hello all the boys, before throwing it away, I ask you kindly what else to do.
I unblocked the bootloader, I put the rom Griffin v3, and seriously and configuring the phone, I started to use it, and at restart I went into twrp recovery that at system startup I was asking for a pin I had set in id of the footprint, but I wonder what it is about ????? Well, I used the phone until the next day with no problem, after which it turned off and restarts always and only on the fastboot screen, I tried to flash with RDS lite an original stock rom but when trying to split up I failed, I tried the manual flash when I turned on it gives me the voice. AP FASTBOOT FLASH MODE SECURE in red, bootloader does not flash me, it's partitioning me, doing kids ..... the baseband voice is nothing, tell me.
I managed to flash the rom with mfastboot, the loop result does not start anything, I tried to flash the twrp Griffin, and I mistake mount date invalidity argument, give me a tip, what can i do.
devoice said:
hello all the boys, before throwing it away, I ask you kindly what else to do.
I unblocked the bootloader, I put the rom Griffin v3, and seriously and configuring the phone, I started to use it, and at restart I went into twrp recovery that at system startup I was asking for a pin I had set in id of the footprint, but I wonder what it is about ????? Well, I used the phone until the next day with no problem, after which it turned off and restarts always and only on the fastboot screen, I tried to flash with RDS lite an original stock rom but when trying to split up I failed, I tried the manual flash when I turned on it gives me the voice. AP FASTBOOT FLASH MODE SECURE in red, bootloader does not flash me, it's partitioning me, doing kids ..... the baseband voice is nothing, tell me.
I managed to flash the rom with mfastboot, the loop result does not start anything, I tried to flash the twrp Griffin, and I mistake mount date invalidity argument, give me a tip, what can i do.
Click to expand...
Click to collapse
Thank ,very very thank.....
devoice said:
hello all the boys, before throwing it away, I ask you kindly what else to do.
I unblocked the bootloader, I put the rom Griffin v3, and seriously and configuring the phone, I started to use it, and at restart I went into twrp recovery that at system startup I was asking for a pin I had set in id of the footprint, but I wonder what it is about ????? Well, I used the phone until the next day with no problem, after which it turned off and restarts always and only on the fastboot screen, I tried to flash with RDS lite an original stock rom but when trying to split up I failed, I tried the manual flash when I turned on it gives me the voice. AP FASTBOOT FLASH MODE SECURE in red, bootloader does not flash me, it's partitioning me, doing kids ..... the baseband voice is nothing, tell me.
I managed to flash the rom with mfastboot, the loop result does not start anything, I tried to flash the twrp Griffin, and I mistake mount date invalidity argument, give me a tip, what can i do.
Click to expand...
Click to collapse
Try this command: fastboot oem fb_mode_clear
That's all.
Related
I just tried unlocking the BL from my official AT&T gingerbread using this guide, I tried flashing the sbf file with RSD and it got stuck and now my phone stays at this with the difference that mine gives me the option to try fastboot, RSD mode, Android Recover and another pletora of options I'm not sure i want to name.
So being able to try RSD again, i tried flashing this and it was appearently working but when it tried to set the device on BP Pass through mode, the device would go back to the Infamous screen and it wouldn't move from there.
Am I screwed? Do i have option?
I'm going to try to flash the stock FW to see what happens
Kenchinito said:
I just tried unlocking the BL from my official AT&T gingerbread using this guide, I tried flashing the sbf file with RSD and it got stuck and now my phone stays at this with the difference that mine gives me the option to try fastboot, RSD mode, Android Recover and another pletora of options I'm not sure i want to name.
So being able to try RSD again, i tried flashing this and it was appearently working but when it tried to set the device on BP Pass through mode, the device would go back to the Infamous screen and it wouldn't move from there.
Am I screwed? Do i have option?
I'm going to try to flash the stock FW to see what happens
Click to expand...
