This LineageOS 14.1 ROM is built from source for Blu R1 HD.
Some features of this LineageOS 14 rom are:
- Hardware rendered LiveDisplay (no UI lag in night mode)
- Android security patches up to October
- Security hardened kernel (including BlueBorne bluetooth patches)
- Kernel patched for Nougat (Nougat compatible SELinux)
- No Chinese spyware
Credits:
zhaofengli (major thanks for getting the rom booting + hotspot/GPS fix, among other things!)
vampirefo
danielhk (GPS fix)
DeckerSu(Initial device tree, MTK patches)
Sources:
Code:
[URL=https://github.com/blumonks/android_device_blu_p6601]Device Tree[/URL]
[URL=https://github.com/blumonks/android_kernel_mediatek_mt6735]Kernel Source[/URL]
[URL=https://github.com/blumonks/android_p6601]Build Manifest[/URL]
[URL=https://github.com/blumonks/twrp_device_blu_p6601]Recovery device tree[/URL]
Downloads:
LineageOS 14.X Downloads
TWRP Recovery
Click to expand...
Click to collapse
Installation Guide:
1) Flash TWRP recovery (See downloads)
Code:
fastboot flash twrp-3.1.1-0-p6601.img
This TWRP recovery has a different device name than previous versions of TWRP.
2) Boot into recovery (Hold vol up when booting and use vol keys to select recovery)
3) If coming from a non lineageOS rom, please format system, data, and cache in recovery before flashing this rom. Otherwise stale files from previous roms may cause bugs.
5) Flash lineage rom
6) Flash gapps (obtain here: http://opengapps.org/)
Current bugs:
Camera does not work. It is still under active research and development.
Bluetooth
Github Issue Tracker (Please do not open duplicate issues)
Please note that support will be limited.
UPDATED BUILD 24 AUG 2020.
If anyone is still using this device, here is an updated build with the August 2020 Android Security Bulletin & all merged LineageOS changes since October 2017. MAKE SURE YOU FLASH USING THE TWRP IN THE ORIGINAL POST! You can flash over any builds in this thread, the camera still doesn't work and I have no interest in fixing it.
https://www.mediafire.com/file/dbdmk...p6601.zip/file
https://gofile.io/d/vTddMJ
Vulnerability said:
Nice! Can't wait to test it! Any screenshots?
Click to expand...
Click to collapse
It's the same as any other lineage rom. Updated OP.
How well does Bluetooth Audio work? Does it make you sound like a Chipmunk?
Is enforcing SELinux supported? Or only permissive?
EDIT: Don't worry I saw the issue tracker post
I'm gonna try this rom
It's nice to see development alive!!!
Hope you could a finally fix the broken camera
Does anyone know anything about the KRACK vulnerability?
zombie_ryushu said:
How well does Bluetooth Audio work? Does it make you sound like a Chipmunk?
Click to expand...
Click to collapse
I don't know, nor do I have the accessories to test it. I would appreciate if you could try it and report back.
zombie_ryushu said:
Does anyone know anything about the KRACK vulnerability?
Click to expand...
Click to collapse
Yes.. Please see download link for latest rom. It includes the KRACK security fixes from lineageOS.
jianC said:
I don't know, nor do I have the accessories to test it. I would appreciate if you could try it and report back.
Yes.. Please see download link for latest rom. It includes the KRACK security fixes from lineageOS.
Click to expand...
Click to collapse
Thanks for the updated version.
Urg, but I just finished downloading the original release
jianC said:
I don't know, nor do I have the accessories to test it. I would appreciate if you could try it and report back.
Yes.. Please see download link for latest rom. It includes the KRACK security fixes from lineageOS.
Click to expand...
Click to collapse
Does this fix also apply to the LineageOS 13.x Rom? I need the Front facing camera working, and that works under Marshmellow and not Nougat.
Just wanted to thank you for your hard work and dedication on this ROM project and wish you good luck with the camera as well.
Not that I find the camera on the R1 HD all that useful as it takes pretty lame photos, but the lack of camera is basically the only thing keeping me from ditching Blu software altogether.
I really hope you manage to get a 100% operational LineageOS for the R1 HD.
Yesterday I called Amazon and complained about the software that collected our personal information and data and submitted it to Blu headquarters in China. They said that I could return the phone for a full refund so at this point I am seriously contemplating doing that. The only problem is that I don't have a backup phone.
The lack of resources from MTK based processors is such a deal breaker. I was not aware it would be so difficult to get development going for it when I bought my phone last year.
Now I'm contemplating getting an used phone with better development support after I return my R1 HD.
I really wanted to wait until OnePlus released their new device with a better display and hopefully a near bezel less display and at least IP67 water resistance. That's the reason why I didn't go for the OP5. The upside-down screen was also another one.
If you could get the camera working in LOS than I'd hold on to my R1 HD for a a while longer. But I'm not keeping my hopes up... Just being realistic. Haha!
Thanks again!
Thanks for your support!
As of now, I've been studying the leaked MTK camera sources for other devices and using IDA to see what extra symbols and logic the stock libcameraservice.so and libcamera_client.so has. It appears that replacing these two libs was the key to fixing camera in cm-13 ports.
Thank you!
Oh, I didn't know camera support was fixed for CM 13 on the R1 HD. Maybe I didn't see it here. But I'd much rather have a non Blu version of Android with all security patches even if it's just on marshmallow.
Three days ago I just realized that Blu had a frigging app collecting my personal data and sending it back to China.
It had sent over 5.9MB of data since July 21st. I think it's a lot of data for text only transmissions.
Anyhow, I've been seeing people using Footej on other ROMs in which they could not get the camera working with stock camera app. Is that what you mean by getting the camera to work?
Stuck here guys!!!
Which recovery version do I have to install to properly flash this rom?
khyr said:
Stuck here guys!!!
Which recovery version do I have to install to properly flash this rom?
Click to expand...
Click to collapse
Dang! That's old! I guess devs should be more organized in doing a walk through with links to the files and recoveries needed to flash their awesome work.
