Related
Hi! I was trying to root Nokia 1
I flash TWRP through fastboot and it worked! But the problem was I was unable to see my files there.I think because of encryption..
So, I accidentally factory reset my phone through TWRP and then, I was unable to boot into system again..
I was stuck in TWRP
So, I go to fastboot and flash stock_recovery.IMG and after that when I reboot. I am seeing a black screen. I can feel vibration when press home key or home + volume up/down. but screen is black
Please help...
abdul_manan said:
Hi! I was trying to root Nokia 1
I flash TWRP through fastboot and it worked! But the problem was I was unable to see my files there.I think because of encryption..
So, I accidentally factory reset my phone through TWRP and then, I was unable to boot into system again..
I was stuck in TWRP
So, I go to fastboot and flash stock_recovery.IMG and after that when I reboot. I am seeing a black screen. I can feel vibration when press home key or home + volume up/down. but screen is black
Please help...
Click to expand...
Click to collapse
Use micro SD card for twrp. You can't remove encryption just by factory reset. I know how to remove encryption on Nougat but that method doesn't work on Oreo. When you flashed TWRP flash SuperSU (not Magisk) then boot to system, after that boot to twrp recovery again and wipe factory reset and wipe internal storage. You have removed encryption. SuperSU needs to be updated to patch plat and non play file contexts to remove encryption on Oreo. Or someone can make flashable zip to remove encryption.
First find nb0 file for Nokia 1 and try to flash rom with OST.
SkaboXD said:
Use micro SD card for twrp. You can't remove encryption just by factory reset. I know how to remove encryption on Nougat but that method doesn't work on Oreo. When you flashed TWRP flash SuperSU (not Magisk) then boot to system, after that boot to twrp recovery again and wipe factory reset and wipe internal storage. You have removed encryption. SuperSU needs to be updated to patch plat and non play file contexts to remove encryption on Oreo. Or someone can make flashable zip to remove encryption.
First find nb0 file for Nokia 1 and try to flash rom with OST.
Click to expand...
Click to collapse
Thanks for the reply!
Can you please tell me where can I find the nb0 file of Nokia 1 with Android 8.1 Oreo Go edition TA-1047?
abdul_manan said:
Thanks for the reply!
Can you please tell me where can I find the nb0 file of Nokia 1 with Android 8.1 Oreo Go edition TA-1047?
Click to expand...
Click to collapse
currently it's not available, you need to wait someone to upload it.
Nokia1 uses MTK CPU right? If you can get the ota zip of the current update on your phone, you can extract the boot.img file then boot into download mode and type fast boot flash boot <boot.img file>
redweaver said:
Nokia1 uses MTK CPU right? If you can get the ota zip of the current update on your phone, you can extract the boot.img file then boot into download mode and type fast boot flash boot <boot.img file>
Click to expand...
Click to collapse
Can you please explain a little bit more!
How to get ota zip file? (My phone is not working as mentioned above)
Where can I get boot.img?
How to extract and where boot.img?
How to boot into download mode?
abdul_manan said:
Hi! I was trying to root Nokia 1
I flash TWRP through fastboot and it worked! But the problem was I was unable to see my files there.I think because of encryption..
So, I accidentally factory reset my phone through TWRP and then, I was unable to boot into system again..
I was stuck in TWRP
So, I go to fastboot and flash stock_recovery.IMG and after that when I reboot. I am seeing a black screen. I can feel vibration when press home key or home + volume up/down. but screen is black
Please help...
Click to expand...
Click to collapse
I'm having a kind of similar issue. I flashed twrp and now its stuck in a twrp loop. It boots only in twrp and not system. What should I do?
Ludba Amb said:
Can you please explain a little bit more!
How to get ota zip file? (My phone is not working as mentioned above)
Where can I get boot.img?
How to extract and where boot.img?
How to boot into download mode?
Click to expand...
Click to collapse
http://www.mediafire.com/file/0xgn9o0b711wcw0/Nokia_1_TA-1047_MT6735_V8.1.0_180401.zip
Stock Rom for 1047
Download it.
Extract boot.img from that
boot into download mode/recovery
adb reboot recovery
answers to all your questions.... not the answer to fix your problem I think... But have a go.
And last but not least... Please use the search option first or google instead of asking all questions at once.
Or try to get familiar with rooting first...…
good luck buddy.
hello everyone i have nokia 1 oreo go edition i don't have any idea how to root
please help me by sending links for :
1 ) nokia 1 (ta-1047 ) TWRP
2 ) nokia 1 custom rom
3 ) nokia 1 current rom (for security)
(remenber thats only model ta-1047)
seriously i want to root it because there are many issues like multitouch screen problem or missing some system apps and also device getting hot because the memory (ram) is lagging (1gb ram is not enough to run android oreo correctly 2018 )
{PLEASE HELP}
help me please !
can you send me a twrp for nokia 1 ta-1047
i need to root my device to dowoad custom rom
MyTH30 said:
I'm having a kind of similar issue. I flashed twrp and now its stuck in a twrp loop. It boots only in twrp and not system. What should I do?
Click to expand...
Click to collapse
Same here. Seems that the decryption does not work. Better make sure your phone is not encrypted before messing with twrp (3.2.3).
Be careful
Some Nokia 1 are a TA 1060 variant number and if you flash the wrong file you are going to have further problems.
The process to root and get TWRP on the nokias Is complicated enough without everyone suggesting wrong model variants / numbers.
I guarantee someone will download the wrong file for the wrong model and come here crying.
is this the real firmware?
inkepinkje said:
http://www.mediafire.com/file/0xgn9o0b711wcw0/Nokia_1_TA-1047_MT6735_V8.1.0_180401.zip
Stock Rom for 1047
Download it.
Extract boot.img from that
boot into download mode/recovery
adb reboot recovery
answers to all your questions.... not the answer to fix your problem I think... But have a go.
And last but not least... Please use the search option first or google instead of asking all questions at once.
Or try to get familiar with rooting first...…
good luck buddy.
Click to expand...
