As of 8/28/18 SamFAIL is officially depreciated. There is no new root method at this time and i will not be helping find another one. Bootloader V3 is the final version of SamFAIL for Note8. DO NOT PM ME ASKING FOR HELP!!!
Introducing:
SamFAIL!
Root for the USA Snapdragon Samsung Galaxy Note 8! (N950U,N950U1,N950W)
WARNING! The latest Note8 software update(U4XXXX) blocks samFail(All carriers.). DO NOT UPDATE IF YOU WANT ROOT!
SamFAILv3 Has been Released There is an addititonal step in Part 1 for V3 ONLY.
Bootloader check guide(Green can be rooted, Red can not be rooted)
Last 6 of firmware version(X can be different):
U1XXXX=Bootloader V1
U2XXXX or S2XXXX=Bootloader V2
U3XXXX or S3XXXX=Bootloader V3
U4XXXX or S4XXXX=Bootloader V4
U5XXXX or S5XXXX=Bootloader V5
Disclaimer 1: Although this method does not trip the "Knox Flag" you are still taking a risk by rooting your device. We are not responsible for your blazing fast smartphone with root! Let's hope this one doesn't catch on fire!
DISCLAIMER 1.5: THIS IS NOT FOR EXYNOS OR CHINESE MODELS!
First and foremost, SHOUTOUTS!
- @partcyborg for finding the root method!
- @me2151 for testing on Note 8 and facilitating root on the Note 8!
- @elliwigy for... Shenanigans! And thread template
- @jrkruse For the deodexed system!
- @Chainfire He will be missed! (no he is not dead, just retired.)
- Samsung for the amazing phone and leaving rediculous loopholes open for us to root!
Disclaimer 2: The method to root should be pretty straight forward as the hard work has already been done for you. With that being said, you will need to know how to download files from the internet, extract a zip file and to use ODIN. That is basically it! Oh yea, BACK UP YOUR INTERNAL STORAGE AS THIS WILL ERASE IT! PLEASE BE SURE TO READ ALL THE INSTRUCTIONS THOROUGHLY BEFORE ASKING FOR HELP!
Prerequisites:
- SamFAIL Note 8 Pre-Rooted System.tar/PIT File Zip (in Post #2)
- SamFAIL Note 8 PART 2 Firmware Zip (also in Post #2)
- Comsey ODIN and Normal ODIN (Found in Post #2 Aswell)(Normal ODIN is just in case)
- Well your Note 8 of course, Need to be by a PC and ready to use Download Mode!
Part 1 Instructions:
IF YOU ARE ON U3(Rev3) bootloader you must Flash SamFAILv3_N8_FIRMWARE first THEN do part 1 THEN part 2 again. This IS a requirement. Not optional. Otherwise for U1 and U2 proceed as normal.
1) Unzip the SamFAIL Note 8 Pre-Rooted System.tar and PIT File to your PC.
2) Have Comsey ODIN up and ready. Place your Note 8 into Download Mode and Connect to PC
3) In the AP slot, select the Pre-Rooted system.tar.
4) Now go to the PIT tab(Click OK or close on the warning box) and click and navigate to the PIT file you also just downloaded and select it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5) On the OPTIONS tab, you will select the following: Auto Reboot, F. Reset Time, NAND ERASE ALL, and Re-Partition.
6) Once you have everything in place and the correct options selected, press START.
7) ODIN will say FAIL at the end of the flash and the phone will have rebooted to upload mode saying "Unknow Error". Don't fret however, the system should have still been written!
8) You will have to get the phone back into Download mode( Hold Power, VOL- and bixby together and the phone will reboot to download mode and tell you its in emergency mode. THIS IS NORMAL.) and then proceed to Part 2 Instructions!
Basic ODIN flashing here guys... Not rocket science!
Part 2 Instructions:
1) Download and Extract the SamFAIL Note 8 Part 2 Firmware Zip to your PC
2) Click Reset in Comsey ODIN or close it out and re-open it so it is COMPLETELY cleared out
3) Now select the firmware. BL goes in BL, AP goes in AP, CP goes in CP, dont press start yet!
4) Now, this time we ARE NOT SELECTING A PIT FILE, We should just select Auto Reboot and F. Reset Time. DO NOT DO NAND ERASE ALL OR YOU WILL HAVE TO START OVER.
5) Once you got the partitions in place and the right options selected, Press Start!
7) Once phone boots up, Setup your device as normal and proceed to the SuperSU app. It may ask you to update the SU Binary. Select Normal method and let it do its thing. Follow its instructions then SU should say it was Successful in updating and it needs to reboot(You may have to do it multiple times. I believe its 2 or 3 times then its good) ENJOY SamFAIL ROOT!
DISCLAIMER 3:
* SamFAIL DOES NOT TRIP KNOX
* Boot.img is SECURE which means you MUST use SYSTEM ROOT. (Similar to SamPWND)
* This means that MAGISK DOES NOT WORK
* Which also means SAFETY NET FAILS. So any apps you enjoy that require passing Safety Net will most likely not work while you are rooted with SamFAIL
* Again, similar to SamPWND, this root method uses a factory binary boot.img which is necessary to boot the modified system. THIS MEANS BATTERY ONLY CHARGES TO 80% (Thanks Samsung.)
* SamFAIL DOES NOT UNLOCK YOUR BOOTLOADER AND DOES NOT SIM UNLOCK YOUR PHONE.
* This *should* in theory, work for other Snapdragon Models of the Note 8. If you have another model and are successful please post so we can add "support" for other models.
Back to Stock?
- Download the full STOCK firmware of your choice.
- Flash it in ODIN/Comsey ODIN as you would any other time!
- It will take a few reboots for the "custom" splash screen to go away.
[/CODE]
BUGS!:
- Screen sometimes will be bugged out. Fix by turning screen off and back on. Caused by Factory boot files.
- Possibility of Bixby Home crashing.
- SuperSU may ask you to update it multiple times.
Donations:
As always, the devs have been hard at work recently to bring you root. Donations are definitely NOT REQUIRED but if you feel generous and want to spot the devs a few bucks for their hard work you can donate to this Paypal Address:
Donations
DOWNLOADS will be in POST #2
UPDATES will be in POST #3
As always, ENJOY ROOT and thank SamFAIL for making it all possible!
Telegram Group has been closed.
P.S. See why we called it SamFAIL now? Massive fail on Samsungs part.
XDA:DevDB Information
SamFAIL, Tool/Utility for the Samsung Galaxy Note 8 (2017 Phone)
Contributors
me2151, partcyborg, elliwigy, jrkruse
Version Information
Status: Beta
Current Beta Version: V2
Created 2017-10-08
Last Updated 2018-08-28
DOWNLOADS:
Main files:
Odin
---------------------------------------------------
SamFailv1= Bootloader Revision 1(u1)
---------------------------------------------------
N8_SamFAIL_SYSTEM Deodexed
N8_SamFAIL_FIRMWARE
---------------------------------------------------
SamFailv2= Bootloader Revision 2(u2/s2) WARNING ONLY USE IF ON Rev2 Firmware. YOU CANNOT DOWNGRADE BACK TO Rev1!
