Hi, I just wanted to share the files and guide how to install updates / systems on LeEco Le S3.
I have an x626 model and everything works great, according to the information I found it should also work on the x622 model.
Files for MediaTek phones (Helio X20 in this case)
Installation:
update.zip
Download files
Put on your phone (root directory)
Power off the phone
Power & Vol+
Follow onscreen instructions
Be Happy
Fastboot
[Windows 10]
Install Drivers & ADB
Unpack files to folder "Flash" on desktop
Rename run.bat to systemflash.bat
Power & Vol- (Wait for fastboot mode)
Connect phone to PC
2-Click on systemflash.bat
Wait for the end of flashing process (10-20min)
Reboot your phone
Be Happy
Orange State remove
[Windows 10]
Power off the phone
Power & Vol-
Go to unpacked "platform-tools" folder
Shift + RMB & Open PowerShell console
Type "fastboot oem lock"
Wait
Type "fastboot reboot"
Be Happy
(Before next flashing u need to unlock flow using "fastboot oem unlock")
Downloads:
ADB & Drivers: https://forum.xda-developers.com/showthread.php?t=2588979
Platform-Tools (orange state): https://developer.android.com/studio/releases/platform-tools.html
[ TESTED, WORKING ] MultiLang Official Rom & ADB Files: https://www.needrom.com/download/leeco-letv-le-s3-x626-multilanguage-eu-fastboot-stock-rom/
Version 5.8.018S should unbrick your phone Google Play included
[ TESTED, WORKING ] EN/CN Official Rom (update.zip, only official recovery): https://www.needrom.com/download/leeco-s3-x626-official-stock-rom/
https://bbs.le.com//zt/eui/le_s3.html (Official link)
[ NOT TESTED ] EN/CN Official Rom & ADB Files: https://www.needrom.com/download/leeco-s3-x626/
[ NOT TESTED ] TWRP: https://www.needrom.com/download/twrp-leeco-3/
Can please give more information about the update ? Did he will fixe the problem ?
tiziano-petrov said:
Can please give more information about the update ? Did he will fixe the problem ?
Click to expand...
Click to collapse
What do u mean? List bugs or something
I'm now using 023S update and i didn't notice any bugs
AniMaya said:
What do u mean? List bugs or something
I'm now using 023S update and i didn't notice any bugs
Click to expand...
Click to collapse
on my behalf, i'm using 018S so i did't get any update ...... and i wounder if update will fix the know issues ?
and thanks for the reply
tiziano-petrov said:
on my behalf, i'm using 018S so i did't get any update ...... and i wounder if update will fix the know issues ?
and thanks for the reply
Click to expand...
Click to collapse
I didn't noticed any bugs on 023S On 018S i could not set the fingerprint lockscreen & there was none of the OTA programs, now there is "System Update" app
Please do explain the FASTBOOT to me clearly?
Can you please help me how to update my x626 to 5.8 018s fastboot? I dont know whay is fastboot and how. Can you please specify it to me clearly or one by one step. This my fb can you please message me there? facebook.com/MissKayeCenteno
Thank you so much.
MissKayeCentenk said:
Can you please help me how to update my x626 to 5.8 018s fastboot? I dont know whay is fastboot and how. Can you please specify it to me clearly or one by one step. This my fb can you please message me there? facebook.com/MissKayeCenteno
Thank you so much.
Click to expand...
Click to collapse
Let's cut off all the long stories and save us some stress. The process of updating is very simple. I just tried it and it worked perfectly. In fact, my x626 is still working very fine with some new features, like system update, introduced. Download the file, copy into your phone directory. Rename to update.zip(if you wish). Then click on the said file from the archives folder on your phone. It will give you two options in the unfolding dialogue; "extract" or "upgrade". Choose "upgrade" and you are pretty good to go...
Hi which file did you use? Im looking for software without the chinease software and Google apps
.
Orcaflugzeug79 said:
Is there a way to update to eui 5.9.xx with TWRP as recovery? Using a le s3 x626 with TWRP recovery. Did it just as you explained another member but nothing changed. Can I just install the downloaded zip file via "install" function in TWRP?
Help is appreciated
Click to expand...
Click to collapse
Yup, u can find ROM in LeEco Le 2 ROMs section Sorry for that, but now i can't add everything here. Later i'll add custom roms and working twrp script installer
Qazstar said:
Hi which file did you use? Im looking for software without the chinease software and Google apps
Click to expand...
