Hello everyone. After some time for building Roms and kernels for the OnePlus One, now I am here for the OnePlus 5T.
Some of you already know me for what I focus on my builds.
Functionality
Speed
Smoothness
Battery
Features:
Compiled by a custom toolchain from Google to ensure the best experience.
Schedulers available:
SIO
BFQ
ZEN
CFQ - Default
Deadline
NOOP
MAPLE
Extra TCP advanced algorithm:
Westwood - set as default
Reno
Cubic
Highspeed
HTCP
Vegas
Veno
lp
illinois
yeah
Sound Control - Sound and Microphone control
KCAL - Control colours on your display
Notification LED control
Vibration Control
Sound Control
Using noatime
Patches to improve battery life
Passes Safetynet
WireGuard
Todo:
Added upstream patches from google and linux
Change to clang
Version to use:
1.xx - Android Q OOS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download New Kernel
There are two branches:
Stable - which has all proven and tested development
Beta - new features introductions. Remember if your chip fries... It was done with good intentions, intended only for brave people.
To build this kernel I give a huge thank you to great dev @savoca has had a lot of patience and shared his knowledge to build a kernel with a step by step guide, as also explaining how each stuff works.
@andi79 for the introduction of the 64bit model kernel compilation.
All credits go to the OnePlus team.
Disclaimer: With the use of this kernel I am not responsible for any damage to the phone. It is at your own risk in case happens something wrong. I use this kernel daily and test it before release.
Source code
XDA:DevDB Information
[KERNEL]New Kernel for the OnePlus 5
Contributors
jgcaap
ROM OS Version: 10 Pie
Version Information
Status: Stable
Created 2017-12-10
Last Updated 2020-05-20
XDA:DevDB Information
New Kernel, Kernel for the OnePlus 5T
Contributors
jgcaap
Source Code: [url]https://github.com/NewRom/android_kernel_oneplus_msm8998[/URL]
Kernel Special Features:
Version Information
Status: Stable
Created 2018-04-01
Last Updated 2020-05-20
Instructions:
1) If you come from another kernel (which is not stock) flash the boot.img of the stock version.
2) Flash the zip file.
Changelog:
v.1.02-Q - 20/05/2020
Added Wireguard
Added Max min frequency controller
Activated ULPS and low-phypower off to screen (need testing).
Increased frequency to 2457600 Hz
Added wifi driver used on LOS (please test if works fine on los for now my support goes only to OOS)
Disabled a bunch of debug and logs to have more battery.
Added Vibration control.
Added KCAL (needs testing)
Reduced swapinness (more performance)
CFQ as default scheduler
Change settings to have CFQ optimized for SSD
Added sound control (needs testing)
Disable gentle fair sleepers
Added extra fixes from the community.
Added network schedulers: Westwood ,Reno, Cubic, Highspeed, HTCP, Vegas, Veno, lp,illinois,yeah
Added IO schedulers: noop,deadline,cfq,fiops,sio,fifo,sioplus,tripndroid, vr,zen,maple
Troubleshooting :
No wifi or broken hotspot.
Solution: You probably come from another kernel, please reflash rom, then flash kernel.
Battery drain:
This rom has a bug in the wifi. Please go to advanced settings and turn off scanning always available.
dude welcome back, this guy made the best Rom for OPO, nice to see u back, are u going to be make some Roms too?
Bradl79 said:
dude welcome back, this guy made the best Rom for OPO, nice to see u back, are u going to be make some Roms too?
Click to expand...
Click to collapse
You can count on that
Bradl79 said:
dude welcome back, this guy made the best Rom for OPO, nice to see u back, are u going to be make some Roms too?
Click to expand...
Click to collapse
+1 Welcome to the OP5T forum mate, hope to see your awesome ROM too.
+1 Welcome to the OP5T forum mate, hope to see your awesome ROM too.
Envoyé de mon ONEPLUS A5000 en utilisant Tapatalk
Nice to see you here now.
Bradl79 said:
dude welcome back, this guy made the best Rom for OPO, nice to see u back, are u going to be make some Roms too?
Click to expand...
Click to collapse
He's probably designing his Oreo Rom as we speak
Nice to see you here.. Hope to see some optimized lineage stuff from you.. Your roms on the one were awesome..
SlyUK said:
He's probably designing his Oreo Rom as we speak
Click to expand...
Click to collapse
Not yet. Preparing the kernel first. Alot of new things to learn..
Oreo Rom will come eventually just need some time to conclude it.
The kernel I thought as the easiest and the priority for now.
deleted
Update:
Replaced v1.00
Added proprietary wifi-drivers to the zip file.
Apparently, the wifi-driver is proprietary and for that reason, we do not have it on the source. While comparing with other devs, seems that they are using opensource wifi-drivers from 4.5.x. Decided, for now, to stick with proprietary drivers for the OnePlus 5T, unless we are speaking on an AOSP ROM or if we discover that there are more benefits.
This is for the people which reported wifi not working. What happened was you came from another kernel which replaced wifi files (originally from stock), and this broke wifi when using this kernel.
With stock always gave me 173 000.
jgcaap said:
Not yet. Preparing the kernel first. Alot of new things to learn..
Oreo Rom will come eventually just need some time to conclude it.
The kernel I thought as the easiest and the priority for now.
Click to expand...
Click to collapse
Absolutely plenty of time for your Oreo Rom. Perfect the kernel first
@jgcaap when did you received your device ? Didn't took long to bring up the awesomeness . Thanks for the great work.
CroW_D said:
@jgcaap when did you received your device ? Didn't took long to bring up the awesomeness . Thanks for the great work.
Click to expand...
Click to collapse
I bought on the store on Wednesday. Here in Denmark we have a store selling them.
Planning on adding any additional screen wake-up gestures?
xocomaox said:
Planning on adding any additional screen wake-up gestures?
Click to expand...
Click to collapse
Problably yes. Need to access which ones exist.
Hello guys,
Just uploaded a new update to the kernel. The version 1.01 includes the following:
Add a collections of schedulers and TCP Advanced Algorithms
Disable CC for size
Disable gentle fair sleepers
Sound control
block: add FIOPS scheduler
block: Add SIO scheduler
block: add fifo scheduler
block: add sioplus scheduler
block: add tripndroid scheduler
block: add vr scheduler
block: add zen v2 scheduler
block: add BFQ Scheduler
set initial TCP window size to 64K (speed improvement)
clock-osm.c: Expose PVS level via sysfs
vfs: move permission checking into notify_change() for utimes(NULL)
kernel: Only expose su when daemon is running
fs: default to noatime
Correctly unregister usb_psy
Merged commits for upstream linux kernel untill v4.4.52
Notes: The wifi proprietary drivers are closed source and connected to the kernel 4.4.21. When I change the kernel version number to something else wifi gets broken. So the number of the kernel is 4.4.21 but the kernel is updated with upstream Linux patches until 4.4.52.
