After unlocking (read code) with xda2unlock and enter code in XDA2, the xda2 don't want to enter in network at all (radio say no service) also when i want a manual search of networks, phone come with an error. Any ideeas why? (phone ask pin no for sim card, but after entering no radio at all!)
florin_m said:
After unlocking (read code) with xda2unlock and enter code in XDA2, the xda2 don't want to enter in network at all (radio say no service) also when i want a manual search of networks, phone come with an error. Any ideeas why? (phone ask pin no for sim card, but after entering no radio at all!)
Click to expand...
Click to collapse
It could be a problem with the SIM unrelated to unlocking.
Does the SIM work in another phone? Does the SIM that came with the XDA2 still work? Have you tried another hard reset?
i tryed different SIM cards! the sim cards working fine! The original card not working anymore! I flashed the 1.6.0 in it now and the same radio stack seems not working fine! Can we rewrite the GSM settings again (maybe corupted)?
florin_m said:
i tryed different SIM cards! the sim cards working fine! The original card not working anymore! I flashed the 1.6.0 in it now and the same radio stack seems not working fine! Can we rewrite the GSM settings again (maybe corupted)?
Click to expand...
Click to collapse
So you also re-flashed it with a different ROM? I suspect that the problems are more related to this than due to the unlocking. The unlocking uses the official interface and no unorthodox methods are used to unlock it. I've had no reports from anyone that the phone did not work afterwards or even that the unlock code did not work. It is important to consider all aspects that could have influence else you might be hunting for the wrong solution.
Don't know what is realy rong with it. I locke it back (AT%HTCLOCK...) and now radio at least saying Searching (with same firmware). Do u have a full gsm backup (tunning as well?) maybe is something messed there.
I use ICQ or MSN or Yahoo messager can u please PM with ur details saw we can chat live?
Thank's
Try to change the band
HOW?
Radio does not work after unlock
Got the unlock code from Cingular. The code was accepted. Entered T-Mobile SIM but then phone will not make or receive calls. Even after putting original Cingular SIM it will not work.
Inserted another Cingular SIM and attempted call. It starts working. However, if I put T-Mobile SIM it would go back to same state.
Any help would be appreciated.
It is MDA 3 from Siemens for Cingular with Radio version 1.02.10
Hi all,
My friend attempted to unlock her X10i (not sure how), but basically although the phone boots past the SE logo, it sits on a blank screen with a cross through the network icon when any SIM is inserted.
I have flashed back (various ROMS) with SEflasher and now have the full menu, but it still wont recognise a SIM card. Is there a way to rectify this?
I get the message no SIM recognised when trying to use SETool, so I suspect its screwed something up.
Any Ideas to recover connectivity?
Thanks in advance.
Herbert
Can you still make any calls? Did you try to? In your network setting can you select your carrier?
Try to go in your APN setting and set them manually. Google your carrier APN setting and input all of them. I am in Rogers and i got around 5 of them for calling, internet, SMS, MMS, etc.
When done put your phone in Plane mode, wait a bit and put on 3G or wtv you use. See if it works. If not set them up and restart the phone.
You can also use this program: APN Backup&Restore. If you can roll back to a rom where it works or if a friend has Droid phone and is on the same network, install the app there, run it and backup the APN settings.
Then install that same app on your phone via FlashTool and put the backed-up file on your phone (SD Card) and use that app to restore the APN settings.
See if that works. I had a problem where i didnt have internet connection but could still make calls, use that manual setup/app and it worked for me.
Let me know if it works.
- Captain Scrat
check baseband plz !!! which method did u follow to unlock ur x10????
she messed up the service menu of the sim which only telecom operators should use. sadly, now she gotta get a new sim card.
Hi.
I have a big problem with my G2, and have tried many things.
It all started 2 weeks ago. I lost connection to my network.
I tried many things, and ended up giving it to a repair shop, in China, as I was there shortly. They put a new firmware into the phone, and a chinese SIM card worked.
I found an english version of the firmware, and asked them to update with that version, No problem. Everything worked well...but when I arrived back to Denmark, same problem. Not registered on the network.
Now I have tried many things, as Kies could not recognize the firmware version. I burned a 2.35 version into the phone with Odin, and Kies regocnized the version, and now updated to 4.03. Great, but ... I have the same problem. APN settings acc to my network provider. Oister 3 in Denmark.
I really have no idea what to do anymore. And I cant send it in for repair, as the flash counter says 10 times.
