[TWRP][montana] Squid TWRP for Moto G5S - Moto G5S ROMs, Kernels, Recoveries, & Other Devel

This is my version of TWRP built for the 2017 Moto G5S. It should work fine, but using it is a try at your own risk procedure. Your bootloader must be unlocked to use this recovery. Fastboot mode is used to flash or boot this recovery. To enter fastboot mode, turn off your device, hold PWR and VolDn for 3 seconds, then let go.
Differences between upstream TWRP and my fork:
My original green theme
No SuperSU
No TWRP app
No HTC Dumlock cruft
Updated pigz compressor (slightly faster and more tolerant of corruption)
To temporarily boot this recovery:
Code:
fastboot boot twrp.img
To permanently flash it:
Code:
fastboot flash recovery twrp.img
The download is available on the downloads tab.
XDA:DevDB Information
TWRP for Moto G5S, Tool/Utility for the Moto G5S
Contributors
squid2
Source Code: https://github.com/moto8937-twrp
Version Information
Status: Stable
Current Stable Version: 3.2.3-r1
Stable Release Date: 2018-08-17
Created 2017-11-05
Last Updated 2018-08-17

Squid TWRP 3.1.1-r3
Initial build for montana is up. I expect it to be fully functional, including encryption support. Special thanks to @lohanbarth for testing.

thank you for your work :good:

Hi,
i just flashed your TWRP. The flash was successful, after booting to recovery twrp came up just fine. I wiped /data to decrypt, then rebooted the phone... Now it seems either bootlooping or bricked.
(Of course i unlocked the bootloader before flashing)
The phone just shows the bootloader-screen (blue background, red M-Logo, white letters "powered by android") with a small text in the middle "bad key).
Nothing happens. I cant even shut it down. Holding the power button for 10 seconds seems to start a reboot (screen goes black) but the bootloader-screen immediately shows back up and stays. Theres nothing i can do, no adb/fastboot access either...
Any suggestions?
Edit1:
AH! Pressing VolDown + Power gets me to fastboot/recovery... Phew. Guess i flash the stock rom first before proceeding any further.
Edit2:
Succeeded, nice!

Hi,
I flashed this TWRP. After flashing I went to recovery mode. Format Data failed as /data unknown. Flashed stock ROM. Again flashed TWRP. This time it just bootloops into TWRP recovery. When I power off and ON again, it bootloops and goes into TWRP recovery again and again. Any idea what could be wrong? My guess is I screwed up partition table. But not sure.
Thanks
KS
I went through flashing stock ROM, TWRP once again. After flashing TWRP, I went to recovery repeatedly and did 'Format Data' every time. I flashed Magisk. System booted fine. I verified by power off/on several times. Seems to be working fine.
Thanks
KS

Thanks for your hard work at bringing TWRP to the MOTO G5s.
It took me a while to install it on my XT1797, as there was some strange message during boot which said
ID: Bad key
But after many many times bricking and unbricking, I am now finally rooted using Magisk.
Hope that we can see some custom Roms for this great device soon.

I tried it with XT1797, but I can not boot and flash twrp.
Is this twrp compatible with XT1797?

hello, your bootloader and unlock it?
did you enable USB debugging?
that you put the fastboot cmd?

Hi . Thx for You job . My phone stil a live But I have a question .
how about this one ? At first boot twrp will ask for "Swipe to allow modifications for /system" and if you choose to allow it system partition will get modified. So if you choose to reboot back to OS without performing anything in twrp, the OS won't boot (as verity check is enabled in stock OS/kernel) . To avoid this you have to flash either SuperSU or flash any of the verity disabler zips there in xda

FAFAƁ said:
Hi . Thx for You job . My phone stil a live But I have a question .
how about this one ? At first boot twrp will ask for "Swipe to allow modifications for /system" and if you choose to allow it system partition will get modified. So if you choose to reboot back to OS without performing anything in twrp, the OS won't boot (as verity check is enabled in stock OS/kernel) . To avoid this you have to flash either SuperSU or flash any of the verity disabler zips there in xda
Click to expand...
Click to collapse
What is the question? For me it worked without such vertiy disable stuff. Simply unlock the bootloader, boot and/or flash TWRP, root your phone or do anything else. When TWRP asks to change /system, answer yes.

