After uploading wrong firmware I bricked my M96X mini.
I managed to solder a serial header and using FTDI board I can see this log:
GXL:BL1:9ac50e:a1974b;FEAT:ADFC318C;POC:3;RCY:0;EM MC:0;READ:0;0.0;CHK:0;
TE: 47693
BL2 Built : 13:48:56, Sep 23 2016.
gxl g7459bd4 - [email protected]
set vcck to 1120 mv
set vddee to 1000 mv
Board ID = 2
CPU clk: 1200MHz
DQS-corr enabled
DDR scramble enabled
DDR3 chl: Rank0+1 @ 720MHz - FAIL
DDR3 chl: Rank0 @ 720MHz - FAIL
DDR3 chl: Rank0 16bit @ 720MHz - PASS
Rank0: 1024MB-2T-11
DataBus test pass!
ADDR-W[0x20000000]:0xaaaaaaaa,R:0xc3512a13
ADDR3-W[0x00000004]:0x55555555,R:0x3caed5ec
ADDR3-W[0x00000008]:0x55555555,R:0x3caed5ec
ADDR3-W[0x00000010]:0x55555555,R:0x3caed5ec
ADDR3-W[0x00000020]:0x55555555,R:0x3caed5ec
ADDR3-W[0x00000040]:0x55555555,R:0x3caed5ec
ADDR3-W[0x00000080]:0x55555555,R:0x3caed5ec
ADDR3-W[0x00000100]:0x55555555,R:0x3caed5ec
ADDR3-W[0x00000200]:0x55555555,R:0x3caed5ec
ADDR3-W[0x00000400]:0x55555555,R:0x3caed5ec
ADDR3-W[0x00000800]:0x55555555,R:0x3caed5ec
ADDR3-W[0x00001000]:0x55555555,R:0x3caed5ec
ADDR3-W[0x00002000]:0x55555555,R:0x3caed5ec
ADDR3-W[0x00004000]:0x55555555,R:0x3caed5ec
ADDR3-W[0x00008000]:0x55555555,R:0x3caed5ec
ADDR3-W[0x00010000]:0x55555555,R:0x3caed5ec
ADDR3-W[0x00020000]:0x55555555,R:0x3caed5ec
ADDR3-W[0x00040000]:0x55555555,R:0x3caed5ec
ADDR3-W[0x00080000]:0x55555555,R:0x3caed5ec
ADDR3-W[0x00100000]:0x55555555,R:0x3caed5ec
ADDR3-W[0x00200000]:0x55555555,R:0x3caed5ec
ADDR3-W[0x00400000]:0x55555555,R:0x3caed5ec
ADDR3-W[0x00800000]:0x55555555,R:0x3caed5ec
ADDR3-W[0x01000000]:0x55555555,R:0x3caed5ec
ADDR3-W[0x02000000]:0x55555555,R:0x3caed5ec
ADDR3-W[0x04000000]:0x55555555,R:0x3caed5ec
ADDR3-W[0x08000000]:0x55555555,R:0x3caed5ec
ADDR3-W[0x10000000]:0x55555555,R:0x3caed5ec
AddrBus test failed!!!
Seems to fail in the second level in the boot process. Is there a hope I can unbrick it if I find the stock firmware?
Thanx
I f**ked up the stock firmware by trying to swap supeuser app with supersu and it stuck on boot logo animation. It just stays there for hours. Our device doesn't have a recovery and the only way to recover is with USB Burning Tool or Burn Card Maker. I had success flashing a rom made for X96 on it and booted sucessfully but there was no wifi. Next I tried several other roms and got mixed results like no sound or no wifi. If somebody has success with any rom for M96X MINI please share as I'm loosing hope that I will be able to fix it Also is there a way to extract working drivers for wifi from one rom and to import them to another ??
I managed to get the wifi working ! The wifi chip is HS2734A V15628 and I managed to install a rom from similar tv box with same SOC and wifi chip and this is the firmware that fixed my box --> s905xm82.M96X_MAX_7.1_2G_HS2734A_100M.2017.11.23.0 9.30
Good luck everybody !
Related
Hello folks. I have an intriguing brazilian tablet POSITIVO YPY_ABD10 and was wondering if it is possible to put some custom rom or custom recorevery or any other rom compatible on it and then try to change the rom because it comes in it is terrible.
