Allcall RIO - No touch after flashing official ROM - Android Q&A, Help & Troubleshooting

Hello all,
I recently bought an allcall rio from gearbest and like any smartphone that comes from gearbest it arrived with some bloatware (google admob) which made the phone terribly slow. Because i had some experience flashing roms on my OPO. I tried to flash a ROM that I found on allcall forum (in which they said was updated and didn't contain any bloatware). I followed their tutorial but touch became unresponsive so now I have to use an optical mouse with OTG cable in order to operate the phone. Later I tried to flash again another ROM, an older one that i found on needROM site but somehow ended having to de-solder the battery to flash "official" rom again. After flashing this last ROM, I was able to use the phone (with optical mouse only) and applied the OTA update available hoping that would solve the touch problem, but it didn't.
This is a MT6580A based phone, with android 7.0.
Appreciate any help

I have similar problem but my LCD is black on my ALLCALL S1 - also after flashing official firmware :/
So i think that for both of us is allcall big NO !

NMPG said:
Hello all,
allcall rio MT6580A based phone, with android 7.0.
Appreciate any help
Click to expand...
Click to collapse
Hi this is for sure firmware problem so try this one to flush but before that Wipe cache partition from recovery .
http://www.mediafire.com/file/cks7q7saekoosc0/AllCall_Rio_MT6580_20170808_7.0.zip
Good luck
---------- Post added at 12:35 PM ---------- Previous post was at 12:32 PM ----------
G_0phy said:
I have similar problem but my LCD is black on my ALLCALL S1 - also after flashing official firmware :/
So i think that for both of us is allcall big NO !
Click to expand...
Click to collapse
Also you can try with another firmware :
http://www.mediafire.com/file/fm6wto42klr4w4d/AllCall_S1_MT6580_20180817_8.1.0.zip
Good Luck

Yeah, that's the one i tried to flash, there aren't any newer versions on internet. I need rom for allcall s1 X <- that X version has newer/different display - uses different drivers, so most likely that's the reason why i have black screen...
Only version on internet : V1.10_20180817 (Don't supports S1 X)
Version i had : V1.3_20180912 (Isn't on the internet, still trying to contact allcall support)
Device name ALLCALL_S1_X (Only in settings-about device, didn't know that it is different than S1, on the box and everywhere else it says S1 without X... )
If there is anybody who could upload that firmware somewhere that would be AWESOME !

G_0phy said:
Yeah, that's the one i tried to flash, there aren't any newer versions on internet. I need rom for allcall s1 X <- that X version has newer/different display - uses different drivers, so most likely that's the reason why i have black screen...
Only version on internet : V1.10_20180817 (Don't supports S1 X)
Version i had : V1.3_20180912 (Isn't on the internet, still trying to contact allcall support)
Device name ALLCALL_S1_X (Only in settings-about device, didn't know that it is different than S1, on the box and everywhere else it says S1 without X... )
If there is anybody who could upload that firmware somewhere that would be AWESOME !
Click to expand...
Click to collapse
I also flashed Teddy Lo ROM with success, but with same result, everything boots fine but still no touch screen... I think I may have messed up the partitions... maybe something persists on some dark corner of phone that doesn't allow to overwrite when flashing new ROMs to get LCD and touch screen drivers...

G_0phy said:
Yeah, that's the one i tried to flash, there aren't any newer versions on internet. I need rom for allcall s1 X <- that X version has newer/different display - uses different drivers, so most likely that's the reason why i have black screen...
Only version on internet : V1.10_20180817 (Don't supports S1 X)
Version i had : V1.3_20180912 (Isn't on the internet, still trying to contact allcall support)
Device name ALLCALL_S1_X (Only in settings-about device, didn't know that it is different than S1, on the box and everywhere else it says S1 without X... )
If there is anybody who could upload that firmware somewhere that would be AWESOME !
Click to expand...
Click to collapse
Hi dude probably your device use MT6582 chip instead MT6580 so try this firmware for MT6582
https://drive.google.com/file/d/1vxACZ6SSpRi-uSsVVWgqvjF3gGEjGBZj/view
password : https://mega.nz/#!2nZGkZAI!-TrXlG1iU0-g7yZkcZGU0FdR68Gw7nUp-5J2bBcKAqY
Hope this is the right one bacause I didn't find any for S1 x so that X sign I think is for S1 clone version which use MT6582 but I'm not sure ...
Let me updated what you have done ... Good Luck

