Related
If you ...
find a bug or problem on 2.2, post here
find a solution on how to fix the bug, post here
want to get help on how to fix the bug, post here
anything else, goes here
This thread are meant for bug/problem solution and reported bug list of 2.2 custom ROM which i will try to manage, so people are not posting same bug, and asking for same solution all over again in X10 Custom ROM AOSP thread.
Limitation
Cannot Mount via USB
2.2 Custom ROM put the SYSTEM partition on your phone memory and the DATA partition in your SD card. That is why you cannot dismount the SD card from Android to mount to your PC.
No App2SD
2.2 Custom ROM is still running on 2.1 Custom Kernel which not supporting this.
Bug list
#0001 - WiFi not working - Fixed on 2.2
#0002 - Random android.process.media force close - Fixed on 2.2
#0003 - Home button not working, and no Lock Screen - Fixed on 2.2
#0004 - Cannot install certain APK (Angry Bird)
#0005 - No radio, no network and flashing Home - New on 0.0.2
#0006 - ADB shell have SU access, but Titanium Backup cannot work - New on 0.0.2
#0007 - SD Card non-ascii folder show as ???
#0008 - Facebook Contact Sync not available
#0009 - CPU Governor set to performance by default
Solutions for bugs
#0001 - How to enable WiFi on 2.2 Custom ROM
1. Try to enable WiFi, of course it will not work.. just do it.
2. WiFi will goes off automatically
3. Run
Code:
adb shell /system/bin/wlan_tool
4. If the adb stucks, just press CTRL+C
5. Repeat step 4 until you crash the phone
6. After reboot, your WiFi will work.
or
Code:
adb shell killall servicemanager
Post Reference
#0002 - android.process.media FC solution
0.0.1 compiled with prefilled databases which invalid for your phone
Code:
adb shell
cd /data/data/com.android.providers.media/databases
rm *
reboot
or this will ensure no invalid data anymore but will remove fixes for bug #0003
Code:
adb shell
cd /data/
rm -r data
mkdir data
reboot
Post Reference
#0003 - Fix Home Button & Lock Screen
Download sqlite here
First pull the db file first.
Code:
adb pull /data/data/com.android.providers.settings/databases/settings.db settings.db
Then add value to its content
Code:
sqlite3.exe settings.db
sqlite> INSERT INTO "secure" VALUES(67,'device_provisioned','1');
sqlite> .exit
Then push back the db
Code:
adb push settings.db /data/data/com.android.providers.settings/databases/settings.db
Then reboot.
Post Reference
#0004 - Solving installing APK problems
Currently the 2.2 Custom ROM does not support app2sd, and some APK may configure it self to be installed in sdcard.
So we force it to install on internal with code below
Code:
adb shell pm setInstallLocation 1
adb install -l com.rovio.angrybirds.apk
Post Reference
#0005 - Fixing radio, wifi and home screen flashing problem
Run this command
Code:
adb shell killall servicemanager
Post Reference
#0006 - Fixing SU access for Titanium Backup
Run this command
Code:
adb shell chmod 4755 /system/bin/su
Post Reference
#0007 - Fixing SD card mount command to show unicode letters
Modify your chargemon file so its enables utf8 for non ascii letter.
You need to do this on 2.1 ROM, not 2.2 ROM. The file is located in /system/bin
look for this
Code:
mount -t vfat -o rw,noatime,nodiratime /dev/block/mmcblk0p1 /sd
and change into this
Code:
mount -t vfat -o rw,noatime,nodiratime,utf8 /dev/block/mmcblk0p1 /sd
Notes:
You must use a Unix/Linux format capable text editor for this. Notepad will not work.
You can try ultraedit for it.
Post Reference
#0008 - Fix Facebook Sync
Download the ContactsProvider.apk here, then install to your Android using push command
Code:
adb push ContactsProvider.apk /system/app/ContactsProvider.apk
adb reboot
Post Reference
#0009 - Using SetCPU
By default is Performance, fast but wasting too much battery.
Use SetCPU and set to OnDemand.
Post Reference
2.2 Custom ROM FAQ
How and what happened if upgrade from 0.0.1 to 0.0.2?
Just copy data.img and system.img replacing your current one in FreeX10 folder.
This will replace all your 0.0.1 data, be sure to back up first with Titanium Backup
WiFi is running and connected, but cannot browser
This problem seems to be occurring on selected few.. You can set static IP to your android.
Go to Settings -> Wireless ... -> WiFi, then press menu button. From there you can se static IP
Is there a possibility of Timescape and Mediascape for 2.2 Custom ROM
The answer is yes, its possible.
I managed to install Mediascape.apk into 2.2 Custom ROM, but cannot run.
The reason it cannot run is because UX is using a lot of things in Framework-res.apk, images, layout, styles, and etc which cannot be copied directly from SE 2.1 into 2.2 AOSP. It requires someone to properly put all values, resolving conflicts inside Framework-res.apk before the UX can run, which will take months or at least weeks if someone dedicated his or her day job for it. Then after that we still need to deal with external files. So in conclusion, while it still possible, i don't think anyone will do it because of the time demanding process.
I want to help devs solving bugs, i found one but i don't know what actually happend.
While usb connected, from command prompt, type
Code:
adb logcat > logcat.txt
This will output a lot of debugging info into logcat.txt file, later if you find bug, you take a look inside the file.
See anything error or info related to the bug, and post here.. When writing the logcat.txt output, but them inside
Code:
brackets.
Do not post everything.. post few lines related to the bugs.
