[GUIDE] K6-Note-Plus Root-Recovery-Roms - Lenovo K6 / K6 Power / K6 Note Guides, News, & Dis

Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
* if you don't know just do IT.
*/
FIRST STEPS​
1. First of all you must on stock nougat firmware if not click here
2. Unlock your bootloader using this tool here
Or use this in CMD
Code:
adb reboot bootloader
Code:
fastboot oem unlock
Code:
fastboot reboot
3. Set the adb autorization just plug your k6 into PC the run CMD then type this
Code:
adb devices
after that, check your phone then tick the "always allow on this computer" then press "ok"
go back then type this in CMD
Code:
adb devices
if you see your serial number wroted on CMD now your done, go to next steps.
4. Now flash TWRP RECOVERY link here just follow the steps inside of the link. Or you can flash via TWRP APP.
If You are so lazy to do it download this tool
Click to expand...
Click to collapse
Instruction are in inside.
5. Boot into TWRP RECOVERY using long press the 3 buttons.
If you see a prompt message just swipe the ALLOW MODIFICATIONS.
Now we need to decrypt our devices in order to use the DATA.
( CAUTION DECRYPTING DATA WILL ERASE ALL USER'S DATA )
Then go to WIPE section follow this,
Code:
WIPE>FORMAT DATA>Type "yes"
STEPS FOR FLASHING ROM AND MODS
1. Dowload your favorite Custom ROM and other mods here
NOTE:
Code:
K6/power is "karate"
K6 NOTE/PLUS is "karatep"
Download G-Apps in here
Put it on PC storage. (we will erase internal storage)
2. All Custom Rom are in 64bit so you need to download
G-Apps right file,
Code:
7.0 use ARM64 > 7.0 > then your fav's package
7.1.2 use ARM64 > 7.1 > then your fav's package
8.0 use ARM64 > 8.0 > then your fav's package
3. If your favorite ROM and Mods are in the PC storage you can start now.
First WIPE the following,
Code:
WIPE this
Data
Cache
Dalvik
System
Internal Storage
FORMAT DATA
4. Just stay on home interface of TWRP.
Connect your k6 into the PC then Copy the ROMS and MODS into the internal storage.
If you want root just flash magisk 14.x here
5. Go to Install section. (Swipe to flash)
First flash the ROM ( ex. AEX-KARATEP.ZIP ).
Then flash the G-Apps ( ex. gapps.zip ).
Lastly flash the mods you like ( ex. magisk.zip or SuperSu.zip ).
Note:
Code:
Nougat is 7.0.0 and 7.1.2 choose right G-Apps to Flash
If you want to flash xposed this guide will determine what to flash
guide:
7.0 is SDK24
7.1 is SDK25
THANKS TO​@firemax13 (that's me who made this)
@karthick mostwanted (who made all)
@teamwin
@xda
@all developer​
Don't forget to press thanks button!!​If you have a question kindly post a post that you need to solve :highfive::highfive::good:

---

Reserved

---

can we direct root our stock/original rom without using those costum rom.... and how about the modified boot.img

---

telco2016 said:
can we direct root our stock/original rom without using those costum rom.... and how about the modified boot.img
Click to expand...
Click to collapse
If you want to root in stock just FORMAT DATA then flash magisk.zip. No need to modify boot.img.

---

firemax13 said:
If you want to root in stock just FORMAT DATA then flash magisk.zip. No need to modify boot.img.
Click to expand...
Click to collapse
this is the sequence right?
*unlock boatloader
*install twrp
*format/data factory
*install magisk without modying boot.img
am i right... sorry for asking to much question... and thanks for giving time answering my question

---

telco2016 said:
this is the sequence right?
*unlock boatloader
*install twrp
*format/data factory
*install magisk without modying boot.img
am i right... sorry for asking to much question... and thanks for giving time answering my question
Click to expand...
Click to collapse
*Stock nougat
*unlock bootloader
*format data then factory reset ( to decrypt data )
( Only format data and factory reset don't wipe others )
*install magisk14.5 beta (search on xda)
That's all.

---

Hi firemax. I have Lenovo K6 Note but I have a few questions. How I can backup my phone's IMEI, baseband, Mac address and ip address? I know some method but I 'm not sure that it will work. I want to install rom. I had already lost these things and service changed the motherboard and gave new imei, ip address etc. Could you help me about backup these things.

