help me plz
how to install custom recovery in intex aqua power 2
devil3 said:
help me plz
how to install custom recovery in intex aqua power 2
Click to expand...
Click to collapse
Install Kaush Universal adb driver and adb.
Enable USB debugging on ur phone.
Open adb.
Type "adb devices" without quotation marks and press enter.
If adb shows some device connected, only then proceed further.
Type "adb reboot bootloader" and press enter.
Type "fastboot devices" and press enter.
If adb shows some device connected, only then proceed further.
Type "fastboot flash recovery <recovery IMG file>" and press enter.
Once done, type "fastboot reboot".
Related
EDIT# FIXED
If you come across this problem this how you fix it.
Make sure you have a ROM installed that you can boot to with "Boot Android (No BP)" or "BP HW Diag & Boot AP"
Download ADB (you should have this as you would of used it to unlock the phone). Once downloaded open CMD and CD to the folder.
Boot the phone up and set it to Fastboot.
Then:
type "fastboot devices" Press Enter.
type "fastboot erase recovery" Press Enter.
type "fastboot reboot"
The phone will reboot as normal now. Once you are back into Android you can flash CWM with ROM Manager or TeamWin Recovery with GooManager.
So am I screwed?
Hi All,
I have rooted the phone using king root and it rooted my kitkat, then i downloaded MTKdroid tools and flashed TWRP.
My problem starts here, after flashing using MTK droid tools it does not boot on reccovery but it boot into normal mode. I did a research using fastboot and found that the bootloader is locked. I tried
fastboot oem unlock it shows the disclaimer screen but when i selected the key it says unlock failed. Again i googled out and found some devices are code locked. Is there any method for E311 bootloader unclock.
Your help is very much appreciated
There is no botloader man...
Try this commands. But before paste the recovery image in fastboot folder of ur pc and rename it 'twrp' then open cmd window. And type "adb devices" If u see ur device listed, u can proceed. But if it is not or it shows unauthorised, do the following
1. Install proper drivers on ur pc
2. Enable usb debugging
3. Then connect to pc and bring down ur notification panel of ur phone.Click on usb options and select camera option. Then again enter "adb devices" in pc. Even then if it shows unauthorised, you will see authorisation window in ur phone...
Ur done!!!
U can enter following commands
"adb reboot bootloader"
Wait for some time then
"fastboot flash recovery twrp.img"
Then ur pc screen will show succeeded!!
Then enter
"fastboot reboot"
Ur phone will reboot into normal mode
then enter "adb reboot recovery"
Congo!! U have twrp custom recovery installed
shantanu1999 said:
There is no botloader man...
Try this commands. But before paste the recovery image in fastboot folder of ur pc and rename it 'twrp' then open cmd window. And type "adb devices" If u see ur device listed, u can proceed. But if it is not or it shows unauthorised, do the following
1. Install proper drivers on ur pc
2. Enable usb debugging
3. Then connect to pc and bring down ur notification panel of ur phone.Click on usb options and select camera option. Then again enter "adb devices" in pc. Even then if it shows unauthorised, you will see authorisation window in ur phone...
Ur done!!!
U can enter following commands
"adb reboot bootloader"
Wait for some time then
"fastboot flash recovery twrp.img"
Then ur pc screen will show succeeded!!
Then enter
"fastboot reboot"
Ur phone will reboot into normal mode
then enter "adb reboot recovery"
Congo!! U have twrp custom recovery installed
Click to expand...
Click to collapse
Thanks.......
Is there any recovery available for E 311 ? If yes please post their links
ponpalani2001 said:
Thanks.......
Is there any recovery available for E 311 ? If yes please post their links
Click to expand...
Click to collapse
I just flashed CWM and works great...
Is there any custom rom for E311 ?
I have philz recovery installed on my e311
Can you please share me the recovery.