Is ther someone here, with a very deep knowledge in Logs etc, as I can send Logs if I am explained what to do.
The short time the phone worked, did I really love it.
And also the chinese SIM can not connect from Denmark.
I would prefer all Logs etc in private email, but if we solve it, I will poste solutions and results here.
Best of regrads
Morten
As for the counter, install and run triangleaway - it can be found in the SGSII section of XDA.
Check that the sim card works (try it on another phone) and borrow another sim card (on the same network). It is amazing how many problems like this are due to a damaged sim card or just not connecting correctly. I had a friend who took the sim card out to flash their Samsung Galaxy 3 and put in the sim card wrongly and couldn't make a call.
Can you copy your contacts to or create one in the sim card?
I doubt that it is a problem with the EFS folder, ie no IMEI number because it was fixed with a china sim, but it may be. Is the IMEI number you get from dialing *#06# 004999010640000 or different from the label under the battery? If so then you have a EFS folder problem. There is an app that may fix it - it requires root - * HERE *
Mobile network
Hi
Thanks for the reply.
A:
I can make, copy, edit etc contact directly at the simcard in the phone, and also copy, edit etc from Kies to the Sim card. And yes. It is the simcard I can do those things at. Double checked that it was somcard and not the phone memory
B:
Double checked the IMEI number again.
Label phone same as *#06#
Further information:
In the first day, I tried many many things to get the phone working.
I searched the internet a lot, and I found some kind of help. Like with IMEI check, I should type a code like *#xxxx# or *xxxx* Stupid as I was, I did not write down the code, and also did not safe the page on the internet, so I have no idea what code I wrote. I am sure it was something regarding Mobile network or CSC.
Reg Triangle away.
My phone is no longer rooted, as I try to have it in original mode, so its ready to send to repair, if needed. Triangleaway needs the phone to be routed, right ?
And will that not require an unsafe kernel ?
After resetting, then I suppose I need to install an original kernel again, and will that not make the counter go to 1 ?
Any other ideas ?
Regards
Morten
can you be little clear....
no network or no data (internet) on your current network
1: do you have a locked phone or unlocked. [carrier locked when new]
2: no network will be no signals at all, no phone call....
3: no data will be you cant browse, send receve emails
4: counter can be fixed easy as now your on ics
Hi,
I got the same problem but different scenario
atifsh said:
can you be little clear....
no network or no data (internet) on your current network
1: do you have a locked phone or unlocked. [carrier locked when new]
2: no network will be no signals at all, no phone call....
3: no data will be you cant browse, send receve emails
4: counter can be fixed easy as now your on ics
Click to expand...
Click to collapse
1. my phone is unlocked(international).
2. signal show full, but no phone call
3. I don't use data, but wifi, and no problem with wifi.
Well, this : not registered on network only happen if phone idle for more than 3hrs, meaning phone just work normally if I don't let it idle for long time. This very frustrating as every morning after wake up I have to switch between airplane mode for phone working again.
Greatly appreciated for your help
Thanks in advance
P/s: currently on Slim rom(cm9). But have tried almost all custom rom found in xda, problem still exist. Even try to change CSC to my current country( Thailand) on stock DL7( included Thailand region), no luck. APN setting also change to default network provider.
Mobile network problem
Hi.
Please see my answers below
1: do you have a locked phone or unlocked. [carrier locked when new]
The phone worked before, and was not locked, but as I send a command to the phone, could I have locked it ? How can I check that ? And it does not give me any warning when I start the phone up.
When I try to make a call, it right away says: Dialling ...Call ended.
2: no network will be no signals at all, no phone call....
No mobile network. It is ONLY a problem with phone calls and reciving calls.
I have plenty of signal
3: no data will be you cant browse, send receve emails
Data is right now not working, WiFi works.
I cant get correct APN settings, as my provider sends this as system configuration to the phone, but cant recive it.
3A: My provided is named 3 Oister, and normally this provider is listed under Network operators. On this phone it is NOT listed. 3 Oister is using network of 3, and only network of 3 is listed.
If I pull down the menu from the topbar on the phone, it actually says 3 Oister, but 3 Oister is not listed under Network Operators.
On my other SG2, 3 Oister is listed in Topbar and under Network Operators.
I bought a new SG2 as well, and we are 2 persons using SG2 here.
4: counter can be fixed easy as now your on ics
How ? Can I do that without rooting and install different firmware ?