---------------------------------------------------
N8_SamFAILV2_SYSTEM Odexed
N8_SamFAILV2_FIRMWARE
---------------------------------------------------
SamFailV2.5= Bootloader Revision 2(u2/s2) WARNING ONLY USE IF ON Rev2 Firmware. YOU CANNOT DOWNGRADE BACK TO Rev1!
---------------------------------------------------
SamFailV2.5_N8_FIRMWARE
SamFailV2.5_N8_SYSTEM_Deodex
---------------------------------------------------
SamFailV3= Bootloader Revision 3(u3/s3) WARNING ONLY USE IF ON Rev3 Firmware. YOU CANNOT DOWNGRADE BACK TO Rev1 or Rev2!
---------------------------------------------------
SamFailV3_N8_FIRMWARE
SamFailV3_N8_SYSTEM_Deodexed
Reserved
MINI UPDATE:
CHANGLOG:
SamFailv1:
Initial release---
Deodexed system
better method
SamFailv2:
Initial Release---
Added support for incrimented bootloader Firmwares.
Odexed
Uses same method as Rev1
SamFailV2.5:
Deodex
Based on BQL5
Camera fixed
ATT Calling features fixed(ONLY IF YOU DO NOT FLASH A CSC) thanks to @jerrycoffman45
VZW Custom CSCFeatures thanks to @louforgiveno
ATT,SPR,TMO re-enabled callerID and spam protect.
DO NOT FLASH CSC IF YOU WANT CUSTOM FEATURES!
Setup freeze at checking for updates fixed.
SamFAILV3:
Support for BLv3 Thanks to @ililaoban for confirming it still works on U3
Deodex
Based on BRA9(Jan Sec patch)
Mini Update#3:
If on Oreo revert back to stock Nougat first. the oreo bootloader patches samfail.
Nice!
Nice work gents.
Sent from my SM-N950U1 using XDA-Developers Legacy app
Good Job Guys!! Another Glorious Day!!
T-Mobile users.......
Once you have root you might be interested in some things here....
https://forum.xda-developers.com/showthread.php?t=3686535
Awesome work! Now to get some stuff working
Sent from my SM-N950U using Tapatalk
Nicely done! Thanks for posting!
Thank you so much ! Love you all <3
Sent from my SM-N950U1 using Tapatalk
Great work for a great team...thank you all!
He'll yea boys very nice
Hell yea... thank you ... time to start the Patty
That was quicker than anyone thought. Well done.
- Screen sometimes will be bugged out. Fix by turning screen off and back on. Caused by Factory boot files.
Click to expand...
Click to collapse
Can anyone elaborate on how bad and frequent this is?
xtremebuzz1 said:
That was quicker than anyone thought. Well done.
Can anyone elaborate on how bad and frequent this is?
Click to expand...
Click to collapse
The exact condition is a Race condition caused by the AOD initilizing. Basially the normal screen turns on in AOD mode. Maybe once or twice a day. It happens when you turn the screen on right before the AOD starts. Hard to get timing consistantly
xtremebuzz1 said:
That was quicker than anyone thought. Well done.
Can anyone elaborate on how bad and frequent this is?
Click to expand...
Click to collapse
i dont have note 8 but my S8+ maybe once or twice a day
Awesome!!! U guys are Android Kings!!! )))
Sent from my SM-N950U using Tapatalk
Yall are amazing. Thank you x1bn
This is pretty awesome.... Can someone with AT&T report whether they can get Volte and WiFi Calling working with this mechanism
Its pretty important to me
Was hoping not to wipe until I found out of it would work
Hell to the yeah!!!! Thanks man
Related
I bring to you 100% stock fully deodexed builds of Lollipop 5.0 (N900PVPUEOC5) for the Sprint Galaxy Note 3. The ROM is built from the official Samsung tar. It will self root upon flash and has init.d/busybox support. Knox has been removed completely. There are two versions of the stock deodexed ROM. The difference is one uses a normal edify recovery script and the other uses aroma installer. Both ROMS are identical otherwise. The purpose of the aroma installer is for future rom chefs to customize their rom builds using aroma installer if they so choose. This stock ROM includes all pre-installed Google & Sprint apps. Nothing has been removed or modified from stock. Also included is the OC5 kernel and modem & HLOS patch to ensure you have the latest kernel and modem with this ROM upon flash.
The ROMs are stock and will stay that way. Please don't ask for mods, changes, etc in this thread. These roms are intended for those people who want the stock ROM in it's original form with the addition of root and removal of Knox as well as other dev's/chefs who need a good solid base for their own ROM project. I give permission for other dev's to use this rom as your base and I highly recommend that you do so because it is bug-free and built from the official Samsung .tar. However, I do expect credit if you use this rom for any other project. If you appreciate my work please press that Thanks button and consider making a kind donation. using the link under my profile pic. Enjoy!
Important Note: Before flashing ANY Lollipop ROM. including this one, you MUST first have done one of the following: Taken the Lollipop ota update OR odin flashed the stock N900PVPUEOC5_N900PSPTEOC5_N900PVPUEOC5_HOME.tar. If you are still on a KK based rom (including any KK AOSP/CM based roms) then you MUST first update to Lollipop by one of the two methods I mentioned BEFORE flashing this ROM.
Flashing instructions: ***Before beginning the flash/setup process MAKE SURE your battery has at least 50% charge and/or connected to the charger!!!***
1. Backup anything you don't want to lose off your internal storage to another location.
2. Download the ROM using your pc. (downloading with your phone has a much higher risk of file corruption. Not recommended with large files).
3. VERIFY the md5!!! Once the download has finished, compare the AFH md5 using a md5 tool on your pc. (Google is your friend).
4. Put the downloaded ROM onto your internal storage or external micro sd card.
5. With phone powered off, reboot into recovery by pressing and holding volume up, power and the home button until you see the samsusung logo then release all buttons.
6. Once in recovery choose the wipe button and do a factory reset three times. Optional but recommended is to do a "Data" wipe. This will wipe all of your internal storage so MAKE SURE you backed up first like i said in step #1 above! Then go to "advanced wipe" and select all of the partitions EXCEPT micro-sd card and internal storage. Internal storage is optional but recommended on first time flashing Lollipop.
7. Choose the "Install" option and select the ROM "STOCK_DEODEXED_N900PVPUEOC5" from either your internal or external micro-sd card. It will flash the rom and give a confirmation once completed.