Click to collapse
hi, i needed to know if this is the real one, they show it's mt6735 instead mt6737m, I've already downloaded a file with the similar name nd it has scatter file of mt6735, that's while in the sp flash tool,i don't see all of the partitions being detected to flash
Hey i am facing the same issue but i didn't flash any other recovery mode my phone Nokia 1 TA-1056 am getting black screen and only feel the vibration when i press power key and when i put my phone on charging then its shows the display and boot into recovery mode directly can anyone help me how i can overcome this issue
Note 8 V5 Bootloaders If Not Already On Safestrap Follow My EDL Pie Safestrap Method
Please Note This Is Not A Root Method For Oreo Or Pie. As Of Now There Is Still No Root Method For Oreo Or PieThis Takes Some Patience To Install
N8 SM-N955U/U1/W Install Instructions And Files
Download
SM_N950_DSF6_SYSTEM.rar Latest Build
Install Instructions Safestrap Method
Make Sure The Latest Samsung Drivers Are Installed. They Can Be Found Here
1. Copy ****_SYSTEM.img to your internal sdcard. Reboot to download mode and in BL slot in Odin flash Use The BL_ENG_BOOTLOADERS_SAFESTRAP_N950U_V5.tar.md5 and reboot to safestrap
2. In Safestrap choose install then choose select storage and select internal storage click ok then at bottom choose install image and choose ****_SYSTEM.img then select flash to system image then swype to flash
3. Now chose zip and flash Safestrap-4.10-B03-GREATQLTE-PIE.zip
4. To leave safestrap reboot to download mode
5. In odin load BL_N950USQU5****tar.md5 in BL slot and flash
To Enter And Exit Safestrap After Intitial Install
1. To enter safetrap flash the BL_ENG_BOOTLOADERS_SAFESTRAP_N950U_V5.tar.md5 in BL Slot in odin phone will boot too safestrap sometimes it may take a minute to do so
2. To leave safestrap reboot to bootloader or download still does not work so you still need to manually reboot to bootloader
3. Use modded Odin and load BL_N950USQU5****tar.md5 In BL Slot
Helpful Key Combos
Recovery Mode
Bixby + Volume Up + Power @ Same time
Download Mode
Bixby + Volume Down + Power @ Same time
Safe Mode
Phone Powered Off
Press and hold the Power key past the model name screen.
When “SAMSUNG” appears on the screen, release the Power key.
Immediately after releasing the Power key, press and hold the Volume down key.
Maintenance Mode
Press and hold the Power + Volume Down buttons for approximately 10
Bugs:
DO NOT USE ENCRYPTION
Safestrap rom slots do not work
Safestrap might not read larger than 64gig sd cards on some cards
Formating data in safestrap may cause reboot so make sure to format data very last thing
What Is Safestrap
Safestrap is a Bootstrap / Recovery for locked bootloader phones. Safestrap is now based on TWRP Recovery (a touch based recovery) and you can perform .zip installs, backups and restores here.
View attachment 4531040View attachment 4531041View attachment 4531042View attachment 4531043View attachment 4531044View attachment 4531045
Credits:
- @Raymonf for modified odin
- @afaneh92 for safestrap Main Thread Here Consider a donation to him he worked along time on this Donation Link
- @me2151 for finding this method
- @tytydraco for some instructions
- @mweinbach for some instructions
- @Craz Basics for xposed on non rooted
- @partcyborg for finding the root method!
- @elliwigy for being great help and original S8 root
- @rayan-refoua for boot animation
- @SamGuy2020 for testing S8 install method
Click to expand...
Click to collapse
View attachment Safestrap-4.10-B03-GREATQLTE-NOUGAT.zip Needed If running nougat rom
View attachment Safestrap-4.10-B03-GREATQLTE-PIE.zip Needed If running Pie rom
Main question I have is about the battery do we get %100 on the unrooted pie?
DroidisLINUX said:
Main question I have is about the battery do we get %100 on the unrooted pie?
Click to expand...
Click to collapse
Still 80% battery.
Sent from my Pixel 3 XL
DroidisLINUX said:
Main question I have is about the battery do we get %100 on the unrooted pie?
Click to expand...
Click to collapse
Yes
Sent using some kind of device I modified
Eudeferrer said:
Still 80% battery.
Sent from my Pixel 3 XL
Click to expand...
Click to collapse
80 percent is only on rooted nougat. Pie is unrooted and battery will charge to 100 percent
Sent using some kind of device I modified
jrkruse said:
80 percent is only on rooted nougat. Pie is unrooted and battery will charge to 100 percent
Sent using some kind of device I modified
Click to expand...
Click to collapse
Magisk just tweeted that the "world's first true system-as-root" was just created. Do you think that with this we could achieve root for Pie? Or would this not change anything?
Sent from my Pixel 3 XL
Eudeferrer said:
Magisk just tweeted that the "world's first true system-as-root" was just created. Do you think that with this we could achieve root for Pie? Or would this not change anything?
Sent from my Pixel 3 XL
Click to expand...
Click to collapse
All that a and b partition stuff reefers to phones that were released with pie. Our phone is still old school no treble support.
Sent using some kind of device I modified
Would I have to flash every time i want to enter safestrap?
also if I were to want to revert to the rooted nougat ROM, do I have to follow all the steps on the rooting guide or could I just flash an image through safestrap?
purpleuser said:
also if I were to want to revert to the rooted nougat ROM, do I have to follow all the steps on the rooting guide or could I just flash an image through safestrap?
Click to expand...
Click to collapse
you can just flash image in safestrap and then flash the safestrap for nougat zip in post 2 (or its included in the new DSF6 build) after you flash the nougat system image in safestrap to get back to nougat safestrap. If you fail to flash the safestrap zip for nougat your phone will automatically boot to safestrap on every reboot on a nougat rom.
jrkruse said:
you can just flash image in safestrap and then flash the safestrap for nougat zip in post 2 (or its included in the new DSF6 build) after you flash the nougat system image in safestrap to get back to nougat safestrap. If you fail to flash the safestrap zip for nougat your phone will automatically boot to safestrap on every reboot on a nougat rom.