---

ricohket said:
Hi firemax. I have Lenovo K6 Note but I have a few questions. How I can backup my phone's IMEI, baseband, Mac address and ip address? I know some method but I 'm not sure that it will work. I want to install rom. I had already lost these things and service changed the motherboard and gave new imei, ip address etc. Could you help me about backup these things.
Click to expand...
Click to collapse
Sorry but you can search on google how to ----.

---

Hi, will this work on my phone?
Lenovo K53b36
Android 7.0
K53_S225_170811_ROW
Thank's

---

quelox said:
Hi, will this work on my phone?
Lenovo K53b36
Android 7.0
K53_S225_170811_ROW
Thank's
Click to expand...
Click to collapse
Not tested but you can test it but make sure you fully backup your phone.

---

How to use the CMD?

---

Asrk said:
How to use the CMD?
Click to expand...
Click to collapse
Google that

---

New TWRP update just download on official website. If you're using the lazy tool just replace it.

---

@firemax13
Hello. In your older tutorial, you also mention that we need to modify the boot.img. But in this one, it is taken out. I bought this phone recently and I don't want to update to nugat. All I want to do is to install twrp and get root privileges (I will probably just install magisk). So do I need to modify the boot.img or not? Why is it not included in this tutorial but the old one?
Thanks.

---

twilightened said:
@firemax13
Hello. In your older tutorial, you also mention that we need to modify the boot.img. But in this one, it is taken out. I bought this phone recently and I don't want to update to nugat. All I want to do is to install twrp and get root privileges (I will probably just install magisk). So do I need to modify the boot.img or not? Why is it not included in this tutorial but the old one?
Thanks.
Click to expand...
Click to collapse
You can follow the old guide if you are in marshmallow OS ( 6.0.1 ). But please I don't hesitate you if you break your phone ( don't blame on in me if you're gone ). But please backup your phone before doing that risky thing. You can backup your phone by searching on google how to.
I don't include the modify boot.img in this guide because it will cause boot loop or soft brick. In nougat area modifying boot.img can brick your phone. So I don't put the old one to this new one.

---

firemax13 said:
You can follow the old guide if you are in marshmallow OS ( 6.0.1 ). But please I don't hesitate you if you break your phone ( don't blame on in me if you're gone ). But please backup your phone before doing that risky thing. You can backup your phone by searching on google how to.
I don't include the modify boot.img in this guide because it will cause boot loop or soft brick. In nougat area modifying boot.img can brick your phone. So I don't put the old one to this new one.
Click to expand...
Click to collapse
Don't worry dude, I won't blame you if I brick my phone I have been doing this for many years now, don't worry, this is not my first modified android phone.
So I will not modify the boot.img, I will just unlock the bootlader and flash TWRP and Magisk. That is all I am going to do. I already downloaded all the tools necessary to revert back to stock and all. I think I am set. All I need is my new phone now, which hasn't arrived yet Thanks for the answers.

---

twilightened said:
Don't worry dude, I won't blame you if I brick my phone I have been doing this for many years now, don't worry, this is not my first modified android phone.
So I will not modify the boot.img, I will just unlock the bootlader and flash TWRP and Magisk. That is all I am going to do. I already downloaded all the tools necessary to revert back to stock and all. I think I am set. All I need is my new phone now, which hasn't arrived yet Thanks for the answers.
Click to expand...
Click to collapse
make sure you follow correctly the guide!!. Be the force to modify on you. Now it's your time. You can follow the old guide.

---

Can you please provide a link to restore back to stock ROM original AF. the other thread download link is broken

---

AbhiK6 said:
Can you please provide a link to restore back to stock ROM original AF. the other thread download link is broken
Click to expand...
Click to collapse
Search in firmwarefiles.com for stock ROMs for various Phone models.Flashing method is also there![emoji4][emoji4][emoji4]
Sent from my Lenovo K33a42 using Tapatalk

---

Thanks bro i really needed this
---------- Post added at 12:36 PM ---------- Previous post was at 12:34 PM ----------
I didn't use the tool, I used the Command Prompt.