8. Press "Reboot" then "reboot system".
9. Initial rom setup will take several minutes and remain on the yellow Sprint Spark screen for several minutes (definately much longer than what you are used to). Let the phone setup/optimizes and the screen WILL eventually turn off once it finishes or show the setup wizard.
10. When you see the screen turn off or the setup wizard, you can begin setting up your phone for first boot.. Once finished with setup wizard wait a few moments and the phone will automatically install the sprint apps. You must either "accept" or "disagree" with each and every google prompt for these apps or else the installs pause untill you do so.. Also you will be prompted for the "connections optimizer". Quickly set it to what you want and close it. That's it! You're done!
flashing anything on your device is done at your own risk. There is no way myself or any other developer can guarantee that flashing this ROM or any other file will not brick your device or otherwise cause some other type of damage. This is just a standard warning. I am not responsible for anything that you do to your device. However I do my best to ensure all of my roms, mods, etc are 100% safe and fully tested before allowing public access.
Downloads
STOCK_DEODEXED_N900PVPUEOC5STOCK_DEODEXED_N900PVPUEOC5-AROMA
XDA:DevDB Information
STOCK_DEODEXED_N900PVPUEOC5, ROM for the Sprint Samsung Galaxy Note 3
Contributors
tx_dbs_tx, Chaz187, evilvoice, Josephigloe, SupermanTW
ROM OS Version: Lollipop
ROM Firmware Required: OC5
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2015-06-11
Created 2015-06-11
Last Updated 2015-08-02
Reserved
Reserved
Waiting for the games to begin.......
Awesome work man thanks for all you have done for us!!!!!
Thanks,
Chaz187
@tx_dbs_tx thank you for all your hard work. It is much appreciated. It was a pleasure testing. Just let me know if you need anything else.
Thank you for all your hard work and late nights...we'll done.
brilliant. our community needed this.
as promised, donation incoming for your efforts.
(sorry it cant be more, you deserve it. everyone should be aware that this dev has done us a HUGE favor.)
Code:
9XT69614RJ7600116
Thank you!!!
Awesome glad to see its up and running!! Great work to all that were involved. I wish I could of been more help
Nice work everyone.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thank you dev!
great job
Totally awesome much respect
Sent from my SM-N900P using XDA Forums Pro.
Thanks so much ....All
Thank you for your hard work and bring this to the table. Can't wait!!!! Has it been 24 hours yet? Please day yes!
Goat1378 said:
Thank you for your hard work and bring this to the table. Can't wait!!!! Has it been 24 hours yet? Please day yes!
Click to expand...
Click to collapse
Link is open already!!!
Chaz187 said:
Link is open already!!!
Click to expand...
Click to collapse
I know 39 percent downloaded! Lol
Thanks a mil. I tried cooking my own odexed version about a week ago but couldn't get it to boot past the Yellow sprint screen. Now I'm questioning if I just didn't wait long enough.
mid3vil said:
Thanks a mil. I tried cooking my own odexed version about a week ago but couldn't get it to boot past the Yellow sprint screen. Now I'm questioning if I just didn't wait long enough.
Click to expand...
Click to collapse
It was a process to get it up and running.... but we took the time to make it right!
Thanks,
Chaz187
Team Win Recovery Project 3.1.1
Snapdragon ONLY.
In NO way it is compatible with Exynos variants including but not limited to International (F/FD), Korean (N), Exynos LDU (X) variants.
Note that this does NOT unlock your phone. You need to have an unlockable variant such as Chinese or HK to flash.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
#include <std_disclaimer.h>
Special Notes:
1. DON'T FORGET TO TURN OFF REACTIVATION (Samsung Account) LOCK.
2. UNLOCK BL BEFORE FLASH.
3. KNOX will be tripped once you flashed custom binaries to your phone. (Your warranty WILL be voided.)
4. Samsung Pay, Samsung Firmware OTA (System Updates), Secure Folder and other features that require high-level security will NO LONGER once you flashed custom binaries. (You can flash custom ROMs to keep OS up to date.)
Download:
Galaxy S8 (dreamqlte - Snapdragon vaiants)
https://twrp.me/samsung/samsunggalaxys8qcom.html
Galaxy S8+ (dream2qlte - Snapdragon variants)
https://twrp.me/samsung/samsunggalaxys8plusqcom.html
Sources:
https://github.com/jesec
Changelog:
Check #2.
Guide:
Check #3.
Official Telegram Group: - General Discussion
Join to get quick support (when you find my guide confusing or meet any unexpected problem).
You can also discuss about ROMs(this group is "neutral" so you can discuss about or review any ROM. Note: Devs: Do NOT aggressively advertise your work.), get latest updates from developers or report possible bugs.
Invite Link
Show your appreciation:
Click Thanks!, Rate 5-star or/and Donate to me.
XDA:DevDB Information
TWRP for Galaxy S8 and S8+ (Snapdragon), Tool/Utility for the Samsung Galaxy S8
Contributors
jesec
Source Code: https://github.com/jesec
Version Information
Status: Stable
Created 2017-07-14
Last Updated 2018-06-20
Changelog:
July 25:
1. More additional security functions implemented by Samsung have been disabled. (those functions may lead to potential I/O issues)
2. A fatal mistake that leads to incompatibility with plus variant has been fixed.
July 15:
Initial Release
Guides:
Notice: It may wipe all your data including those in internal storage.
Pre - HOW-TO PREPARE FOR FLASH: (Chinese/HK variants)
SPECIAL NOTE: These variants do NOT have "OEM Unlock" option and you don't need to enable it. Only reactivation (Samsung Account) lock needs to be disabled.
1. On your phone, open Settings, go to "Cloud and Accounts" -> "Accounts".
2. Select your Samsung account, open menu, remove account. (That will make sure reactivation lock is disabled. Alternatively you can disable reactivation lock without delete your Samsung account. Result should be same. )
3. Download, install and run official unlock tool, CROM service.
4. Your phone is unlocked and ready to flash TWRP at this stage. Now you can proceed to part 1.
Part 1 - HOW-TO FLASH TWRP:
1. Download and Install Samsung Mobile Phones Drivers.
- Option 1: Download and Install Smart Switch for PC.
- Option 2: Download and Install standalone driver package.
2. Download and extract Odin (Samsung's Flash Tool) to your computer.
3. Download a .tar image of TWRP.
4. Reboot your device to download mode.
- Hold [VOLUME DOWN] + [BIXBY] + [POWER] for approx. 15 seconds.
- Read the warning carefully.
- If you agree, press [VOLUME UP] to get into Download mode. If you don't agree, STOP.
5. Open Odin and place that TWRP tar file in the [AP] slot.
6. Connect your phone.
7. Hold [VOLUME UP] + [BIXBY] + [POWER] on your phone and then press start on Odin.
8. Wait for the phone to reboot. DO NOT release [VOLUME UP] + [BIXBY] + [POWER] or you may not reboot into TWRP.
Part 2 - HOW-TO INITIALIZE TWRP: (for new phones)
1. If you completed Part 1 successfully, you should be in TWRP now. At this point, you will reach the screen asking you if you want to allow system modifications.
