Moto g4 plus stuck in twrp recovery mode - Android Q&A, Help & Troubleshooting

Hi,
I have installed twrp and rooted my device but after installing SU.zip I am unable to run my regular system. Whenever I reeboot I again log in twrp. So please help me out and I don't know how to flash ex kernel and flash uninstaller. I do this with my PC command prompt fastboot functions. I only have two options that are open twrp or bootloader but unable to use my device. Needs urgent help, please help me I am so sad...

Related

[Q] newbie needing help upgrading twrp.

So I was trying to install cyanogenmod 11 on my HTC one, but needed to update twrp to version 2.6. I tried using flashify to flash twrp over version 2.5 and now whenever I boot into recovery mode it gets stuck on the "entering recovery" screen. I need help either removing twrp or fixing it. Please help and thank you all in advance!
th30utcast said:
So I was trying to install cyanogenmod 11 on my HTC one, but needed to update twrp to version 2.6. I tried using flashify to flash twrp over version 2.5 and now whenever I boot into recovery mode it gets stuck on the "entering recovery" screen. I need help either removing twrp or fixing it. Please help and thank you all in advance!
Click to expand...
Click to collapse
Use the commands via fastboot.
th30utcast said:
So I was trying to install cyanogenmod 11 on my HTC one, but needed to update twrp to version 2.6. I tried using flashify to flash twrp over version 2.5 and now whenever I boot into recovery mode it gets stuck on the "entering recovery" screen. I need help either removing twrp or fixing it. Please help and thank you all in advance!
Click to expand...
Click to collapse
Download the newest .img file from here
Download - Fastboot Method:
Download the above file into your platform-tools dir. Turn off your device. Turn on the device and keep holding volume down until a menu shows up. Select fastboot from the menu list. Plug the device into your computer. If you have the right drivers installed, your screen should now say FASTBOOT USB. Run the following command via the command line:
Code:
[B]fastboot flash recovery recoveryfilename.img[/B]
Note that you will need to change the last part to match the name of the file that you just downloaded. This method requires that you have the drivers installed that come with the HTC Sync software that are available here. You will also need adb and fastboot for your computer.
Thanks to Flyhalf205 for porting TWRP to the HTC One
information grabbed from Team Win website "http://teamw.in/project/twrp2/164"
Thanks guys, I actually ended up using an application called recovery tools. Fixed it in about 4 seconds! Check it out.

HTC one eye - Stuck at HTC logo screen

Hi All,
I have unlocked my HTC M8 eye with the help of HTCDev site and installed TWRP from playstore. I restarted the phone and went into Fastboot mode and using adb installed TWRP image file for this phone (v2.8.0.3), before it I have saved SuperSU zip file on my local storage. From TWRP in recovery mode I installed SuperSU everything goes good and its shows Success. When I reboot I shows "Your device does not seems to be rooted? Install SuperSu now?" When I gave install now it shows error msg "Failed to copy su binary in to /system/bin/". I tried re-flashing it and tried to install some other versions of SuperSU but none worked. After this phone goes re-booting and stuck in HTC logo screen till I use shortcut keys to enter recovery mode. In Fastboot mode my laptop was able to detect my phone from command prompt and also my internal storage.
I believe I can get back my phone on working. Please help me, I really need my phone back .
If you can still get into recovery, then you can install a custom rom and go that route. Keep in mind, if you are just HTCdev unlocked and you flash a custom rom, you will have to use fastboot to flash the boot.img.
If that doesn't work, then you should be able to find the RUU for your phone and restore it to stock and redo the custom recovery and root. For future reference, just flash the SuperSU zip. TWRP doesn't normally detect that correctly and trying it's method often makes things worse, as you experienced.

OnePlus x not detected by windows. Corrupted custom recovery. Cannot unlock OEM.

Hi,
I was trying to restore oxygenos on my opx.
I connected through adb and tried flashinf a recovery. The flash was unsuccessfull and I was left with my custom CM recovery(which cannot install roms due to some error). Now i tried flashing new recovery again but OEM is locked. The command for unlocking just reboots my device from fastboot mode to recovery mode.
Also, I no longer find my device using adb devices command.
Please help
abhishekckshinde said:
Hi,
I was trying to restore oxygenos on my opx.
I connected through adb and tried flashinf a recovery. The flash was unsuccessfull and I was left with my custom CM recovery(which cannot install roms due to some error). Now i tried flashing new recovery again but OEM is locked. The command for unlocking just reboots my device from fastboot mode to recovery mode.
Also, I no longer find my device using adb devices command.
Please help
Click to expand...
Click to collapse
Not enought infos to help you.
The most direct way is to perform the Mega Unbrick Guide.
https://forum.xda-developers.com/oneplus-x/general/guide-mega-unbrick-guide-hard-bricked-t3272108

i want to install twrp

How are you guys? Soory for my english iam not good My phone is redmi5 I have already unlock bootloader And install adb and device driver and download recovery img for my phone And in cmd I type Fastboot flash recovery recovery.img And it tybe success When I load recovery mod it show my xiaomi recovery not twrp pleas help!!
Bro your twrp not install properly. You want install twrp proper guidance. YouTube have many videos how install twrp in xiaomi mobile. You need a help YouTube. And I suggested you installed treble enabled twrp because its better then normal twrp.
A7medmody196 said:
How are you guys? Soory for my english iam not good My phone is redmi5 I have already unlock bootloader And install adb and device driver and download recovery img for my phone And in cmd I type Fastboot flash recovery recovery.img And it tybe success When I load recovery mod it show my xiaomi recovery not twrp pleas help!!
Click to expand...
Click to collapse
Sometimes I have to do it several times to happen, I find it easier to just flash Batik Recovery (It is based on TWRP) . Good Luck!
Reboot to recovery once from adb.