I try to followed these tutorials here on forum:
//slatedroid.com/topic/40623-aml-flash-tool-aka-imageburntool/
//slatedroid.com/topic/41478-how-to-unbrick-your-amlogic-aml8726-mx-series-tablet-v20/
//slatedroid.com/topic/95977-howto-create-a-rescue-sd-card-for-pretty-much-every-amlogic-8726-mx-device/
and I try too some roms but so far no effective success... I think only worsened the situation somewhat for before he was "soft bricked" and now is "hard bricked" before I could get into recovery mode that came with him by pressing the "power + vol+" and now the sign of life he gives is when I press "power + vol-" and computer recognizes as "M3 CHIP", then I try burn some rom with the flash tool but still no success yet ...
Presentation of it ... ¬ ¬ '
//youtube.com/watch?v=tmqS-76l5r0
Specs:
Positivo YPY_ABD10
Operating System Android 4.0.4
Model Positivo YPY_AB10D
Processor ARM AMLOGIC @ 1.00 GHz
1 processor
Processor ID ARM implementer 65 architecture 7 variant 2 part 3081 revision 4
L1 Instruction Cache 0 KB
L1 Data Cache 0 KB
L2 Cache 0 KB
L3 Cache 0 KB
Motherboard f03ref_NX
BIOS
Memory 652 MB
-------------------------
CPU
Load Average: 3.00 3.01 3.17 1/664 3934
Processor: ARMv7 Processor rev4(v7L)
BogoMIPS: 655.36
Features: swp half thumb fastmult vfp edsp neon vfpv3
CPU Implementer: 0x41
CPU architecture: 7
CPU variant: 0x2
CPU part: 0xc09
CPU revision: 4
Hardware: AMLOGIC MESON3 8726M SKT SH
Revision: 0020
Serial: 000000000000000c
What are my options? Help me please. :help:
Thank you all. (Sorry my english)
Happy new year, in the first place!
Maybe i posted this in the wrong thread, due to my questions, i will try here..
I thought after reading and reading on inet...Gone try here to get a little bit further with a simple but brand new tablet i got from my mother.
That's also the reason why i don't throw it away, i thought lets see if there is a possibility to make it run better then with the stockrom.
And if there is no solution to flash it, what is the best way to backup the rockchip 3168 with 4.2.2 rom off the tablet itself?
Also to try other roms, i don't wane lose my bootloader etc.
Its a new tablet, but the hardware is older and because of that i thought lets see if i can get it maybe a little bit upgraded on the software side.
And if not, maybe another solution.
Therefore i searched a lot, but has anyone....Anyone maybe a direction to look for a maybe better rom.Also with cwm there is nothing what works with this chip, everything based on the maligpu400 or maybe also with the powerVr Sgx 540?
Other solution would be to backup the rom, and clean afterwards the stock rom.But i got stuck in how and what is the best way to do that.
I cant install Cwm recovery, when it installs it doesn't continue.
I also read that people lost their original bootloader, and because i cant find the stockrom online...What would be the best way to do that, i saw the app mtk, and the Rockchip tool but that seemed a lot off work and if i mess up my backup would never work.
Or is it the only way to back up this rom from Rockchip, a full backup kerel, loader etc..
And to try out a rom, install from sd card, and to get back on the stockrom a factory reset is all, or mess i up the recovery installing another rom?
If more info is needed about the chips, let me know.
Thanks ahead!
I will put the specs down here:
- System info droid -
Summery :
Brand name: Empire Electronix (Manufacture :Rockchip)
Device : Rockchip M1002B
Android :4.2.2
Processor : RK30board-ARMv7 Processor rev 0 (v7l)
Cpu Max Freq : 1200 Mhz
Cores : 2
System Ram : 1.00GB (Some apps say 1500mb)
Audio Chipset : Rk30sdk
Internal Storage : 1008Mb(132 mb free)
Internal SD : 8gb
GPU : Imagination Technologies PowerVR SGX 540
Display Size : 10.1inch - 1024x600Resolution
Screen Density : 90 ppi (160dpi)
Refresh Rate : 82.34 Hz
Back Camera : 1.9 MP(some apps : 2Mp)
Front Camera : 0.3 Mp
System :
Model : M1002B
Manufacture : Rockchip
Android : 4.2.2
Api Level : 17
Kernel : 3.0.36+20131118....
Compilation : V1.01.JDQ39...