Here's mine that I've just uploaded to zippy. I think it's the latest available and should be compatible with all ROMs.
Please report back with your findings and opinions on the ROM.
Please try to use both SIM cards to see if they work okay.
http://www8.zippyshare.com/d/p4HMiDRq/41954/R1_Port_3.1-TWRP.img
khyr said:
Stuck here guys!!!
Which recovery version do I have to install to properly flash this rom?
Click to expand...
Click to collapse
Which version of the ROM is installed on it now? Modified or stock? Which recovery is on the phone? Stock or TWRP?
I can't post pictures but it gives me an error saying that the package is for p6601 and the updated twrp image says device is Life_Max
frosted.efizzle said:
I can't post pictures but it gives me an error saying that the package is for p6601 and the updated twrp image says device is Life_Max
Click to expand...
Click to collapse
Did you download and flash the image I've just shared above?
AndroidBR said:
Did you download and flash the image I've just shared above?
Click to expand...
Click to collapse
Same error
With they recovery You provided above
Thanks for your support!
Related
Hi
After LeMax2 Project Treble port, I decide to bring up to our device too. Since I've x720 6/64 variant this project was possible to me tho due to QFIL tool in case of bricks, but wasn't need thanks for god.
Project Treble as Work in progress, please read the OP before flash/bla.
and let's the party begin. check sreenshots in "Screenshots" or in the second post.
READ ME FIRST:
it's a buggy rom: I don't care about that, since I put [WIP] that mean new fixes will coming up.
Respect works of devs because they spend time and energy to do these things.
I did not tolerate ETA.
Compatible Devices:
x720: yes.
x722: yes.
x727: yes.
How is possible:
click here.
How I done:
Porting patches of TWRP to our one that I will release one for us too.
Applying the kernel patch from LeMax2 one to mount vendor on ZL1.
Compile the whole rom with Project Treble flags in device tree and proprietary blobs.
Works
Audio.
ADB.
Bluetooth.
Camera.
Display.
Fingerprint.
Graphics: hwcomposer & gralloc.
Internal Storages.
Hardware navigation buttons.
LeEco Extras.
Lights.
NFC.
RIL
Sensors.
USSD Codes: seems works
Wifi.
Bugs
Tell us more, all credits goes to codeworkx fir his fixes and works .
Installation Guide:
Copy my unofficial los to internal storage
Download my own TWRP and flash it via fastboot.
Download the partition.zip from linked thread. credits: @shivatejapeddi
Flash the whole partition.zip (don't panic if give the error it's ordinary administration.)
Go back to Wipe->uncheck all partition except the vendor, tap swipe to wipe it then.
Optional: you can go to Mount to see if mounted.
Wipe: dalvik, cache, data and system.
Now flash the whole rom that will install the vendor.img automatically, reboot device once finish installing then.
Enjoy Project Treble.
TWRP
Click here.
Credits:
LePro3 Developers.
LeMax2 Developers, without them wasn't possible for the unsed partition.
Sources:
https://github.com/hak86
XDA:DevDB Information
Treble x72x, ROM for the LeEco Le Pro3
Contributors
haky 86
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.18.x
ROM Firmware Required: EUI 20s or Newer
Based On: LineageOS
Version Information
Status: Testing
Stable Release Date: 2018-07-25
Beta Release Date: 2018-07-25
Created 2018-07-25
Last Updated 2018-07-24
** Note **
reservedddddddddddddddddddddddddddddddddddddddddddddddddddd
** Note **
Can I flash GSI by Phhusso:
I didn't try it yet, our device is ARM64 System A.
How to Flash GSI:
Download your favorite GSI rom.
Flash via TWRP or fastboot. BUT please keep attention to not wipe vendor or will not get booted, you are allowed to update vendor partition only if I release new build with fix things.
How Can I flash Android P Developer Preview 5:
Click on the following link.
Download ARM64 System A image. and 3 zips for post GSI.
Flash the system.img of Android via fastboot (recommend).
Reboot to TWRP.
Go to Mount-> check Vendor partition.
Flash the 3 zip as they arranged (1-2-3),
Reboot, enjoy Android P DP5.
NOTE:
This project has nothing to do with official updates, I did Project Treble by my initiative that will not affect with official roms. Might someone will reconsider supporting Treble even with official update tho?
Damn Congratulations!
I can't do it today. But, I will definitely try it this weekend. Thanks for sharing these test builds. I am definitely looking forward to checking it out!
Thanks again!
I will go ahead and download it and get started ASAP.
---------- Post added at 08:48 PM ---------- Previous post was at 08:41 PM ----------
haky 86 said:
Can I flash GSI by Phhusso:
I didn't try it yet, our device is ARM64 System A.
How to Flash GSI:
Download your favorite GSI rom.
Flash via TWRP or fastboot. BUT please keep attention to not wipe vendor or will not get booted, you are allowed to update vendor partition only if I release new build with fix things.
Click to expand...
Click to collapse
I just want to say again, that you are awesome for doing this, I didn't think it was possible with this phone. I am blown away! Nice job!
Hmmm can I shirk off my plans and install this right now? lol!
---------- Post added at 09:07 PM ---------- Previous post was at 08:49 PM ----------
I have a question about Gapps, Magisk and firmware.
I assume Firmware is not an issue since it would still get flashed to the correct partition. With Magisk, I assume that you would prefer that we use 16.7?
What should we use for Gapps? Do you have a specific Gapps in mind?
Wonderful Work~
Its a great! Wonderful work, now wait to fix all bugs now.
I have a doubt. Is the known bug caused by the PT partition? If flash Android P, will those bug still exist?
what should i say , it is great job !!!!!
haky 86 said:
reservedddddddddddddddddddddddddddddddddddddddddddddddddddd
Click to expand...
Click to collapse
Hi bro all fixes are completely done ,just use my trees here ,github.com/chityanj , recommend not to make changes to common tree, use as it is, where as for zl1 try make changes as per my x2 tree, yeah cam requires a blob edit in vendor, I can help u that
Any info about IR support and NFC Smartcard Service?