2. Select "Keep /system RO". (Don't swipe right or you may not be able to boot into system if you failed to complete next steps. However, you can swipe right to allow modifications if you are confident that you can complete next steps.)
3. Go to "Wipe" menu of TWRP and you will find "Format Data". Press "Format Data" and type "yes" to continue.
4. Go to "Reboot" menu and Press "Recovery" to reboot TWRP.
AT THIS STEP YOU CAN DIRECTLY GO TO PART 3 OF THIS GUIDE IF YOU WANT TO ROOT.
5. Download the latest dm-verity and force encryption disabler zip on your computer.
6. Transfer the zip to your phone.
- Option 1: MTP: Connect your phone with computer and just copy the zip to internal storage. (similar to how you transfer files when in system.)
- Option 2: ADB: Connect your phone with computer and run command "adb push /path/to/zip /sdcard/".
- Option 3: External SD: Copy the zip to an external SD and then insert the card to your phone.
7. Go to "Install" menu of TWRP and flash the zip.
TWRP is initialized and fully functional at this stage. Now you can either reboot into system or root, flash custom ROMs, Kernels via TWRP.
Part 3 - HOW-TO ROOT:
Note: Additional security layers implemented by Samsung make it impossible to get root access with a modified stock kernel. Thus, a custom kernel with security features disabled is MANDATORY.
1. Download a custom kernel with security features disabled.
- Reference: https://forum.xda-developers.com/galaxy-s8/samsung-galaxy-s8--s8-cross-device-development/kernel-jesse-s-kernel-galaxy-s8-s8-t3637640
1. Download the root package.
- Option 1: Magisk
- Option 2: SuperSU (untested)
2. Transfer the zips to your phone.
3. Flash the kernel.
4. Flash the root package.
how does this even work?
unitz0mbie said:
how does this even work?
Click to expand...
Click to collapse
You never heard about Jesec, the mighty one?
diazepambr said:
You never heard about Jesec, the mighty one?
Click to expand...
Click to collapse
i have seen the name before but never realized the power of a God among earth
Jesse is like the Matrix he only see's code format :laugh:
Amazing work!
Is this legitimate?
Anyone tried flashing it yet? Will it work without an unlocked bootloader?
I thought bootloader was locked?
Sent from my SM-G955U using Tapatalk
GHolbrook4 said:
Anyone tried flashing it yet? Will it work without an unlocked bootloader?
Click to expand...
Click to collapse
Prob not, I figured I would try anyway just to be 100% Certain does not flash through Odin and Fastboot OFC Doesnt ever connect to device since locked bootloader... Pretty sure it was uploaded for once the SD Version has Bootloader access
---------- Post added at 06:04 PM ---------- Previous post was at 06:03 PM ----------
lilrich17892 said:
I thought bootloader was locked?
Sent from my SM-G955U using Tapatalk
Click to expand...
Click to collapse
It is
It's for the version with snapdragon and boot loader unlocked, i.e. China.
NeedleGames said:
It's for the version with snapdragon and boot loader unlocked, i.e. China.
Click to expand...
Click to collapse
China has SD?!?! Thought it was Exynos
GHolbrook4 said:
Anyone tried flashing it yet? Will it work without an unlocked bootloader?
Click to expand...
Click to collapse
Nope. SW REV CHECK FAIL : [recovery] Fused 1 > Binary 0 is the error on locked Bootloader
Does audio mods work for you guys?
Does this mean that it works with S8s on T-Mobile?
explorer-10 said:
Does this mean that it works with S8s on T-Mobile?
Click to expand...
Click to collapse
No, only for the Chinese Snapdragon phones. You can't root a s8 in the US because no one s figured out how to unlock the bootloader yet.
GHolbrook4 said:
No, only for the Chinese Snapdragon phones. You can't root a s8 in the US because no one s figured out how to unlock the bootloader yet.
Click to expand...
Click to collapse
well, damn. i wish it would say that in the headline on my Google feed instead of getting my hopes up. its like almost getting me there and then stopping right before i can finish on her face
NeedleGames said:
It's for the version with snapdragon and boot loader unlocked, i.e. China.
Click to expand...
Click to collapse
Also lock in China.
Team Win Recovery Project 3.1.1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Exynos ONLY.
In NO way it is compatible with Snapdragon variants including but not limited to American(U/A/T/P/V), Chinese(0/8/6), Hong Kong(0), Japanese(SC-*), Canadian(W) variants.
Special Notes:
1. DON'T FORGET TO ENABLE "OEM UNLOCK" (located in Developers options).
2. KNOX will be tripped once you flashed custom binaries to your phone.
(Your warranty may be voided. However this may not affect you if your country forces Samsung to provide hardware warranty regardless of software status.)
3. Samsung Firmware OTA (aka System Updates) will no longer work once you flashed custom binaries.
(You can flash custom ROMs if you want to keep the OS up-to-date.)
Download: greatlte (Exynos variants - N950F/FD/X/N)
https://drive.google.com/file/d/0B7EuVd0yZ8ErSE5EQW12TVEtcVk/view?usp=sharing
Sources:
https://github.com/TeamWin
https://github.com/geiti94/android_device_samsung_greatlte
https://github.com/geiti94/android_kernel_samsung_universal8895_greatlte
Changelog:
Check #2.
Guide:
Check #3.
Bugs:
-A mouse pointer shows on display
XDA:DevDB Information
[RECOVERY]TWRP for Galaxy Note 8 (Exynos), Kernel for the Samsung Galaxy Note 8
Contributors
geiti94, @jesec for the S8+ TWRP tree i used as base
Kernel Special Features:
Version Information
Status: Beta
Created 2017-09-16
Last Updated 2017-09-21
Changelog:
Sep.21
Removed Mouse cursor. thx alot to @Tkkg1994 that joined now us too on n8
Added F2FS Support
Sep.17
Fixed MTP
Fixed ADB
Sep. 16:
Initial Release
Guides:
Notice: It may wipe all your data including those in internal storage.
Part 1 - HOW-TO FLASH TWRP:
1. In your ROM, go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
2. Go to Settings -> Developer options and enable OEM Unlock option.
3. Download and Install Samsung Mobile Phones Drivers.
- Option 1: Download and Install Smart Switch for PC.
- Option 2: Download and Install standalone driver package.
4. Download and extract Odin (Samsung's Flash Tool) to your computer.
5. Download a .tar image of TWRP.
6. Reboot your device to download mode.
- Hold [VOLUME DOWN] + [BIXBY] + [POWER] for approx. 15 seconds.
- Read the warning carefully.
- If you agree, press [VOLUME UP] to get into Download mode. If you don't agree, STOP.