You have own risk
<<<<ROOT HUAWEI Y6 PRO>>>>>
Prerequisites:
Huawei Y6 pro (TIT-AL00)
ADB drivers (link: https://drive.google.com/file/d/0BzFHE8ZlasNyX2hLRlZLX2hBc1k/view?usp=sharingg)
ADB / Fastboot software (link: https://drive.google.com/file/d/0BzFHE8ZlasNyOWVsTVdLZ0hRQ1k/view?usp=sharing)
CWM Recovery file (link: https://drive.google.com/file/d/0BzFHE8ZlasNyekNYLWhuTE5sLXc/view?usp=sharing )
PreRoot Stock Rom put sd card (link: https://drive.google.com/file/d/0BzFHE8ZlasNyMUFydW9HbnRIY0U/view?usp=sharing
Steps to complete:
1. Install ADB Drivers
2. Unzip ADB software in C: drive
3. put CWM.img in C: drive
---------------------------------------------
4. now
5.Go to settings>about phone>press 7 times builder number
6.Go to developer options, turn on OEM unlock,turn on USB Debugging.
7. Connect phone by USB to computer
-------------------------------------------------------------------------------
8. Startup command prompt (Windows key + R, type cmd, enter)
9. In command prompt, type "cd "
10.In command prompt “adb” to get to the adb directory
11. In command prompt check if device is recognized (typing "adb devices" in the command prompt should show you this)
12. Now reboot the phone into fastboot by typing "adb reboot bootloader"
13. This should reboot the phone into fastboot mode (black screen, only showing "fastboot>" on the bottom
14. In the command prompt, type "fastboot devices" to see if the device is recognized. and get device id number
15.just copy this id number
Your screen should look something like this:
The next command will unlock your phone AND make a hard reset... if any data or settings would need to be preserved, please make a backup!
16. Now type in the command prompt:"fastboot oem unlock XXXXXXXXX " where XXXXXXXX is the unlock code you copied
17,Now unlock conformation for volume + button.
18. Then type in command prompt: "fastboot reboot". After this, your phone will reboot and reset.
19. When Phone is rebooted, make sure USB debugging is on again
(same as point 7)
20. Now reboot the phone into fastboot by typing "adb reboot bootloader"
21. This should reboot the phone into fastboot mode (black screen, only showing "fastboot>" on the bottom
22. In the command prompt, type "fastboot devices" to see if the device is recognized.
23. Now we are going to flash CWM Recovery: type in command prompt: "fastboot flash recovery CWM.img"
24. reboot into recovery by typeing into command prompt: " "fastboot reboot" while holding VOL+ on the phone.
25. When the options screen on the phone appears, press VOL- to select the recovery mode. This will boot into CWM recovery.
26. In CWM recovery mod and wipe menu, wipe data and go back to menu and go to munt... and format System and go back to menu
-You should install the Rom( Install zip... and select the PreRoot Stock Rom) and waiting for install be finish there in step .
27. When flashing is done, type into the command prompt: "adb reboot" to reboot the phone.
7-Your phone boot after 5 until 8 minute.
Credit of: Mahmoud Khorsan(IRAN) andrik22
ArEvoun
Does enabling OEM Unlock from developer options (Android 5.1.1) unlocks the bootloader?
If yes then can I directly flash a custom recovery after enabling OEM Unlock?
ayu321 said:
Does enabling OEM Unlock from developer options (Android 5.1.1) unlocks the bootloader?
If yes then can I directly flash a custom recovery after enabling OEM Unlock?
Click to expand...
Click to collapse
No, it only gives you permission to unlock bootloader.
You will need to unlock bootloader using adb.
Try this,
Download adb and Koush Universal adb driver and install them on ur pc, always install the driver first and don't install the drivers adb setup asks u to install.
Run command prompt as administrator.
Open the folder in c drive where adb is installed, u can use file explorer for this.
Press Shift+right click and select open command window here.
Enable USB debugging on your phone and connect it to the pc by a USB cord.
Enter command "adb devices" without quotation marks.
If it shows some device connected, only then proceed further.
Enter command " adb reboot bootloader"
Enter command " fastboot devices", if it shows some device to be connected, only then proceed further.
Enter command " fastboot oem unlock".
Ur phone may then ask for final confirmation on the phone screen, select yes.
When procedure completes, type "fastboot reboot" and your phone will reboot normally.
Augustoandro said:
No, it only gives you permission to unlock bootloader.