2.2 Custom ROM Testing Tools
Service Menu
WARNING: DO NOT INSTALL THIS UNLESS YOU DO DEVS, END USER DO NOT INSTALL
PURPOSE: MAYBE FOR TESTING DEVICE FEATURE, MIGHT BREAK SYSTEM APPS
Enable SE Service Menu for device testing. For devs only. You need to put adb stuff in the directory for install.bat to run.
Install framework
Code:
adb push permissions /system/etc/permissions
adb push lib /system/framework
adb reboot
Install applications
Code:
adb install app\bootinfo3.apk
adb install app\ServiceMenu2.apk
adb install app\com.laac.launcher.servicemenu.apk
Nice work. THis is handy
As i posted in the Main thread!
I think some of the force closes, (mainly acore and google framework) and the fact that the market crashes, come down to importing a vcard!
I imported vcard, get many force closes, market stops working, I clean install and don't install the vcard. Everything functions fine.
I do believe this is the reason!
Greeet ~~!! but can u tell me the seloution of this proplem :
i was run 2.2 001 ok ? then i back to to SE 2.1 to change old system.img & data.img by the new on FreeX10_alpha-release_0.0.2-UPDATE , ok ? then i reboot my phone into 2.2 , it run but like u make a refresh on computer ! evry 3 second !
thnx
Ahmed radi said:
Greeet ~~!! but can u tell me the seloution of this proplem :
i was run 2.2 001 ok ? then i back to to SE 2.1 to change old system.img & data.img by the new on FreeX10_alpha-release_0.0.2-UPDATE , ok ? then i reboot my phone into 2.2 , it run but like u make a refresh on computer ! evry 3 second !
thnx
Click to expand...
Click to collapse
Please read the main post!
sorry but no one answer me there
Thanks
Thanks for this ,hopefully a post like this is made for the 1st post on 2.1
http://forum.xda-developers.com/showpost.php?p=9134882&postcount=1
awesome thread, very helpful. Hopefully more people will read this rather than constantly posting the same bugs in the main thread.
Ahmed radi said:
sorry but no one answer me there
Click to expand...
Click to collapse
hey ahmed
grb el solution da
#0005 - Fixing radio, wifi and home screen flashing problem
Run this command
Code:
adb shell killall servicemanager
i think en da el 7l
bye
bsthost said:
hey ahmed
grb el solution da
#0005 - Fixing radio, wifi and home screen flashing problem
Run this command
Code:
adb shell killall servicemanager
i think en da el 7l
bye
Click to expand...
Click to collapse
i dont know how to use adb shell is there anythread for newbie user how to use adb ?
angry birds on my x10 is working well....i take it from a previous backup and restrored on 2.2 with mybackup pro
Please post to http://forum.xda-developers.com/showthread.php?t=835308&page=9999 thread instead.
We don't need to create two discussion thread.
i fixed the wifi and flashing problem and i have connected to wifi but i cant access internet or market any it seems i have connected to my modem netwok still cant access to internet any idea how to fix this?
17mayis said:
i fixed the wifi and flashing problem and i have connected to wifi but i cant access internet or market any it seems i have connected to my modem netwok still cant access to internet any idea how to fix this?
Click to expand...
Click to collapse
Code:
setprop ro.kernel.android.ndns 2
setprop net.eth0.dns1 8.8.8.8
setprop net.eth0.dns2 8.8.4.4
New crash this morning : i tried to connect my BT headphone after that i've activated BT => BT has desactivated itself then the phone reboots.
zephyrix said:
Code:
setprop ro.kernel.android.ndns 2
setprop net.eth0.dns1 8.8.8.8
setprop net.eth0.dns2 8.8.4.4
Click to expand...
Click to collapse
i appreciate your answer man if you could tell me how to do this ? through adb shell or something else?
17mayis said:
i dont know how to use adb shell is there anythread for newbie user how to use adb ?
Click to expand...
Click to collapse
Google is your friend!
i have flashPlayer10.1 problem it,s to slow when i play on any website any solution what might be ?
I did a search and have found similar threads. However, people seem to have been intelligent and back up stuff or installed recovery apps before screwing around with their phones. I did not.
I have a Samsung Note3. Kit Kat 4.4.2 installed OTA once I had it up and running. I rooted it. However, the version of Kit-kat has a famous issue in that it would not allow apps to write to the SD card. I found a site with manual instructions to edit the platform.xml to overcome this issue. The site is as below:
winaero.com/blog/unlock-external-sd-card-writing-for-all-apps-in-android-4-4-kitkat/
However, something went awry after rebooting. I could not see anything on my SD card and I was unable to edit the platform.xml. A solution seemed to be to flash the ROM (using ODIN 3.07). I did this and currently have Baseband version N9005XXUENB1 and Build Number KOT49H.N9005XXUENB7
However, the still has lots of issues. I can stick in a password on wifi and connect to the network but it does not actually communicate with the internet. The H with up and down arrows appears for 3g connectivitiy but also does not work. Bluetooth does not work. Youtube has stopped working errors are common. I am unable to install any apps as cannot use play store, etc. I have pictures and mp3s on my SD card but gallery comes up empty as does music app. The only "file explorer" I seem to have is "my files" app. It comes up as empty (although it shows Total storage available for both SD memory and device storage as using 25/32 and 22/29 respectively.
I am guessing that flashing the ROM did not remedy the corrupt platform.xml in the permissions folder. I think the folder path was etc/permission/platform.xml although am not an expert with android. I was hoping someone might be able to give me a solution to fix the issue. Preferably a completely fresh and clean wipe type solution. Although as I am a "newbie" the greater the simplicity of the solution the better.
Apologies for the length of this issue!
