I'm going to be receiving a new RN3 SD in a couple of days. Since I ordered from Banggood I'm expecting to receive it with a spammed ROM and am planning to flash it immediately via EDL with the latest MIUI 8 stable ROM. Since it might take a while to get unlock permission and to make the unlocker work, I'd like to know if the following method will work to root the phone and install Xposed with a locked boot loader:
1. Boot phone into fastboot.
2. Temporarily boot TWRP recovery via fastboot command..
3. Flash Supersu.zip and Xposed with TWRP.
4. Reboot phone normally.
Since Android Lollipop doesn't use a hash of /system to check for tampering, I was hoping tis would work.
Thanks.
induna said:
I'm going to be receiving a new RN3 SD in a couple of days. Since I ordered from Banggood I'm expecting to receive it with a spammed ROM and am planning to flash it immediately via EDL with the latest MIUI 8 stable ROM. Since it might take a while to get unlock permission and to make the unlocker work, I'd like to know if the following method will work to root the phone and install Xposed with a locked boot loader:
1. Boot phone into fastboot.
2. Temporarily boot TWRP recovery via fastboot command..
3. Flash Supersu.zip and Xposed with TWRP.
4. Reboot phone normally.
Since Android Lollipop doesn't use a hash of /system to check for tampering, I was hoping tis would work.
Thanks.
Click to expand...
Click to collapse
You can't flash anything via fastboot on a locked bootloader. Just wait for your permission or you can try Kingsroot for rooting.
harishmenace said:
You can't flash anything via fastboot on a locked bootloader. Just wait for your permission or you can try Kingsroot for rooting.
Click to expand...
Click to collapse
Kingroot doesn't work with redmi note 3
( not just kingroot , any root software won't work with Rn3. , only way to root is to flash supersu.zip through recovery after unlocking bootloader )
Sent from my Redmi Note 3 using Tapatalk
You can also create account now while you wait for your phone and apply for unlocking feature now
I've done that and when the phone arrived I already had all ready
I have a Z5C(E5803) that was originally able to unlock the bootloader and let me flash ROMs, specifically the Cyanogen ROM that CTXz has been working on. I ran out of power and got stuck in some kind of nasty bootloop yesterday that prompted me to re-flash boot.img and TWRP.
After I did these things I left it charging for a few hours and it was able to boot into TWRP where I then restored it to a backup of the basic Xperia pre-loaded ROM.
This all worked fine, thought I could boot into TWRP and just flash the Cyanogen zip again. I can get into TWRP just fine but I attempt to flash Cyanogen I get an "ERROR 7"
I have since done several wipes, gotten into the bootloader settings by entering that code in the dialer and have seen that bootloader unlock = no. I distinctly remember bootloder unlocking being allowed the first time I installed CM on my device, what could have caused this?
I was able to use it with fastboot anyway and install CM13 again, maybe this was a bug?
When I tried using oem unlock command with fastboot it said my device was already rooted even though I had just restored from a backup, and then I just proceeded normally from there.
use CM13 official Recovery to FLASH CM13.
also i don't think so twrp3.0.2 is out there for z5c. are you using any other variants Twrp? (YUGA ? )
Hi all people,
first of all, I want excuse me for not my perfect English.
I have Honor 9 from few days. And I think to have bricked it.
I have unlocked bootloader correctly.
I have flashed recovery this TWRP recovery with the intention to proceed to root with Magisk or SuperSu. I accidentally and unconsiuosly do factory reset then the phone goes bootloop. (it power off and power on continuously) with the alert "your device has been unlocked and..etc".
Yesterday, reading this thread, I flashed, from fastboot console, boot, recovery and system, the phone resets two/three times then goes to eRecovery where I do a factory reset.
After a factory reset the phone works correctly and seems successfully unbricked. So I re-flash TWRP recovery.
But this morning, during the attempt to install from TWRP one between Magisk or SuperSu (I don't succeed to do it beacuse the phone was crypted and I don't see zip files from TWRP). I have reset the phone but goes bootloop again.
I tried to re-flash boot, recovery, system and cust more (that I don't have flashed yesterday). Now the phone goes eRecovery and ask me to connect to download latest version and recovery, but don't ask me to do a factory reset.
Now I don't know what I can do.
How I can solve this situation? I want only unlock bootloader (done!), install TWRP and have root permission. Now I don't think to change rom.
