Related
1-step
in order to root these qilive devices you will need...
magisk manager apk v5.6.4
stock boot.img file
working ADB to unlock oem and flash
2-step
lets get to it
place the magisk.apk and the stock boot.img
in the internal memory of your phone (downloads)
if you like to keep stuff organized :good:
3-step
follow the vídeo tutorial and use magisk manager
to patch your stock boot.img it will output a new
boot.img that includes magisk Root (patched_boot.img)
https://www.youtube.com/watch?v=BF4_hnKgjFA
ps: major ty to hovatek team for this great tutorial
step-4 use Google drive or usb OTG to get the patched_
boot.img to your PC and place it in the ADB folder
once you have oem(bootloader) unlocked just
rename the patched_boot.img to boot.img
step-5
unlock oem, these qilive devices wont unlock
the bootloader even if you enable it in DEV options
enable USB debug in dev options
you will need to use ADB commands
command- adb devices
serial appears
command- adb reboot bootloader
phone reboots to fastboot mode
command- fastboot devices
serial appears
command- fastboot oem unlock
(MAJOR WARNING the fastboot
oem unlock will wipe/reset/factoryreset/delete your data)
after you give the command small letters will appear
on the phone screen(yes or no) hard to read dont be hasty plz
use VOLUME+ to select and VOLUME - to confirm
note: when my phone ended the unlock it whent back to
that black screen where you choose fastboot-recovery-restart
and was stuck there, side keys did nothing if this happens
just long press the power key for 10 sec it will shutdown
then press power again to turn on
first boot after unlock will take longer then normal dont freakout
after you unlock small letters will appear during boot up saying the device
is not safe unlocked ,you can later use ( fastboot oem lock )
step-6
flash the patched boot.img with ADB
command- adb devices
serial appears
command- adb reboot bootloader
phone reboots to fastboot mode
command- fastboot devices
serial appears
command- fastboot flash boot boot.img
finished/ok
command- fastboot reboot
and voila you should now have magisk
installed in the app drawer, open it!!
step-7 run the install one final time from the
magisk manager and install magisk V16 using
recomended option it will verify/patch the boot image
Do NOT select the AVB 2.0 BOX it will bootloop the phone
and your done, enjoy your qilive rooted phone.
from this point on you can use the fastboot
command- fastboot oem lock
to remove the letters in boot up about the
device not safe unlocked
WARNING oem lock
will WIPE/FACTORY RESET again (god damn it!!)
ps: i had to install twice in a row,major pain in the ....
Repeat step 7 after Wipe/Reset
here is the stock boot for 2 qilive models
you can get the stock firmware for any qilive
at this site www.doc-doapi.com/EM/qilive/smartph...te_3m-fdd-cs_mul_20170818-110645_songlixin_PC
and get the recovery or boot from the unpacked firmware file
ps:my phone is the Q8SIN4GP AND ITS WORKING FINE
A VERY SPECIAL TY to topjohnwu (magisk creator), this man is nothing
short of a God damn genius!! , and if you can donate to him.
hope this helps other qilive users to root:highfive:
quick note on the qilive models, they have two model names
the cliente name in my case Q8SIN4GP
and the factory name in my model its 882912
in order to download the right firmware for your model
you need the factory model witch is what appears in the qilive
site above, it will be in the back of the phone or the original
box on a sticker just bellow the bar code, full model exempl
:Q8SIN4GP/882912 my firmware serves several models,
these Q8 models all start with 88xxxx WARNING
dont try this using the wrong firmware/boot file or you will DAMAGE your phone
Help with BOOTLOOP problems, if you find your self stuck in a bootloop
the phone wont go past the qilive logo and just stays there, dont freak out
you will loose your data but there is a way out
just keep pressing power + Volume up until a black screen with 3 options appears
when it does let go, use Volume + to select option and Volume - to confirm
select Fastboot or alternative select recovery and then select reboot to bootloader
both option will place your phone in Fastboot mode, once in fastboot mode
connect your phone to PC and use ADB commands to fix/bootloop
command- fastboot devices
serial appears
command- fastboot oem unlock (skip this if you use phone unlocked)
a confirm action option appears on the phones screen
use Volume up to say YES / or Volume Down to say NO
Warning oem unlock will WIPE/Factory reset your phone
once it finishes the phone will be stuck on the
Recovery/fastboot/restart screen just long press the power key
until the phone shuts down
start the phone again using Power + Volume up when the black
screen with the 3 options come up, let go and use Volume up to
select Fastboot mode and confirm using Volume Down
Once in fastboot connect your phone to PC and use ADB commands
command- fastboot devices
serial apears
Here you will flash the magisk patched_boot.img
the same image you used to root your phone
command- fastboot flash boot boot.img
it will say finished-ok (or similar)
command- fastboot reboot
the boot up time will be longer than normal
but the phone should now complete the boot
and present the inicial setup screen, select language
enter your mail, the usual bla bla...
any way at this point just repeat step 7
to get root running again
sp flash tools v5.1716.
phonedriller said:
1-step
in order to root these qilive devices you will need...
magisk manager apk v5.6.4
stock boot.img file
working ADB to unlock oem and flash
2-step....
Click to expand...
