After install rom ver 1.2.44 my watch stays forever at boot animation.
It is accessible via adb and i can reboot it into fastboot, but the boot not continue completely.
I tried to install other rom versions, even stock, but there isn't way to repair, all always stays at boot animation.
I need your help.
If somebody have any fix i can do, will be appreciated.
Maybe format the system via fastboot or something like this.
Any idea?
Thx.
jmpcarceles said:
After install rom ver 1.2.44 my watch stays forever at boot animation.
It is accessible via adb and i can reboot it into fastboot, but the boot not continue completely.
I tried to install other rom versions, even stock, but there isn't way to repair, all always stays at boot animation.
I need your help.
If somebody have any fix i can do, will be appreciated.
Maybe format the system via fastboot or something like this.
Any idea?
Thx.
Click to expand...
Click to collapse
SOLVED.
I used this installer as my last chance and then all went ok.
https://www.youtube.com/watch?v=z5M3OiAshz4
Thanks to @Alain.
Related
My tab is in a boot loop when i tried to put it back to stock rom, and i cannot get into any boot loader it never loads, i can get to the apx mode and nvflash.
This Tab had 1.1 to start, then somehow i ended up with 1.2 on it then i had a bad crash and i cant get into recovery. I press the power and sound button for recovery and get the litle message like its going into it but it wont. Ive tried to use nvflash to go back to stock rom but it is in a boot loop now.
How or where do i get something that will give me a way to get back into a functional clockwork mod or some sorta boot loader? I think i need "NVFlash rev5 by tlb1961" but the links to is are gone. Basically i need to know how to nvflash back to a functional boot loader. Or Fix this boot loop? From there i can install a new flashback 10.3 Can anyone help me? I need files and instructions.
Thanks
Try this procedure out.
You'll should get a 1.1 stock ROM. Then, let it update itself to the 1.2.
Ive tried it, i still get to the tap n tap screen and boot loop, meh ive even tried a format rom to try to clear everything so i can get a boot loader back on it to load something else besides stock. No luck!
Tarkster said:
Ive tried it, i still get to the tap n tap screen and boot loop, meh ive even tried a format rom to try to clear everything so i can get a boot loader back on it to load something else besides stock. No luck!
Click to expand...
Click to collapse
If you're experiencing a boot loop then the bootloader is actually OK. Problems with the bootloader present as a hang at the first splash screen or no splash screen at all--you don't get a boot loop.
Your problem is most likely a bad ROM install or a messed up SD internal card and the steps already given will fix both problems if you do them precisely. Some of the steps ask you to verify that some things have happened. You need to make sure that it was and not just continue on blindly.
Assuming you completed all the steps correctly, we should be able to look at the logs messages to find out if its some sort of HW problem.
Power off the gtab, connect a USB cable to the PC, and run this ADB command in a CMD window on the PC to collect the Android logs:
Code:
C:\SOME\PATH> [B]adb logcat -v time > log.txt[/B]
Then power on the gTab. Let it boot-loop a few times while the logs are being collected. Power off the gTab, stop the adb command in the window and post the log.txt file here.
Flashback 10.3 reboot problem
I can get Flashback 10.3 install - all apps run fine... but when I reboot it gets stuck on the three birds and I have to NVFlash it again.
Can someone help?
Hello I believe my HTC one is bricked. I was changing my ROM, I have done it before but its been awhile so I did it wrong and bricked it. This is what I know.
When putting in the new ROM it showed an error and I realized I forgot to clear the data and cache. So I went back into my recovery to clear the cache and I did a factory reset.
Then it started to boot loop. It would boot to my boot screen, turn off, then boot up to my recovery, show the recovery's logo screen for a very short period then turn off and go back to the HTC boot screen.
I held down the power button and volume down and managed to get to my boot loader from there I did another factory reset because I thought it would go back to stock.
I attempted an RUU to no avail.
All of that got me to where I am now. I can boot to to my boot loader and recovery. I have full access of my teamwin recovery and my boot loader. My recovery says I have no OS every time I reboot. I am not in USB debugging mode and only have access to fastboot from my computer.
I really think I just need a nuclear option to set it back to. %100 stock using only fastboot. My last resort is going into the att store and play dumb.
xeas said:
Hello I believe my HTC one is bricked. I was changing my ROM, I have done it before but its been awhile so I did it wrong and bricked it. This is what I know.
When putting in the new ROM it showed an error and I realized I forgot to clear the data and cache. So I went back into my recovery to clear the cache and I did a factory reset.
Then it started to boot loop. It would boot to my boot screen, turn off, then boot up to my recovery, show the recovery's logo screen for a very short period then turn off and go back to the HTC boot screen.