This version has also security patches to the SU which will protect from its vulnerabilities.
Added some performance configurations which will speed up the phone for the same battery life.
Introduced the sound control feature.
Change from relatime to noatime to increase the durability of the SSD without compromising performance.
Added a folder with the stock kernel (necessary to flash through fastboot). I will create a zip to flash through recovery on the weekend.
In case you have any questions please let me know.
Related
Ronflex Kernel
for TW Marshmallow
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Introduction:
• I'm a student who always wanted to contribute to the XDA community but I didn't have time. There were also many many great developers on my previous devices (Xperia X10 and Galaxy S3) so I didn't have to do things myself, I just had to flash and enjoy.
But on this phone, there aren't many devs, so I began to build things myself. I'm very proud to release my first project ever on XDA .
• I want this kernel to be built by the community with your suggestions of new features and that we discuss together about what we could add to this project, this is very important for me as I am not a dev, but just a beginner. I will try to answer every question that you may ask but please don't ask for ETA as I'm just a student.
• I ask the others devs to be kind with me as I'm still not very familiar with git.
• I'm not responsible for what could happen to your phone by flashing this kernel.
Features:
• Built with GCC 4.8 for stability
• Built with new Marshmallow sources
• init.d support
• Permissive SELinux status
• New governors (give suggestions if you know good governors and hotplugs !)
• New CPU hotplugs
• New IO schedulers
• Disable CRC for better memory speed
• Adreno Idler
• Undervolting (may be buggy)
• Network speed tweaks
• Powersuspend
• Kccal screen calibration
• Fastcharge
• AnyKernel by Osmosis flashing method
Bugs:
• Android logging
Instructions:
• You must be on Touchwiz, it will not work on CM nor Mokee.
• Use a custom recovery
• Download the kernel and put it on the memory of your phone
• Boot into recovery (Home/Vol +/Power)
• Flash the kernel and wipe dalvik and cache
It will reset your kernel adiutor settings to prevent any problem. If you don't want that, open anykernel.sh in the kernel package and change the line do.KAclean=1 to do.KAclean=0.
Share your setup (this is your part guys !):
Please report your best combinations of ROM/governor/hotplug... with stats if possible and I'll add it here
• @spezl config
Changelog:
• V1-
Initial release
• V1.1-
Fix the name string in kernel version
Disable some gov and hotplugs as they were not working
Disable CPU boost, for hopefully a better battery life
• V2-
Hotplugs are back
Underclock (268) / overclock (2880)
Added kcal support for screen tweaks
Prevent some kernel wakelocks
New io schedulers
Fastcharge
• V2.1-
started from scratch
change toolchain : back to gcc 4.8, it will ensure stability
anykernel flashing method : we don't need to include supersu in the kernel package anymore
init.d support
fixed simple-ondemand gpu gov
oc and uc gpu : 166 mhz to 800 mhz
Download links:
Ronflex Kernel 2.1: http://forum.xda-developers.com/devdb/project/dl/?id=18975
Ronflex Kernel 2: http://forum.xda-developers.com/devdb/project/dl/?id=18676
Ronflex Kernel 1.1: http://forum.xda-developers.com/devdb/project/dl/?id=18534 // Mirror
Ronflex Kernel 1: http://forum.xda-developers.com/devdb/project/dl/?id=18526 // Mirror
Stock kernel : http://www.mediafire.com/download/8jeubsas7oiu37p/Stock.zip (thanks to MEGAX91)
Credits :
• Kykint and MEGAX91 for answering my questions
• Tkkg1994 because I spent many hours on his sources to understand how things worked and to fix compilation errors
• The creators of the hotplugs/governors/TC and the other features
And of course hit thanks if you like my work...
XDA:DevDB Information
Ronflex Kernel, Kernel for the Samsung Galaxy S 5
Contributors
licha26
Source Code: https://github.com/badscimmia/Ronflex-Kernel
Kernel Special Features:
Version Information
Status: Beta
Beta Release Date: 2016-05-20
Created 2016-05-20
Last Updated 2016-06-23
Reserved
Recommendations/tips :
• Use this kernel tweaker : Kernel Adiutor Mod. If settings don't stick at boot, set delay to 20 sec, press Test in settings, close the app, wait the 20 seconds and reboot
• If you don't know where to start with the features, interactive + zen decision will give you decent battery life, good overall speed and no heating.
• If you use zzmoove, disable cpu hotplug as it is already built in the governor. To change the profiles of zzmoove, go to tunables, profile number and choose the one that you want. Here's the reference
Ronflex profile :
I managed to create an awesome profile to have both performance (ultra smooth experience) and awesome battery life (1hr screen on + wifi of social networking and surfing = 10%, see the screenshot). Here are the broad lines of the settings:
• The key of this profile is this very interesting xda thread : you can mode the interactive governor to do exactly what you want it to do (especially which frequencies it should use). I applied the settings calculated for our lovely G901F on yankactive governor which is known to be power efficient.
• The hotplug is bricked hotplug, a very efficient hotplug for both performance and battery life
• No overclock, only underclock to 268 mhz
• msm-adreno-tz gpu governor at 240-500 mhz + adreno idler, I don't play games a lot but for instance Alto's adventure is working great with this set up
• No undervolt
• Kccal screen calibration new settings to reduce brightness of the screen. With stock settings, the screen was in my opinion too bright, especially inside and in the dark.
How to apply Ronflex profile ?
• Download RonflexProfile.zip
• Unzip it
• Replace profiles.json with the one you found in my zip in data/data/com.kerneladiutor.mod/files (don't set permissions or the profile will not display !!!)
• In kernel adiutor mod, go to profile, click on RonflexProfile and apply !
hey great work on this kernel !!! if possible could you add more io schedulers in the next release? preferable sio. thank you for your hard work !!
Nice might try this maybe add cpu/gpu overclocking? nice to see 901f kernels.
Sent from my SM-G901F using Tapatalk
XPERIAAplooper said:
hey great work on this kernel !!! if possible could you add more io schedulers in the next release? preferable sio. thank you for your hard work !!
Click to expand...
Click to collapse
cloudx720 said:
Nice might try this maybe add cpu/gpu overclocking? nice to see 901f kernels.
Sent from my SM-G901F using Tapatalk
Click to expand...
Click to collapse
Hi
I take in consideration your demands . However I still don't know when I'll release next version as my week of exams begins tomorrow. Stay tuned
Would it be possible for anybody to post stock kernel zip for Reflash in case I want to go back to it?
Sent from my SM-G901F using XDA-Developers mobile app
spezl said:
Would it be possible for anybody to post stock kernel zip for Reflash in case I want to go back to it?