I am assuming you flashed an incorrect/corrupt version of the ROM and the touch drivers might be different in that version. Try finding another version and see if it fixes it.

nkomarn said:
I am assuming you flashed an incorrect/corrupt version of the ROM and the touch drivers might be different in that version. Try finding another version and see if it fixes it.
Click to expand...
Click to collapse
I flashed almost every allcall rio mt6580 ROMs I could find out there with the same result... Don't know what to do anymore

Teddy Lo said:
Hi dude probably your device use MT6582 chip instead MT6580 so try this firmware for MT6582
https://drive.google.com/file/d/1vxACZ6SSpRi-uSsVVWgqvjF3gGEjGBZj/view
password : https://mega.nz/#!2nZGkZAI!-TrXlG1iU0-g7yZkcZGU0FdR68Gw7nUp-5J2bBcKAqY
Hope this is the right one bacause I didn't find any for S1 x so that X sign I think is for S1 clone version which use MT6582 but I'm not sure ...
Let me updated what you have done ... Good Luck
Click to expand...
Click to collapse
No, it's MT6580, phone works, even touchscreen works (talking about S1 X) but LCD drivers are different...

Related

mtk6577 problem driver lcm RX_445HX_495A

Hi,
my clone one x it's unusable, i've flashed a wrong firmware.
I wrote several times to fastcardtech to have the firmware but they said only link wrong ... never again will buy from them, I would add that, as usual, I thought I had bought the phone with the screen 960x540 and instead is a 854x480.
however, for those who want to help, the phone is
IHTC X ONE MTK6577 Dual Core - 4.5 Inch Screen 1.2 GHz CPU Android 4.0 Phone.
the firmware that i need is e1911_v77_jbaol_g20mt9p017fwvga_6628
and the display driver is RX_445HX_495A that is scarce.
i've downloaded a lots of firmware of differnt phones that has the resolution display at 480x854.
http://uptiki.altervista.org/viewer.php?file=c3t9d7srpupgf83tta.jpg
http://uptiki.altervista.org/viewer.php?file=yuvoercgaq5ugcpajoq.jpg
http://uptiki.altervista.org/viewer.php?file=4r9riyzo7aojhp9fca.jpg
someone has LCM :RX_445HX_495A
Diesellolle said:
Hi,
my clone one x it's unusable, i've flashed a wrong firmware.
I wrote several times to fastcardtech to have the firmware but they said only link wrong ... never again will buy from them, I would add that, as usual, I thought I had bought the phone with the screen 960x540 and instead is a 854x480.
however, for those who want to help, the phone is
IHTC X ONE MTK6577 Dual Core - 4.5 Inch Screen 1.2 GHz CPU Android 4.0 Phone.
the firmware that i need is e1911_v77_jbaol_g20mt9p017fwvga_6628
and the display driver is RX_445HX_495A that is scarce.
i've downloaded a lots of firmware of differnt phones that has the resolution display at 480x854.
http://uptiki.altervista.org/viewer.php?file=c3t9d7srpupgf83tta.jpg
http://uptiki.altervista.org/viewer.php?file=yuvoercgaq5ugcpajoq.jpg
http://uptiki.altervista.org/viewer.php?file=4r9riyzo7aojhp9fca.jpg
someone has LCM :RX_445HX_495A
Click to expand...
Click to collapse
Here are some links that may help :
http://forum.xda-developers.com/showthread.php?t=2025122
and http://forum.china-iphone.ru/one-x-one-x-x-1-mtk6577-dual-core-android-4-0-os-3g-gps-t21513.html
Also, you can try using the "Multiport Smartphone Download Tool" to switch between display drivers (in uboot.bin).
wassgha said:
Here are some links that may help :
http://forum.xda-developers.com/showthread.php?t=2025122
and http://forum.china-iphone.ru/one-x-one-x-x-1-mtk6577-dual-core-android-4-0-os-3g-gps-t21513.html
