this is a message of the error that I have
my device is a tablet xperia z sgp311
C:\Users\4lph4\Appdata\Local\android\android-sdk\platform-tools>
fastboot devices
CB5A1U3D5J fastboot
fastbot flash recovery twrp-3.0.2-0-pollux_windy.img
Target didn't report max-download-size
sending 'recovery' (10688)
OKAY [ 0,343]
writing 'recovery'
FAILED (remote: Commnand not allowed)
finished, total time : 0.347
I want to use flashtool to do a relock and unlock again but I do not know if that would cause hard brick
novatosuper said:
this is a message of the error that I have
my device is a tablet xperia z sgp311
C:\Users\4lph4\Appdata\Local\android\android-sdk\platform-tools>
fastboot devices
CB5A1U3D5J fastboot
fastbot flash recovery twrp-3.0.2-0-pollux_windy.img
Target didn't report max-download-size
sending 'recovery' (10688)
OKAY [ 0,343]
writing 'recovery'
FAILED (remote: Commnand not allowed)
finished, total time : 0.347
I want to use flashtool to do a relock and unlock again but I do not know if that would cause hard brick
Click to expand...
Click to collapse
I got that problem too with an Experia tablet Z. I used the Xperia Companion's "repair" function (from sonys product support page) to restore my device that was unable to boot.
novatosuper said:
this is a message of the error that I have
my device is a tablet xperia z sgp311
C:\Users\4lph4\Appdata\Local\android\android-sdk\platform-tools>
fastboot devices
CB5A1U3D5J fastboot
fastbot flash recovery twrp-3.0.2-0-pollux_windy.img
Target didn't report max-download-size
sending 'recovery' (10688)
OKAY [ 0,343]
writing 'recovery'
FAILED (remote: Command not allowed)
finished, total time : 0.347
I want to use flashtool to do a relock and unlock again but I do not know if that would cause hard brick
Click to expand...
Click to collapse
tablet z doesn't have separate recovery partititon, so you have to use kernel with built-in recovery (fastboot flash boot twrp-3.0.2-0-pollux_windy.img)
or you can try to install it permanently to FOTA partition.
by typing: dd if=/sdcard/twrp-3.0.2-0-pollux_windy.img of=/dev/block/platform/msm_sdcc.1/by-name/FOTAKernel
is resolved thank you
is resolved thank you
Related
Hi.
After I've tried to install a custom rom, I've done a very big mistake. Now I can't boot the tab, and if I try to go in recovery or wipe data through fastboot i get the fatally error "unrecoverable bootloader error 0x00000000". I haven't any nvflash backup and have the JB bootloader (10.6.1.8). The only thing that works are the APX mode and the fastboot. I'm feeling a very idiot because i bought it yesterday.
Now, what can I do? Dump it and f**k myself? :crying:
Sorry for my bad english, thank you for your help.
I realized I'm screwed. But I've tried something...
When I go run the fastboot mode and delete a partition, for example:
Code:
fastboot erase recovery
works, and after I can run other command. But if I use:
Code:
fastboot flash recovery recovery.img
seems it works, in fact the output is
Code:
sending 'recovery' (5378 KB)...
OKAY [ 2.431s]
writing 'recovery'...
OKAY [ 1.739s]
finished. total time: 4.170s
but it's stucked and I need to reboot manually.
Any idea?
Kito92 said:
I realized I'm screwed. But I've tried something...
When I go run the fastboot mode and delete a partition, for example:
Code:
fastboot erase recovery
works, and after I can run other command. But if I use:
Code:
fastboot flash recovery recovery.img
seems it works, in fact the output is
Code:
sending 'recovery' (5378 KB)...
OKAY [ 2.431s]
writing 'recovery'...
OKAY [ 1.739s]
finished. total time: 4.170s
but it's stucked and I need to reboot manually.
Any idea?
Click to expand...
Click to collapse
I have the same. Im on an ICS bootloader due to having to run nvflash to get it back to that point.
I have fastboot access i can send a recovery image over to it (twrp 2.5 ics.img) however when i reboot it i dont see the recovery!