Most hyped project for now, congratulation. Peoples don't even woke up and already you haven't 2 pages of comments and 15 likes. Congratulation! If everything will be good I'll buy you a beer
Crystal-L said:
I have a doubt. Is the known bug caused by the PT partition? If flash Android P, will those bug still exist?
Click to expand...
Click to collapse
let me fix all those bugs and I can port the rom you want then.
shivatejapeddi said:
Hi bro all fixes are completely done ,just use my trees here ,github.com/chityanj , recommend not to make changes to common tree, use as it is, where as for zl1 try make changes as per my x2 tree, yeah cam requires a blob edit in vendor, I can help u that
Click to expand...
Click to collapse
congrats for fixes, hmm I will give a look right now. :good:
edit: what about the error in domain.te in system/sepolicy? I had to remove coredomain to let compiling go.
qqzwc said:
Any info about IR support and NFC Smartcard Service?
Click to expand...
Click to collapse
NFC already fixed just check "Works"
D1stRU3T0R said:
Most hyped project for now, congratulation.... If everything will be good I'll buy you a beer
Click to expand...
Click to collapse
O...M...G....! I see the bricking season has begun, already in summer?
Role reversal: if it (Oreo) [almost] works ......f**k with it!:good:
Good luck!
xen2001 said:
O...M...G....! I see the bricking season has begun, already in summer?
Role reversal: if it (Oreo) [almost] works ......f**k with it!:good:
Good luck!
Click to expand...
Click to collapse
) hopefully will work on x722, bcs always there is the problem.
haky 86 said:
let me fix all those bugs and I can port the rom you want then.
congrats for fixes, hmm I will give a look right now. :good:
edit: what about the error in domain.te in system/sepolicy? I had to remove coredomain to let compiling go.
NFC already fixed just check "Works"
Click to expand...
Click to collapse
Can you answer the question about Gapps?
Is a version of Gapps available for this yet?
haky 86 said:
let me fix all those bugs and I can port the rom you want then.
congrats for fixes, hmm I will give a look right now. :good:
edit: what about the error in domain.te in system/sepolicy? I had to remove coredomain to let compiling go.
NFC already fixed just check "Works"
Click to expand...
Click to collapse
hi be on permissve for now some sepolicy need to be rewritten and nuke that causes compliation issues
shivatejapeddi said:
hi be on permissve for now some sepolicy need to be rewritten and nuke that causes compliation issues
Click to expand...
Click to collapse
alright, I also forget to edit the mk files like Android.mk in the proprietary blobs probably that's why buggy.. I'll post new screenshots once got fixed :angel:
Damn, I sell my device.
Thank you for your support.
lazye53 said:
Damn, I sell my device.
Thank you for your support.
Click to expand...
Click to collapse
too late <3
well let's give this a go on x722 and see what happens .. Thanks for the hard work, it's highly appreciated !
HTML:
Pixel Experience ROM for the Galaxy Note 9
What is this?
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)
Our mission is to offer the maximum possible stability and security, along with essential features for the proper functioning of the device
Based on Android 8.1
Click to expand...
Click to collapse
What's working?
Everything seems to be working as on the official s9 los15 build; with minor exceptions (screen recording can sometimes be a lil buggy, nfc can be a lil hicky etc)
What's not working?
Obviously Samsung's own features such as Samsung Pay, KNOX, Theme Center, Game Launcher, etc. won't be ported to LineageOS Pixel Experience. We may have our own implementation to similar functions, though.
Iris sensor does not work because AOSP upstream does not support that yet.
IMS services (VoLTE, VoWiFi, etc). Samsung has their own proprietary implementation. It is not really possible to easily port that to LineageOS PixelExperience.
Click to expand...
Click to collapse
Disclaimer: This rom is not built by me. That has been done by @malinathani with some help from myself. After that he insisted that I make this thread :highfive:
Instructions:
Make sure TWRP has been installed and functional.
Download the latest build linked below
Reboot to recovery
Wipe data and cache (required if you switch from other ROMs). Even better if you have nothing to loose and wipe system,data,cache,storage etc
Flash the latest build (and gapps). DONT flash gapps. they are already included in the rom.
Reboot and enjoy :victory:
Downloads:
Galaxy Note9 (N960F): MEGA Onedrive
Providing feedback:
You are more than welcome to provide any kind of feedback here.
(limited only to feature requests; it's called "pixel experience" for a reason and it should stay that way)
You can also msg me anytime on telegram @ Rainbow_Alex_Dash
OR YOU CAN JOIN OUR TELEGRAM GROUP!
https://t.me/joinchat/E_rQyU__5M_5wph6FrnpKA
Changelog:
30.09.2018: Initial release
Troubleshooting/FAQ:
Q: Whaaaaaa??? You are developing for the note9 now?
A: Nah, not really. This isn't even built by me. I just helped the guy who did it so much he insisted I create the thread. I'm not promising any future development on my end but hey
Q: The rom isn't booting/camera doesn't work
A: Flash/make sure you have the ARH5 vendor and try again.
Q: The rom is in a bootloop/google apps keep crashing
A: You did read the instructions and NOT flash any gapps riighhttt?? smh, wipe /system,/data and /cache and start over
Q: I have another bug; How can i tell it to you while slightly increasing my changes of it ever getting fixed.
A: You can tell me what's going on either here or on telegram WITH A LOGCAT attached(required);if rom isn't booting at all attach /proc/last_kmsg.
Q: I don't know what/how to logcat. Is it really necessary?
A: Logcat or gtfo
Q: How can i support you?