Also, you can try using the "Multiport Smartphone Download Tool" to switch between display drivers (in uboot.bin).
Click to expand...
Click to collapse
Thanks wassgha,
i know sthe two links..... nothing with that driver lcm.
i've download many and many roms that has resolution 480x854 fwvga but all the uboot.img that i've tried dosen't have the correct driver(using MSDT).
thanks again.
ciao
marco
lcm drivers
Diesellolle said:
Hi,
my clone one x it's unusable, i've flashed a wrong firmware.
I wrote several times to fastcardtech to have the firmware but they said only link wrong ... never again will buy from them, I would add that, as usual, I thought I had bought the phone with the screen 960x540 and instead is a 854x480.
however, for those who want to help, the phone is
IHTC X ONE MTK6577 Dual Core - 4.5 Inch Screen 1.2 GHz CPU Android 4.0 Phone.
the firmware that i need is e1911_v77_jbaol_g20mt9p017fwvga_6628
and the display driver is RX_445HX_495A that is scarce.
i've downloaded a lots of firmware of differnt phones that has the resolution display at 480x854.
http://uptiki.altervista.org/viewer.php?file=c3t9d7srpupgf83tta.jpg
http://uptiki.altervista.org/viewer.php?file=yuvoercgaq5ugcpajoq.jpg
http://uptiki.altervista.org/viewer.php?file=4r9riyzo7aojhp9fca.jpg
someone has LCM :RX_445HX_495A
Click to expand...
Click to collapse
hii m also mt6577 user nid sm hlp if u can kernel is 3.0.13 i flashed a jb rom if booted bt screen is pure white may be difrent drivers can u tel wat chages nid to be made

help in MTK 6582 kitkat programing

Hello guys.
I bought a Chinese phone it suppose to be ( Lenovo A8) but when i got the phone i found it where totally different on the Lenovo A8. and it come with android 4.2.2 so i tried to upgrade the phone to 4.4.2. and i found a ROM for CUBOT s208 run on my phone with some problems.
* Camera Not working, even there was no icon for camera.
* No wakeup and air gesture in this ROM but i was have them in my Original ROM.
* Notification light keep working all the time.
MY PHONE SPECS are( 1.3 cpu MTK 6582, 5 inch screen qHD, 8 gb ROM).
is there any programming way to make the phone working 100%.
Or can i get the Camera source code/driver from my Original ROM.
Regards and thanks.
Dose any body have the answer ?
Sent from my iPhone using Tapatalk
Camera is not working because you are using ROM designed for some other device. I dont know what type of ROM you flashed, but you can find out about porting Cynagenmod ROM to your device at Cynagenmod's website :
http://wiki.cyanogenmod.org/w/Doc:_porting_intro
BTW Jumping from one Android version to another just by flashing the ROM is risky business. If the preloader gets overwritten with mismatched type, you can hard-brick the phone.
sudeshkmr said:
Camera is not working because you are using ROM designed for some other device. I dont know what type of ROM you flashed, but you can find out about porting Cynagenmod ROM to your device at Cynagenmod's website :
http://wiki.cyanogenmod.org/w/Doc:_porting_intro
BTW Jumping from one Android version to another just by flashing the ROM is risky business. If the preloader gets overwritten with mismatched type, you can hard-brick the phone.
Click to expand...
Click to collapse
Thanks, i already broke my device and i fixed again. And i don't know what is exactly my device because it is just a Chinese clone.
I am asking a bout a kind of programming way to fix these issues.
Sent from my iPhone using Tapatalk