T
laconical said:
I did a search and have found similar threads. However, people seem to have been intelligent and back up stuff or installed recovery apps before screwing around with their phones. I did not.
I have a Samsung Note3. Kit Kat 4.4.2 installed OTA once I had it up and running. I rooted it. However, the version of Kit-kat has a famous issue in that it would not allow apps to write to the SD card. I found a site with manual instructions to edit the platform.xml to overcome this issue. The site is as below:
winaero.com/blog/unlock-external-sd-card-writing-for-all-apps-in-android-4-4-kitkat/
However, something went awry after rebooting. I could not see anything on my SD card and I was unable to edit the platform.xml. A solution seemed to be to flash the ROM (using ODIN 3.07). I did this and currently have Baseband version N9005XXUENB1 and Build Number KOT49H.N9005XXUENB7
However, the still has lots of issues. I can stick in a password on wifi and connect to the network but it does not actually communicate with the internet. The H with up and down arrows appears for 3g connectivitiy but also does not work. Bluetooth does not work. Youtube has stopped working errors are common. I am unable to install any apps as cannot use play store, etc. I have pictures and mp3s on my SD card but gallery comes up empty as does music app. The only "file explorer" I seem to have is "my files" app. It comes up as empty (although it shows Total storage available for both SD memory and device storage as using 25/32 and 22/29 respectively.
I am guessing that flashing the ROM did not remedy the corrupt platform.xml in the permissions folder. I think the folder path was etc/permission/platform.xml although am not an expert with android. I was hoping someone might be able to give me a solution to fix the issue. Preferably a completely fresh and clean wipe type solution. Although as I am a "newbie" the greater the simplicity of the solution the better.
Apologies for the length of this issue!
T
Click to expand...
Click to collapse
Sounds like a bit of a pickle. Since you know that Odin is working and the firmware you have at least flashes correctly, I'd consider installing a custom recovery, backing up EFS folder (and the rom too, just in case there is some weird issue with Odin the 2nd time around) , then wipe everything - /system included. This will make your phone not be able to boot up at all because it will wipe the OS off. Then just boot directly to Download and redo the firmware flash. Something else to consider since you do have the international version, is that some of the firmwares you install might be more carrier or region specific, so there might be a better option to install. I know that there is a some slightly newer version that has NC2 in it as I was trying to fix one of these phones the other day that could not register on any network and ran across that build. Do you remember the build number of the software before you started modding?
Hello. Thanks for the reply.
I am going to ask what are probably very obvious questions but I am a little out of my depth.
1) What does installing a custom recovery involve?
2)How would I backup the EFS directory? When I had ES file explorer I would have been able to try and find it. However, as it is I do not know how to find the directory and back it up. I have connected the phone to a windows laptop and it shows up as note3 but there are no folders or files visible in either the phone or on the card.
3) What is the procedure to "wipe everything"?
I think the final part I know how to do with ODIN. Just go to download boot and load and run odin with the ROM.
I got the BTU ROM is that not for the UK? I tried looking up what NC2 was but did not really find anything the explained what it is.
Thanks again and sorry for the ignorance on my side.
Let's put the custom recovery and all that on the back burner for now.
Was your phone unlocked from the factory or did you get it from a carrier? If from a carrier, which, and is it unlocked now or you are still using it with the original carrier? This one is for Vodaphone http://www.sammobile.com/firmwares/3/?download=27401 but if you are unlocked, it should work anyway, I believe.
Thanks to the people for their replies. I managed to solve the issue as below.
As mentioned previously I had flashed using ODIN and BTU version of N9005XXUENB7. The only other thing that was then required was to enter the recovery (I think power + volume up + home and then release power once samsung name appears). I then selected wipe data/factory. A reboot later and everything was solved.
es0tericcha0s said:
Sounds like a bit of a pickle. Since you know that Odin is working and the firmware you have at least flashes correctly, I'd consider installing a custom recovery, backing up EFS folder (and the rom too, just in case there is some weird issue with Odin the 2nd time around) , then wipe everything - /system included. This will make your phone not be able to boot up at all because it will wipe the OS off. Then just boot directly to Download and redo the firmware flash. Something else to consider since you do have the international version, is that some of the firmwares you install might be more carrier or region specific, so there might be a better option to install. I know that there is a some slightly newer version that has NC2 in it as I was trying to fix one of these phones the other day that could not register on any network and ran across that build. Do you remember the build number of the software before you started modding?
Click to expand...
Click to collapse
Hi, The other day i tried to fix the Platform.xml. on my S5. i noticed sometime after that when i move files using the "My files" app, the phone would not refresh the files so that they would show up in gallery, videos etc.. I tried to undo the Media_rw by using SD Maid to find the Platform.xml and Axel to rewrite the Xml. In the platform.xml. i deleted the Media_rw and replaced the old xml with the old (original) one. I rebooted my phone. On swiping to open the screen i noticed alot of apps crashing one after the other. I when back to SD Maid and searched for Platform.xml and opened it with Axel but it said file not found.. i can not use the internet, i cant use most apps, i cant even use the Kies on my computer. I cant save anything to the storage either. I really need help. Odin is the only thing i can use. but i dont know how i can reset the xml files on my phone.. What exactly am i do to?
please
christaph3r said:
Hi, The other day i tried to fix the Platform.xml. on my S5. i noticed sometime after that when i move files using the "My files" app, the phone would not refresh the files so that they would show up in gallery, videos etc.. I tried to undo the Media_rw by using SD Maid to find the Platform.xml and Axel to rewrite the Xml. In the platform.xml. i deleted the Media_rw and replaced the old xml with the old (original) one. I rebooted my phone. On swiping to open the screen i noticed alot of apps crashing one after the other. I when back to SD Maid and searched for Platform.xml and opened it with Axel but it said file not found.. i can not use the internet, i cant use most apps, i cant even use the Kies on my computer. I cant save anything to the storage either. I really need help. Odin is the only thing i can use. but i dont know how i can reset the xml files on my phone.. What exactly am i do to?
please
Click to expand...