Click to collapse
use the automatic unlock tool found here:http://forum.xda-developers.com/showthread.php?t=1182871&highlight=automatic
do option 1 then option 3 (only use option 3 if on gingerbread) and you're good to go
Fastboot then use fastboot oem unlock command on PC. Reboot and it should work.
Sent from my MB860 using XDA Premium App
Thanks, I'll try it out and post back
I forgot to mention that my phone seems to be low on battery. Does it charge if it's not on the OS?
Noob Killed his phone
Hello, First time Poster here, please bare with me...
I really shouldn't of touched this.....
I have an Atrix w/ the newest updates to it, and attempted to unlock the phone. Everything started well, then it failed while writing to the device. Now, when I attempt to boot, I get the similar message of
SVF:405;1:2
Failed to boot 0x1000
With a 14 available options. I can get into fastboot, though I honestly am not sure what to do from there. I have the fastboot s/w downloaded, along with the gingerbread OS.
Did I just kill my phone?
I haven't still fixed mine because of the battery, I still have to find an external charger. Though, you can try the link from above.
Ok, I did the steps and now my phone is at a screen with the motorola logo with the dual core name on it and it has the word Unlocked on top of it.
What should i do?
the boot screen with motorola logo and unlock in corner will take awhile to load usually like 10 minutes but if it doesnt load for example i let mine sit for an hour and never loaded i just took the batter o and restart it and it rebooted and worked but use that as a last resort give it some time!
Omg i just fixed it!! Thx for the help!!
Mrniceguy0921 said:
the boot screen with motorola logo and unlock in corner will take awhile to load usually like 10 minutes but if it doesnt load for example i let mine sit for an hour and never loaded i just took the batter o and restart it and it rebooted and worked but use that as a last resort give it some time!
Click to expand...
Click to collapse
i think if the phone can be detected by PC, it should be a soft brick.. it is unfortunate my phone is booting loop and can not be read by PC, you're better than me..
Hi all, so i´ts my first time here posting but I´ve been following this forums long ago and touching stuff with my phones.
Today (well today... i´m working on this since yesterday) I´ll need the help of the most veteran users since I can´t solve this on my own.
I Have an XT910 Razr Moto. Yesterday I charged it with it being off, but to my surprise when I powered it on, I got the Fastboot screen saying the device is locked. Here´s the complete error:
-----------
AP Fastboot Flash Mode (S)
0A.74
eMMC Info: Size 16G
To return to normal mode - first press power key to power down
Device is LOCKED. Status Code: 0
Battery Ok
Ok to Program
Connect USB Data cable.
-----------
So, after getting this, obviously I thought, well, power off, or force power off, then power it on, and lets go... Well, nothing, I constantly get into Fastboot again.
What I figured out is that if I power it off, then hold vol down + vol up and power at the same time, I actually CAN get into boot menu but It will not let me select anything, it will just show it and boot in Safe Mode for me.... Tried factory reset also, so i could backup everything...
After going through all that I decided to give it a try and go for RSD with stock firmwares from sbf.droid-developers.org. I got like 4 and they all stucked at cdt.bin flashing part... Giving me an error about 6/18 process that can´t flash cdt.
So far I´ve tried LOTS LOTS of stuff like some .zip going around there to fix the CDT, with no luck...
THen I ran into this post
http://forum.xda-developers.com/showthread.php?t=1651596
Which was very usefull to have some progress, like completing the flash by erasing some lines in the xml about the cdt. system (cause it hung a lot there and gave error again)...
However, the error still persists, I boot up my damn phone and it goes into AP Fastboot. When i go into Safe Mode I see that everything has been wiped so its like a factory phone now, but still in safe and powering it off won´t make the difference.
I´m kinda desperate and about to throw this phone out of the window. Is there any pro savior out there who can give me more tips?
Thanks!!!!!!!!!
-Musashi- said:
Hi all, so i´ts my first time here posting but I´ve been following this forums long ago and touching stuff with my phones.
Today (well today... i´m working on this since yesterday) I´ll need the help of the most veteran users since I can´t solve this on my own.