Click to expand...
Click to collapse
Thanks for answering my question. I'm new to all of this, so I appreciate the guidance.
Another question. Would I brick my phone if I tried to flash a ROM image with a v3 bootloader through safestrap?
purpleuser said:
Thanks for answering my question. I'm new to all of this, so I appreciate the guidance.
Another question. Would I brick my phone if I tried to flash a ROM image with a v3 bootloader through safestrap?
Click to expand...
Click to collapse
You can flash a system image from v3 firmware but must remain on v5 boot and recovery images and bootloaders and modems
Sent using some kind of device I modified
Nice this ROM just goes over the Nougat image with all my settings and apps intact. Even the pay apps are working (probably because no root). Now I just need to find a way to flash Viperaudio drivers then I'm all set.
jrkruse said:
You can flash a system image from v3 firmware but must remain on v5 boot and recovery images and bootloaders and modems
Sent using some kind of device I modified
Click to expand...
Click to collapse
Awesome. This is great. Thanks
Hey, is it alright to do an update for June Security Patch? It's changing my build number to N950USQS / N950UOYN - DSF3.
vman00 said:
Nice this ROM just goes over the Nougat image with all my settings and apps intact. Even the pay apps are working (probably because no root). Now I just need to find a way to flash Viperaudio drivers then I'm all set.
Click to expand...
Click to collapse
I've tried to flash a few different viper zips in safestrap to no avail. The driver would not load. I was told that root is needed to actually "load" the drivers, even if you install them via safestrap. I'm not sure this is true though because if it was, the viper app would ask for root privs, wouldn't it? Anyways, if you make any progress let me know I need that viper in my life.
BotsOne said:
I've tried to flash a few different viper zips in safestrap to no avail. The driver would not load. I was told that root is needed to actually "load" the drivers, even if you install them via safestrap. I'm not sure this is true though because if it was, the viper app would ask for root privs, wouldn't it? Anyways, if you make any progress let me know I need that viper in my life.
Click to expand...
Click to collapse
might as well wait for rootless
https://forum.xda-developers.com/android/apps-games/app-viper4android-fx-2-6-0-0-t3774651
vman00 said:
might as well wait for rootless
https://forum.xda-developers.com/android/apps-games/app-viper4android-fx-2-6-0-0-t3774651
Click to expand...
Click to collapse
You should be able to change the permissions for the files themselves with safestrap you can change file permissions if it allows us read write to system then you could try making an init script to load in on boot with rooted permissions to load the viperaudio like an init.d
Vipermod start service this is just off of the top of my head but I will look into more this weekend when I got some time to test out the new rom and safestrap
Viper will not work without root because it needs to execute a script at startup and no scripts will execute on a stock system. There were or maybe are rootless version but they still needed a permissive kernel to work
Sent using some kind of device I modified
Hello everyone, my phone is samsung note 10 plus, I have twrp installed and rooted with magisk, I'm on Android 9, I somehow lost root, have no idea how, I'm very careful not to allow updates or google to install something there might affect my root.
when I go to magisk I'm getting the image that I've attached, when I click on install magisk, download the zip file and try to install it I get an an error as show in the 2nd image, saying unsupported/unknown image forma. I've also attached the log file. Is there any way for me to fix this without flashing the rom and start from scratch? Can I repair it somehow, maybe with TWRP?
Thank you all in advance
you have boot.img of the device?
i thought you can only install magisk in 2 way by flashing boot.img unto magisk or flashing magisk.zip unto TWRP as recovery partition
#edit how did you install magisk in the beginning? thats how you will install it again
there a chance you will get your device brick if you install magisk wrong way (A/B partition) but since you already install it previously just reinstall it back
Hmmm, where should I have the boot. Img you mean as if I backed it up on my pc? Or I can download it and use it?
Now I'm confused :/
Before i explain i don't take responsibility for any damages caused on your device if you decided to follow my tutorial .
So basically there's 2 way to install Magisk
• Image Patching - Basically this is what most people do they find stock boot.img and recovery.img for there devices
1. Copy the Stock boot.img or recovery.img to your device
2. Download and install the latest Magisk Manager
If you are patching a recovery image, manually check “Recovery Mode” in Advanced Settings!
Press Install → Install → Select and Patch a File, and select your stock boot or recovery image file
Magisk Manager will patch the image, and store it in [Internal Storage]/Download/magisk_patched.img
Now pull the magisk_patched.img with ADB:
adb pull /sdcard/Download/magisk_patched.img
Flash the patched boot.img or recovery.img to your device and reboot.
For most devices, here is the fastboot command:
fastboot flash boot magisk_patched.img or
fastboot flash recovery magisk_patched.img if you are patching a recovery image
Now you are rooted
•Custom Recovery - This is when you do not have Stock boot.img or recovery.img for your device
( High Chance Of Phone Getting Bricks )
1. Download and install the latest Magisk Manager
2. Download Magisk.zip (https://github.com/topjohnwu/Magisk/releases/) choose the Latest Release
3.Now reboot to recovery (TWRP, CWM ... ETC)
if you use stock recovery it should say "apply update via sdcard"
then just choose Magisk.zip
4. Now if you have TWRP just click Install and choose Magisk.zip
5. wait for the process
6. Now you are Rooted (hopefully xD :fingers-crossed
ineedroot69 said:
Before i explain i don't take responsibility for any damages caused on your device if you decided to follow my tutorial .
So basically there's 2 way to install Magisk
• Image Patching - Basically this is what most people do they find stock boot.img and recovery.img for there devices
1. Copy the Stock boot.img or recovery.img to your device
2. Download and install the latest Magisk Manager
If you are patching a recovery image, manually check “Recovery Mode” in Advanced Settings!
Press Install → Install → Select and Patch a File, and select your stock boot or recovery image file
Magisk Manager will patch the image, and store it in [Internal Storage]/Download/magisk_patched.img
Now pull the magisk_patched.img with ADB:
adb pull /sdcard/Download/magisk_patched.img
Flash the patched boot.img or recovery.img to your device and reboot.