Click to collapse
Hi phonedriller,
phew, I did it! (Q8S55IN4G2), thanks.
Next step: Have you found a compatible custom recovery? (especially for nandroid backups and for xposed installation)
Would be very thankful for your help!
thanks
xdatheresianum
xdacktheresianum said:
Hi phonedriller,
phew, I did it! (Q8S55IN4G2), thanks.
Next step: Have you found a compatible custom recovery? (especially for nandroid backups and for xposed installation)
Would be very thankful for your help!
thanks
xdatheresianum
Click to expand...
Click to collapse
Awsome work congrats, as for the recovery so far no luck so try not to go 2 crazy until a working recovery is up and working , install stericsons busy box this is always the first root app i install
If possible buy sterics busybox pro and titaniumbackup pro if you want to install apps to sd card apps2sd pro all of these can be tested in free
Version,again nice work congrats enjoy you rooted phone :highfive:
xdacktheresianum said:
Hi phonedriller,
phew, I did it! (Q8S55IN4G2), thanks.
Next step: Have you found a compatible custom recovery? (especially for nandroid backups and for xposed installation)
Would be very thankful for your help!
thanks
xdatheresianum
Click to expand...
Click to collapse
give a hungry man fish and you solve his problem for a day or two
teach him how to fish and you solve his problem for life
phonedriller said:
give a hungry man fish and you solve his problem for a day or two
teach him how to fish and you solve his problem for life
Click to expand...
Click to collapse
hi phonedriller,
...well, i must have been an unlucky fisherman
an app i installed ended up giving me a soft brick (bootloop between qilive icon opening screen - btw still with the "warning" of "device is unsafe etc", i.e. oem still open - and black screen, qilive opening screen etcetcetc)
have cleaned cache; went for factory reset; etc
BUT: am presently stuck when trying to go via ADB (which used to work perfectly before) that somehow the usb drivers don't want to get installed properly. as a consequence, desktop cannot see devices.
and i cannot, for the sake of me, remember how i had succeeded before installing usb drivers.
could you please help?
thx
cktheresianum
xdacktheresianum said:
hi phonedriller,
...well, i must have been an unlucky fisherman
an app i installed ended up giving me a soft brick (bootloop between qilive icon opening screen - btw still with the "warning" of "device is unsafe etc", i.e. oem still open - and black screen, qilive opening screen etcetcetc)
have cleaned cache; went for factory reset; etc
BUT: am presently stuck when trying to go via ADB (which used to work perfectly before) that somehow the usb drivers don't want to get installed properly. as a consequence, desktop cannot see devices.
and i cannot, for the sake of me, remember how i had succeeded before installing usb drivers.
could you please help?
thx
cktheresianum
Click to expand...
Click to collapse
PS: adb will not work if the phone is not booting to the OS
it will work if you manualy place the phone in fastboot AKA bootloader
MODE ,you see if it does not boot to OS then usb service is not working
use power + Volume up to enter the black menu
use the Volume up to select fastboot(bootloader) volume - to confirm
connect the phone to your PC
flash the boot.img, the same boot.img used to root (patched by magisk)
to see is adb is ok just run - fastboot devices
if a serial is presented then all other stuff should work
step 1 - reflash the boot img
step 2 - after the flash finishes - fastboot oem lock
message on the phone screen, confirm yes to lock
OEM
step 3- press power until it turns off
it should now complete the start up (boot)
if not working this method let me now
you can still flash the full factory firmware
using SP Flash Tool v5.17xx
phonedriller said:
PS: adb will not work if the phone is not booting to the OS
it will work if you manualy place the phone in fastboot AKA bootloader
MODE ,you see if it does not boot to OS then usb service is not working
use power + Volume up to enter the black menu
use the Volume up to select fastboot(bootloader) volume - to confirm
connect the phone to your PC
flash the boot.img, the same boot.img used to root (patched by magisk)
to see is adb is ok just run - fastboot devices
if a serial is presented then all other stuff should work
step 1 - reflash the boot img
step 2 - after the flash finishes - fastboot oem lock
message on the phone screen, confirm yes to lock
OEM
step 3- press power until it turns off
it should now complete the start up (boot)
if not working this method let me now
you can still flash the full factory firmware
using SP Flash Tool v5.17xx
Click to expand...
Click to collapse
dearphonedriller,
thank you so much for your speedy help.
followed the steps given by you. all is well, as you predicted, until step 3.
however:
phone (now without the "orange state" message, i.e. oem locked) still bootloops and short of ADB "fastboot devices" the desktop doesn't see the phone (and driver installation continues to fail), as per your PS (thanks!) i guess flashing the full factory firmware ("RC-mt6737...zip" quoted by you in your very first post) is next.
would you please point me to a basic-for-noobs tutorial or instruct me on the step-by-step commands/procedures using this zip file?!
HUGE thanks
ckth
xdacktheresianum said:
dearphonedriller,
thank you so much for your speedy help.
followed the steps given by you. all is well, as you predicted, until step 3.
however:
phone (now without the "orange state" message, i.e. oem locked) still bootloops and short of ADB "fastboot devices" the desktop doesn't see the phone (and driver installation continues to fail), as per your PS (thanks!) i guess flashing the full factory firmware ("RC-mt6737...zip" quoted by you in your very first post) is next.
would you please point me to a basic-for-noobs tutorial or instruct me on the step-by-step commands/procedures using this zip file?!