7. Open Odin and place that TWRP tar file in the [AP] slot.
8. Connect your phone.
9. Hold [VOLUME UP] + [BIXBY] + [POWER] on your phone and then press start on Odin.
10. Wait for the phone to reboot. DO NOT release [VOLUME UP] + [BIXBY] + [POWER] or you may not reboot into TWRP.
Part 2 - HOW-TO INITIALIZE TWRP: (for new phones)
1. If you completed Part 1 successfully, you should be in TWRP now. At this point, you will reach the screen asking you if you want to allow system modifications.
2. Select "Keep /system RO". (Don't swipe right or you may not be able to boot into system if you failed to complete next steps. However, you can swipe right to allow modifications if you are confident that you can complete next steps.)
3. Go to "Wipe" menu of TWRP and you will find "Format Data". Press "Format Data" and type "yes" to continue.
4. Go to "Reboot" menu and Press "Recovery" to reboot TWRP.
5. Download the latest dm-verity and force encryption disabler zip on your computer.
6. Transfer the zip to your phone.
- Option 1: MTP: Connect your phone with computer and just copy the zip to internal storage. (similar to how you transfer files when in system.) (for the moment not working)
- Option 2: ADB: Connect your phone with computer and run command "adb push /path/to/zip /sdcard/". (for the moment not working)
- Option 3: External SD: Copy the zip to an external SD and then insert the card to your phone.
7. Go to "Install" menu of TWRP and flash the zip.
TWRP is initialized and fully functional at this stage. Now you can either reboot into system or root, flash custom ROMs via TWRP.
Part 3 - HOW-TO ROOT:
1. Download the flashable zip.
- Option 1: Magisk
- Option 2: SuperSU (untested)
2. Transfer the zip to your phone.
3. Go to "Install" menu of TWRP and flash the zip.
Part 3a - HOW-TO FLASH CUSTOM ROMS:
1. Download the flashable zip.
2. Transfer the zip to your phone.
3. Go to "Install" menu of TWRP and flash the zip.
Simple.
Omg I'm gonna die happy lol. Let me go and root now.
Sent from my SM-N950N using XDA-Developers Legacy app
Good work keep it up
This is great. Many thanks
Great job and many thanks for your efforts!
Do I get this right?
When I'm in download mode, I have to hold the 3 buttons again and press start in odin ?
Doesn't that interrupt the flash process ?
Pinu'u said:
Do I get this right?
When I'm in download mode, I have to hold the 3 buttons again and press start in odin ?
Doesn't that interrupt the flash process ?
Click to expand...
Click to collapse
No go To Download Mode in The smartphone and Then .via Odin Select AP and The Recovery IMG Then Flash ans Phone Reboot automaticly
Oh yeah baby
Thanks time to de bloats and install my favorite apps
Sent from my SM-N950N using XDA-Developers Legacy app
Thanks a lot TWRP up and rocking. Great work !!
Edit : Can confirm that SuperSU v2.82 is working also !!
Anybody know if this will also work with N950F/DS model? Thanks.
xpdragon said:
Anybody know if this will also work with N950F/DS model? Thanks.
Click to expand...
Click to collapse
Works since i have it byself is the dual sim one right? when yes is same modell as mine
Mine don't have oem unlock options in developers mode. Need to wait for sw update or other opinion. ??
Sent from my SM-N950F using Tapatalk
geiti94 said:
Works since i have it byself is the dual sim one right? when yes is same modell as mine
Click to expand...
Click to collapse
Yes, it is dual sim model. Thanks for the reply.
your fantastic!!! one day without root and twrp!! im so happy now ^^. now i can continue with modding on my new great phone.
Finish work and lets go home flashing
Was just about to port it by myself and then I saw Your thread . Great Job Geiti! Guess I will take care of building AOSP for N950F then .
pswin09 said:
Mine don't have oem unlock options in developers mode. Need to wait for sw update or other opinion.
Sent from my SM-N950F using Tapatalk
Click to expand...
Click to collapse
There's no guarantee a software update will ever unlock your bootloader if the OEM Unlock option is not available for you. I would suggest selling it and buying a new one that does have the option. If you really want to root or install custom ROMs, why take the risk when you spent $1000 on this phone for a specific purpose?
If you just bought your phone, it must still be brand new and in pristine condition. You should sell it for almost full price. The demand is really high right now so you'll have no problems selling it fast.
pswin09 said:
Mine don't have oem unlock options in developers mode. Need to wait for sw update or other opinion.
Sent from my SM-N950F using Tapatalk
Click to expand...
Click to collapse
can be your carrier blocked the oem unlock. download a debranded firmware like the one with AUT or DBT csc and flash it with odin and look if you have then the menu. But flash it only when you have a N950F or a N950F/DS
Has anyone tested Android Pay after doing this?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
**Welcome to the Fox Den!**
This is a stockish, pre-rooted ROM based from N950U1 3BRA5 Firmware,
Before you proceed, I cannot be held liable for the damage or malfunction of your device using these files,
you proceed at your own risk and remove my liability by continuing to any portion of this thread!
!PLEASE BE SURE TO READ ALL THE INSTRUCTIONS THOROUGHLY AND SEARCH THE POSTS BEFORE ASKING QUESTIONS!
Prerequisites:
- Your Note 8 and PC ready to flash
- READ THE ENTIRE GUIDE!
- Download and extract all required files to convenient location, keeping all files organized, on PC
- Rooted your device with SamFAIL or be on another custom ROM, FlashFire installed, and Busy-Box!Steps:Step 1 - Ensure Busybox is installed to /system/xbin.
Step 2 - Ensure that SuperSu is updated.
Step 3 - Install FlashFire, Open FlashFire and grant it permission.
Step 4 – Select the RED + button on the bottom right of FlashFire.
Step 5 – Select "Flash ZIP or OTA" button.
Step 6 – Navigate to location of Fennec ROM and select it.
Step 7 – Check the box next to (Mount /system read/write) then select the check mark in top right corner.
Step 8 – Select "Wipe" button.
Step 9 – Ensure System data, 3rd party apps, Dalvik cache, and Cache partition boxes are selected then select the check mark in top right corner. Optionally, you can select Internal storage.
*Note* – If you are coming from my ROM, no Wipe is needed, unless directed by update.*Step 10 – Long press Wipe section and position it 1st before ZIP flash.
Step 11 – Leave Reboot section set to Normal unless you plan on flashing FR Odin files, then select Download and the check mark at top right.
Step 12 – Select the Flash section at the bottom of FlashFire. Boot will take a while so relax for a while.