Click to collapse
Today i'll add clean and custom roms + TWRP script
sorry... how to upload a cellphone from linux? :'(
someone has a link for the stock recovery sorry if it's already answered, but I didn't find.
Hello! Need official Android 8.1 for X626
hi, I can not install TWRP 3.1.1 on leeco x626
some advice or video idea on the internet
I also want to try TOOL ALL IN ONE, but I'm not sure
I recognize the device and adb but I want to make sure
Thank you
How do I put the files in the root directory if the phone is bricked? I don't know how to do that.
Is it true that LeEco recently launched LeX? Does it mean LeEco is now up and running? Let them help with the latest firmware for x626 or provide the source code needed by developers to do same. The phone OS has been stagnant for too long...
How this post will help me UnBricking x626 ? Help
LeEco x626 Wifi not detecting networks
My LeEco x626 the Wifi does not detect networks. Any idea qhere I can look for the problem and a solution?
Hello everyone.
I am new to this forum so please don't scold me . My brother had problems with his LeEco S3 x626, the phone disconnected from the mobile network and then froze and restarted.
I figured maybe that would be solved by flashing a new rom. While I attempted to unlock the fastboot/bootloader, the phone bricked and is now unusable.
I tried following this thread https://forum.xda-developers.com/le-...power-t3715937 and nothing worked. SPF displays CMD DA FAIL error.
Please help!!!
Related
Hi
My phone Infocus m370i is soft bricked. If you have the stock rom of this (or this phone), then kindly please update the rom on the forum. I've searched everywhere on the net for it and I haven't found it anywhere as of yet.
Thanks,
handsome_94 said:
Hi
My phone Infocus m370i is soft bricked. If you have the stock rom of this (or this phone), then kindly please update the rom on the forum. I've searched everywhere on the net for it and I haven't found it anywhere as of yet.
Thanks,
Click to expand...
Click to collapse
Got it!!
All roms of INFOCUS are given on their Taiwan website. Unfortunately, the site is in local language but with little exploration I was able to find out the rom in it. I'm pasting a link to it:
Code:
dl.infocusphone.com/update/M370_00WW(INF)/FAO-1120-0-00WW-A01-update.zip
This worked absolutely fine on my phone with stock recovery.
Procedure Required
Please help me to follow the procedure for doing this ....my phone isn"t working for 1 month service centers also nothing to do
saikrishna veerla said:
Please help me to follow the procedure for doing this ....my phone isn"t working for 1 month service centers also nothing to do
Click to expand...
Click to collapse
Ok, here is the procedure.
1) Download firmware for your phone (I'm supposing its m370i) and put it in a mini SD card.
2) Now insert this memory card into your phone, and boot into recovery mode.
3) Now select update zip from SD Card and select the firmware file in your SD Card.
4) Once the operation has started wait for 15-20 mins. for the entire process to end. Do not restart the phone till the procedure ends on its own.
That's it!!
Infocus M370i
Hello ,
At the moment I have this Phone in my hand ..
Its getting error on Unfortunately ,System UI has stopped !!
I already download Rom ..
But Phone can't go to Recovery Mode ..
Plz shear if have any way to put Recovery Mode !!
Thanks
Wbr'
AniAXN
AniAXN said:
Hello ,
At the moment I have this Phone in my hand ..
Its getting error on Unfortunately ,System UI has stopped !!
I already download Rom ..
But Phone can't go to Recovery Mode ..
Plz shear if have any way to put Recovery Mode !!
Thanks
Wbr'
AniAXN
Click to expand...
Click to collapse
1) Make sure you have adb and fastboot
2) Enable USB debugging in your phone (In developer options)
3) Change your USB computer connection -> Camera (PTP)
4) Execute command "adb devices" Now it should show your device's serial on the screen.
5) After (4) execute the command "adb reboot recovery". That's it.
Error to Install
handsome_94 said:
1) Make sure you have adb and fastboot
2) Enable USB debugging in your phone (In developer options)
3) Change your USB computer connection -> Camera (PTP)
4) Execute command "adb devices" Now it should show your device's serial on the screen.
5) After (4) execute the command "adb reboot recovery". That's it.
Click to expand...
Click to collapse
Hello ..
I Trying Install in Recovery Mode with SD Card
But Get This Error ..
Here I Use Your File which you Post ..
I Don't know why i can't post screen shot ..???
Wbr'
AniAXN
handsome_94 said:
Got it!!
All roms of INFOCUS are given on their Taiwan website. Unfortunately, the site is in local language but with little exploration I was able to find out the rom in it. I'm pasting a link to it:
Code:
dl.infocusphone.com/update/M370_00WW(INF)/FAO-1120-0-00WW-A01-update.zip
This worked absolutely fine on my phone with stock recovery.