Root and TWRP. And a great phone.
Just need some Roms, pray that they will come!
Thank you!

janhieber said:
What is the question? For me it worked without such vertiy disable stuff. Simply unlock the bootloader, boot and/or flash TWRP, root your phone or do anything else. When TWRP asks to change /system, answer yes.
Click to expand...
Click to collapse
Ok .that's all super go to recovery end fire .Thanks

Hello, I compiled the twrp3.2 with the sources of squid2.
thank @squid2 for sources
twrp-montana-3.2.0-r1 > http://www.mediafire.com/file/4443oy6kwiyvm5g/twrp-montana-3.2.0-r1.img

Squid TWRP 3.2.0-r1
I've posted a new build of my TWRP with the latest changes from upstream. It brings better support for Oreo zips while still supporting older ones. It also has improvements to the reliability of backups.

squid2 said:
I've posted a new build of my TWRP with the latest changes from upstream. It brings better support for Oreo zips while still supporting older ones. It also has improvements to the reliability of backups.
Click to expand...
Click to collapse
Dear @squid2 please give some ROMs also
... please i know you are busy with work but it is just a request

Unable to Flash twrp recovery
After flashing oficial firmware, i am no longer able to flash twrp recovery, after each system reboot, i am back on stock recovery.
Does anyone know how to fix?
Flashed using: fastboot flash recovery twrp.img
Get a notification: bootloader file not signed or corrupt

dau999 said:
After flashing oficial firmware, i am no longer able to flash twrp recovery, after each system reboot, i am back on stock recovery.
Does anyone know how to fix?
Flashed using: fastboot flash recovery twrp.img
Get a notification: bootloader file not signed or corrupt
Click to expand...
Click to collapse
after the flash of the twrp you select good recovery in the bootloader?

lohanbarth said:
after the flash of the twrp you select good recovery in the bootloader?
Click to expand...
Click to collapse
Select good recovery in the bootloader??!!
Bootloader gives me a notification that the img is not signed or corrupt (squids one)

you tried to download it again and then try again

lohanbarth said:
you tried to download it again and then try again
Click to expand...
Click to collapse
I did, same error.

Related

[CM13 post-MM] Flashing in TWRP auto-reboots phone into recovery - help!