A: Awwww thanks; On most of my posts on the left side there's a "donate to me" paypal button; You can use that,donations are more than welcome, or if you don't have any $ to spare you can also post here about how awesome i am (this surprisingly helps very much)
XDA:DevDB Information
Pixel Experience 8.1, ROM for the Samsung Galaxy Note 9
Contributors
Rainbow_Dash, malinathani, jesec,Vaughnn,farovitus
Source Code: https://github.com/malinathani
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 30.09.2018
Stable Release Date: 2018-09-30
Created 2018-09-30
Last Updated 2018-10-03
reserved
It seems that no one wants to brush the machine.
But still thank you very much
Does the pen work ?
giorgior.r said:
Does the pen work ?
Click to expand...
Click to collapse
Does work as a stylus, you can check it out and let us know!
Thanks for this. Was waiting for an AOSP Based ROM before rooting. Will root and flash later and report back .
Test it out and let us know what you guys think! Feedback is appreciated
Good day,
1. Is there a link/attachment for an official ARH5/ARH6 vendor image that we can use with this ROM?
2. I wiped /system,/data and /cache flashed the ROM with and without an ARH6 image (https://androidfilehost.com/?fid=1322778262904015418) within TWRP and got bootloop.
What am I missing?
Swarai said:
Good day,
1. Is there a link/attachment for an official ARH5/ARH6 vendor image that we can use with this ROM?
2. I wiped /system,/data and /cache flashed the ROM with and without an ARH6 image (https://androidfilehost.com/?fid=1322778262904015418) within TWRP and got bootloop.
What am I missing?
Click to expand...
Click to collapse
Ummm, you can try flashing vendor from the Light Rom thread or try flashing noverity.zip after flashing the ROM.
There are a bunch of them. In treble forums
Surprised no one bothered to upload them here
All pie gsi roms work with note 9
TheUndertaker21 said:
There are a bunch of them. In treble forums
Surprised no one bothered to upload them here
All pie gsi roms work with note 9
Click to expand...
Click to collapse
I totally agree, but give this a shot once, it's noticeably smooth compared to the gsis out there (I've used many myself) it also has dual speakers working. As for pie gsis they have this animation lag while switching and opening apps. Give it a shot and I hope you'll like it.
malinathani said:
I totally agree, but give this a shot once, it's noticeably smooth compared to the gsis out there (I've used many myself) it also has dual speakers working. As for pie gsis they have this animation lag while switching and opening apps. Give it a shot and I hope you'll like it.
Click to expand...
Click to collapse
Thank you. Great to have specific support just for Note9!
I've tried other GSIs from Treble forums and yes on those roms only mono audio output works and also had brightness issues last time I tried it. I will try this out
---------- Post added 1st October 2018 at 12:31 AM ---------- Previous post was 30th September 2018 at 11:49 PM ----------
I flashed it and I gotta say, this is very good. I'll keep this as my daily driver if I don't run into any issues which I haven't so far
I really like that there's bixby button custom options included. Rom is super smooth. Definitely smoother than other GSIs on the treble forums. Dual speakers are working but volume seems lower than stock (can anyone confirm this?)
Regarding the vendor, I am using ARH6 vendor. Like I said, so far I haven't gotten any issues.
I think you should include in OP that root isn't included. I flashed Magisk zip and it works fine though
Nasty_z said:
Thank you. Great to have specific support just for Note9!
I've tried other GSIs from Treble forums and yes on those roms only mono audio output works and also had brightness issues last time I tried it. I will try this out
---------- Post added 1st October 2018 at 12:31 AM ---------- Previous post was 30th September 2018 at 11:49 PM ----------
I flashed it and I gotta say, this is very good. I'll keep this as my daily driver if I don't run into any issues which I haven't so far
I really like that there's bixby button custom options included. Rom is super smooth. Definitely smoother than other GSIs on the treble forums. Dual speakers are working but volume seems lower than stock (can anyone confirm this?)
Regarding the vendor, I am using ARH6 vendor. Like I said, so far I haven't gotten any issues.
I think you should include in OP that root isn't included. I flashed Magisk zip and it works fine though
Click to expand...
Click to collapse
How well does it handle memory? I heard AOSP roms on GS9 doesn't keep apps in memory as well as stock.
Also for the low volume thing. Have you tried Dolby Atmos? It has always helped me in the past with my phones.
Okay so.. I'm having a weird issue. The rom was working perfectly fine and then it started to register every single tap as a long press. Every time I touch the screen, it registers a long press. If this issue can be fixed, everything else was working great. At first, I thought it was because I installed magisk modules but I just uninstalled magisk completely and the issue is still there. Logcat is attached.
@Fiso I'll try Dolby Atmos and keep an eye on memory as soon as the touchscreen issue goes away.
Logcat: https://mega.nz/#!90YFDArb!Yz_d5eHQPXfjZ2NIp6OLCTgzUBJ04bcwPbyAxZ3V3jE
Nasty_z said:
Okay so.. I'm having a weird issue. The rom was working perfectly fine and then it started to register every single tap as a long press. Every time I touch the screen, it registers a long press. If this issue can be fixed, everything else was working great. At first, I thought it was because I installed magisk modules but I just uninstalled magisk completely and the issue is still there. Logcat is attached.
@Fiso I'll try Dolby Atmos and keep an eye on memory as soon as the touchscreen issue goes away.
Logcat: https://mega.nz/#!90YFDArb!Yz_d5eHQPXfjZ2NIp6OLCTgzUBJ04bcwPbyAxZ3V3jE
Click to expand...
Click to collapse
Hmmmm, that's weird, which module did you install btw? If you still have this issue you can try dirty flashing the ROM or clean installing it again. I tested the ROM myself for almost a week before releasing it. Also which model are you using?
malinathani said:
Hmmmm, that's weird, which module did you install btw? If you still have this issue you can try dirty flashing the ROM or clean installing it again. I tested the ROM myself for almost a week before releasing it. Also which model are you using?
Click to expand...
Click to collapse
The module was xposed installer for the latest SDK. Model is N960F. Dirty flashing did not help. So I did a clean flash and it's fine for now. I'll flash magisk and install modules other than xposed and try
Nasty_z said:
The module was xposed installer for the latest SDK. Model is N960F. Dirty flashing did not help. So I did a clean flash and it's fine for now. I'll flash magisk and install modules other than xposed and try
Click to expand...
