Hi All. We have Stock ROM zips for TWRP as you know. But i have boot problem if I install them with instructions which on topics. I know i am not alone who facing with this problem. This Guide is competible with all models.
Here are the steps to install Stock ROM from TWRP.
1. Check first;
Once you booted to TWRP , Tap Mount and Check "Mount, System as Read-only", this is very important
2. Install bootstack and system files.
3. Wipe Art & Cache.
4. Reboot Recovery. (Not system, just recovery)
5. Install SuperSU now.
6. Reboot.
SuperSU will not be fully installed if you don't reboot recovery. So you can not boot.
Related
I'm using TWRP 2.7.8 and these are the steps I followed:
- Wipe system, cache, data and dalvik
- Flash repartition script
- Flash LineageOS zip
- Reboot
After rebooting, it goes to MultiROM selection, and says it is booting Internal(I have removed all other roms) but then it reboots into TWRP again.
I'm unable to install it as an alternate rom in Multirom as well. It throws the error: 'E:Error executing updater binary in zip '/tmp/mr_update.zip'
Yes please someone ! This system partition thing isn't properly working. Stuck at mi logo.
Prequsites:
Download following files:
Repartition Script zip: https://mega.nz/#!645wGZIC!maidxLV7kRMcQTaUM-V6QvOJplL3nfrDWWXiZYhLyJ0
TWRP Multirom 2.8.4: https://mega.nz/#!644RyARI!6pXZVk16xS3vxFL52UxKwEEmcX_iQ8YEaAd37JHm5w4
TWRP 3.0.2.0: https://dl.twrp.me/mocha/
Place all the files on the device.
Step 1: In your current TWRP: Wipe -> Advanced Wipe: Tick Dalvik/art, System, Cache and Data -> Swipe to wipe
Step 2: Reboot into Recovery
Step 3: Install TWRP Multirom 2.8.4 and reboot to Recovery
Step 4: Once rebooted go to Install and select the Repartition Script zip the device will reboot into Recovery
Step 5: Back in Recovery go to Wipe -> Advanced Wipe Tick System an click Repair or Change File System. The size is now 0MB -> press "Resize File System" and it should be Size: 1235MB
Step 6: Go to Install and select the "Image" Button in the lower right corner and select TWRP 3.0.2.0 mocha, select Recovery and Swipe to flash. Reboot Device into Recovery. It asks you there is no OS installed confirm that with Swipe after that it asks if you want to install SuperSU.... click on DONT INSTALL
Step 7: You should be now in TWRP 3.0.2.0 now go to install flash Lineage OS, Gapps and SuperSU it should work.
Multirom
Does anyone succeed on dual boot with Miui Smoke, i wanna make Lineage OS as secondary ROM since camera not working yet..
Legacyleader said:
Step 1: In your current TWRP: Wipe -> Advanced Wipe: Tick Dalvik/art, System, Cache and Data -> Swipe to wipe
Step 2: Reboot into Recovery
Step 3: Install TWRP Multirom 2.8.4 and reboot to Recovery
Step 4: Once rebooted go to Install and select the Repartition Script zip the device will reboot into Recovery
Step 5: Back in Recovery go to Wipe -> Advanced Wipe Tick System an click Repair or Change File System. The size is now 0MB -> press "Resize File System" and it should be Size: 1235MB
Step 6: Go to Install and select the "Image" Button in the lower right corner and select TWRP 3.0.2.0 mocha, select Recovery and Swipe to flash. Reboot Device into Recovery. It asks you there is no OS installed confirm that with Swipe after that it asks if you want to install SuperSU.... click on DONT INSTALL
Step 7: You should be now in TWRP 3.0.2.0 now go to install flash Lineage OS, Gapps and SuperSU it should work.
Click to expand...
Click to collapse
Thank you so much! This worked like a charm. Now I've got it up and running, but I've got a problem. Google Play Books doesn't display any text in any book I open. It just shows blank pages. I've vaguely understood that this is some problem with the webview, but how do I fix it?
Encountered very weird issue when trying to install roms
Hi guys, I'm currently on 'Resurrection Remix M - v5.7.4' after trying to install 'LineageOS 13' which hung during installation on "Patching system image unconditionally" . I've also manged to install 'AOSiP KANG 5.5 - 7.1.1'; once. After managing to install it, I tried to install 'Lineage OS 13' again, but it still fails at the same spot. Now every time I try to install 'AOSiP KANG 5.5 - 7.1.1' in hangs on "flashing AOSiP" . So, I then tried 'Resurrection Remix M - v5.7.4', it worked and now I think I'm stuck on Remix. I'd like to install "LineageOS 13" as the new FoxyKernel only works on 'Lineage OS 13'. I've already merged the partitions and have been able to return to stock rom through the use of the miflash tool and fastboot. I've already tried flashing 'LineageOS 13 and 14' using 'twrp2.8.4 and 3.0.2' but both have failed I've also tried using 'CWM 6.0.5' but that failed as well. I've always wiped everything except the sdcard and usb when trying to install a new rom. Can someone please help me install 'Lineage OS 13' ?
#Note, after I failed each install I always returned back to stock and redid everything again.
~Update 6/3/17
I've just tried to install 'lineage OS 13.0 ' again and it failed yet again, now it seems that I can't reinstall 'Resurrection Remix M - v5.7.4' it hangs yet again on patching system unconditionally, which it did not the first time round. Furthermore, the back up I made previously of Resurrection Remix M - v5.7.4, fails to install and fails on "extractTarFork() process ended with ERROR: 255". Can some one please me.