For most devices, here is the fastboot command:
fastboot flash boot magisk_patched.img or
fastboot flash recovery magisk_patched.img if you are patching a recovery image
Now you are rooted
•Custom Recovery - This is when you do not have Stock boot.img or recovery.img for your device
( High Chance Of Phone Getting Bricks )
1. Download and install the latest Magisk Manager
2. Download Magisk.zip (https://github.com/topjohnwu/Magisk/releases/) choose the Latest Release
3.Now reboot to recovery (TWRP, CWM ... ETC)
if you use stock recovery it should say "apply update via sdcard"
then just choose Magisk.zip
4. Now if you have TWRP just click Install and choose Magisk.zip
5. wait for the process
6. Now you are Rooted (hopefully xD :fingers-crossed
Click to expand...
Click to collapse
Thank you very much.
OK, I tried method 2 and didn't work. I downloaded my stock firmware and I have the image file, I can try the first one to place the image in the root of the phone, patch the file with magisk and reflesh it with Odin?
Will I lose all my stuff on the phone by doing this? Thank you
i remember using odin back in 2012 for my samsung galaxy y i didn't know people still using that thing
i search your device on google and it said samsung provide the kernel for it ( https://www.xda-developers.com/samsung-galaxy-note-10-kernel-source-code/amp/ ) thats a good start for rooting your device try looking for it
also visit https://forum.xda-developers.com/galaxy-note-10 it is dedicated section for your device model which means all threads and post are for your device model
ineedroot69 said:
i remember using odin back in 2012 for my samsung galaxy y i didn't know people still using that thing
i search your device on google and it said samsung provide the kernel for it ( https://www.xda-developers.com/samsung-galaxy-note-10-kernel-source-code/amp/ ) thats a good start for rooting your device try looking for it
also visit https://forum.xda-developers.com/galaxy-note-10 it is dedicated section for your device model which means all threads and post are for your device model
Click to expand...
Click to collapse
Im already rooted....
Im having issues how to fix the root as i somehow don't have it any more and i don't want to reflash my rom if I'll lose all my stuff on the phone. Im looking how to fix the root.
drazenm said:
Im already rooted....
Im having issues how to fix the root as i somehow don't have it any more and i don't want to reflash my rom if I'll lose all my stuff on the phone. Im looking how to fix the root.
Click to expand...
Click to collapse
He's just saying to re-root it... If you lost root it's more than likely gone and you'll have to do whatever you did to gain root in the beginning. I constantly backup all my apps, data, pictures and everything to my little USB OTG thumb drive and to my laptop. I do this daily because many times a factory reset is what has to happen depending on what's going on. You can grab a Samsung micro sdcard 128 GB for $18-$19 or so online or thumb drives like I have a SanDisk 128gb.. it was $14. Just some thoughts for moving ahead so you don't have to go through this again. Lots of good suggestions here. If I were you I'd hit the "thanks" button on whenever took time to stop and search for answers to your issue. That's what we do here on xda. I could care less about racking up "thanks" count just throwing that out there so that you know..
Good luck on getting her all fixed. The note 10 is a real gem!
Sent from my marlin using XDA Labs
flash713 said:
He's just saying to re-root it... If you lost root it's more than likely gone and you'll have to do whatever you did to gain root in the beginning. I constantly backup all my apps, data, pictures and everything to my little USB OTG thumb drive and to my laptop. I do this daily because many times a factory reset is what has to happen depending on what's going on. You can grab a Samsung micro sdcard 128 GB for $18-$19 or so online or thumb drives like I have a SanDisk 128gb.. it was $14. Just some thoughts for moving ahead so you don't have to go through this again. Lots of good suggestions here. If I were you I'd hit the "thanks" button on whenever took time to stop and search for answers to your issue. That's what we do here on xda. I could care less about racking up "thanks" count just throwing that out there so that you know..
Good luck on getting her all fixed. The note 10 is a real gem!
Sent from my marlin using XDA Labs
Click to expand...
Click to collapse
I can re root it, that's not the problem, i can do it with the patched magisk boot image through Odin, im asking if that's gonna wipe off everything on my phone. Because i can't backup certain things without titanium backup, and titanium requires root access. Thank you for your help and everyone's else's im well aware and grateful for the attempts, suggestions etc.
no it's not gonna wipe anything thats why magisk is called "systemless" . It will essentially modify the system without actually modifying it.
if you flash magisk_patched.zip nothing noticeable will happen except you will have root access
all your installed application will be there
also i notice this some people actually copy magisk_patched.zip thats really bad idea you need to let Magisk generate it.
For example you have 2 phones same model and same build version .
You generate magisk_patched.zip on the phone A
then decided to copy magisk_patched.zip into phone B ofcourse it will still works
but since you just copy it and didnt let magisk generate it . It would not make backup for boot or recovery partition
if you uninstall Magisk on your phone B .There is really high super ultra mega chance of your phone getting bricks. Also it would not revert any changes done on the period while Magisk is installed
ineedroot69 said:
no it's not gonna wipe anything thats why magisk is called "systemless" . It will essentially modify the system without actually modifying it.
if you flash magisk_patched.zip nothing noticeable will happen except you will have root access
all your installed application will be there
also i notice this some people actually copy magisk_patched.zip thats really bad idea you need to let Magisk generate it.
For example you have 2 phones same model and same build version .
You generate magisk_patched.zip on the phone A
then decided to copy magisk_patched.zip into phone B ofcourse it will still works
but since you just copy it and didnt let magisk generate it . It would not make backup for boot or recovery partition
if you uninstall Magisk on your phone B .There is really high super ultra mega chance of your phone getting bricks. Also it would not revert any changes done on the period while Magisk is installed
Click to expand...
Click to collapse
Thanks for the help, please correct me if im wrong.
Im supposed to copy the AP . md5 file to the root directory of my phone, patch it with magisk, get the patched file, copy it on the pc, connect phone to the pc, get it into download mode, flash the patched file with Odin and that should be it?
Or maybe i can do it with twrp?
Any suggestions?
drazenm said:
Any suggestions?