Click to collapse
I currently have xposed installed myself, I installed xposed framework module which automatically installs it for the correct SDK version.
Nice rom, but there is no mirrorlink :crying:
malinathani said:
I currently have xposed installed myself, I installed xposed framework module which automatically installs it for the correct SDK version.
Click to expand...
Click to collapse
Yeah it isn't the module. I've done some more tests. The issue only happens if I install or restore multiple applications. Not sure why. Can you tell me what vendor you use?
Also, the keyboard seems sluggish. I don't mean the UI, like the touch responsivenes? If you type really fast, keyboard can't keep up (compared to stock)? Can you confirm this?
Nasty_z said:
Yeah it isn't the module. I've done some more tests. The issue only happens if I install or restore multiple applications. Not sure why. Can you tell me what vendor you use?
Also, the keyboard seems sluggish. I don't mean the UI, like the touch responsivenes? If you type really fast, keyboard can't keep up (compared to stock)? Can you confirm this?
Click to expand...
Click to collapse
I would recommend you to reinstall apps only from playstore and not restore them because that is known to break stuff. I have no lag issues even on keyboard which you are saying. if you still have issues you can try with ARH5 vendor.
Intro(Skip at your wish xd):
Hello guys, it's kind of frustrating that our 4a 5G don't get much love here(in custom ROM development perspective) as Pixel 5 as it's not really a "main" variant.
For myself, I love Pixel devices for Google releases "proper" device tree and most necessary stuff, but still it require quite some time for me to get things right and a working ROM build, hell, to be honest, I spent like about 30 hrs already as this is my first time to use AOSP tree + vendor blobs from Google site to build ROMs)
Despite the lack of previous experience, the first build that I'm releasing here, is working quite well, I haven't discovered any (device-specific) bug just yet, anyway, let's continue
Click to expand...
Click to collapse
Instructions:
0. Make sure your bootloader is unlocked
1. Download ROM zip from the link below, and grab Magisk patched boot.img inside the folder as well if you want root access
2. Reboot to bootloader
2.5. Flash updated bootloader.img and radio.img from Google site
3. Use `fastboot -w update LineageOS_microG-bramble-(BUILD DATE HERE)-userdebug-signed.zip` to flash
and yes, you can omit the "-w" parameter if you're not flashing for the first time, aka just updating from previous release
4(optional). Hopefully after flashing you'll be booted into LineageOS, reboot to bootloader again,
and flash the Magisk patched boot.img extracted from the 7z file with `fastboot flash boot magisk_patched.img`,
reboot after finished
5. Enjoy!
Click to expand...
Click to collapse
Features:
1. MicroG integrated nicely (Thank OmniROM dev([email protected]) for the repo)
2. Replaced default WebView with Bromite WebView
3. Default DNS was set to UncensoredDNS in framework overlay
4. Removed unnecessary prebuilt APKs
Click to expand...
Click to collapse
Download
Contacts:
Telegram:
Channel for Pixel 4a 5G related stuff
Group for Pixel 4a 5G discussion
Special thanks: @kdrag0n , @akhilnarang for helping me with issues when I couldn't get my build working
XDA:DevDB Information
LineageOS 18.1 - microG Edition, ROM for the Google Pixel 4a 5G
Source
ROM
Kernel
Contributors
dic1911
ROM OS Version: Android 11
ROM Kernel: Linux 4.x
ROM Firmware Required: Current
Based On: LineageOS
Version Information
Status: Testing
Created 2020-11-29
Last Updated 2020-12-16
Current Known Issue
1. Some minor bubble notification glitch, ROM side issue.
2. Video call is unstable, crashes in about ~10 minutes after the call starts (untested in latest update, may be fixed)
3. If mobile data doesn't work after update, try select/set APN manually(select whatever APN first, then select the correct one after)
Reserved
Awesome, thank you!
I've never heard of the MicroG before so just looked that up. I'm loving that philosophy so I'm definitely gonna be checking that out! Thanks! My pixel is arriving tomorrow so after playing around with it first, I'll try out your ROM once there's more responses from others here.
Hey thx for the ROM is a A11 Version planned?
I'll wait for Android 11 version
Dimontiman said:
Hey thx for the ROM is a A11 Version planned?
Click to expand...
Click to collapse
warrencoakley said:
I'll wait for Android 11 version
Click to expand...
Click to collapse
LineageOS 18.0 is Android 11, but XDA didn't update the option menu so I chose Android 10.
View attachment 5144565
Took a while for this thread to pop back up after forum migration..
Thanks for the awesome work
Is anyone using this ROM as their daily driver? I'm still reluctant to risk my warranty
I guess I will roll the dice and give it a go. Anyone know if this will affect my e-sim with Google Fi?
Thank you, dic1911 for being so awesome to bring first rom to Bramble, which is almost brand-new! I appreciate your work and we are really glad for it.
Joegrizz said:
I guess I will roll the dice and give it a go. Anyone know if this will affect my e-sim with Google Fi?
Click to expand...
Click to collapse
It won't affect Google Fi.
Thanks. It looks great and runs good but I’m obviously missing something. I tried installing GApps via ADB side load and no matter which size Nikhil version I attempt to install, I get an error there’s not enough memory. I’ve rebooted after flashing to the rom and also done a factory reset to no avail. What am I missing? I’ve also tried it with and without the patched boot.img.
tgilmore16 said:
Thanks. It looks great and runs good but I’m obviously missing something. I tried installing GApps via ADB side load and no matter which size Nikhil version I attempt to install, I get an error there’s not enough memory. I’ve rebooted after flashing to the rom and also done a factory reset to no avail. What am I missing? I’ve also tried it with and without the patched boot.img.
Click to expand...
Click to collapse
Use systemless WeebGapps via Magisk:
t.me/WeebGAppsChannel
Does this rom use seedvault like mainline lineageos? Or is google backup in here even with microg?
