Hi, I was trying to use Flash tool and Don't know what happend but My Phone is completely DEAD right now even power button is also not working no screen is there (just blank phone).
I am having UMI X2 2GB rom, 32 gb internal memory, 1.5 GHZ (MT6589T) Model.
I tried to use SP Flash tool to recover my phone. Firstly I tried to format the phone, After that I tried to run the correct scatter file for MT6589 (from one of the ROM Posted under UMI-X2).
Drivers for the SP Flash tool is loaded correctly (into my Windows 8 Pc). I was previosly getting error as follow : SP FLASH TOOL ERROR: (8200)
[Platform Error] The load and target are inconsistent!
Now, after searching a lot I found that its something wrong with SP Flash tool version.
So I downloaded SP Flash Tool V3.1304.O.sn119 version. After that I am trying to "Download" the rom (with the correct scatter file for my ROM). but its only showing me RED Bar (with 100%) and after that it does nothing. Its neither showing me any error nor its continuing the process.
I am in serious problem here. Please help me out.
Thanks in advance!
- Umang
umang_nine said:
Now, after searching a lot I found that its something wrong with SP Flash tool version.
So I downloaded SP Flash Tool V3.1304.O.sn119 version. After that I am trying to "Download" the rom (with the correct scatter file for my ROM). but its only showing me RED Bar (with 100%) and after that it does nothing. Its neither showing me any error nor its continuing the process.
I am in serious problem here. Please help me out.
Click to expand...
Click to collapse
Try this version of :
SP Flash Tool
October Official Rom
USB Drivers (if needed)
Works for me.
Necro thread...
I have the same issue.
A couple of days ago the phone just started turning off / locking up when off, and having great difficulty tuning on... i.e. pulling out the battery for a minute or a few times.
Now the phone won't turn on at all. They only sign of life is the charging animation when you plug it in.
Prior to all this, there appeared a window in Chinese with some options. my GF (who's phone it is) just pressed something, no idea what. But she said something about 'drawing on the screen'??? sound like something locked up and the previous frame wasn't deleted from the frame buffer before redrawing the new one... I have no idea.
Anyway, I tried going into recovery to see if there was anything I could do there, unfortunately everything was in Chinese, so not much help. for some reason now, the recovery isn't even working.
Now I can connect to the phone via SPflash, but I get the above response: '[Platform Error] The load and target are inconsistent!'
Some other ROMs I tried give me this response:
'The load to be downloaded is for MT6589;
The target platform is MT6582_S00'
Which is quite suspicious.
Any ideas?
Thanks
hisense HS-U980 bricked....
hi,i have the smartphone hisense hs-u980 with mt6589 or mt6589t, i dont understand.... so, i briched with sp.flash tool and now is ompletly dead,,, can i have ur help-sipport please?
thank u very much
Hs-u980 complete dead/bricked
carretto76 said:
hi,i have the smartphone hisense hs-u980 with mt6589 or mt6589t, i dont understand.... so, i briched with sp.flash tool and now is ompletly dead,,, can i have ur help-sipport please?
thank u very much
Click to expand...
Click to collapse
i have ur same phone and i have ur same problem,my pkone is dead later flash any wrong miui rom from cwm recovery and now is dead,i dont have any idea where is original firmware for sp.flash tool or other how piranha box,please,anyone can please me??? THANK U for read!!!!
I have the same Problem. So frustrating men. If anyone finds a solucion please email me [email protected] ...
SP FLASH TOOL ERROR: (8200)
As i connect my phone it disconnects after 2 seconds..
Please give me a site to download scatter file for my micromax a 310
Hello, I bought a lenovo s820 from aliexpress (im from romania) and i noticed after a few mins of use that 3G data won't work. Our carriers have wcdma 900/2100 and the phone specifies that it supports wcdma2100. I thought maybe the CN version (china) won't work so I found a tutorial how to flash the ROW version (rest of world). It succesfuly flashed and now my phone won't turn on. Device manager detects it as MTK USB Port but nothing. When I try to flash other firmwares of recoveries with SP Flash tool I get the get dram error.
Is there anything left to do or did I ruin this phone? I find it weird that it's still detected by PC so I hope there's still a chance.
Please help, otherwise I'm seriously screwed.
NEW UPDATE: i found a random mt6589 preloader, and i remembered i have my scatter file from when the phone worked (if only i had backuped the whole phone...) so after i select the original scatter and that random preloader i've got from the internet, the phone starts but only shows this: tool dl image fail and uboot is blocking by dl info
artanix said:
Hello, I bought a lenovo s820 from aliexpress (im from romania) and i noticed after a few mins of use that 3G data won't work. Our carriers have wcdma 900/2100 and the phone specifies that it supports wcdma2100. I thought maybe the CN version (china) won't work so I found a tutorial how to flash the ROW version (rest of world). It succesfuly flashed and now my phone won't turn on. Device manager detects it as MTK USB Port but nothing. When I try to flash other firmwares of recoveries with SP Flash tool I get the get dram error.