Click to expand...
Click to collapse
1. Install the latest Magisk Manager
2. In Magisk Manager: Install → Install → Select and Patch a File and select the AP tar file.
Magisk Manager will patch the whole firmware file and store the output to [Internal Storage]/Download/magisk_patched.tar
3. Copy the patched file to your PC with adb pull /sdcard/Download/magisk_patched.tar. Do not use MTP as it is reported to corrupt files.
4. Reboot to download mode, and flash magisk_patched.tar as AP in Odin, together with the BL, CP and HOME_CSC files. Never flash only an AP file, as Odin can shrink your /data file-system if you do.
Important: Uncheck "Auto Reboot" in Options!
5. Magisk is now successfully flashed to your device! But there are still several steps before you can properly use the device.
6. We now want to boot into the stock recovery to factory reset our device.
Full data wipe is mandatory! Do not skip this step.
Press Power + Volume Down to exit download mode. As soon as the screen turns off, immediately press the combo key to boot to recovery (e.g. on the S10 it is Power + Bixby + Volume Up). Since we want to boot into stock recovery, continue pressing the volume up button until you see the stock recovery screen.
7. Use volume buttons to navigate through the stock recovery menu, and the power button to select an option. Choose Wipe data/factory reset to wipe the data of the device.
8. This time, we can finally boot to the system with Magisk. Select Reboot system now, and immediately press the combo key to recovery. After seeing the bootloader warning screen, release all buttons so it can boot to the system.
9. The device will automatically reboot for the first time it boots. This is completely normal and done by design.
10. After the device is booted up, do the usual initial setup. The following steps will need an internet connection.
11. Magisk Manager will ask to do additional setups. Let it do its job and the app will automatically reboot your device.
12. Voila! Enjoy Magisk
credit to @Magisk github
you can read the full tutorial here https://github.com/topjohnwu/Magisk/blob/master/docs/install.md
ineedroot69 said:
1. Install the latest Magisk Manager
2. In Magisk Manager: Install → Install → Select and Patch a File and select the AP tar file.
Magisk Manager will patch the whole firmware file and store the output to [Internal Storage]/Download/magisk_patched.tar
3. Copy the patched file to your PC with adb pull /sdcard/Download/magisk_patched.tar. Do not use MTP as it is reported to corrupt files.
4. Reboot to download mode, and flash magisk_patched.tar as AP in Odin, together with the BL, CP and HOME_CSC files. Never flash only an AP file, as Odin can shrink your /data file-system if you do.
Important: Uncheck "Auto Reboot" in Options!
5. Magisk is now successfully flashed to your device! But there are still several steps before you can properly use the device.
6. We now want to boot into the stock recovery to factory reset our device.
Full data wipe is mandatory! Do not skip this step.
Press Power + Volume Down to exit download mode. As soon as the screen turns off, immediately press the combo key to boot to recovery (e.g. on the S10 it is Power + Bixby + Volume Up). Since we want to boot into stock recovery, continue pressing the volume up button until you see the stock recovery screen.
7. Use volume buttons to navigate through the stock recovery menu, and the power button to select an option. Choose Wipe data/factory reset to wipe the data of the device.
8. This time, we can finally boot to the system with Magisk. Select Reboot system now, and immediately press the combo key to recovery. After seeing the bootloader warning screen, release all buttons so it can boot to the system.
9. The device will automatically reboot for the first time it boots. This is completely normal and done by design.
10. After the device is booted up, do the usual initial setup. The following steps will need an internet connection.
11. Magisk Manager will ask to do additional setups. Let it do its job and the app will automatically reboot your device.
12. Voila! Enjoy Magisk
credit to @Magisk github
you can read the full tutorial here https://github.com/topjohnwu/Magisk/blob/master/docs/install.md
Click to expand...
Click to collapse
Thanks so much for your help, but i just want to get root back on my phone as i had it rooted already, i dont want to wipe off everything and lose my stuff. There are things that i can only backup with titanium backup, which i can't use now without root privileges :/ can i repair root somehow?
how did you lose your root anyway?
your Android OS updated?
you can try restoring apps with titanium backup but i don't think it will restore Magisk being installed again and gaining root access
ineedroot69 said:
how did you lose your root anyway?
your Android OS updated?
you can try restoring apps with titanium backup but i don't think it will restore Magisk being installed again and gaining root access
Click to expand...
Click to collapse
I didn't do the update, but something did mess up the root aa you can see on the photos that I've attached at the beginning of the topic. I just want to reroot my phone again but not to loose all my current stuff on it.
if you have boot.img or recovery.img for your device you might not lose your stuff installing back magisk but i think you only have the whole firmware ".tar.md5" flashing thats is like factory reset for your phone
#edit i read about ".tar.md5" they say if you just extract it .It contains all stock .img file for your device such as boot.img, recovery.img , system.img ...etc
since i have too much free time can you upload the firmware ".tar.md5" of your device i will upload .boot.img and recovery.img for you
ineedroot69 said:
if you have boot.img or recovery.img for your device you might not lose your stuff installing back magisk but i think you only have the whole firmware ".tar.md5" flashing thats is like factory reset for your phone
#edit i read about ".tar.md5" they say if you just extract it .It contains all stock .img file for your device such as boot.img, recovery.img , system.img ...etc
since i have too much free time can you upload the firmware ".tar.md5" of your device i will upload .boot.img and recovery.img for you
Click to expand...
Click to collapse
thank you for taking your time to help me out, i appreciate it.
here is the link to the firmware file:
https://androidfilehost.com/?fid=6006931924117937015
inside are these files:
AP_N975FXXU1ASH5_CL16618471_QB25345699_REV01_user_low_ship_meta_OS9.tar.md5
BL_N975FXXU1ASH5_CL16618471_QB25345699_REV01_user_low_ship.tar.md5
CP_N975FXXU1ASH5_CP13587367_CL16618471_QB25409313_REV01_user_low_ship.tar.md5
CSC_OMC_OXM_N975FOXM1ASH5_CL16618471_QB25349308_REV01_user_low_ship.tar.md5
HOME_CSC_OMC_OXM_N975FOXM1ASH5_CL16618471_QB25349308_REV01_user_low_ship.tar.md5
ineedroot69 said:
if you have boot.img or recovery.img for your device you might not lose your stuff installing back magisk but i think you only have the whole firmware ".tar.md5" flashing thats is like factory reset for your phone
#edit i read about ".tar.md5" they say if you just extract it .It contains all stock .img file for your device such as boot.img, recovery.img , system.img ...etc
since i have too much free time can you upload the firmware ".tar.md5" of your device i will upload .boot.img and recovery.img for you
Click to expand...