Crashdown1994 said:
Is anyone using this ROM as their daily driver? I'm still reluctant to risk my warranty
Click to expand...
Click to collapse
Warranty? Should not effect that. I wouldn't think it would. Bootloader is unlockable and google even gives the option to flash aosp vanilla(no google) or public (official google rom) with their flashing tool (via chrome browser).
Are Pixel-Exclusive features such as Now Playing, Live Captions, Call Screening, Adaptive Sound, Screen Attention included and working?
Any issues getting safetynet to pass?
GoldElocks said:
Are Pixel-Exclusive features such as Now Playing, Live Captions, Call Screening, Adaptive Sound, Screen Attention included and working?
Any issues getting safetynet to pass?
Click to expand...
Click to collapse
This is Lineage... You install this one to get privacy and free yourself from Gapps. You might be able to get most features running, but then you just can stay with stock - privacy is then gone again...
letrain02 said:
Does this rom use seedvault like mainline lineageos? Or is google backup in here even with microg?
Click to expand...
Click to collapse
SeedVault is builtin system app for all LineageOS builds, no matter it's official or not, if it's not there in someone else's build, either it's removed by the builder or the build is too old.
So yes, SeedVault is in my build, but there's no guarantee that it works with any apps just like Google Backup(which I found pretty much useless in my case)
PS. I'm not really as active as I was on xda since about 2 years ago, please join Telegram for more updated stuff
PPS. I released GCam extracted from stock ROM and modified to make it work on LineageOS(and pretty much any custom ROM with right stuff baked in), and yes, you'll need to flash updated build from my Telegram channel (It's more convenient for me to upload to Telegram as the storage space there is unlimited)
LineageOS 18.1 is up!
Now with December security patch, grab it from the link in OP
Based on https://developer.sony.com/develop/...osp-build-instructions/build-aosp-android-12l
No changes. Completely Vanilla for now. Use https://developer.sony.com/develop/open-devices/downloads/software-binaries/ Kumano for Xperia 5
Download: https://sites.google.com/view/miustone/DIOS
Magisk GApps: https://sourceforge.net/projects/litegapps/files/litegapps/arm64/32/lite/
Magisk MicroG: https://github.com/nift4/microg_installer_revived
You may want to patch the boot.img with Magisk before flashing...
Cameras arent working yet see: https://github.com/sonyxperiadev/bug_tracker/issues/770
ALSO LOOKING FOR D!OS TESTERS AND DEVS TO JOIN MY NEW OS... PM ME!
CAUTION! THIS DOES WIPE ALL YOUR DATA!
Instructions:
Extract the Zip File to Your Fastboot Destination
Extract the Xperia Binaries Image to Your Fastboot Destination
Rename the Xperia Binaries Image to oem.img
Double Click the AOSXP-FLASH-XXX.bat File. Enjoy the Magic
Hello, there are screen shots
simple aosp, camera not working, no google apps, mtp, wi-fi not working
qwerta12 said:
simple aosp, camera not working, no google apps, mtp, wi-fi not working
Click to expand...
Click to collapse
"No changes. Completely Vanilla for now."
Working on including GApps and fixing the Issues rn... More coming soon!
TWRP and LOS coming afterwards...
Optimized some Things. New Builds comming today...
Miustone said:
Optimized some Things. New Builds comming today...
Click to expand...
Click to collapse
I'm waiting, I'll flash it as soon as you post it
qwerta12 said:
I'm waiting, I'll flash it as soon as you post it
Click to expand...
Click to collapse
I ran into some issues last night. Solved all of the issues but i have bootloops with OpenGApps included :/ Need to put more time into that...
Miustone said:
I ran into some issues last night. Solved all of the issues but i have bootloops with OpenGApps included :/ Need to put more time into that...
Click to expand...
Click to collapse
I think you can try to enable NikGapps or FlameGapps, maybe this is the problem
qwerta12 said:
I think you can try to enable NikGapps or FlameGapps, maybe this is the problem
Click to expand...
Click to collapse
I was always an OpenGApps user but seems like they don't put that much effort into it still... Think ill go with BiTGApps. Ill check Your mnetioned ones too. Thx
Miustone said:
I was always an OpenGApps user but seems like they don't put that much effort into it still... Think ill go with BiTGApps. Ill check Your mnetioned ones too. Thx
Click to expand...
Click to collapse
Good luck to you, is it working out?
qwerta12 said:
Good luck to you, is it working out?
Click to expand...
Click to collapse
Thanks! I have actually issues after trying to fix Wifi... Think ill start off with TWRP for now and AOSP after that. So we can flash external GApps (or not if wanted). Only Problem is that we have to use a Recovery inside the Kernel Image on 2019 Xperias. Means i have to choose a Kernel. Since we dont get Updates anymore would i bet on the AOSP Kernel since it is what we want to use anyways... Ill ask out the SODP Devs about some Help with that. Xperias from 2020+ can just grab a Recovery Image without the need to choose a Kernel with it. They also use Dynamic Partitions which is different from our 2019 Xperia A/B Static Partitions...
Lot of work to do but think it will go fast with some help
Miustone said:
Thanks! I have actually issues after trying to fix Wifi... Think ill start off with TWRP for now and AOSP after that. So we can flash external GApps (or not if wanted). Only Problem is that we have to use a Recovery inside the Kernel Image on 2019 Xperias. Means i have to choose a Kernel. Since we dont get Updates anymore would i bet on the AOSP Kernel since it is what we want to use anyways... Ill ask out the SODP Devs about some Help with that. Xperias from 2020+ can just grab a Recovery Image without the need to choose a Kernel with it. They also use Dynamic Partitions which is different from our 2019 Xperia A/B Static Partitions...
Lot of work to do but think it will go fast with some help
Click to expand...