MPIE M15 MTK6595 need advice

Hello,
i recently bought a smartphone from Ali.
It's a MPIE M15 with MTK6595 (CPU-z is agree). Here's the specs :
Android Version : 5.0.0
Baseband : MOLY.WR8.W1315.MD.WG.MP.V43, 2014/09/17 10:10
Kernel : 3.4.67 [email protected] #1
Build Number : A100-HYDY 20150627-155331
Custom Build Version : 1435391497
Hardware : mt6595
After test, it's already rooted, i can access to Android Recovery.
The problem is that the installed rom is a Chinese Android version.
i want to install the factory Android Lollipop, but i cant find any version for my phone.
CyanogenMod installation via recovery have a OTA error..
So with my specs, is that possible to run another rom, like the Official Android (5.1?) and how to do it?
Thanks for your answer
Update
I understand that i have to install a custom recovery, but now i have a new problem..
MTK Droid Tools says the hardware is fake in Kernel or Firmware rolleyes not corresponding to the phone..
How to format all the phone, i want the Android Official Firmware on it, how to do that please ?..
OK MTK Droid Tools recognize my phone now. I do the backup for a custom TWRP recovery. if anyone know a link the original image of android .zip, thank you to tell me..
i continue :cyclops:
Ksaverii said:
OK MTK Droid Tools recognize my phone now. I do the backup for a custom TWRP recovery. if anyone know a link the original image of android .zip, thank you to tell me..
i continue :cyclops:
Click to expand...
Click to collapse
Please write if you find the program Im interested in purchasing that phone, but don't want to learn chinese
By the way, how that phone looks like in real life? All options works normally?
Hello, after two days working on the phone, i'm almost there.
First, this phone is faking his own components.
It's sold for a MTK6595, in fact it's a MTK6572. Same for Android, it's KitKat, not Lollipop. Not sure about the RAM (maybe 2Go). 1 virus app (AVG). Chinese stuff installed. I bought it 85$ from Ali (i understand now^^). The Camera is sh**, really! (but photo is not a prob for me).
Im not an experimented dev, the phone seems to be block somewhere, it's very hard to launch a custom recovery. I extracted the Stock ROM with MTK Droid Tools.
Finally, I install a custom recovery after a day of search, the Carvil Touchscreen and make it stable for the mPie. Now i want to install a Custom Rom on it, after replace the boot.img from Stock to Port, i have to modify the kernel, i will see..
If i managed a custom rom to get worked, i will post a tuto, if someones are interested
i continue :cyclops:
Ksaverii said:
Hello, after two days working on the phone, i'm almost there.
First, this phone is faking his own components... If i managed a custom rom to get worked, i will post a tuto, if someones are interested
i continue :cyclops:
Click to expand...
Click to collapse
Thanks for response. I wanted that phone for my kid, to let him play android games instead of killing my own phone with that trash
keramik said:
Thanks for response. I wanted that phone for my kid, to let him play android games instead of killing my own phone with that trash
Click to expand...
Click to collapse
I found a original custom rom for this on needrom, but the phone still faking his hardware.. The kernel is fake and i don't know what to do now.
It's not a Mpie M15 (fake), it's a Mpie Mp S-168, on KK.
If anybody got scammed with the Mpie M15, i backup my device 10 times, i have a stock rom for
How to install a genuine kernel to a MT6572 (MT6595 is fake) ?
Thanks
Hello. I also bought the phone. now we have to change the firmware. if you have the opportunity to specify where to get the firmware for this phone?