Click to collapse
Any luck?
drazenm said:
Any luck?
Click to expand...
Click to collapse
sorry for late reply i'm kinda busy but to make it easier on my part (downloading 5GB file would take me 5 hours) can you just upload the following ?
AP_N975FXXU1ASH5_CL16618471_QB25345699_REV01_user_ low_ship_meta_OS9.tar.md5
BL_N975FXXU1ASH5_CL16618471_QB25345699_REV01_user_ low_ship.tar.md5
CP_N975FXXU1ASH5_CP13587367_CL16618471_QB25409313_ REV01_user_low_ship.tar.md5
Hi,
I have a stock ANE-LX1 9.1.0.355(C55E8R1P6)
I just can't root the phone!!!!
I tried both flashing the Magisk zip from TWRP and patching the recovery_ramdis.img from the app and then flashing from fastboot, but
Magisk Manager just doesn't see Magisk.
Plz help, thanks
David
DP FH said:
Hi,
I have a stock ANE-LX1 9.1.0.355(C55E8R1P6)
I just can't root the phone!!!!
I tried both flashing the Magisk zip from TWRP and patching the recovery_ramdis.img from the app and then flashing from fastboot, but
Magisk Manager just doesn't see Magisk.
Plz help, thanks
David
Click to expand...
Click to collapse
Hey dude try this way out...
- Download Magisk manager apk. , patched recovery_ramdisk and TWRP for 9.1:
https://mega.nz/#!ohkgwSzb!xD32btG_3Sax-V7bn6xbWR5fH0crPrry06cCxusf5Hg
https://mega.nz/#!tkcTlATI!A8UJGPBGtxJbLcUOJoxCGJj5PFZXzCnjbb3OkwqKTP8
https://mega.nz/#!xkd2ibKY!JCLNMNKRI1e0FI1bJ4YI5Lr9Hdg9eo4A9kv0MhxgIdA
Copy TWRP and patched recovery_ramdisk to SD Card, install Magisk manager apk.
- Install TWRP over eRecovery: flash downloaded TWRP 9.1 from fastboot, boot in TWRP, select storage - SD Card, select "Install image". Find TWRP-9.1.img file , mark eRecovery and confirm. Reboot system.
- When the yellow unlocked phone warning appears, press and hold Volume Up , phone will boot into TWRP.
- Select Install image, find Recovery_ramdisk-patch.img , mark Recovery, confirm.
- Go back to the main TWRP's menu > Reboot > Reboot recovery. Phone will reboot via Recovery , but not into Recovery mode. Now every time you want to boot phone with root access must hold volume up and power at the beginning . if you boot phone normaly (not thro recovery comand) your phone will not be rooted!
Now you have a rooted phone with TWRP on board.
Ok thanks, isn't it possible to workaround the volume up stuff? How do I boot twrp after I finished? Vol+ and power button or vol+ and cable? To my understanding, this boots two different recoveries?? Why is it so complicated lol
DP FH said:
Ok thanks, isn't it possible to workaround the volume up stuff? How do I boot twrp after I finished? Vol+ and power button or vol+ and cable? To my understanding, this boots two different recoveries?? Why is it so complicated lol
Click to expand...
Click to collapse
Is your patched_ramdisk "universal" ? I meant will it work on phone with different cust (mine is c55, most have c432 and maybe with different emui version? Where did you get it?)
- it is just an alternative, the method with patched recovery_ramdisk and fastboot should also work. Maybe you're doing something wrong.
- It is complicated due to emui 9.1, the ramdisk partition no longer exists. As a workaround, Magisk will be installed to the recovery_ramdisk partition.
- AFAIK partitions Recovery and eRecovery are the same for all build numbers and regions (we are talking about ANE- models and EMUI 9.1), so it should work.
- "How do I boot twrp after I finished?" - read carefully please: " Reboot system. When the yellow unlocked phone warning appears, press and hold Volume Up , phone will boot into TWRP."
P.S.: I never try to convince anyone of anything, it's your choice .
If you do not understand something here, than the tutorial might not be suitable for you.
There are plenty of guides on how to do these things. GL!
-Alf- said:
-the method with patched recovery_ramdisk and fastboot should also work.
Click to expand...
Click to collapse
I tried the following:
Booting into TWRP, getting recovery_ramdisk with dd, patching image with manager, boot into twrp, flash new recovery_ramdisk with dd, reboot.
Getting recovery_ramdisk from official update, patching etc.
Flashing official Magisk v21.1 with zip. The new image is flashed because the second time it will say "magisk patched image detected" (even if i reboot into twrp again), but still no root.
Sincerely I do not understand what I'm doing wrong. I know myself it should be easy.
I understand the tutorial (and thank you for it, you are a very kind person) I just don't understand why huawei made things so unnecesarely complicated. How does the phone boot without a ramdisk? Is "normal" ramdisk included in the kernel partition or in the recovery_ramdisk partition? Ok I get it, if there is no ramdisk the phone boots directly from the system on root partition, so magisk should mod that partition but it can't because it defeats the purpose of "systemless". Right?
There are plenty of guides, yeah, but everyone says the same thing (magisk zip or patched ramdisk) and people just say it works... but in my case it just... doesn't
Will try to follow your guide to the letter... Thank you again...
Ramdisk is included in the recovery_ramdisk, that's why Magisk will be installed to the recovery_ramdisk partition. Read carefully bro
Note: if you want use TWRP on rooted EMUI 9.1, you MUST install TWRP over eRecovery.