PLEASE PLEASE PLEASE Someone help
Hello guys,
I tried to root my sony xeperia z4 tablet+ lte and I followed this instruction:
theunlockr.com/2015/09/19/how-to-root-the-sony-xperia-z4-tablet
After I unlocked the bootloader and I did the following step:
"6. Type in the following command into the Command Prompt Window and press Enter:
fastboot flash boot boot.img"
C:\Users\Gmer07\Desktop>fastboot flash boot boot.img
target didn't report max-download-size
sending 'boot' (17056 KB)...
OKAY [ 0.390s]
writing 'boot'...
OKAY [ 0.167s]
finished. total time: 0.562s
does my tablet not start anymore... I dont know what to do.. I bought the tablet this week
syrius007 said:
Hello guys,
I tried to root my sony xeperia z4 tablet+ lte and I followed this instruction:
theunlockr.com/2015/09/19/how-to-root-the-sony-xperia-z4-tablet
After I unlocked the bootloader and I did the following step:
"6. Type in the following command into the Command Prompt Window and press Enter:
fastboot flash boot boot.img"
C:\Users\Gmer07\Desktop>fastboot flash boot boot.img
target didn't report max-download-size
sending 'boot' (17056 KB)...
OKAY [ 0.390s]
writing 'boot'...
OKAY [ 0.167s]
finished. total time: 0.562s
does my tablet not start anymore... I dont know what to do.. I bought the tablet this week
Click to expand...
Click to collapse
Android version ?
Firmware version ?
@AndroPlus kernel version?(make sure you downloaded the correct version for you tablet model: SGP 771 for the LTE)
Windows version
In command prompt Type fastboot Devices, if there is no number the windows driver not correctly installed
After unlocking the bootloader did you make a reboot ? (If so you should not enable MyXperia)
you better follow the advice on Androplus' website
There are different kernels for SONYs ROMs.
You should first update to the latest SONY ROM.
Then flash a recovery (also from Androplus) and then the latest kernel (aka boot.img, easier from recovery).
You also need to flash SuperSU - follow the instructions on Androplus' website.
Hello. Today i tried to flash the phone to the stock ROM twice but it didnt work probably cause unlocked bootloader and custom recovery (TWRP).
So i brick the phone and now i cant access the rom or the recovery. All i can do is access the fastboot mode. I tried to install the new recovery through fastboot but it doesnt work.
I tried the twrp 3.0.2.0 and 3.0.1.0 for yuga.
Code:
C:\Users\Kubo\Downloads\platform-tools>fastboot flash recovery recovery.img
target didn't report max-download-size
sending 'recovery' (10704 KB)...
OKAY [ 0.342s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 0.347s
Tried various of commands that i found on google and this forum but nothing worked. I unlocked the bootloader before when i was installing various of custom roms. Could somehow stock rom affect the bootloader when i was flashing through flashtool ? I tried to only boot the recovery from the img, the command worked but the recovery did not boot.
Code:
C:\Users\Kubo\Downloads\platform-tools>fastboot boot recovery.img
downloading 'boot.img'...
OKAY [ 0.341s]
booting...
OKAY [ 0.033s]
finished. total time: 0.378s
Tried to check the status of bootloader but the command is just showing ... and nothing happend. Tried to get the IMEI through fastboot getvar command but no output is given. Im desperate. Sorry for english not my native language. I'll appreciate all the help.
Hi all,
I have an LG G5 H850. I'm trying to install TWRP using ADB. I've had it previously and it worked fine. I'm pretty sure the bootloader is unlocked. Anyway, when I do "fastboot flash recovery twrp-3.1.1.1-0-h850.img" I get the following output:
target reported max download size of 536870912 bytes
sending 'recovery' (19076 KB)...
OKAY [ 0.431s]
writing 'recovery'...
OKAY [ 0.345s]
finished. total time: 0.781s
To me, that looks as though thats worked fine. Now when I try fastboot boot twrp-3.1.1.1-0-h850.img I get the following:
downloading 'boot.img'...
OKAY [ 0.432s]
booting...
FAILED (remote: unknown command)
finished. total time: 0.456s
Has anyone got any ideas on this?
