Related
Hey all, I've got my springboard running JB and using TWRP for recovery. Anyone available to tell me how to put it back to completely stock if I wanted to sell it? that would be really cool. I'd even be happy with keeping TWRP and putting a stock rom (t-mobile) back on it too. Thanks! any help is appreciated.
Flash this http://forum.xda-developers.com/showpost.php?p=30905023&postcount=15
Corn Flake said:
Flash this http://forum.xda-developers.com/showpost.php?p=30905023&postcount=15
Click to expand...
Click to collapse
Those aren't flashable zips, as best I could tell, are they? flashable through TWRP i mean. do you have any further instruction? thanks for your help so far
fimanmd said:
Those aren't flashable zips, as best I could tell, are they? flashable through TWRP i mean. do you have any further instruction? thanks for your help so far
Click to expand...
Click to collapse
So, if anyone cares, I did figure out how to get it back to stock from TWRP and CM10. I had reflash stock recovery and then used the usual dload folder update process with the stock tmobile update the can be found in the dev section. Let me know if anyone has questions. Mine is now fully 100% stock.
@fimanmd: How did you reflash the stock Bootloader?
u need unzip stock rom zip first, because stock recovery in it.flash stock recovery and recovery2 in fastboot.then copy stock rom to sdcard2's root folder. now u can flash it use stock recovery.
Sent from my HUAWEI MediaPad using xda premium
extract out file recovery.img from stock's update.zip. put it on your PC. put the update.zip on your root microSD. then connect your tab to PC and restart it to fastboot mode (bootloader mode). then run command prompt and type this:
fastboot flash recovery recovery.img
fastboot flash reciovery2 recovery.img
fastboot reboot
after reboot your device must begin flashing stock's ROM
My Indian version Honor 7 with Android 6, PLKUL00 C675 B341, Bootloader unlocked, Rooted and Xposed installed.
today I received an update for B351, How should I proceed with the update.
Please someone help.
So if you reseaved the update then you should Just go to settings go down and update then click check for update
Timanttikuutio said:
So if you reseaved the update then you should Just go to settings go down and update then click check for update
Click to expand...
Click to collapse
Thats quite right, But my phone is rooted with xposed installed. So can I go and just click update?
Sent from my PLK-UL00 using XDA-Developers mobile app
no you cant
you need to remove root
first you should backup your and all important using hisuite then flash twrp and flash original honor 7 paggage from huawei website but you need to extract that huawei update file then flash system, boot, recovery and reboot
also you phone needs to be unlocked bootloader
ganeshindeed said:
My Indian version Honor 7 with Android 6, PLKUL00 C675 B341, Bootloader unlocked, Rooted and Xposed installed.
today I received an update for B351, How should I proceed with the update.
Please someone help.
Click to expand...
Click to collapse
First Unroot your device by flashing this UnSu script using TWRP recovery, then go to updater, update your device, if its still doesn't work then lock your bootloader and try again.
ganeshindeed said:
My Indian version Honor 7 with Android 6, PLKUL00 C675 B341, Bootloader unlocked, Rooted and Xposed installed.
today I received an update for B351, How should I proceed with the update.
Please someone help.
Click to expand...
Click to collapse
Remove root, it will not let the phone to be updated
If iam right...
1. Unroot from su
2. Flash FULL original B341 ROM by extracting the update file
3. Then update by Extracting the B351 update file.
4. ROOT again.
by the way before updating someone was saying i have to flash stock recovery.
How do i do that...
I extracted the B341 rom and found two recovery 1&2..how do i flash it.
Sent from my SM-T715 using XDA-Developers mobile app
PalakMi said:
Remove root, it will not let the phone to be updated
Click to expand...
Click to collapse
If iam right...
1. Unroot from su
2. Flash FULL original B341 ROM by extracting the update file
3. Then update by Extracting the B351 update file.
4. ROOT again.
by the way before updating someone was saying i have to flash stock recovery.