You will need to unlock bootloader using adb.
Try this,
Download adb and Koush Universal adb driver and install them on ur pc, always install the driver first and don't install the drivers adb setup asks u to install.
Run command prompt as administrator.
Open the folder in c drive where adb is installed, u can use file explorer for this.
Press Shift+right click and select open command window here.
Enable USB debugging on your phone and connect it to the pc by a USB cord.
Enter command "adb devices" without quotation marks.
If it shows some device connected, only then proceed further.
Enter command " adb reboot bootloader"
Enter command " fastboot devices", if it shows some device to be connected, only then proceed further.
Enter command " fastboot oem unlock".
Ur phone may then ask for final confirmation on the phone screen, select yes.
When procedure completes, type "fastboot reboot" and your phone will reboot normally.
Click to expand...
Click to collapse
thnx for the reply augustonandro ! but i think im doing something wrong , whenever i type the command adb reboot bootloader my device(Galaxy J200G) restarts instead of rebooting to bootloader . So I just went to my stock recovery and chose option "reboot to bootloader" but still it restarted instead of rebooting to bootloader.
Am I doing something wrong?
ayu321 said:
thnx for the reply augustonandro ! but i think im doing something wrong , whenever i type the command adb reboot bootloader my device(Galaxy J200G) restarts instead of rebooting to bootloader . So I just went to my stock recovery and chose option "reboot to bootloader" but still it restarted instead of rebooting to bootloader.
Am I doing something wrong?
Click to expand...
Click to collapse
Try "adb reboot download" command
If u try
Setting>Developer Option>
Now search
OEM Unlock and enable
Ashwinrg said:
Try "adb reboot download" command
Click to expand...
Click to collapse
this command reboots to download mode not bootloader
guys i just found out this thread:https://forum.xda-developers.com/galaxy-j2/development/dev-samsung-galaxy-j2-lte-t3258147 and it says that just enable OEM Unlock and your bootloader will be unlocked. Is it true?
No, as explained above. That just allows the bootloader to be unlocked via ADB/fastboot (unless the bootloader is locked down like many ZTE phones).
Have you tried "adb reboot-bootloader"?
HI...I know after so many years....But i am having some problem considering my nokia 5 phone....In developer option the OEM unlock is greyed out and i cannot unlock it at all(i cannot toggle it on)....Any possible way i can turn it on....Let me know....Thanks in advance
Thebisboss said:
HI...I know after so many years....But i am having some problem considering my nokia 5 phone....In developer option the OEM unlock is greyed out and i cannot unlock it at all(i cannot toggle it on)....Any possible way i can turn it on....Let me know....Thanks in advance
Click to expand...
Click to collapse
It might already be unlocked
Hi, I am new to this and wanna root my phone...
One click method doesn't work....Can any one please help me out???
Well there are no official guide on the XDA forum yet, maybe try kingroot?
Sent from my iPhone using Tapatalk
ghoul99 said:
Hi, I am new to this and wanna root my phone...
One click method doesn't work....Can any one please help me out???
Click to expand...
Click to collapse
Try this:
UNLOCKING BOOTLOADER:
Download Koush Universal adb driver from koushikdutta.com and adb setup.
Install the driver first and install adb after that.
Type n and press Enter when adb setup asks for installing drivers.
After the installation, run command prompt as administrator.
Open File explorer, and navigate to C:\adb
Please take backup of your data before proceeding further.
In C:\adb press Shift+right click and select Open Command Window here.
Enable USB debugging on your phone and connect your phone to pc using USB cable.
Type "adb devices" without quotation marks and press enter.
If it shows some device to be connected, only then proceed further.
Type "adb reboot bootloader" and press enter.
Phone will boot into fastboot mode.
Type "fastboot devices" and press enter.
If it shows some device to be connected, only then proceed further.
Type "fastboot oem unlock" and press enter.
On the phone screen, the phone will ask for confirmation to unlock bootloader.
Once fastboot shows "Success" or "Done" or something else signifying that the command was successful, type "fastboot reboot" and press enter.
Your phone will reboot normally.