Processor :
Processor : Rk30board
Instructions sets : armeabi-v7a, armeabi
Max Freq : 1200Mhz
Gpu :
Model : PowerVr SGX 540 + Output (Mini Hdmi 1920x1080)
Vendor : ITechnologies
OpenGL Version : OpenGL ES 2.0
Advanced Info:
Viewport size : 2048 x 2048
Sensor :
Freescale Semiconductor
Power C : 0.2mA
Max Range : 39.24
Resolution : 0.15328126
Other chips plus board descriptions :
RK30Board
Rockchip616
S-ilead GSL3680
uP6636Q-PGK38L
Wifi lost number of the chip, was realtek with tv in it.Must make new picture to find out but seemed pretty standard wifi Bgn chip.
Buttons : 3 - Power-Volume up/down
Ports : Mini USB2 OTG - Mini Hdmi(DD-DD5.1) - HeadphoneJack - Mic - MiniSD Card slot-
Rooted.
Roberto.
Were you able to figure this out?
I will try it and let you know if I have any problems? Thanks a lot.
Hello everybody,
I've spent lot of time looking for a custom ROM for my Maxell MID H8-S tablet.
Model: MID (on the box it reports H8-S)
CPU: ARMv7 rev0
GPU: Mali 400
RAM: 512 MB
Is there anyone who found something interesting..?
hello
i bought an Android TV Box
LPX-G BOX 2GB + 16GB Android 7.1
SDRAM: 2GB DDR3
Flash: 16GB EMMC Flash
CPU: 64 Bits AmlogicS905X Quad-Core [email protected]
GPU: Penta-Core Mali-450 mit HDMI 2.0 Ausgang Kartenleser: TF-Karten
i tried to flash another firmware for testing if it would work better than the original one.
i downloaded an firmware from the Magicsee IRON TV Box because the specs looks similar.
CPU – Amlogic S905X quad core ARM Cortex-A53 @ up to 2.0GHz
GPU – penta-core Mali-450MP GPU @ 750 MHz
SDRAM: 2GB DDR3
Flash: 16GB EMMC Flash
now i have a bootloop and it seems like the reset button have no function anymore, thats why USB_Burning_Tool don't recognize the box and i can't reflash the box
i have no idea how to fix the problem
What could i try?
http://www.bilder-upload.eu/show.php?file=fc8cf3-1510397037.jpg
http://www.bilder-upload.eu/show.php?file=870e01-1510397080.jpg
regards SajetS
did you repair this box ? i have similar box Name ABOX A1 Plus
http://www.bilder-upload.eu/show.php?file=1e8e58-1523219413.jpg
http://www.bilder-upload.eu/show.php?file=3c8443-1523219439.jpg
http://www.bilder-upload.eu/show.php?file=92aaf2-1523219452.jpg
http://www.bilder-upload.eu/show.php?file=581564-1523219466.jpg
http://www.bilder-upload.eu/show.php?file=7676ce-1523219476.jpg
Hello!
I`ve an issue with my android tv box.
WARINING : It will be a long detailed post.
First of all, I got my box like a month ago from aliexpress. Its an Magicsee iron s905x 2/8 box. I plugged in the box everything was working but after close examination the box had a "modified" firmware. Its was contacting some random site and I didn`t like that at all. So I start searching for custom firmware. First one I tried was s905x_2G_atvXperience_v2FF.img. I copied the image on a micro sd and went in recovery with the thoothpick method.
The image flashed but after like 10 minutes the display disapeared and the led on the board turned red. I did wait like 2 more hours in case something was going on in the background but nothing did happed. So i reseted the box and the 2 red light came back immediately and no display at all through hdmi. I did tryed to flash back the image with the thoothpick method but the reset button doesnt seems to do anything.
After a bit of research I decided to hook up through UART port. I then saw this was happening :
BL2 Built : 20:32:17, Sep 8 2017.
gxl g6296b83 - [email protected]
set vcck to 1120 mv
set vddee to 1000 mv
Board ID = 3
CPU clk: 1200MHz
DQS-corr enabled
DDR scramble enabled
STICKY_REG0: 0x00000000
STICKY_REG1: 0x00000000
STICKY_REG9: 0x00000000
DDR3 chl: Rank0+1 @ 792MHz - PASS
Rank0: 1024MB(auto)-2T-11
Rank1: 1024MB(auto)-2T-11
DataBus test pass!
AddrBus test pass!
-s
Load fip header from eMMC, src: 0x0000c200, des: 0x01400000, size: 0x00004000
New fip structure!
