What we need:
1. J5 Prime with Android 6.0.1
2. Heimdall
3. CWM Recovery
4. Firmware
What to do:
1. If you have Android 7 firmware and you are Windows user just download Android 6 firmware and flash it using Odin.
2a. If you are Linux user, it is hard to find firmware for Heimdall, so download firmware. Most of time files are compressed into one file, for example g570fxxsomething.zip. Extract it, you should have 4 or 5 files with extensions .tar.md5. Rename them from something.tar.md5 to something.tar.
Extract each of them into one folder, lets name it IMG.
2b. Switch of phone. Go to download mode by pressing Vol.down+Home+Power. Open Heimdall and connect phone to PC.
Go to Utilities and click Detect. You should see Device detected under output, if not plug out and plug in usb.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Under Download Pit click Save As button choose folder and type sm-g570.pit and click OK. Then click Download.
3. Goto Flash and under Options click Browse and select newly created pit file.
Click Add and add partition bootloader then click browse and choose sboot.bin from IMG folder. Repeat action for other partitions.
BOOTLOADER - sboot.bin
CM - cm.bin
PARAM - param.bin
BOOT - boot.img
USERDATA - userdata.img
RECOVERY - recovery.img
RADIO - modem.bin
SYSTEM - system.img
CACHE - cache.img
HIDDEN - hidden.img
Then Click Start. Wait till it completes. Phone will restart.
4. Turn of your phone and goto Download Mode and reconnect it to PC. Download SM-G570-CWM-RECOVERY.tar (Link is below). Extract it. Goto Heimdall under utilities click on Detect. Then go to Flash and remove all partitions. Add only RECOVERY and browse and select extracted CWM recovery.img and flash it. Your phonew will restart.
5. Download su.zip (link is below). Copy it to sd-card. Goto recovery by switching off phone then by holding Vol.up+Home+Power. And install su.zip from recovery menu. If you don't have sd-card install it using adb sideload. The goto reboot and choose yes if it asks for root.
-------------------
Links:
Recovery-https://drive.google.com/file/d/0B_IBa7jJmqHoSUl5cnVJYmg3VVU/view?usp=sharing
Supersu-https://drive.google.com/open?id=0B_IBa7jJmqHoWXgzV3BwUlpqR3c
Wifi password
Thank
Resurrection Remix Oreo
Related
I'm not responsible for any damage what-so-ever done to your phone, you accept this risk.
Hi all,
I'm proud to present guide how to fix force close when downgrade firmware without data on sdcard lost.
In case , I have flashed OptimusG3 V1.4 that is a higher firmware than LG G2 D80220c then I want to return to stock with KDZ flashing method (Use D80220c firmware).
While G2 boot normally and prepare enter to system I got many error.In this case the one way you have to use TOT flashing method.Your data in SDCARD will be lost.
Testing on D802 Work.... All files in Zip for D802 Only ..
You can apply with other variant. Changing recovery.img and laf.bin
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have a little guide to help you return back to stock without data on SDCARD lost.
1. Download LG_Root_LP_20150313.zip
This is a new ROOT method from
http://forum.xda-developers.com/android/development/guide-root-method-lg-devices-t3049772
I got it from that link.I'm adding recovery.img that is a TWRP Recovery in to zip file and laf.bin Partition.
2. Unzip LG_Root_LP_20150313.zip
3. Put G2 in Download Mode
4. Open command DOS in LG_Root_LP_20150313 (Click Command Prompt.bat )
5. Checking what is port that connect between G2 and Computer (Run ports.bat)
6. Use command > Send_Command.exe \\.\COM41
COM41 is a port that connecting between G2 and Computer which find from 5.
This Method is RISK!!.It will be destroy your DOWNLOAD MODE. Please consider before use the next command...
7. Use command
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/laf
FOR destroy DOWNLOAD MODE
8. Use command
LEAVE
For exit. then G2 will be reboot
9. Trying Enter DOWNLOAD MODE again .The Phone will be enter fastboot mode instead.
10. Don't worry. In command prompt.Use Command
fastboot.exe boot recovery.img
For Reboot to TWRP Recovery
11. In TWRP .Choose Wipe > Advanced Wipe > Check
- Dalvik Cache
- System
- Data
- Cache
Then Swipe to Wipe
12. In TWRP Choose Home Button then Choose Reboot > Power Off
13. Tring Enter DOWNLOAD MODE again .The Phone will be enter fastboot mode instead.
Use Command
fastboot.exe flash laf laf.bin
For fix DOWNLOAD MODE
14. Use Command
fastboot.exe reboot
For exit fastboot mode
15. After that Trying Enter to DOWNLOAD MODE .You can Flash KDZ firmware normally.
ENJOY......
