hi guys iive unlocked my evo with the htcdev mod and no problem has come out , bun i'm unable to run any recovery.
iìve tryed all cwm twrp and any i found on the site.
i try with fastboot method and abd, all say that the recovery vas written , no error but when i try to lunch recovery the phone show the htc logo stay 10/15 second then reboot the phone.
pls help me
Have you tried downloading the twrp pg86img.zip & make sure it's named PG86IMG.zip then put it on the root of you're sdcard, boot into bootloader and update that way?
CM powered EVO 3D, enough said.
luca73n said:
hi guys iive unlocked my evo with the htcdev mod and no problem has come out , bun i'm unable to run any recovery.
iìve tryed all cwm twrp and any i found on the site.
i try with fastboot method and abd, all say that the recovery vas written , no error but when i try to lunch recovery the phone show the htc logo stay 10/15 second then reboot the phone.
pls help me
Click to expand...
Click to collapse
when the device either hangs on the htc logo or reboots while on the htc logo, it means there is an issue with the actual kernel/ramdisk.
when dealing with a custom recovery, they should always boot without any issues. the best suggestion off the top of my head is to make sure if you're on the CDMA version, use the shooter recovery and if you're on the GSM version, use the shooteru version of the custom recovery.
otherwise, as suggested above, reflash the confirmed correct custom recovery for your device. there are a few ways to flash the custom recovery although, being you used the htc unlock method, regular custom recovery mode will not have write access to the boot/kernel partition.
if you're interested in loading any ROMs which come with kernels or separately flashing a custom kernel, there are essentially two complete methods:
1) use my Flash Image GUI app from normal android mode to flash the kernel. then flash the ROM from custom recovery.
2) use fastboot boot c:\android\cwm-recovery.img . this will temporarily boot the custom recovery and htc unlock will grant it write access to the kernel/boot partition. this command is different than fastboot flash recovery c:\android\cwm-recovery.img. the fastboot boot will temporarily boot into the custom recovery while fastboot flash will permanently write it into the recovery partition.
hope all the extra details make sense and helps!
Ummm.....Just my 2 cents, but it sounds as though the most basic possible problem has been overlooked here. You need to go into menu>settings>power and uncheck the "fast boot" box or do a battery pull, then try to boot into your bootloader to access recovery. With your phone completely powered down (fast boot unchecked or after battery pull), hold volume down and press power. That will put you in your bootloader with an option to boot recovery from there.
ok i'm a noob i've used thr shooter and not the shooteru cwm img, now all works
ty guys
I had stuck on ASUS logo, after I do a lot of researches, a lot of trials and errors for 4 hours. I managed to fix them and I wanted to share how I did here.
Easiest way to root lollipop WW-12.2.2.27
use KingRoot from http://www.kingroot.net/down ,It is android app which will run exploit to root the device successfully.
Not Kingoroot Kingoroot was unable to root. Towelroot v1 works only on Kitkat, but not lollipop.
To boot into fastboot mode
adb reboot bootloader
OR turn off device, press and hold power and volume up, until asus logo appear, and stuck at asus logo, that is fastboot mode, to exit fastboot with buttons, press and hold vol down and power button.
To restore stock recovery and ROM after you install TWRP or CWM, or unbrick device
First, note that stock recovery from http://forum.xda-developers.com/showpost.php?p=59055653&postcount=29, does not work for me (maybe everyone else as well).
I flashed it using fastboot flash recovery recovery.img, when I try to boot into recovery using, vol down and power, then select enter recovery, it stucks at asus logo.
First you need to flash TWRP_2.8.7.0.img from http://quarx2k.ru/asus_padfone_s/recovery/
using fastboot flash recovery TWRP_2.8.7.0.img It will show that flashing FAILED (remote: can't flash unsigned image), it fact, it was succeeded, now you can go ahead and boot to recovery.
Note that this version of TWRP, and 2.8.6.0, and CWM cannot successfully flash stock zip ROM, it may show errors, or when you try to boot the device, it will stuck at ASUS logo. But now, we are going to need TWRP_2.8.7.0 to unlock bootloader.