Congrats, you have successfully unlocked bootloader.
ROOTING:
1. For Kingoroot:
Download and install Kingoroot for PC.
Enable USB debugging on your phone and connect your phone to PC using USB cable.
Open Kingoroot.
Connect your pc to internet.
Kingoroot will detect your phone automatically and in a few seconds the root button will come up, click it and wait until the process completes.
Your phone may reboot several times during the process.
Congrats, you have a rooted phone now.
2. For Dr Fone:
Download and install Dr Fone on your PC.
Enable USB debugging on your phone.
Open Dr Fone and select Root option.
Connect your phone to your PC with USB cable.
Dr Fone will detect your phone in a few minutes.
Click "Root" button and wait.
Congrats, you have a rooted phone now.
Hit thanks if found useful.
I've tried PC method as well and still not rooted. I didn't performed the bootloader unlocking through adb though. There's an option of OEM Unlock under developer options. Is that that a problem?
UOTE=Augustoandro;75771341]Try this:
UNLOCKING BOOTLOADER:
Download Koush Universal adb driver from koushikdutta.com and adb setup.
Install the driver first and install adb after that.
Type n and press Enter when adb setup asks for installing drivers.
After the installation, run command prompt as administrator.
Open File explorer, and navigate to C:\adb
Please take backup of your data before proceeding further.
In C:\adb press Shift+right click and select Open Command Window here.
Enable USB debugging on your phone and connect your phone to pc using USB cable.
Type "adb devices" without quotation marks and press enter.
If it shows some device to be connected, only then proceed further.
Type "adb reboot bootloader" and press enter.
Phone will boot into fastboot mode.
Type "fastboot devices" and press enter.
If it shows some device to be connected, only then proceed further.
Type "fastboot oem unlock" and press enter.
On the phone screen, the phone will ask for confirmation to unlock bootloader.
Once fastboot shows "Success" or "Done" or something else signifying that the command was successful, type "fastboot reboot" and press enter.
Your phone will reboot normally.
Congrats, you have successfully unlocked bootloader.
ROOTING:
1. For Kingoroot:
Download and install Kingoroot for PC.
Enable USB debugging on your phone and connect your phone to PC using USB cable.
Open Kingoroot.
Connect your pc to internet.
Kingoroot will detect your phone automatically and in a few seconds the root button will come up, click it and wait until the process completes.
Your phone may reboot several times during the process.
Congrats, you have a rooted phone now.
2. For Dr Fone:
Download and install Dr Fone on your PC.
Enable USB debugging on your phone.
Open Dr Fone and select Root option.
Connect your phone to your PC with USB cable.
Dr Fone will detect your phone in a few minutes.
Click "Root" button and wait.
Congrats, you have a rooted phone now.
Hit thanks if found useful.[/QUOTE]
I've tried PC method as well and still not rooted. I didn't performed the bootloader unlocking through adb though. There's an option of OEM Unlock under developer options. Is that that a problem?
ghoul99 said:
I've tried PC method as well and still not rooted. I didn't performed the bootloader unlocking through adb though. There's an option of OEM Unlock under developer options. Is that that a problem?
Click to expand...
Click to collapse
Just check whether the bootloader is unlocked using fastboot.
Type
fastboot getvar all
Click to expand...
Click to collapse
Augustoandro said:
Try this:
UNLOCKING BOOTLOADER:
Download Koush Universal adb driver from koushikdutta.com and adb setup.
Install the driver first and install adb after that.
Type n and press Enter when adb setup asks for installing drivers.
After the installation, run command prompt as administrator.
Open File explorer, and navigate to C:\adb
Please take backup of your data before proceeding further.
In C:\adb press Shift+right click and select Open Command Window here.
Enable USB debugging on your phone and connect your phone to pc using USB cable.
Type "adb devices" without quotation marks and press enter.
If it shows some device to be connected, only then proceed further.
Type "adb reboot bootloader" and press enter.
Phone will boot into fastboot mode.
Type "fastboot devices" and press enter.
If it shows some device to be connected, only then proceed further.
Type "fastboot oem unlock" and press enter.
On the phone screen, the phone will ask for confirmation to unlock bootloader.