Sent from my SM-G901F using XDA-Developers mobile app
Click to expand...
Click to collapse
Hi, I'd advise you to use TWRP and backup your boot partition. If you need to get back to stock kernel, just restore
But if you really need a flashable stock kernel zip, I'll make one
licha26 said:
Hi
I take into consideration your demands . However I still don't know when I'll release next version as my week of exams begins tomorrow. Stay tuned
Click to expand...
Click to collapse
hehe thanks. good luck for your exams
licha26 said:
Hi
I take into consideration your demands . However I still don't know when I'll release next version as my week of exams begins tomorrow. Stay tuned
Click to expand...
Click to collapse
Good luck, CRACK!!!
[emoji310][emoji310]
Good luck man.
Waiting for a flashable stock kernel
sent from my Nokia 3210 using xda-Developers mobile app
@Android2003
use this one :
http://uploadboy.me/1dz4xttx86vc/Stock.zip.html
I'm currently testing V2! Expect a release soon
V2 is online, find the links in OP : what's new ?
- hotplugs are back
- underclock (268) / overclock (2880)
- added kcal support for screen tweaks
- prevent some kernel wakelocks
- new io schedulers
- fastcharge
I'll publish my kernel adiutor profile soon, I still need to make some optimizations but I must say that it is very promising ! (around 45 min for 10% consumption when screen is on on wifi)
Francais, et en plus de ca Lyonnais ! GG Frero.
Wait for your kernel profile , so good for 45 minutes. Thanks Man !
Testing v2.
Thanks CRACK!!!
licha26 said:
V2 is online, find the links in OP : what's new ?
- hotplugs are back
- underclock (268) / overclock (2880)
- added kcal support for screen tweaks
- prevent some kernel wakelocks
- new io schedulers
- fastcharge
I'll publish my kernel adiutor profile soon, I still need to make some optimizations but I must say that it is very promising ! (around 45 min for 10% consumption when screen is on on wifi)
Click to expand...
Click to collapse
In OP u say, use kernel adiutor mod.
This version of the app is very buggy for me.
Stock app is working good.
Anyone with the same problem?
sent from my Nokia 3210 using xda-Developers mobile app
Delete
I get bootloop when I flash this kernel..
Runs great with zzmove batteryplus, OC 2880/UC 268, UV-10, cfq with 512kb int./1024kb ext. read ahead and msm adreno tz with idler enabled and tuned to be less aggressive.
Testing SOT now...
Thanks a lot @licha26!
...btw: anybody able to enable simple_ondemand governor for GPU without sudden reboot?
Sent from my SM-G901F using XDA-Developers mobile app
In all day I dont had any issue, reboot, etc...
The battery life is very good.
Great work!!!
[emoji106][emoji106]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Unofficial DorimanX builds by GreekDragon(The resurrection of jellybean kernels)
Dorimanx JB unofficial kernel by GreekDragon
The Background:
DorimanX development has stopped for a while now. I've been a long term dorimanx user, but I felt that a lot of features need to be implemented into the kernel. As of a result, I decided to make my own personal builds! Please note that I'm no way as good as the master himself, Dorimanx, but I try to implement features to the best of my abilities. Also, I'm not going to be a proper maintainer of dorimanx kernel, this is just what I've done in my spare time.
This is a fork from Dorimanx's git.
If you have problems or if anything goes wrong, you can flash latest build by Computoncio
You can download from his official website:
http://dorimanx.casoncia.org/
The Mission:
To continue giving support for the much loved kernel. New features and additions will be added to improve flexibility and speed to the already amazing kernel. My goal is to improve DorimanX kernel as much as I can, without sacrificing stability.
4.1.X JELLYBEAN ONLY!
DISCLAIMER:
I'm not responsible for bricked devices or wrong version flashing
You are using this kernel at your own responsibility
——— !!!!!!!! YOU HAVE BEEN WARNED !!!!!!!! ———
FEATURES:
This kernel includes the following additional features over stock dorimanX kernel:
- CPU Governors: HYPER, Ondemand, pegasusQ, Intellidemand, neoX, darkness, nightmare, sleepy, conservative (Default: HYPER)
- TCP Algorithms: Cubic, Reno, BIC, Westwood, Highspeed, Hybla, HTCP, Vegas, Veno, Scalable, Lp, Yeah, Illinois (Default: Westwood)
- FPBug/Musicbug fix is already included in this kernel!
- BLN and BLNWW support
- Updated Linux Kernel version to 3.15.0 stable!
- IO Schedulers: ROW, FIOPS, SIO, BFQ, CFQ, Noop, ZEN, Deadline (Default: SIO)
- Trim support
THINGS I WILL NOT ADD:
Code:
- LZ4 Compression (Our Boot partition is way too small to support this)
- Useless CPU governors such as Userspace
- Colour tuning support (Unless someone helps me with this)
- Recovery version (WIll only consider doing this if working on LP kernel)
- Higher thermal limits (We all know what happens if we do this)
- Higher overclocking/Lower underclocking capabilities (So you want less stability and more SODs?)
- Synapse support (Stweaks is the only app that can fully support this kernel)
CREDITS:
Dorimanx (the real master of the kernel)
Gokhanmoral (Siyah Kernel)
Voku1987(This Kernel)
Alucard_24(This Kernel)
STANTRC(This Kernel)
Entropy512 (CyanogenMod)
Tungstwenty (On screen gestures addon)
Torvalds (Kernel 3.6.Y maintainer)
Computoncio (This Kernel)
cybernetus (This Kernel)
stelistcristi (Contents of this post)
chhapil (For helping me with all of the issues, thanks man)
Chet Kener (For UBER toolchain)
Lanchon (For TRIM fix)
Zeitferne (For FP Bug/Music Bug fix)
gsstudios (For his help and his thread template)
DOWNLOAD:
Siyah-Dorimanx-V8.70-JB-SGII-PWR-CORE-DRAGON-TRIM.zip
AndroidFileHost Download Folder
CHANGELOG:
Refer to second post
KERNEL SOURCE:
Source code of the kernel can be found here:
https://github.com/dragonGR/Dorimanx-SG2-I9100-Kernel
https://github.com/dragonGR/initramfs3
ISSUES:
- All dorimanx bugs
USEFUL LINKS
- CPU Governor and I/O Scheduler Guide
- DorimanX tuning guide
TCP Algorithm guide
XDA:DevDB Information
DorimanX JB by GreekDragon, Kernel for the Samsung Galaxy S II
Contributors
GreekDragon, chhapil
Source Code: https://github.com/dragonGR/Dorimanx-SG2-I9100-Kernel
Kernel Special Features:
Version Information
Status: Stable
Created 2016-07-15
Last Updated 2016-12-03
Changelogs:
--RELEASED VERSIONS --
Code:
[B]DorimanX 8.70 (STABLE) [/B]
- Massive update -
- Upstream & Security fixes -
- Stability improved -
- Switched to gsstudio's fork -
Reserved
Welcome to the team
@Lysergic Acid @gsstudios , @arnab , @GreekDragon @Trafalgar Square ..... and i missed many but what a Team on I9100 again
thanks to all to continue to maintain our device with a so high level of development !