Let's unlock bootloader
simply flash http://quarx2k.ru/asus_padfone_s/CrowLock_RC3.zip with TWRP
You can check bootloader status with fastboot oem device-info
Before unlock :
(bootloader) Device unlocked: false
After unlock
(bootloader) Device unlocked: true
Let's flash stock Kitkat Firmware
You have to unlock bootloader becuase, well it is complicated.
The only TWRP recovery that can successfully flash stock .zip firmware from ASUS is http://datbak.com/links/padfone_s/asus_t00n_twrp_2_7_1_1.img
But this recovery has another bug, if you flash recovery and try to boot to recovery, you will get blank screen, but TWRP is indeed working, you touch the screen and it vibrates back. Anyway you have tofastboot flash recovery asus_t00n_twrp_2_7_1_1.img because it will be needed later for upgrading Kitkat to Lollipop.
If you don't unlock bootloader, you will not be able to boot into recovery directly without flashing to recovery partition Now let's get into fastboot mode, and fastboot boot asus_t00n_twrp_2_7_1_1.img, by booting into this recovery directly via fastboot without flashing it first, you will not get black screen bug of this recovery., if you boot to this recovery from recovery partition, you will get black screen as I told previously.
Now let's flash downgrade to 4.4.2 firmware from http://dlcdnet.asus.com/pub/ASUS/Mobile_Phone/PadFone_S/UL-ASUS_T00N-WW-99.99.99.0-user-wipedata.zip with TWRP 2.7.1.1.
This is for only WW SKU, not TW SKU. And all userdata will be wiped.
Browse all firmwares and there is TW SKU downgrade here : https://www.asus.com/Phone/PadFone_S_PF500KL/HelpDesk_Download/
Ok, now reboot to system, and yeah, it finally boots now.
The recovery is still TWRP, not stock one, let's upgrade to lollipop and restore stock recovery using TWRP. Simply place http://dlcdnet.asus.com/pub/ASUS/Mobile_Phone/PadFone_S/UL-ASUS_T00N-WW-12.2.2.27-user.zip to root of Internal Memory, unplug usb, press confirmation in notification to begin install lollipop. After device reboot, it will stay blank screen for 5 minutes, don't worry, it is updating to lollipop, after upgrade is done, it will reboot, and recovery will be restored to stock recovery now.
Bootloader is still unlocked.
Another method to root is
fastboot flash recovery asus_t00n_twrp_2_7_1_1.img (recovery is restored to stock now remember)
then flash https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip?retrieve_file=1 with TWRP.
To lock bootloader again, boot into fastboot
then fastboot oem reset-dev_info
But I wouldn't recommend you to lock bootloader, you will lose ability to boot to TWRP recovery without replacing stock recovery, unless you are going to send your device to service center and claim warranty.
Files, fastboot and recoveries and bootloader unlock and super su for rooting
asus_t00n_twrp_2_7_1_1.rar https://mega.nz/#!355UmTCb!0Jn-0wlbGHG7lir8u9vq1l8BrR3dsepDdigqfJ9wRPk
twrp_2.8.7.0.rar https://mega.nz/#!GwRRBBjT!8ms39GK62XHairHOrxlmNJCwA-bDeaKA816Cg4lsQr0
Will this work for S Plus model?
It wont, using files from this thread might brick the device.
Sent from my SM-N910C using XDA Free mobile app
Hi im a noob so ill get straight to the point.
You said "Note that this version of TWRP, and 2.8.6.0, and CWM cannot successfully flash stock zip ROM, it may show errors, or when you try to boot the device, it will stuck at ASUS logo."
I have two question as follow:
1. So can i use twrp to flash stock rom or not?
2. Because I'm still at Kit Kat, I dont need to unlock bootloader and flash Kit Kat firmware right?
3. If so, Can I follow the tutorial until flashing the TWRP? but which TWRP that I need to install?
4. All these tutorial to unbrick needs to be done before you brick your phone right? What should i do if i already brick my phone?
Kindly advise.
ChevanLemon said:
Hi im a noob so ill get straight to the point.