Once fastboot shows "Success" or "Done" or something else signifying that the command was successful, type "fastboot reboot" and press enter.
Your phone will reboot normally.
Congrats, you have successfully unlocked bootloader.
ROOTING:
1. For Kingoroot:
Download and install Kingoroot for PC.
Enable USB debugging on your phone and connect your phone to PC using USB cable.
Open Kingoroot.
Connect your pc to internet.
Kingoroot will detect your phone automatically and in a few seconds the root button will come up, click it and wait until the process completes.
Your phone may reboot several times during the process.
Congrats, you have a rooted phone now.
2. For Dr Fone:
Download and install Dr Fone on your PC.
Enable USB debugging on your phone.
Open Dr Fone and select Root option.
Connect your phone to your PC with USB cable.
Dr Fone will detect your phone in a few minutes.
Click "Root" button and wait.
Congrats, you have a rooted phone now.
Hit thanks if found useful.
Click to expand...
Click to collapse
Tried adb setup but shows no devices attached but when tried with my brother's phone it shows devices are connected.
ghoul99 said:
Tried adb setup but shows no devices attached but when tried with my brother's phone it shows devices are connected.
Click to expand...
Click to collapse
Press the "Revoke USB debugging authorization" in Developer Options.
Connect your phone with pc with the phone screen on and unlocked.
The phone will ask for permission, press OK.
Then type "adb devices" in the terminal as directed in the tutorial before.
It will probably show your device.
Augustoandro said:
Press the "Revoke USB debugging authorization" in Developer Options.
Connect your phone with pc with the phone screen on and unlocked.
The phone will ask for permission, press OK.
Then type "adb devices" in the terminal as directed in the tutorial before.
It will probably show your device.
Click to expand...
Click to collapse
Tried but nothing happened. Looks like currently they don't have drivers for this phone. However thanks for your efforts.
I rooted my q452 using the boot.img-patch method for magisk
meghgoswami said:
I rooted my q452 using the boot.img-patch method for magisk
Click to expand...
Click to collapse
Can you tell me the steps or link to any tutorial?
Thanks either way
Yeah, sure -->
You need to have the unsigned boot.img for the q452, download it from here https://drive.google.com/file/d/127pySEIXj-uRyZpWycfRjaihkYgGv9tR/view?usp=sharing
Install the Magisk Manager apk, open it, click on the Install button next to "Magisk is not installed" and then click on Install again.
Then select "Select and Patch a File" and select the unsigned boot.img. Magisk will patch it, and then flash the patched boot image using adb (you need to have an unlocked bootloader). That's it!
meghgoswami said:
Yeah, sure -->
You need to have the unsigned boot.img for the q452, download it from here https://drive.google.com/file/d/127pySEIXj-uRyZpWycfRjaihkYgGv9tR/view?usp=sharing
Install the Magisk Manager apk, open it, click on the Install button next to "Magisk is not installed" and then click on Install again.
Then select "Select and Patch a File" and select the unsigned boot.img. Magisk will patch it, and then flash the patched boot image using adb (you need to have an unlocked bootloader). That's it!
Click to expand...
Click to collapse
Thanks bro!
Can you please tell me the adb commands?
ghoul99 said:
Thanks bro!
Can you please tell me the adb commands?
Click to expand...
Click to collapse
THIS WILL WIPE ALL THE DATA ON YOUR DEVICE, MAKE SURE YOU HAVE A BACKUP OF YOUR DATA
Ok, first you have to enable "OEM unlocking" in the Developer options. The adb commands are-
1. adb devices (to make sure that the device is connected)
2. adb reboot bootloader
3. fastboot devices
4. fastboot flashing unlock OR fastboot oem unlock Then press the volume up button on the phone to unlock the bootloader
5. fastboot reboot bootloader
5. fastboot flash boot boot.img (where boot.img is the unsigned boot.img, you have to put it in the adb folder)
6. fastboot reboot
That's it! Hit the thanks button if I helped you!
meghgoswami said:
I rooted my q452 using the boot.img-patch method for magisk
Click to expand...
Click to collapse
ok