I was running the 8/3 update of Cyanogenmod 13 just fine on my L24. I downloaded the 8/13 nightly from the CM website and tried to flash it, but for some reason it returned error 7, which shouldn't happen because I already updated to EMUI4/MM firmware two weeks ago (as evidenced by me running the 8/3 version with no problems). However, when I then tried to boot back into system, the phone instead booted back into TWRP. Trying to boot into system in any way (from TWRP menu, through bootloader --> fastboot reboot, et cetera) just reboots the phone right into TWRP again. -_-
Now, I can access only TWRP and bootloader, but whenever I try to flash a .zip in TWRP it immediately reboots back into TWRP. I've tried reflashing TWRP (newest version and older versions), flashing the Cyanogenmod recovery for kiwi, factory resetting, and even reflashing the stock recovery and trying to return to stock EMUI. None of these have worked. (And yes, of course I've tried clearing cache/dalvik.)
At this point I'm just looking to actually boot into system...If anyone has any idea how I might be able to fix this, it would be great.
EDIT: to clarify, when I try to flash the ROM in TWRP, I get the following:
updating partition details
full selinux support is present
MTP enabled
and then an immediate reboot. This is very fast - I had to take a video of it and then freeze the frame to see what the message was.
Boot in fastboot and install your crap? Turn phone off connect to your PC hold Power and volume down until it boots.
Thanks for responding!
Could you explain what you mean? I can easily get into fastboot, but I'm not sure what I should be installing. Trying to install the ROM gives me the android-info.txt/android-product.txt missing error, which makes sense because it's not a fastboot ROM. What file should I be installing through fastboot?
radiobacter said:
Thanks for responding!
Could you explain what you mean? I can easily get into fastboot, but I'm not sure what I should be installing. Trying to install the ROM gives me the android-info.txt/android-product.txt missing error, which makes sense because it's not a fastboot ROM. What file should I be installing through fastboot?
Click to expand...
Click to collapse
fastboot flash recovery twrp.img
reboot with power + volume up and down
from TWRP
Install / yourRom.zip
Install / gapps.zip (if needed for cm13 based roms)
reboot / system
enjoy
clsA said:
fastboot flash recovery twrp.img
reboot with power + volume up and down
from TWRP
Install / yourRom.zip
Install / gapps.zip (if needed for cm13 based roms)
reboot / system
enjoy
Click to expand...
Click to collapse
Again, the issue is that I can't install any ROM through TWRP, because trying to instantly reboots the phone and brings me back into TWRP. I've tried reflashing TWRP, but it doesn't do anything.
Update: I fixed it! For some reason TWRP was recognizing my SD card up until I started flashing. I just put the ROM in my internal storage instead of the SD card, and then the ROM was flashed with no problems. Thanks to those who tried to help me out!
radiobacter said:
Update: I fixed it! For some reason TWRP was recognizing my SD card up until I started flashing. I just put the ROM in my internal storage instead of the SD card, and then the ROM was flashed with no problems. Thanks to those who tried to help me out!
Click to expand...
Click to collapse
The phone is known to be finicky about sd cards. Try formatting it with TWRP
Sent from my SM-N920T using Tapatalk

[recovery] [modded] twrp 3.2.1-0 [oreo support]