Something similar happened to me. It seems like the TWRP provided has some issue..... After installing TWRP I had a bootloop problem. I have resolved installing Magisk. It seems that Magisk patchs something. If you can access TWRP try to install Magisk (put the zip file on external sd). In other words: copy magisk zip on sd card - during the bootloop you have the chance to power off phone - Power off - Power on in recovery mode. If you have TWRP correctly installed Honor should go in recovery using TWRP . Install Magisk and see what happens...
unvisigoth said:
Something similar happened to me. It seems like the TWRP provided has some issue..... After installing TWRP I had a bootloop problem. I have resolved installing Magisk. It seems that Magisk patchs something. If you can access TWRP try to install Magisk (put the zip file on external sd). In other words: copy magisk zip on sd card - during the bootloop you have the chance to power off phone - Power off - Power on in recovery mode. If you have TWRP correctly installed Honor should go in recovery using TWRP . Install Magisk and see what happens...
Click to expand...
Click to collapse
I have tried to flash TWRP recovery again to do install Magisk from sd card. I have done it but the phone doesn't work fine.
So I have put rommco05 TWRP Backup into sd card then restored it from TWRP restore (boot and vendor img). Now the phone seems have bootloader locked, in fact I don't have bootloader warning at the power on. Now in fastboot mode the phone says me that I have Phone locked and FRP unlocked.
How can I exit from this situation?
Try this
Killus3 said:
Hi all people,
first of all, I want excuse me for not my perfect English.
I have Honor 9 from few days. And I think to have bricked it.
I have unlocked bootloader correctly.
I have flashed recovery this TWRP recovery with the intention to proceed to root with Magisk or SuperSu. I accidentally and unconsiuosly do factory reset then the phone goes bootloop. (it power off and power on continuously) with the alert "your device has been unlocked and..etc".
Yesterday, reading this thread, I flashed, from fastboot console, boot, recovery and system, the phone resets two/three times then goes to eRecovery where I do a factory reset.
After a factory reset the phone works correctly and seems successfully unbricked. So I re-flash TWRP recovery.
But this morning, during the attempt to install from TWRP one between Magisk or SuperSu (I don't succeed to do it beacuse the phone was crypted and I don't see zip files from TWRP). I have reset the phone but goes bootloop again.
I tried to re-flash boot, recovery, system and cust more (that I don't have flashed yesterday). Now the phone goes eRecovery and ask me to connect to download latest version and recovery, but don't ask me to do a factory reset.
Now I don't know what I can do.
How I can solve this situation? I want only unlock bootloader (done!), install TWRP and have root permission. Now I don't think to change rom.
Click to expand...
Click to collapse
https://forum.xda-developers.com/honor-9/help/bootloader-locked-help-to-enable-usb-t3683145
Rommco05 said:
Again unlock bootloader
Click to expand...
Click to collapse
I have unlocked bootloader again and do a factory reset from TWRP recovery, now the phone seems works correctly!!!:good:
Now I should try to root the phone with Magisk or SuperSu, right?
I have a question about TWRP. From TWRP's file manager I don't see the files that I put in the internal memory. It's because I have used finger print to lock the phone that encryptes files?
raw_jay said:
https://forum.xda-developers.com/honor-9/help/bootloader-locked-help-to-enable-usb-t3683145
Click to expand...
Click to collapse
This is to re-brand the phone from Chinese to EU version...I don't think is my case.
Rommco05 said:
Take a backup before make root. You don't see files because is some issue with decryption in TWRP. I achieved root with Magisk but I don't remember exactly steps
Click to expand...
Click to collapse
I think it's too late
Anyway I can re-flash all thing from begin.
Then I can't use TWRP with the phone encrypted ( PIN, password, fingerprint, etc...) ?
Rommco05 said:
I'm not sure about thatz Huawei roms are encrypted somehow by default
Click to expand...
Click to collapse
After I have installed Magisk (v14.0) now I have problem with google play services which don't download and do updates apps.
If I do a factory reset again I can solve it?
Update:
After I done a factory reset from TWRP recovery
and formatting data partition the phone seems working perfectly (I don't know why, but before format data the phone says me that I have only 150mb of memory space)
I say "seems" because there's something getting me in trouble, for example, I don't have anymore ringtones in the settings menu.
And I don't know if I have lost something else.
Exists a possibilty to restore all contents of the phone?
You could try this and flash your phone back to stock. But then you would need to unlock your bootloader and install TWRP again. Another way would be to unpack an image of your ROM and flash system and other parts via fastboot. Of course this could be risky and you could brick the device.
Meranico said:
You could try this and flash your phone back to stock. But then you would need to unlock your bootloader and install TWRP again. Another way would be to unpack an image of your ROM and flash system and other parts via fastboot. Of course this could be risky and you could brick the device.
Click to expand...
Click to collapse
If I understand it well...
I have 2 options:
1) Rebrand the phone and flashin, then at end I have back the phone stock.
2) Unpack the image of ROM (what it means?) and flash system and other parts via fastboot. (Which are those parts? How?) But this procedure is more hazardous then rebrand procedure?