This phone is my brother's. He said he just downloaded a system update, I think it is OTA. And when update starts (from the stock recovery? not sure) It stucks at 50% progress bar, and it reboots. And update starts again, and reboots again. It won't boot even after removing battery, putting battery back on and turning the phone on, it persistently go back to loop update system. Should I flash it with a stock ROM? which one? The build no. I think is 1.0020? Can I flash the 1.050 one? Here is a pic of what's happening in a loop.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Follow this guide to reboot into recovery
http://www.hardreset.info/devices/acer/acer-liquid-z630/recovery-mode/
After entering recovery , try factory resetting your device.
This will reset all data.
If the above method didnt work , only option is to flash a Rom manually using SP Flash Tool
Stock Rom
http://vache-android.com/hubicAcer/Z630/OS Images/Acer_AV0L0_T03_1.020.00_EMEA_GEN1.zip
Hello there. Please take a look at this guide by Shreps.
Download a compatible custom recovery (CWM or TWRP) for your device. Also download the firmware (ROM) for your device (list by Shreps). Please refer to the guide (there should be one). You would need to (a) Install necessary drivers, and (b) ADB and Fastboot interface (try this)
Copy the custom recovery image into the root folder of your ADB and Fastboot program. Copy the firmware to your device (via external sdcard since you cant copy directly into the internal sdcard).
Go to recovery via (a) volume up + power buttons, or if device accessible via ADB, (b) adb reboot recovery
In the recovery options, choose 'fastboot' (or simply, via adb: adb reboot bootloader)
Go to your terminal/cmd: fastboot devices - and see if your device is recognized
Then: fastboot boot "recovery.img" (replace "recovery" with the name of the recovery image)
In the recovery, navigate and select "Install" and select the firmware on the external sdcard. (wiki)
If you cant install via fastboot (bootloader must be unlocked first before using fastboot), then flash the rom via SP Flash tool (refer to the guide)
Hello Guys,
For flashing Stock ROM through fastboot, you need to follow this procedure:-
1. Unlock the bootloader of your MI device, Click Here [Official Link], to get unlocked.
2. Download MIUI V8.1.1.0 and extract on the PC, if you already have downloaded then skip downloading.
3. Download and extract the MIUI Flashing tool, then install on the PC by double click on it.
4. Then boot the MI device in Fastboot Mode, via Power off then Press and hold Volume Down + POWER keys both at once for a few seconds. Then connect it to PC.
5. Now Run MIUI flash tool by double click the MiFlash.exe file from the desktop shortcut or installed folder on C:\ drive.
6. Then copy the full path of downloaded and extracted MIUI ROM folder and paste onto the MIUI flash tool file locate bar.
7. Then click the Refresh button next to it, the MIUI Flash tool will automatically recognize your device.
8. Next, click the Flash button to start flashing.
9. Finally, the process gets completed and the process bar turns fully green.
10. Done!
See Image below:-
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
OTA flashing instructions via Stock Recovery
1. Download MIUI Global Stable 8.1.1.0 OTA and then rename the ROM file to “update.zip” on the PC.
2. Now connect the MI device to PC and copy the downloaded and renamed ROM file, to root directory of device’s internal storage. [don’t place on any sub-folder]
3. Now boot your MI device in recovery mode, to do so power off the device > then press and Volume-Up + Power buttons both at once for a few seconds.
4. In recovery mode first choose language and then navigate and select “Install update.zip to System” > then select “Yes” to confirm. [Navigate with Volume up/down and select with Power key at recovery mode].
5. Finally, navigate and select the “Reboot” to reboot system normally.
6. Done!
See Image below:-
Official OTA of Global Stable 8.1.6.0
Click here to download Global Stable V8.1.6.0 OTA. For installation use Recovery method.
I am not the author, the author is a Chinese user, just a simple translation, the original post will be placed in the back.
-----------------------------------------------------------------------------------------------------------------------------------------------------
Amazfit nexo (Magisk，root,wearable)
Why not use fastboot because the command is disabled.
You need: adb tool, QFIL (in QPST), MagiskManager.