Click to collapse
Hey, I was wondering if you ever got a fix on this without factory reset. I am having the exact same issue.
Same boat here. Please someone help!
woahs said:
Hey, I was wondering if you ever got a fix on this without factory reset. I am having the exact same issue.
Click to expand...
Click to collapse
I am having exact same problem. After editing the platform.xml, my Note 3 is behaving the same way: no access to any storage area (including USB drive), no remote access/online access (even though WIFI and 4G appear to connect just fine), most apps fail with 'Unfortunately ... has stopped' error message, no Google Play...
I really don't want to do a factory reset, but really, does it even help? Is there a way to put the platform.xml back? Is there a way to access the phone via USB cable?
vbcomer said:
I am having exact same problem. After editing the platform.xml, my Note 3 is behaving the same way: no access to any storage area (including USB drive), no remote access/online access (even though WIFI and 4G appear to connect just fine), most apps fail with 'Unfortunately ... has stopped' error message, no Google Play...
I really don't want to do a factory reset, but really, does it even help? Is there a way to put the platform.xml back? Is there a way to access the phone via USB cable?
Click to expand...
Click to collapse
Update: I went ahead and successfully install the all-in-one file to the phone via Odin, but it still has the same issues. Can someone give a hint? thanks
FIX!!!
Hi I'm a god at searching(hence the Go)but an Noob(hence the obie) to Dev on Android but a computer techy(in other words I fix computers upgrade ETC.) Now if you followed EXACT instructions you SHOULD have the Backup copy of platform.xml. If not reply and I'll give those instructions.
So I did the same as this post did to get my issue as well but there's a SOLUTION I just found W/o getting rid of your loved files and its easy!
1. Download the ADB also included in The Android SDK by Google (approx. 3XX MB)
2. DOWNLOAD Root Explorer.APK
3. Extract ADB Dev kit( name should be roughly adt-bundle-windows-x86_64-20140702.zip)Note: I prefered it at C:\Android it avoided Name too long error
4. Open CMD Type: cd C:\<location ADB was extracted>\sdk\platform-tools(if you followed my note it will be "C:\Android\adt-bundle-windows-x86_64-20140702\sdk\platform-tools") and press enter... HINT TO COPY PASTE IN CMD RIGHT CLICK SAVES TIME!!!!
5. Install Root Explorer so you can backup your files(if any) I was unlucky having none on the phone but SD storage is ok!
To do this type ADB INSTALL <Location of Root explorer.exe> For standard windows users with default download locations it would be "C:\Users\<USER NAME>\Downloads\Root Explorer v3.1.9.apk" <COPY PASTE
6. Copy the original back to System>ETC>Permissions and overwrite
7. Factory reset!
Links?
sorry guys bt i have the same note 3 and i delete the platform.xml file .....i did a factory reset bt nothing happened ...can u help plz
Re:FIX!
But you have to set the permissions of platform.xml as 0777.Right?
Step 5 how should it works
Android Goobie said:
Hi I'm a god at searching(hence the Go)but an Noob(hence the obie) to Dev on Android but a computer techy(in other words I fix computers upgrade ETC.) Now if you followed EXACT instructions you SHOULD have the Backup copy of platform.xml. If not reply and I'll give those instructions.
So I did the same as this post did to get my issue as well but there's a SOLUTION I just found W/o getting rid of your loved files and its easy!
1. Download the ADB also included in The Android SDK by Google (approx. 3XX MB)
2. DOWNLOAD Root Explorer.APK
3. Extract ADB Dev kit( name should be roughly adt-bundle-windows-x86_64-20140702.zip)Note: I prefered it at C:\Android it avoided Name too long error
4. Open CMD Type: cd C:\<location ADB was extracted>\sdk\platform-tools(if you followed my note it will be "C:\Android\adt-bundle-windows-x86_64-20140702\sdk\platform-tools") and press enter... HINT TO COPY PASTE IN CMD RIGHT CLICK SAVES TIME!!!!
5. Install Root Explorer so you can backup your files(if any) I was unlucky having none on the phone but SD storage is ok!
To do this type ADB INSTALL <Location of Root explorer.exe> For standard windows users with default download locations it would be "C:\Users\<USER NAME>\Downloads\Root Explorer v3.1.9.apk" <COPY PASTE
6. Copy the original back to System>ETC>Permissions and overwrite
7. Factory reset!
Links?
Click to expand...
Click to collapse
Hi have next message in the install root step could you help me please
Android Debug Bridge version 1.0.31
-a - directs adb to listen on all interfaces for a connection
-d - directs command to the only connected USB device
returns an error if more than one USB device is present.
-e - directs command to the only running emulator.
returns an error if more than one emulator is r
unning.
-s <specific device> - directs command to the device or emulator with
the given
serial number or qualifier. Overrides ANDROID_SERIAL
environment variable.
-p <product name or path> - simple product name like 'sooner', or
a relative/absolute path to a product
out directory like 'out/target/product/sooner'.
If -p is not specified, the ANDROID_PRODUCT_OUT
environment variable is used, which must
be an absolute path.