DP FH said:
I tried the following:
Flashing official Magisk v21.1 with zip.
Click to expand...
Click to collapse
Try with lower version , v20.0 or v20.4
Ok, thank you for your tips. I will update you once I have time to spend on this.
This is my first post of this kind so bear with me, please
Info for Galaxy A8 Star:
CPU : SDM660 ( A only, 64bit )Support Project TrebleSupport System as root
※WARNING※
You will have to have OEM unlocked and this will void your warranty!!!
※also, I'm not responsible for the accident about you bricking your device※Step. 1
First of all, you will need to download two custom recoveries (TWRP, OrangeFox)
OrangeFox: https://forum.xda-developers.com/t/orange-fox-recovery-galaxy-a8-star-sm-g885f.4301055/
TWRP: https://github.com/sabpprook/android_device_samsung_astarqlte (test3 file does not work for me but you can try)
I want to finish it only using TWRP but the only TWRP that was working does NOT support flashing the system.img files
and also Orange Fox recovery has a bug that while in recovery you can't connect with the computer and push the files to the phone
so it was required to use two bootloader
Step. 2
Odin: https://odindownload.com/
I also recommend downloading the stock ROM for backup
1. after downloading the TWRP from the link (for Odin we will use the .tar file)
put your phone into download mode
Code:
adb reboot download
or just turn off the phone and press the power button, volume up, Bixby button at the same time
and use the volume button to boot into download mode
2. after the phone went to the download mode, go to Odin and at the ap section add the TWRP file then flash it
3. press the volume down, power button to turn off the device, and right after that press the power button, volume up, Bixby button at the same time
4. you will now see the TWRP recovery, press wipe, and format data
5. now we will download some files we needed
makemesar.zip: (at the attachment) or you can download it from https://drive.google.com/u/0/uc?export=download&confirm=P1-1&id=1F_f_tL4sEYFx5fa6AnwR0x1tlYhqarcT ( when you unzip it there is the zip file )Permissiver_5.zip: https://androidfilehost.com/?fid=6006931924117940902Disable_Dm-Verity_ForceEncrypt: https://drive.google.com/file/d/166texWJQhR1RgRoXiRSH_M2Q2mAyS2gC/viewCertification_Patch.zip: (at the attachment)Havoc Rom (you can use any rom you want but this is the one that I've managed to work) http://download.havoc-os.com/?dir=arm64-ab (download arm64 ab with gapps)most rooms with AB partition will be supportedMagisk: https://magiskmanager.com/ (download the apk and make it a zip file) - you could need for the phone to get the boot (makemesar will unroot it so don't worry)6. after downloading all the files that we need, we will push the files to our device using
Code:
adb push 'file dir' sdcard
※ also push TWRP .img file and the OrangeFox .img too!!
7. after pushing all the files we need to our phone, press install from the TWRP recovery and press flash from image
and select the Orange Fox .img as a recovery image, and reboot to bootloader
8. now you will boot to the Orange Fox recovery, (locate to data/media to find the files)
at the Orange Fox recovery wipe System, Dalvlk / ART Cache, Cache, Data
9. after wiping now install the os.img file and reboot to the bootloader (before reboot you will see the warning that OS is not installed), go to the menu and mount system, vendor, and install Dm Verity.zip, Permissiver_5.zip, makemesar.zip then reboot to the bootloader again, (now we will not see the OS is not installed) and now install the Certification Patch.zip
10. reboot to the system and you will see the new os setup process (sometimes you have to install the Certification Patch after setup the os )
10-1. if your device keeps going to download mode, reinstall the magisk and then reboot the phone, then it will work.
(after it boots, gently turns off the phone and install makemesar.zip first and install Dm-Verity to unroot) - some of you will be forced to use magisk but doing some wiping or reflashing the system.img sometimes makes the unrooted state work (or flash the stock system.img (extract from the stockrom) and flash the gsi ROM without wiping )
Screenshots: At Below
Currently, MTP does not work but I think this is the problem with the Havoc os, if you use another rom it could work
face unlock, fingerprint unlock works, the camera works.
if I manage to get other ROMs workingI will update the post
also at the first time I have made mine to boot without magisk but while doing again for this post I'm having trouble without magisk, if I found a way that works always I will add that to the post
[UPDATE#2]
you can download the Pixel 3 gsi rom from
(Thanks for Santa Duck providing this information!!!!)
with this files you can install the android 12 gsi rom in a usable state!!
and also ADB is working with this rom
there is still a bootlooping bug so do it with caution
[Update#1]
Today I have managed to install the Android Beta 3.1 [ is beta software and I don't recommend using it as your daily os]
https://sourceforge.net/projects/nippongsi/files/Pixel%20-%20Pixel4a_SBeta3.1%20-%20TBO42ZZ8IF/Pixel4a_SBeta3.1-AB-12-20210727-nippongsi.img.gz/download
you can download the ROM file from Nippon's Sourceforge
every step is the same and you just have to change the rom as this
there's a bug that developer setting crash the settings app and it is working but it does have some lots of bugs, and screen lock is not working but I'll try to fix it and upload the method
if your device get boot looped, press Bixby + power + vol down to boot into download mode and flash the stock AP file using Odin
[I was supposed to edit the upper one but accidentally created as a reply ]
Just go to UPDATE#2
Skuld Norniern said:
Havoc Rom (you can use any rom you want but this is the one that I've managed to work) http://download.havoc-os.com/?dir=arm64-ab (download arm64 ab with gapps)
Click to expand...
Click to collapse
Hey I thought that A8 star is an A-only device. Does flashing A/B roms cause any problems?
thongass000 said:
Hey I thought that A8 star is an A-only device. Does flashing A/B roms cause any problems?
Click to expand...
Click to collapse
thanks for the makemesar.zip we can install the A/B partition roms without any problems on the A only device and for me the A only roms won’t work on my phone
Skuld Norniern said:
thanks for the makemesar.zip we can install the A/B partition roms without any problems on the A only device and for me the A only roms won’t work on my phone
Click to expand...