I Have an XT910 Razr Moto. Yesterday I charged it with it being off, but to my surprise when I powered it on, I got the Fastboot screen saying the device is locked. Here´s the complete error:
-----------
AP Fastboot Flash Mode (S)
0A.74
eMMC Info: Size 16G
To return to normal mode - first press power key to power down
Device is LOCKED. Status Code: 0
Battery Ok
Ok to Program
Connect USB Data cable.
-----------
So, after getting this, obviously I thought, well, power off, or force power off, then power it on, and lets go... Well, nothing, I constantly get into Fastboot again.
What I figured out is that if I power it off, then hold vol down + vol up and power at the same time, I actually CAN get into boot menu but It will not let me select anything, it will just show it and boot in Safe Mode for me.... Tried factory reset also, so i could backup everything...
After going through all that I decided to give it a try and go for RSD with stock firmwares from sbf.droid-developers.org. I got like 4 and they all stucked at cdt.bin flashing part... Giving me an error about 6/18 process that can´t flash cdt.
So far I´ve tried LOTS LOTS of stuff like some .zip going around there to fix the CDT, with no luck...
THen I ran into this post
http://forum.xda-developers.com/showthread.php?t=1651596
Which was very usefull to have some progress, like completing the flash by erasing some lines in the xml about the cdt. system (cause it hung a lot there and gave error again)...
However, the error still persists, I boot up my damn phone and it goes into AP Fastboot. When i go into Safe Mode I see that everything has been wiped so its like a factory phone now, but still in safe and powering it off won´t make the difference.
I´m kinda desperate and about to throw this phone out of the window. Is there any pro savior out there who can give me more tips?
Thanks!!!!!!!!!
Click to expand...
Click to collapse
What fastboot files did you tried to flash?Were you on ICS or JB before the brick?Where are you from?
Error 6 means that you are trying to flash wrong firmware,for example,you was on JB and now you want to flash ICS.
Here are JB Fastboot files http://forum.xda-developers.com/showthread.php?t=2231289,just flash one for your region.
welder73 said:
What fastboot files did you tried to flash?Were you on ICS or JB before the brick?Where are you from?
Error 6 means that you are trying to flash wrong firmware,for example,you was on JB and now you want to flash ICS.
Here are JB Fastboot files http://forum.xda-developers.com/showthread.php?t=2231289,just flash one for your region.
Click to expand...
Click to collapse
I´m from Argentina. And you are totally correct, I downloaded FB files for 4.0.4 , but now I tried running the phone in Safe Mode, went to sys info to take a look at it. And found I have 4.1.2
So question is, from that list you gave me, the "Retail Brazil" should do it? as well as UK retail or any other?? Which one should I chose
Thanks!!!!!!!! a lot
welder73 said:
What fastboot files did you tried to flash?Were you on ICS or JB before the brick?Where are you from?
Error 6 means that you are trying to flash wrong firmware,for example,you was on JB and now you want to flash ICS.
Here are JB Fastboot files http://forum.xda-developers.com/showthread.php?t=2231289,just flash one for your region.
Click to expand...
Click to collapse
Ok so I have made quite a progress here. I was able to get a Brazilian version which is from LATAM and RSD flashed straight like a charm. Now I have the clean new firmware.
And even I can read in the fastboot 0A.77 instead of 0A.74 version
HOWEVER: problem with the Fastboot still persists. Even the phone itself when it restarts goes into Fastboot and when I´m able to make a boot menu I can´t choose anything and it goes directly to Safe Mode.
Now that the system´s """""fixed"""" and I could flash it.... Any tips on taking this off? I cant start the phone in normal mode :S
Hi guys, I really need your help.
I'm new at this rooting stuffs and I tried to root my Oppo Neo 5.
I tried so many softwares like OneClickRoot, FramaRoot, and Kingroot but none seemed to work.
So I resorted to an app called oppo tools
It worked at first but I got really annoyed when my status bar suddenly colored to red when my phone discharges to 15% so I unrooted my phone and rooted back again. I really thought that was going to fix my problem but that's where the bootloop issue started.