HUGE thanks
ckth
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=-zaEmj3-prU
turn the phone off, follow the video
flashing the full firmware is actualy easy
https://forum.hovatek.com/thread-13970.html
or searh sp flash tool here on xda
https://www.youtube.com/watch?v=LzyYXAflmOk&t=125s
phonedriller said:
https://www.youtube.com/watch?v=-zaEmj3-prU
turn the phone off, follow the video
flashing the full firmware is actualy easy
https://forum.hovatek.com/thread-13970.html
or searh sp flash tool here on xda
https://www.youtube.com/watch?v=LzyYXAflmOk&t=125s
Click to expand...
Click to collapse
thank you, phonedriller
everything worked perfectly via SPFlash Tool.
and, referring back to our above questions re the possibility of getting TWRP onto the phones, a developer friend of mine writes me this:
>try to flash TWRP:
>Download following files from this link:
>https://mega.nz/#F!qZIgnJRK!5apBfYo1je0ytg-wmA6JMQ
>- Odin3 v3.12.3 (Complete folder)
>- twrp-3.2.1-0-Q8S55IN4G2-20180318.tar
>1. Start your Phone into download mode
>2. Start Odin (Odin3 v3.12.3\Odin3.exe)
>3. Click on Options and unmark Auto Reboot
>4. Click AP and select twrp-3.2.1-0-Q8S55IN4G2-20180318.tar
>5. Press Start and wait until finished (Reset or OK!)
>6. Restart your phone immediatly to recovery mode
>7. In TWRP Recovery click on mount
>8. Set the checkbox checked at system (that system is mounted)
>9. go back and click on advanced
>10. Open file manager
>11. navigate to system/build.prop and click on build.prop
>12. Click on chmod
>13. type: 0644 and hit the accept button on screen or at the virtual
>keyboard on your phone
>14. restart your phone
i haven't tried this, but am wondering whether it might seem "reasonably possible" when reading through it.
thanks
ckth
Do you perhaps have link to Q8S5IN4GP stock rorm? Mine came with malware installed on it. I want to see if those were chinese who preinstalled or or was it decided by Auchan.
tommo1982 said:
Do you perhaps have link to Q8S5IN4GP stock rorm? Mine came with malware installed on it. I want to see if those were chinese who preinstalled or or was it decided by Auchan.
Click to expand...
Click to collapse
On my phone it came from factory and on the firmware file on 2 models , however only kasperky complains about malware on an system app called Helper bla bla bla i think its a false positive(i think) as no other antivirus or playstore ever found anything,but hey better investigate and be safe then sry right :good: maybe a ported cyanogen rom, ive look at a few rom port tutorials but my knowhow is limited + dont even have a working twrp yet, avg/avast/malwarebytes and a few others ,only kaspersky detects malware.
phonedriller said:
On my phone it came from factory and on the firmware file on 2 models , however only kasperky complains about malware on an system app called Helper bla bla bla i think its a false positive(i think) as no other antivirus or playstore ever found anything,but hey better investigate and be safe then sry right :good: maybe a ported cyanogen rom, ive look at a few rom port tutorials but my knowhow is limited + dont even have a working twrp yet, avg/avast/malwarebytes and a few others ,only kaspersky detects malware.
Click to expand...
Click to collapse
I had issues with adds being displayed at home screen and I was not able to close them. I had to use NetGuard to find that FOTA talks to 'adsup' and it is a known malware provider. I learned that some of the system apps try to talk with Alibaba servers and AdOppo (whatever it's called). Kaspersky might not be wrong, actually.
I'm trying to download stock firmware, but I don't know the file name. The website with it is locked, so unless I know exactly what I need, I cannot download it.
phonedriller said:
On my phone it came from factory and on the firmware file on 2 models , however only kasperky complains about malware on an system app called Helper bla bla bla i think its a false positive(i think) as no other antivirus or playstore ever found anything,but hey better investigate and be safe then sry right :good: maybe a ported cyanogen rom, ive look at a few rom port tutorials but my knowhow is limited + dont even have a working twrp yet, avg/avast/malwarebytes and a few others ,only kaspersky detects malware.
Click to expand...
Click to collapse
Yes i noticed the site now asks for a login that i dont have,but it was open to all until recently i have the firmware file in my pc,a few days ago i went to check for firware updates and the site was diferent and closed , in the site the download link was 882912/****** this firmware services at least 3 similar models
phonedriller said:
Yes i noticed the site now asks for a login that i dont have,but it was open to all until recently i have the firmware file in my pc,a few days ago i went to check for firware updates and the site was diferent and closed , in the site the download link was 882912/****** this firmware services at least 3 similar models
Click to expand...