Troubadour666 said:
@Lysergic Acid @gsstudios , @arnab , @GreekDragon @Trafalgar Square ..... and i missed many but what a Team on I9100 again
thanks to all to continue to maintain our device with a so high level of development !
Click to expand...
Click to collapse
After 5 years, s2 is still alive and kicking. I guess is a zombie now.
Its work
Do you have any profile between battery/stability/games
I am here
xn0live said:
Its work
Do you have any profile between battery/stability/games
Click to expand...
Click to collapse
I don't want to touch profiles because i know i will screw up there.
Trafalgar Square said:
I am here
Click to expand...
Click to collapse
Of course you are here.
I'm testing a new v8.52. I added IsoRec and some other things, if everything is good, i will release it.
Have you pulled the fix for package parsing error in JB?
As I mentioned to you I'm not able to keep up these days due to me professional commitment, so your contribution to JB branch is a welcome change. Thanks for that
I have one concern over how the Dorimanx kernel development is heading.
Already the JB vs KK, MM code is now much fragmented, I was trying to my best to bring JB much closer to the current branches but not fully.
I would like to know your views on this
chhapil said:
Have you pulled the fix for package parsing error in JB?
As I mentioned to you I'm not able to keep up these days due to me professional commitment, so your contribution to JB branch is a welcome change. Thanks for that
I have one concern over how the Dorimanx kernel development is heading.
Already the JB vs KK, MM code is now much fragmented, I was trying to my best to bring JB much closer to the current branches but not fully.
I would like to know your views on this
Click to expand...
Click to collapse
Fragmentation was going to happen sooner or later, especially with all those changes required just to get MM working.
I will help with JB development when I have free time alongside GreekDragon. LP and MM will and always be my primary focus (until new android versions come out)
gsstudios
Could you explain why there's dorimanx.zip file inside the kernel file
Was it a mistake or you compiled two different kernels?
gsstudios said:
Fragmentation was going to happen sooner or later, especially with all those changes required just to get MM working.
I will help with JB development when I have free time alongside GreekDragon. LP and MM will and always be my primary focus (until new android versions come out)
gsstudios
Click to expand...
Click to collapse
May be my expectations would be wrong, apart from Mali code, rest of the code should be almost same.
Even the WiFi driver has become totally open source now but it's not merged to JB branch fully.
Lot of pieces related to net, scheduling are also different.
I guess since Dorimanx and computino's days it has started bifercating.
I hope we can bring it together
Always if my mobile is off(screen off) and i get a whatsapp message my phone wake up
where is the option, where i can disabled it?
BLN is off
and what does it mean if a person say i am using " cpu grpup 2 or cpu group 3" where is the setting for that
chhapil said:
Have you pulled the fix for package parsing error in JB?
As I mentioned to you I'm not able to keep up these days due to me professional commitment, so your contribution to JB branch is a welcome change. Thanks for that
I have one concern over how the Dorimanx kernel development is heading.
Already the JB vs KK, MM code is now much fragmented, I was trying to my best to bring JB much closer to the current branches but not fully.
I would like to know your views on this
Click to expand...
Click to collapse
Yeah, i'm testing it along with some other things.
I have something in my mind. If everything is ok, JB kernel will be closer to LP one. Not sure if you get me.
gsstudios said:
Fragmentation was going to happen sooner or later, especially with all those changes required just to get MM working.
I will help with JB development when I have free time alongside GreekDragon. LP and MM will and always be my primary focus (until new android versions come out)
gsstudios
Click to expand...
Click to collapse
Thanks again.
Thanks.
Muhammadsoli said:
Could you explain why there's dorimanx.zip file inside the kernel file
Was it a mistake or you compiled two different kernels?
Click to expand...
Click to collapse
Is a mistake.
chhapil said:
May be my expectations would be wrong, apart from Mali code, rest of the code should be almost same.
Even the WiFi driver has become totally open source now but it's not merged to JB branch fully.
Lot of pieces related to net, scheduling are also different.
I guess since Dorimanx and computino's days it has started bifercating.
I hope we can bring it together
Click to expand...
Click to collapse
WIFI Drivers is stable on JB.. correct me if i'm wrong, but why to update the drivers when the one from JB works great?
xn0live said:
Always if my mobile is off(screen off) and i get a whatsapp message my phone wake up
where is the option, where i can disabled it?
BLN is off
and what does it mean if a person say i am using " cpu grpup 2 or cpu group 3" where is the setting for that
Click to expand...
Click to collapse
What do you mean?
About cpu group, is on STweaks and specifically in CPU-Voltages tab.
Dorimanx v8.55 is up!
Changelogs:
- Added IsoRec
- Kernel is now 3.15
- Removed zzmanX
- Added zzmoove
- Removed Powersave governor
- Removed Perfomance governor
- Removed VR and FIFO schedulers
- Enabled other flags for FIOPS
- Updated SuperSU to v2.46
- Fixed permissions for power efficient workqueues parameter
- Fixed parsing package error
- Synced chhapil's zram updates
- Set lz4 as the default algorithm for zram
- Merged almost all fixes from zzmoove develop branch.
- Added tcp algorithm changing support and set westwood as the default
- Governors Updated
- Tuned IO schedulers
- Fixed some memory corruptions
- Sync IO scheduler changes with KK branch
- Fixed some leaks
- Applied some security updates
- Added PE workqueue control
- Added TCP algorithm changing support to stweaks
- Initial support for software CRC toggle
Downloads
AFH: https://www.androidfilehost.com/?fid=24591000424948196
Github(mirror):https://github.com/dragonGR/Dorimanx-SG2-I9100-Kernel/releases/tag/v8.55-stable
Found some issues
Stweaks always detects a value been changed, I think your profiles are out of sync
Trim is not working properly, phone hangs while trimming, check the discard option in fstab in initramfs
Overall deep sleep is good, resume is faster after screen off state
:good:
chhapil said:
Found some issues
Stweaks always detects a value been changed, I think your profiles are out of sync
Trim is not working properly, phone hangs while trimming, check the discard option in fstab in initramfs
Overall deep sleep is good, resume is faster after screen off state
:good:
Click to expand...
Click to collapse
TRIM works fine here. And i have affected chip if that matters.
About Stweaks, i think i know the problem. Testing.
Resume is faster indeed.