You said "Note that this version of TWRP, and 2.8.6.0, and CWM cannot successfully flash stock zip ROM, it may show errors, or when you try to boot the device, it will stuck at ASUS logo."
I have two question as follow:
1. So can i use twrp to flash stock rom or not?
2. Because I'm still at Kit Kat, I dont need to unlock bootloader and flash Kit Kat firmware right?
3. If so, Can I follow the tutorial until flashing the TWRP? but which TWRP that I need to install?
4. All these tutorial to unbrick needs to be done before you brick your phone right? What should i do if i already brick my phone?
Kindly advise.
Click to expand...
Click to collapse
The only TWRP recovery that can successfully flash stock .zip firmware from ASUS is asus_t00n_twrp_2_7_1_1.img
If you are bricked, but you can still access fastboot mode, then you can unbrick and reflash stock firmware to your phone
First of all, Thank you so much for this GUIDE
Here are my doubts, and hoping for confirmation from you. My Padfone S is running well on latest kitkat firmware, rooted with SuperSu and TWRP 2.7.1.1 installed. Now, I wished to upgrade to Lollipop firmware.
Can I use the TWRP 2.7.1.1 to clean install the lollipop firmware instead of the stock recovery because I wished to wipe date, cache as well as SYSTEM before flashing?
My concern is I afraid if wipe the SYSTEM then the TWRP 2.7.1.1 would not be able to flash the Lollipop firmware successfully. Do I need to unlock bootloader in my case?
If I can do so, then can I still use the Flashify to flash TWRP 2.7.1.1 on the lollipop firmware, or I must use "fastboot flash recovery TWRP_2.8.7.0.img" method.
Thanks in advance for your kindly reply.:laugh:
Bootlooped
When I am upgrading my SuperSU and it requires a reboot,it automatically boot looped itself.
What should I do?
Linux4ever85 said:
Will this work for S Plus model?
Click to expand...
Click to collapse
Yes it work. Mine is Asus Padfone S Plus. Got bootloop problem. I have followed ninekaw guide. Thanks Ninekaw. U have save my precious padfone s plus
ninekaw9 said:
I had stuck on ASUS logo, after I do a lot of researches, a lot of trials and errors for 4 hours. I managed to fix them and I wanted to share how I did here.
Easiest way to root lollipop WW-12.2.2.27
use KingRoot from http://www.kingroot.net/down ,It is android app which will run exploit to root the device successfully.
Not Kingoroot Kingoroot was unable to root. Towelroot v1 works only on Kitkat, but not lollipop.
To boot into fastboot mode
adb reboot bootloader
OR turn off device, press and hold power and volume up, until asus logo appear, and stuck at asus logo, that is fastboot mode, to exit fastboot with buttons, press and hold vol down and power button.
To restore stock recovery and ROM after you install TWRP or CWM, or unbrick device
First, note that stock recovery from http://forum.xda-developers.com/showpost.php?p=59055653&postcount=29, does not work for me (maybe everyone else as well).
I flashed it using fastboot flash recovery recovery.img, when I try to boot into recovery using, vol down and power, then select enter recovery, it stucks at asus logo.
First you need to flash TWRP_2.8.7.0.img from http://quarx2k.ru/asus_padfone_s/recovery/
using fastboot flash recovery TWRP_2.8.7.0.img It will show that flashing FAILED (remote: can't flash unsigned image), it fact, it was succeeded, now you can go ahead and boot to recovery.
Note that this version of TWRP, and 2.8.6.0, and CWM cannot successfully flash stock zip ROM, it may show errors, or when you try to boot the device, it will stuck at ASUS logo. But now, we are going to need TWRP_2.8.7.0 to unlock bootloader.
Let's unlock bootloader
simply flash http://quarx2k.ru/asus_padfone_s/CrowLock_RC3.zip with TWRP
You can check bootloader status with fastboot oem device-info
Before unlock :
(bootloader) Device unlocked: false
After unlock
(bootloader) Device unlocked: true
Let's flash stock Kitkat Firmware
You have to unlock bootloader becuase, well it is complicated.