Needed iphone 8 plus clone firmware

bought this iphone 8 plus clone and well i had problems with language, it's all in chinese. so i started experimenting and now i messed the phone up to the point where only thing i can do is flash it using flashtool
Info i have:
Cpu MTK6582
1GB RAM
Android 4.4
Baseband v: MOLY.WR8.W1431.MD.TG.SP.V1
Step 1: Download and extract the iPhone 8 plus Clone stock firmware on your computer.
Step 2: After extracting, you will be able to get the Firmware File, Flash Tool, Driver and How-to Flash Guide.
Step 3: Install USB Driver on your Computer
STEP 4 : After that click on the Download Tab when the Smart Phone Flash Tool is launched,.
STEP 5: In the Download Tab, you should click on the scatter-loading button
STEP 6 : After that Locate the scatter file
After that connect your device to your computer using a USB cable. Then The flashing will begin automatically
Hi, Thanks Ramiki for your response.
The firmware that you put a link for me is iPhone 8 clone, but my device is iPhone 8 plus clone, in addition, the one that you mentioned is mt6580, mine is mt6582. are there any differences between them for flashing firmware?
Illia73 said:
Hi, Thanks Ramiki for your response.
The firmware that you put a link for me is iPhone 8 clone, but my device is iPhone 8 plus clone, in addition, the one that you mentioned is mt6580, mine is mt6582. are there any differences between them for flashing firmware?
Click to expand...
Click to collapse
Sorry sorry :| My fault. Clone Iphone 8 Plus S209_8P_H_EN_V0.2.5
is this goophone or original copy of iphone?
they Dont mention whether rom is mt6580 or 6582. so try
ramiki said:
Step 1: and extract the iPhone 8 plus Clone stock firmware on your computer.
Step 2: After extracting, you will be able to get the Firmware File, Flash Tool, Driver and How-to Flash Guide.
Step 3: Install USB Driver on your Computer
STEP 4 : After that click on the Download Tab when the Smart Phone Flash Tool is launched,.
STEP 5: In the Download Tab, you should click on the scatter-loading button
STEP 6 : After that Locate the scatter file
After that connect your device to your computer using a USB cable. Then The flashing will begin automatically
Click to expand...
Click to collapse
ramiki said:
Sorry sorry :| My fault. Clone S209_8P_H_EN_V0.2.5
is this goophone or original copy of iphone?
they Dont mention whether rom is mt6580 or 6582. so try
Click to expand...
Click to collapse
It's original copy of iPhone. thanks a million Ramiki
Afrer I installed the firmware for iPhone 8 plus clone, it shows black screen but it works, I see nothing just some sounds and touches which means it's working. I also tried volume down + power key, and any other keys to wipe data but nothing changed. and then also redownloaded my backup firmware, and again nothing changed. it doesn't even show logo screen. what should I do?
The firmware posted above by Ramiki was for a version running the MT6580 chip and NOT the MT6582 Chip. Can someone please be kind enough to post the CORRECT firmware or to explain how to modify the one posted above to successfully load?
redmachodevil said:
The firmware posted above by Ramiki was for a version running the MT6580 chip and NOT the MT6582 Chip. Can someone please be kind enough to post the CORRECT firmware or to explain how to modify the one posted above to successfully load?
Click to expand...
Click to collapse
please I have the same problem with you can you help me with flash for i phone 8 plus chip mtk 6582?
use this firmware will solve your problem
https://drive.google.com/uc?id=1qK5zLQOPHmUPn4drni57A3W4_HDu85N9&export=download
Illia73 said:
Afrer I installed the firmware for iPhone 8 plus clone, it shows black screen but it works, I see nothing just some sounds and touches which means it's working. I also tried volume down + power key, and any other keys to wipe data but nothing changed. and then also redownloaded my backup firmware, and again nothing changed. it doesn't even show logo screen. what should I do?
Click to expand...
Click to collapse
I flashed my iphone 8 clone with a firmware 7.0 , the screen went black . any help plz?
Need Help : Correct Firmware
MuhammadJihad said:
I flashed my iphone 8 clone with a firmware 7.0 , the screen went black . any help plz?
Click to expand...
Click to collapse
Hi
kindly help the same problem with me i have flashed my device with wrong firmware got from various sites hence device screen got black but its working i think there is any LCD Driver issue, now i am unable to find correct firmware for my device even i have tried around 15-20 different different flash files but not working. please help me to get it back. i have taken snapshot of device info before it got bricked, please have below details and help me please.
Brand : iphone8
Model : MN4A2ZPA
Android : 5.1
Kernel Version : Linux version 3.10.72 ([email protected]) (gcc version 4.8 (GCC) #1 SMP PREEMPT Wed jan 17 18:19:09 CST 2018
CPU : MT6580M
Resolution : 960 x 540
RAM : 512MB
ROM : 2GB
please provide if anybody have correct firmware
Great.
But we need the password to unzip the file
Could you...?
Thank you
Needed firmware iphone 8 plus clone a match
I can't run flashing because it's type not match.
I have type firmware code-516 while the target need type code-519.., Where I get the type please help me?
Hi,
I have an Iphone 8 clone (mt6582) that had a very laggy ios inteface so i flashed another ROM and lost radio signal (unknon baseband).
So i found after lots of reasearch 2 roms:
- 1st one had a working baseband but no ios UI and a little laggy(not as much as original one)
- 2nd one has an IOS 10 fluid interface but no radio
I tried to make a copy of NVRAM from 1st one using diferent tehnique to put it on 2nd rom but didn't worked,
Can anyone help me please?
I have to mention the original firmware was reporting:
-IOS 11.2.6 (15D100)
- Model: MNRJ2CH/A
-the MTK Droid Tools were reporting that inside the kernel was modified the info to show MT6589 instead of MT6582
build data was 2015/05/15 (i saw couple of clones with this date)