Click to collapse
I guess the best thing would be a lineage or cyanogen ported rom(clean),ps i flashed the phone 2 times because of popups/adds and battery drain,however im aware that having root and installing tones of crasy stuff can fu.. Up any phone cheap or flagship,thus the firmware flashes,i discovered that having malwarebytes(premium)free for 30days keeps the phone clean and working fine,it seems that one is forced to buy from a main stream brand or risk this kind of thing,little to no support,no updates at all,bad security,the problem is certain apps if removed resoult in boot loop like this Helper app
phonedriller said:
I guess the best thing would be a lineage or cyanogen ported rom(clean),ps i flashed the phone 2 times because of popups/adds and battery drain,however im aware that having root and installing tones of crasy stuff can fu.. Up any phone cheap or flagship,thus the firmware flashes,i discovered that having malwarebytes(premium)free for 30days keeps the phone clean and working fine,it seems that one is forced to buy from a main stream brand or risk this kind of thing,little to no support,no updates at all,bad security,the problem is certain apps if removed resoult in boot loop like this Helper app
Click to expand...
Click to collapse
Ps use root + apps2sd or titaniumbackup to stop/disable the bad apps and replace them with playS app,not possible on all apps of course
phonedriller said:
I guess the best thing would be a lineage or cyanogen ported rom(clean),ps i flashed the phone 2 times because of popups/adds and battery drain,however im aware that having root and installing tones of crasy stuff can fu.. Up any phone cheap or flagship,thus the firmware flashes,i discovered that having malwarebytes(premium)free for 30days keeps the phone clean and working fine,it seems that one is forced to buy from a main stream brand or risk this kind of thing,little to no support,no updates at all,bad security,the problem is certain apps if removed resoult in boot loop like this Helper app
Click to expand...
Click to collapse
I'm thinking about Android 8.1 with it's Treble project. I might not be knowledgable enought to compile and flash it, though.
tommo1982 said:
I'm thinking about Android 8.1 with it's Treble project. I might not be knowledgable enought to compile and flash it, though.
Click to expand...
Click to collapse
Flashing is super easy use spflashtools or. Odin compiling a Rom is not , were you able to get the original firmware? You will need the original firware to get the boot and partition info from what i read so far
Unfortunately not. I will ask at the shop where I bought it how to contact tech. It should be freely available. I don't understand why Qilive restricted access to firmware.
I'll post when I learn anything.
Well, you can download the firmware if you know the file name. The bad news is, it seems the stock firmware has malware preinstalled. If there is anyone who could help confirm it. I have the ROM, and I can upload it to Google Drive if needed.
Hi all,
I'm coming back to a question lingering since the very first post here and mentioned again in post #9:
Is there a successful way to install TWRP on this Qilive model?
Re this topic:
- has anybody tried/has anybody been successful with the procedure described in post #9?
and
- has anybody seen the following TWRP builders' version (do an in-page search on Q8S55IN4G2)
https://twrpbuilder.github.io/fr/downloads/twrp/
with the download belonging to it
https://androidfilehost.com/?fid=890129502657591798
???
any successful installations to report???
Wouldn't THAT be great!!??
thanks
xdack
Hello,
This morning I turned off and on my phone (RN5 Global).
Now, If I try to start it, phone goes directly to Mi-Recovery 3.0 and, no matter how hard you try to restart, it always ends there.
More info:
- The phone is completely from stock. No root, no bootloader unlock, nothing.
- Mi-Recovery only let me Wipe All Data, so this would be an unfeasible option without first having recovered the data.
- My PC Suite does not recognize the phone.
- If I connect the mobile to the pc, 'adb devices' command says "sideload".
- If I try to make a backup by 'adb shell' it says "error: closed".
- I do not know if 'debug usb' is activated. I remember i activated it in the past, but I think that MIUI10 update deactivated it again.
- I can enter fastboot mode.
- I tried to open the phone, disconnect and connect the battery, but nothing has been fixed.
What can I do? My priorities now are:
1.- Recover the data (at least photos).
2.- Revive my phone.
Thank you.
Found this on MIUI, what do you think?
http://en.miui.com/thread-2171064-1-1.html
CiDsTaR said:
Found this on MIUI, what do you think?
http://en.miui.com/thread-2171064-1-1.html
Click to expand...
Click to collapse
If your device is Redmi Note 5 from other country but India then it´s Whyred and this Forum is for Redmi 5 Plus/Redmi Note 5 (only India) that is Vince.
In the case I´m right and your device is Whyred (two rear cameras is a simple way to note it) then as far as I know you will need an EDL authorized account to flash a rom through MiFlash Tool.
Other tool that you can use is XiaomiFlash Tool by Francesco Tescari through Mi-Recovery but you will need too have enable USB debugging (maybe you have) but the same way you can flash a rom also you´ll lose all your data.
Adb shell works only in rooted devices, you can´t backup nothing in this state and fastboot mode is limited to just few commands like list device/reboot devices and nothing more in locked bootloaders.
In this scenario you have two things in order to solve this issue:
1- Highly probable loosing all your data.
- Doing format data through recovery and try to boot (data lost for sure)
- Flashing a rom through recovery with the mentioned tool (99% data lost probabilities)
- Flashing a rom through EDL; if you have Vince you can do it but if you have Whyred I don´t think so (if you choose second option "Flash without erase userdata" in MiFlash Tool I guess your data will be preserved)
2- If you enabled before USB debugging and binded your Mi account with device wait the time to unlock bootloader and maybe booting first of all in TWRP you can recover some data from your device, if you unlocked but first of all you boot on system for sure all your data will gone.
