Related
When i turn off my phone, the battery logo shows up, and blinks every sec with a yellow triangle and a termostate bar. the only way to turn the phone on again is to remove battery, connect a usb cable, putt the battery back in, then hold power.
using lightningROm 1,4. tryed factory reset.
does a new battery solve this issue?
Obvious question but is the charger connected ,
What happens if you connect the charger .
jje
Same problem here. Factory reset or stock rom does not solve it.
the yellow triangle with termostat bar disappear when i connect charger.
when i connect charger while the phone is on is takes about 10 sek before the phone starts to charge, and when i disconect is takes 20 sek before the charging symbol dissappears.
when i connect to pc, windows tells me 0,1sek after i plugged that it doesent recoignize my device.
gonna try my friends battery later today.
dannydogg said:
the yellow triangle with termostat bar disappear when i connect charger.
when i connect charger while the phone is on is takes about 10 sek before the phone starts to charge, and when i disconect is takes 20 sek before the charging symbol dissappears.
NORMAL
when i connect to pc, windows tells me 0,1sek after i plugged that it doesent recoignize my device.
NO DRIVERS
I would be looking to return the phone if a factory reset has not solved the problem .
jje
Click to expand...
Click to collapse
i guess i have to return the phone then.
is there a way to put stock kernel and rom on the phone without usb, but use memorycard?
dont think the serviceplace is to happy with lightnig ROM
dannydogg said:
i guess i have to return the phone then.
is there a way to put stock kernel and rom on the phone without usb, but use memorycard?
dont think the serviceplace is to happy with lightnig ROM
Click to expand...
Click to collapse
I have the same problem :-(. Battery icon that says "battery full, disconnect cable" and the cable is unplugged! What to do?
One question, is your phone worked fine after flashing or the issue occurred just after ? Perhaps, you did a wrong flash process... and you have brick your phone.
In that case, you could buy USB JIB to be able to reboot in Odin mode and be able to flash again. This is the only solution I thing.
As i said before, same problem, also tried to flash stock rom but nothing
To the other with the same problem, if u go into settings-aboutphone- and then battery use.
What does it say?
mine says 0 seconds on battery :S
http://imageshack.us/photo/my-images/844/sc20110703204233.jpg
Tried wipe battery stats? I know someone with this small issue...
To do so into CWM 4, this is into advanced section.
bgn9000 said:
Tried wipe battery stats? I know someone with this small issue...
To do so into CWM 4, this is into advanced section.
Click to expand...
Click to collapse
Yes did try that to
One of my battery apps"battery Dr " says health= over voltage
Supposed to be that?
I am using battery widget monitor.
I can read the temperature (27 celcius), voltage around 4000 mV with 90%.
dannydogg said:
i guess i have to return the phone then.
is there a way to put stock kernel and rom on the phone without usb, but use memorycard?
dont think the serviceplace is to happy with lightnig ROM
Click to expand...
Click to collapse
Did u return it?
What did they say?
Cant get rid off the prolem either, must be a samsung bug!
Help please!!i've the same problem!
Afer a million usb connects in downloadmode, odin suddenly recognized my phone.
flashed CFroot 4,0 and villain rom 1,4 and my phone was ok!
USB mass storage, and kies usb worked fine, and my phone stayed off when i turned it off.
but next time i charged my phone (orginal charger) my phone started to bug again. it stays off, but USB dont work in android. but download mode works.
dont want to flash the phone every time i charge...
I've the same problem...
does anyone resolve that???
i don't want return it to samsung..let me know!!!
i had a similar issue with my sgs1 .. turned out to be that the phone's usb port had some kind of rust ( which messed up the internal connectors of the usb port signaling the charging or connected to usb icons ) and had to send it in for repairs and they just replaced the usb port. i guess it was from humidity.
btw my phone never made any contact with water so i was surprised that that was the problem
I was flashing from MIUI 1.9 to MIUI ICS in CWM and all seemed well until upon boot it hung on the MIUI bootup screen. After waiting about 15 minutes I figured I would simply ODIN back to stock and try again as I normally do when I have a problem flashing. In ODIN however I was unable to make it past the boot.inf stage of the flashing. Stupidly I unplugged the usb cable mid flash and tried again, and again same result, it would hang at boot.inf. After trying a couple different stock ODIN files the phone will not turn on at all. Even if I pull the battery and connect the phone to the pc I cannot boot into download mode. When I connect to the wall charger the battery screen does not come on either.
Strangely if I press the power button on the phone with the phone connected to the pc, windows will make the sound of a usb device being connected, however, if I release the power button it makes the sound of a usb device being disconnected. ODIN does not seem to be recognizing my phone anymore since I haven't been able to boot into download mode.
I've bought a usb jib hoping this would solve the problem but it hasn't seemed to work. Maybe I'm doing something wrong.
Please someone help me get my phone up and running again. I've flashed numerous roms before and had trouble but nothing as serious as this.
Try reading up on Droidstyles Guide . Its in General section .