I tried to flash some custom recovery zip but it failed since I only have a stock recovery.
But the thing is, I found a guide that says to rename the clockworkrecovery img to PG86IMG.zip.
So I did tried that and as soon as I flashed the zip from my stock recovery, my phone hanged.
I long-pressed the power button to restart and boot into recovery mode but nothing seems to happen.
I'll try to explain a bit more on how it looks when I boot my device.
When it boots normally (I mean not pressing the volume to enter recovery mode) it will only show the logo but when I try to go into recovery mode it will show the logo with a little text on the lower left portion "Recovery Mode"
Before I flashed the PG86IMG.zip, recovery mode was still working and the charging screen when off is working too.
but after I flashed the zip, every time I try to recovery mode the logo shows up with the little text but RECOVERY MODE isn't working. When I charge my phone it automatically boots up and shows the logo and text like it's trying to go recovery mode (I'm just trying to charge? It's going to recovery mode)
I tried using "adb devices" on cmd but it's not detecting any devices.
I'm really out of ideas guys, I know not all people use this model but what would be your suggestion?
A suggestion on how to fix this would really be appreciated :good:
I'm sorry I'm really new at this, please correct me if I did something wrong starting this thread. :angel:
@DeepBricked please confirm your problem, Boot-loop and can enter into recovery.
Salman Al-Badgail said:
@DeepBricked please confirm your problem, Boot-loop and can enter into recovery.
Click to expand...
Click to collapse
Oh, I'm sorry, I didn't notice.
Lately I can't access the recovery mode but now
I'm currently on Boot-loop and I can enter into recovery.
The ColorOS recovery mode only have limited function that I can mess around.
It only has the apply update, wipe data and cache, reboot, power off and system file verification.
As always I already did wipe the data and cache but nothing happens. Still boot-loop.
What should I do?
DeepBricked said:
Oh, I'm sorry, I didn't notice.
Lately I can't access the recovery mode but now
I'm currently on Boot-loop and I can enter into recovery.
The ColorOS recovery mode only have limited function that I can mess around.
It only has the apply update, wipe data and cache, reboot, power off and system file verification.
As always I already did wipe the data and cache but nothing happens. Still boot-loop.
What should I do?
Click to expand...
Click to collapse
You made a soft brick, not to worry flash it with correct stock firmware, if the phone is in warranty than ask them to do flash, this will take approx 10-30min. If it isn't in warranty than you should try it own or else pay some amount and the rest they will do.
Salman.
how about bootloop, cant enter recovery, reboot continiously when turn on even going to recovery, only fastboot isnt rebooting automaticaly but pc days drivers not succesfuly installed, and when off it qont detect by pc because of rebooting auto,
where can i find a rom for my oppo neo 5
pls help me pls
anyone can help me? I've tried to root my cherry mobile flare s play, I've flash twrp on it but it always boot in recovery it doesn't boot in system partition so I tried wiping the cache and dalvik cache, still doesn't boot so I tried flashing another recovery/rom and it just get worst it's now stuck in boot loop I've already tried the abd reboot-bootloader and always fall in error: device not found., I hope someone notice my case. thanks
Hello, this happens when the system is actually corrupted
you may reflash stock then twrp then root again
or just get a custom recovery for your device
you must go in bootloader for stock rom or twrp for custom rom, and that's fine your phone just needs a rom and its good to go
good luck
TheShadowMC said:
Hello, this happens when the system is actually corrupted
you may reflash stock then twrp then root again
or just get a custom recovery for your device
you must go in bootloader for stock rom or twrp for custom rom, and that's fine your phone just needs a rom and its good to go
good luck
Click to expand...