So what happened? Were you able to solve it? PLs share if you were...
I am also faced that situation.
When i tried to flash stock miui through fastboot it locked the bootloader and cant boot into rom then mi flash tool cant flash as boot loader is locked.
Worst part is in order flash another rom i need recovery, unable to reach developers option as rom not booting up.
Lost hope on the device
After all so many google searches and sleep less nights
I found application called mi pc suite china
Try to flash miui rom through mi pc suite mode
It says boot loader locked do you want to unlock
Finally it unlocked boot loader without booting into mobile.
In your case that will app will work. try it
gldvs007 said:
I am also faced that situation.
When i tried to flash stock miui through fastboot it locked the bootloader and cant boot into rom then mi flash tool cant flash as boot loader is locked.
Worst part is in order flash another rom i need recovery, unable to reach developers option as rom not booting up.
Lost hope on the device
After all so many google searches and sleep less nights
I found application called mi pc suite china
Try to flash miui rom through mi pc suite mode
It says boot loader locked do you want to unlock
Finally it unlocked boot loader without booting into mobile.
In your case that will app will work. try it
Click to expand...
Click to collapse
THANK YOU THIS HELPED ME OUT A LOT
I JUST INSTALLED THE APP THROUGH THIS LINK - https://miui.blog/any-devices/china-mi-pc-suite-english-translation/
AND THEN CONNECTED MY MI4i TO THE PC. IT AUTOMATICALLY ADDED THE STOCK REQUIRED FROM THE INTERNET AND I DIDNT CLICK ANYTHING IN THE APP.
RehanSiddiqui said:
THANK YOU THIS HELPED ME OUT A LOT
I JUST INSTALLED THE APP THROUGH THIS LINK - https://miui.blog/any-devices/china-mi-pc-suite-english-translation/
AND THEN CONNECTED MY MI4i TO THE PC. IT AUTOMATICALLY ADDED THE STOCK REQUIRED FROM THE INTERNET AND I DIDNT CLICK ANYTHING IN THE APP.
Click to expand...
Click to collapse
BIG THANKSS, THIS HELP ME TOO
In my case my Redmi Note 7 MIUI 11.xx and had a update notification
im accidenly hold my power button my, and ALWAYS go to MI-Recovery 3.0 after several reboot
Im downloading that app and updating that app,
And copy the translate file from China to English (my pc WINDOWS 10 64x)
i chose "Connect to Mi Assistant" in phone connect to my pc and open the app, that can see my current ROM (MIUI 11.xx) can be update to "MIUI 12.xx" ,im flashing(updating) with "LEFT" option
that say "CAN SAVE UR SEVERAL FILES" than option RIGHT(DELETE ALL FILES) i guess i dont much remember
Im flashing(updating) with hope my files still in there,
The app start downloading the ROM and instaling to my phone 0% to 100%
My phone reboot and had notify "The system has been destroy"
After restarting several time, Im lossing hope on my phone,
Im trying hold my -Volume button while rebooting, then my phone booting on MIUI 12 in several minute
And "EVERYTHING ITS FINE" i have my all files,app,photos, just like my regular phone but have new MIUI 12 update Introduce changelog
I just wanna share my experience
THANK YOU A LOT
Seeing this Stuck in Mi Recovery 3.0 with a stock device
Thanks Dude... It works for my MI Poco F1.
Steps
Download chinese version of mi app (version 3 beta) from below link
Replace English Translated mi_phone_assistant.res file in installation folder.
Connect Mobile with PC
Open the Mi App Then Click the update button which shows upon opening
Phone automatically came back to normal (No loss in Data) and Remove Cable. Don’t Flash Data.
China Mi PC Suite with English Translation | MIUI Blog
Mi app recovery will not work on older phones like vince i suggest flashing through test point by removing the back cover and reconnect both points
mccholai said:
Seeing this Stuck in Mi Recovery 3.0 with a stock device
Thanks Dude... It works for my MI Poco F1.
Steps
Download chinese version of mi app (version 3 beta) from below link
Replace English Translated mi_phone_assistant.res file in installation folder.
Connect Mobile with PC
Open the Mi App Then Click the update button which shows upon opening
Phone automatically came back to normal (No loss in Data) and Remove Cable. Don’t Flash Data.
China Mi PC Suite with English Translation | MIUI Blog
Click to expand...
Click to collapse
it stuck at 99%
CiDsTaR said:
Hello,
This morning I turned off and on my phone (RN5 Global).
Now, If I try to start it, phone goes directly to Mi-Recovery 3.0 and, no matter how hard you try to restart, it always ends there.
More info:
- The phone is completely from stock. No root, no bootloader unlock, nothing.
- Mi-Recovery only let me Wipe All Data, so this would be an unfeasible option without first having recovered the data.
- My PC Suite does not recognize the phone.
- If I connect the mobile to the pc, 'adb devices' command says "sideload".
- If I try to make a backup by 'adb shell' it says "error: closed".
- I do not know if 'debug usb' is activated. I remember i activated it in the past, but I think that MIUI10 update deactivated it again.
- I can enter fastboot mode.