Sent from my SCH-I500 using xda app-developers app
Thanks for that. I went through his guide but unfortunately I think my problem is a little more serious. My phone will not turn on at all. I cannot boot into CWM, download mode or boot normally. The screen just remains black. It doesn't show up as a recognized device in windows but when I connect the usb cable it makes a sound of it being connected.
If any has any ideas on things I could try I would be really grateful. I bought my phone out of contract and can't really afford to buy a new one right now.
iztel said:
Thanks for that. I went through his guide but unfortunately I think my problem is a little more serious. My phone will not turn on at all. I cannot boot into CWM, download mode or boot normally. The screen just remains black. It doesn't show up as a recognized device in windows but when I connect the usb cable it makes a sound of it being connected.
If any has any ideas on things I could try I would be really grateful. I bought my phone out of contract and can't really afford to buy a new one right now.
Click to expand...
Click to collapse
Can you "3 finger" into recovery ?
Sent from my SCH-I500 using xda app-developers app
No, when I try to use the 3 buttons to boot into recovery the screen stays black.
Another strange thing it's doing is when I connect the phone to my Mac with the SD card in the phone the Mac will continuously popup a window that asks whether I want to connect the usb device to the Mac or my virtual machine. It flashes so fast I'm unable to click either option. If I connect the phone without the SD card in this menu never comes up but I'm still unable to boot into download mode.
Hmm....I've never heard this before...have you tried plugging phone charger in ( wall outlet ) and let it charge 8 full hours
Sent from my SCH-I500 using xda app-developers app
You say you bought " out of contract", from a private seller ? No warranty?
Sent from my SCH-I500 using xda app-developers app
I charged it from the wall charger overnight still no luck. Yeah, I bought it a year and a half ago used from ebay. I think it's really strange too. I've had plenty of hiccups flashing roms before but it's never been something ODIN couldn't fix and I'd at least be able to get into download mode.
I think you are going to have to use UnbrickableMod.
Thanks MM. I bit the bullet and bought a used Galaxy S II. I may still try that unbrickable mod so I can give my Fassy to my mom who's overdue for a smartphone. I've never used a soldering iron though and not too certain how successful I'll be.
iztel said:
Thanks MM. I bit the bullet and bought a used Galaxy S II. I may still try that unbrickable mod so I can give my Fassy to my mom who's overdue for a smartphone. I've never used a soldering iron though and not too certain how successful I'll be.
Click to expand...
Click to collapse
Have you tried the wall plug trick?
I had been running a Fascinate rom on a Showcase for almost a year & the same thing happened to me. Initially, the battery had run completely down and after full charge, I had nothing but bootloops. At first I could connect via odin, but could not complete flash.
After messing with it & yanking out the cable as you did, I had same issue, blank screen, pc would beep but that was it, pc/odin would not recognize or show the comm port. I would get unknown device.
Ultimately, I successfully repartitioned & odined a stock Fascinate Froyo EB01 rom by doing several things -- not sure which worked, but perhaps might work for you rather than soldering
First, I fully charged an oem battery using a spare battery charger (not in the fassy)
After charge, I put the batt in the fasc & plugged the fasc in to the wall charger while holding down the volume button & got the download mode to show up.
I left batt in when I unplugged from wall & the download mode stuck.
Odin still didnt recognize on my laptop, so I tried 3 other machines till I Odin finally saw the fascinate, at which point I odined Froyo with .pit & repartitioning as my starting point, then clockworked & rooted etc. I think I left battery in during the flash, then reflashed later in download mode with battery out.
I was also successful using heimdall a few times, when another pc wasn't available & odin wasn't playing nice. Was very odd, as 2 of those laptops ALWAYS worked fine with odin & the fascinated showcase before. Now they still won't recognize, but I can easily odin if I try diff computers --- some windows 7 some xp & some vista.
Magickly said:
Have you tried the wall plug trick?
I had been running a Fascinate rom on a Showcase for almost a year & the same thing happened to me. Initially, the battery had run completely down and after full charge, I had nothing but bootloops. At first I could connect via odin, but could not complete flash.
After messing with it & yanking out the cable as you did, I had same issue, blank screen, pc would beep but that was it, pc/odin would not recognize or show the comm port. I would get unknown device.
Ultimately, I successfully repartitioned & odined a stock Fascinate Froyo EB01 rom by doing several things -- not sure which worked, but perhaps might work for you rather than soldering
First, I fully charged an oem battery using a spare battery charger (not in the fassy)
After charge, I put the batt in the fasc & plugged the fasc in to the wall charger while holding down the volume button & got the download mode to show up.
I left batt in when I unplugged from wall & the download mode stuck.
Odin still didnt recognize on my laptop, so I tried 3 other machines till I Odin finally saw the fascinate, at which point I odined Froyo with .pit & repartitioning as my starting point, then clockworked & rooted etc. I think I left battery in during the flash, then reflashed later in download mode with battery out.
I was also successful using heimdall a few times, when another pc wasn't available & odin wasn't playing nice. Was very odd, as 2 of those laptops ALWAYS worked fine with odin & the fascinated showcase before. Now they still won't recognize, but I can easily odin if I try diff computers --- some windows 7 some xp & some vista.