~Update 7/3/17
Managed to install the new 'lineage OS 14.0'; screwed up the install, by installing 'foxykernel' before booting. Caused system to be stuck on lineage boot animation.... should have read the thread before attempting to install and as usual rom refuses to install again. Stuck at "Patching system image unconditionally". Managed to install 'AospExtended ROM V3.1' but system hung on 'verifying network configuration' and "Just a Sec..." screen; WiFi for other devices were ok no issues. Left it on for over 10 hours no change. Wiped dalvik/art cache and cache tried again but no such luck. Wiped data, but also no luck.
#Note, by this time I've given up on returning to stock, as it did absolutely nothing .
~Update 8/3/17
Managed to flash the new 'lineageOS13.0', wiped dalvik and cache, installed Gapps but system stuck on Mi logo on boot. Managed to install 'RR-N-v5.8.2-20170306' boots up fine... tried to install 'Foxy kernel 1.5.rc2'... wiped cache. Now stuck in boot loop... :Facepalm: should have read the instructions first... forgot to back up boot. :Facepalm:. Will have to wait for MM version of the rom or newer version. Tried 'AOSiP-5.5-KANG-mocha-20170306' for some reason it got stuck on boot loop, only shows mi logo.
~Update 19/3/17
Managed to flash the new 'lineageOS14.0[2017-03-12]' , installed 'Opengapps pico 20170314' found out that in order to be stable need to factory reset, then install Gapps, so that when first boot, account set up shows. Installed 'Foxy kernel 2.0.8', now antutu score "80000" ... found out that the backup for boot works. Installed TWRP 3.1.0 , but still cannot install a ROM more than once. All in all 'lineageOS14.0[2017-03-12]' very smooth now that Gapps stopped crashing.
Hey there I cannot install any Custom ROM on my honor 5x(kiwi)Everytime I install any custom ROM, be it cyanogenmod, xenonHD or resurrection remix. I follow the exact same steps posted everywhere.
Here are the steps I followed(using TWRP):
put both gApps and ROM file on Sd card
boot into recovery mode
select wipe>advanced wipe> selected(Dalvik/Art Cache+cache+data+system+(tried wiping internal storage once too)
swipe to wipe
go on home
select install select Custom ROM +(selected gApps once with ROM zip and once separately)
swipe to confirm flash> clear dalvik/cache
reboot system
Phone goes into bootloop everytime
tries going into recovery again>wipe>advanced wipe>select dalvik/ART cache+cache
swipe to wipe
reboot
phone is still in bootloop no matter how much time I leave it.
PLease help I'm stuck
I'm getting the same problem as well. My device is a Honor 5X KIW-CL00
I've installed TWRP & lineage-14.1-20170415-Strick-kiwi.zip, wiped Dalvik/Cache/Data, but still stuck in bootloop. It's the same situation if I try and flash CM13 or any other custom rom. Please help.
Sorry guys, help need here... installed RR 7.1.2 on GT-I9100 but failed to install Gapps... here are my steps...
1. Repartition via Odin - pit file - I9100_1.5GB-System_6GB-Data_32MB-Preload_by-the.gangster.pit - successful;
2. Flash CWM -Kitkat Compatible i9100 via Odin - successful;
3. Copy (a) RR-N-v5.8.4-20170813-i9100-Official and (b) gapps - open_gapps-arm-7.1-mini-20170910 to SD card;
4. Reboot to CWM, wipe partition, cache, dalvick cache, format system partion, flash (a) - successful;
here is the uncertain ways to flash gapps, but i try both ways, all failed.
5a. Right after flashing (a), straight away flash (b), successful, reboot but stuck at boot animation,
5b. After flashing (a), reboot and set up - successful, set Developer option, reboot to CWM to flash (b), error message e:\failed to find / misc partition.
The rom successfully installed and running, but unable to flash gapps.
Any comment? Thanks in advance!
I would suggest starting again this time install TWRP v3.1.0.0 recovery instead of CWM. You will need a compatible kernel. See djibe's guide in help section.
https://forum.xda-developers.com/galaxy-s2/help/guide-tutorial-samsung-galaxy-s2-i9100-t3538601
Currently: I currently have a custom-recovery (OrangeFox) and Magisk successfully installed on stock ROM.
I am now ready to flash a custom-ROM (LineageOS for now) and am unsure whether or not I need to re-flash Magisk before rebooting to system... SO in general is the process:
1) Flash custom-ROM
2) Reboot to recovery and flash Gapps
3) ???? Should I reboot to recovery and flash Magisk then reboot to system OR just reboot to system and Magisk is retained... also, since root was accomplished via Magisk, will flashing a custom-ROM unroot the phone?
Any guidance is appreciated.
Yes, Flashing any custom rom will unroot your phone. You've to reflash magisk after flashing the rom.And make sure you backup everything.
1) Download the ROM and GApps of your choice
2) Make a full wipe (system, data, cache, dalvik, vendor)
3) Flash Rom Zip
4) Flash GAPPS package
5) Flash Magisk zip
6) Wipe cache!
7) And at last Reboot!
steps i need to follow for flashing rom
1. wipe (delvik, cache, system, data)
2. install rom (after flashing a message appears 'No OS installed)
3. then i press home button, and reboot to recovery.
4. Again install rom (this time without wiping any thing)
5. finally gets new rom.
why m not able to flash rom directly after wiping cache etc.
i have to always flash the rom two times (step 4) to install.
where i am getting it wrong?? help please
previously I was using Pixel experience Rom (decrypted)
edit solution: the issue was because of using older version of TWRP. hence solved.
your issue might be because of system partition not getting mounted properly after the wipe. Hence After wiping, reboot to recovery then flash rom.