- I tried to open the phone, disconnect and connect the battery, but nothing has been fixed.
What can I do? My priorities now are:
1.- Recover the data (at least photos).
2.- Revive my phone.
Thank you.
Click to expand...
Click to collapse
Just remove SD card & SIM tray from phone and restart. I work for me. try at our end. Don't flash or connect anything.
CiDsTaR said:
Hello,
This morning I turned off and on my phone (RN5 Global).
Now, If I try to start it, phone goes directly to Mi-Recovery 3.0 and, no matter how hard you try to restart, it always ends there.
More info:
- The phone is completely from stock. No root, no bootloader unlock, nothing.
- Mi-Recovery only let me Wipe All Data, so this would be an unfeasible option without first having recovered the data.
- My PC Suite does not recognize the phone.
- If I connect the mobile to the pc, 'adb devices' command says "sideload".
- If I try to make a backup by 'adb shell' it says "error: closed".
- I do not know if 'debug usb' is activated. I remember i activated it in the past, but I think that MIUI10 update deactivated it again.
- I can enter fastboot mode.
- I tried to open the phone, disconnect and connect the battery, but nothing has been fixed.
What can I do? My priorities now are:
1.- Recover the data (at least photos).
2.- Revive my phone.
Thank you.
Click to expand...
Click to collapse
how u solved your problem , i am stuck in same stage .. help please
I was stuck in Mi Recovery Mode 3.0 on my Mi Redmi Note 5.
Even after doing reboot to system, it wasn't going back to normal.
After scratching my head for a lot of time I decided to do the old school thing, i.e. REMOVING the SIM card and SD card and pressing the VOLUME DOWN + POWER KEY until the vibration occurred (NOTE: Mi logo will appear while you have pressed but keep the 2 buttons pressed until vibration occurred).
harsimran27 said:
I was stuck in Mi Recovery Mode 3.0 on my Mi Redmi Note 5.
Even after doing reboot to system, it wasn't going back to normal.
After scratching my head for a lot of time I decided to do the old school thing, i.e. REMOVING the SIM card and SD card and pressing the VOLUME DOWN + POWER KEY until the vibration occurred (NOTE: Mi logo will appear while you have pressed but keep the 2 buttons pressed until vibration occurred).
Click to expand...
Click to collapse
were any files deleted? and do you perhaps know if it would work on redmi note 7?
hello guys just look this video i solved it
Hi all,.
I also faced the same issue my redmi note 5 Pro which was on I believe MIUI 10 because it was never updated from the day it was purchased got stuck in bootloop and not getting ahead after recovery mode no matter how much time you reboot it was all working fine but some apps were updating such as youtube when this incident occurred I tried every solution like pressing keys pressing all three keys simultaneously or ADB method but none could work since the phone was locked also there was no USB debugging so adb method wouldn't work to also if an if ADB connected I couldn't flash because it will remove the data, in recovery mod you can see in option connect with MI Assistant but the Indian English version shown no connection so found one youtube video (channel name -" Ach Sharif ", video link-
which helped to install chinese version and and solved login issues I used Google translate translate to read the Chinese characters and understand what is going on I connected the device intending to take a backup backup but as no option was available I had to click on flash device so it downloaded upgraded recovery rom and automatically flash to MIUI 11 but still same problem then again I connected and upgraded to MIUI 12 and the phone was able to boot so the phone finally got fixed all data and all apps were intact and working as originally also all data of WhatsApp chats etc remained even the open apps at the time when problem happened were still present.
I believe guys this is the only solution to the problem because while flashing it replaces the recovery module of the rom which was corrupted earlier in my case when MIUi 12 installed not 11 I feel that it replaced recovery module due to update and it was able to work so please try once and I hope you get your files back, now lesson learned please do regular backups to live worry free life otherwise we will be spending time and energy here only.
I believe ADB methods or other methods won't work because they will flash and you won't be able to get data only flashing through recovery ROM not fastboot rom just like update package will be able to solve your problem if it is a software problem it will be can be fixed fixed this way only and saving data if it's a hardware problem such as power of all volume buttons are stucked you just get change and everything will be fine it happened in my other phone redmi Y2 so from speaking from experience thats all as I was going through trouble these things really help me so I thought to spend time in creating this guide please follow and I hope it will be solved.
You must open back cover( easily you can do it by hair dryer) and disconnect and connect again the battery, it will fix
Hi People,
I hope I am putting this question in the proper location.
I have had several attempts ate flashing a new ROM to my device as it was the Chinese version & kinda useless to me not having Play store or several other APPs I want. I also wanted to try ROOT a phone for the first time.
I managed to get as far as getting ADB & fastboot working & TWRP installed on the device. The first ROM I had put in my file storage was corrupt so I tried the Lineage 17 version which "seemed"to install with a success message, but the phone would only boot into TWRP. so I tried the Havoc ROM from the thread in this site area. Same thing, would only boot into TWRP. Then I thought I would start over & install the factory ROM from: https://xiaomifirmwareupdater.com/miui/olivelite/stable/V12.0.2.0.QCPMIXM/ with ADB & fastboot. I got a success message from the MiFlash tool but the device is now saying the "MIUI verson cannot be installed on this device" in one screen from the Redmi-Recovery 3.0 menu that's now on it.