-H - Name of adb server host (default: localhost)
-P - Port of adb server (default: 5037)
devices [-l] - list all connected devices
('-l' will also list device qualifiers)
connect <host>[:<port>] - connect to a device via TCP/IP
Port 5555 is used by default if no port number
is specified.
disconnect [<host>[:<port>]] - disconnect from a TCP/IP device.
Port 5555 is used by default if no port number
is specified.
Using this command with no additional arguments
will disconnect from all connected TCP/IP devices.
device commands:
adb push [-p] <local> <remote>
- copy file/dir to device
('-p' to display the transfer progress)
adb pull [-p] [-a] <remote> [<local>]
- copy file/dir from device
('-p' to display the transfer progress)
('-a' means copy timestamp and mode) adb sync [ <directory> ] - copy host->device only if changed
(-l means list but don't copy)
(see 'adb help all')
adb shell - run remote shell interactively
adb shell <command> - run remote shell command
adb emu <command> - run emulator console command
adb logcat [ <filter-spec> ] - View device log
adb forward --list - list all forward socket connections.
the format is a list of lines with the followin
g format:
<serial> " " <local> " " <remote> "\n" adb forward <local> <remote> - forward socket connections
forward specs are one of:
tcp:<port>
localabstract:<unix domain socket name>
localreserved:<unix domain socket name>
localfilesystem:<unix domain socket name>
dev:<character device name>
jdwp:<process pid> (remote only) adb forward --no-rebind <local> <remote>
- same as 'adb forward <local> <remote>' but fails
if <local> is already forwarded
adb forward --remove <local> - remove a specific forward socket connection
adb forward --remove-all - remove all forward socket connections
adb jdwp - list PIDs of processes hosting a JDWP transport
adb install [-l] [-r] [-d] [-s] [--algo <algorithm name> --key <hex-encoded ke
y> --iv <hex-encoded iv>] <file>
- push this package file to the device and install it
('-l' means forward-lock the app)
('-r' means reinstall the app, keeping its data)
('-d' means allow version code downgrade)
('-s' means install on SD card instead of inter
nal storage)
('--algo', '--key', and '--iv' mean the file is
encrypted already)
adb uninstall [-k] <package> - remove this app package from the device
('-k' means keep the data and cache directories)
adb bugreport - return all information from the device
that should be included in a bug report.
adb backup [-f <file>] [-apk|-noapk] [-obb|-noobb] [-shared|-noshared] [-all]
[-system|-nosystem] [<packages...>]
- write an archive of the device's data to <file>
.
If no -f option is supplied then the data is written
to "backup.ab" in the current directory.
(-apk|-noapk enable/disable backup of the .apks themselves
in the archive; the default is noapk.)
(-obb|-noobb enable/disable backup of any installed apk expansion
(aka .obb) files associated with each application; the default is noobb.)
(-shared|-noshared enable/disable backup of the device's
shared storage / SD card contents; the default is noshared.)
(-all means to back up all installed applications)
(-system|-nosystem toggles whether -all automatically includes
system applications; the default is to include system apps)
(<packages...> is the list of applications to be backed up. If
the -all or -shared flags are passed, then the package
list is optional. Applications explicitly given on the
command line will be included even if -nosystem would
ordinarily cause them to be omitted.) adb restore <file> - restore device contents from the <file> backup
archive
adb help - show this help message
adb version - show version num
scripting:
adb wait-for-device - block until device is online
adb start-server - ensure that there is a server running
adb kill-server - kill the server if it is running
adb get-state - prints: offline | bootloader | device
adb get-serialno - prints: <serial-number>
adb get-devpath - prints: <device-path>
adb status-window - continuously print device status for a specifie
d device
adb remount - remounts the /system partition on the device re
ad-write
adb reboot [bootloader|recovery] - reboots the device, optionally into the boo
tloader or recovery program
adb reboot-bootloader - reboots the device into the bootloader
adb root - restarts the adbd daemon with root permissions
adb usb - restarts the adbd daemon listening on USB
adb tcpip <port> - restarts the adbd daemon listening on TCP on the specified port
networking:
adb ppp <tty> [parameters] - Run PPP over USB.
Note: you should not automatically start a PPP connection.
<tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1 [parameters] - Eg. defaultroute debug dump local notty usepeerdns
adb sync notes: adb sync [ <directory> ]
<localdir> can be interpreted in several ways:
- If <directory> is not specified, both /system and /data partitions will be updated.
- If it is "system" or "data", only the corresponding partition is updated.
environmental variables:
ADB_TRACE - Print debug information. A comma separated list of the following values
1 or all, adb, sockets, packets, rwx, usb, sync, sysdeps, transport, jdwp
ANDROID_SERIAL - The serial number to connect to. -s takes priority over this if given.
ANDROID_LOG_TAGS - When used with the logcat option, only these debug tags are printed.
I really want to switch to WOS 2.0, but the one thing preventing me from doing so is that the voice prompt (when running with bluetooth headphones), would be in chinese.
I know that pacefied has english voice prompts (or had, as I believe it's not working in the most recent versions)
So my question is: is it a simple case of copying over some english voice files to the watch?
Could I install WOS 2.0 and then after installation copy the english files ?
I did replace the chinese voiceprompts with the english ones in the NewWearSport.apk, installed the rooted spanished version from here:
https://www.htcmania.com/showthread.php?t=1412777
and replaced the NewWearSport.apk via adb.
Everything installed well and is working well but I don't hear any voiceprompts. Since I don't have that much outdoor activities now due to an injury I couldn't check, why the voiceprompts are not working. I guess it is better to wait for Saratoga79 to have it done.
nhedgehog said:
I did replace the chinese voiceprompts with the english ones in the NewWearSport.apk, installed the rooted spanished version from here:
https://www.htcmania.com/showthread.php?t=1412777
and replaced the NewWearSport.apk via adb.
