Helloooo,
I have a big problem, cant get my phone running again.
The sad thing is, I just got it 4 hours ago
So heres what I have done to my Phone:
I rooted it with Kingo-Root and then installed a app where TWRP was listed, there also was CWM and stuff and I thought I have to flash my phone there with TWRP to install a new ROM and stuff and I clicked there on flash.
Then it asked me if I want to restart in, I cant remember recovery and/or download mode, I clicked yes and from there the trouble began.
When it starts the Coolpad Logo appears, then it say "Download and install the package?", to confirm volume up, to abort volume down. If I press abort, it just goes off, the restart may leads to the battery charging screen ( usb cable is always connected!!), if I press volume up, it says "Information - Do not disconnect data cable", but it says it for forever, nothing happens.
If data cable isnt connected, it shows Logo and then goes off, doesnt do anything.
I wish I would have never done that, Im too stupid for stuff like that.
Can someone help me out?
Hopefully
Hi are you able to enter in TWRP recovery in orden to try to flash him back to stock rom ?
Sadly no
I read some stuff on the internet, and tried it:
I installed andoid studio on my PC, with all that drivers, connected the Phone to my PC and looked it up in the device manager.
Before it was just recognized as "Other devices - Android" without any information, now I had the Hardware ID and put that into the setup text of Google drivers and installed them.
My PC somekind recognizes the phone. (but not like normally)
Maybe i can get the Stock Rom to phone that way somehow?
Edit: its called adb interface in device manager
Now I tried to set up the stock-rom via YGDP, and well, it kinda worked.
Im now out of this mode.
If I start the phone it makes its starting sound and it response to "key"-presses by vibrating, but, no screen, its just pitch black.
Its not listed in device-manager anymore.
Any suggestions?
bad support.
Paskebe said:
Now I tried to set up the stock-rom via YGDP, and well, it kinda worked.
Im now out of this mode.
If I start the phone it makes its starting sound and it response to "key"-presses by vibrating, but, no screen, its just pitch black.
Its not listed in device-manager anymore.
Any suggestions?
Click to expand...
Click to collapse
Bad support for this phone...
My is dead after 20 days .
Paskebe said:
Now I tried to set up the stock-rom via YGDP, and well, it kinda worked.
Im now out of this mode.
If I start the phone it makes its starting sound and it response to "key"-presses by vibrating, but, no screen, its just pitch black.
Its not listed in device-manager anymore.
Any suggestions?
Click to expand...
Click to collapse
That is probably because you flash incompatible firmware which does not recognize display of your device .
Search on the internet for another genuine rom and repeat flashing process .
I had alsmost same issue when I flashed Blu Studio D572i with rom of D572a as I remember , was black screan completely but buttons are working (showing light) .
Related
So I rooted my HTC ONE S (villec2) today, and I wanted to flash a custom rom on it. I got a recovery (turned out to be a bad one, but it worked either way.... I noticed way too late it was made for HTC One M8) I got TWRP 2.7.1.0 and I got it working on my phone. I then backed up the system, and realized I messed up the recovery. In the meantime I got a CM 12.1 img on it and wiped the thing. The wipe removed the old Android system and the CM I downloaded was a bad download. If I go to recovery in the bootloader, it will just do the HTC white screen with "Entering Recovery" and the red warning logo but it won't get anywhere. It's just stuck there. So now, I'm stuck with a device that won't boot normally - just stuck on the white HTC screen, will boot into bootloader, and I want to know if there's a way of accessing the internal storage without being in the operating system. The worst thing is, there's no external SD Card, all just internal... Please god help me. I'm really stressing out about this since it's the only phone I have and if I lose it.... well I'm practically f-ed.... :crying: I know that I messed a few things up really badly and I'm not sure what state the phone is in.
Also just to add, the phone is barely loading up right now. I'm really scared since it's my only phone and it won't even boot normally right now. It's really acting strange, it was on 90% battery but now it might just be dead... i don't know.... someone please help
I honestly think I screwed it up.... All it does now is just a white flash / flicker when I hold the power button (both only power button and vol down) and that's it. I'm really disappointed right now but oh well.... Maybe just because the battery is not charged.... Also been looking around the other threads and looks like a lot of people had the same issue but with 0 replies...
hi friend
i ve bricked a phone once and i recover it with flashing stock rom
did you try the stock rom ?
cazawiman said:
hi friend
i ve bricked a phone once and i recover it with flashing stock rom
did you try the stock rom ?
Click to expand...
Click to collapse
I have no way of trying the stock rom. I cannot access the phone itself because I deleted the OS. There's a weird thing, that if I plug the USB to the computer, it does the connect windows sound but the phone's internal storage is still not accessible.... So as it turns out I can get to the freaking bootloader but then it just turns off with a white flicker a second later.... I have no clue what to do :crying:
try to hook your device with windows and hold the Volume Down and Power
to see if it can detect it
cazawiman said:
try to hook your device with windows and hold the Volume Down and Power
to see if it can detect it
Click to expand...
