I just got a samsing galaxy s2 i9100. It does not connect to my pc (device descriptor failed) and it has been soft bricked i have tried to install another firmware but it gives me error singnature verification fail. Please help me My android recovery system is 3e. Thank u.
Did you already have a custom firmware on? I managed to get around my soft brick by loading on the stock rom
redukdaz said:
Did you already have a custom firmware on? I managed to get around my soft brick by loading on the stock rom
Click to expand...
Click to collapse
no I had the original 4.4.2 plus how did you connect your s2 to pc
Look at my posts here - https://forum.xda-developers.com/galaxy-s2/help/sgsii-bootloader-t3686898
Thanks guys, I updated the operator firmware to the latest one I could find, it now boots up thankfully
I'm trying to install the custom recovery trwp on it via odin, but for some reason it doesn't work, could you point me in the right direction? I've looked at so many posts I'm googly eyed now :cyclops:
Thankyou :good:
098765 said:
no I had the original 4.4.2 plus how did you connect your s2 to pc
Click to expand...
Click to collapse
toy_story said:
Look at my posts here - https://forum.xda-developers.com/galaxy-s2/help/sgsii-bootloader-t3686898
Click to expand...
Click to collapse
Related
Hi i just got a Galaxy ace and i tried to install clockwork mod it "installed" then i rebooted the phone it worked normal THEN i went to recovery mod but it was not clockwork i tried to install cyanogenmod and it said installation aborted i tried to reboot the phone and well it got stuck on the screen that says: Samsung Galaxy Ace S5830M.
I tried factory reset and nothing is there any solution to this?
Flash Stock Firmware via Odin
There's all information given at the Top in FAQ Thread
iamareebjamal said:
Flash Stock Firmware via Odin
There's all information given at the Top in FAQ Thread
Click to expand...
Click to collapse
That's the problem i dont know how to use any of them programs :silly:
smokealbertobi said:
That's the problem i dont know how to use any of them programs :silly:
Click to expand...
Click to collapse
Read This :- http://forum.xda-developers.com/showthread.php?t=1840645
S H A D Y said:
Read This :- http://forum.xda-developers.com/showthread.php?t=1840645
Click to expand...
Click to collapse
Oh man thanks batman!!
I must have messed up during root, and my wifi wasnt turning on so I tried to flash stock rom, and now it wont boot. It boots up to;
Image too large!! W:1080 H:1920
display image fail
Secure fail: kernel
I've tried flashing several roms, yet no luck and I'm sure people have fixed this issue with their phones before. Some please help if they can
fogtint said:
I must have messed up during root, and my wifi wasnt turning on so I tried to flash stock rom, and now it wont boot. It boots up to;
Image too large!! W:1080 H:1920
display image fail
Secure fail: kernel
I've tried flashing several roms, yet no luck and I'm sure people have fixed this issue with their phones before. Some please help if they can
Click to expand...
Click to collapse
Are you sure you flash the correct firmware?..The secure kernel fail happen when you try to downgrading..
Carnage said:
Are you sure you flash the correct firmware?..The secure kernel fail happen when you try to downgrading..
Click to expand...
Click to collapse
My Mega was on 4.2.2 before I even thought about rooting it. The Samsung mega only has 4.2.2 firmware does it not? If it doesn't where do I find the lower firmwares?
This issue won't allow me to enter recovery mode. I can only enter download mode or ODIN is what its referred to.
fogtint said:
My Mega was on 4.2.2 before I even thought about rooting it. The Samsung mega only has 4.2.2 firmware does it not? If it doesn't where do I find the lower firmwares?
Click to expand...
Click to collapse
Yup,the mega still on 4.2.2 but some of newer firmwares got knox on it...try search the firmwares on SamMobile..or maybe @starmaster10 can help.
Edit:you cannot downgrade if you knox tripped.Choose the exact firmware you running before.
Carnage said:
Yup,the mega still on 4.2.2 but some of newer firmwares got knox on it...try search the firmwares on SamMobile..or maybe @starmaster10 can help.
Edit:you cannot downgrade if you knox tripped.Choose the exact firmware you running before.
Click to expand...
Click to collapse
I've spent a good part of the day looking for solutions and downloads and whatnot but still nothing. Am I screwed?
fogtint said:
I've spent a good part of the day looking for solutions and downloads and whatnot but still nothing. Am I screwed?
Click to expand...
Click to collapse
Try this http://forum.xda-developers.com/showthread.php?t=2461203
Carnage said:
Try this http://forum.xda-developers.com/showthread.php?t=2461203
Click to expand...
Click to collapse
I have a sd card for the phone but since I have this issue I can't enter usb storage mode so I can't put any files on it. I tried flashing all the firmwares with ODIN but I still end up with the secure fail: kernel error.
fogtint said:
I have a sd card for the phone but since I have this issue I can't enter usb storage mode so I can't put any files on it. I tried flashing all the firmwares with ODIN but I still end up with the secure fail: kernel error.
Click to expand...