I do run ICS ver 4.03, updated by Kies.
In worst case, I will send the phone in for repair, but for sure, needs the counter reset.
Regards
Morten
Put a new firmware in the phone then probably wrong modem and CSC for your location .
Chinese sim unlikely to work 4000 miles away but that is easy to swap sim .
Rom counter for ICS use the search tool for the relevant post .
jje
Mobile network problem
Hi
Please find answers below:
Put a new firmware in the phone then probably wrong modem and CSC for your location .
As my counter says 10, you can see, I have tried this several times, and its also written in my first post.
Please send the code for check of CSC and changing CSC. As I remember it is set to be NEE.
Chinese sim unlikely to work 4000 miles away but that is easy to swap sim .
Chinese SIM works all over the world, as long as Roaming is allowed. And it works in the other phone. Now I have the Denmark SIM in, and same problem. Yes, I did close down the phone, changed SIM and started the phone again. Exactly SAME problem.
Rom counter for ICS use the search tool for the relevant post .
Would be nice to have the info written here instead.
regards
Morten
SG2Denmark said:
Hi
Please find answers below:
Put a new firmware in the phone then probably wrong modem and CSC for your location .
As my counter says 10, you can see, I have tried this several times, and its also written in my first post.
Please send the code for check of CSC and changing CSC. As I remember it is set to be NEE.
Chinese sim unlikely to work 4000 miles away but that is easy to swap sim .
Chinese SIM works all over the world, as long as Roaming is allowed. And it works in the other phone. Now I have the Denmark SIM in, and same problem. Yes, I did close down the phone, changed SIM and started the phone again. Exactly SAME problem.
Sim CSC Modem . Firmware .
Then your answer is hardware fault if above are ruled out as not a problem.
Rom counter for ICS use the search tool for the relevant post .
Would be nice to have the info written here instead.
Sorry i refuse point blank to search for someone else .
Neither do i have the relevant post bookmarked otherwise it would have been posted .
jje
Click to expand...
Click to collapse
SG2Denmark said:
Hi.
Please see my answers below
Regards
Morten
Click to expand...
Click to collapse
try this before you send for repair.......
get this stock for your network
http://www.hotfile.com/dl/149692036/21dfd27/I9100XXLPQ_I9100HTDLP3_HTD.zip.html
1: forget all your idea's do exact as i say
2: remove your sdcard
3: using cwm format system, cache, data, sdcard [system is a must]
4: remove battery / insert back goto download mode
5: flash the ROM you downloded using odin, after restart dont do any restores
6: wait for few minutes now dial this *2767*3855# [important]
dont restore any backups including titanium stuff.
if your phone works now put your sdcard back and do whatever now you want.
---------- Post added at 04:29 PM ---------- Previous post was at 04:24 PM ----------
Saisuay said:
Hi,
I got the same problem but different scenario
1. my phone is unlocked(international).
2. signal show full, but no phone call
3. I don't use data, but wifi, and no problem with wifi.
Well, this : not registered on network only happen if phone idle for more than 3hrs, meaning phone just work normally if I don't let it idle for long time. This very frustrating as every morning after wake up I have to switch between airplane mode for phone working again.
Greatly appreciated for your help
Thanks in advance
P/s: currently on Slim rom(cm9). But have tried almost all custom rom found in xda, problem still exist. Even try to change CSC to my current country( Thailand) on stock DL7( included Thailand region), no luck. APN setting also change to default network provider.
Click to expand...
Click to collapse
next time start your own thread........ this time im helping
do as i posted for the OP but instead of his firmware download your country specific firmware.
seems as a modem issue but can be sim related.
Mobile network problem
Hi again
Followed the guide very detailed
3: using cwm format system, cache, data, sdcard [system is a must]
Wiped all data in System and also Wiped Cache, using:
Root the Samsung Galaxy S2 GT-I9100 running XXLPQ firmware and install ClockworkMod Recovery: CF-Root-SGS2_XX_XEO_LPQ-v5.3-CWM5.tar
Done with Super User Granted.
4: remove battery / insert back goto download mode
Done
5: flash the ROM you downloded using odin, after restart dont do any restores
Flashed with Odin 1.85 in PDA: I9100XXLPQ_I9100HTDLP3_I9100NELP2_HOME.tar.md5
6: wait for few minutes now dial this *2767*3855# [important]
Done. Phone shows Factory Reset in big letters
dont restore any backups including titanium stuff.