HELP - Beelink GT1 Ultimate

Hello, I recently bought a GT1. I would have liked to switch to Android TV but none of the available roms is compatible with my box, each time it's a brick, forced to flash the basic rom. Looking better, I did not find a compatible ROM with my serial number starting with LPN1. Do you have a track to flash something that works or there is nothing available?
best regards
LaPxWaSs said:
Hello, I recently bought a GT1. I would have liked to switch to Android TV but none of the available roms is compatible with my box, each time it's a brick, forced to flash the basic rom. Looking better, I did not find a compatible ROM with my serial number starting with LPN1. Do you have a track to flash something that works or there is nothing available?
best regards
Click to expand...
Click to collapse
I just flashed https://www.atvxperience.com/download/s912-v2ff-ddr-lpddr-ram-18-oct-2018/ successfully on mine.. Used the s912_LPDDR_atvXperience_v2FF.img file.. So far so good.. Flashed using USB to USB, and USB burning tool 2.1.6.. Android TV 7.1.2.. LPN1 32g/3g ddr4.. Only one I've found so far but was worried about hard brick so waiting till someone else confirmed it
Edit: Well, not sure now.. Seems every app that I've downloaded (Kodi, Chrome, VLC, the usual) minus showbox works fine but a lot of the apps that were originally on there (atvx apps) just crash out.. May have been a bad flash or I'm missing something simple. Will try reflashing later but it definitely doesn't brick it..
Hi, this version is compatible with the serial number LPN1? By reflashing all your applications work
LaPxWaSs said:
Hi, this version is compatible with the serial number LPN1? By reflashing all your applications work
Click to expand...
Click to collapse
It doesn't matter what the serial number is. All that matters is the architecture of the components of the ROM you're installing match up with the architecture of the box you have. In your case, any of the ROMs supporting the Amlogic s912 Octocore chipset should work on a Beehive GT1 Ultimate.
It sounds like a mistake you're making in the flashing process that is bricking your device, not the fault of the actual ROM.
Anyone know where to get Android 9.0 firmware for gt1_313M0 ? Is Android 6.0.1 really the final version of Android for this?!?!

Categories

Resources