Is there anything left to do or did I ruin this phone? I find it weird that it's still detected by PC so I hope there's still a chance.
Please help, otherwise I'm seriously screwed.
NEW UPDATE: i found a random mt6589 preloader, and i remembered i have my scatter file from when the phone worked (if only i had backuped the whole phone...) so after i select the original scatter and that random preloader i've got from the internet, the phone starts but only shows this: tool dl image fail and uboot is blocking by dl info
Click to expand...
Click to collapse
it because when you flash ROM using sp flash tool, you don't tick DA DL ALL with Checksum option on the right upper. that why you got that error. try re flash but don't forget to tick the option
artanix said:
Hello, I bought a lenovo s820 from aliexpress (im from romania) and i noticed after a few mins of use that 3G data won't work. Our carriers have wcdma 900/2100 and the phone specifies that it supports wcdma2100. I thought maybe the CN version (china) won't work so I found a tutorial how to flash the ROW version (rest of world). It succesfuly flashed and now my phone won't turn on. Device manager detects it as MTK USB Port but nothing. When I try to flash other firmwares of recoveries with SP Flash tool I get the get dram error.
Is there anything left to do or did I ruin this phone? I find it weird that it's still detected by PC so I hope there's still a chance.
Please help, otherwise I'm seriously screwed.
NEW UPDATE: i found a random mt6589 preloader, and i remembered i have my scatter file from when the phone worked (if only i had backuped the whole phone...) so after i select the original scatter and that random preloader i've got from the internet, the phone starts but only shows this: tool dl image fail and uboot is blocking by dl info
Click to expand...
Click to collapse
I've flashed my Lenovo S820 CN 4g version with S820_ROW_S108_130603 firmware, using SP_Flash_Tool_v3.1316.0.150 on an Windows XP 32-bit machine, using a universal "hama" USB cable and i was stucked on a boot loop and got the same message like above. Then i've used same ROM, same tool on a Windows 7 machine and the genuine Lenovo USB cable and worked like a charm.
For those who get this message:
1) Don't use SP Flash Tool v3.xxx on Windows XP 32-bit.
2) Use the genuine Lenovo USB cable (the cable that came with your phone).
P.S. Sorry for my bad english! Take care!
Unpack the rom to a folder then unpack SPFT start SPFT, Select and load scatter file from rom folder, press download,Then connect the powered off V785 phone to the usb cable.
Original Stock rom
http://www.mediafire.com/download/hoaken3645l0r3c/ot-V785-2AVDEG1_Original_SPFT_ROM_by_bRkA.7z
flash tool
http://www.mediafire.com/download/q5zrm94o4in1ga8/SP-Flash-Tool-v3.1344.0.212.7z
bricked my vodafone 785
hello...do i have a hard brick {vodafone smart mini 4:crying::crying:}?i flashed wrong boot image then i formatted with sp tools by mistake(i know,dump hey) so now i think my backup is corrupt,most files short...so can u pliz upload a sp flash tool backup plllizz i beg u...or preloader file....thanx
MTK Flash Tool dump of Alcatel OneTouch 4033 ...........Just build prop edit it back to vodafone 785 once flashed if it bugs you. <<<< What is the format of this file ??? OK ARC compressed managed it...
I've got bricked Vodafone 785 and I think only spflash will help me but I don't have any stock rom
Please help ?
EDIT:
Someone did format phone .... sp flash works but only Alcatel popc3 logo and recovery is avaible... after spflash I have broken partition table .... I don't know what to do :/
H_C_K said:
Someone did format phone .... sp flash works but only Alcatel popc3 logo and recovery is avaible... after spflash I have broken partition table .... I don't know what to do :/
Click to expand...
Click to collapse
Check it out:
gsmpro.com.pl/serwis/item/190-vodafone-785-smart-4-mini-naprawa-firmware-imei-polskie-menu-usuwanie-blokad-root
HEELP!!!
I was trying to put the nav bar (qemu.hw.mainkeys=0) in the build.prop file and rebooted the phone and iit is boot loop. What can I do? I haven´t CWM because I didnt find it, and I dont find the drivers of the phone.
Please help me it is a new phone ( 2 weeks) and my mum wont ever buy me a smartphone anymore .:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Is there a way to get fota updates for this device as a regular download through pc? If so, could someone please point me to the location? I need the latest update zip for this phone (i think from nov/dec 14) in german.
HI, I followed the instructions above, but I can't get the o.s. Just have the clockworkmod recovery now, so the vodafone 785 doesn't start. I also tried to put the backup folder into my extsd but I'm not able to restore the smartphone from the backup you uploaded (from cwm recovery), because it says "no file". Please can you help me?