Load bl30 from eMMC, src: 0x00010200, des: 0x01100000, size: 0x0000d600
aml log : SIG CHK : 231 for address 0x01100000
reset...
Click to expand...
Click to collapse
this just keeps looping and looping. I even checked if the reset button had any impact on this and no. Nothing change. Im not an expert but I think the system doesnt boot far enough to consider the reset. Did some more researched to finally find the "short pin" method. I did that and some kind of progress :
U-Boot 2015.01 (Jul 13 2018 - 13:52:51)
DRAM: 2 GiB
Relocation Offset is: 76eb3000
register usb cfg[0][1] = 0000000077f5a928
[CANVAS]canvas init
vpu: error: vpu: check dts: FDT_ERR_BADMAGIC, load default parameters
vpu: clk_level = 7
vpu: set clk: 666667000Hz, readback: 666660000Hz(0x300)
vpu: vpu_clk_gate_init_off
vpp: vpp_init
boot_device_flag : 1
Nand PHY Ver:1.01.001.0006 (c) 2013 Amlogic Inc.
init bus_cycle=6, bus_timing=7, system=5.0ns
reset failed
get_chip_type and ret:fffffffe
get_chip_type and ret:fffffffe
chip detect failed and ret:fffffffe
nandphy_init failed and ret=0xfffffff1
MMC: aml_priv->desc_buf = 0x0000000073eb36b0
aml_priv->desc_buf = 0x0000000073eb59d0
SDIO Port B: 0, SDIO Port C: 1
emmc/sd response timeout, cmd8, status=0x1ff2800
emmc/sd response timeout, cmd55, status=0x1ff2800
init_part() 293: PART_TYPE_AML
[mmc_init] mmc init success
dtb magic 5f4c4d41
Amlogic multi-dtb tool
Multi dtb detected
Multi dtb tool version: v2 .
Support 2 dtbs.
aml_dt soc: gxl platform: p212 variant: 2g
dtb 0 soc: gxl plat: p212 vari: 1g
dtb 1 soc: gxl plat: p212 vari: 2g
Find match dtb: 1
start dts,buffer=0000000073eb8200,dt_addr=0000000073ec32 00
Amlogic multi-dtb tool
Multi dtb detected
Multi dtb tool version: v2 .
Support 2 dtbs.
aml_dt soc: gxl platform: p212 variant: 2g
dtb 0 soc: gxl plat: p212 vari: 1g
dtb 1 soc: gxl plat: p212 vari: 2g
Find match dtb: 1
parts: 10
00: logo 0000000002000000 1
01: recovery 0000000002000000 1
02: rsv 0000000000800000 1
03: tee 0000000000800000 1
04: crypt 0000000002000000 1
05: misc 0000000002000000 1
06: boot 0000000002000000 1
07: system 0000000080000000 1
08: cache 0000000020000000 2
09: data ffffffffffffffff 4
init_part() 293: PART_TYPE_AML
eMMC/TSD partition table have been checked OK!
check pattern success
mmc env offset: 0x27400000
In: serial
Out: serial
Err: serial
reboot_mode=cold_boot
hpd_state=0
cvbs performance type = 7, table = 0
[store]To run cmd[emmc dtb_read 0x1000000 0x40000]
_verify_dtb_checksum()-917: calc 2a4873b0, store 2a4873b0
_verify_dtb_checksum()-917: calc 2a4873b0, store 2a4873b0
dtb_read()-1039: total valid 2
dtb_read()-1106: do nothing
Amlogic multi-dtb tool
Multi dtb detected
Multi dtb tool version: v2 .
Support 2 dtbs.
aml_dt soc: gxl platform: p212 variant: 2g
dtb 0 soc: gxl plat: p212 vari: 1g
dtb 1 soc: gxl plat: p212 vari: 2g
Find match dtb: 1
card in
init_part() 278: PART_TYPE_DOS
[mmc_init] mmc init success
Device: SDIO Port B
Manufacturer ID: 27
OEM: 5048
Name: SD16G
Tran Speed: 50000000
Rd Block Len: 512
SD version 3.0
High Capacity: Yes
Capacity: 14.5 GiB
mmc clock: 40000000
Bus Width: 4-bit
[MSG]ini sz 0x25eB
[fat]Filesize is 0x25eB[0M]
[fat]0x:leftSz 25e < BPS 8000, gotSz 25e
ERR(../drivers/usb/gadget/v2_burning/v2_sdc_burn/optimus_ini_parser.c)L275:line 18 error: ini support at most 3 words, but 5
ERR(../drivers/usb/gadget/v2_burning/v2_sdc_burn/optimus_ini__aml_sdc_burn.c)L423:Fail in get cfg from aml_sdc_burn.ini
ERR(../drivers/usb/gadget/v2_burning/v2_sdc_burn/optimus_sdc_burn.c)L586:Fail to parse file aml_sdc_burn.ini
[MSG]to close image
[MSG]Reload bmps env.