How do i do that...
I extracted the B341 rom and found two recovery 1&2..how do i flash it.
Sent from my SM-T715 using XDA-Developers mobile app
Ask @DigiGoon
@ganeshindeed
Follow these steps:
Unroot from UnSu script.
Flash system.img, cust.img, boot.img, recovery.img from B341 ROM by extracting the UPDATE.APP(B341) file.
Then put UPDATE.APP(B341) file in dload folder of your External SDCARD, and do the three button update.
Once the system successfully boots up.
Then put UPDATE.APP(B351) file in dload folder of your External SDCARD, and do the three button update again.
Thanks for the detailed help...appreciate it.
The problem is
1. Iam having two recovery after extracting B341. Which to use?
2. Also flash means how to do it...these are .img
Thanks
Sent from my SM-T715 using XDA-Developers mobile app
DigiGoon said:
@ganeshindeed
Follow these steps:
Unroot from UnSu script.
Flash system.img, cust.img, boot.img, recovery.img from B341 ROM by extracting the UPDATE.APP(B341) file.
Then put UPDATE.APP(B341) file in dload folder of your External SDCARD, and do the three button update.
Once the system successfully boots up.
Then put UPDATE.APP(B351) file in dload folder of your External SDCARD, and do the three button update again.
Click to expand...
Click to collapse
Thanks for the detailed help...appreciate it.
The problem is
1. Iam having two recovery after extracting B341. Which to use?
2. Also flash means how to do it...these are .img
Thanks
Sent from my SM-T715 using XDA-Developers mobile app
@ganeshindeed
I said recovery.img there is second one named as recovery2.img but you just have to extract recovery.img.
And by flash I meant to flash via fastboot commands, like these:
Code:
fastboot flash system system.img
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash cust cust.img
and to boot into fastboot/bootloader mode switch off your device and press and hold Vol DOWN + Power Button.
DigiGoon said:
@ganeshindeed
I said recovery.img there is second one named as recovery2.img but you just have to extract recovery.img.
And by flash I meant to flash via fastboot commands, like these:
Code:
fastboot flash system system.img
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash cust cust.img
and to boot into fastboot/bootloader mode switch off your device and press and hold Vol DOWN + Power Button.
Click to expand...
Click to collapse
Thanks man..
Sent from my SM-T715 using XDA-Developers mobile app
Always here to help.
DigiGoon said:
@ganeshindeed
Follow these steps:
Unroot from UnSu script.
Flash system.img, cust.img, boot.img, recovery.img from B341 ROM by extracting the UPDATE.APP(B341) file.
Then put UPDATE.APP(B341) file in dload folder of your External SDCARD, and do the three button update.
Once the system successfully boots up.
Then put UPDATE.APP(B351) file in dload folder of your External SDCARD, and do the three button update again.
Click to expand...
Click to collapse
Am always getting struck at 3rd step, three button update at 5%.
What shall i do
Sent from my SM-T715 using XDA-Developers mobile app
ganeshindeed said:
Am always getting struck at 3rd step, three button update at 5%.
What shall i do
Click to expand...
Click to collapse
If you are using the three button method then don't.
Just flash the four images and let Android boot normally.
Use your dialer to dial *#*#2846579#*#*
And choose software upgrade and then SD card upgrade and now it should run till 100%
Tried it friend but install failed at 30%
Sent from my SM-T715 using XDA-Developers mobile app
ganeshindeed said:
Tried it friend but install failed at 30%
Click to expand...
Click to collapse
ganeshindeed said:
Tried it friend but install failed at 30%
Click to expand...
Click to collapse
How long did you let it run when it got stuck at 30%.
When I got stuck at 5%, I used the method I mentioned and it worked for me.
Give it another try or two. Sorry, I don't know of any other way.
Maybe 5 to 10minutes...