Features:
SuperSu
Busybox (Binary only no app)
Deodexed
Zipaligned
DeKnoxed
Dex
Download Booster
VoLTE, ScreenCapture, TouchSensitivity, UHQ Quick Panel Toggles
VoLTE Settings Menu
Wi-Fi Calling Phone Settings Menu
Call Recording
VVM button w/Badge (may not work for all carriers, let me know)
Messages - Save/Restore to SD
Messages - Set as Ringtone
Messages - Many others
HotSpot - added apn "dun" as fixed (does not work for all carriers, use shortcut master lite to add)
HotSpot - SSID changed to Galaxy Note8 Net "4digits" for all carriers
Performance tweaks
More coming soon...
Not Working
Some Carrier Features (Due to it being stock U1)
You tell me!
Mods Post 2
Changelog Post 3...
Downloads:
ROM
Fennec ROM_V1.0 - (Full Wipe suggested)
BlueFox_U1-BQL2_VBeta4.zip
Odin Files
*These Odin files are based off N950U1 Bootlader for best performance with U1 ROM*
- Flash with Prince Comsy's Odin -
For V2/V2.5 Root
FR_U1-2BQL2_CMBO-2AQL1 .... (These replace BlueFox_U1_AQL1-OdinFiles_BQL9Moddem)
FR_Optional U-2BQL Carrier Modems ... (Can be used instead of CP_U1-2BQL2 Modem depending on carrier)
For V3 Root
FR_U1-3BRA5_CMBO-3ARA3 .... (These replace BlueFox_U1-3ARA3-OdinFiles_3BRA9Modem)
FR_Optional U-3BRA Carrier Modems ... (Can be used instead of CP_U1-3BRA5 Modem depending on carrier)
For those on V3 Bootloader, not rooted
The official SamFAIL V3 has been updated..., unless you really want these.
1.Flash V3 Bootloader Odin files, FR_U1-3BRA5_CMBO-3ARA3 In Prince Comsy's Odin,(yes it had a security error).
2. Boot to Download mode.
3. Flash the SamFAIL V3 System file according to SamFail Part 1 Instructions Here (normal error and upload screen).
4. Boot to Download mode.
5. Flash V3 Bootloader Odin files again, FR_U1-3BRA5_CMBO-3ARA3
6. Device should reboot. Relax, boot takes a few.
*If you get a bootloop on SamFAIL startup, flash carrier CSC in Odin. 3BRA9 CSC*
7. Skip setup and install FlashFire
8. Flash BlueFox ROM following instructions above.
Thanks and Credits:
@me2151 - SamFAIL for Galaxy Note8
@partcyborg - Finding root for Galaxy Note8
@Chainfire - SuperSU & FlashFire
@OptimuSlime - Testing BlueFox ROMs
@Team DevDigitel - ROM Tips
@jrkruse - VoLTE icon fix
- More coming soon (as before)
Other Links
*Culpeo ROM*
*SM-N950U1 XAA Stock Recovery Guide*
*Carrier Flashing and Switching Guide*
*Edit APN Settings & Native HotSpot Guide*
*SM-N950U/U1 Factory Binary, Combination Firmware*
*S Note & Working Action Memo*
*Free SIM Unlock Service by: @instrumentaly*
XDA:DevDB Information
Fennec ROM, ROM for the Samsung Galaxy Note 8 (2017 Phone)
Contributors
BlueFox721
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Current Stable Version: V1.0
Stable Release Date: 2018-03-25
Created 2018-02-13
Last Updated 2018-06-12
Mods and Updates:
*Instructions for flashing MODs in FlashFire*
Select Red "+" circle at bottom right.
Select Flash Zip or OTA.
Select MOD to flash.
Check Mount /system read/write
Select Flash and Profit!
Boot Animations:
Star Trek 2009 Intro with Enterprise_Sound
(Preview Coming)
Tron GENII LightCycle_Sound - Coming Soon
(Preview Coming Soon)
Black Hole revised for Note8
Original by @motomotomotoG
(Preview Coming)
Stock Samsung Boot Animation
Stock Carrier Boot Animations (All)
More Coming soon to a Den near you....
Changelog:
2018-04-14 - BootAnimation Update
Updated current BootAnimations to be compatible with Carrier based ROMs
Added Stock Carrier BootAnimations (All in One Flash)
2018-03-25 - Fennec ROM V1.0:
Rebased off U1 3BRA5
Rebuilt OMC & CSC directories for all carriers
Enabled VoLTE, VoWiFi, Wi-Fi Calling, Video Calling, RCSchat for all carriers (although enabled, may not be available from carrier)
Added many features to Messages for all carriers
Added shutter sound menu, camera during call, select record mode to camera
Added call recording menu, VVM & Badge to phone
Added Visual Voice Mail apps for some carriers (let me know if they work)
VoLTE icon Fix by jrkruse
Added Settings info for ROM
Minor debloat
Updated Gapps
Minor Performance Tweaks
2018-03-03 - Odin Files:
Added Boot Animations to MODs
2018-02-23 - Odin Files:
Updated Odin files for FennecROM
2018-02-16 - Odin Files:
Fix Security Features
2018-02-14 - Odin Files for 3BRA Users:
Uploaded Odin Files for 3BRA Users
2018-02-09 - BlueFox_U1-BQL2_VBeta4:
Initial Release
Added files for carrier config on startup
More CSC edits for carrier features
2018-02-07 - BlueFox_U1-BQL2_VBeta3:
Updated ROM installation information
Edited Sales Code to see if carrier activation begins at startup
Edited CSC information for some carrier features
2018-02-04 - BlueFox_U1-BQL2_VBeta2:
Updated Updater Script to root properly
Deodexed ROM
Zipaligned ROM
2018-02-01 - BlueFox_U1-BQL2_VBeta1:
Initial Build - SM-N950U1 BQL2
AQK3 Bootloader Files
Root Files Added
BusyBox Added
Up
very exciting!
So this is for the 9500 ul not u
pbedard said:
So this is for the 9500 ul not u
Click to expand...
Click to collapse
[N950U/U1/W]
What bootloader
@BlueFox721 Great work!
pbedard said:
What bootloader
Click to expand...
Click to collapse
I have linked a flashable Odin file that contains AQL1 Bootloader and BQL9 (U) Modem and one that contains AQK3 and BQL2 (U1)...choose to flash or not....The boot.img is AQL1....
Sorry for questions
pbedard said:
Sorry for questions
Click to expand...
Click to collapse
You are fine, I had not yet put the info up yet...still editing...lol
Can anyone else please verify that you can use the screen @ 180 degrees ... I asked BF and he wasnt sure about it but on my phone I'm able to use it upside down. Just curious if anyone else is already using this rom and can try.
Rom booted Hella fast
Can't wait to get home and try this!
Just to be clear ... this will or won't work if I'm on a device that has been updated to v3 bootloader , but is then rooted by the newly available root method?
Edit
The reason I ask is that I tried to flash but got into trouble I think because I tried to flash the attached Odin modem files (I'm currently on U3RA1 baseband), but rooted after upgrading to Oreo
jcrompton said:
Just to be clear ... this will or won't work if I'm on a device that has been updated to v3 bootloader , but is then rooted by the newly available root method?