Does this work? Anyone confirm?
CWM Backup of Vodafone Smart 4 Mini stock rom with modded CWM recovery, Thanks to fulgerul46 for posting.
Link
---------------------------------------------------------
Click to expand...
Click to collapse
Hello guys.
I really need this file to restore my phone can someone reupload it somewhere or pm me a link?
Thanks in advance.
I have a new vodafone smart 4 mini UK PAYG with 4.4.2
and another with 4.2.2.
Cant get it to update to same as other one ie 4.2.2 to 4.4.2
using OTA as both say they are uptodate.
Am newbie.
I guess copy firmware from one to the other somehow
and pass a copy to stock firmware archives.
Phone is DEAD. Don't Flash Flashtool File...
Can anyone explain what is to be done is phone is dead ? Totally confused !
I create fw 4 you
ex.ua/163049604103
Anyone? VF785 stock rom?
suslix78 said:
I create fw 4 you
ex.ua/163049604103
Click to expand...
Click to collapse
Where is the file please I need it.
CWM Backup of Vodafone Smart 4 Mini stock rom with modded CWM recovery, Thanks to fu
" CWM Backup of Vodafone Smart 4 Mini stock rom with modded CWM recovery, Thanks to fulgerul46 for posting."
Any chance we can get a re-up of this ROM, link is dead. Thanks!
Vodafone smart 4 mini doesn't start
Hi
I bought brand new vodafone smart 4 mini and first I did was root to unlock phone, next a very stupid idea came to my had to update software, after that my phone worked terreble, so another stupid idea came to my head to flash oryginal ROM, I downloaded rom, SPFlash tool , load scatter file and pressed download, everything looked good, it took about one minute and green circle ok at the end. I was verry happy, for couple seconds only, my brand new phone never started again. there was only short blink when I pressed power button , and then nothing. I've been trying to flash the phone many times after that with couple different ROM's but no succes. sometime phone doesn't even blink after flashing. Sometimes at the begining of flashing there is mesage "no partition table" or memory error. Please somebody help me, I'm loosing hope.
I think the only good news is that the "Media Tek PreLoader USB VCOM" still works, and looks like phone cooperates with the tool, maybe I should use different tool, or test phone first with some tool, or create partitin table ?
wigor75 said:
Hi
I bought brand new vodafone smart 4 mini and first I did was root to unlock phone, next a very stupid idea came to my had to update software, after that my phone worked terreble, so another stupid idea came to my head to flash oryginal ROM, I downloaded rom, SPFlash tool , load scatter file and pressed download, everything looked good, it took about one minute and green circle ok at the end. I was verry happy, for couple seconds only, my brand new phone never started again. there was only short blink when I pressed power button , and then nothing. I've been trying to flash the phone many times after that with couple different ROM's but no succes. sometime phone doesn't even blink after flashing. Sometimes at the begining of flashing there is mesage "no partition table" or memory error. Please somebody help me, I'm loosing hope.
I think the only good news is that the "Media Tek PreLoader USB VCOM" still works, and looks like phone cooperates with the tool, maybe I should use different tool, or test phone first with some tool, or create partitin table ?
Click to expand...
Click to collapse
somebody please help
there are away by sd card if anyone can plz pm me umor.raihan skype
Thank you very much, it unbrick the phone and add Arabic language
there is Arabic language in it .
this is not working for me what exactly is supposed to happen when you plug in phone?
this was my first time trying to install a new firmware on this phone
the phone was stuck on the huwawei logo I googled and found I have to flash it
I downloaded a firmware
and flashed it using SPFLAH tool Firmware upgrade option
Now the phone won't event start or get recognized by the computer
any help?
I forgot to mention that when I first chose the option to DOWNLOAD only it gave me an error like PMT changed and must be downloaded or something like that
so I changed it to Firmware upgrade
Hello!
A friend gave me his cloned samsung s5 sm-g600v (MTK Device) and it was showing him some errors that he couldn't use the phone at all ex: com.android.xx has stopped ..
He told me to flash it
I searched for a firmware and i found many..
Downloaded Mt6275 because that's what it showed on Sp Flash tool and I tried to flash it
An error message pop up says : brom error : s_not_enough_storage_space (1011)
I had to untick USERDATA from Sp flash tool and try to flash and it showed me : PMT changed for the rom it must be downloaded..
Now I faced this problem before and the solution was to format the phone from the format section in Sp Flash Tool and Then go to download and flash the device
But it kept showing the same errors
In Format All+ Download: not storage space available
Download : Pmt changed for the rom
I don't know if the rom is not suitable for the device
But now the device won't power on at all
It only displays the charging battery when plugged in
The firmware that I tested were downloaded from Google Drive and other links provided in Youtube Videos or Blogs
Can someone help me flashing it? I mean if you can provide me with the correct firmware or the solution please am stuck..