From here I can Reboot, wipe data or connect with MiAssistant. When I try MiAssistant (PC Suite) the phone does not connect to my PC but I can see the ADB device from device manager and ./adb fastboot devices shows a serial number -but connected as sideload if that makes a difference?
I hope I explained well enough to be understood. Is there anything I can do from here to get it working or is it fully stuffed?
Ur device's bootloader still unlocked?
T0B3R said:
Hi People,
I hope I am putting this question in the proper location.
I have had several attempts ate flashing a new ROM to my device as it was the Chinese version & kinda useless to me not having Play store or several other APPs I want. I also wanted to try ROOT a phone for the first time.
I managed to get as far as getting ADB & fastboot working & TWRP installed on the device. The first ROM I had put in my file storage was corrupt so I tried the Lineage 17 version which "seemed"to install with a success message, but the phone would only boot into TWRP. so I tried the Havoc ROM from the thread in this site area. Same thing, would only boot into TWRP. Then I thought I would start over & install the factory ROM from: https://xiaomifirmwareupdater.com/miui/olivelite/stable/V12.0.2.0.QCPMIXM/ with ADB & fastboot. I got a success message from the MiFlash tool but the device is now saying the "MIUI verson cannot be installed on this device" in one screen from the Redmi-Recovery 3.0 menu that's now on it.
From here I can Reboot, wipe data or connect with MiAssistant. When I try MiAssistant (PC Suite) the phone does not connect to my PC but I can see the ADB device from device manager and ./adb fastboot devices shows a serial number -but connected as sideload if that makes a difference?
I hope I explained well enough to be understood. Is there anything I can do from here to get it working or is it fully stuffed?
Click to expand...
Click to collapse
You should flash China factory rom, if you can.
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
Hey community,
I have been running Poco F1 with twrp and PixelExperience for the last 2 years. Considering the past record of the OS and my experience with the OS, I decided recently to upgrade to the newer PE12 for Poco F1 (maintained by Lakshay Garg). It went smooth initially and after the last OTA update, the phone started behaving weirdly.
Long story short,
This morning the phone went into an automatic restart and is now stuck in a boot loop. It boots and reaches the "G" logo and reboots. However, the weird part is,
Code:
fastboot flash
and
Code:
fastboot boot
are not available, throwing errors. The device is visible in
Code:
adb devices
and
Code:
fastboot devices
. This problem occurs when the phone is not plugged in. Once plugged in, the phone runs fine and everything just works. TWRP is not accessible, as if it is not there anymore and the only recovery that I can reach is the pixel recovery which has no option to flash any custom recovery (newbie, so not sure if something like this should exists or not).
I've tried various threads here and wasn't able to find any solution. Let me know what commands/outputs you guys might need from the device to help me in this.
Thanks in advance. Hope this gets fixed soon.
tysonX5653 said:
Hey community,
I have been running Poco F1 with twrp and PixelExperience for the last 2 years. Considering the past record of the OS and my experience with the OS, I decided recently to upgrade to the newer PE12 for Poco F1 (maintained by Lakshay Garg). It went smooth initially and after the last OTA update, the phone started behaving weirdly.
Long story short,
This morning the phone went into an automatic restart and is now stuck in a boot loop. It boots and reaches the "G" logo and reboots. However, the weird part is,
Code:
fastboot flash
and
Code:
fastboot boot
are not available, throwing errors. The device is visible in
Code:
adb devices
and
Code:
fastboot devices
. This problem occurs when the phone is not plugged in. Once plugged in, the phone runs fine and everything just works. TWRP is not accessible, as if it is not there anymore and the only recovery that I can reach is the pixel recovery which has no option to flash any custom recovery (newbie, so not sure if something like this should exists or not).
I've tried various threads here and wasn't able to find any solution. Let me know what commands/outputs you guys might need from the device to help me in this.
Thanks in advance. Hope this gets fixed soon.
Click to expand...
Click to collapse
Seems to be a battery problem. How old is it? You may need to replace it.
However make sure you followed the clean install method before you come on a conclusion. Also try to not use any Magisk modules.
Best Clean Install method:
Backup all your data. All your data into Internal Storage will be lost during this process.
Download latest Official TWRP Recovery, Pixel Experience build.
Create one Folder and move all the files you downloaded there.
Reboot to Fastboot Mode
Connect your device to PC and Boot into to TWRP via ADB or Minimal ADB and Fastboot:
Code:
fastboot boot <recovery_filename>.img
Example:
Code:
fastboot boot C:\Users\Retrial\Desktop\twrp-3.6.1_9-0-beryllium.img
Select Wipe > Advanced Wipe -> Select Dalvik / ART Cache, System, Data, Internal Storage, Vendor, Cache and then Swipe to Wipe.
Go back and select Wipe > Format Data > type yes
While you are in TWRP, transfer the Folder with the files you downloaded above.
Flash Pixel Experience ROM.
Flashing the ROM will replace TWRP with PE Recovery so OTA updates can be installed without problems since TWRP currently doesn't support decryption on A12 encypted ROMs - If you need in future to change ROM just fastboot boot to twrp via adb and flash img of twrp to recovery partition.
Done! Reboot to system.
