Hello
Can someone tell me the exact type of USB connector is on the Samsung Galaxy View. Then manual only says
it's a USB connector V2.
I've ordered the device but have not received it yet. But trying to determine if the connector is USB v2 or micro USB connector?
Want to plug in an ethernet adapter.
Thanks in advance
JRS
The port is micro-USB (not to be confused with mini-USB). Although most stores don't mention it, most reviews do. The Gizmodo review even has a close-up picture: https://gizmodo.com/samsung-galaxy-view-review-i-love-this-magical-slab-of-1740835366
i would recommend grabbing a micro usb "cable" OTA adapter - you can utilize it for all usb storage, upgrades, etc, etc.... they make a hard snap in adapter but use caution on them as for as easy as they snap in , they also snap out breaking your port with it. The cable adapters are way more flexible and with the tablet being so large in the first place it really doesn't make a difference if it's dangling on the side.
Related
Can EEE PAD Transformer support Full USB HOST functionality using stock connector provided by ASUS using something like below FEMALE TO FEMALE USB Adaptor ?
http://www.hkcolordigital.com/usb-2.0-a-female-to-usb-2.0-a-female-adapter.html
I know ASUS dock keyboard do have USB port and also, ASUS is selling USB adaptor for around $45, but I do not want to spend that much.
Since ASUS stock connector which is used for charging as well as data transfer from PC support USB functionality, I believe it should be easy to implement.
Any suggestion/solution ?
Thanks
No, it wouldn't work.
http://www.androidtablets.net/forum/asus-tablets/17308-usb-useful-transformer.html
I can't find pinout for ASUS charging connector, but i think it has USB-host pins in it - so you should just solder an USB-female to them in right order.
UPD:
http://www.alwaysinnovating.com/wiki/index.php/40-pin_connector
http://forum.xda-developers.com/archive/index.php/t-1056615.html
this might work. USB OTG is what we looking for
USB Adapter Coupler Type A Female to Female
I have ordered "USB Adapter Coupler Type A Female to Female" from ebay ($3 including shipping):
http://www.ebay.in/itm/120868617077?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649#ht_932wt_1143
Once it reaches to me, I'll try what is possible with it.
I received the "USB Adapter Coupler Type A Female to Female" today and tried to connect USB pen drive and as it was expected, NOTHING HAPPENED.
But, I still think it is possible. I have seen Nexus and Galaxy phones with USB host online.
I think, to be precise, it is not only Female to Female adaptor to be connected to stock connector, but it needs some power (+5v) as well. For this, I think it need USB Y Connector, as in attachment. Below is the link for reference:
http://htc-linux.org/wiki/index.php?title=Msm_Usb_Host
Now, I am thinking to open Female to Female USB connector and solder 2-wire with USB Male connector to it (I have extra USB mouse) for power (+5V & Ground) and try again.
look at last link in my previous reply. There are photos of disassembled host adapter and some schematics-pinouts. TF has USBhost, but it on different pins than usb-slave cable.
I have a MHL Adapter and I get video just fine. Now I want to be able to sit on my couch while i use the adapter. Seems to me the simplest way would be to use a 15-20 foot Micro USB Male - Micro USB Female extension cable.
Does anyone have any experience with such a setup? Do you have a recommendation for such a cable?
TIA!!
Why micro USB? You can get a HDMI cable as long as you might want (Monoprice is particularly good). If it's not enough you can carry a HDMI signal over a single or (simpler to find) two CAT5 cables w/ RJ45 jacks for hundreds of feet.
I guess the thought was that if I have the Micro USB Extension, then it's one thin lightweight wire that has to travel across the floor.
If I did HDMI, I'd still have to be near power whereas with Micro USB, I could set the power adapter, and HDMI, and MHL Adapter all together and then have a thin and lightweight wire traveling across the floor.
But if it's not possible, (micro USB limitiation??) then HDMI it would have to be.
bean1975 said:
Why micro USB? You can get a HDMI cable as long as you might want (Monoprice is particularly good). If it's not enough you can carry a HDMI signal over a single or (simpler to find) two CAT5 cables w/ RJ45 jacks for hundreds of feet.
Click to expand...
Click to collapse
If the micro USB works it would be much cheaper than a comparable length hdmi cord.