Sent from my SM-T715 using XDA-Developers mobile app
Hi guys,
I am using the link below to perform the restore to stock from CM13 but I think I am not interpreting the questions in this post correctly.
http://forum.xda-developers.com/honor-5x/how-to/guide-kiw-l24-to-stock-t3318268
I tried to follow them to get my Honor 5x back to stock rom (while still keeping TWRP) and it was a no go. I kept getting stuck in a boot loop. I was able to immediately reflash CM13 though and get it functionaly. Would someone be kind enough to verify for me as to what steps exactly I need to follow (including ROM names, etc.)? I would greatly appreciate it.
Thanks.
@DigiGoon here's a person needing your help
I have a couple questions for you:
1) Before flashing CM13, what stock firmware version were you on? (e.g. b130, b140, b151, b331)
2) Before flashing CM13, did you take a NANDROID backup of your stock setup? Most guides have this step.
Follow these steps, and you'll get your stock ROM back.
Download your phone's latest firmware and extract system.img, boot.img, recovery.img, cust.img from UPDATE.APP using Huawei Update Extractor tool.
Boot into bootloader mode by switching off the phone then pressing only the Vol DOWN button, and connecting it to PC simultaneously.
Flash recovery first, using this command.
Code:
fastboot flash recovery recovery.img
Flash all other extracted files similarly firing these commands.
Code:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
After doing this put that very UPDATE.APP from which you extracted the files in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
Your device will now get to the full stock firmware.
Hope this helps you.
@DigiGoon
You are a lifesaver. That seems to have done the trick. Thanks a lot man!
fistfullofbeer said:
Hi guys,
I am using the link below to perform the restore to stock from CM13 but I think I am not interpreting the questions in this post correctly.
http://forum.xda-developers.com/honor-5x/how-to/guide-kiw-l24-to-stock-t3318268
I tried to follow them to get my Honor 5x back to stock rom (while still keeping TWRP) and it was a no go. I kept getting stuck in a boot loop. I was able to immediately reflash CM13 though and get it functionaly. Would someone be kind enough to verify for me as to what steps exactly I need to follow (including ROM names, etc.)? I would greatly appreciate it.
Thanks.
Click to expand...
Click to collapse
There is also a full, latest twrp, recovery backup o.o for b331
You restore everything except data, erecovery, and recovery... 1.6 gig download o.o does the job in one fell swoop as long as you have latest twrp.
Just did this the other day...
fistfullofbeer said:
@DigiGoon
You are a lifesaver. That seems to have done the trick. Thanks a lot man!
Click to expand...
Click to collapse
Happy to help buddy.
DigiGoon said:
Follow these steps, and you'll get your stock ROM back.
Download your phone's latest firmware and extract system.img, boot.img, recovery.img, cust.img from UPDATE.APP using Huawei Update Extractor tool.
Boot into bootloader mode by switching off the phone then pressing only the Vol DOWN button, and connecting it to PC simultaneously.
Flash recovery first, using this command.
Flash all other extracted files similarly firing these commands.
After doing this put that very UPDATE.APP from which you extracted the files in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
Your device will now get to the full stock firmware.
Hope this helps you.
Click to expand...
Click to collapse
Just wondering, does this replace the TWRP recovery with stock? And is there a way to keep TWRP if so?
gabepaul said:
Just wondering, does this replace the TWRP recovery with stock? And is there a way to keep TWRP if so?
Click to expand...
Click to collapse
Yes it does replace, and you simply need to reflash TWRP again
gabepaul said:
Just wondering, does this replace the TWRP recovery with stock? And is there a way to keep TWRP if so?
Click to expand...
Click to collapse
It replaces the TWRP, and if you are flashing stock via 3 button method, then there is no way you can keep it, but if you are getting on stock by flashing individual files then just dont flash the recovery file and you will just have the TWRP alone.
gabepaul said:
Just wondering, does this replace the TWRP recovery with stock? And is there a way to keep TWRP if so?