Click to expand...
Click to collapse
I had the same issue. I think it had to do with the battery being too low. I think that ODIN could have a check in place to allow only to flash if the battery is not clos to low in case things go wrong. I had a second fully charged battery and when i read the above post, i changed the battery across and it set it to download and ODIN eventually detected it. Thanks for the help guys.
I have a similar problem, I was on PA JB rom 2.18, and I decided to flash latest devil kernel [1.5.2? or something like that]
so then it would just boot into devil recovery. and that's all. Tried to flash pa rom over it [to get stock recovery back] but it failed. also it had lots of errors about mounting.
So I did advanced restore, and chose to restore boot from other JB backup. This just made it worse, bootlooping into an android recovery with a "!" triangle, then immediately rebooting, over and over again..
So I put into download mode, and heimdall a boot.img extracted from the JB rom [paranoid android], and it still didn't work right.
So then I heimdall'ed the atlas.2.2.pit, thinking the partition was screwed. Then I was booted into cwm 6.x! So I thought I was out of the woods, and wiped, then flashed PA 2.18 jb rom, and then rebooted.. and then I had no samsung logo bootloop. I could tell cuz it was dark, and I could see the backlight coming on and off. on, off... on... off... endlessly.
I tried download mode, and it didn't work. That's when I got scared.. I tried it again, nothing. just the black [very dim black, because of super amoled technology] screen, coming on and off..
So I finally tried taking the battery out, and then it went into download mode!
But I still cannot figure out why it will not let me flash any rom. I'm gonna have to boot into windows and odin back to EH03.
Good thing I have a 3-4 day old backup.
So, do not use devil kernel unless you want a softbrick.
mvmacd said:
I have a similar problem, I was on PA JB rom 2.18, and I decided to flash latest devil kernel [1.5.2? or something like that]
so then it would just boot into devil recovery. and that's all. Tried to flash pa rom over it [to get stock recovery back] but it failed. also it had lots of errors about mounting.
So I did advanced restore, and chose to restore boot from other JB backup. This just made it worse, bootlooping into an android recovery with a "!" triangle, then immediately rebooting, over and over again..
So I put into download mode, and heimdall a boot.img extracted from the JB rom [paranoid android], and it still didn't work right.
So then I heimdall'ed the atlas.2.2.pit, thinking the partition was screwed. Then I was booted into cwm 6.x! So I thought I was out of the woods, and wiped, then flashed PA 2.18 jb rom, and then rebooted.. and then I had no samsung logo bootloop. I could tell cuz it was dark, and I could see the backlight coming on and off. on, off... on... off... endlessly.
I tried download mode, and it didn't work. That's when I got scared.. I tried it again, nothing. just the black [very dim black, because of super amoled technology] screen, coming on and off..
So I finally tried taking the battery out, and then it went into download mode!
But I still cannot figure out why it will not let me flash any rom. I'm gonna have to boot into windows and odin back to EH03.
Good thing I have a 3-4 day old backup.
So, do not use devil kernel unless you want a softbrick.
Click to expand...
Click to collapse
I think the problem is you used the wrong Devil... the latest is 1.6.1 and the older ones will not work with the new partition layout. Get it from http://rootaxbox.no-ip.org/derteufel/
Here is some FYI for you guys. If you are using a pc with a USB 2.0 or higher then it provides the power to go into download mode for Odin. That's why people say to remove the battery and then plug in the USB cable and hold the volume and power to go into download mode for odin. IF you are using a desktop then it's best to use one of the hardwired usb ports on the back of your pc, if it's a laptop then they are all hardwired to the motherboard. USB 2.0 and up all provide power through the usb port, therefore if you leave the battery in while Odin'ing it may not be a good outcome, this is just a suggestion.
netlagger said:
Here is some FYI for you guys. If you are using a pc with a USB 2.0 or higher then it provides the power to go into download mode for Odin. That's why people say to remove the battery and then plug in the USB cable and hold the volume and power to go into download mode for odin. IF you are using a desktop then it's best to use one of the hardwired usb ports on the back of your pc, if it's a laptop then they are all hardwired to the motherboard. USB 2.0 and up all provide power through the usb port, therefore if you leave the battery in while Odin'ing it may not be a good outcome, this is just a suggestion.
Click to expand...
Click to collapse
You are suggesting we leave the battery out while Odining? what good would that do?
mvmacd said:
You are suggesting we leave the battery out while Odining? what good would that do?
Click to expand...
Click to collapse
I always Odin without battery. Try it. Remove battery, connect to PC with Odin opened, hold volume down button for dl mode, and fash.
Sent from my SCH-I500 using xda premium
mezster said:
I always Odin without battery. Try it. Remove battery, connect to PC with Odin opened, hold volume down button for dl mode, and fash.
Sent from my SCH-I500 using xda premium
Click to expand...
Click to collapse
Yet again, I ask, what good would taking the battery out?
I'd have to set it and the cover down and put them back after Odin..