Same here
I am having the same problem, please help
Had this issue a while back. I resorted to doing complete flash with LGUP to the latest version and then it worked. I had been messing around with various ROMS on different android versions.
lywyn said:
Had this issue a while back. I resorted to doing complete flash with LGUP to the latest version and then it worked. I had been messing around with various ROMS on different android versions.
Click to expand...
Click to collapse
Don't happen to know where I could get a rom that it would work with do you?
Managed to solve this. Flashed the TWRP image using fastboot flash recovery <img> via adb. Then I unplugged from USB, and got into recovery mode by doing power + volume down buttons and quickly release and repress ont he LG logo. Answered yes to both questions and got into TWRP.
Barsbeh said:
Managed to solve this. Flashed the TWRP image using fastboot flash recovery <img> via adb. Then I unplugged from USB, and got into recovery mode by doing power + volume down buttons and quickly release and repress ont he LG logo. Answered yes to both questions and got into TWRP.
Click to expand...
Click to collapse
That is the required way of doing it. You have to boot into recovery after flashing the recovery or it gets reset.
Hi,
Having a similar problem since trying to update my ROM ... and the Magisk install failed. Now I can only get to fastboot, can't get to recovery. And, tried this,
Code:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash recovery twrp-3.1.1-0-h830.img
target reported max download size of 536870912 bytes
sending 'recovery' (18644 KB)...
OKAY [ 0.439s]
writing 'recovery'...
FAILED (remote: unknown command)
finished. total time: 0.461s
Help!?! ... and thanks!
Hello first time here
i am stuck on fastboot
i was following this guide
My complete bootloader unlock and root guide.
So I just got this phone just for fun, it was 75 USD, and went straight to XDA to root it so i can remove some bloat etc. but holy moly i ended up have 10 tabs with different guides open, i have compiled what I did to get this phone rooted. I...
forum.xda-developers.com
i flashed magisk from fastboot after that i fastboot into recovery ...nothink happen its just say the unlock waring and never boot i tried boot into bootloader too didnt fix it .
Please help me its my daily phone
Thank you
deadweiler said:
Hello first time here
i am stuck on fastboot
i was following this guide
My complete bootloader unlock and root guide.
So I just got this phone just for fun, it was 75 USD, and went straight to XDA to root it so i can remove some bloat etc. but holy moly i ended up have 10 tabs with different guides open, i have compiled what I did to get this phone rooted. I...
forum.xda-developers.com
i flashed magisk from fastboot after that i fastboot into recovery ...nothink happen its just say the unlock waring and never boot i tried boot into bootloader too didnt fix it .
Please help me its my daily phone
Thank you
Click to expand...
Click to collapse
Try to flash from fastboot kernel, ramdisk and recovery_ramdisk (EMUI 8.0, right?)
https://mega.nz/file/4w9SWAxS#WlHTqaQBGk31Wi6qohVgwbOEubiS2fnKhHTlMBWe2CY
https://mega.nz/file/4h9wGKIa#VMNFjHk0IfyHBWT5JjiJGKveN4jMt9dCXmyl84D7vlE
https://mega.nz/file/BklwBb6Z#S0ZrfWNik5Wd5R_MO7wmmn9432uAcV8qyyvqxy9VwqU
thanks for fast response i ll try it now
yes i am on 8.0.0
C:\platform-tools>fastboot flash recovery RECOVERY_RAMDISK-ANE-8.0.img
Sending 'recovery' (32768 KB) OKAY [ 0.961s]
Writing 'recovery' FAILED (remote: 'partition length get error')
fastboot: error: Command failed
deadweiler said:
yes i am on 8.0.0
C:\platform-tools>fastboot flash recovery RECOVERY_RAMDISK-ANE-8.0.img
Sending 'recovery' (32768 KB) OKAY [ 0.961s]
Writing 'recovery' FAILED (remote: 'partition length get error')
fastboot: error: Command failed
Click to expand...
Click to collapse
Wrong command
fastboot flash recovery_ramdisk RECOVERY_RAMDISK-ANE-8.0.img
iflash all u send .my device is trying to boot now but its just shows the huawei logo and then again it say the device is unlocked warning
After a lot of bootloops it gave me an option to download latest recovery and firmware so i am downloading it ... You are the best !
Null.