I flash the 2 version
the kernel is not very stable, its freeze almost
xn0live said:
I flash the 2 version
the kernel is not very stable, its freeze almost
Click to expand...
Click to collapse
No freeze for me. All is good. @chhapil you faced freeze?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Introduction
Hello everyone, this is my kernel for the Nexus 6, based on my kernel for the Nexus 6P. I aim to add enough features to matter while keeping it lean and stable. Hopefully you enjoy! Please read this entire post, most of your questions will be answered in here!
Features
Here are the major features of the kernel (feel free to explore Github)
Upstream Linux versions 3.10.41-3.10.104
Updated to the December security patch
Patches for some CVEs
Upstream patches from CAF
Support for overclocking to 2880 MHz (stock values by default)
CPU governors: barry_allen, blu_active, chill, conservative, darkness, elementalx, impulse, interactive (default), nightmare, ondemand, performance, smartmax, userspace, zzmoove
Hotplugs: blu_plug, mako_hotplug, msm_sleeper, zen_decision (default - mpdecision is disabled)
High brightness mode and backlight dimmer
KCAL color control
Adreno Idler
Wake gestures (sweep2wake, doubletap2wake, sweep2sleep, and camera launch gesture)
Voltage control
Franco sound control and high performance audio
Adaptive low memory killer
UKSM (disabled by default)
I/O schedulers: bfq, cfq, deadline, fiops, maple, noop, sioplus (default), tripndroid, and zen
USB fast charging
Wakelock controls
BCL disabled
TCP algorithms: bic, cubic, highspeed, htcp, hybia, illinois, lp, reno, scalable, vegas, veno, westwood (default)
Kexec patch for MultiROM support
Full F2FS support
Compiled with an Uber-based 6.3.1 toolchain located here
Forced encryption and dm-verity disabled
Built with AnyKernel2 thanks to @osm0sis
Downloads
7.0/7.1/7.1.1 (1.x): Main
Installation
If you are on stock:
If you are on the stock kernel: flash the kernel zip and reboot
If you are on a custom kernel: flash the stock boot image matching your build number, flash the kernel zip, and reboot
If you are on a custom ROM:
If you are on the kernel that came with your ROM: flash the kernel zip and reboot
If you are on a custom kernel: dirty flash your ROM zip, flash the kernel zip, and reboot
Upgrading from one Flash version to the other:
Just flash the kernel zip and reboot
Changelog
Nougat 7.0
Code:
[B]1.8[/B] ([URL=http://forum.xda-developers.com/showthread.php?p=70246281]release post[/URL])
[LIST]
[*]Toolchain bumped to 6.3.1
[/LIST]
[B]1.7[/B] ([URL=http://forum.xda-developers.com/showthread.php?p=70112925]release post[/URL])
[LIST]
[*]December security update
[*]Upstream F2FS commits
[*]Improvements to cpuidle
[*]Double tap to wake now works when either halfscreen or fullscreen is selected in KA
[*]Fix tethering on 7.1.1 ROMs
[*]Add Live Display (work with KCAL thanks to [user=4684315]@flar2[/user])
[/LIST]
[B]1.6[/B] ([URL=http://forum.xda-developers.com/showthread.php?p=69873175]release post[/URL])
[LIST]
[*]Revert an interactive governor patch that was introducing lag
[/LIST]
[B]1.5[/B] ([URL=http://forum.xda-developers.com/showthread.php?p=69859780]release post[/URL])
[LIST]
[*]Fixes for sdcardfs on certain ROMs like CM 14.1
[*]Upstream patches from CAF and Linux
[*]Interactive governor improvements
[*]Detect when kernel is flashed on an unsupported Android version
[*]Add support for FK Updater's performance profiles
[/LIST]
[B]1.4[/B] ([URL=http://forum.xda-developers.com/showthread.php?p=69526781]release post[/URL])
[LIST]
[*]November security update
[*]Chill governor updates (thanks to [user=5051294]@frap129[/user])
[*]Fixed Mako Hotplug (thanks to [user=4231562]@Yoinx[/user])
[*]Updated BCL commits (thanks to [user=3292224]@franciscofranco[/user])
[*]Fixed some compiler warnings (thanks to [user=4231562]@Yoinx[/user])
[/LIST]
[B]1.3[/B] ([URL=http://forum.xda-developers.com/showthread.php?p=69264556]release post[/URL])
[LIST]
[*]Upstream Linux patches for vmstat and libgcc
[*]Backported MDSS and GPU patches from Marlin (thanks to [user=3292224]@franciscofranco[/user])
[*]Low memory killer improvements
[*]Removed cmdline patch from 1.2
[/LIST]
[B]1.2[/B] ([URL=http://forum.xda-developers.com/showthread.php?p=69247056]release post[/URL])
[LIST]
[*]Linux version 3.10.104
[*]Move back to a constant tickrate of 300HZ
[*]Add a patch to hide bootloader unlock from SafetyNet
[/LIST]
[B]1.1[/B] ([URL=http://forum.xda-developers.com/showthread.php?p=69183164]release post[/URL])
[LIST]
[*]Add smartmax governor
[*]Add full F2FS support
[*]Add Motorola quick wakeup driver
[*]Fix simple_ondemand GPU governor
[*]Add [URL="http://kerneldedup.org/en/projects/uksm/introduction/"]UKSM[/URL] (disabled by default)
[*]Set default I/O scheduler to zen and readahead to 128kb
[*]Start kernel at stock frequencies
[/LIST]
[B]1.0[/B]
[LIST]
[*]Initial release
[*]List of features above
[/LIST]
Frequently asked questions
1.1 Q: I am having an issue, can you help me?
1.1 A: I am not a superstar kernel developer but I will certainly try my best. First, start by reading the release posts, as I may make note of a particular issue. Also search the thread to see if I have discussed it before. If you see nothing, please provide me with a dmesg/last_kmsg and logcat, your ROM/kernel version, and a detailed description of the issue. With that, I'll do my best to assist you.
Code:
adb logcat -d > logcat.txt
adb shell dmesg > dmesg.txt
1.2 Q: Can you add xyz feature?
1.2 A: If you link me the commits or tell me what kernel you had the feature in, I can take a look at them. I will not go digging super hard for commits and I will ignore requests that don't include this information. I won't promise that I will merge every request but I will always take it into consideration.
1.3 Q: How do I control the kernel?
1.3 A: I'd recommend using either @flar2's EX Kernel Manager or @Yoinx's Kernel Adiutor-Mod; both are extremely solid and have given me no issues.
1.4 Q: I am having Wi-Fi disconnects on a 5GHz network, what's up?
1.4 A: Try increasing the wakelock divider on the following sys paths in a terminal emulator (can also be done in EXKM in the Miscellaneous section):
Code:
echo 8 > /sys/module/bcmdhd/parameters/wlrx_divide
echo 8 > /sys/module/bcmdhd/parameters/wlctrl_divide
Thank you to @Buckmarble for pointing this out!