With this modded version of TWRP you can now install A1 roms into the 5X.
How to install A1 roms using this TWRP:
https://forum.xda-developers.com/mi-5x/how-to/guide-how-to-install-a1-rom-5x-t3777139
Oreo Modded TWRP 3.2.1-0 Download:
Google Drive
Nougat Modded TWRP 3.2.1-0 Download:
Google Drive
How to install:
- Unlock bootloader
- Enter in Fastboot Mode (Power Button + Vol Down)
- Flash using "fastboot flash recovery twrp.img"
- Enter in Recovery Mode (Power Button + Vol Up)
Which one should I download?
You should install the correspondent version according to your currently installed Android version. If your current system is Nougat, you should flash Nougat TWRP. Same for Oreo. It doesn't matter which version of Android are you going to install, but the one that you already have installed. If you are in Nougat and want to flash Oreo rom, after flashing it, be sure to flash Oreo TWRP. If you dont do it, recovery may not work.
How can I use the port feature?
First, download an A1 fastboot ROM. You can do so here. Then, flash system and boot partitions using fastboot.
After you flashed it, go to "Advanced" then tap on "Terminal". Write "a1to5x" and press Enter. Wait until it finishes. Make proper wipes and reboot.
Are there any other features?
I have enabled system.img and modem.img flashing, so people without a pc can flash A1 fastboot roms. But be careful, system.img can't be a sparse image (this are the images included on the a1 official fastboot rom), it should be a raw ext4 image. You can use simg2img to convert them. Modem.img can't neither be flashed directly from the downloaded fastboot rom. It should be a modem.img extracted with dd, you will need to ask some who flashed it with fastboot to extract it for you. I know it is not a very easy process, but at least people without pc now have a chance to update their phones.
In what roms does it works?
I have only tested it with official Android One Oreo rom, however, it should work with Nougat Android One and with custom roms. Try it and let me know in what roms does it work.
How do you port A1 roms to the 5X?
I have been asked this question a lot of times. I can't give a step by step guide since I don't have enough spare time to make a decent guide. If you are interested on the porting process, take a look at /sbin/a1to5x (inside twrp ramdisk), it is the script which takes cares of the automatic porting process. Inside it you will find how the ports are made.
Where is the changelog?
You can check it here
Donations:
If you like my work and want to contribute, you can donate via paypal.me/aex12
Device Tree: https://github.com/Aex12/android_device_xiaomi_tiffany
Manifest used: https://github.com/minimal-manifest-twrp/platform_manifest_twrp_omni
XDA:DevDB Information
Modded TWRP 3.2.1, Tool/Utility for the Xiaomi Mi 5X
Contributors
Aex12
Source Code: https://github.com/omnirom/android_bootable_recovery/
Version Information
Status: Stable
Current Stable Version: 3.2.1
Created 2018-03-07
Last Updated 2018-03-08
Reserved
Love Man... You Are Love Brother
is it normal that the external memory is not shown?
@Aex12
Thanks for your great work. I have some question.
Should we install an whole A1 fastboot rom or only install system.img and boot.img like the old one?
vangame said:
@Aex12
Thanks for your great work. I have some question.
Should we install an whole A1 fastboot rom or only install system.img and boot.img like the old one?
Click to expand...
Click to collapse
Forgot to mention it on the thread. Thanks for reminding, I am updating it right now. You should only flash system and boot. Modem and other firmware partitions can be flashed too, but they are not mandatory.
And have someone test LineageOS 15.1 for Mi A1 with this recovery?
Awesome work @Aex12. Thanks a lot
Hello can I use it at tissot bootloader?
eurekaseven said:
is it normal that the external memory is not shown?
Click to expand...
Click to collapse
That was somthing I also have noticed.. without sd memory being shown I can't do a backup to SD Card.
Instead I'll have to do a local backup and connect to PC and copy files over, Early stages I guess we are lucky we can even see the Internal Memory right?
Alright so I was curious and thought I'd see what happens if I flash recovery Nougat Modded TWRP 3.2.1-0 ( While currently running Oreo )
I booted into recovery and instantly discovered that you no longer even have access to internal memory 0b shown.. Don't waste your time !
I flashed recovery Oreo Modded TWRP 3.2.1-0 using fast boot as you won't be able to flash a recovery rom using TWRP in this state..
https://www.xda-developers.com/how-to-install-twrp/
Shows an easy guide if you aren't sure howto do this
Can not get back to MIUI Nougat or even get old recovery to work
When i try to install back xiaomi.eu's miui rom after installing zip and do all the proper wipes, it reboot to system but says that encryption was interrupted and can't complete. So I tried to install back the nougat 3.2.1 recovery and try again, with the same result. again i tried to install the rom again with 3.1.1 recovery and same happens. With nougat recovery it can't mount any partition, so it can not opperate properly, only the oreo recovery works. the only rom that works and gets installed good is the oreo one that you submitted so what can i do to get back to my normal twrp recovery (no oreo) and to a miui rom? thanks
P.D: I also tried to flash with fastboot a a1 nougat rom and with the 3.1.1 twrp port it but no succes as it can no longer mount anything, only oreo twrp is working but still not get to work properly any other rom, via fastboot or via recovery. Bootloader is unlocked.
What phone and model is this 4? It states nothing
hi,
i tried to flash system.img from official MiA1 fastboot ROMs today but i got these message " target reported max download size of 536870912 bytes, is this a normal message? will the flash resume?
vangame said:
And have someone test LineageOS 15.1 for Mi A1 with this recovery?
Click to expand...
Click to collapse
I want to know this too!
Aex12 said:
Aex12, Brother Please Fix SD issue... Cant flash files from my SD Card.
Click to expand...
Click to collapse
Comparing fstab with stock recovery / sd supported recovery might fix this issue...
This recovery doesn't read my SD card. Only the internal storage.
>Modem.img can't neither be flashed directly from the downloaded fastboot rom. It should be a modem.img extracted with dd, you will need to ask some who flashed it with fastboot to extract it for you
Yeah, anyone willing to do it for me?
udaan said:
>Modem.img can't neither be flashed directly from the downloaded fastboot rom. It should be a modem.img extracted with dd, you will need to ask some who flashed it with fastboot to extract it for you
Yeah, anyone willing to do it for me?
Click to expand...
Click to collapse
Make sure to make a backup of your current modem, just in case.
It's from v9.5.9.0: https://mega.nz/#!UAhwAQLY!-8np_yuZnJscEUFh9bJuCkkqDkPuZrr8Aa6o0kkBq5Q
My 5x does not go to recovery mode. My ROM is AOSPE. I am using OREO twrp. The device is not ROOTED
I can boot twrp using
Code:
fastboot boot twrp.img
but after using
Code:
fastboot flash recovery twrp.img
the phone does not go to recovery using Volume up + Power
tuhi009 said:
My 5x does not go to recovery mode. My ROM is AOSPE. I am using OREO twrp. The device is not ROOTED
I can boot twrp using
Code:
fastboot boot twrp.img
but after using
Code:
fastboot flash recovery twrp.img
the phone does not go to recovery using Volume up + Power
Click to expand...
Click to collapse
I think you need to fastboot flash boot image first, then go to twrp and flash it again from it.
---------- Post added at 08:14 AM ---------- Previous post was at 08:06 AM ----------
@Aex12 please update TWRP. I can't format /data /system etc from twrp made for MiA1(MohanCM's) but I cannot do it with yours. I have mi5x and it is ****ing stuck on boot. If I flash MiA1's fastboot rom I can get to fastboot and flash TWRP (since the bootloader is locked) but I can't do anything with your TWRP. But I can also flash MohanCM's twrp and I can do all that stuffs except for installing ROms and booting to it. im ****ing confused myself.

