Related
Good morning Guy,
i have a simple question that for me is not so simple because clearly i need some help. I have unlocked & rooted my tablet however now I get a notification for the Lollipop 5.0.1 OTA but when I try to install it and it reboots it then goes into the TRWP recovery mode and nothing else and if i choose to reboot from there the it reboots fine but without the upgrade. Any idea on how to fix this issue?
lucent6408d said:
Good morning Guy,
i have a simple question that for me is not so simple because clearly i need some help. I have unlocked & rooted my tablet however now I get a notification for the Lollipop 5.0.1 OTA but when I try to install it and it reboots it then goes into the TRWP recovery mode and nothing else and if i choose to reboot from there the it reboots fine but without the upgrade. Any idea on how to fix this issue?
Click to expand...
Click to collapse
Just flash the system.img with fastboot.
https://dl.google.com/dl/android/aosp/volantis-lrx22c-factory-8d83cd9b.tgz
They changed the way updating happens. If your rooted never plan on getting an OTA again
AlEsC said:
Just flash the system.img with fastboot.
https://dl.google.com/dl/android/aosp/volantis-lrx22c-factory-8d83cd9b.tgz
Click to expand...
Click to collapse
Hi,
this link does not take me to the .img file. this is a .tgz and if i extract I get a .tar. my apologies for my ignorance lol
lucent6408d said:
Good morning Guy,
i have a simple question that for me is not so simple because clearly i need some help. I have unlocked & rooted my tablet however now I get a notification for the Lollipop 5.0.1 OTA but when I try to install it and it reboots it then goes into the TRWP recovery mode and nothing else and if i choose to reboot from there the it reboots fine but without the upgrade. Any idea on how to fix this issue?
Click to expand...
Click to collapse
Is possible that the problem is because you have a Custom Recovery (TRWP) installed.
Try to flash the Recovery Stock, and then maybe OTA can be installed. If not, try to flash whole Factory Image.
lucent6408d said:
Hi,
this link does not take me to the .img file. this is a .tgz and if i extract I get a .tar. my apologies for my ignorance lol
Click to expand...
Click to collapse
You will have to extract several times to find the .img files
lucent6408d said:
Hi,
this link does not take me to the .img file. this is a .tgz and if i extract I get a .tar. my apologies for my ignorance lol
Click to expand...
Click to collapse
Use winrar or 7-zip to extract it. Inside is a zip file, extract that too. There you will find the system.img
Sent from my Nexus 9 using XDA Free mobile app
lucent6408d said:
Hi,
this link does not take me to the .img file. this is a .tgz and if i extract I get a .tar. my apologies for my ignorance lol
Click to expand...
Click to collapse
The you must extract .tar again. The you must use .bat or extract a .ZIP and then:
Code:
fastboot erase system
fastboot erase recovery
fastboot erase boot
fastboot erase cache
fastboot erase vendor
fastboot erase userdata
pause
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash cache cache.img
fastboot flash vendor vendor.img
But with this, all your data will be erased.
lept_2014 said:
The you must extract .tar again. The you must use .bat or extract a .ZIP and then:
Code:
fastboot erase system
fastboot erase recovery
fastboot erase boot
fastboot erase cache
fastboot erase vendor
fastboot erase userdata
pause
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash cache cache.img
fastboot flash vendor vendor.img
But with this, all your data will be erased.
Click to expand...
Click to collapse
You don't have to erase everything to update.
Code:
fastboot flash boot boot.img
fastboot erase system
fastboot flash system system.img
Will update your tablet without wiping everything.
I tried to flash a downgrade image to my moto e 2nd gen. Now Im stuck in bootloader and a warning message for unlocked bootloder. Ive tried to flash logo.bin, and other images aswell with no luck. It keeps asking me to install a valid signed images, I don't know where to find these images. Please help!
You need to do exactly what it's asking you to do - flash valid signed images. Which model do you have (XT152x)? Which region are you in? Which version were you downgrading from?
Just so you know, downgrading the stock ROM is very highly discouraged as it can cause bricking in certain circumstances. In particular, never try to downgrade the stock ROM when the bootloader is locked. You can try flashing back the upgraded images and seeing if your phone accepts them. Be aware that the signed images must match your model number and region.
squid2 said:
You need to do exactly what it's asking you to do - flash valid signed images. Which model do you have (XT152x)? Which region are you in? Which version were you downgrading from?
Just so you know, downgrading the stock ROM is very highly discouraged as it can cause bricking in certain circumstances. In particular, never try to downgrade the stock ROM when the bootloader is locked. You can try flashing back the upgraded images and seeing if your phone accepts them. Be aware that the signed images must match your model number and region.
Click to expand...
Click to collapse
Thanks for reply.
I don't have these images, where to get them? My model is xt1524reteuall, I'm in europe/sweden and I downgraded from stock Lollipop 5.0.2
I did unlock the bootloader via motorolas site.
pemhak said:
Thanks for reply.
I don't have these images, where to get them? My model is xt1524reteuall, I'm in europe/sweden and I downgraded from stock Lollipop 5.0.2
I did unlock the bootloader via motorolas site.
Click to expand...