I held down the power button and volume down and managed to get to my boot loader from there I did another factory reset because I thought it would go back to stock.
I attempted an RUU to no avail.
All of that got me to where I am now. I can boot to to my boot loader and recovery. I have full access of my teamwin recovery and my boot loader. My recovery says I have no OS every time I reboot. I am not in USB debugging mode and only have access to fastboot from my computer.
I really think I just need a nuclear option to set it back to. %100 stock using only fastboot. My last resort is going into the att store and play dumb.
Click to expand...
Click to collapse
you can boot to recovery
choose advanced/sideload
then from your pc put the rom you want to push to the phone in the adb/fastboot folder
then
adb devices
(verify you phone are detect)
adb sideload name_of_the_rom_file.zip
(Wait the file is transfered to phone and recovery flash)
clsA said:
you can boot to recovery
choose advanced/sideload
then from your pc put the rom you want to push to the phone in the adb/fastboot folder
then
adb devices
(verify you phone are detect)
adb sideload name_of_the_rom_file.zip
(Wait the file is transfered to phone and recovery flash)
Click to expand...
Click to collapse
Fixed. I went into the att store and a nice gentleman told me what he did. He relocked the boatloader and ran the HTC ruu
xeas said:
Fixed. I went into the att store and a nice gentleman told me what he did. He relocked the boatloader and ran the HTC ruu
Click to expand...
Click to collapse
very good
i have the same problem but my phone is not being recognized everytime i pull up a linux terminal.
i flashed the android revolution 41 rom and after instalation i accidentally skipped the last step and got stuck in the loop
i am getting the same logo and the clockworkmod 6.0.3.4 screen for a few seconds the phone restarts and gets stuck at the htc logo.
i know some have had problems with their htc one on windows 8 so i went and made my pc ubuntu, same thing.
thanks in advance for the help
qibz said:
i have the same problem but my phone is not being recognized everytime i pull up a linux terminal.
i flashed the android revolution 41 rom and after instalation i accidentally skipped the last step and got stuck in the loop
i am getting the same logo and the clockworkmod 6.0.3.4 screen for a few seconds the phone restarts and gets stuck at the htc logo.
i know some have had problems with their htc one on windows 8 so i went and made my pc ubuntu, same thing.
thanks in advance for the help
Click to expand...
Click to collapse
Welcome to XDA
posting your problem with all the needed information in a new thread would help.
when making your post be sure and include
whats on the bootloader screen
and a copy/paste of the results from fastboot getvar all
most likely your not s-off or your not on the correct version of TWRP
also in your new post add @clsA so i get the notification that you posted
I've had my Optimus G rooted for a while now, and I had recently updated to Cyanogenmod 11 M3 and after a few weeks of good use, my phone crashed for no reason. There was a green screen that said Kernel Crash, demigod fail or something and some other stuff. Told me to press up to do this, down to do this, power to do this…. Anyways the phone wouldn't boot up after that. It was stuck on the LG logo. I could only get it into fast boot and download mode but from fast boot there was no way to get to recovery or regular boot. I found the TeenyBins post and tried to fix it using both of the .bins they had but at 85% the phone tried to boot up and was stuck on the LG logo again. Then I found the stock .bins and tried to flash them over, yet I got the same result. I've tried everything I can think to do, if anyone has any suggestions, please please help.
Teenybins don't have an OS. Did you try to get into recovery after flashing them? Doing a hard reset after stock bins may get it to boot, but internal storage will be wiped. For future reference in the demigod screen the buttons are backwards.
After flashing Teenybin I can boot into fast boot, but from there when I select recovery it goes back to the logo. Same thing happens if I select the other options. It's the google logo, not the LG logo, because the Teenybin I most recently tried was the alternate file
bowshermatthew said:
After flashing Teenybin I can boot into fast boot, but from there when I select recovery it goes back to the logo. Same thing happens if I select the other options. It's the google logo, not the LG logo, because the Teenybin I most recently tried was the alternate file
Click to expand...
Click to collapse
If you are already in fastboot, download any recovery (CWM or TWRP) extract it, rename it to recovery.img from the zip and then go to the folder where you have adb and fastboot bins and type:
fastboot flash recovery recovery.img
from there you'll be able to access recovery.
Thank you for the help, I was going to try that last night after reading your post but I took it to the AT&T store and they said they would replace it for free (warranty). I appreciate the quick response time.
Hi guys, I really need your help.
I'm new at this rooting stuffs and I tried to root my Oppo Neo 5.
I tried so many softwares like OneClickRoot, FramaRoot, and Kingroot but none seemed to work.