Thanks to:
@REV3NT3CH for showing me what a good developer and kernel looks like
The various developers for their patches (@ak, @Buckmarble, @flar2, @franciscofranco, @frap129, @imoseyon, and @Yank555 to name a few)
@osm0sis for AnyKernel2
@DespairFactor for helping me with some kernel compilation issues and the Linaro source of the toolchains I use
@kantjer for pointing me to Linaro in the first place and being a beta tester along the way!
@malybru for my nifty new signature and thread banner!
All of you guys for viewing the thread
A note about donations
Quite a few people have asked to donate to me in the past and I have turned them down. I am not in this for the money, this is my hobby, something I truly enjoy. If you truly want to donate to something (it is not expected in the slightest), I recommend an entity like the Open Source Initiative, XDA, or any one of the people I have thanked in the OP. Additionally, you are free to copy any and all of my work; the only thing I request is that you not ask for donations as well (though I can't really enforce this lol). Thank you.
Kernel source links
7.0: https://github.com/nathanchance/shamu
DISCLAIMER: I openly welcome off topic in my threads. Mods, please do not clean off topic discussion and users, do not complain about off topic discussion here. I may direct you to another thread if it is so suited but I won't have the discussion cleaned. Thank you.
XDA:DevDB Information
Flash Kernel, Kernel for the Nexus 6
Contributors
The Flash
Source Code: https://github.com/nathanchance/shamu
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 1.8 - Nougat 7.0/7.1
Stable Release Date: 2016-12-25
Created 2016-10-11
Last Updated 2019-07-02
Reserved
Reserved
First
Amazing
Excellent kernel, and a welcome addition to the Shamu!
Hi,
Thank you Nathan!
I know MultiRom isn't working very good with N yet but still:
Does you kernel have the kexec patch inside please?
Droidphilev said:
Hi,
Thank you Nathan!
I know MultiRom isn't working very good with N yet but still:
Does you kernel have the kexec patch inside please?
Click to expand...
Click to collapse
Looking at the source, I do believe kexec is present in Flash Kernel. Multirom manager also reflects that is built in.
rebel1699 said:
Looking at the source, I do believe kexec is present in Flash Kernel. Multirom manager also reflects that is is built in.
Click to expand...
Click to collapse
Thank you! Soon time to flash
Droidphilev said:
Hi,
Thank you Nathan!
I know MultiRom isn't working very good with N yet but still:
Does you kernel have the kexec patch inside please?
Click to expand...
Click to collapse
Yes, as previously mentioned. OP has been updated to reflect this
Can you allow f2fs compatibility ?
many people use such partitions...
Thank you anyhow!
Nautilus74 said:
Can you allow f2fs compatibility ?
many people use such partitions...
Thank you anyhow!
Click to expand...
Click to collapse
Already queued up for the next update.
very good kernel
Kernel is sweet so far. Been rock solid stable in the few days I have been running it - def check this one out guys!
@The Flash
running great with PN 7.0 here.
although kernel manager doesn't show all hotplugs...kernel-aduiter shows only 2 i think and elementalX-manager doesn't show 1.....sorry forgot specifics coz i removed both and have no managers install now.
anyway, quick question:
u have better knowledge in this area than I do...whats the diff between interactive from this kernel and interactive from lean kernel...I have heard great things abt leankernel but never got the chance to run it coz by the time i bought nexus 5 he already moved to nexus 6...by the time i bought nexus 6 he already moved to nexus 6P...lol
[email protected] said:
@The Flash
running great with PN 7.0 here.
although kernel manager doesn't show all hotplugs...kernel-aduiter shows only 2 i think and elementalX-manager doesn't show 1.....sorry forgot specifics coz i removed both and have no managers install now.
anyway, quick question:
u have better knowledge in this area than I do...whats the diff between interactive from this kernel and interactive from lean kernel...I have heard great things abt leankernel but never got the chance to run it coz by the time i bought nexus 5 he already moved to nexus 6...by the time i bought nexus 6 he already moved to nexus 6P...lol
Click to expand...
Click to collapse
LeanKernel uses InteractiveX - Imoseyon's own version of Interactive with a screen off max freq. Interactive is a stock governor. This thread is GREAT for learning about all the awesome governors in this and other kernels - I personally use Darkness. http://forum.xda-developers.com/general/general/ref-to-date-guide-cpu-governors-o-t3048957 Hope this helps bud!
@The Flash
Your kernel runs really great with Tesla! It seems like a rocking solid beast!
Gesendet von meinem Nexus 6
@The Flash Looks great, will it improve battery? And what kernel settings do you recommend for a 4 hrs sot?
spevil07 said:
@The Flash
Your kernel runs really great with Tesla! It seems like a rocking solid beast!
Gesendet von meinem Nexus 6
Click to expand...
Click to collapse
Glad to hear!
Yasharkhan said:
@The Flash Looks great, will it improve battery? And what kernel settings do you recommend for a 4 hrs sot?
Click to expand...
Click to collapse
It should, I've added a lot of optimization packages. The default settings should be getting you more than 4 hours of SOT but you may try tweaking the governor and hotplug settings.
Running & sleeping well on the 10/10 build of Uberstock. Thanks for sharing your work!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DISCLAIMER
I will not be held responsible for anything that happens to your device after flashing this kernel. If you don't know how to bring your dead device back to life please don't make any modifications and stay with stock MIUI. This is only meant for advanced users.
Zetsubou(aka Despair) kernel is meant to be simple with only cool features added on top of CAF/CM kernel. Kernel source will always be kept in sync with new caf(LA.BR.1.2.9_rbx.xx) and mainstream linux(3.10.y) updates. It will never include features like Undervolt, Quick charge and other potentially dangerous/unstable stuffs. Okay enough of the intro let's move on to the features
Features:
*linux version 3.10.107
*CPU/GPU overclock support upto 1.8GHz/620MHz
*based on caf branch LA.BR.1.2.9_rbx.xx(rb1.24 as of now)
*updated prima drivers(LA.BR.1.2.9_rb1.23)
*HID usb keyboard/mouse support
*sound control
*wake gestures: doubletap2wake, sweep2wake
*sweep2sleep support
*governors: interactive, ondemand, conservative, performance, chill, relaxed, impulse, bioshock and despair
*I/O schedulers: sio, deadline, fiops, noop, bfq, cfq, fifo, sioplus, vr, tripndroid and zen
*custom voltage control
*adreno idler
*adreno boost
*KCAL advanced color control
*DriveDroid support
*advanced TCP congestion algorithms
*disabled crc check
*force fast charge support
*FS: exfat, NTFS & sdcardfs support
*ext4 FS backport from linux-3.18
*f2fs backport from linux-4.13-rc2
*reduced load average
*fsync on/off support
check my source for other features
Use EX KERNEL MANAGER to control all features
Installation:
*Download the zip file and save it into the root directory of internal/external storage
*Reboot to recovery mode and flash the zip file
*Reboot device
It's recommended to flash ZETSUBOU only over stock kernel
Kernel will boot with my recommended settings. Users just need to set their sound control and gestures.