Can somebody help me please!

So hey! I successfully booted into the TWRP and used it to flash the DISABLEFORCEENCRYPTION file, right after. I decided to reboot to recovery (Cause I think that would be great just after you flash something in TWRP) but then after it finishes showing the pocophone booting screen rather than showing TWRP recovery. It showed the stock MIUI recovery! someone please help! I just finished flashing magisk and a custom rom by using the method of: Everytime I need to flash something using TWRP I would just open adb and fastboot boot recovery it again so that I could use the TWRP!
Thank you in advance!
GGerniWhite said:
So hey! I successfully booted into the TWRP and used it to flash the DISABLEFORCEENCRYPTION file, right after. I decided to reboot to recovery (Cause I think that would be great just after you flash something in TWRP) but then after it finishes showing the pocophone booting screen rather than showing TWRP recovery. It showed the stock MIUI recovery! someone please help! I just finished flashing magisk and a custom rom by using the method of: Everytime I need to flash something using TWRP I would just open adb and fastboot boot recovery it again so that I could use the TWRP!
Thank you in advance!
Click to expand...
Click to collapse
I decided to fix this problem after I flashed a rom cause I think I would run into future problems involving magisk and it's use of the TWRP recovery.
GGerniWhite said:
I decided to fix this problem after I flashed a rom cause I think I would run into future problems involving magisk and it's use of the TWRP recovery.
Click to expand...
Click to collapse
If you already have the ROM installed, use adb to flash TWRP and without booting flash Magisk and then boot to system. If you are on stock ROM, follow THIS.
For entering into TWRP, use the key combination of volume up + power buttons.
You can use the encryption compatible TWRP (search for it) instead of the official one.

