom recovery back.
Hi there,
Not sure what happened - I'm using my Tab S3 (SM-T820) for ages in the same (stable) configuration - rooted Stock, no changes/installations for months.
This morning it was in Odin/Download mode and I cannot boot into system.
I can get into recovery (TWRP), but I cannot boot into system from there either, it always returns to Odin (tried wiping Cache/Dalvik, didn't help).
For now my only idea is to let it completely discharge, charge again and give it another try.
No buttons appear to be stuck.
Any ideas or suggestions, eg sth I could check in TWRP to see what's going on?
(hopefully nothing wrong with the system partition).
Note - I'm only familiar with the typical TWRP functions needed to install custom firmware, haven't used it for much else. Obviously would prefer not to destroy my (stable) setup and spent a full day re-installing everything
Thanks a lot for your help everyone!
@Whoooo? Backup whatever possible with TWRP onto external storage (SD or OTG).
Check if file manager can access download/DCIM folders and save them as well.
Although the charging thing might help I wouldn't set my hopes to high.
Probably somethings wrong with system or boot partitions or any file needed by them.
I'm afraid you will have to reflash stock via Odin, root again and try if restoring TWRP saved Data works.
That would reduce setting up time.
bmwdroid said:
@Whoooo? Backup whatever possible with TWRP onto external storage (SD or OTG).
Check if file manager can access download/DCIM folders and save them as well.
Although the charging thing might help I wouldn't set my hopes to high.
Probably somethings wrong with system or boot partitions or any file needed by them.
I'm afraid you will have to reflash stock via Odin, root again and try if restoring TWRP saved Data works.
That would reduce setting up time.
Click to expand...
Click to collapse
Hi there,
Thanks a lot for your reply - yes, I will try that once the complete discharge is finished.
Reflashing stock - could cause this any troubles as it's already unlocked/rooted?
Or is there a chance dirty flashing the Tweaked Stock ROM could work, too?
Tablet was still on the original Stock it came with, but rooted with magisk and manually debloated...
Thanks again!
I think Odin won't care about unlocked bootloader.
But might be necessary to unlock again.
Dirty flashing afaik only works with TWRP so only flashing of zip or img files possible.
Except you sideload although Idk if that's possible on Samsungs.
Dirty flashing of a before the problem arose made backup might work.
Did you debloat while already installed or externally?
What file format does it have?
My T825 uses the debloated ROM by rorymc628 which can be flashed with TWRP as it's a zip file.
bmwdroid said:
I think Odin won't care about unlocked bootloader.
But might be necessary to unlock again.
Dirty flashing afaik only works with TWRP so only flashing of zip or img files possible.
Except you sideload although Idk if that's possible on Samsungs.
Dirty flashing of a before the problem arose made backup might work.
Did you debloat while already installed or externally?
What file format does it have?
My T825 uses the debloated ROM by rorymc628 which can be flashed with TWRP as it's a zip file.
Click to expand...
Click to collapse
Hi there and thanks again -
Took me a while to try everything but finally it's working again.
Complete battery drain didn't help, but dirty flashing did - once I got the correct version.
Basically made a nandroid backup, then flashed the tweaked rom over my existing one, starting with newer versions down to older ones.
So, flash, reboot - didn't work, restore nandroid (all), flash slightly older rom....
Till it started booting with v2.0 (probably matching my existing rom close enough).
Had to reflash Magisk as the 2.0 Rom included didn't match my Magisk Manager, but now my Tab S3 is working again!