[Help] Bootloop on Xiaomir Redmi Note 4X

Hello, I'm kind of new at this (this is my first post) so be gentle
So, the last few days I've been trying to install a new rom on my phone (Redmi Note 4X) and the problems started with the model. I only seem to find Redmi Note 4 roms, and as I've come to find, mine is supposed to be the mido one (correct me if I'm wrong though). I have unlocked the bootloader, I have installed and enabled the fastboot on my phone, so the next step was to install the latest TWRP.
There came more problems; I tried doing this through the app and it just wouln't flash it. So I found a guide on how to root my phone and install a new recovery through adb and I followed it. It didn't work. I couldn't find the right twrp version for my phone. When I finally did realise my phone needed mido, I found the latest from the TWRP website. It wouldn't load through adb again. I found a thread about a fixed mido version, which finally worked for me. But my brother who was helping me, and isn't as much of a noob as I am (he has flashed rom and recoveries many times on his Nexus 5X), decided that I necessarily need the latest twrp if I'm going to flash a new rom, so he flashed the new twrp through the old one, and soft bricked my phone (I think). So I'm searching for a guide to unbrick it. (Which I can't seem to find to work at least).
To conclude;
I have unlocked my bootloader
I have access to the fastboot
I tried to flash a recovery
I failed many times, but I managed it
I flashed the latest twrp and bricked my phone
I don't have access to the recovery
My phone is still on a bootloop
I am not sure about which phone model I have
Help!
Thanks in advance.
1. Just check your phone model on its box. If its Snapdragon version (Mido), then just install it via fastboot. (code: fastboot flash recovery twrp-midoxx.img). If you are success, then try to reboot to recovery (fastboot boot twrpmido-xx.img). After booted, then you just manage to rom.zip you want to install. If you don't have it, then download it before from your PC and push it to your phone. Or just enable Mtp checklis from TWRP n copy that file to your internal phone/sdcard. Wipe all/factory reset except internal storage. Then you dan install rom.zip normally. N reboot. (Note: if you are on MIUI and wanted to always stay on it, just flash the file called lazyflasher.zip. n' wipe cache n art cache only then reboot). Flashing custom recovery on stock MIUI Will manage the device Going to bootloop)
2. If you have mediatek version (nikel), searching the fastboot Rom from miui website and flash it normally via fastboot. (SP Flash tool)
Warning: flash the wrong rom file into wrong phone Will make your device brick. So becarefull n knowing what model/code name you have.
Dyt199412syam said:
1. Just check your phone model on its box. If its Snapdragon version (Mido), then just install it via fastboot. (code: fastboot flash recovery twrp-midoxx.img). If you are success, then try to reboot to recovery (fastboot boot twrpmido-xx.img). After booted, then you just manage to rom.zip you want to install. If you don't have it, then download it before from your PC and push it to your phone. Or just enable Mtp checklis from TWRP n copy that file to your internal phone/sdcard. Wipe all/factory reset except internal storage. Then you dan install rom.zip normally. N reboot. (Note: if you are on MIUI and wanted to always stay on it, just flash the file called lazyflasher.zip. n' wipe cache n art cache only then reboot). Flashing custom recovery on stock MIUI Will manage the device Going to bootloop)
2. If you have mediatek version (nikel), searching the fastboot Rom from miui website and flash it normally via fastboot. (SP Flash tool)
Warning: flash the wrong rom file into wrong phone Will make your device brick. So becarefull n knowing what model/code name you have.
Click to expand...
Click to collapse
Hello and thanks for the reply. I have the snapdragon version, but all I'm asking is how am I supposed to flash the lazyflasher without accessing the recovery? Through adb?
fionik said:
Hello and thanks for the reply. I have the snapdragon version, but all I'm asking is how am I supposed to flash the lazyflasher without accessing the recovery? Through adb?
Click to expand...
Click to collapse
Firstly, enter fastboot mode on your device. Connecting to pc and flashing the twrp for mido. "fastboot flash recovery twrp-mido.img". Then boot to it using " fastboot boot twrp-mido.img". Then you will enter the recovery (twrp) in a second. Copy the lazyflasher into your phone (enable mtp first in Mount option in twrp) that you downloaded from pc. Just flash the lazyflasher.zip and reboot.
And why you don't want to flash lazyflasher when it very easy to flash it using recovery twrp? adb? You mean android debugging? Actually, you cant flash a .zip file into your system partition except through fastboot mode. However, fastboot mode (in cmd) only recognize a .img file. I just try to tell you the easier method to make your device boot up.
Dyt199412syam said:
Firstly, enter fastboot mode on your device. Connecting to pc and flashing the twrp for mido. "fastboot flash recovery twrp-mido.img". Then boot to it using " fastboot boot twrp-mido.img". Then you will enter the recovery (twrp) in a second. Copy the lazyflasher into your phone (enable mtp first in Mount option in twrp) that you downloaded from pc. Just flash the lazyflasher.zip and reboot.
And why you don't want to flash lazyflasher when it very easy to flash it using recovery twrp? adb? You mean android debugging? Actually, you cant flash a .zip file into your system partition except through fastboot mode. However, fastboot mode (in cmd) only recognize a .img file. I just try to tell you the easier method to make your device boot up.
Click to expand...
Click to collapse
As I said above, I can only access the fastboot, and I get errors in the adb when I try to flash the twrp image.
fionik said:
As I said above, I can only access the fastboot, and I get errors in the adb when I try to flash the twrp image.
Click to expand...
Click to collapse
Share your error please.
Try fastboot boot twrp.img

Categories

Resources