Click to collapse
but how can I boot it on bootloader? key combinations like vol+ and power or any combo doesn't work, only if someone can teach me how to boot it on bootloader or fastboot then there would be no problem for me, I don't know what to do now
Hello again, take out the bettery then put it back and use the bootloader combo
if it didnt work take out the bettery and flash through sp flash tool
nothing to worry about, i didnt notice that your phone can be flashed through sp flash, since it just requires the phone to be off
not really such a scary situation
TheShadowMC said:
Hello again, take out the bettery then put it back and use the bootloader combo
if it didnt work take out the bettery and flash through sp flash tool
nothing to worry about, i didnt notice that your phone can be flashed through sp flash, since it just requires the phone to be off
not really such a scary situation
Click to expand...
Click to collapse
will it work even if my device don't have battery on it?
kiltot24 said:
will it work even if my device don't have battery on it?
Click to expand...
Click to collapse
sp flash for my knowledge would work even when the battery is out it doesnt matter, just load the scatter press download button and connect the phone with battery off
good luck again:highfive:
-Hope- said:
sp flash for my knowledge would work even when the battery is out it doesnt matter, just load the scatter press download button and connect the phone with battery off
good luck again:highfive:
Click to expand...
Click to collapse
in my case I can't flash even a recovery image using sp flash tool. any help? sorry if I look like an ignorant any way thanks for your help guys, I really appreciate
no no problem, however what's the problem ?
I'm trying to flash a custom recovery on it but it doesn't work, I'm trying to flash twrp, the one I've flash before, because I don't have the stock rom of my device so I'm doing the process partially. I'm aiming to flash twrp and then restore my saved back up.
Hello,
i think your device stock frimware is there on google, however when you try to flash what error does it give or what happens ?
It doesn't show any error message and not showing any progress at all. my device just blink showing that the battery is charging though the battery is not present.
if it didnt detect it try pressing the volume up or volume down to make sure while connected ( and download button is pressed
just blink until it reaches time out.
I'm sure that my cable is working, it works on other device. I already install all the drivers I need.
is there a way to stop my device from simultaneous booting? it appears to be detected on device manager but just for a few sec, then reboot and appear again.
ensure the ROM is loaded properly in the flash tool.
Switch off the phone and remove battery.
press the start button in the flash tool to initiate the ROM flashing process. The process will be in hold, waiting for the phone to accept the new firmware.
Now connect the phone to computer.
Try these. Press and hold VOLUME DOWN OR VOLUME UP OR POWER+VOLUME UP OR POWER+VOLUME DOWN. One of these should work and the flashing process should start.
can I obtain the stock rom from the same device? I have the same model and it works properly. I can't download the stock rom from mediafire it always fail due to poor internet connection so I'm looking for another way.
I tried updating my driver then my device was recognized but when I flash the recovery image it displays 100% but in red color.
kiltot24 said:
I tried updating my driver then my device was recognized but when I flash the recovery image it displays 100% but in red color.
Click to expand...
Click to collapse
are you using the latest sp flash tool ?
yes thanks my device works fine now thank you for your help, the only problem now is how will I restore my device imei, it can be changed in engineer mode using at+ command but it be deleted again once conduct a factory reset in short it just set a temporary imei for my device, is there a way to change my device imei permanently?
I replaced the broken screen on my Kenzo and now it's stuck at the Mi logo. Funny thing is the technician said when he disconnects the touch ribbon it boots normally (but obviously with no touch) and locks up with Mi logo when it's connected. I've read that the mtk and sd screens are interchangeable so I don't think that's the issue. I don't have access to another screen so I have to make do with this one anyway.
I bought the phone from Gearbest two years ago and it came with the vendor rom which I never changed. I'm suspecting the vendor rom has something to do with it and now is the perfect time to flash a new rom before I sell it. Only problem is I have no clue how to flash a rom. I can get it to the fastboot screen but that's it.
Could someone please help me but in plain laymans English? Flashing for Dummies kind of thing. I've been a member here a while but haven't grasped the lingo or their meanings yet.
Thanks in advance.
Hooow?! said:
Google miflash
And download it.