I have understand right?
1. Yes, correct. I would recommend that. Everything is explained in the thread I linked. Of course everything you do could potentially harm your phone, but you should know that already.
2. Get an update.app file for your specific phone model (there are threads already here, just search a bit, or use Firmware Finder), open it with the Huawei Update Extractor and extract the parts you want to flash (like system or recovery). Then flash them via fastboot. I tried this because I was in a situation like yours, but it didn't work for me. But in theory it could, because you would replace the faulty parts of your firmware.
Killus3 said:
I have understand right?
Click to expand...
Click to collapse
Could you solve your problem?
Meranico said:
Could you solve your problem?
Click to expand...
Click to collapse
Hi, I don't say it because I have replaced the phone with another same.
Now I'm starting to unlock bootloader, installing recovery TWRP and rooting the phone.
I hope to avoid bootloop this time.
Goodmorning everyone!
Yesterday I have:
- Unlocked bootloader correctly!
- Installed TWRP correctly!
- Make a TWRP Backup of all partitions of the device, except data partition because TWRP gives me an error during backup attempt.
- Then I start the device.
- After start the device I go to recovery TWRP to install Magisk, but the phone goes bootloop.
After reboot 2-3 times on the screen appears for a few moments a message of eRecovery that have restored something but I don't know. Then the device shows me the eRecovery that asks me to make a factory reset.
At this point I shutdown the device, go in TWRP to flash Magisk unistaller and the device goes out bootloop and works fine but without root.
How I can solve this problem and install Magisk and have root finally?
Some question:
-When I flashed TWRP (via fastboot) and I configurate it, example language, hours, etc... TWRP don't save the settings, in fact when I go in TWRP again I do remake the settings. Why?
-Then I go in sdcard I don't navigate files, I see folders with casual characters. This is an effect of encryption of the device?
Killus3 said:
Goodmorning everyone!
Yesterday I have:
- Unlocked bootloader correctly!
- Installed TWRP correctly!
- Make a TWRP Backup of all partitions of the device, except data partition because TWRP gives me an error during backup attempt.
- Then I start the device.
- After start the device I go to recovery TWRP to install Magisk, but the phone goes bootloop.
After reboot 2-3 times on the screen appears for a few moments a message of eRecovery that have restored something but I don't know. Then the device shows me the eRecovery that asks me to make a factory reset.
At this point I shutdown the device, go in TWRP to flash Magisk unistaller and the device goes out bootloop and works fine but without root.
How I can solve this problem and install Magisk and have root finally?
Some question:
-When I flashed TWRP (via fastboot) and I configurate it, example language, hours, etc... TWRP don't save the settings, in fact when I go in TWRP again I do remake the settings. Why?
-Then I go in sdcard I don't navigate files, I see folders with casual characters. This is an effect of encryption of the device?
Click to expand...
Click to collapse
Answers to all your concerns go here mate---> TWRP doesn't decrypt data. Done.
Hence: weird folders in there, nowhere to store its settings prefs, about Magisk it's another story, if you want root go SuperSU latest beta.
Regards.
a basically did what that guy did, got root installed via TWRP but my google apps are all busted.
I tried flashing the update_data_full_public.zip and update_full_hw_usa.zip I found using the russian device lookup link switching trick but I the HW errored when I tried to flash it in TWRP and my play store still broken.
Hi,
i found my rn4 SD locked with "activate phone", and once unlocked it was wiped as well.
I am on the official global stable 9.6.2.0.
Question: if I root, since unlocking bootloader will wipe it again as well, will I find any files with PC recovery tools or is that useless?
Otherwise I will just go ahead and use it as it is.
Since I had not planned to mod this device, I need to check the correct steps to root.
I suppose that would be mi unlock (waiting the 72 hours).
Install twrp
root
?
Thanks for any help
Hello, I have to sell my realme 7 pro and I must relock bootloader and replace recovery stock. My version is EU variant - RMX2170_11_A.36, with TWRP .
I know that I have to return stock recovery before locking bootloader otherwise bootloop.
I can't find the right recovery for my phone, i found only a.37 - a37 - a39
What are the right steps I have to follow? Thanks
Found this thread: https://forum.xda-developers.com/t/guide-relock-bootloader-back-to-stock.4172569/
Stock roms can be downloaded here: https://realmeupdater.com/downloads/latest/RMX2170EU/
Simply flashing stock rom should help?
thanks bro, I have succesfully backed to stock my phone. I've followed method 2, flashing .ozip (same version already installed) through twrp. Once done, I rebooted to system without setup, and then recovery stock was reinstalled. Then I locked bootloader again by fastboot flashing lock.