Click to expand...
Click to collapse
This firmware is meant for M370. Will it function properly on M370i?
I compared the hardware properties and I don't seem to identify any relevant differences, so, I just want to confirm here.
von COLLINZO said:
This firmware is meant for M370. Will it function properly on M370i?
I compared the hardware properties and I don't seem to identify any relevant differences, so, I just want to confirm here.
Click to expand...
Click to collapse
Yes, It has worked on my Infocus M370i twice (1 GB Ram/8 GB memory). I'm not so sure about 2 GB version as I don't have it but theoretically it should work on it too.
Hello ..
This Rom not work with my Phone ..!!
If any body have this file ..
Plz shear here ..
Its I need very badly ..
Wbr'
AniAXN
how to root infocus m370i please help
puipuia said:
how to root infocus m370i please help
Click to expand...
Click to collapse
Use kingroot app to root m370i. Search, download the app of this app from Google. Run it and in press of a button everything will get done.
try to install system update but I remove some system app will this brick my phone if I install it...please help
khopsa said:
try to install system update but I remove some system app will this brick my phone if I install it...please help
Click to expand...
Click to collapse
If you have ever rooted your phone which I believe you have, then installing software update will brick your phone.
To avoid this, you should first install stock rom and then update the system.
thanks for your reply....
is there any custom ROM for infocus m370i...
how to root infocus m 370i
---------- Post added at 08:10 AM ---------- Previous post was at 08:07 AM ----------
kingroot is not working both apk and pc version in infocus m 370i.can it works for u ? pls rply
handsome_94 said:
Hi
My phone Infocus m370i is soft bricked. If you have the stock rom of this (or this phone), then kindly please update the rom on the forum. I've searched everywhere on the net for it and I haven't found it anywhere as of yet.
Thanks,
Click to expand...
Click to collapse
bro how long does it take for verifying update package? Its took 25 mins since the procedure started!
plz help bro
Hi
I am having problem with the touch in my in focus m370i to my knowledge I didn't drop it ... After the latest software update this problem arose .... Any ideas ????
i had done the same procedure tht you told to update the rom from stock recovery but it bricked and showing only logo and restarts wht to do now ?
Unbrick Oppo R5
Since oppo forums support is minimal and a lot of Oppo R5/ R5s owners are facing difficulties flashing new rom and since Oppo is unbrickable here are a guide as posted to oppo forum members by the member Ricky.
I had clear instructions not to post this tool anywhere BUT THEY DON’T SUPPORT ANY DEVICE and I have to break my promise as they broke any kind of support.
This community (XDA) is to help all members
The tool works with windows 10 and not only with windows 7 as they mention in their instructions
Packages you have to download first
1- Firmware ColorOS https://www.partage-facile.com/LM6Y85FF7Z/r8106ex_11_a.16_150806.tar.bz2.html
File Name: R8106EX_11_A.16_150806.tar.bz2
Size: 1.4GB
MD5: F85ED63BA637B559976D9BFF0AED0187
2- Instructions:
https://drive.google.com/file/d/0B3AWkNVCRSNVZGNRUE1rQW5YOFk/view?sid=
3- Driver : http://en.oppo.com/downloads/firmware/driverForFind5.rar
Mirror for driver http://www109.zippyshare.com/v/MEMiPlOv/file.html
Attention
a-Unbrick tool will wipe all data on your device including photos and music etc, if do you want to reserve your data please make o back up on your PC
b- After unbrick the first time power up take around 5-15 minutes
c- The most important things are to install the driver. For windows 10 you must enable unsigned signature verification through windows advanced settings (google it) prior driver installation.
d- In order to shut phone completely hold the power button for 8 -10 secs
How to use the tool
I tried to use the tool and the files you provided to revive my Oppo R5, but the layout of the tool which you provided is different from the one in the picture (you gave in the links). It is also in foreign characters so difficult to choose with option to tick.
In fact, the version that came with you package does not have as many option as the one in the picture. My confusion actually starts from when the program starts. There is a drop down menu to chose from a long list of 14005 to 15065. Which one do I choose for Oppo R5?
As for the qualcomm port, the device manager identified my phone on port 9006, whereas the picture shows 9008.
Please help me. I really need to get this phone to work. The phone would not do any thing is the buttons are pressed individually or in combination, other than being detected by the computer and enumerated in the device manager.