Everything installed well and is working well but I don't hear any voiceprompts. Since I don't have that much outdoor activities now due to an injury I couldn't check, why the voiceprompts are not working. I guess it is better to wait for Saratoga79 to have it done.
Click to expand...
Click to collapse
You mean you couldn't hear the voice prompts when your bluetooth headphones were connected? Could you hear chinese voice prompts instead?
I realise that Saratoga could probably solve this problem fairly easily (that guy really seems to know what he's doing), but I don't want to keep asking him cos I realise he's busy.
I feel like it must be just a case of replacing files in the file system. Or is it not that simple?
Voiceprompts are in the NewWearSport.apk integrated. I replaced the Chinese ones with the English ones. I didn't check the Chinese ones before. You have to open the apk files to do so. For this you can use several tools. Since my manipulated apk did install properly I guess it is save to assume, that I did it allright.
nhedgehog said:
Voiceprompts are in the NewWearSport.apk integrated. I replaced the Chinese ones with the English ones. I didn't check the Chinese ones before. You have to open the apk files to do so. For this you can use several tools. Since my manipulated apk did install properly I guess it is save to assume, that I did it allright.
Click to expand...
Click to collapse
I see. My assumption was as follows:
When you install an apk, the files are unzipped to the android file system somewhere (e.g. a newwearsport/voiceprompt folder or something). I thought that (without installing a new apk) you could just copy english files directly to the folder. Perhaps there is some technical reason why this isn't possible. I know very little about this stuff.
The version of the voice files in EN is missing some phrases in the new sport app, but the version in Spanish seems to be complete. I will do some tests today, trying to use ES+EN, so no words in CN...
le_lutin said:
When you install an apk, the files are unzipped to the android file system somewhere (e.g. a newwearsport/voiceprompt folder or something). I thought that (without installing a new apk) you could just copy english files directly to the folder.
Click to expand...
Click to collapse
I just had a look on the watch to be on the safe side.
This quoted assumption is wrong. The only trace of the NewWearSport.apk I found was under:
\system\app\NewWearSport\NewWearSport.apk.
Where is a Subfolder mips which contains the actual code as odex file which I didn't touch.
We have some traces in the data folder :
\data\data\com.huami.watch.newsport
but not the voicefiles. So in my opinion the only way to get to this files is via replacing them in the NewWearSport.apk and installing the new version of this apk.
.
nhedgehog said:
I just had a look on the watch to be on the safe side.
This quoted assumption is wrong. The only trace of the NewWearSport.apk I found was under:
\system\app\NewWearSport\NewWearSport.apk.
Where is a Subfolder mips which contains the actual code as odex file which I didn't touch.
We have some traces in the data folder :
\data\data\com.huami.watch.newsport
but not the voicefiles. So in my opinion the only way to get to this files is via replacing them in the NewWearSport.apk and installing the new version of this apk.
.
Click to expand...
Click to collapse
Thanks man - you know this stuff better than I do!
lfom said:
The version of the voice files in EN is missing some phrases in the new sport app, but the version in Spanish seems to be complete. I will do some tests today, trying to use ES+EN, so no words in CN...
Click to expand...
Click to collapse
Sounds good!
I just did a quick and dirty replace of the voices with ES + EN, still a few phrases in CN but I think that all of them are used only for VO2max which is deactivated on Pace.
DISCLAIMER
** Although I have tested the procedure, if you do it then you do on your own risk. I am not responsible for any errors or damaged caused. **
Requires: WOS 2.0.6.12 set to "en" + adb + root, code is for macOS/Linux, probably on Windows it will work if you use "adb.exe" instead of "adb" (untested), apk file must be in current directory.
Code:
adb root
adb remount
adb shell mv /system/app/NewWearSport/NewWearSport.apk /system/app/NewWearSport/NewWearSport.apk_OLD
adb push NewWearSport.apk /system/app/NewWearSport/
adb shell chmod 0644 /system/app/NewWearSport/NewWearSport.apk
adb remount
adb reboot
To revert:
Code:
adb root
adb remount
adb shell rm /system/app/NewWearSport/NewWearSport.apk
adb shell mv /system/app/NewWearSport/NewWearSport.apk_OLD /system/app/NewWearSport/NewWearSport.apk
adb remount
adb reboot
EDIT: attached file removed, please see other post in this thread with all EN version and scripts to install/uninstall.
lfom said:
I just did a quick and dirty replace of the voices with ES + EN, still a few phrases in CN but I think that all of them are used only for VO2max which is deactivated on Pace.
DISCLAIMER
** Although I have tested the procedure, if you do it then you do on your own risk. I am not responsible for any errors or damaged caused. **
Requires: WOS 2.0.6.12 set to "en" + adb + root, code is for macOS/Linux, probably on Windows it will work if you use "adb.exe" instead of "adb" (untested), apk file must be in current directory.
Code:
adb root
adb remount
adb shell mv /system/app/NewWearSport/NewWearSport.apk /system/app/NewWearSport/NewWearSport.apk_OLD
adb push NewWearSport.apk /system/app/NewWearSport/
adb shell chmod 0644 /system/app/NewWearSport/NewWearSport.apk
adb remount
adb reboot
To revert:
Code:
adb root
adb remount
adb shell rm /system/app/NewWearSport/NewWearSport.apk
adb shell mv /system/app/NewWearSport/NewWearSport.apk_OLD /system/app/NewWearSport/NewWearSport.apk
adb remount
adb reboot
Click to expand...
Click to collapse
You're a legend! Will try this out as soon as I get a chance.