So I resorted to an app called oppo tools
It worked at first but I got really annoyed when my status bar suddenly colored to red when my phone discharges to 15% so I unrooted my phone and rooted back again. I really thought that was going to fix my problem but that's where the bootloop issue started.
I tried to flash some custom recovery zip but it failed since I only have a stock recovery.
But the thing is, I found a guide that says to rename the clockworkrecovery img to PG86IMG.zip.
So I did tried that and as soon as I flashed the zip from my stock recovery, my phone hanged.
I long-pressed the power button to restart and boot into recovery mode but nothing seems to happen.
I'll try to explain a bit more on how it looks when I boot my device.
When it boots normally (I mean not pressing the volume to enter recovery mode) it will only show the logo but when I try to go into recovery mode it will show the logo with a little text on the lower left portion "Recovery Mode"
Before I flashed the PG86IMG.zip, recovery mode was still working and the charging screen when off is working too.
but after I flashed the zip, every time I try to recovery mode the logo shows up with the little text but RECOVERY MODE isn't working. When I charge my phone it automatically boots up and shows the logo and text like it's trying to go recovery mode (I'm just trying to charge? It's going to recovery mode)
I tried using "adb devices" on cmd but it's not detecting any devices.
I'm really out of ideas guys, I know not all people use this model but what would be your suggestion?
A suggestion on how to fix this would really be appreciated :good:
I'm sorry I'm really new at this, please correct me if I did something wrong starting this thread. :angel:
@DeepBricked please confirm your problem, Boot-loop and can enter into recovery.
Salman Al-Badgail said:
@DeepBricked please confirm your problem, Boot-loop and can enter into recovery.
Click to expand...
Click to collapse
Oh, I'm sorry, I didn't notice.
Lately I can't access the recovery mode but now
I'm currently on Boot-loop and I can enter into recovery.
The ColorOS recovery mode only have limited function that I can mess around.
It only has the apply update, wipe data and cache, reboot, power off and system file verification.
As always I already did wipe the data and cache but nothing happens. Still boot-loop.
What should I do?
DeepBricked said:
Oh, I'm sorry, I didn't notice.
Lately I can't access the recovery mode but now
I'm currently on Boot-loop and I can enter into recovery.
The ColorOS recovery mode only have limited function that I can mess around.
It only has the apply update, wipe data and cache, reboot, power off and system file verification.
As always I already did wipe the data and cache but nothing happens. Still boot-loop.
What should I do?
Click to expand...
Click to collapse
You made a soft brick, not to worry flash it with correct stock firmware, if the phone is in warranty than ask them to do flash, this will take approx 10-30min. If it isn't in warranty than you should try it own or else pay some amount and the rest they will do.
Salman.
how about bootloop, cant enter recovery, reboot continiously when turn on even going to recovery, only fastboot isnt rebooting automaticaly but pc days drivers not succesfuly installed, and when off it qont detect by pc because of rebooting auto,
where can i find a rom for my oppo neo 5
pls help me pls
I got new OTA on my Reno2, update was installed successfully, But Now My phone is stuck in BootLoop and reboot nonstops. I can't get in Recovery mode or in fastboot Nothing works. Is there any solution to this? Any help will be much appreciated.
I am afraid there is nothing much to do, other than bring it in for repair.
You could try to deplete the battery completely, then charge it to 100% again.
Sometimes when battery if fully depleted, the device resets itself.
It's a long shot, but worth the try.
this most recent update is a bad one.
thejohnsmith13th said:
I got new OTA on my Reno2, update was installed successfully, But Now My phone is stuck in BootLoop and reboot nonstops. I can't get in Recovery mode or in fastboot Nothing works. Is there any solution to this? Any help will be much appreciated.
Click to expand...
Click to collapse
Try to boot in safe mode and if it's done, you'll be able to backup and hard reset
skimminstones said:
this most recent update is a bad one.
Click to expand...
Click to collapse
I have no problems with this updatee
thejohnsmith13th said:
I got new OTA on my Reno2, update was installed successfully, But Now My phone is stuck in BootLoop and reboot nonstops. I can't get in Recovery mode or in fastboot Nothing works. Is there any solution to this? Any help will be much appreciat
Click to expand...
Click to collapse
thejohnsmith13th said:
I got new OTA on my Reno2, update was installed successfully, But Now My phone is stuck in BootLoop and reboot nonstops. I can't get in Recovery mode or in fastboot Nothing works. Is there any solution to this? Any help will be much appreciated.
Click to expand...
Click to collapse
You can go into recovery : shutdown the phone and to start (you can try during the reboot, before logo Oppo appear) press volume down and power button during 6 or 7 second max. You need to stop pressing buttons before the and of the oppo logo. I tried now and I had a language menu (English and 2 others from Asia) and different solution like reset...