Many thanks in advance for your help.
amadoro said:
I tried to use the tool and the files you provided to revive my Oppo R5, but the layout of the tool which you provided is different from the one in the picture (you gave in the links). It is also in foreign characters so difficult to choose with option to tick.
In fact, the version that came with you package does not have as many option as the one in the picture. My confusion actually starts from when the program starts. There is a drop down menu to chose from a long list of 14005 to 15065. Which one do I choose for Oppo R5?
As for the qualcomm port, the device manager identified my phone on port 9006, whereas the picture shows 9008.
Please help me. I really need to get this phone to work. The phone would not do any thing is the buttons are pressed individually or in combination, other than being detected by the computer and enumerated in the device manager.
Many thanks in advance for your help.
Click to expand...
Click to collapse
For R5 use 14016.
mermigas said:
For R5 use 14016.
Click to expand...
Click to collapse
Thank you for your reply. I tried to use the tool again, but there is not option for 14016. The full list is here: 14005, 14006, 14023, 14037, 14039, 14040, 14041, 14042, 14043, 14045, 14046, 14047, 14050, 14051, 14052, 14061, 14062, 14065, 14068, 140083, 14085, 14097, 14098, 15005, 15005_4G, 15006, 1500_4G, 15007, 15007_4G, 15011, 15012, 15013, 15018, 15057, 15061, 15065.
The flash tool that I am using is V1.5. Is is possible that I am using a wrong version for what I need to do?
Many thanks for your attention.
amadoro said:
Thank you for your reply. I tried to use the tool again, but there is not option for 14016. The full list is here: 14005, 14006, 14023, 14037, 14039, 14040, 14041, 14042, 14043, 14045, 14046, 14047, 14050, 14051, 14052, 14061, 14062, 14065, 14068, 140083, 14085, 14097, 14098, 15005, 15005_4G, 15006, 1500_4G, 15007, 15007_4G, 15011, 15012, 15013, 15018, 15057, 15061, 15065.
The flash tool that I am using is V1.5. Is is possible that I am using a wrong version for what I need to do?
Many thanks for your attention.
Click to expand...
Click to collapse
Sorry mistyped
14061
Also there is an English Version for the flashing tool here
https://forum.xda-developers.com/r7-plus/help/oppo-r7plusm-msm-tool-t3313759.
Just download it and copy to the folder that there is the Chinese tool
For me the Chinese version works fine
Also there is a same guide here
http://community.oppo.com/en/forum.php?mod=viewthread&tid=51497&extra=
mermigas said:
Sorry mistyped
14061
Also there is an English Version for the flashing tool here
https://forum.xda-developers.com/r7-plus/help/oppo-r7plusm-msm-tool-t3313759.
Just download it and copy to the folder that there is the Chinese tool
For me the Chinese version works fine
Also there is a same guide here
http://community.oppo.com/en/forum.php?mod=viewthread&tid=51497&extra=
Click to expand...
Click to collapse
Thank you so much. it worked. Not my Oppo r5 is back alive.
Where is the download?
Is it normal that when I hit the download link there appear aliexpress??
I thought I had bricked my R5 but while trying to follow this guide it wasn't showing up in the "Ports" section of the Device Manager. I found that my phone still had fastboot, so I used it to install latest TWRP and then the repair rom. And now my phone is finally back to working condition! I hadn't modified in any way my phone and one day it got stuck at the logo. Anyway, thanks for the guide Mermigas!
anyone mirror pls
mega
[email protected] said:
anyone mirror pls
Click to expand...
Click to collapse
[dead link]
If it asks for a key leave it blank
Kushracer said:
https://mega.nz/#F!q8YFEJyB
If it asks for a key leave it blank
Click to expand...
Click to collapse
No asking for decryption key
mirror
Uploading here: R5S Unbrick Tools
Please help
After i have done all those instructions: my phone was completely dead(no more display and can't use any buttons).
Please what should i do for revive that.
Link Broken
cpuld you re-load the link of Color Os firmware please?
Its not valid now =(
Number for R5S?
Hi, I tried the 14061 for my OPPO R5S. Unfortunately it did not work. Now the phone is not starting.. help? Should I use another number?
Hello everyone. I just want to ask if someone has already made some experiences with rooting the new Bluboo s1? Or has made it with a similar phone and can give some advices to try out. Thank You.
how to root?
ubuntuh said:
Hello everyone. I just want to ask if someone has already made some experiences with rooting the new Bluboo s1? Or has made it with a similar phone and can give some advices to try out. Thank You.
Click to expand...