Thanks, turns out that it was a battery problem after all. After battery replacement everything is working just fine. I also installed Awaken OS as Pixel Experience was removing the TWRP recovery each time I flashed it. Now as for my fastboot, initially it was not working; it was showing this error whenever I tried to flash TWRP recovery or any stock recovery:
Sending 'boot.img' (38640 KB) FAILED (Write to device failed (Cannot send after transport endpoint shutdown)) fastboot: error: Command failed
After this, the fastboot mode was diconnected and my phone was showing this Error:
Press any Key to Shut Down
It was resolved by running this bat file (as admin) :
https://bit.ly/31T2LcB
After running this file, there was no error and I was able to flash the twrp Recovery smoothly. So thanks for all the help really appreciate it.
tysonX5653 said:
Thanks, turns out that it was a battery problem after all. After battery replacement everything is working just fine. I also installed Awaken OS as Pixel Experience was removing the TWRP recovery each time I flashed it. Now as for my fastboot, initially it was not working; it was showing this error whenever I tried to flash TWRP recovery or any stock recovery:
Sending 'boot.img' (38640 KB) FAILED (Write to device failed (Cannot send after transport endpoint shutdown)) fastboot: error: Command failed
After this, the fastboot mode was diconnected and my phone was showing this Error:
Press any Key to Shut Down
It was resolved by running this bat file (as admin) :
https://bit.ly/31T2LcB
After running this file, there was no error and I was able to flash the twrp Recovery smoothly. So thanks for all the help really appreciate it.
Click to expand...
Click to collapse
Did you face the problem again?
I am using PE11 since last 2 years but suddenly i started facing the same problem. When plugged in, works fine. When I unplug it, works until screen is on and when I use power button to lock or unlock, phone goes into bootloop. I opend it in twrp where it can work as long as battery lasts, that's why I am not sure if it's a battery problem or something else
Hi there! I'm hoping someone on XDA Developers can help me sort out a root gone-wrong.
I did my best to follow the guide on XDA. I have an Umidigi A9 Pro with 6gb ram. I was successfully able to get the android tools on PC and was able to unlock the bootloader. I went to the Umidigi website to get the ROM. I think I *might* have grabbed the wrong one. Once I got this zip from the Umidigi website, I unzipped the folder and copied the boot.img that was in that root folder to the device. I then went into Magisk and patched the img. I then copied the patched img to my PC then use the commands on the XDA guide to flash the image to the device, the flash was successful (I think). However the device is now stuck in a boot loop. The device displays the Umidigi OEM logo and the android logo; underneath it says in small text:
Orange State
Your device has been unlocked and can't be trusted
Your device will boot in 5 seconds
after 5 seconds the screen goes black and then comes back with the same screen. This happens continuously. I have tried holding the volume down, the power button, and several combinations of volume up, down, and power. Holding all buttons down makes the screen stay black, however while plugged into the PC the PC still makes the device connected and disconnected sounds off and on. Whenever I release the buttons, it goes right back to the loop. Windows PC plays the device connected and disconnected sound on and off. The command prompt is not able to affect the device. When I run "adb devices" it doesn't display the phone so it doesn't seem that windows is detecting the device.
ROM: https://community.umidigi.com/forum.php?mod=viewthread&tid=22236&extra=page=1
https://www.umidigi.com/page-Download.html
I'm hoping for some help on this one
Thank you!
It should be obvious that when being in a bootloop ADB cannot function: On Android side the ADB daemon gets started and after seconds closed, and this over and over again.
In the simplest explanation, a bootloop describes when your phone is stuck in a loop of rebooting. The term "bootloop" is just a more common way of saying "reboot loop."
Curious if you ever managed to get this figured out? I'm in essentially the same situation, though I was not attempting to flash a ROM. I successfully managed to get TWRP 3.5.2 installed and then I was trying to get Magisk installed.
My phone data was wiped, which honestly I didn't care about, however I must have done something wrong with the Magisk installation as now I have the rebooting issue.
I'm able to use ADB and have been trying to push a ROM to the sdcard folder of the internal storage. ADB says the file has successfully completed, but nothing is on the phone. I fixed the issue of the storage showing up as 0MB by changing from EX4 to EX2 and then changed it back to 4.
Really unsure of how to flash a ROM if I can't get the file to pushed to the phones internal memory though.
Zeidwinder said:
Curious if you ever managed to get this figured out? I'm in essentially the same situation, though I was not attempting to flash a ROM. I successfully managed to get TWRP 3.5.2 installed and then I was trying to get Magisk installed.
My phone data was wiped, which honestly I didn't care about, however I must have done something wrong with the Magisk installation as now I have the rebooting issue.
I'm able to use ADB and have been trying to push a ROM to the sdcard folder of the internal storage. ADB says the file has successfully completed, but nothing is on the phone. I fixed the issue of the storage showing up as 0MB by changing from EX4 to EX2 and then changed it back to 4.
Really unsure of how to flash a ROM if I can't get the file to pushed to the phones internal memory though.
Click to expand...
Click to collapse
I honestly haven't messed with it since. It was a very cheap extra android phone I had laying around. Once it got messed up I pretty much just put it in a drawer and said "maybe another day"