Nothing restored.
Booted up, and automatic installed APK's
Same problem.
Only difference is that now the counter says 11 counts
But thanks for a detailed and well told possibility.
As I see it, the problem is connected to the standard the phone connects to the Mobile grid. As I told earlier, I made a stupid thing. I send a command with *#xxxx* in the phone, and I cant remember what code, and I did not save the page on the internet. I really think the problem is about a standard. That the phone is setup to a standard that the 3G net is not using in Denmark.
I can dump logs etc, if anyone can help. But I need to know how.
Regards
Morten
buddy your problem was.... network right? is it working now?
forget counter it will be fixed....later using triangle away with ics bootloader
---------- Post added at 12:06 AM ---------- Previous post was at 12:01 AM ----------
if your phone now works fine with calls send and recieve, manually add the apn to get 3G.
Mobile network problem
Hi
Nope. Did not solve the problem.
Just ran Triangle away, and moved the Firmware: I9100XXLPQ_I9100HTDLP3_I9100NELP2_HOME.tar.md5 to the SD card.
Will try now to install it by CWM
And then I give up. Will try to send it for repair ..... really a shame, as I really would have liked to solve it here
Cheers
Morten
Mobile network problem
Hi Buddy
It finds a lot of Networks, but cant connect to any of them
3 networks with 3G and 4 with 2 G
But not the Mobile network I need to connect to> Oister 3
My other SG2 finds that network without any problem
Cheers
Morten
I had the same problem too. At first I tought it was a rom issue, but it wasn't actually. I turned my phone off and removed and placed back my sim card and it worked.
Mobile network problem
Finished programming original firmware using CMW as source for Odin, after counter was reset to 0, and the pnone status is the same as before, but counter is 0.
So will try to send it in for repair.
Thanks to u all.
And SIM card has been removed several times, even tried with a different.
No luck at all
Cheers, and thanks again
Morten
Did you ever get to the bottom of this?
I've been using my phone in Brazil and now i'm in the UK, it's doing exactly as you describe.
...
How would you go about checking these?
Escy said:
How would you go about checking these?
Click to expand...
Click to collapse
Compare the IMEI that displays when you type *#06# to the IMEI printed on the label under your battery. They should be the same.
For your own sake, do NOT post what the IMEI under the battery actually is, whether it's the same as what's displayed when you dial *#06# or not.
As for checking IMEI blocking by the carrier, that should be obvious. Call your carrier.
Hi XDA ,
Am new in the Forum & First of all thanks to all of you for helping the forum and people. I'm having difficulties and I cant seem to find the way to fix this(its been 2 weeks)
My problem is the following: I have a Samsung Galaxy Note 3 details:
software version: N900PVPUBMI3
hardware version N900P.00
Status: network: Digital roaming
mobile network type CDMA-AxRTT
Android 4.4.2
KERNEL:[email protected]#1
A friend bought me this phone and called my carrier METROPCS and made them set up the phone so I could use it. they asked him for imei and sim number. He was able to use the phone and 4GLTE(he was doing this to verify it was unlocked) later on he gave me the phone and I had to do the same procedure he did but first I did a factory data reset.
After it I wasn't able to set it up again.
I've noticed that APN SETTINGS has disappeared from the menu, cant search for networks, when I load IMEI it no longer shows the imei but it shows MEID B0000000 and besides all of this I have a message that says SIM CARD INVALID.(but the sim card works perfectly on my other phone)
I will all my life appreciate if you help me with this matter please!
PS. phone is rooted as far as I know(root check on Google play store said it was)
Sir,
Please wait until mods will move this thread to the device specific forum for more relevant answers.
Stand by
Good luck
XDAGeorge305 said:
Hi XDA ,
Am new in the Forum & First of all thanks to all of you for helping the forum and people. I'm having difficulties and I cant seem to find the way to fix this(its been 2 weeks)
My problem is the following: I have a Samsung Galaxy Note 3 details:
software version: N900PVPUBMI3
hardware version N900P.00
Status: network: Digital roaming
mobile network type CDMA-AxRTT
Android 4.4.2
KERNEL:[email protected]#1
A friend bought me this phone and called my carrier METROPCS and made them set up the phone so I could use it. they asked him for imei and sim number. He was able to use the phone and 4GLTE(he was doing this to verify it was unlocked) later on he gave me the phone and I had to do the same procedure he did but first I did a factory data reset.
After it I wasn't able to set it up again.