Click to collapse
I'm in same problem , i already tried with sptool , trying by doogee mix that is the same chipset , but no luck...
https://forum.xda-developers.com/android/general/doogee-mix-development-support-t3632785
it seems that nobody wants root on this phone
btw, when u listnning music by bluetooth is Bluetooth music intermittently cuts out?
tnks
I haven't had this problem in special but still the bluboo s1 is a shame in my opinion. I think i will try to resell it asap. The button for waking the screen is been stuck nearly every time i use it.
bbfsonic said:
I'm in same problem , i already tried with sptool , trying by doogee mix that is the same chipset , but no luck...
https://forum.xda-developers.com/android/general/doogee-mix-development-support-t3632785
it seems that nobody wants root on this phone
btw, when u listnning music by bluetooth is Bluetooth music intermittently cuts out?
tnks
Click to expand...
Click to collapse
Mine works fine with fingerprints sensor (recorded 4 fingerprints in various positions and fingers) and bluetooth using Dacom Gf7. I'm very happy for this 150€ purchase. Maybe there are different hardware versions because someone reports also speaker low levels and mine is strong and clear during calls, too. I also hope to find a way to root this very nice, fast and stable device to enable more options. Keep us informed on your rooting progresses. :laugh:
ROOT DONE!! BLUBOO S1 MTK Nougat7.0 FIRST HOMEMADE ROOT!!
Super easy.
Only need a patched stock boot.img image
And unlock the phone before flash it.
Fastguide:
Requisites...
Fastboot/adb tools and drivers
Firmware V10 (lastest update)
Unlock Bootloader
Start!!
Connect bluboo S1 on fastboot mode.
With adb/fastboot tool.
Write:
fastboot oem unlock.
Take your phone and press vol+ (same as accept unlock process)
Now your bootloader its free and your phone will FORMAT.
(Only keeping the system base)
Now with your bootloader open... Wait for reboot android UI.
Download the lastest Magisk Manager.apk (search on ggle "V5.3.0" works on my own) and install IT.
Download this file on mega. And remove ESPACES from-the-link (MOST IMPORTANT)
mega. nz /#!xQtwnR7S!h1vylwQd3u_lUZ4Cbkw_S8YOsL2VskIDuVfbNTT kEis
(Img Patched with magisk v14/stock boot.img from Bluboo S1 Compilation V10, android 7.)
Now if u have the .img from MEGA.. Rename it "boot.img" and place it on the "adb/fastboot" Folder
Open adb/fastboot tools, write:
adb reboot fastboot
And simple...wait for fastboot and write:
fastboot flash boot boot.img
Blablabla, OKAY!
And reboot it:
Fastboot reboot
And keep sure all has been doned on magisk manager check it.
I can not download from mega.nz link requires key to decrypt, please release key or new link thank
Inviato dal mio Bluboo S1 utilizzando Tapatalk
I could download the link without issues, removing all spaces as the OP wrote. Will give it a shot.
this is the link, all works for me, thanks all, I could restore my apps with TB https://mega.nz/#!xQtwnR7S!h1vylwQd...ockboot.imgfromBlubooS1CompilationV10,android 7.)
Install Koush Universal adb driver and adb.
To unlock boot loader, use the method stated above.
For rooting, install Kingoroot on your pc and enable USB debugging on your phone.
Connect it to the pc by a usb cord and open kingoroot, it will detect your phone and you only have to click the root button and wait for a few minutes.
Ur internet connection should be active during the process.
bbfsonic said:
I'm in same problem , i already tried with sptool , trying by doogee mix that is the same chipset , but no luck...
https://forum.xda-developers.com/android/general/doogee-mix-development-support-t3632785
it seems that nobody wants root on this phone
btw, when u listnning music by bluetooth is Bluetooth music intermittently cuts out?
tnks
Click to expand...
Click to collapse
Yep same problem with bt headphones,tried two sets same result,so it seems yet another problem with this phone ( search other post on this forum you will see there is a growing list!
Code:
**** DISCLAIMER ****
This post is an EXPERT-LEVEL Post.
I am NOT RESPONSIBLE for what you do to your device.
Please not that I am still working on a solution to this brick.
Hello XDA-Developers,
I recently got my hands on a Meizu M3 note and, of course, wanted the newest - nougat - firmware on it. It seems I accidently flashed a incompatible (or currupted) Update (flashed an A Firmware on a G version phone). Sadly it broke down and showed only vertical stripes on it's display.