Sent from my Nexus 7 using xda app-developers app
mvmacd said:
Yet again, I ask, what good would taking the battery out?
I'd have to set it and the cover down and put them back after Odin..
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
It's probably just a precaution so you don't accidentally reboot the phone while flashing or something like that. Every guide I have read says to pull battery before using Odin so I do... and I haven't had any problems. I think it'll probably work fine with the battery in, but why bother taking the risk?
Crawshayi said:
It's probably just a precaution so you don't accidentally reboot the phone while flashing or something like that. Every guide I have read says to pull battery before using Odin so I do... and I haven't had any problems. I think it'll probably work fine with the battery in, but why bother taking the risk?
Click to expand...
Click to collapse
how would the battery cause the phone to reboot?
I have never Odin'd without the battery. And I never had any problems
hello everybody,
i used to be active on the x10 forum.
but recently i switched to xperia P.
i unlocked the bootloader,
used fastboot to flash custom boot.img,
fastbooted custom kernel (FreeXperia),
installed cm10.zip with the CWM included in kernel,
everything works except wifi and bluetooth (which i guess is the rom's fault, so i dont really mind)
and then i installed apps from the cm10 file manager.
it detects my 16gb internal memory.
but my titanium backup and some other apps says it cannot access my internal memory, so it doesnt show any apps. (usb is disconnected)
so i thought mayybe some apps dont have access, so i thought i should mount my internal memory (although it already works for my cm10 file manager).
that was a very stupid decision because i used this code from this website which i got after i googled and used it on my terminal emulator.
guess what happened? my device got stuck/hang/frozen.
then when i pressed the power button, it was totally blank, no response and the screen went off.
i tried force shutdown by pressing and holding the volume-up & power button at the same time for a long time, that didnt work either, it had no effect, there was not even a vibration.
and when i charge it, there is no charging light.
it doesnt boot, it doesnt show me the kernel screen, or the CWM screen.
this is worse than a bootloop.
anyone who has previous experience with this?? or has a suggestion on how to repair?
any advice will be much appreciated :crying:
Devin-J said:
hello everybody,
i used to be active on the x10 forum.
but recently i switched to xperia P.
i unlocked the bootloader,
used fastboot to flash custom boot.img,
fastbooted custom kernel (FreeXperia),
installed cm10.zip with the CWM included in kernel,
everything works except wifi and bluetooth (which i guess is the rom's fault, so i dont really mind)
and then i installed apps from the cm10 file manager.
it detects my 16gb internal memory.
but my titanium backup and some other apps says it cannot access my internal memory, so it doesnt show any apps. (usb is disconnected)
so i thought mayybe some apps dont have access, so i thought i should mount my internal memory (although it already works for my cm10 file manager).
that was a very stupid decision because i used this code from this website which i got after i googled and used it on my terminal emulator.
guess what happened? my device got stuck/hang/frozen.
then when i pressed the power button, it was totally blank, no response and the screen went off.
i tried force shutdown by pressing and holding the volume-up & power button at the same time for a long time, that didnt work either, it had no effect, there was not even a vibration.
and when i charge it, there is no charging light.
it doesnt boot, it doesnt show me the kernel screen, or the CWM screen.
this is worse than a bootloop.
anyone who has previous experience with this?? or has a suggestion on how to repair?
any advice will be much appreciated :crying:
Click to expand...
Click to collapse
I think you've posted in the wrong forum - should be in Q/A.
Is your phone able to detect in flash mode? (while it is off, hold DOWN volume key and connect USB - check for LED illuminated)
Is your phone able to detect in fastboot mode? (while it is off, hold UP volume key and connect USB - check for LED illuminated PURPLE)
WizaJ said:
I think you've posted in the wrong forum - should be in Q/A.
Is your phone able to detect in flash mode? (while it is off, hold DOWN volume key and connect USB - check for LED illuminated)
Is your phone able to detect in fastboot mode? (while it is off, hold UP volume key and connect USB - check for LED illuminated PURPLE)
Click to expand...
Click to collapse
looks like you have to shut down your device first IF it is not shuted down
http://forum.xda-developers.com/showpost.php?p=42270725&postcount=798
Devin-J said:
hello everybody,
i used to be active on the x10 forum.
but recently i switched to xperia P.
i unlocked the bootloader,
used fastboot to flash custom boot.img,
fastbooted custom kernel (FreeXperia),
installed cm10.zip with the CWM included in kernel,
everything works except wifi and bluetooth (which i guess is the rom's fault, so i dont really mind)
and then i installed apps from the cm10 file manager.
it detects my 16gb internal memory.
but my titanium backup and some other apps says it cannot access my internal memory, so it doesnt show any apps. (usb is disconnected)
so i thought mayybe some apps dont have access, so i thought i should mount my internal memory (although it already works for my cm10 file manager).
that was a very stupid decision because i used this code from this website which i got after i googled and used it on my terminal emulator.
guess what happened? my device got stuck/hang/frozen.
then when i pressed the power button, it was totally blank, no response and the screen went off.
i tried force shutdown by pressing and holding the volume-up & power button at the same time for a long time, that didnt work either, it had no effect, there was not even a vibration.
and when i charge it, there is no charging light.
it doesnt boot, it doesnt show me the kernel screen, or the CWM screen.
this is worse than a bootloop.
anyone who has previous experience with this?? or has a suggestion on how to repair?
any advice will be much appreciated :crying:
Click to expand...
