Help! SM-T377P Hard bricked, need debrick.img - Android Q&A, Help & Troubleshooting

After downgrade from Nougat to Lollipop it not turn on, no download, no recovery.. no way to revive it whitout your help!
If you have an SM-T377P, i need your help to unbrick mine, you only have to flash this file View attachment T999_Partial_Sys_Dump_for_debrick.zip in twrp mode, this is completlly safe, after that you will find a file "debrick.img" (128mb) on your sdcard, this is what i need to fix my tablet, you can upload or attach here. please, it takes only 2 minutes, you will be helping me a lot. Thanks to @DocHoliday77 thread https://forum.xda-developers.com/showpost.php?p=45725480 for this debrick method
TWRP: View attachment twrp-3.1.1-1-gtesqltespr.img.tar

I have this thing laying around a decided "why not"
https://drive.google.com/file/d/1cPYFf4o6S4hQkdYhrkv2R_oW22uFeKav/view?usp=drivesdk

Thisisabadname said:
I have this thing laying around a decided "why not"
https://drive.google.com/file/d/1cPYFf4o6S4hQkdYhrkv2R_oW22uFeKav/view?usp=drivesdk
Click to expand...
Click to collapse
hi first of all thanks for the help! file dont work
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
which android version have your tablet?

hernankano said:
hi first of all thanks for the help! file dont workwhich android version have your tablet?
Click to expand...
Click to collapse
Oh, I'm using the Lineage build you posted in. 7.1.2

Thisisabadname said:
Oh, I'm using the Lineage build you posted in. 7.1.2
Click to expand...
Click to collapse
I was on stock nougat 7.1.1, the debrick.img must made in same version.. thanks anyway bro

hernankano said:
I was on stock nougat 7.1.1, the debrick.img must made in same version.. thanks anyway bro
Click to expand...
Click to collapse
Wait, there's a stock nougat for the T377P?

Thisisabadname said:
Wait, there's a stock nougat for the T377P?
Click to expand...
Click to collapse
sure, here you can download it: http://updato.com/firmware-archive-select-model?record=38A2609CB47711E7963AFA163EE8F90B or https://www.sammobile.com/firmwares/galaxy-tab-e/SM-T377P/SPR/download/T377PVPU3CQI4/192072/
if you decide to flash this, please helpme with the debrick.img again:laugh:

I have sm 377w that the same thing has happened to I tried to bypass by following instructions on here I flashed a combo rom it to a screen that said binary something. So the next step was to factory reset dis that and then the samsung logo came up and it shut off. Would your method work to get a Derrick.img file. I have the exact same tablet that I can try on. I just don't want to be stuck with two bricks.

I know this is 5 year old post but if anyone stumbles on this thread, here is the debrick.img taken from a SM-t377w.
Just rename it debrick.img cause chrome renames it ands [1] to the name.

Related

Help required to unbrick!

So I got this after a blunder with Odin.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It was fine till I downloaded Odin 1 Click download.
After that, the ohone simply won't turn on!!
Whats wrong? And What to do next?
forced download, the device is begging you to flash something.
Plug it in, odin it, and make sure you are flashing the RIGHT ROM for your device's model.
Sent from the little guy
gastonw said:
forced download, the device is begging you to flash something.
Plug it in, odin it, and make sure you are flashing the RIGHT ROM for your device's model.
Sent from the little guy
Click to expand...
Click to collapse
The phone isnt turning on & Odin is unable to pick up the phone. No COM detection.
And how did you get that image you posted?
Sent from the little guy
gastonw said:
And how did you get that image you posted?
Sent from the little guy
Click to expand...
Click to collapse
copied link from another thread.
alisiddiqui said:
copied link from another thread.
Click to expand...
Click to collapse
lol but you actually had that image in you device?
Sent from the little guy
gastonw said:
lol but you actually had that image in you device?
Sent from the little guy
Click to expand...
Click to collapse
Yes, I did.
Then I downloaded Odin 1 Click, which was suppose to stock ROM it. Instead, created a new problem.
alisiddiqui said:
Yes, I did.
Then I downloaded Odin 1 Click, which was suppose to stock ROM it. Instead, created a new problem.
Click to expand...
Click to collapse
get odin 1.85, kill all kies applications running on background and plug your device (power it first).
And make sure it's charged.
Sent from the little guy