Image here: https://ibb.co/cpGunm
After some hours research I found some information on how to reflash the M3 note via SP Flash Tool here and here. Since the first tutorial is for the M3 and M3s and the second tutorial is for the M model of the device (I've got the L model) there are some changes needed for it to somehow magically work.
I exchanged files provided (such as preloader.bin, lk.bin etc) with the matching ones from the latest Official Global Firmware from Meizu. Just extracted them out of the update.zip. (Don't forget to select the Authentication File!)
Image here: https://ibb.co/k3zYDR
Short flashing tutorial: make sure your device is turned off and disconneced then click "Download" and connect your device via USB. Don't worry if it now shows an error like "Download DA Failed", just dismiss the error and click "Download" again. It should flash the device now.
Sadly it is not possible to flash the boot.img provided in the latest official update.zip from Meizu (you'll get an security mismatch error). BUT the boot-verified.img provided by the chinese archive is flashable and is accepted by the device. The device is now in a bootloop, fastboot is accessible via holding Vol - and Power, but no recovery access via Vol+ and Power
The files seem to be repaired now but the display still shows these stripes - I think the firmware actually fried something on the display chipset. I bought a replacement screen and then will update this thread as soon as possible. If you have any Ideas of how to unbrick the device feel free to discuss.
Update 18.11.2017
Thanks to @ncristian !
I did as he suggested, downloaded and flashed the files from the russian forum here (if you do not speak russian and want to get straight to the point: Direct Download Link)
I still have the stripes on my screen but the device booted up successfully and got recognized again by my computer! While booting up I could see the stripes changing their color slightly as the bootanimation of flyme was playing. I guess I will have to replace the screen to make the display error go away... I will update this post as soon as I did so
Update 10.11.2018
Sadly I never actually exchanged the screen, I'm running a Pro 7 Plus as a daily driver now and I'm loving it
Update 19.05.2019
I have attached the boot-verified.img as someone requested it
I had the same problem and I solved thanks to this: https://4pda.ru/forum/index.php?showtopic=739028&st=24480#entry65580668 and Google Translate; I downloaded the .zip, installed drivers, launched the flash tool and flashed files contained in the folder L691H (Remember to install drivers and disable antivirus or it will not work). Then I downloaded FlyMe 6.1.0.0G, went into recovery with vol up + power, copied the update.zip into the device "Recovery" and flashed it; the only problem I had is that the phone charged but he didn't recognize the battery level; by reflashing the files contained in the 4pda .zip, the battery level went up (obviously, after leaving the phone charging for about an hour).
Someone please help my meizu m3 note bricked after flashing flyme 7.8 beta.
Rajdas26 said:
Someone please help my meizu m3 note bricked after flashing flyme 7.8 beta.
Click to expand...
Click to collapse
Try reflashing via the original recovery, that might be your easiest solution. If that doesn't work you might try your luck with something like SP flash tool
Hey. Uhmm i know it's an olld post but i'm hopeless now. I need the boot-verified img you have. i can't find it anywhere. can you send it to my gmail ?? [email protected]
shawn_mendes said:
Hey. Uhmm i know it's an olld post but i'm hopeless now. I need the boot-verified img you have. i can't find it anywhere. can you send it to my gmail ?? [email protected]
Click to expand...
Click to collapse
I have attached the file to the first post. Good thing I never delete anything :angel:
m3shat said:
I have attached the file to the first post. Good thing I never delete anything :angel:
Click to expand...
Click to collapse
First of all, thank you mate I successfully downloaded the boot verified. But still it didn't turned on. Just no power but recognized by the sp tool. I'm starting to think that downloaded again the wrong firmware. I also found out that their are two main board(or whatever is that). So this global firmware can be flashed in the both L and M series. I'm wondering what firmware you used to flash. Again, thank you in advance ^_^
l got same problem .. (because I'm not read careful )l tired to flash using many firmware or using boot verified .. i tired that for 2 Days.. So l give up.. take my device to profesional service . and solved. solved with Emmc repair ..
my device is L681H.
SORRY WAS INACTIVE FOR SOMETIME... NOW IM BACK YOU CAN ASK AGAIN...
ALL CHIPSETS UNBRICKING METHOD HAS BEEN POSTED
Hi you may ask me anything related to android and I promise to answer within 24 hours and m reply will definitely work for you.
*****************************************************
SPECIALIST IN ROOTING, DEVELOPMENT, HACKING, SECURITY BYPASS, RECOVERY, FLASHING, CUSTOM ROM'S
*****************************************************
SEE YOU SOON
*****************************************************
•NOT RESPONSIBLE FOR ANY DAMAGE CAUSED TO YOUR DEVICE•
LG Aristo v10g Metropcs
How do i start configuring this phone without a google account?