Click to collapse
Hi I'm back. Do you have any issue with wired audio? I have a A9 2018 (same chipset) and audio still goes through speaker while headphones are plugged in.
If anything in Phh Treble Settings helps you, please tell me. Or if you don't need any settings for wired audio, can you send me a zip file containing any files that have the name "audio_policy" in /vendor/etc? Thanks.
thongass000 said:
Hi I'm back. Do you have any issue with wired audio? I have a A9 2018 (same chipset) and audio still goes through speaker while headphones are plugged in.
If anything in Phh Treble Settings helps you, please tell me. Or if you don't need any settings for wired audio, can you send me a zip file containing any files that have the name "audio_policy" in /vendor/etc? Thanks.
Click to expand...
Click to collapse
Sorry for being late!!
for me, I do have the same issue with wired audio and I have not been able to find a way to fix it yet
if I manage to fix the issue I will fix the main article
Skuld Norniern said:
Skuld Norniern said:
This is my first post of this kind so bear with me, please
Info for Galaxy A8 Star:
CPU : SDM660 ( A only, 64bit )Support Project TrebleSupport System as root
※WARNING※
You will have to have OEM unlocked and this will void your warranty!!!
※also, I'm not responsible for the accident about you bricking your device※Step. 1
First of all, you will need to download two custom recoveries (TWRP, OrangeFox)
OrangeFox: https://forum.xda-developers.com/t/orange-fox-recovery-galaxy-a8-star-sm-g885f.4301055/
TWRP: https://github.com/sabpprook/android_device_samsung_astarqlte (test3 file does not work for me but you can try)
I want to finish it only using TWRP but the only TWRP that was working does NOT support flashing the system.img files
and also Orange Fox recovery has a bug that while in recovery you can't connect with the computer and push the files to the phone
so it was required to use two bootloader
Step. 2
Odin: https://odindownload.com/
I also recommend downloading the stock ROM for backup
1. after downloading the TWRP from the link (for Odin we will use the .tar file)
put your phone into download mode
Code:
adb reboot download
or just turn off the phone and press the power button, volume up, Bixby button at the same time
and use the volume button to boot into download mode
2. after the phone went to the download mode, go to Odin and at the ap section add the TWRP file then flash it
3. press the volume down, power button to turn off the device, and right after that press the power button, volume up, Bixby button at the same time
4. you will now see the TWRP recovery, press wipe, and format data
5. now we will download some files we needed
makemesar.zip: (at the attachment) or you can download it from https://drive.google.com/u/0/uc?export=download&confirm=P1-1&id=1F_f_tL4sEYFx5fa6AnwR0x1tlYhqarcT ( when you unzip it there is the zip file )Permissiver_5.zip: https://androidfilehost.com/?fid=6006931924117940902Disable_Dm-Verity_ForceEncrypt: https://drive.google.com/file/d/166texWJQhR1RgRoXiRSH_M2Q2mAyS2gC/viewCertification_Patch.zip: (at the attachment)Havoc Rom (you can use any rom you want but this is the one that I've managed to work) http://download.havoc-os.com/?dir=arm64-ab (download arm64 ab with gapps)most rooms with AB partition will be supportedMagisk: https://magiskmanager.com/ (download the apk and make it a zip file) - you could need for the phone to get the boot (makemesar will unroot it so don't worry)6. after downloading all the files that we need, we will push the files to our device using
Code:
adb push 'file dir' sdcard
※ also push TWRP .img file and the OrangeFox .img too!!
7. after pushing all the files we need to our phone, press install from the TWRP recovery and press flash from image
and select the Orange Fox .img as a recovery image, and reboot to bootloader
8. now you will boot to the Orange Fox recovery, (locate to data/media to find the files)
at the Orange Fox recovery wipe System, Dalvlk / ART Cache, Cache, Data
9. after wiping now install the os.img file and reboot to the bootloader (before reboot you will see the warning that OS is not installed), go to the menu and mount system, vendor, and install Dm Verity.zip, Permissiver_5.zip, makemesar.zip then reboot to the bootloader again, (now we will not see the OS is not installed) and now install the Certification Patch.zip
10. reboot to the system and you will see the new os setup process (sometimes you have to install the Certification Patch after setup the os )
10-1. if your device keeps going to download mode, reinstall the magisk and then reboot the phone, then it will work.
(after it boots, gently turns off the phone and install makemesar.zip first and install Dm-Verity to unroot) - some of you will be forced to use magisk but doing some wiping or reflashing the system.img sometimes makes the unrooted state work (or flash the stock system.img (extract from the stockrom) and flash the gsi ROM without wiping )
Screenshots: At Below
Currently, MTP does not work but I think this is the problem with the Havoc os, if you use another rom it could work
face unlock, fingerprint unlock works, the camera works.
if I manage to get other ROMs workingI will update the post
also at the first time I have made mine to boot without magisk but while doing again for this post I'm having trouble without magisk, if I found a way that works always I will add that to the post
[UPDATE#2]
you can download the Pixel 3 gsi rom from
(Thanks for Santa Duck providing this information!!!!)
with this files you can install the android 12 gsi rom in a usable state!!
and also ADB is working with this rom
there is still a bootlooping bug so do it with caution
Click to expand...
Click to collapse
Hello sir i can't find havoc os 4.5 in:https://download.havoc-os.com/?dir=arm64-ab
Click to expand...
Click to collapse
After flashing twrp on my sm g885f, cant get into terp,
mine shows volume down + power to restart, not to enter turn off
how can i enter into twrp
Skuld Norniern said:
9. after wiping now install the os.img file and reboot to the bootloader (before reboot you will see the warning that OS is not installed), go to the menu and mount system, vendor, and install Dm Verity.zip, Permissiver_5.zip, makemesar.zip then reboot to the bootloader again, (now we will not see the OS is not installed) and now install the Certification Patch.zip
Click to expand...
Click to collapse
'os.img file' where
, guess i fixed it
when installing Certification_Patch.zip, it shows command error
what i found- this patch is for G885FDXS5CUL1, mine is
G885FDXU5CUG1