Click to collapse
I GOT MY PHONE BACK!!!!!!!! THANK YOU SO MUCH OMFG.. ONE THING THOUGH, WIFI ISNT WORKING..sorry for caps i spent 12hours straight looking for a solution
fogtint said:
I GOT MY PHONE BACK!!!!!!!! THANK YOU SO MUCH OMFG.. ONE THING THOUGH, WIFI ISNT WORKING..sorry for caps i spent 12hours straight looking for a solution
Click to expand...
Click to collapse
No worries man.glad you fix it by yourself.
Carnage said:
No worries man.glad you fix it by yourself.
Click to expand...
Click to collapse
Re-flashed a rom I found in the thread you sent, and wifi is working fine. Thanks again. :good:
fogtint said:
Re-flashed a rom I found in the thread you sent, and wifi is working fine. Thanks again. :good:
Click to expand...
Click to collapse
Can you tell me which rom you flash to have the wifi working? I had the same wifi problme before and ends up have to flash with custom rom cm11.
Thx
bigboy0723 said:
Can you tell me which rom you flash to have the wifi working? I had the same wifi problme before and ends up have to flash with custom rom cm11.
Thx
Click to expand...
Click to collapse
ROOT_JDQ39.I527MVLUBNA3 <---thats what it was called. You can search in the thread for the link
bigboy0723 said:
Can you tell me which rom you flash to have the wifi working? I had the same wifi problme before and ends up have to flash with custom rom cm11.
Thx
Click to expand...
Click to collapse
I beleive this is the post for that rom here and you might have ti take the md5 ext. off the end of the file if it does not work..and this rom is pre-rooted also.
starmaster10 said:
I beleive this is the post for that rom here and you might have ti take the md5 ext. off the end of the file if it does not work..and this rom is pre-rooted also.
Click to expand...
Click to collapse
Yep, that's what I did. Thanks again for all your help.
i527 firmware
I want to post a sticky with unbrick instructions.
hello every one ,,,,,,
i have i527m for unlock ,, so i need to root this first i try wit kingo root etc but no luck , also super user new verion ,,
then i flash my phone with pre rooted file ROOT_JDQ39.I527MVLUBNA3 this file ,
after that now my phone dont have imei ,, imei \null null ,, basband unkown ,, ,,
and it showing 4.2.2 verion in side ,
now i cant find the offical file of 4.4.2 wich was inside before ,,
i try with i527m file like bell file etc ,, but i cant flash using odin , its failed ,,
also i try with an other i527m file its flashed but after flash i got image size error \etc
any way come to the point , i alrady try with 4.4.2 and 4.4.4 wich is alrady post here by an indian guy ,he put lot off file but all are not working on my phone , with sd card methoot , i try but all firmware are failed ,,,,,
now i need 4.4.2 firmware plz any one give me link ,,,
i527m 4.4.2
thanx in adance
Hello,
My galaxy wont start.... :crying:
I have bootloop in galaxy s3 screen and CWM screen (it says CMW recovery 6.0.4.6 and then crashed back to Galaxy S3 logo)
I cant startup the phone anymore. CWM does not work as well. I cant get anywhere right now!?
Anyone know what the problem is?
Flahs Original ROM
It isn't a big problem. Download the latest Samsung Firmware from Sammobile and your Country. Than go to download mode and flash the Version. I hope you know how odin work
Tkkg1994 said:
It isn't a big problem. Download the latest Samsung Firmware from Sammobile and your Country. Than go to download mode and flash the Version. I hope you know how odin work
Click to expand...
Click to collapse
Thanks, will look there!
Now I have to look for Odin!
Link
want to have a link for it?
HTML:
http://www.chip.de/downloads/Odin3_12992520.html
Problem is solved with odin and original firmware.
Topic can be closed, thanks for the messages!
Sleehond said:
Problem is solved with odin and original firmware.
Topic can be closed, thanks for the messages!
Click to expand...
Click to collapse
Very good. Your welcome mate Please hit thanks if I helped you!!
Tkkg1994 said:
Very good. Your welcome mate Please hit thanks if I helped you!!
Click to expand...
Click to collapse
Well, I am afraid but i think you may need to flash your device with the appropriate Stock ROM. Try heading over the sammobile/firmware section and download the stock ROM and flash it over to your device with the help of ODIN it will start working fine ! :highfive:
I need help to unbrick my phone. Here are the details of my phone and things I did before it became useless.
- Version: Updated version of Samsung Galaxy S6 Edge Marshmallow Android 6.0.
- replaced its recovery with TWRP via odin (3.10.6)
- install a ROM with the use of TWRP recovery.
- After rooting my phone and flashing a new rom via TWRP, I can't use my phone's physical buttons.
I also tried full-wipe installation of Custom rom and I got the same issue. I tried restoring it to a stock rom, but it always says "Fail".
Do you guys have any suggestions how can I fix my phone?
Which rom did you flash?
What point in odin does it fail?
I take it you have G925F? Not G8.
Whats your region and what firmware did you try to flash (stock)
callumbr1 said:
Which rom did you flash?
What point in odin does it fail?
I take it you have G925F? Not G8.