Click to collapse
Hi.
1. Have you tried to charge it through the charger, instead of the usb por of PC?
2. If you tried, did you let it charge for at least 30 minutes? (Sometimes the battery drains so much that the phone needs time even to show it´s charging.)
If the battery charges, you should try flashing a Stock Rom through Flashtools.
If it doesn´t, then I can´t say you should do it but if I were in ur position, I would surely open my phone and try to charge this battery somehow. Google a lot to learn how it works, the wires, what is positive and negative and bla bla bla because your biggest problem NOW is not having power to work with the phone.
Hope you have good luck!
=)
Sorry please post your thread at Q&A
Devin-J said:
hello everybody,
i used to be active on the x10 forum.
but recently i switched to xperia P.
i unlocked the bootloader,
used fastboot to flash custom boot.img,
fastbooted custom kernel (FreeXperia),
installed cm10.zip with the CWM included in kernel,
everything works except wifi and bluetooth (which i guess is the rom's fault, so i dont really mind)
and then i installed apps from the cm10 file manager.
it detects my 16gb internal memory.
but my titanium backup and some other apps says it cannot access my internal memory, so it doesnt show any apps. (usb is disconnected)
so i thought mayybe some apps dont have access, so i thought i should mount my internal memory (although it already works for my cm10 file manager).
that was a very stupid decision because i used this code from this website which i got after i googled and used it on my terminal emulator.
guess what happened? my device got stuck/hang/frozen.
then when i pressed the power button, it was totally blank, no response and the screen went off.
i tried force shutdown by pressing and holding the volume-up & power button at the same time for a long time, that didnt work either, it had no effect, there was not even a vibration.
and when i charge it, there is no charging light.
it doesnt boot, it doesnt show me the kernel screen, or the CWM screen.
this is worse than a bootloop.
anyone who has previous experience with this?? or has a suggestion on how to repair?
any advice will be much appreciated :crying:
Click to expand...
Click to collapse
Hi my friend.
i had this problem 6 month later
it happened because battery is 0% i opened its back door and use a special charger that can be use to charging any battery ( has 2 wire to connect to any battery ) after 3 min charge ( to charge i disconnected battery socket and connected wires to socket) i connected battery and close back door and go to flash mode and flashed stock rom.
and Done.
if you have any problem PM me.
sorry for my english.
WizaJ said:
Is your phone able to detect in flash mode? (while it is off, hold DOWN volume key and connect USB - check for LED illuminated)
Is your phone able to detect in fastboot mode? (while it is off, hold UP volume key and connect USB - check for LED illuminated PURPLE)
Click to expand...
Click to collapse
the phone doesnt respond to anything
aftergr said:
looks like you have to shut down your device first IF it is not shuted down
http://forum.xda-developers.com/showpost.php?p=42270725&postcount=798
Click to expand...
Click to collapse
i have reason to believe it maybe related to the battery. maybe the battery is still running. how do i physically shut it down? the holding power button and volkume-up button trick doesnt work.
zilian28 said:
1. Have you tried to charge it through the charger, instead of the usb por of PC?
2. If you tried, did you let it charge for at least 30 minutes? (Sometimes the battery drains so much that the phone needs time even to show it´s charging.)
If the battery charges, you should try flashing a Stock Rom through Flashtools.
If it doesn´t, then I can´t say you should do it but if I were in ur position, I would surely open my phone and try to charge this battery somehow.
=)
Click to expand...
Click to collapse
i tried plugging it in for hours, no response. could you tell me what equipment do i need to remove the casing and charge the battery?
Xperia_Fans said:
Sorry please post your thread at Q&A
Click to expand...
Click to collapse
sorry, i moved it there
copper62472 said:
Hi my friend.
i had this problem 6 month later
it happened because battery is 0% i opened its back door and use a special charger that can be use to charging any battery ( has 2 wire to connect to any battery ) after 3 min charge ( to charge i disconnected battery socket and connected wires to socket) i connected battery and close back door and go to flash mode and flashed stock rom.
and Done.
Click to expand...
Click to collapse
thanks, you give me hope. so what equipment did u use? i'll pm u
In my opinion ders something wrong with the partitioning when you entered the command....
Try looking into that direction.
Im no expert just a suggestion...
Devin-J said:
the phone doesnt respond to anything
i have reason to believe it maybe related to the battery. maybe the battery is still running. how do i physically shut it down? the holding power button and volkume-up button trick doesnt work.
i tried plugging it in for hours, no response. could you tell me what equipment do i need to remove the casing and charge the battery?
sorry, i moved it there
thanks, you give me hope. so what equipment did u use? i'll pm u
Click to expand...
Click to collapse
Use this guide to open the phone up and just disconnect the battery for a few minutes. Then try connecting in either fastboot/flash mode. The phone may need to be repartitioned and reflashed.