The only TWRP recovery that can successfully flash stock .zip firmware from ASUS is http://datbak.com/links/padfone_s/asus_t00n_twrp_2_7_1_1.img
But this recovery has another bug, if you flash recovery and try to boot to recovery, you will get blank screen, but TWRP is indeed working, you touch the screen and it vibrates back. Anyway you have tofastboot flash recovery asus_t00n_twrp_2_7_1_1.img because it will be needed later for upgrading Kitkat to Lollipop.
If you don't unlock bootloader, you will not be able to boot into recovery directly without flashing to recovery partition Now let's get into fastboot mode, and fastboot boot asus_t00n_twrp_2_7_1_1.img, by booting into this recovery directly via fastboot without flashing it first, you will not get black screen bug of this recovery., if you boot to this recovery from recovery partition, you will get black screen as I told previously.
Now let's flash downgrade to 4.4.2 firmware from http://dlcdnet.asus.com/pub/ASUS/Mobile_Phone/PadFone_S/UL-ASUS_T00N-WW-99.99.99.0-user-wipedata.zip with TWRP 2.7.1.1.
This is for only WW SKU, not TW SKU. And all userdata will be wiped.
Browse all firmwares and there is TW SKU downgrade here : https://www.asus.com/Phone/PadFone_S_PF500KL/HelpDesk_Download/
Ok, now reboot to system, and yeah, it finally boots now.
The recovery is still TWRP, not stock one, let's upgrade to lollipop and restore stock recovery using TWRP. Simply place http://dlcdnet.asus.com/pub/ASUS/Mobile_Phone/PadFone_S/UL-ASUS_T00N-WW-12.2.2.27-user.zip to root of Internal Memory, unplug usb, press confirmation in notification to begin install lollipop. After device reboot, it will stay blank screen for 5 minutes, don't worry, it is updating to lollipop, after upgrade is done, it will reboot, and recovery will be restored to stock recovery now.
Bootloader is still unlocked.
Another method to root is
fastboot flash recovery asus_t00n_twrp_2_7_1_1.img (recovery is restored to stock now remember)
then flash https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip?retrieve_file=1 with TWRP.
To lock bootloader again, boot into fastboot
then fastboot oem reset-dev_info
But I wouldn't recommend you to lock bootloader, you will lose ability to boot to TWRP recovery without replacing stock recovery, unless you are going to send your device to service center and claim warranty.
Click to expand...
Click to collapse
simply flash http://quarx2k.ru/asus_padfone_s/CrowLock_RC3.zip with TWRP --> link dead
Hi thank for your guidance on how restoring stock rom . Im having trouble detecting my phone when in fastboot mode, as you said to boot up into fastboot hold vol up and power and we will stuck at asus logo , but after i connect my pc and using adb cmd fastboot devices it didnt detect any devices and cant proceed to next step when i need to fastboot boot twrp 2.7.1.1
Currently im using twrp 2.8.7.0 , i want to use stockcrom because i need to use my padfone station (since any custom rom is not compatible with padfone station), any suggestions for this problem ? Thanks in advabce
Hi. I have had the OnePlus X for a very long time, and I have recently bricked .
Ok, here it goes :fingers-crossed:. I had a OnePlus X running CM13 with TWRP but a locked bootloader. I decided to try cyanogenmod recovery but soon realized it was terrible.
I was unable to flash img. files and the UI was unappealing to me. However at that point I was able to reboot into my ROM (CM13) with no issues. Knowing this, I thought that the only way I could get TWRP back was through a fastboot command (fastboot flash recovery recovery.img).
For me to execute that command, I needed to unlock my bootloader first, so I took all the necessary steps in the developer options settings menu. I then booted into fastboot mode and executed this command: fastboot oem unlock. This was my big mistake, as I read up after that you should not unlock bootloader on a custom recovery.
After executing this command, it booted me into recovery. I tried many times without success to wipe data and flash a rom zip via external sd card but they never worked. To make things worse, I was unable to boot up the device. Whenever I tried to power on the device, it booted straight into recovery. I am able to boot into fasboot and recovery, but that is pretty much it. Can someone please help me? I am willing to donate.