1 .Install QPST on your computer
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2.Open QFIL and adb, enter adb reboot edl in the command window to enter 9008 mode
3.Extract boot
3.1)Download firehose and configure it according to the figure below
3.2)After entering Partition Manager, right-click the partition and click Manage Partition
3.3)Read partition: read as below
==============================================================================================
Note: Please backup each partition according to the above method, otherwise you will not be able to boot after failure. You can't use other people's recovery package to recover.
And at the same time rename to the partition name (without changing the suffix)
==============================================================================================
4.Convert boot.bin to boot.img (use IMg2simg)
5.Import to watch
Put boot.img into the watch, and cancel the hook of keeping avb2.0 in the installation option of MagiskManager.
6.Flash into boot
There is a magisk_patched.img file in the Download folder of your watch, put it on the computer, the watch restarts into 9008 mode, also use Partition Manger, right-click the boot partition (not aboot partition, don't
make a mistake), also click on the first One item, but to flash it in, we click Load Image and select this magisk_patched.img for flashing, twrp is the same.
7.Flash into wearable
Install ROOT Explorer，Unzip the wearable.zip and put it in the watch, copy it into the corresponding path one by one (for example, system/framework corresponds to /system/framework)
8.Then you can try to install some modules or wearos applications
File:
https://drive.google.com/drive/folders/1BHlxNqKZ3QoRv3PSULn1AwGadowSA_nQ?usp=sharing
Link：
https://www.coolapk.com/feed/176069...d=1096145&shareFrom=com.coolapk.market_10.2.1
https://www.coolapk.com/feed/175621...d=1096145&shareFrom=com.coolapk.market_10.2.1
https://www.coolapk.com/feed/173257...d=1096145&shareFrom=com.coolapk.market_10.2.1
https://www.lanzous.com/b015anw7e 密码:5ty2
can you point us to the direction of this chinese guy?
xicko said:
can you point us to the direction of this chinese guy?
Click to expand...
Click to collapse
This is the CoolMarket homepage of Chinese authors. Http://www.coolapk.com/u/1415080
The author also asked a programmer to compile it TWRP,https://wwu.lanzouv.com/i1L9Y0a61q3c
Password: 69zz
unlock bootloader, install twrp recovery and root rog3 ANDROID12 work on a11 too
tested on WW only
warning warranty will be void!!!!
to unlock boot download app below and install
unlockAPP
open app. scroll down and as follow
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
when you press to unlock device it will reboot your phone (NOTE: this will format
your phone, backup necessary files before you proceed)and when phone is booting you will
a warning. don't worry it just alarming you, that your phone is already unlock
next is to install twrp
files needed
adb&fastboot driver download here
google how to install it
adb&fastboot tool download
(extract in desktop. create your desired folder name EG: rog3project)
twrp android 12 download here
for a11 see download page https://dl.twrp.me/I003D/
(move or copy downloaded image in same folder as adb&fastboot tool EG: rog3project
extract first if you downloaded zip file)
todoso
first boot your phone to bootloader
1. power your device off
2. when device is off press and hold volume up and power button together till popup
will appear your now in bootloader mode
3.now connect your device to pc (NOTE: connect side port of device. very important use only the upper c port
before proceed)
4.check if device is connected and or the driver is installed correctly
go to extracted adb&fastboot tool folder EG: rog3project and open
cmd from that folder. in command prompt type the command
fastboot devices
this should show your fastboot device, if it return blank try to install driver again mentioned above
5.installing twrp based on your android version. on cmd type this command. for a12
fastboot flash recovery twrp-3.7.0_12-0-I003D.img
or
fastboot flash recovery (then grab the image file folder and drop to cmd)
then reboot to system
next is to root with magisk
on your phone
-first downlaod magisk apk here
(NOTE: put it on main device storage or just leave it in download folder)
-second boot to recovery. now power your device off
after switching off press and hold volume up and power key till your in bootloader mode
now use volume key and navigate to recovery and press power key to proceed.
-third on twrp recovery goto INSTALL and loacte the magisk apk file. select and install
wait till it end successfuly and reboot
-last after device is switch on goto file manager and install the magisk apk
DONE
next is how to enable volte on android 12 and custom rom android13 in any country
CREDITS:
@Captain_Throwback
@topjohnwu
@meisnerwest
I got an error. Failed to unlock your device[11003], please try again late. my software info : CN_18.0410.2203.201 . and my imei1 : 0 imei2 :0