Whats your region and what firmware did you try to flash (stock)
Click to expand...
Click to collapse
Thank you for your reply. Here are my answers:
-I flashed "CarHDRom" to my phone using TWRP 3.0.
- Yes, 825F is just a typo, G925F is the correct model name. I double checked it in the box.
- Philippines, and I already downloaded the firmware that you suggested in another post about softbricked g925F (G925FXXU3DPAD_G925FOXA3DPAD_XEU).
lexeroy said:
Thank you for your reply. Here are my answers:
-I flashed "CarHDRom" to my phone using TWRP 3.0.
- Yes, 825F is just a typo, G925F is the correct model name. I double checked it in the box.
- Philippines, and I already downloaded the firmware that you suggested in another post about softbricked g925F (G925FXXU3DPAD_G925FOXA3DPAD_XEU).
Click to expand...
Click to collapse
Have you flashed the stock firmware you just posted?
callumbr1 said:
Have you flashed the stock firmware you just posted?
Click to expand...
Click to collapse
Yes via Odin, and it always says:
NAND Write Start.
FAIL.
lexeroy said:
Yes via Odin, and it always says:
NAND Write Start.
FAIL.
Click to expand...
Click to collapse
I would first try with odin v 3.10.7 not 3.10.6.
Make sure you have origional cable and debug mode is on in dev options.
If this fails look for the firmware in the picture. Download and flash that.
Any problems let me know
callumbr1 said:
I would first try with odin v 3.10.7 not 3.10.6.
Make sure you have origional cable and debug mode is on in dev options.
If this fails look for the firmware in the picture. Download and flash that.
Any problems let me know
Click to expand...
Click to collapse
Still Fail after trying different original Samsung Cable. Please check my attachment.
By the way, where can I see that? Can you share the link for me?
lexeroy said:
Still Fail after trying different original Samsung Cable. Please check my attachment.
By the way, where can I see that? Can you share the link for me?
Click to expand...
Click to collapse
I will pm you the link.
Ohhhh thanks man! Finally this BTU firmware worked to my phone! ???
By the way, I'm going to flash a Custom rom here in my phone.. what recovery do you suggest?
lexeroy said:
By the way, I'm going to flash a Custom rom here in my phone.. what recovery do you suggest?
Click to expand...
Click to collapse
I suggest TWRP. Make a full Nandroid back up before just incase. But if anything goes wrong you can just flash that stock back to fix.
I would root first with cf autoroot.
Then flash your ROM.
Do a full wife when rom installer asks as this is safest way.
If it bootloops just wait.
Glad i can help
Well it looks like CarHDRom is not compatible with my phone. Tried flashing it twice and I waited for 30mins of booting but it doesn't continue.
lexeroy said:
Well it looks like CarHDRom is not compatible with my phone. Tried flashing it twice and I waited for 30mins of booting but it doesn't continue.
Click to expand...
Click to collapse
It is compatible im using it mate. Did you do a clean install? Wipe data when installer asks? My first boot took around 30 mims
30mins? Seriously?? Yeps.. I did a full wipe before booting with the CarHDRom.. is it the most stable TW based ROM now? ? thanks !
lexeroy said:
30mins? Seriously?? Yeps.. I did a full wipe before booting with the CarHDRom.. is it the most stable TW based ROM now? ? thanks !
Click to expand...
Click to collapse
Which kernel did you install when the installer asked you? Yeah id say its probably the most stable rom for s6 edge.
Did you do full wipe in aroma?
Hi there, yesterday I was trying to install some stuff with my gear s to work on non Samsung phone, but ended up breaking it. Can you guys please help me recover it again. I tried the official firmware from Sammobile and Odin failed.
counterzattack said:
Hi there, yesterday I was trying to install some stuff with my gear s to work on non Samsung phone, but ended up breaking it. Can you guys please help me recover it again. I tried the official firmware from Sammobile and Odin failed.
Click to expand...
Click to collapse
- Flash that one first ( ROM ) : http://www.mediafire.com/?pu44524rv2vn9st
- Then, flash that : http://www.mediafire.com/?patgdf2gpdxzkd8
If you can't flash the rom file(first link), try to flash the 2nd file then the Rom
Thank you so much life saver
counterzattack said:
Hi there, yesterday I was trying to install some stuff with my gear s to work on non Samsung phone, but ended up breaking it. Can you guys please help me recover it again. I tried the official firmware from Sammobile and Odin failed.
Click to expand...
Click to collapse
counterzattack said:
Thank you so much life saver
Click to expand...
Click to collapse
You're welcome , if you have a glitch ( screen do not respond ), do a wipe factory reset.
playnote said:
- Flash that one first ( ROM ) : http://www.mediafire.com/?pu44524rv2vn9st
- Then, flash that : http://www.mediafire.com/?patgdf2gpdxzkd8
If you can't flash the rom file(first link), try to flash the 2nd file then the Rom
Click to expand...
Click to collapse
Can you help me please how to do this ?
Hey there I don't have the watch anymore but you have to download Odin to flash these files to your watch. I can't help more sorry ;/