Kernel will boot with stock CPU/GPU frequencies of 1.2GHz/465MHz
DOWNLOAD
Credits:
@ketut.kumajaya hats off to this man for all the work he did for R2
@osm0sis for his amazing AnyKernel2 script
@flar2 for his awesome features
Need a guide to compile ZETSUBOU from source?
- head over here
XDA:DevDB Information
Zetsubou Kernel, Kernel for the Xiaomi Redmi 2
Contributors
Ashish94, ketut.kumajaya, premaca, nicknitewolf
Source Code: https://github.com/AshishM94/android_kernel_wingtech_msm8916
Kernel Special Features:
Version Information
Status: Stable
Stable Release Date: 2017-08-30
Created 2016-12-17
Last Updated 2017-08-30
nice work dev ....
Works on Miui L ?
Ashish94 said:
DISCLAIMER
I will not be held responsible for anything that happens to your device after flashing this kernel. If you don't know how to bring your dead device back to life please don't make any modifications and stay with stock MIUI. This is only meant for advanced users.
Zetsubou(aka Despair) kernel is meant to be simple with only cool features added on top of CAF/CM kernel. Kernel source will always be kept in sync with new caf(LA.BR.1.2.9_rbx.xx) and mainstream linux(3.10.y) updates. It will never include features like Undervolt, Quick charge and other potentially dangerous/unstable stuffs. Okay enough of the intro let's move on to the features
Features:
*linux version 3.10.104
*CPU/GPU overclock support upto 1.8GHz/650MHz
*compiled with my gcc 4.9.4 toolchain using crosstool-ng (source: https://github.com/AshishM94/crosstool-ng)
*based on caf branch LA.BR.1.2.9_rbx.xx(rb1.9 as of now)
*updated prima drivers(LA.BR.1.2.9_rb1.9)
*HID usb keyboard/mouse support
*sound control
*wake gestures: doubletap2wake, sweep2wake & sweep2sleep
*governors: interactive, ondemand, conservative, performance
*I/O schedulers: sio, deadline, noop, bfq, cfq and zen
*KCAL advanced color control
*DriveDroid support
*advanced TCP congestion algorithms
*disabled crc check
*f2fs updated upto V4.10
*reduced load average
*frandom support
*fsync on/off support
check my source for other features
Use EX KERNEL MANAGER to control all features
Installation:
*Download the zip file and save it into the root directory of internal/external storage
*Reboot to recovery mode and flash the zip file
*Reboot device
It's recommended to flash ZETSUBOU only on top of stock kernel
Kernel will boot with my recommended settings. Users just need to set their sound control and gestures.
Kernel will boot with stock CPU/GPU frequencies of 1.2GHz/465MHz
DOWNLOAD
Credits:
@ketut.kumajaya hats off to this man for all the work he did for R2
@osm0sis for his amazing AnyKernel2 script
@flar2 for his awesome features
XDA:DevDB Information
Zetsubou Kernel, Kernel for the Xiaomi Redmi 2
Contributors
Ashish94, ketut.kumajaya, premaca, nicknitewolf
Source Code:https://github.com/AshishM94/android_kernel_wingtech_msm8916
Kernel Special Features:
Version Information
Status: Stable
Stable Release Date: 2016-12-17
Created 2016-12-17
Last Updated 2016-12-17
Click to expand...
Click to collapse
Work Android 7.0?
andreymixmax said:
Work Android 7.0?
Click to expand...
Click to collapse
yes.
aicp 7.1 works.. thanx..
also working fine in mm roms
Wow f2fs. good kernel
does it work on latest Tesla rom?
Really small question, does Kernel Adiutor work?
Cuz Ex kernel thing is a paid app
Hatsoff
Nice work developer, Loved it
potlapalli1 said:
also working fine in mm roms
Click to expand...
Click to collapse
I knew it would work. Can you check if WiFi works?
taalojarvi said:
Really small question, does Kernel Adiutor work?
Cuz Ex kernel thing is a paid app
Click to expand...
Click to collapse
Um No. 1st I'm using a different sound control driver, 2nd there are way too many issues with wake gestures specially dt2w like your half/full screen and 3rd you get what you pay for - a simple, clean & beautiful UI with right selection of features.
Sent from my Redmi Note 3 using Tapatalk
Work MM?
xander21 said:
Work MM?
Click to expand...
Click to collapse
Yes just installed in mm.. Everything works including wifi.. you have to install Ex kernel app to control soundbif you want.. kernel auditor is not showing sound control option
abhianand123 said:
Yes just installed in mm.. Everything works including wifi.. you have to install Ex kernel app to control soundbif you want.. kernel auditor is not showing sound control option
Click to expand...
Click to collapse
Just asking. Im use nugat ROM
Wysłane z mojego 2014811 przy użyciu Tapatalka
I knew it would work. Can you check if WiFi works?
using with nx mm rom everything is working fine wifi also
f2fs support system partition?
Kimikz said:
f2fs support system partition?
Click to expand...
Click to collapse
Yes
Wysłane z mojego 2014811 przy użyciu Tapatalka
Ashish94 said:
I knew it would work. Can you check if WiFi works?
Um No. 1st I'm using a different sound control driver, 2nd there are way too many issues with wake gestures specially dt2w like your half/full screen and 3rd you get what you pay for - a simple, clean & beautiful UI with right selection of features.
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
Thanks for the explanation
Would you mind adding the despair governor,it seems to bring more battery life and stability to our device.
WarningI will not be responsible for anything that happens to your Redmi 2 after flashing this kernel. If you don't know how to unbrick your phone please don't make any modifications and stay with stock MIUI.
What is HexaTurbo?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
HexaTurbo kernel is meant to be the best gaming kernel with awesome Zetsubou features added on top of CAF/CM kernel. Kernel source will always be kept in sync with new caf(LA.BR.1.2.9_rbx.xx) and mainstream linux(3.10.y) updates. For now the kernel dosn't include features like Undervolt and other features.