Same issue
Hi Davin-J
Did you finally solved this problem? I have the same now. And my battery should be good.
...............................
1/2 day later:
It was the battery. I managed to get it back to life as copper62472 told us. The strange thing was, that the Sony charger didn't charge the phone battery; may be because I bricked the phone before with system/data/cache wiped and formatted. I was not even able to restore it with SUS, because the phone was not detected at the USB.
Then I charged the battery outside the phone with a current limited power supply. After putting the charged battery back into the phone, restoring with SUS worked without a hitch.
Help
schmeißfliege said:
Hi Davin-J
Did you finally solved this problem? I have the same now. And my battery should be good.
...............................
1/2 day later:
It was the battery. I managed to get it back to life as copper62472 told us. The strange thing was, that the Sony charger didn't charge the phone battery; may be because I bricked the phone before with system/data/cache wiped and formatted. I was not even able to restore it with SUS, because the phone was not detected at the USB.
Then I charged the battery outside the phone with a current limited power supply. After putting the charged battery back into the phone, restoring with SUS worked without a hitch.
Click to expand...
Click to collapse
My xperia p is also in dead condition now. I'm thinking like it's battery is fully drained. It all started with flashing of a custom kernel.
i could take the battery out. i need to charge it by external means. How can i do that? Please help me.
So yesterday morning I went to turn on my phone, but nothing happened. It was on the charger all night so it should have been a full battery.
Here are my symptoms:
1) AC plugged in without battery - Phone's screen turns on for a second, turns off, and then repeats.
2) AC plugged in with battery - Phone will start to charge (has the loading symbol in the battery), but then turns off immediately. It cannot boot into recovery. It CAN boot into download mode, but my computer will not recognize it to restore the phone with odin.
Any ideas?
I don't have an official upgrade until October, but I'm going to call customer service to try and get them to bump the date up so I can get a new phone.
First possibility to suspect is a failed battery. If you know someone else with an s2, ask to borrow their battery temporarily to see if your phone will boot. Or perhaps go to an AT&T store to see if you can borrow a battery.
If it's not the battery, then the next step to try is to boot into download mode with the battery out of the phone to see if Odin will recognize the phone with the battery out. With the battery out of the phone and the USB cable plugged into the computer, hold down the vol down button while plugging the USB cable into the phone. The computer will supply the power. This assumes that you have the proper "Samsung USB driver for mobile phones" installed on your PC.
That's a start.
I am having the same issue with my s2. i had shostock installed on it a few weeks back and it was working fine. then it just stopped working. i tried rebooting but it keeps on going on bootloops. I tried using odin to flash back to stock but no go, just bootloops. kies just dont work for me. i know it isnt the battery cuz i have the charging cradle to charge the battery and the phone goes to odin mode without the battery. Any help is appreciated.
sfb14 said:
I am having the same issue with my s2. i had shostock installed on it a few weeks back and it was working fine. then it just stopped working. i tried rebooting but it keeps on going on bootloops. I tried using odin to flash back to stock but no go, just bootloops. kies just dont work for me. i know it isnt the battery cuz i have the charging cradle to charge the battery and the phone goes to odin mode without the battery. Any help is appreciated.
Click to expand...
Click to collapse
It sounds like you got a successful flash of stock. Boot into recovery and perform a wipe data/factory reset.
creepyncrawly said:
It sounds like you got a successful flash of stock. Boot into recovery and perform a wipe data/factory reset.
Click to expand...
Click to collapse
I just did. Still no boot.
sfb14 said:
I just did. Still no boot.
Click to expand...
Click to collapse
OK. Did the flash to stock succeed? In other words, you got a pass in odin?
Which version of SHOstock was installed, the latest? And which version of stock did you flash?
i flashed SHOstock v3 before all of this happened. i flashed ucle5 stock rooted. battery icon flashes capacitive keys blink over and over again. if i unplug it nothing happens. i may have to try UCKH7 once im done downloading it.
** after flashing KH7, i go to recovery to wipe/factory reset... there is a message saying
Installing Multi-CSC...
"can't access to '/system/csc/ATT/system/'
Successfully applied multi-CSC
sfb14 said:
i flashed SHOstock v3 before all of this happened. i flashed ucle5 stock rooted. battery icon flashes capacitive keys blink over and over again. if i unplug it nothing happens. i may have to try UCKH7 once im done downloading it.
** after flashing KH7, i go to recovery to wipe/factory reset... there is a message saying
Installing Multi-CSC...
"can't access to '/system/csc/ATT/system/'
Successfully applied multi-CSC
Click to expand...
Click to collapse
This is sounding a bit like nand read/write corruption, which is fixable. Try this:
1)Go to this post and download the Tar version of Siyah 2.6.14 Kernel. Flash it in PDA without ticking Re-Partitioning.
2) Successful? Nice. Next, flash the full stock Gingerbread distribution from the Download Repository, I777UCKH7 including the bootloaders and everything, in the PDA slot.