Edit
The reason I ask is that I tried to flash but got into trouble I think because I tried to flash the attached Odin modem files (I'm currently on U3RA1 baseband), but rooted after upgrading to Oreo
Click to expand...
Click to collapse
You can flash just remove the boot.img by opening zip with winrar and deleting the boot.img...it will take a little time to delete...Then flash the zip...
If you already flashed it and get an error on boot, force download mode and flash your Odin files for 3BRA9
Should boot fine then
BlueFox721 said:
You can flash just remove the boot.img by opening zip with winrar and deleting the boot.img...it will take a little time to delete...Then flash the zip...
If you already flashed it and get an error on boot, force download mode and flash your Odin files for 3BRA9
Should boot fine then
Click to expand...
Click to collapse
But trying to flash the modem you listed won't work correct?
If we are on boatloader v3 can we use a modem from U1?
When you say to flash the 3BRA9 files are you talking about just returning to stock in the case of being unable to boot?
jcrompton said:
But trying to flash the modem you listed won't work correct?
If we are on boatloader v3 can we use a modem from U1?
When you say to flash the 3BRA9 files are you talking about just returning to stock in the case of being unable to boot?
Click to expand...
Click to collapse
New files for SamFAIL will have Odin files for V3 bootloader...
If you can't wait I can get you V3 flashable files for use with my rom...
BlueFox721 said:
New files for SamFAIL will have Odin files for V3 bootloader...
If you can't wait I can get you V3 flashable files for use with my rom...
Click to expand...
Click to collapse
No problem to wait .... But on the other hand would love to try your work
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
**Welcome to the Fox Den!**
Chimera is a custom, pre-rooted ROM based from N950U 3BRA9 Firmware that has many MODs built in.
Before you proceed, I cannot be held liable for the damage or malfunction of your device using these files,
you proceed at your own risk and remove my liability by continuing to any portion of this thread!
!PLEASE BE SURE TO READ ALL THE INSTRUCTIONS THOROUGHLY AND SEARCH THE POSTS BEFORE ASKING QUESTIONS!
Prerequisites:
- Your Note 8 and PC ready to flash
- READ THE ENTIRE GUIDE!
- Download and extract all required files to convenient location, keeping all files organized, on PC
- Rooted your device with SamFAIL or be on another custom ROM
- FlashFire or Safestrap installed
- Ensure you are on the proper CSC code for your carrier using "Phone Info app available in PlayStore...
**If you are on XAA some network features may not work unless you change**Instructions:
Safestrap Method (Preferred):
Step 1 - Ensure Busybox is installed to /system/xbin.
Step 2 – Ensure that SuperSu is updated.
Step 3 – Install Safestrap, Open Safestrap and grant it permission. (If not already Installed)
Step 4 – Select Install Recovery.
Step 5 – Select Reboot to Recovery.
Step 6 – Select Wipe button.
Step 7 – Swipe to Factory Reset (Do Three times).
Alternatively, Select Advanced Wipe to choose, Dalvik, Cache, System, and Data. (Do Three Times)Step 8 – Select Back Triangle Button to back out to Main menu.
Step 9 – Select Install button.
Step 10 – Navigate to location of downloaded Chimera ROM and select it.
Optional, Check the Reboot after installation box.Step 11 – Swipe to confirm Flash.
Step 12 – Select Reboot System button after install complete.
Step 13 – Boot will take a while so relax for a while.
FlashFire Method:
Step 1 - Ensure Busybox is installed to /system/xbin.
Step 2 – Ensure that SuperSu is updated.
Step 3 – Install FlashFire, Open FlashFire and grant it permission. (If not already Installed)
Step 4 – Select the RED + button on the bottom right of FlashFire.
Step 5 – Select "Flash ZIP or OTA" button.
Step 6 – Navigate to location of downloaded Chimera ROM and select it.
Step 7 – Check the box next to (Mount /system read/write) then select the check mark in top right corner.
Step 8 – Select "Wipe" button. (Full Wipe is Neccessary unless Directed Otherwise)
Step 9 – Ensure System data, 3rd party apps, Dalvik cache, and Cache partition boxes are selected then select the check mark in top right corner. Optionally, you can select Internal storage.
Step 10 – Long press Wipe section and position it 1st before ZIP flash.
Step 11 – Leave Reboot section set to Normal unless you plan on flashing BlueFox Odin files, then select Download and the check mark at top right.
Step 12 – Select the Flash section at the bottom of FlashFire. Boot will take a while so relax for a while.
Chimera's Features:
SuperSu
Busybox (just binary)
Deodexed
Zipaligned
DeKnoxed
Safestrap Integration
ROM Control
VoLTE icon Fix
Download Booster (Unless you flash Carrier CSC)
Native Tethering
CallerID
Many Custom settings in ROM Control (description of TWIZtd Mods coming soon)
More coming soon...
*Will Debloat later - For now remove unwanted apps with Titanium Backup or a root explorer*
What's Not Working:
Rotation Lock - *Fix - Set toggle and reboot*
360 Rotation
DEX (Swap SystemUI with Culpeo or SamFAIL SystemUI)
Cannot Access Data error message
You tell us....
Changelog coming soon...
Mods coming soon...
Downloads:
The ROM:
Ultimate Chimera V1.5
Odin Files:
*These Odin files are based off N950U Bootlader for best performance with U ROM*
- Flash with Prince Comsy's Odin -
For V3 Root
CR_U-3BRA9_CMBO-3ARA3
Optional U-3BRA Carrier Modems
For V2/V2.5 Root
CR_U-2BQL9_CMBO-2AQL1
Optional U-2BQL Carrier Modems
For V1 Root
CR_U-1AQI9_CMBO-1AQI6
Optional_U-1AQI_CarrierModems
For those on V3 Bootloader, Not yet rooted:
The official SamFAIL V3 has been updated...Please use instead, unless you really want these.
Step 1 - Flash V3 Bootloader Odin files, CR_U-3BRA9_CMBO-3ARA3 In Prince Comsy's Odin,(yes it had a security error).
Step 2 - Boot to Download mode.
Step 3 - Flash the SamFAIL V3 System file according to SamFail Part 1 Instructions Here (normal error and upload screen).
Step 4 - Boot to Download mode.
Step 5 - Flash V3 Bootloader Odin files again, CR_U-3BRA9_CMBO-3ARA3
Step 6 - Device should reboot. Relax, boot takes a few.
*If you get a bootloop on SamFAIL startup, flash carrier CSC in Odin. 3BRA9 CSC*
Step 7 - Skip setup and install FlashFire or Safestrap.
Step 8 - Flash Chimera ROM following instructions above.