Click to expand...
Click to collapse
Instead of flashing full update.app , i can help u just to stop doing a lot of work after flash
DigiGoon said:
It replaces the TWRP, and if you are flashing stock via 3 button method, then there is no way you can keep it, but if you are getting on stock by flashing individual files then just dont flash the recovery file and you will just have the TWRP alone.
Click to expand...
Click to collapse
So which is the three button method and which is the other?
gabepaul said:
So which is the three button method and which is the other?
Click to expand...
Click to collapse
Three button method is nothing but by placing update.app in /sdcard/dload/
And then put off the phone followed by pressing vol down+vol up+ power button . This will let it install full stock rom and phone looks brand new in terms of software
gabepaul said:
So which is the three button method and which is the other?
Click to expand...
Click to collapse
As @gopinaidu77 said about three button method, its just that. And about the other one, in that you have to extract all the important img files from UPDATE.APP and flash it via fastboot commands.
DigiGoon said:
As @gopinaidu77 said about three button method, its just that. And about the other one, in that you have to extract all the important img files from UPDATE.APP and flash it via fastboot commands.
Click to expand...
Click to collapse
so I've tried both, and I'm getting stuck on the "Honor for the brave, powered by Android" screen.
I should probably also add that im trying to downgrade from lineage 14.0 Nougat to the android 6.1 emui 3.1
gabepaul said:
so I've tried both, and I'm getting stuck on the "Honor for the brave, powered by Android" screen.
I should probably also add that im trying to downgrade from lineage 14.0 Nougat to the android 6.1 emui 3.1
Click to expand...
Click to collapse
Sorry. 6.0.1 is emui 4.0.1 . Well bro , u can still unbrick ur device . Can i know which build number u are on before u flashed lineageos ?
gopinaidu77 said:
Sorry. 6.0.1 is emui 4.0.1 . Well bro , u can still unbrick ur device . Can i know which build number u are on before u flashed lineageos ?
Click to expand...
Click to collapse
Oh yeah, I have restored it already. I made a nandroid backup, and so when it happened, I just rebooted into fastboot and reflashed TWRP, then restored my phone from the backup. Not sure which build. Wondering what went wrong? And how I can successfully convert to stock
gabepaul said:
Oh yeah, I have restored it already. I made a nandroid backup, and so when it happened, I just rebooted into fastboot and reflashed TWRP, then restored my phone from the backup. Not sure which build. Wondering what went wrong? And how I can successfully convert to stock
Click to expand...
Click to collapse
Extract UPDATE.APP via Huawei Update Extractor tool, pull out relevant img files (system.img, boot.img, recovery.img, recovery2.img(if not in your device), cust.img) flash this one by one via fastboot by booting your device in fastboot mode, fire the given below commands.
Code:
fastboot flash <img name w/o extension> <full path to the relevant img file>
After this try the three button method, if it doesn't work then boot into eRecovery then tap "Download Latest Firmware". It will connect to Wi-Fi and will start downloading the latest firmware of your device. After the process gets completed you'll be on stock ROM with your bootloader in "Locked" state.
You are guiding wrong bro . There is a need of extension too. Else it will give error saying file not found
CUST issue
Hi,
I tried to do the same, Boot.img, system.img and recovery.img are flashed successfully but I cannot flash CUST.img, following error occurs, please help.
it says: while writing 'cust'...,
error: FAILED (remote: command not allowed)
Please help, thanks in advance.
I recently changed my stock recovery to twrp recovery because I want to flash a custom rom for my scc u21 when i flashed the custom rom I forgot to make a back up for my stock rom. So now I want to go back from my stock rom. Can someone upload the stock rom for huawei y6 scc u21 please.
aihte05 said:
I recently changed my stock recovery to twrp recovery because I want to flash a custom rom for my scc u21 when i flashed the custom rom I forgot to make a back up for my stock rom. So now I want to go back from my stock rom. Can someone upload the stock rom for huawei y6 scc u21 please.