Also download the latest miui developer rom
http://bigota.d.miui.com/8.1.25/miui_HMNote3ProGlobal_8.1.25_16348801ef_6.0.zip
Search for EDL.zip from xda itself and follow the instructions to get to edl mode from fastboot mode( to see if it's in edl mode check for the red blinking status LED when connected to the pc)
Now open miflash as administrator connect your phone to the PC.
Miflash should see it as something like COM..
Now extract the developer rom and in miflash browse for the extracted direvtory
At the bottom right select clean_all lock.bat and then press flash..
After few minutes the flashing should get completed and then hold the power button on the phone until u see the mi logo.
Wait for the booting to get completed and then setup the phone..
Congratulations you bow have a working phone again.
Click to expand...
Click to collapse
Thanks for the help. Well I got it all the way to flash in edl and around 9% it gave an error message "Object reference not set to an instance of an object" or something similar. So it basically failed. What can I do? I'm almost there
Hooow?! said:
Google some fastboot commands to erase partitions...
It should be something like this
fastboot erase boot
fastboot erase cache
> fastboot erase recovery
> fastboot erase system
> fastboot erase userdata
First go to fastboot mode by holding vol down and power together .
Then connect to PC and then install minimal adb and fastboot kit. Then open the shortcut in desktop and then type fastboot devices and check if u device is there or not. If yes then copy and paste the commands above and then repeat the EDL flash procedure.
Click to expand...
Click to collapse
This is depressing. I followed your instructions and used the command "fastboot format partition" as that's the only one that would work and was suggested in options. The result was "failed device locked". :crying::crying::crying:
Yep. Same result. Does the bootloader have anything to do with all this?
Any ideas why it would boot normally with the touch ribbon disconnected but bootloop when connected? I'm beginning to wonder if flashing will even work.
WELL!! My phone is suddenly working. After trying all sorts of flashing methods I put it on the charger this morning and just took it off and it's working perfectly.
What happened was I read another thread about flashing the Global rom with a locked bootloader. At the very end of the instructions and almost as an after thought, the author mentioned that you must boot the phone into recovery in order to clear the cache etc otherwise the phone will be stuck on the Mi logo. It sounded similar to my problem so I did volume up and power key together and the Mi logo came up. Thinking nothing had changed I did volume down and power and went into fastboot. Again nothing changed. So I switched it off, put it on the charger and left it for about 4 hours. I just took it off the charger 20 minutes ago and it was working perfectly.
Perhaps someone can explain what the heck happened? Meanwhile I'm selling it pronto. Lol
Twotems said:
WELL!! My phone is suddenly working. After trying all sorts of flashing methods I put it on the charger this morning and just took it off and it's working perfectly.
What happened was I read another thread about flashing the Global rom with a locked bootloader. At the very end of the instructions and almost as an after thought, the author mentioned that you must boot the phone into recovery in order to clear the cache etc otherwise the phone will be stuck on the Mi logo. It sounded similar to my problem so I did volume up and power key together and the Mi logo came up. Thinking nothing had changed I did volume down and power and went into fastboot. Again nothing changed. So I switched it off, put it on the charger and left it for about 4 hours. I just took it off the charger 20 minutes ago and it was working perfectly.
Perhaps someone can explain what the heck happened? Meanwhile I'm selling it pronto. Lol
Click to expand...
Click to collapse
Just dont sell it yet use some awesome oreo roms best is u try resurrection remix oreo its the best with agni kernel and enjoy..... Dont sell the kenzo man just enjoy the roms u can unlock bootloader unofficially which is far better and easier than official one and then flash twrp enjoy the phone
Androbots said:
Just dont sell it yet use some awesome oreo roms best is u try resurrection remix oreo its the best with agni kernel and enjoy..... Dont sell the kenzo man just enjoy the roms u can unlock bootloader unofficially which is far better and easier than official one and then flash twrp enjoy the phone
Click to expand...
Click to collapse
Lol. Nah, I already have a Mi Mix 2 which I'm loving. This old faithful has to go.