Zetsubou
This kernel is 100% based on Zetsubou kernel, that is the best performance/stability balance for redmi 2! So all new Zetsubou features will be added and optimized much as possible to deliver the best performance for Root and Non-Root users, what? non-root users? yes! this kernel was made to be used without root! so you can get the max performance in your games without using Kernel adiutor or EX kernel manager!! (cof... cof.... Pokemon GO)
Features:
NEON optimization
linux version 3.10.105
compiled with UBER GCC 4.9
GPU TurboClock support upto 620MHz
based on caf branch LA.BR.1.2.9_rbx.xx
General optimizations
True 1.2ghz clock
wake gestures: doubletap2wake, sweep2wake (up,down,left,right)
sound control for root users (not tested)
sweep2sleep support!
I/O schedulers: sio, deadline, fiops, noop, bfq, cfq, fifo, sioplus, vr, tripndroid and zen
governors: interactive, ondemand, conservative, performance, chill, relaxed, impulse, bioshock and despair
hotplug: lazyplug
KCAL advanced color control
adreno idler
DriveDroid support
advanced TCP congestion algorithms
force fast charge support
disabled crc check
FS: exfat, NTFS & sdcardfs support
f2fs updated upto v4.10-rc1-3.10
frandom support
reduced load average
fsync on/off support
Check my and Ahish source for other features
-- Download Now --
-- 2017 NewGen Logo Download --
Use EX KERNEL MANAGER or KERNEL ADIUTOR to control all features
Installation:
-Download the zip file and save it into the root directory of external storage
-Reboot to recovery mode and flash the zip file
-Reboot device
It's recommended to flash HexaTurbo only over stock kernel
I recomend using Custom installation for better choices, since you are a gamer!
Kernel will boot with max CPU/GPU frequencies that you select, ex: 1.21GHz/620MHz
Credits:
-ketut.kumajaya hats off to this man for all the work he did for Redmi 2
-osm0sis for his amazing AnyKernel script
-flar2 for his awesome features
-Ashish94 for helping me in almost everything!
-iamsubhranil for also helping me out!
XDA:DevDB Information
[Kernel][N-M][UBER-GCC][NewGen] HexaTurbo 2017, Kernel for the Xiaomi Redmi 2
Contributors
TecnoTailsPlays, Ashish94, iamsubhranil, All devs from kernel guides and mods
Source Code: https://github.com/TecnoAquaPlays/android_kernel_wingtech_HexaTurbo/tree/master
Kernel Special Features: This kernel is optimized for gaming, make your redmi 2 better and cooler!
Version Information
Status: Stable
Current Stable Version: 20170312
Stable Release Date: 2017-03-13
Created 2017-02-09
Last Updated 2017-03-24
Changelog 20170313 NewGen
-Fix random reboots on 2014819
-Stock CPU clock 1.21ghz (1.8ghz or 2.1ghz are fake overclock)
-Add KSM
-Sync Zetsubou sources
-Add F2FS & SDCARDFS support <---| Check Zetsubou thread for how to format to thease file system's
-LineageOS source
-Many other optimizations
Changelog 20170212 Equalizer
-Remove Fake CPU clocks
-Remove fake overclock to 2.11ghz and go back to "Supported 1.3ghz"
-Optimized aroma installer
-Minor things
GPU overclock is Real, and all clocks too, so I din't change anything for now
Changelog 20170210-something
-Totally new freequency table for GPU/CPU, you will get way smoother UI and games
-Minor fixes
Changelog 20170210-Fix
-Switch back to UBER gcc 4.9 becouse some issues with CPU
-Optimize aroma installer a little bit
-Testing new CPU overclock code
-Other minor stuff
Changelog 20170210
-Switch to UBER gcc 6.0
-Enable -O3 optimization
Changelog 20170209:
-Initial build
Can I flash with custom rom like AOSP?
Can i flash it on Validus?
Sent from my 2014813 using Tapatalk
Yousef Algadri said:
Can i flash it on Validus?
Sent from my 2014813 using Tapatalk
Click to expand...
Click to collapse
Sure, if it din't work, sent me dmesg and logcat
zmanz79 said:
Can I flash with custom rom like AOSP?
Click to expand...
Click to collapse
I'm not sure, since this kernel is for cm based roms, you can give it a try....
Good job, my Redmi 2 is fast. Amazing! I'm using mokee 7.1 nitghly 20170207
no sim cards detected after flashing the kernel but on dirty flashing the rom it gets detected.the rom is RR N latest .
Yeah techno is doing awesome work
AOSPExtended..
Custom installation not work for CPU and Color Control. I have to manually adjust all the setting on each reboot. Especially for CPU control, it need time to get 2112 , it keep lock down to 800 on each reboot. Anyway good performance .
bro 2.11 ghz for cpu...... wtf... cool man... installing it right away
Could you add another Hotplug? AutoSMP would be nice
taalojarvi said:
Could you add another Hotplug? AutoSMP would be nice
Click to expand...
Click to collapse
I will try
New build is out!
-Switch to UBER GCC 6.0
-Enable -O3 optimization
New features will be added in future builds, becouse I need time to test other -unstable- features
DOWNLOAD
TecnoTailsPlays said:
New build is out!
-Switch to UBER GCC 6.0
-Enable -O3 optimization
New features will be added in future builds, becouse I need time to test other -unstable- features
DOWNLOAD
Click to expand...
Click to collapse
Work in AOSP EX ?
andreymixmax said:
Work in AOSP EX ?
Click to expand...
Click to collapse
Look, I only use LineageOS, so I can't test in others roms, you will have to try by yourself
LOL, if someone is using the kernel, please open CPU-Z and kernel adiutor and sent me a screenshot of the freequencyes, I think the UBER 6.0 glitched the kernel
New build online!!
-Fix weird stuff on CPU-Z and other apps
-Switch back to UBER gcc 4.9 becouse CPU problems
-Edit aroma installer picture time
-Optimize CPU overclock code (Report if you had random reboots only with this kernel in LineageOS)
--DOWNLOAD--
@TecnoTailsPlays
Whilst testing your new update, I realized that the UI was really laggy. So I checked my frequencies and governor via KA and found out that the max frequency was capped at 800 mhz.
I tried changing frequencies and the frequencies wouldn't stick. If I tried raising it to 1209, it would bounce back to 800.
I tried changing governors too. Unfortunately issue didn't have a workaround so I Reverted to Zetsubou
My modem is 2014818 and I have the 1Gb Variant. I run AiCP 12.1
taalojarvi said:
@TecnoTailsPlays
Whilst testing your new update, I realized that the UI was really laggy. So I checked my frequencies and governor via KA and found out that the max frequency was capped at 800 mhz.
I tried changing frequencies and the frequencies wouldn't stick. If I tried raising it to 1209, it would bounce back to 800.
I tried changing governors too. Unfortunately issue didn't have a workaround so I Reverted to Zetsubou
My modem is 2014818 and I have the 1Gb Variant. I run AiCP 12.1
Click to expand...
Click to collapse
Did you try the latest build? this was fixed