Click to collapse
it's very good, I think everything will work out
if you want i could help as a tester
WiFi Fix is Merged
[9.12.r1] base_sm8150: Enable QCACLD WLAN by bartcubbins · Pull Request #116 · sonyxperiadev/kernel-defconfig
Enable Qualcomm Atheros CLD WLAN driver. Signed-off-by: Pavel Dubrova [email protected]
github.com
I'll do a resync with April Security Patch and all Apps removed. I'll make TWRP based on it so we can flash GApps and Magisk stuff...
New Build uploading. No Apps included so consider using Magisk Micro G if You want to use it as daily for now.
It's android-12.1.0_r4 so 12L April Security Patch. Wifi should work now. For Camera Please try GCam by BSG or Open Camera. TWRP Comes soon...
Releases · nift4/microg_installer_revived
Install microG GmsCore, GsfProxy, FakeStore (or Play Store if you want so) and MapsV1 to /system/ - nift4/microg_installer_revived
github.com
Miustone said:
New Build uploading. No Apps included so consider using Magisk Micro G if You want to use it as daily for now.
It's android-12.1.0_r4 so 12L April Security Patch. Wifi should work now. For Camera Please try GCam by BSG or Open Camera. TWRP Comes soon...
Releases · nift4/microg_installer_revived
Install microG GmsCore, GsfProxy, FakeStore (or Play Store if you want so) and MapsV1 to /system/ - nift4/microg_installer_revived
github.com
Click to expand...
Click to collapse
Is it possible to embed a stock camera application into the firmware? in such a rom it would be very useful
qwerta12 said:
Is it possible to embed a stock camera application into the firmware? in such a rom it would be very useful
Click to expand...
Click to collapse
Like that... https://github.com/GrapheneOS/Camera/releases ?
Upload went wrong. Restarted. Sorry! Kernel need to be redone for the Wifi fix so it is still broken on the actual upload. Ill work on that...
Miustone said:
Like that... https://github.com/GrapheneOS/Camera/releases ?
Upload went wrong. Restarted. Sorry! Kernel need to be redone for the Wifi fix so it is still broken on the actual upload. Ill work on that...
Click to expand...
Click to collapse
friend, it's okay, everything is fine, it will still work out by drawing
but about the camera, yet I was talking about adding a camera from the Sony stock firmware...
is there dual-sim support working?
Miustone said:
"No changes. Completely Vanilla for now."
Working on including GApps and fixing the Issues rn... More coming soon!
TWRP and LOS coming afterwards...
Click to expand...
Click to collapse
PLeeasssse, leave the Gapps optional, as they could be installed afterwards anyway! This leaves the choice to go for MicroG .
qwerta12 said:
friend, it's okay, everything is fine, it will still work out by drawing
but about the camera, yet I was talking about adding a camera from the Sony stock firmware...
Click to expand...
Click to collapse
I am keeping focus on excluding all the Stock stuff. There will be no Stock Camera or other Stock Apps. But GCam Support and an own Camera App based on the new CameraX stuff are the Goal...
Ermann123 said:
is there dual-sim support working?
Click to expand...
Click to collapse
Yes
Ermann123 said:
PLeeasssse, leave the Gapps optional, as they could be installed afterwards anyway! This leaves the choice to go for MicroG .
Click to expand...
Click to collapse
I will keep that in Mind!
Hi guys,
I really love RR and since my wife still has her Galaxy S8 and since there seems to be no one else who is willing to maintain the latest Resurrection Remix ROM for the Samsung Galaxy S8 for Android Q, I offer you this unofficial version.
-/\-/\-/\-/\-/\-/\-/\-/\-/\-
Note:
By downloading this ROM you take full responsibility of all consequences by your own!
I'm not responsible if you brick your device or do any other damage.
-\/-\/-\/-\/-\/-\/-\/-\/-\/-
Download and changelog for dreamlte, dream2lte and greatlte:
https://freeze.ws/RR
-/\-/\-/\-/\-/\-/\-/\-/\-/\-
Please don't ask me for support how to flash!
-\/-\/-\/-\/-\/-\/-\/-\/-\/-
Kernel Source: https://github.com/exynos8895/android_kernel_samsung_universal8895/tree/lineage-17.1
Resurrection Remix Source: https://github.com/ResurrectionRemix
-/\-/\-/\-/\-/\-/\-/\-/\-/\-
There are three changes I've made:
- The default networkTransitionTimeout is decreased from 60 to 30 seconds.
- The bluetooth icon in the status bar is visible as soon as bluetooth is enabled (and not only if a bluetooth device is connected).
- The battery LED color can be set individually for the range 90 to 99% (so you have <90% charging, 90% to 99% nearly full and 100% full).
Everything else is default RR!
-\/-\/-\/-\/-\/-\/-\/-\/-\/-
These are the device/vendor sources I use for the build:
https://github.com/exynos8895/android_device_samsung_dreamlte
https://github.com/exynos8895/android_device_samsung_dream2lte
https://github.com/exynos8895/android_device_samsung_greatlte
https://github.com/exynos8895/android_device_samsung_universal8895-common
https://github.com/exynos8895/android_vendor_samsung_dreamlte
https://github.com/exynos8895/android_vendor_samsung_dream2lte
https://github.com/exynos8895/android_vendor_samsung_greatlte
https://github.com/exynos8895/android_vendor_samsung_universal8895-common
-/\-/\-/\-/\-/\-/\-/\-/\-/\-
Big thanks to the LineageOS team, to mainey, to Stricted and especially to all the RR developers.
Thank you for this amazing ROM!!
-\/-\/-\/-\/-\/-\/-\/-\/-\/-
Feel free to donate, if you want to
Do you have a screenshot and how is the game performance?
I like to play games and I use hadesrom, it is very fluent and successful, I will test and share this rom. There is volte support on the rom's own page, but this port also works on the rom, has anyone tried it?
ylmz134 said:
Do you have a screenshot and how is the game performance?
Click to expand...
Click to collapse
Please have a look onto the official page of RR:
Resurrection Remix OS | Get Resurrected
resurrectionremix.com
I have no idea about the game performance, but I would say this depends only on the kernel you are using. Of course you can also flash other kernels.