[Q] Custom boot animation goes to black screen

Hi! I'm trying to make my own boot animation (A simple android kitkat logo), but when I put it in /system/media/bootanimation.zip and reboot the phone, it goes to black screen.
I followed the steps described in that guide and read that post, but they didn't share the solution and the mediafire link is dead.
Can anyone help? I'm attaching my current bootanimation.zip
harlandraka said:
Hi! I'm trying to make my own boot animation (A simple android kitkat logo), but when I put it in /system/media/bootanimation.zip and reboot the phone, it goes to black screen.
I followed the steps described in that guide and read that post, but they didn't share the solution and the mediafire link is dead.
Can anyone help? I'm attaching my current bootanimation.zip
Click to expand...
Click to collapse
Here you go brother Recovery is installed
enjoy
jooode said:
Here you go brother Recovery is installed
enjoy
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
Thanks, but I'm not searching for someone that does it for me, I would like to understand why it doesn't work. All files are in the right place, so why it doesn't work?
harlandraka said:
Thanks, but I'm not searching for someone that does it for me, I would like to understand why it doesn't work. All files are in the right place, so why it doesn't work?
Click to expand...
Click to collapse
Zip compression is incorrect
http://forum.xda-developers.com/showthread.php?t=1678540
jooode said:
Zip compression is incorrect
http://forum.xda-developers.com/showthread.php?t=1678540
Click to expand...
Click to collapse
Thanks, but again, I don't want something that does it for me, I want to be able to do it myself.
So, the compression is wrong, which compression should I use in order to make it work?
harlandraka said:
Hi! I'm trying to make my own boot animation (A simple android kitkat logo), but when I put it in /system/media/bootanimation.zip and reboot the phone, it goes to black screen.
I followed the steps described in that guide and read that post, but they didn't share the solution and the mediafire link is dead.
Can anyone help? I'm attaching my current bootanimation.zip
Click to expand...
Click to collapse
Why don't you drag from another to yours? That's the easiest way...

[Q] Bricked Tab3, Help**

Hello,
I successfully rooted my Galaxy Tab 3 (model sm-t110, if that matters), then made a huge mistake. Upon believing that i was going to sell it, i went to settings, and selected to reset phone, foolishly thinking it would take it back to factory/out-of-the-box condition. Now, when i attempt startup, the B&W logo appears repeatedly, followed by this screen with options:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What is the best way to fix this? I prefer to go back to the rooted version, or whichever method is easiest!
Thanks for any help you guys can provide!
RWB
re:
The closest i came is trying to flash? a ROM (i think, my knowledge is obv limited) via SD card. But i think i read error msgs right before the device re-booted...
Thanks again....
RWB
EDIT: microSD, not USB! Dammit
HELP!?
Lil' help please?!
Just point me in the right direction, anything!!
Thanks in advance!
You can download the stock firmware and flash it via Odin. That should restore it back to it's stock unrooted out of the box state
ty
mrao said:
You can download the stock firmware and flash it via Odin. That should restore it back to it's stock unrooted out of the box state
Click to expand...
Click to collapse
Hey, thanks for the reply.
Currently, i dont have access to a PC or laptop. I can borrow one from a friend, if needed...seems like it is a necessity, right??
Thanks again, and if there are any other tips you or anyone can provide, it would be MUCH appreciated!
RWB
Yes. You would need a Windows PC for ODin to work, and the Samsung drivers installed.
RedWhiteBlue
mrao said:
Yes. You would need a Windows PC for ODin to work, and the Samsung drivers installed.
Click to expand...
Click to collapse
Hey thanks for the help...pretty sure once i get my hands on a PC, i can tackle this!
RWB
P.S. Happy late 4th everyone!
Last question, i promise:
Would this be possible with a chromebook??
Thanks again...
RedWhiteBlue said:
Last question, i promise:
Would this be possible with a chromebook??
Thanks again...
Click to expand...
Click to collapse
Not so familiar with chrome books, but I'm guessing, NO
Look around for jODIN3 , it's a web based solution for flashing Odin files...I know for a fact that it works on Mac and Linux..,
You might want to give it a shot and let us know if it works on a chrome book
Here's the link
https://builds.casual-dev.com/jodin3/