Sent from my SAMSUNG-SGH-I717 using Tapatalk
I would test http://www.amazon.com/Extender-over-CAT5E-CAT6-connection/dp/B003L14ZTC this. It's hard to get cheaper than cat5e.
Just bought 10 feet on amazon! Lovely!
Sent from my SAMSUNG-SGH-I717 using Tapatalk
I wanted to do exactly this - extend the cable but at the micro-USB end to avoid having the Micro-usb power supply line and the bulky MHL adaptor all where the phone is - much cleaner to just have a thin cable coming out of the phone and headed towards the TV.
I did get hold of a micro-USB extension cable (2m/6ft) but unfortunately it does not work. Directly plugging the phone into the MHL adaptor works perfectly, as soon as I insert the micro-USB extension it doesn't work. I need to have a closer look to check the pins are populated etc, but not sure why this would be an issue - don't think it can be signal strength and if all the pins are populated I don't see why the adaptor would care.????
Any thoughts?
Micro B USB extension not working
I, too have been trying to figure out why an extension cable doesn't work the way you think it might. Today, I tried cutting my 6 foot cable, first making sure I had the right power leads working. Then I went through all the possible combinations of connections to see if one would work. None do. I'm at a complete loss on this wondering what I should try next.
Thanks for info....similarly baffled but at least you have ruled out something!
Like the other guy said, get your x for of hdmi cable, then just plug your AC charger in where you are. Mhl might use additional connectors/pins/whatever vs micro USB. Or you can go totally wireless and use a Bluetooth mouse and keyboard.
Also I remember I had a charging issue with an extension. Sometimes one product works better than others. I can't charge my phone with my 20 dollar AC charger from best buy since the ICS leak. It's weird. Hdmi cables are pretty uniform, I would just extend that.
Sent from my SAMSUNG-SGH-I717 using XDA
Yes, that works, always has, but that's not the point. Would rather have just one long cable connected to the phone in front of the TV rather than three cables, the device and the phone in a kludge setup.
A partial answer
This allows connecting 6 feet away with a thin, flexible single cable..Also cheap, but shipping takes 15 days.
goo.gl/NzCik
Gavdroid said:
I did get hold of a micro-USB extension cable (2m/6ft) but unfortunately it does not work. Directly plugging the phone into the MHL adaptor works perfectly, as soon as I insert the micro-USB extension it doesn't work. I need to have a closer look to check the pins are populated etc, but not sure why this would be an issue - don't think it can be signal strength and if all the pins are populated I don't see why the adaptor would care.????
Any thoughts?
Click to expand...
Click to collapse
I took apart the two cables and the USB has four wires while the MHL cable has ten.
are the mhl wires easily extendable themselves by splicing? I'm thinking strip out a few usb cables and use the wires? Or just go purchase some extremely thin gauge wire (22 gauge) and make it yourself?
Micro B USB extension not working
The Micro B USB connector only has 5 connections, so there is no way you can connect 10 from the MHL cable to it, so something else is going on.
pinoutsguide.com/PortableDevices/micro_usb_pinout.shtml
amblix said:
are the mhl wires easily extendable themselves by splicing? I'm thinking strip out a few usb cables and use the wires? Or just go purchase some extremely thin gauge wire (22 gauge) and make it yourself?
Click to expand...
Click to collapse
I bought splices and thought about extending the cable. It's possible.
galaxy s3
I did wanted to do the same but the extension cable didn't work. I looked at the connecting points and felt that the micro usb from Mel adaptor is to bit longer than usual so I thought that may be the reason and I shorten it resulting damaging my Mel adaptor itself. Now I am going for allshare cast wireless hub. So everyone please don't try to cut the micro usb pin from your adaptor or u will better decide to for my option to for complete flexibility.
I want to do this EXACT same thing but slightly more extreme:
I want an MHL adapter with 10-25 feet of micro USB cable on the end so I can use it from anywhere in my living room.
Is there any such cable/adapter?
Why do all MHL adapters come with only a 5 inch cable??? It is maddening!
*bump* I am looking for this too.. but I have a reason slightly different.. I have an AppRadio in my car that I connect my phone to. The MHL cable end is rather bulky and does not fit into the opening of my otterbox that is on my phone... most microUSB wires fit into the opening just fine.. Taking my phone out of the case every time I am in the car is rather ridiculous so I bought the micro USB extension (bought a 6" one).. didn;t even register except to charge... So, and ideas would be greatly appreciated..