Thanks!
le_lutin said:
You're a legend! Will try this out as soon as I get a chance.
Thanks!
Click to expand...
Click to collapse
Please test the attached file, all voices in EN high quality, with scripts to install/remove for macOS, Linux and Win. I haven't tested the BAT scripts, if someone test them, please report back. Thanks.
DISCLAIMER
** Although I have tested the procedure, if you do it then you do on your own risk. I am not responsible for any errors or damaged caused. **
Requires: WOS 2.0.6.12 set to "en" + adb + root (permanent or use temporary)
- Unpack file
- Open command line and change directory to the contents of the file
- To install run "sh install_en_voices.sh" for macOS/Linux or "install_en_voices.bat" for Windows
- To uninstall run "sh remove_en_voices.sh" for macOS/Linux or "remove_en_voices.bat" for Windows
When reboot, watch will re-optimise all app, it's normal, simply wait. No data will be affected.
lfom said:
Please test the attached file, all voices in EN high quality, with scripts to install/remove for macOS, Linux and Win. I haven't tested the BAT scripts, if someone test them, please report back. Thanks.
DISCLAIMER
** Although I have tested the procedure, if you do it then you do on your own risk. I am not responsible for any errors or damaged caused. **
Requires: WOS 2.0.6.12 set to "en" + adb + root (permanent or use temporary)
- Unpack file
- Open command line and change directory to the contents of the file
- To install run "sh install_en_voices.sh" for macOS/Linux or "install_en_voices.bat" for Windows
- To uninstall run "sh remove_en_voices.sh" for macOS/Linux or "remove_en_voices.bat" for Windows
When reboot, watch will re-optimise all app, it's normal, simply wait. No data will be affected.
Click to expand...
Click to collapse
Nice work, will add this to next WOS ROM.
Btw, note that I had some problems with voices using different bitrate, frecuency or channel number comparing to stock CN voices. I face several Bluetooth issues due to this, even bluetooth disconnections, so be advised.
Saratoga79 said:
Nice work, will add this to next WOS ROM.
Btw, note that I had some problems with voices using different bitrate, frecuency or channel number comparing to stock CN voices. I face several Bluetooth issues due to this, even bluetooth disconnections, so be advised.
Click to expand...
Click to collapse
Thanks. And thank you for all the work you've done for the Amazfit community as well. No problems with my testings yesterday, I did a walk and also indoor running for testing. But this was the initial version, a quick build for testing purposes. Many of phrases can be improved, maybe it's better to wait until it's finished.
Regards
I tried it today while running. I got no voicealerts.
Settings:
Bluetooth headset connected but no musicplayer started (music playing is working with bluetooth headset [verified]).
Run - Settings - Training target (not set)
- Alerts - Lap Alert - on
- HR Alert - above 170
- HR Zone - off
- Auto Lap Alert - on
- Pace Alert - off
more settings - Voice prompt - on
- Auto Pause - off
- Auto Lap - off
- Realtime Stats - Heartrate
- Data Screen - 6fields
- 3D Data - on
- BG Color - white
nhedgehog said:
I tried it today while running. I got no voicealerts.
Click to expand...
Click to collapse
I have tested with walk and indoor run and it worked with me, enabled most voice alerts and I could hear warning on pace, heartrate and distance. If you don't connect the headphones in the Accessories part of the activity settings, then try to start playing a music before you start the activity and then pause it using the headset to make sure it's activated.
nhedgehog said:
I tried it today while running. I got no voicealerts.
Settings:
Bluetooth headset connected but no musicplayer started (music playing is working with bluetooth headset [verified]).
Run - Settings - Training target (not set)
- Alerts - Lap Alert - on
- HR Alert - above 170
- HR Zone - off
- Auto Lap Alert - on
- Pace Alert - off
more settings - Voice prompt - on
- Auto Pause - off
- Auto Lap - off
- Realtime Stats - Heartrate
- Data Screen - 6fields
- 3D Data - on
- BG Color - white
Click to expand...
Click to collapse
Try with music, if there is a problem with voice files music will stop playing
Thanks for the support.
Headphones were connected and playing music fine before.
I think I have an idea whats wrong.
1) I run with airplane mode on but bluetooth activated. (PaceON)
2) I did not use the settings accessories to connect with the headphones but did it before with music.
3) Auto Lap - off
Have test this theorie further.
Saratoga79 said:
Nice work, will add this to next WOS ROM.
Btw, note that I had some problems with voices using different bitrate, frecuency or channel number comparing to stock CN voices. I face several Bluetooth issues due to this, even bluetooth disconnections, so be advised.
Click to expand...
Click to collapse
NewWearSport concatenates all the mp3 files needed to form the phrase in a temporary mp3 file.... these means that all mp3 files need to be same bitrate and with no headers (xing, id3, VBRI or another tags at the start or end of the file)
I wasn't paying attention to what I was doing after updating some apps, and froze some some application that is necessary, now my CATS60 will not boot. The app likely just uses the disable or hide command, but I am not sure what I misclicked, so I need to get a list or currently disabled apps or reenable all apps. I entered TWRP recovery, mounted all partitions, and connected through ADB shell.
This is what I get when I try to find out what's enabled/disabled:
Code:
# pm list packages
CANNOT LINK EXECUTABLE: library "libqc-opt.so" not found
page record for 0x7fb1658010 was not found (block_size=64)
adbd is running as root, and the file does exist:
Code:
~ # find / -name 'libqc-opt.so'
/system/vendor/lib/libqc-opt.so
/system/vendor/lib64/libqc-opt.so
I am using TWRP as recovery, and recovering system, data, and boot from backup does not fix this.