3) If that is successful and boots normally you are done. If it is not, then:
4) Download the SBL Bootloader from the Download Repository. Flash it as PDA in ODIN, without ticking Re-Partitioning.
5) Flash the Kernel, as in step 1.
6) Flash the full stock Gingerbread distribution, as in step 2.
Will try that later. Thanks for your help!
Sent from my SAMSUNG-SGH-I337 using xda premium
still no luck.. i did everything odin says "PASS" but it just wont boot. i'm going to try and get a different battery and see if that works.
thanks for your help sir. :good:
sfb14 said:
still no luck.. i did everything odin says "PASS" but it just wont boot. i'm going to try and get a different battery and see if that works.
thanks for your help sir. :good:
Click to expand...
Click to collapse
Going through the exact same issue with my kids phone with the same results. Tried creepy's 6 steps, but still no luck.
I think it was caused by my kid killing the battery.
update: got it to boot into custom recovery, then reflashed ROM. It stills acts weird though. Very laggy.
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-ii-at-t-usb-port-repair/
Sent from my SGH-I777 using xda app-developers app
Having a very similar issue here.. Battery icon flashes then black screen. Boot to download mode.. Push up arrow, black screen. Computer does not register device connected.
Sent from my SGH-I997 using xda app-developers app
jvick920 said:
Having a very similar issue here.. Battery icon flashes then black screen. Boot to download mode.. Push up arrow, black screen. Computer does not register device connected.
Sent from my SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
It's hard to give any suggestions with this little information. More information would be useful. A lot more information would be more helpful.
creepyncrawly said:
It's hard to give any suggestions with this little information. More information would be useful. A lot more information would be more helpful.
Click to expand...
Click to collapse
When I plug then phone in (automatically turns on when plugged in, power button is broken), the battery logo and hardware buttons flash erratically for up to a minute then nothing at all. I've tried different batteries and different cords. The only thing that seems to bring it back to life is letting the phone and battery sit unplugged for 2 weeks up to a month and trying again, but it's very hit or miss. This only seems to happen when the battery completely drains.
jvick920 said:
When I plug then phone in (automatically turns on when plugged in, power button is broken), the battery logo and hardware buttons flash erratically for up to a minute then nothing at all. I've tried different batteries and different cords. The only thing that seems to bring it back to life is letting the phone and battery sit unplugged for 2 weeks up to a month and trying again, but it's very hit or miss. This only seems to happen when the battery completely drains.
Click to expand...
Click to collapse
What phone do you have... the AT&T SGH-I777 does not have hardware buttons, but maybe you mean the capacitive buttons which are part of the display? Your previous post was sent from an Infuse? If it's not an I777 then you need a different forum.
If the phone that has the problem is an SGH-I777, then... what firmware is/was it running? Is it rooted? Is USB debugging turned on? Have you been able to boot into download mode since your first post? How long was the power button broken before this problem first manifested?
I think you need to get into download mode and flash stock firmware.
You also may need to see if you can do something about the broken power button, since that may be involved in the problem. That would mean either taking the phone apart and trying to mechanically clean the button or move/press/activate it a lot to get the dirt out so that the problem clears itself, or it may mean getting it replaced.
creepyncrawly said:
What phone do you have... the AT&T SGH-I777 does not have hardware buttons, but maybe you mean the capacitive buttons which are part of the display? Your previous post was sent from an Infuse? If it's not an I777 then you need a different forum.
If the phone that has the problem is an SGH-I777, then... what firmware is/was it running? Is it rooted? Is USB debugging turned on? Have you been able to boot into download mode since your first post? How long was the power button broken before this problem first manifested?
I think you need to get into download mode and flash stock firmware.
You also may need to see if you can do something about the broken power button, since that may be involved in the problem. That would mean either taking the phone apart and trying to mechanically clean the button or move/press/activate it a lot to get the dirt out so that the problem clears itself, or it may mean getting it replaced.
Click to expand...
Click to collapse
It is the I777, capacitive buttons is what I meant.. I apologize, I'm still fairly new with terminology.. Yes, I have an Infuse also, it's my backup phone because I can't get the s2 to charge. It is rooted and flashed, running 4.2.2 (Avatar ROM)
The problem is, it isn't holding enough of a charge to do anything. Aside from the previously stated issue, it will go into download mode, but the screen will only stay on for maybe 5 seconds max. The power button has been broken about 6 months before this issue arose. This only started happening about a month ago when I let the battery discharge completely. To test my theory that it's a battery/charging issue, I got a backup battery (which allowed the phone to work again) and I allowed that one to discharge completely. Now I'm having the same issue with both batteries. I was able to get the phone to power on once after letting the phone and battery sit disconnected for about 2 weeks.
jvick920 said:
It is the I777, capacitive buttons is what I meant.. I apologize, I'm still fairly new with terminology.. Yes, I have an Infuse also, it's my backup phone because I can't get the s2 to charge. It is rooted and flashed, running 4.2.2 (Avatar ROM)
The problem is, it isn't holding enough of a charge to do anything. Aside from the previously stated issue, it will go into download mode, but the screen will only stay on for maybe 5 seconds max. The power button has been broken about 6 months before this issue arose. This only started happening about a month ago when I let the battery discharge completely. To test my theory that it's a battery/charging issue, I got a backup battery (which allowed the phone to work again) and I allowed that one to discharge completely. Now I'm having the same issue with both batteries. I was able to get the phone to power on once after letting the phone and battery sit disconnected for about 2 weeks.