I've noticed that APN SETTINGS has disappeared from the menu, cant search for networks, when I load IMEI it no longer shows the imei but it shows MEID B0000000 and besides all of this I have a message that says SIM CARD INVALID.(but the sim card works perfectly on my other phone)
I will all my life appreciate if you help me with this matter please!
PS. phone is rooted as far as I know(root check on Google play store said it was)
Click to expand...
Click to collapse
You might try installing this app it find/gives all the hidden info on your device http://forum.xda-developers.com/not.../app-one-click-hotspot-enabler-menus-t2816159 it will give you APN's MEID AND IMEI . All you have to do is download to your PC, it my download as a zip file. Just use 7zip and rename it to an apk, then copy and paste it to your internal sd card via your charging cable. Then click on apk and install. Enjoy !!!
BTW your MEID is on a label under the battery !!!
jimzweb1 said:
You might try installing this app it find/gives all the hidden info on your device http://forum.xda-developers.com/not.../app-one-click-hotspot-enabler-menus-t2816159 it will give you APN's MEID AND IMEI . All you have to do is download to your PC, it my download as a zip file. Just use 7zip and rename it to an apk, then copy and paste it to your internal sd card via your charging cable. Then click on apk and install. Enjoy !!!
BTW your MEID is on a label under the battery !!!
Click to expand...
Click to collapse
Hi Jim/XDA
I'm still not able to connect to the network. Regarding the IMEI on the back part i know its there however what im saying is that im not able to see my imei through command when i dial *#06#
i as well had this errors today when i woke up:
: LTE:ESM-x EMM-14(ive seen this error when this issue started but it dissapeared and it came back know)
data roaming: you have lost data connectivity because you left your home network with data roaming turned off.
On mobile networks i remember i use to be able to select many(GSM,CDMA,etc) now in network mode i only see 2 options LTE/CDMA,CDMA. Currently LTE/CDMA is selected and if you just look at the network mode option without actually opening it it shows CDMA/LTE/EVDO.
Also when i opened the SCRTN it shows on black screen.
I tried to do some minor changes on Galaxy tools like the SIM UICC UNLOCK all mps,sales,default code on XAS. Factory & keystring ON. MSL/SPC show 222222.
After i did SIM UICC UNLOCK and restarted phone know took away all errors but i see the signal bars faded out and with a little red x on top of it. I've read the manual but im still wondering if there might still be things to set on a particular way that are not specified on it Can you please help me set this up properly?
XDAGeorge305 said:
Hi Jim/XDA
I'm still not able to connect to the network. Regarding the IMEI on the back part i know its there however what im saying is that im not able to see my imei through command when i dial *#06#
i as well had this errors today when i woke up:
: LTE:ESM-x EMM-14(ive seen this error when this issue started but it dissapeared and it came back know)
data roaming: you have lost data connectivity because you left your home network with data roaming turned off.
On mobile networks i remember i use to be able to select many(GSM,CDMA,etc) now in network mode i only see 2 options LTE/CDMA,CDMA. Currently LTE/CDMA is selected and if you just look at the network mode option without actually opening it it shows CDMA/LTE/EVDO.
Also when i opened the SCRTN it shows on black screen.
I tried to do some minor changes on Galaxy tools like the SIM UICC UNLOCK all mps,sales,default code on XAS. Factory & keystring ON. MSL/SPC show 222222.
After i did SIM UICC UNLOCK and restarted phone know took away all errors but i see the signal bars faded out and with a little red x on top of it. I've read the manual but im still wondering if there might still be things to set on a particular way that are not specified on it Can you please help me set this up properly?
Click to expand...
Click to collapse
Is this a Sprint variant? If so, you shouldn't have factory reset the phone. It looked like the phone was previously flashed to MetroPCS and by resetting the phone, it removed all the carrier data.
You will have to reflash the phone to get it working again.
nature954 said:
Is this a Sprint variant? If so, you shouldn't have factory reset the phone. It looked like the phone was previously flashed to MetroPCS and by resetting the phone, it removed all the carrier data.
You will have to reflash the phone to get it working again.
Click to expand...
Click to collapse
Is there a tutorial i could follow here ?
I greatly appreciate your help,
Regards
George
Hey guys, for those who need to edit an APN (Access Point Names), there is a little secret.
Go Settings, and scroll down the list. You will find a search box. Type there Access Piont Names and here it is.
The steps above are neccesary, since APN setting is hidden.