Flashing recovery - keeps reverting to stock after reboot

Hi peeps
New Pocophone owner here. I got my bootloader unlocked earlier today and now trying to flash the official TWRP 3.3.0.0 recovery from twrp.me, simply following the fastboot instructions on the device guide.
However every time I reboot the device, the recovery always reverts to the stock MIUI recovery?
What am I doing wrong here?
I just got the phone and have upgraded it to MIUI 10.3.6 as well. I am wanting to flash pixel experience onto it.
Do following, instead of flashing your recovery.
Use this method boot and flash Magisk. Reboot back to your system and install Flashify and install your choosen Recovery with it
jonske said:
Hi peeps
New Pocophone owner here. I got my bootloader unlocked earlier today and now trying to flash the official TWRP 3.3.0.0 recovery from twrp.me, simply following the fastboot instructions on the device guide.
However every time I reboot the device, the recovery always reverts to the stock MIUI recovery?
What am I doing wrong here?
I just got the phone and have upgraded it to MIUI 10.3.6 as well. I am wanting to flash pixel experience onto it.
Click to expand...
Click to collapse
in stock rom you need to flash magisk right after flashing twrp else it will get replaced by stock
jonske said:
Hi peeps
New Pocophone owner here. I got my bootloader unlocked earlier today and now trying to flash the official TWRP 3.3.0.0 recovery from twrp.me, simply following the fastboot instructions on the device guide.
However every time I reboot the device, the recovery always reverts to the stock MIUI recovery?
What am I doing wrong here?
I just got the phone and have upgraded it to MIUI 10.3.6 as well. I am wanting to flash pixel experience onto it.
Click to expand...
Click to collapse
What the post above says is correct. However, if you don't want Magisk, after flashing TWRP, reboot into recovery and then into system. You may retain TWRP. However, this doesn't work for everyone.
Hi all, I fixed the issue by completely wiping my phone via TWRP and clean flashing pixel experience ROM. After rebooting on pixel rom TWRP persists.
It appears that MIUI rom has something that keeps reverting it to stock MI-recovery.
If you are on MIUI and flashing TWRP, once the recovery is up for the first time, you need to head on to reboot>recovery again in order to overwrite MIUI stock recovery. So the whole process would be like this;
i) Fastboot flash recovery twrp.img (or whatever the name of the image)
ii) Fastboot boot recovery
iii) Once TWRP is up, Swipe to allow modification and then go to Reboot>Recovery and reboot into TWRP once more. That's it! You have just overwritten the stock recovery and are now on TWRP!! Now you can reboot to system and TWRP will remain on your device. There's no need to flash Magisk etc if you want just TWRP and nothing else.
Rowdyy Ronnie said:
If you are on MIUI and flashing TWRP, once the recovery is up for the first time, you need to head on to reboot>recovery again in order to overwrite MIUI stock recovery. So the whole process would be like this;
i) Fastboot flash recovery twrp.img (or whatever the name of the image)
ii) Fastboot boot recovery
iii) Once TWRP is up, Swipe to allow modification and then go to Reboot>Recovery and reboot into TWRP again. That's it! You have just overwritten the stock recovery and are now on TWRP!! There's no need to flash Magisk etc if you just want TWRP and nothing else.
Click to expand...
Click to collapse
I did those exact steps and it didn't work. It ALWAYS kept getting overwritten.
jonske said:
I did those exact steps and it didn't work. It ALWAYS kept getting overwritten.
Click to expand...
Click to collapse
Did you follow step 3? You can't boot into system right after twrp is up for the first time. You need to reboot into twrp twice before you boot into system. This is what I do whenever I flash twrp and it never failed me yet.
Rowdyy Ronnie said:
Did you follow step 3? You can't boot into system right after twrp is up for the first time. You need to reboot into twrp twice before you boot into system. This is what I do whenever I flash twrp and it never failed me yet.
Click to expand...
Click to collapse
Yes, I even flashed the recovery image from within TWRP and rebooted to recovery again. Still didn't work.
Note this was on the new 10.3.6 stable MIUI release that got rolled out recently. Not sure if it has new detection or anything that rolls it back.
Anyway I have resolved my issue now all is good.
jonske said:
Yes, I even flashed the recovery image from within TWRP and rebooted to recovery again. Still didn't work.
Note this was on the new 10.3.6 stable MIUI release that got rolled out recently. Not sure if it has new detection or anything that rolls it back.
Anyway I have resolved my issue now all is good.
Click to expand...
Click to collapse
How did you fix it?