Thanks and Credits:
@JavixKGD - Many great TWIZtd MODs
@me2151 - SamFAIL for Galaxy Note8
@partcyborg - Finding root for Galaxy Note8
@Chainfire - SuperSU & FlashFire
@jrkruse - VoLTE icon fix
@afaneh92 - Safestrap Recovery
@josete_197601 - GRX TouchWiz Mod
Testers coming soon....sorry other mentions are coming...
- More coming soon (as before)
Other Noteworthy Thanks:
@daxgirl for all the great guides on the many great mods!!!
@tdunham for the massive library of mods he has on his thread here and to every dev that put their time into the guides that are there. You are just too many to mention my friends.
@asc1977 for his great work on the growing library of guides and mods for MM here.
@mrRobinson for adaway.
@A.R.I.S.E. Sound Systems Sound Systems for the great sound mod of Viper4ARISE and Dolby ATMOS.
@ahrion for his amazing work with great sound mods for Android, specifically Dolby ATMOS Collective found here.
Other mentions can be found on the TWIZtd Mod thread in the links below!
If I have forgotten anyone else, please do PM me and I will add you quickly; because credit is given where it is due!!!
MANY THANKS TO ALL, HOPE YOU ENJOY CHIMERA ROM!!!!!!
Other Links:
*SamFAIL by me2151*
*TWIZtd by JavixKGD*
*Culpeo ROM*
*Fennec ROM*
*SM-N950U1 XAA Stock Recovery Guide*
*Carrier Flashing and Switching Guide*
*Edit APN Settings & Native HotSpot Guide*
*SM-N950U/U1 Factory Binary, Combination Firmware*
*S Note & Working Action Memo*
*Free SIM Unlock Service by: @instrumentaly*
XDA:DevDB Information
Chimera ROM, ROM for the Samsung Galaxy Note 8 (2017 Phone)
Contributors
BlueFox721, JavixKGD
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Current Stable Version: V1.5
Stable Release Date: 2019-10-05
Created 2018-05-25
Last Updated 2019-11-14
Mods and Extras:
*Instructions for flashing MODs inSafestrap:*
Select Recovery on Boot.
Select Wipe.
Select Advanced Wipe.
Check Dalvik / ART Cache and Cache.
Swipe to Wipe.
Back out to Main Recovery Menu.
Select Install.
Choose Mod to Install.
Swipe to confirm flash.
Select Reboot System and Profit!
*Instructions for flashing MODs inFlashFire:*
Select Red "+" circle at bottom right.
Select Flash Zip or OTA.
Select MOD to flash.
Check Mount /system read/write
Select Flash and Profit!
Stock Apps:
Optional_StockKeyboard_2.1.03.23
Optional_StockMessages_4.3.03.20
Boot Animations:
Star Trek 2009 Intro with Enterprise_Sound
(Preview Coming)
Tron GENII LightCycle_Sound - Coming Soon
(Preview Coming Soon)
Black Hole revised for Note8
Original by @motomotomotoG
(Preview Coming)
Stock Samsung Boot Animation
Stock Carrier Boot Animations (All)
More Coming soon to a Den near you....
Changelog:
Changelog being updated.................
Reserved
..
Fantastic! Thank you Bluefox, can't wait to try it this weekend ?
@BlueFox721 does this one have the SecSettings2 fix for fingerprint?
Jammol said:
@BlueFox721 does this one have the SecSettings2 fix for fingerprint?
Click to expand...
Click to collapse
Yes
BlueFox721 said:
Yes
Click to expand...
Click to collapse
Cool business man. Have you been able to look into the location issue I reported in PM? I'm about to download this version to see what happens.
Jammol said:
Cool business man. Have you been able to look into the location issue I reported in PM? I'm about to download this version to see what happens.
Click to expand...
Click to collapse
If you don't mind, could you tell me what location issue you are experiencing?
Jammol said:
Cool business man. Have you been able to look into the location issue I reported in PM? I'm about to download this version to see what happens.
Click to expand...
Click to collapse
Location seems to be working fine as well as wifi auto connect...After 5 houses I had to manually turn off the Wi-Fi because it was still registering...
As soon as I got 4 houses close, auto connect connected and speeds were good...at least my neighbors can get my internet...(just kidding, password protected...lol)
BlueFox721 said:
Location seems to be working fine as well as wifi auto connect...After 5 houses I had to manually turn off the Wi-Fi because it was still registering...
As soon as I got 4 houses close, auto connect connected and speeds were good...at least my neighbors can get my internet...(just kidding, password protected...lol)
Click to expand...
Click to collapse
Thanks BlueFox721!
IT'S HERE!!!
The mighty Wizards have outdone themselves. Great job guys.
SM-N950U CHIMERA V1
---------- Post added at 05:39 AM ---------- Previous post was at 05:36 AM ----------
Location working fine here and wifi auto connects
SM-N950U CHIMERA V1
butchieboy said:
The mighty Wizards have outdone themselves. Great job guys.
SM-N950U CHIMERA V1
---------- Post added at 05:39 AM ---------- Previous post was at 05:36 AM ----------
Location working fine here and wifi auto connects
SM-N950U CHIMERA V1
Click to expand...
Click to collapse
Android.Ninja said:
If you don't mind, could you tell me what location issue you are experiencing?
Click to expand...
Click to collapse
BlueFox721 said:
Location seems to be working fine as well as wifi auto connect...After 5 houses I had to manually turn off the Wi-Fi because it was still registering...
As soon as I got 4 houses close, auto connect connected and speeds were good...at least my neighbors can get my internet...(just kidding, password protected...lol)
Click to expand...
Click to collapse
So I've tracked down all of my issues to being our work WiFi sucks really bad. As for location, don't know why but starting all the way over did the trick. As went all the way back to stock and then root, and then flash. Ugh, that was annoying. Working great now though, located me in less than 36ms!!! :good:
To all those involved with building this Rom, thank you very much, and congratulations on a great job. It is running smooth as my bear belly(kidding, abs man here!). :laugh::good:
Couldn't help but smile when i saw the boot loader animation. This is awesome! Thank you for all the hard work!
Sud0Bash said:
Couldn't help but smile when i saw the boot loader animation. This is awesome! Thank you for all the hard work!
Click to expand...
Click to collapse
I thought people might like it...?
The modem on 3BRA for TMB keep saying failed when I tried to flash it through Cosmey
dallen5 said:
The modem on 3BRA for TMB keep saying failed when I tried to flash it through Cosmey
Click to expand...
Click to collapse
You may need to flash it all together,
BL, AP, and CP (being the TMB Modem) so that matching occurs
i have safestrap so i just clean wipe and install? no need to re-root or anything right? and does it already have twz features n then some?
mister_propa said:
i have safestrap so i just clean wipe and install? no need to re-root or anything right? and does it already have twz features n then some?
Click to expand...
Click to collapse
Yes, full wiipe in Safestrap,
Safestrap will remain (Integrated),
No need to root as it is included,
Many Features.....