A friend who was using it gave me this phone but forgot the boot password and the google account was not of him. So, now, we can´t use the phone.
Mephis96 said:
How do i start configuring this phone without a google account?
A friend who was using it gave me this phone but forgot the boot password and the google account was not of him. So, now, we can´t use the phone.
Click to expand...
Click to collapse
You mean to say that the phone is in frp mode?
(Factory reset protection)
Yes
FRP..... thanks, id did not know what it means.
Yes, it is in FRP
Mephis96 said:
FRP..... thanks, id did not know what it means.
Yes, it is in FRP
Click to expand...
Click to collapse
Can you please tell me the phone model and it's info.
LG Aristo v10g from Metropcs
x.ak**** said:
Can you please tell me the phone model and it's info.
Click to expand...
Click to collapse
Ita LGMS210 v10g.
What's more do you want me to send? I dont know which information do you need?
[PC] HOW TO CURE A BRICKED M-TEK DEVICE!!
///////////////////////////////////////////////////////////////////////////////////////////
• Download and Install the Android USB drivers for your device that I have mentioned below.
• Power Off your device and remove the battery (only if it's removable)
• Download the stock ROM or the Custom ROM on your PC that you want to flash. (GIVEN BELOW)
• Download and extract SPFT (Smart Phone Flash Tool) on your PC, you will be able to see the files shown in the picture below. (Pic 1.1)
• Open Flash tool.exe (Pic 1.2)
• Once SPFT is launched tap on Download tab. (Pic 1.3)
• In download tab click on Scatter-Loading button. (Pic 1.4)
• Now locate the Scatter File that you will find in the Stock ROM folder that you downloaded in step 3. (Pic 1.5)
• Click on Download button to start the flashing process.(Pic 1.6)
• After finishing a success message will appear. (Pic 1.7)
///////////////////////////////////////////////////////////////////////////////////////////
Downloads:-
https://androiddatahost.com/b9cyw (DRIVERS)
https://spflashtool.com/download/SP_Flash_Tool_v5.1744_Win.zip (SPFT)
https://www.needrom.com/download/lenovo-s850/ (ROM FOR LENOVO S850, REGISTRATION NEEDED ON WEBSITE TO DOWNLOAD THE ROM)
///////////////////////////////////////////////////////////////////////////////////////////
Mephis96 said:
Ita LGMS210 v10g.
What's more do you want me to send? I dont know which information do you need?
Click to expand...
Click to collapse
I was working on another project that you can see below give me 1 hour I'll get back to you ASAP.
Best tool like SetCPU for controlling CPU with profiles?
SetCPU doesn't allow core control though
Mephis96 said:
Ita LGMS210 v10g.
What's more do you want me to send? I dont know which information do you need?
Click to expand...
Click to collapse
How to BYPASS FRP LOCK!
Test conducted on Virtual Machine on my PC
****************************************************************
I am not responsible for any damage you may cause to your device!
****************************************************************
****************************************************************
Never wanted to upload it but did it because I aim at helping people.
****************************************************************
Google FRP (factory reset protection) is aimed at making a stolen phone less valuable.
We usually keep our phones locked with a password or pattern but once its stolen it is easy to erase the data (via Hard Reset) and reuse the phone. With Google FRP in place, whenever the phone is formatted using hardware keys it will ask for the last synced google account details before proceeding further.
///////////////////////////////////////////////////////////////////////////////////////////
Until now, everytime some sort of hack comes out to bypass this screen and then its patched with a security update very soon. Same is the case with LG Aristo. There is a working solution as of now but it may not last long. Let’s see how to get this working –
///////////////////////////////////////////////////////////////////////////////////////////
How to Bypass LG Aristo Google Account –
This process is lengthy, but it’s a sure shot method and works every time.
We need 2 apps to complete this bypass process. They are Shortcut Master Lite and Sidebar Lite. Download the zip file from below link.
DOWNLOAD
>Extract the zip file and transfer the apk files to a micro sd card. Install the SD card in your LG Aristo before proceeding further.
///////////////////////////////////////////////////////////////////////////////////////////
Mephis96 said:
Ita LGMS210 v10g.
What's more do you want me to send? I dont know which information do you need?
Click to expand...
Click to collapse
Done
Drop a like on all my replies so I can stay encouraged and help you further.
YeshYyyK said:
Best tool like SetCPU for controlling CPU with profiles?