Click to collapse
Alright. I slept through the night and now I'm here trying to resolve this again. Status now, is that when I try to boot it up, it just shows a white flicker and won't turn on. no matter if i try to boot in bootloader or normally. The device doesn't appear to be charging when I plug it in because it doesn't show the LED light for charging. I think it's hard bricked. I tried other threads, showing bright light to the proximity sensor, but nothing happened.
//edit// - My bootloader was unlocked, and I was on S-ON (HTC ONE S, S3 villec2) that might change on your phone and might make the process different
So I fixed it. I will leave the tutorial for anyone in the future that might be having the same issue. If you "locked yourself out" of your system, eg. no OS, and broken recovery just plug it into the computer, try somehow getting into bootloader, go into fastboot and plug the usb cable to your computer so you're in Fastboot USB. Then you can flash a recovery on the phone using a fastboot command. I believe it's fastboot flash recovery _filename_. Just google that, there'll be plenty. Then you have the recovery and you're back on track. After that you can get the rom you wanted. Just don't make my mistake, and check if your device is exactly the same as the files you're downloading for it. I messed up there . Anyway, good luck everyone!
t
yea
Happy to hear that u have fixed your phone add "solved " to the title and add a fast tutorial for help purpose
Sent from my thl T6 pro using XDA Free mobile app
So first off, here is what i know about my device.
Samsung Galaxy S4
SCH-I545VRUGOC1
I installed TWRP because i guess i had no idea what i was doing, and locked myself out of my recovery mode, then tried to fix that by flashing the stock rom which didn't work either.
when booting this is what happens.
Recover - Nothing
Odin/Download mode - Works.
Power only - boots to black screen that says "Samsung Custom OS" then the screen turns black, blue LED comes on and it doesn't restart or turn off, it just seems to be frozen. (I expect this is because i've attempted to flash multiple times thinking the issue was my cable connection)
no idea what to do now, can't boot can't think straight since i've been at it for hours finding things on these forums but nothing seems to work through odin.
Can't download VZW Repair assistant (no online link, and phone wont recognize through my pc)
samsung kies wont recognize it either.
Help?
Need any info, ill be at my computer for a few hours trying to hash this out.
-Don't care about my data on the phone, it's replaceable.
Thanks.
Fixed it Via SmartSwitch
Was able to recover all of the aforementioned.
Hello, i have encountered a problem with my rooted SGS4 i9505 (I'm new to xda and don't really know if this question is supposed to be placed in here so forgive me for that)
I have been using this phone with a nightly build of cm13 6.0.1 and there were absolutely no problems and it was great but today i wanted to update to another nightly build so i downloaded it and in the developer's option i checked that the phone would also get a custom recovery that, comes with the rom i think, installed and it rebooted to update the rom. Then the screen just went black , i waited a minute but it still didn't boot so pressed down the power button in hope to boot up in android again but instead it started booting into recovery but after the blue text in the left-top corner appeared the screen went black again. If i plug the phone in to charge it starts vibrating with intervals of about 3-5 seconds and never boots, no logo or even text is displayed, the screen is just black.
So i can't boot into android nor the recovery, only in download mode, and odin also doesn't recognise the phone
If someone could help that would be very much appreciated, thank you.
(I'm not a native english speaker, so please forgive me if there are any mistakes)
If you can get into Download Mode, then it's a matter of making sure the correct drivers load for Odin to see it. Check your Device Manager on your PC. Even if the PC has connected with it before and loaded the correct drivers, sometimes you have to manually point it in the right direction again. Messing up the recovery should not affect the Download Mode. Once you get the computer to recognize it again, then I would use Odin to reload TWRP recovery and you should be able to boot into recovery and do what you need to do. If recovery is still messed up, then you might need to reinstall the original firmware and start over.
es0tericcha0s said:
If you can get into Download Mode, then it's a matter of making sure the correct drivers load for Odin to see it. Check your Device Manager on your PC. Even if the PC has connected with it before and loaded the correct drivers, sometimes you have to manually point it in the right direction again. Messing up the recovery should not affect the Download Mode. Once you get the computer to recognize it again, then I would use Odin to reload TWRP recovery and you should be able to boot into recovery and do what you need to do. If recovery is still messed up, then you might need to reinstall the original firmware and start over.
Click to expand...
Click to collapse
Didn't think someone would reply this fast heh. But anyways, I totally forgot about drivers! I thought i had them still installed but i recently did a fresh install of Windows 7, thank you very much, everything works now.
Awesome! Glad all is well.
I ran into a serious problem and now I do not know how to fix it. It turns out that I wanted to install a rom to my cell phone, since the stock I had was giving problems with the battery indicator, and I tried to calibrate it and even used others also following different steps to calibrate them, but always the same problem; Well, after root I found the problem that I could not install anything from the recovery mode of the cell phone, there was a problem that was disabled and could not from the sd, or internal, or adb or anything. Finally I decided to find an application to install twrp and flash the rom, downloaded flashify and I did.
When I went into recovery to flash the rom the cell phone did not change the logo with the message in a corner that is not the official recovery as always comes out when a custom is installed. And there it stays.