Click to expand...
Click to collapse
download-c1.huawei.com/download/downloadCenter?downloadId=83446&version=327553&sit
da.fallen said:
download-c1.huawei.com/download/downloadCenter?downloadId=83446&version=327553&sit
Click to expand...
Click to collapse
Thanks
If you have stock recovery, use this method:
1. Download the .zip file. http://download-c1.huawei.com/download/downloadCenter?downloadId=83446&version=327553&sit
2. Unzip/extract it. Copy the dload folder to your SD card’s root directory.
3. Turn off your Huawei. (Make sure your battery has enough power. Charge it if necessary.) Insert the memory card.
4. Press both Volume keys (VOL UP and DOWN) and then the power key until the software upgrade progress bar displays. Then you can release all keys.
5. Wait until the progress bar finishes and the phone restart.
-------------------------------------------
If you have twrp recovery, use this method:
This is stock rom that i backup but rooted with kingroot (can unrooted). Flash Using twrp recovery 2.8
1. Download this : https://drive.google.com/open?id=0B8O0sP_rAVusMHpjVTVwYjZIamc
2. Extact and copy TWRP folder to sd card or internal storage.
3. Turn off your Huawei.
4. Press both Volume keys (VOL UP and DOWN) and then the power key to enter recovery
5. Press wipe button and wipe data.
6. Press Restore button.
7. Select which storage that u put TWRP file
8. It will show the files. Press that
9. Tick all or which u want to restore
10. Swipe to restore and wait. reboot
hope its help u.
Doesn't work. stays the same.
any other ways how to reprogram this phone. always in fastboot mode
How should I install an original Huawei rom , no brand, downloaded from their cloud?
The name file is: ATU-L11C55CUSTC55D1B150 (8.0.0.150).zip
the ROM is a .zip with the files in the photo inside:
I tried the procedure to extract the update.app file and put it in the dlod folder of the SD card, but it does not install.
I have the privileges of ROOT and I have unlocked the bootloader, I can not install the
* TWRP Recovery.
Help!
since it is not possible to install the ROM version "update.APP", unzipping this with "HuaweiUpdateExtractor", which files should I flash with fastboot in bootloader mode?
Is this possible?
Yes, use the HuaweiUpdateExtractor and flash the system.img with fastboot.
Best regards
Yes, use the HuaweiUpdateExtractor and flash the system.img with fastboot.
Best regards
which files should I flash?
you need to download the full rom, go here: https://www.mobileheadlines.net/download-huawei-y6-2018-firmware-files-all-versions/
download the FullOTA-MF for your model and extract the zip, after that use huaweiupdateextractor on the update.app and extract SYSTEM.img
reboot into bootloader and flash the extracted SYSTEM.img to your phone using fastboot flash system SYSTEM.img
please make a tutorial thread. i want to use the original rom too.
Fakkurai said:
you need to download the full rom, go here: https://www.mobileheadlines.net/download-huawei-y6-2018-firmware-files-all-versions/
download the FullOTA-MF for your model and extract the zip, after that use huaweiupdateextractor on the update.app and extract SYSTEM.img
reboot into bootloader and flash the extracted SYSTEM.img to your phone using fastboot flash system SYSTEM.img
Click to expand...
Click to collapse
I tried and despite the flash of fastboot is successful I always find myself with the original TIM branded ROM, I do not know what else to do!
henryxp said:
I tried and despite the flash of fastboot is successful I always find myself with the original TIM branded ROM, I do not know what else to do!
Click to expand...
Click to collapse
there are paid rebranding services, which can work for qualcomm based devices
mutahharbashir said:
there are paid rebranding services, which can work for qualcomm based devices
Click to expand...
Click to collapse
yes I know, there's a guy, the one who gave me the bootloader code, that wants $ 20 to debrandize it, too much for so little ..