[REQ]Stock boot.img and/or ramdisk for Moto E

Hi guys!
I'm trying to build a kernel for Moto E. Although I don't own the device, I really like it and would like to support it in any way I can. For that, you'll have to support me. I need the stock boot.img and/or ramdisk from all variants of the device.
Please provide it as soon as possible so I can get started with the kernel.
Cheers
If I helped you or you like my work please click the
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
button.
newhor1z0n said:
Hi guys!
I'm trying to build a kernel for Moto E. Although I don't own the device, I really like it and would like to support it in any way I can. For that, you'll have to support me. I need the stock boot.img and/or ramdisk from all variants of the device.
Please provide it as soon as possible so I can get started with the kernel.
Cheers
If I helped you or you like my work please click the
button.
Click to expand...
Click to collapse
Attached boot.img for XT1022.
Hetalk said:
Attached boot.img for XT1022.
Click to expand...
Click to collapse
@Hetalk Can you upload it again, please?
Shivam Kuchhal said:
@Hetalk Can you upload it again, please?
Click to expand...
Click to collapse
You need for 4.4.2 or 4.4.4 ?
Hetalk said:
You need for 4.4.2 or 4.4.4 ?
Click to expand...
Click to collapse
4.4.4
I need the one whose ramdisk can be used easily for use with another kernel.
Shivam Kuchhal said:
4.4.4
I need the one whose ramdisk can be used easily for use with another kernel.
Click to expand...
Click to collapse
See this thread for 4.4.4 stock kernel restore zip on the 1st post.
Here's the direct link to the zip file.
You can use boot.img from that file.It's the stock boot.img that I extracted from stock 4.4.4. :good:

[SOLVED] S10+ Clone boot looping after TWRP attempt!

Hello guys, very cool forum! I'm a new B so please bare a little patience
I had a dusty S10+ clone laying around, so I have tried to TWRP it! Unfortunately, did not thought of backing up firmware at first!
Ended up with a non booting phone! I have tried many MTK6580 firmwares with no luck. It is supposed to be a MT6580 With Android 9, but all the firmware I find are SM-G9700 or 9750, when at the back of the phone is written SM-G9600UD. Dont' think this is relevant since the firmwares are tweaked anyway! Finally found 2 firmwares, one with boot sound volume keys sound but white screen and the other one with black screen, no boot no sound but with recovery menu showing up with correct key pressed (not working) but at least I think this LK.BIN works with this screen! I first tried to use the working lk.bin with the booting firmware but then I get a back light on to off loop with no boot! I know some of you can edit the files to make it work but I have no idea an no knowledge how to do that! The stock firmware is supposed to be MT6580_EMMC_samsung_SM-G9600_9_0_ALPS_L1_MP6_V2_19_HCT6580_WEG_A_L_P55 but I only find SM-G9700 or 9750! I have tried a android 7 once for GM9600 but the LK.BIN in this firmware almost fried the screen! So now I am very careful, any ideas would be welcome.
Thanks in advance!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello everyone, just letting you know I have succeeded in rebuilding the stock firmware from 3 firmwares, and will soon be able to release it for FREE over the net!!!
benzduino said:
Hello everyone, just letting you know I have succeeded in rebuilding the stock firmware from 3 firmwares, and will soon be able to release it for FREE over the net!!!
Click to expand...
Click to collapse
You have a link? Misplaced mine and it's been bricked for over a year. Could really use the stock firmware/rom files
Defaul said:
You have a link? Misplaced mine and it's been bricked for over a year. Could really use the stock firmware/rom files
Click to expand...
Click to collapse
Ok let me see how I can arrange that
Defaul said:
You have a link? Misplaced mine and it's been bricked for over a year. Could really use the stock firmware/rom files
Click to expand...
Click to collapse
is there a way for you to send me your email Private

Categories

Resources