Does anyone know either
How can I make pm command work from recovery?
Where is the list of disabled apps stored, so I can manually edit it?
Thank you.
I found the list as used by the app (com.ramdroid.appquarantine), and it appears I blocked Google Calendar. However I have not found any way to "unfreeze" the app through recovery, this is simply a tracking file the app uses, not the actual enable/disable for Google Calendar.
Setting PATH and LD_LIBRARY_PATH environment variables does not help. Running it from inside the folder containing libqc-opt.so causes it to fail on a different external link.
Copying it to a second file called pm2, opening in vi and adding exports gets me as far as:
Code:
CANNOT LINK EXECUTABLE: cannot locate symbol "__android_log_close" referenced by "/system/lib64/libandroid_runtime.so"
Is it possible to chroot inside adb, and what do I need to mount first in order to do so? I don't know enough about Android to know which parts of the system I actually need.
I have a small local network:
• A router not connected to the Internet
• 20 tablets that connect to it
• a computer under linux with LAMP
• a computer under windows with WAMP
When I want to install new apps on the tablets, I have to plug them one by one into a computer and run ADB commands. Would it be possible to execute these commands over WiFi? All tablets are rooted and the network is secure because there is no internet access. So I wouldn't be afraid to use security holes to carry out adb commands over WiFi.
Example of remarkable ADB commands:
• Place files on the tablet: adb push C:/APPLICATIONS/TitaniumBackup/ /sdcard/
• Install several applications: for %f in (C:\ APPLICATIONS\*.Apk) do adb install -t -g -r "%f"
• Start an application: adb shell am start -n com.package.name/com.package.name.ActivityName
•take photos
• activate or deactivate wifi
• Re-boot the tablet: adb reboot
• etc.
I would like to be able to do this on all 20 tablets via the wifi network rather than plugging them one by one into my computer.
Thank you in advance for any ideas you can share with me.
Michael5713 said:
I have a small local network:
• A router not connected to the Internet
• 20 tablets that connect to it
• a computer under linux with LAMP
• a computer under windows with WAMP
When I want to install new apps on the tablets, I have to plug them one by one into a computer and run ADB commands. Would it be possible to execute these commands over WiFi? All tablets are rooted and the network is secure because there is no internet access. So I wouldn't be afraid to use security holes to carry out adb commands over WiFi.
Click to expand...
Click to collapse
Keyword: Wireless ADB. See also here.
Michael5713 said:
I have a small local network:
• A router not connected to the Internet
• 20 tablets that connect to it
• a computer under linux with LAMP
• a computer under windows with WAMP
When I want to install new apps on the tablets, I have to plug them one by one into a computer and run ADB commands. Would it be possible to execute these commands over WiFi? All tablets are rooted and the network is secure because there is no internet access. So I wouldn't be afraid to use security holes to carry out adb commands over WiFi.
Example of remarkable ADB commands:
• Place files on the tablet: adb push C:/APPLICATIONS/TitaniumBackup/ /sdcard/
• Install several applications: for %f in (C:\ APPLICATIONS\*.Apk) do adb install -t -g -r "%f"
• Start an application: adb shell am start -n com.package.name/com.package.name.ActivityName
•take photos
• activate or deactivate wifi
• Re-boot the tablet: adb reboot
• etc.
I would like to be able to do this on all 20 tablets via the wifi network rather than plugging them one by one into my computer.
Thank you in advance for any ideas you can share with me.
Click to expand...
Click to collapse
Yes, android supports ADB over WiFi.
Do a google search for:
"ADB over Wifi"
Sent from my SM-S767VL using Tapatalk
Yes, indeed, the answer was easily found on the web. I asked it because that day I split one big issue into several smaller ones to post requests on your forum. And I never imagined it would be so easy to connect 20 tablets to each other using a local wifi network and adb. The app jwoegerbauer recommended to me is just wonderful. Now I can:
- simultaneously install an application on the 20 tablets from my PC:
FOR /F "skip=1" %x IN ('adb devices') DO start adb -s %x install -r "my-apk.apk"
- uninstall an application on the 20 tablets
- place folders or files I want where I want on all the tablets (they are rooted):
FOR /F "skip=1" %x IN ('adb devices') DO start adb -s %x push C:/my-file/ /sdcard/
- take a file from each tablet or delete it
- even take a screenshot of the tablet I want:
adb -s 192.168.43.122:5555 shell screencap /sdcard/testadb/screen.png
or 20 tablets:
FOR /F "skip=1" %x IN ('adb devices') DO start adb -s %x shell screencap /sdcard/testadb/screen.png
Many thanks to jwoegerbauer for recommending the Wireless ADB application to me.
However, I would like to explore the matter further. The problem I'm looking to solve is to manage a group of tablets without internet and without having to pay an MDM (Android mobile device manager). With ADB, I can install and uninstall applications and send or receive files. Here is what remains to be done:
- I am learning how to remotely change the settings of my 20 tablets. Imagine how tedious it is to turn on the wifi on each of the tablets, then select a network and enter the password. Sometimes I need to turn off wifi or change networks on all tablets. I also have to change the default display or font size. Last week, I've had to set the time and time zone on each one because "network provided time" does not work in a local area network not connected to the Internet. I will tell you which adb formulas I have tested if anyone is interested.
- I also started an other thread on xda-developers: Remotely modify the settings of an android application. Indeed, it takes a plenty of time to manually change the preferences and datas of an application already installed on 20 tablets. If you have any ideas on this, I'd be happy to read your ideas on the forum.
AFAIK USB hubs with 20 ports exist