Click to expand...
Click to collapse
What firmware is/was it running?
Is it rooted?
Is USB debugging turned on?
Did it charge the second battery fully more than once?
How long did it operate with the second battery?
creepyncrawly said:
What firmware is/was it running?
Is it rooted?
Is USB debugging turned on?
Did it charge the second battery fully more than once?
How long did it operate with the second battery?
Click to expand...
Click to collapse
Firmware is CM 10.1, it is rooted, running AvatarROM. USB debugging and mock locations were turned on. It had no issue charging while it was working, it was after I allowed the batteries to die that I started having issues. Even on the second battery, it would continue operating as long as I kept it charged.
jvick920 said:
Firmware is CM 10.1, it is rooted, running AvatarROM. USB debugging and mock locations were turned on. It had no issue charging while it was working, it was after I allowed the batteries to die that I started having issues. Even on the second battery, it would continue operating as long as I kept it charged.
Click to expand...
Click to collapse
I have never used Cyanogen Mod or any of the other AOSP firmware, and I don't know how the firmware would affect this issue, if at all. But I suspect there may be some link.
I think what you need to do is to flash back to stock firmware, or perhaps use one of the stock plus root packages, and then a custom kernel, and then reload CM 10.1. So try this:
Pull the battery and leave it out. Open Odin3 on the desktop and then while holding down the volume buttons, plug in the usb cable. See if the phone will boot into download mode this way, and if Odin will recognize it. If so, then go ahead and flash the stock of your choosing. I think if it were me, I would flash 4.0.4 UCLL6 plus root.
yesterday i went from citrus to slimrom. Dont know what caused this, but I havent found anyone else with this problem when i tried to search for it.
This is what I have found out:
1. If I connect my charger when the phone is on, nothing happens (cant seem to connect it to the computer either..).
2. If i reboot it with charging cable in. it hangs with the "blinking red light".
I can reboot it by unplugging the charger and pressing power button a couple of times.
3. If I reboot it and let it boot to mi-logo, I can connect charger and it will charge.
This is the only way I have found it to charge: reboot, wait until logo and then connect charger, it will charge every time. Never if I connect it when the phone is booted).
Anyone know how to fix it, the phone works perfectly otherwise.
I have tried this:
installed CM 13, with cm 13 firmware.
installed Citrus again.
Installed exodus MM-rom.
nothing changes this.
The phone came with unlocked bootloader when I bought it from ebay, guess it is unofficially unlocked? Any way to check if its unofficially or officially unlocked? does it matter?
Sounds very similar to what happened to me and it was because the bootloader somehow locked itself again. I just plugged it back into my computer and unlocked it again.
Thanks, but when I try to unlock it with mi unlock tool, it says "couldn´t verify device, no need to unlock"...
I can enter twrp, is my device still locked but I can enter recovery?
Update: I have tried this:
Flashed a stock rom, relocked bootloader, still had the same problem...
unlocked bootloader officially. Rooted and installed krexus rom, still have the same problem...
Found this thread: https://xiaomi.eu/community/threads/redmi-note-3g-not-charging-no-pc-connection.26290/
Does anyone know how to enter engineering mode on rn3sd?
Anyone know if I can short circuit the charging port like described in that thread?:
"After connecting a faulty USB cable my phone stopped connecting to PC and charging - It shows the symptoms of being in USB Host mode permanently.
I was able to charge the phone by entering engineering mode (Dial *#*#3646633#*#* ) and going to the Hardware Testing tab, scrolling up to UART/USB switch and selecting UART
The phone would then charge normally."
"I had that problem too. And I did what u did too.. the problem is that there is some sort of confusion between Otg and USB... so you will have to short circuit the charging port to revive it.
First open up your phone. To make the internal components visible.
Then connect ur charger to the phone.
While the charger is connected, use a flat metal or wire to short circuit the charging port. You should see a small spark and your phone would off.
Connect battery and Switch it back on. If it doesn't work try again for three -four times. If it doesn't still work then send your phone for repairs.
Don't be afraid, it's only 5volts your phone won't blow up. Short circuiting the charging port would revive it..
I did that to mine and it has been working well till now. "
Holy crap my usb has been busted for a while now (charges only and no usb to pc connection) and I might just try this
asusm930 said:
Holy crap my usb has been busted for a while now (charges only and no usb to pc connection) and I might just try this
Click to expand...
Click to collapse
Let me know how, i dont know what to do
FIXED! Suddenly it works.. I have used a couple of different roms. slim 7, miui, slim 6 etc.
Flashed the new zephyr 7 rom, and suddenly my phone can charge without rebooting!
Just wanted to update the thread if someone gets the same error!