Teej53214 said:
*bump* I am looking for this too.. but I have a reason slightly different.. I have an AppRadio in my car that I connect my phone to. The MHL cable end is rather bulky and does not fit into the opening of my otterbox that is on my phone... most microUSB wires fit into the opening just fine.. Taking my phone out of the case every time I am in the car is rather ridiculous so I bought the micro USB extension (bought a 6" one).. didn;t even register except to charge... So, and ideas would be greatly appreciated..
Click to expand...
Click to collapse
Get a different MHL adapter. I use an adapter close to the one 7 posts up by hedaleth with my kenwood system in my truck.
Has anyone made an OTG cable for the TFP? I don't like the chunky USB OTG connector and thought an OTG cable would be much better.
Not quite sure what you mean.
The only proper usb connector is a standard type A connector located on the keyboard, it has insufficient pins to implement OTG. The only other usb connectors are the propriety asus ones, one on the tablet and one on the keyboard, the other small connector on the tablet is HDMI output
I have the "chunky" USB OTG connector as well.. I don't think there's a cable though... I looked everywhere on the net
I don't have a dock therefore the only way I can plug a USB flash drive, Keyboard/mouse into the TFT is via the ASUS USB OTG Host adapter View attachment 1384503
I was after something a little slimmer and believe a OTG cable would be ideal - Refer to picture for an example of what I'm referring to View attachment 1384504
Micro USB OTG cables can be used with many phones and tablets sporting a micro USB connector. The TFP obviously doesn't have a micro USB connector therefore I was hoping someone knew how to make an ASUS 40 pin to female Type-A plug which replicates the ASUS USB OTG Host adapter.
Has anyone pulled apart the ASUS USB OTG host apapter? What's inside it?
Hey guys. There are several articles and videos around on how to make your own OTG cable. It essentially involves shorting a single pin. I have no idea if it'll work with a TFP, but I'm going to give it a shot today or tomorrow if I get some time. My plan is to use the normal TFP USB cable, but plug it into a female/female USB gender changer that has been modified to short the pin. I'm almost positive that it'll work on my SGS3, and I don't see why it wouldn't also work for my TFP. I'll report back.
Nevermind. I now see that the TFP USB end has five pins, so they won't match up with the 4-pin female USB port. Oh well...
TFP and OTG
Does anyone know if the OTG will support a USB hub?
gtan2589 said:
Does anyone know if the OTG will support a USB hub?
Click to expand...
Click to collapse
The TFP doesn't have OTG, it's a regular USB host.
So yea, it will support a hub because it's a standard USB device class, with its driver already part of the kernel.
Hi,
Does anyone has any idea why the micro-USB connectors which are used to connect a HDMI or VGA cable to the micro-USB port of the Samsung Galaxies are longer than let's say a data micro USB connector?
I've tried a micro-USB extension cable, and they don't work with these video-output connectors because they're too long. When I looked inside the connector I noticed that all the connection points are way down the connector, and that the upper part is just extra. So I've tried filing off the upper part. Now it charges the phone, but still no video output.
Thanks!
Never mind, just found an answer to my question
Apparently the dock / video out connectors are 11 pin micro USB connectors. The data and charging cable connectors are 5 pin.
Now to find an extension cable for that. I wonder if this excists.
It would be much easier to find HDMI/VGA extension cable rather then the 11 ping micro usb.
golalmo said:
It would be much easier to find HDMI/VGA extension cable rather then the 11 ping micro usb.
Click to expand...
Click to collapse
Indeed, but the problem is that I want to extend the dock connector so I can put my Note 3 next to my dock to put it in landscape.
I tried to hook up a game controller via the OTG adapter and it appears to not send any power out from it. Even with a USB thumb drive and other USB C adapters, nothing seems to work. Has anyone else noticed this? You can transfer data via the cable just fine, but I find it strange it doesn't send any power through the plug.
Have you tried connecting it the other way round?
tomixnscale89 said:
I tried to hook up a game controller via the OTG adapter and it appears to not send any power out from it. Even with a USB thumb drive and other USB C adapters, nothing seems to work. Has anyone else noticed this? You can transfer data via the cable just fine, but I find it strange it doesn't send any power through the plug.