Unofficial TWRP now available

Was searching in preparation of my K30 arriving, and found an unofficial version of TWRP is now available.
https://www.google.com/amp/s/unofficialtwrp.com/unofficial-twrp-3-3-1-xiaomi-redmi-k30/amp/
Note: I've not tried it myself, as I don't have the phone yet.
It's a none working TWRP ripped from a dev who was working on it. don't even test it guys. Devs at .eu made one that actually works.
https://xiaomi.eu/community/threads/twrp.53906/page-8
ddaggebi said:
It's a none working TWRP ripped from a dev who was working on it. don't even test it guys. Devs at .eu made one that actually works.
https://xiaomi.eu/community/threads/twrp.53906/page-8
Click to expand...
Click to collapse
please give instalation guide also
ddaggebi said:
It's a none working TWRP ripped from a dev who was working on it. don't even test it guys. Devs at .eu made one that actually works.
https://xiaomi.eu/community/threads/twrp.53906/page-8
Click to expand...
Click to collapse
Thanks for the info @ddaggebi
I used the K30 TWRP from https://xiaomi.eu/community/threads/twrp.53906/page-8#post-528914 to fastboot boot to TWRP and dump stock boot, recovery and misc (using e.g. `dd=/dev/block/bootdevice/by-name/boot of=/tmp/boot.img`). Then I patched the boot.img with Magisk Manager Canary. :good:
Any idea why that TWRP recovery installer .bat overwrites the misc partition? Temp booting the .img directly with fastboot boot seemed to work fine without their patched misc, so I'm sticking with that for now.
Again, be sure to fastboot boot recovery and then dump your ROM's misc first if you plan on flashing the recovery using that batch script, since you might need to flash it back along with the ROM's recovery for OTAs to succeed.
I can understand rooting here but is twrp installed permanently here? I mean to flash any rom do we always need fastboot command to boot twrp or its staying always and working normally??
Hard_Rock83 said:
I can understand rooting here but is twrp installed permanently here? I mean to flash any rom do we always need fastboot command to boot twrp or its staying always and working normally??
Click to expand...
Click to collapse
Yes. But some features are limited for now.
btw I installed eu rom in case stock rom replaces TWRP to stock recovery.
osm0sis said:
I used the K30 TWRP from https://xiaomi.eu/community/threads/twrp.53906/page-8#post-528914 to fastboot boot to TWRP and dump stock boot, recovery and misc. Then I patched the boot.img with Magisk Manager Canary. :good:
Any idea why that TWRP recovery installer .bat overwrites the misc partition? Temp booting the .img directly with fastboot boot seemed to work fine without their patched misc, so I'm sticking with that for now.
Also here is the latest Magisk Canary (20308) patched stock boot.img to simplify rooting for those just getting started on this device. Simply fastboot flash boot it..
Click to expand...
Click to collapse
Ok so the question is can we reboot to recovery normally or we need to manually type fastboot command to boot to recovery..
I am still searching for twrp , which can normally appears while rebooting to recovery
LR.Team twrp-3.4.0-0209 will be installed by default when you install Eu rom.
I can reboot into recovery as normal (by pressing "vol up" & "power" button). To install root, I can simply go to "Advanced" -> "Install Root" or by using boot.img method. One thing which I can't do is deleting (or changing file name) to system file to remove some of the unwanted app.
It works very well
https://xiaomi.eu/community/threads/twrp.53906/page-8#post-528914

Categories

Resources