Err imgread(L587):Logo header err.
osd not enabled
bmp - manipulate BMP image data
Usage:
bmp info <imageAddr> - display image info
bmp display <imageAddr> [x y] - display image at x,y
bmp scale [imageAddr scaleAddr] - scale image
ERR(../drivers/usb/gadget/v2_burning/v2_common/optimus_progress_ui.c)L143:Fail in run[bmp display 0xbe40ac0 ], bmpOffsetName=upgrade_fail_offset
[MSG]=====Burn Failed!!!!!
[MSG]PLS long-press power key to shut down
Click to expand...
Click to collapse
this is with official firmware from magicsee website : IRON S905X 20180727 upgrade.img
The 2 led turns blue but the box seems frozen that way. The remote button doesnt do anything. If I reboot the boot loops come back..
With all the other img I tried I got errors like ( poison rom, AtvXperience and IRON_s905x_aml_upgrade_package_20170630_SN.img )
BL2 Built : 13:48:56, Sep 23 2016.
gxl g7459bd4 - [email protected]
set vcck to 1120 mv
set vddee to 1000 mv
Board ID = 3
CPU clk: 1200MHz
DQS-corr enabled
DDR scramble enabled
DDR3 chl: Rank0+1 @ 912MHz - PASS
Rank0: 1024MB(auto)-2T-13
Rank1: 1024MB(auto)-2T-13
DataBus test pass!
AddrBus test pass!
Load fip header from SD, src: 0x0000c200, des: 0x01400000, size: 0x00004000
New fip structure!
Load bl30 from SD, src: 0x00010200, des: 0x01100000, size: 0x0000d600
Load bl31 from SD, src: 0x00020200, des: 0x10100000, size: 0x00015400
Load bl33 from SD, src: 0x00038200, des: 0x01000000, size: 0x000a8600
NOTICE: BL3-1: v1.0(debug):2e39a99
NOTICE: BL3-1: Built : 16:36:21, Sep 20 2016
aml log : bl31 normal boot !
[Image: gxl_v1.1.3154-065f772 2016-09-29 14:08:54 [email protected]]
OPS=0xc4
6 89 f4 a2 7b 2 9e 22 f3 37 bb 6f [2.020978 Inits done]
Wrong chip c0
GXL:BL1:9ac50e:bb16dc;FEAT:ADFC318C:0;POC:3;RCY:0; EMMC:400;NAND:82;SD:0;READ:0;0.0;CHK:0;
no sdio debug board detected
TE: 1628523
Click to expand...
Click to collapse
To limit the possible cause I tried with all these firmware :
iron s905x aml_upgrade_package.img (2017-09-23)
recovery.img
IRON S905X 20180727 upgrade.img
IRON_s905x_aml_upgrade_package_20170630_SN.img
IRON_s905x_android_7.1.2_20171125_upgrade_package.img
s905x_2G_atvXperience_v2FF.img
RedPoisonATV_V2_S905X.img
Click to expand...
Click to collapse
I've also tryed with multiple MicroSD card. Tryed to play with the SD card burner option .
As for USB burner, I was never able to get my device decoded. I did my own cable. When I short the pins I got a detection for like 2 sec and then it disapeared.
On my board I see MAGTV101-v2.2 2018-06-25.
I did try to google for like iron_s905x_aml_20180625.img but never found anything good using that :/
The only thing I haven`t done is removing the heatsink to check if its really a S905X.
So anything else I haven`t tryed? As I said im not an expert but this isn`t my first time playing around with devices. Im pretty sure my box isn't dead I just dont understand what exactly is wrong. If anyone can give my a bit of adivce so I could get this box back running i would greatly appreciate!
Thanks.
If this were my box, I would treat it like a horse with a broken leg.
Take out your gun and shoot it to put it out of misery