Click to expand...
Click to collapse
I noticed the same thing. I believe it's because once it comes out the other side with the 5-pin adapter, it is then reduced to the old micro-usb specification, which uses 5 wires. True USB-C connection has like 20 or 24 pins. I was able to get a couple very basic OTG of things to work, like a mouse and a thumb drive. BUT HERE IS THE CATCH - The mag connector has 5 pins, reduced from 20-some on the C connection.. so true USB-C connection is no longer possible once you get on the other side of the connector. So the trick is to NOT use a USB-C OTG when it's in the case with magnetic adapter. You must use a Micro USB OTG with a Micro-to-C adapter attached to that. Even so, not everything worked just by sticking on the Micro-to-C adapter.. Mouse and a thumb drive worked, but my ethernet adapter and VGA/HML/HDMI adapters did not. Out of the case, I can use my USB-C to HDMI cable to display on my TV. But same cord does not work with the magnetic adapter with the case. It is simply not possible because the reduction of contact pins from phone to case to magnet.. One more thing to consider, if you're trying to do anything other than charging, make sure the magnet is on the right way.. there's a little logo it should be in the front.
If I can come across a spare or broken Dual Screen case, I'd be curious to take it apart and see if it would be possible to rig it up with a better plug for the case.. find which wires go to the workings of the DS and leave them intact, but then try to replace the magnetic pins with a female C plug that has all the contacts intact still..
Seymour_Asses said:
I noticed the same thing. I believe it's because once it comes out the other side with the 5-pin adapter, it is then reduced to the old micro-usb specification, which uses 5 wires. True USB-C connection has like 20 or 24 pins. I was able to get a couple very basic OTG of things to work, like a mouse and a thumb drive. BUT HERE IS THE CATCH - The mag connector has 5 pins, reduced from 20-some on the C connection.. so true USB-C connection is no longer possible once you get on the other side of the connector. So the trick is to NOT use a USB-C OTG when it's in the case with magnetic adapter. You must use a Micro USB OTG with a Micro-to-C adapter attached to that. Even so, not everything worked just by sticking on the Micro-to-C adapter.. Mouse and a thumb drive worked, but my ethernet adapter and VGA/HML/HDMI adapters did not. Out of the case, I can use my USB-C to HDMI cable to display on my TV. But same cord does not work with the magnetic adapter with the case. It is simply not possible because the reduction of contact pins from phone to case to magnet.. One more thing to consider, if you're trying to do anything other than charging, make sure the magnet is on the right way.. there's a little logo it should be in the front.
If I can come across a spare or broken Dual Screen case, I'd be curious to take it apart and see if it would be possible to rig it up with a better plug for the case.. find which wires go to the workings of the DS and leave them intact, but then try to replace the magnetic pins with a female C plug that has all the contacts intact still..
Click to expand...
Click to collapse
Thank you @Seymour_Asses ! I saw here https://twitter.com/konic0s/status/1202966945693220865 that LG G8X supports USB-C to HDMI adapters but I didn't know if it also worked with the Dual Screen case but now I know it doesn't, thanks for the information, very helpful ! :good:
BTW I think that when you connect the Dual Screen case to the G8X it uses the dedicated USB-C high speed pins of the G8X for video-out so these pins are not available anymore for other HDMI out, I'm not sure about it and don't have any proofs but it seems you are right about not enough pins on the mag connector.
If i remember correctly, the manual states that most USB-C functions wont work though the dual screen case. I think there was some speculation that its due to most of that bandwidth being used for the second screen.
Quite simple: the Mag USB-C adapter is for charging only. It drives me mad as i have a professional USB-C headphone that I use for conferencing.
But I understand the reason: when in dual screen, the USB-C data connection is in use dor the second screen, enabling the USB-C connection beyond that requires a hub to be built in the case "before" the DS connection (so it wont work building it in the dongle itself).
I wish LG went with a Pogo connector on the bottom or on the side to activate the DS case. This would have made the chin slimmer and freed up the USB-C port.
Anyway, it is what it is now, and i will not trade my LG G8x DS for anything at the moment... Until maybe that Surface Duo phone for which I might need to sell a vital organ ?