Also compiled the ROM for S8+ and N8.
See the link in the starting post for download.
Please note: I don't have a S8+ nor a N8, so I'm not able to test it!
Freeze24 said:
Also compiled the ROM for S8+ and N8.
See the link in the starting post for download.
Please note: I don't have a S8+ nor a N8, so I'm not able to test it!
Click to expand...
Click to collapse
Will try it tomorrow on my s8+. And report back
Freeze24 said:
Also compiled the ROM for S8+ and N8.
See the link in the starting post for download.
Please note: I don't have a S8+ nor a N8, so I'm not able to test it!
Click to expand...
Click to collapse
Currently running your build. Thanks you for your work...
I have found two problems. One is s8/+ has a on sceen button. Which we can press to turn to device on. This feature works in all the roms i have use. It even works in recovery. But not working in this device. 2. Pressing Power button+ volume down doesn't take screenshots... My usb port is kind of broken. Thats why i am unable to provide adb logs. But if you suggest any apps that can take good logs using root. Then i can provide logs using that app
Refayatul said:
Currently running your build. Thanks you for your work...
I have found two problems. One is s8/+ has a on sceen button. Which we can press to turn to device on. This feature works in all the roms i have use. It even works in recovery. But not working in this device. 2. Pressing Power button+ volume down doesn't take screenshots... My usb port is kind of broken. Thats why i am unable to provide adb logs. But if you suggest any apps that can take good logs using root. Then i can provide logs using that app
Click to expand...
Click to collapse
Thank you for your feedback.
Said to hear that. On my wife's S8 all this works fine. So this is really strange.
Normally I'm using https://nolanlawson.com/apps/#catlog for the logs.
Maybe you could try another kernel?
Freeze24 said:
Thank you for your feedback.
Said to hear that. On my wife's S8 all this works fine. So this is really strange.
Normally I'm using https://nolanlawson.com/apps/#catlog for the logs.
Maybe you could try another kernel?
Click to expand...
Click to collapse
Since you are new to s8+ development. Give this rz kernel a try. When all of us were using a10/11 . This was the kernel that every dev would recommend us to use.
Refayatul said:
Since you are new to s8+ development. Give this rz kernel a try. When all of us were using a10/11 . This was the kernel that every dev would recommend us to use.
Click to expand...
Click to collapse
Thanks. I tried to compile the ROM with the kernel source from https://github.com/diepquynh/android_kernel_samsung_universal8895.
Unfortunately it seems that this kernel requires a newer version of gcc and to be honest I don't know how to implement this in my build process.
So at the moment the only possibility I see is to flash the kernel manually after flashing the ROM.
Great ROM ... I have been using RR since a long time .... if could you please update the security patch as well as the vendor security patch for dreamlte ... that would be awesome...
farish_xda said:
Great ROM ... I have been using RR since a long time .... if could you please update the security patch as well as the vendor security patch for dreamlte ... that would be awesome...
Click to expand...
Click to collapse
Thank you. The security patch level is currently Oct 2022. Maybe I can update to Dec this weekend.
But I have to say: The code base got pretty old in the meantime and so the number of patches which can't be included, because the code is totally different today, increases. So I'm not able to implement all fixes.
And I have absolutely no idea about vendor security patches. Where would I get these?
++ UPDATE ++
download: https://freeze.ws/RR
security string: 2022-12-05
Code:
CVE-2022-20472
CVE-2022-20473
CVE-2022-20470
CVE-2022-20474
CVE-2022-20485
CVE-2022-20486
CVE-2022-20491
CVE-2021-0934
CVE-2022-20449
CVE-2022-20476
CVE-2022-20500
CVE-2022-20144
CVE-2022-20478
CVE-2022-20479
CVE-2022-20480
CVE-2022-20484
CVE-2022-20487
CVE-2022-20488
CVE-2022-20495
CVE-2022-20501
CVE-2022-20466
not implemented:
CVE-2022-20124
CVE-2022-20442
CVE-2022-20611
CVE-2022-20411
CVE-2022-20498
CVE-2022-20469
CVE-2022-20144
CVE-2022-20483
CVE-2022-20468
CVE-2022-23960
Home button press screen wakeup is not working ....
Have you already tried RZ kernel as recommended by Refayatul?
https://forum.xda-developers.com/t/...-remix-8-7-q-unofficial.4528715/post-87852797
Freeze24 said:
Have you already tried RZ kernel as recommended by Refayatul?
https://forum.xda-developers.com/t/...-remix-8-7-q-unofficial.4528715/post-87852797
Click to expand...
Click to collapse
Tried it now by my own.
RZ kernel doesn't work at all for me.
RAD kernel didn't show any improvement concerning the problem with the screen wakeup.
So it seems to be something related to the ROM itself. But I have no idea..
This ROM has the same base I'm using for my S9 and there it works without problems.
At the moment I'm not sure if it makes sense to develop this any further.
With the latest release I have problems with Magisk, which didn't reinstalled automatically and also Google Apps had some problems without reinstalling. Strange.....
farish_xda said:
Home button press screen wakeup is not working ....
Click to expand...
Click to collapse
I repaired the broken wakeup button. Reason was the missing sec_touchscreen.kl in /system/usr/keylayout which maps the touch key to KEY_WAKUEP.
Download: https://freeze.ws/RR
I've fixed the problem that Magisk, OpenGapps and so on were not reinstalled automatically after dirty flash.
If you installed the apps properly (for Magisk patching the boot img is not enough, you have to do another direct install from the App!), the reinstallation should work now automatically if you are dirty flashing a new version.
Download: https://freeze.ws/RR
Freeze24 said:
I repaired the broken wakeup button. Reason was the missing sec_touchscreen.kl in /system/usr/keylayout which maps the touch key to KEY_WAKUEP.
Download: https://freeze.ws/RR
Click to expand...
Click to collapse
great news .... let me download the rom and try it again ...
Working perfectly ....... good job brother