I can not turn it on normally, because each time I turn it on it goes directly to the logo with the message that it is not the original recovery, as if trying to access the recovery.
PS: I can not use odin, it does not recognize the cell phone when it is in odin mode, since all the drivers are installed and the kies, I reinstalled everything 3 times every time I tried it. And I can not enter odin mode, and the home button does not work, I used adb, but since it does not turn on, it does not recognize it either.
alberto1251 said:
I ran into a serious problem and now I do not know how to fix it. It turns out that I wanted to install a rom to my cell phone, since the stock I had was giving problems with the battery indicator, and I tried to calibrate it and even used others also following different steps to calibrate them, but always the same problem; Well, after root I found the problem that I could not install anything from the recovery mode of the cell phone, there was a problem that was disabled and could not from the sd, or internal, or adb or anything. Finally I decided to find an application to install twrp and flash the rom, downloaded flashify and I did.
When I went into recovery to flash the rom the cell phone did not change the logo with the message in a corner that is not the official recovery as always comes out when a custom is installed. And there it stays.
I can not turn it on normally, because each time I turn it on it goes directly to the logo with the message that it is not the original recovery, as if trying to access the recovery.
PS: I can not use odin, it does not recognize the cell phone when it is in odin mode, since all the drivers are installed and the kies, I reinstalled everything 3 times every time I tried it. And I can not enter odin mode, and the home button does not work, I used adb, but since it does not turn on, it does not recognize it either.
Click to expand...
Click to collapse
To enter in to the download mode you can use JIG USB which looks like this :
https://images-na.ssl-images-amazon.com/images/I/41MhETGCbBL.jpg
You can buy that jig USB on E-Bay
or you can use this tool but little Warning !!!
https://app.box.com/s/ktb9rzxde78lujqioh3rbmh6w39gedmm
File was scanned against viruses and it has some , maybe because like that he make your device in download mode.
https://www.virustotal.com/sr/file/...33ff7dceef468c2e8c325d79c7ad43fc8c1/analysis/
Here is video how to use .
https://www.youtube.com/watch?v=2er95HkiJbo
Good Luck
I'll try with the usb jig. Still don't know if buy the resistance and make one or just buy the jig. Then i will see if i can get for odin to detect the phone, using some kind of witchcraft or whatever hahahaha.
Thanks, I will set the thread as solved.
Good Luck
Hello community,
I haven't posted here before, so I hope I'm not doing anything wrong.
I have a problem with my Neffos X1 and after browsing the internet for hours nothing helped so far, so I hope some of you can help me out.
My phone is stuck in a bootloop since yesterday evening. I haven't done any updates or new installations recently, so it just happened out of the blue. It loads till the Neffos logo and then restarts over and over again.
Since I can't take the battery out, I tried letting it run out of energy and then restart, but as soon as I connect it to a power source the bootloop will start again.
I read a lot about getting it in recovery mode or to try and flash it, but no matter what combination of buttons I try, nothing is happening. The phone basically doesn't react to anything and just keeps restarting. The only thing I noticed is, that when pushing both volume keys the screen will just stay black (no restarting), but after letting go the bootloop will start again.
I tried flashing it via SP Flash Tools, but the phone also doesn't react to it.
Lots of troubleshooting guides also require, that I have rooted my phone in the past, unfortunatly I haven't. I also read about unlocking the bootloader, but since my phone isn't reacting to any buttons and my laptop also doesn't seem to recognize my phone (probably because it doesn't boot proberly), that doesn't seem like a solution either.
To summarize: I'm stuck in a bootloop with no recovery mode, no rooting, no unlocking bootloader, probably can only use my laptop to do anything remotely.
So, is there anything you can think of, that might help me get out of the bootloop? Or ideas of what I may did wrong when trying the other solutions?
Thanks for any help in advance.
Same problem
I have the same problem, I have tried all kinds of soft reset and nothing is working I also opened the phone to check if anything was not connected properly, but everything seems fine except for that infinite loop. Please help!
Shotzo said:
I have the same problem, I have tried all kinds of soft reset and nothing is working I also opened the phone to check if anything was not connected properly, but everything seems fine except for that infinite loop. Please help!
Click to expand...
Click to collapse
Try this
Download phone's Stock Firmware onto your personal computer.
Install the USB MTK Drivers - NOT ANY OTHERS (skip if you have them already installed).
Download and Launch the Smart Phone Flash Tool (SP Flash Tool)
Click the Scatter-loading button to navigate to the Stock Rom you just downloaded.
Select the Scatter File from the extracted Stock Firmware on your computer.
Select the Download Only in the SP flash tool option
Click the Download button to start the Formating process.
Connect your phone via USB to the computer>> holding volume + and volume – button of your phone at the same time or holding power button only so that the flashing process will starting working
Patiently wait for your device to be formatted.
After the formatting is done, a Big Green button will pop up on the SP Flash to show that.
Unplug phone and boot it up.
If you have a boot loop after booting your device, boot into recovery mode and do a factory reset.
Voila, you are all good.