SetCPU doesn't allow core control though
Click to expand...
Click to collapse
You may use Kernel Manager it's super useful and will do what you're asking for!
Hi ! Could you help me with my problem ?? https://forum.xda-developers.com/search.php?searchid=446201503
No one seems to be able to help me... thanks a lot!!!!
antoflos said:
Hi ! Could you help me with my problem ?? https://forum.xda-developers.com/search.php?searchid=446201503
No one seems to be able to help me... thanks a lot!!!!
Click to expand...
Click to collapse
I will definitely help you just give me one hour but can you post the following info:
Model Number:
Exact Problem:
How that problem occured:
Model Number: SM-G935F / Galaxy S7 edge
Exact Problem : I can't go back to the dock ROM
How that problem occured : Last week, I wanted to try to change my phone a SM-G935F on a custom rom " Minotaurus Oreo V10". I did it successfuly but didn't like it so much so I decided to go back to stock Rom.
I used Odin and a stock ROM for that but I think I made a big mistake by not wiping with TWRP before flashing with Odin.
It resulted that my phone was stocked on the S7 edge logo. Luckly I can go on download mode so it's not hard bricked but Odin failed on every flash I've tried. It stoped at the step "config.msi"
To flash I used this dock Rom : SM-G935F_1_20161201150115_pbdym44h2s_fac
x.ak**** said:
I will definitely help you just give me one hour but can you post the following info:
Model Number:
Exact Problem:
How that problem occured:
Click to expand...
Click to collapse
Hey man this quite difficult and i need to install this phone's firmware on my VIRTUAL Machine, basically I request you to wait for the time being so I can save your phone.
Drop a like on all my comments above to encourage me.
Huawei P10+ Firmware on Huawei P10 - by accident
Hi:
On my P10, I used Firmwarefinder for Huawei to find the firmware (Oreo with EMUI 8) and after verifying, I downloaded and upgraded the P10 to new firmware. After reboot, the dpi is seemed changed (as picture attached) and when I went to check it on about phone, it says Model is VKY (which is Huawei P10+) - picture attached.
Is there a way to rollback and install the correct firmware on this phone somehow?
antoflos said:
Model Number: SM-G935F / Galaxy S7 edge
Exact Problem : I can't go back to the dock ROM
How that problem occured : Last week, I wanted to try to change my phone a SM-G935F on a custom rom " Minotaurus Oreo V10". I did it successfuly but didn't like it so much so I decided to go back to stock Rom.
I used Odin and a stock ROM for that but I think I made a big mistake by not wiping with TWRP before flashing with Odin.
Click to expand...
Click to collapse
***********************************************************************************
I AM NOT RESPONSIBLE FOR ANY FURTHER DAMAGE THAT MAY BE CAUSED TO YOUR DEVICE...(UNLIKELY TO HAPPEN)
***********************************************************************************
For being able to make the downgrade operation you will have to use a Windows based computer on which you will then install Odin (an official program developed by Samsung and used on update types of operations).
***********************************************************************************
Download Odin on your computer; afterwards install the program by following on screen prompts.
The Samsung Galaxy S7 Edge USB drivers must be installed on your PC too – use Samsung KIES in that respect.
Download the stock / official Android OS for your S7 Edge – from SamMobile or from Samsung’s official website.
Power off your device and reboot into download mode: press and hold the Power, Volume Down and Home buttons for a few moments; then connect your phone with your computer with the help of the USB cable.
After making sure that Odin has recognized your device (the “added” message must be displayed and the ID:COM field should be turned yellow or blue) from the program select the PA option.
Load the firmware file; don’t select the Re Partition and Auto Reboot options; click on Start when done.
Wait while your SGS7 Edge is being updated; when done, remove the USB cord and reboot your phone.
For further info related to the update process reply to my thread
LIKE ALL MY COMMENTS TO ENCOURAGE ME TO HELP YOU.
xironimoh said:
Hi:
On my P10, I used Firmwarefinder for Huawei to find the firmware (Oreo with EMUI 8) and after verifying, I downloaded and upgraded the P10 to new firmware. After reboot, the dpi is seemed changed (as picture attached) and when I went to check it on about phone, it says Model is VKY (which is Huawei P10+) - picture attached.
Is there a way to rollback and install the correct firmware on this phone somehow?
Click to expand...
Click to collapse
No pictures attached!! and yes you can roll back to the stock ROM or even customize the DPI according to your phone [ROOT REQUIRED]
Let me know which one you prefer?
Also like all my comments above to encourage me to help you even faster.