If you were able to flash the Cyanogen recovery with a locked bootloader you should be able to flash the official OPX recovery as well. You can download that from this link: https://s3.amazonaws.com/oxygenos.oneplus.net/OPX_recovery.img
Then you should be able to unlock the bootloader!
Or if @Tanner1294's doesn't help, flashing stock rom via fastboot will surely help..
PS: Don't ever flash anything on a locked bootloader.
No matter how I try to flash the TWRP recovery image to the recovery partition, TWRP gets replaced by the crappy stock recovery!! This is absolutely maddening!
Specifically, it seems that no matter what method to use to flash the TWRP recovery, it gets overriden by the stock loader when the phone reboots.
My bootloader is UNLOCKED and I've installed a custom rom just fine by using the command fastboot boot twrp.img to boot into the twrp image. This is the only way I'm able to use TWRP at all.
I've tried:
fastboot flash recovery twrp.img
Booting into TWRP, and flashing the image over the recovery partition
Flashify to flash the TWRP over the recovery partition from within the rom
Trying to flash cyangenmod's recovery from within the rom (was pretty desperate at this point..)
I've also tried many different versions of TWRP, I can boot into them just fine but none of them stick when I flash them to the recovery partition.
It always says it's successful when I try to flash it, I reboot into recovery, and it boots into the piece of crap EmUI stock recovery screen every time
Anyone have any pointers here? It's not the end of the world but it's pretty aggravating having a completely useless recovery if I'm not near a computer,.
Try using Flashify or Flashfire.
Sadly didn't work. It doesn't seem to matter how I flash the recovery, the bootloader replaces it with the stock recovery when it boots. I'll update the OP to clarify, but thank you
I am having same issue have you found a fix
Have you tried starting completely over? Like, downloading the official MM build (b331, C564D003) from Huawei (Assuming you're on L24)?
On the new, freshly installed ROM, make sure that USB Debugging is and enable OEM Unlock are on in the developer settings.
Then, try flashing this build of TWRP again.
Before rebooting, do a Cache/Dalvik Wipe.
Boot up into the stock rom, then use 'adb reboot recovery' to see what happens next. It should work...
Hi mate,
It'd be easier to help you if you could post a screenshot of your FASTBOOT screen. There will be a line that will say FRP=LOCKED/UNLOCKED something like this.
if it is locked,
you have to install stock rom & enable OEM unlock from setting.
Then relock the boot loader. Then again unlock the boot loader.
For myself, I unlocked my BL unofficially, & this problem occurred . I solved it this way...
Hope it helps.
Cheers!
Hey!
I Have a Kate running latest global developer that i unlocked officially through the mi unlock program.
I have been trying to install TWRP ( unoffical twrp, Alka, coffee) through ADB ( fastboot flash recovery twrp.img) for some days now but i wont work!!
ADB dont displays any errors and says everything finished but when i try to boot to recovery it's still stock xiaomi recovery??
What might be the problem and how do i fix it?
BTW, adb reports that the phone is unlocked (fastboot oem device-info).
Are you trying to boot TWRP straight after flashing it. If your booting the official rom first, then that is restoring stock recovery.
After flashing TWRP, manually boot the device with Vol + and Power button.
Alternatively boot TWRP with "fastboot boot <twrp.img>" and from TWRP reboot to recovery again so you actually boot the version on the device.
the newest dev rom has "feature" to revert your recovery back to stock when you boot the OS. so be prepared. after you flash your twrp, immediately boot to TWRP and wipe /system to install other OS.
corkiejp said:
Are you trying to boot TWRP straight after flashing it. If your booting the official rom first, then that is restoring stock recovery.
After flashing TWRP, manually boot the device with Vol + and Power button.
Alternatively boot TWRP with "fastboot boot <twrp.img>" and from TWRP reboot to recovery again so you actually boot the version on the device.
Click to expand...
Click to collapse
IvanKurnia said:
the newest dev rom has "feature" to revert your recovery back to stock when you boot the OS. so be prepared. after you flash your twrp, immediately boot to TWRP and wipe /system to install other OS.
Click to expand...
Click to collapse
THANKS! That was the problem. Now everything works.