Click to collapse
Hmm, so you went from a newer 5.0.2 build to an old 5.0.2 build? What were you downgrading to?
Go to this folder: https://mega.nz/#F!rMIhDLgR!oq5Cz_XbgZLEEysmqoYtcA
Navigate to Surnia ->5.0.2
Look for the file XT1524_RETEUALL_MOTOE2... (it's near the middle of the list)
Download and try flashing everything it in using fastboot.
squid2 said:
You need to do exactly what it's asking you to do - flash valid signed images. Which model do you have (XT152x)? Which region are you in? Which version were you downgrading from?
Just so you know, downgrading the stock ROM is very highly discouraged as it can cause bricking in certain circumstances. In particular, never try to downgrade the stock ROM when the bootloader is locked. You can try flashing back the upgraded images and seeing if your phone accepts them. Be aware that the signed images must match your model number and region.
Click to expand...
Click to collapse
Thanks for reply.
I don't have these images, where to get them? My model is xt1524reteuall, I'm in europe/sweden and I downgraded from stock Lollipop 5.0.2
I did unlock the bootloader via motorolas site.
I got my device back!! I did succeed to flash it with this rom "surnia_stock_5.0.2.zip" with TWRP. I did not have the patience to wait at the Motorola logo when booting, I have to wait 2-3 min and 2-3 min for services to start. for the device to boot. But now it doesn't register any sim card when at desktop?!?
squid2 said:
Hmm, so you went from a newer 5.0.2 build to an old 5.0.2 build? What were you downgrading to?
Go to this folder:
Navigate to Surnia ->5.0.2
Look for the file XT1524_RETEUALL_MOTOE2... (it's near the middle of the list)
Download and try flashing everything it in using fastboot.
Click to expand...
Click to collapse
I was downgrading to kitkat 4.4.4 due to poor battery in lollipop 5.0.2. I'm downloading a xt1524reteuall rom right now but ir is going slowly.
pemhak said:
I was downgrading to kitkat 4.4.4 due to poor battery in lollipop 5.0.2. I'm downloading a xt1524reteuall rom right now but ir is going slowly.
Click to expand...
Click to collapse
Oh, you must have flashed something really wrong then. There are no 4.4.4 ROMs for this device. You would have flashed something totally incompatible and highly risky if you flashed 4.4.4 from somewhere. That may have wrecked your modem software too. Download and flash the proper XT1524-specific software with the correct modem. If you are unhappy with the performance of the stock ROM, you can flash scritch007's CM12.1.
squid2 said:
Oh, you must have flashed something really wrong then. There are no 4.4.4 ROMs for this device. You would have flashed something totally incompatible and highly risky if you flashed 4.4.4 from somewhere. That may have wrecked your modem software too. Download and flash the proper XT1524-specific software with the correct modem. If you are unhappy with the performance of the stock ROM, you can flash scritch007's CM12.1.
Click to expand...
Click to collapse
Ok, thanks. I will wait for download to complete and flash that image.
pemhak said:
Ok, thanks. I will wait for download to complete and flash that image.
Click to expand...
Click to collapse
Hi! Did you solve your problem? I'm kind of stuck on same problem and with no working solution yet.
EDIT: I tried the @squid2 with no success. Maybe I will send the phone to waranty....
Noeljunior said:
Hi! Did you solve your problem? I'm kind of stuck on same problem and with no working solution yet.
EDIT: I tried the @squid2 with no success. Maybe I will send the phone to waranty....
Click to expand...
Click to collapse
I did solve the problem with these steps.
1. Find and download the files for your region.
2. Unzip files to a folder with fastboot and adb.
3. Create stock.bat with these commands and run stock.bat within the same folder as above files.
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot oem config carrier vzw
fastboot oem fb_mode_clear
fastboot reboot
(4. I needed to reunlock my Moto E 2nd Gen at Motorolas site, because i did relock it.)
5. Get into bootloader menu and flash this TWRP image (i can email it to you) within the same folder and flash it with fastboot.
6. Restart phone. Wait 2-3 minutes so it boots into android.
7. Hope I made it clear enough to follow the instructions, if you got questions please reply and I try to answer them. Sorry for my poor english.
pemhak said:
I did solve the problem with these steps.
1. Find and download the files for your region.
2. Unzip files to a folder with fastboot and adb.
3. Create stock.bat with these commands and run stock.bat within the same folder as above files.
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot oem config carrier vzw
fastboot oem fb_mode_clear
fastboot reboot
(4. I needed to reunlock my Moto E 2nd Gen at Motorolas site, because i did relock it.)
5. Get into bootloader menu and flash this TWRP image (i can email it to you) within the same folder and flash it with fastboot.
6. Restart phone. Wait 2-3 minutes so it boots into android.
7. Hope I made it clear enough to follow the instructions, if you got questions please reply and I try to answer them. Sorry for my poor english.
Click to expand...
Click to collapse
And I'm back with my Moto E! Thank you! I wasn't doing some of those commands and with all those commands it works! Thank you!
PuRE FiRMWARE aNd STuFF
XT1575
By using any of these you agree that I am not responsible for ANYTHING that can or may happen to you, or your device!
Android 5.1.1
5.1.1 LPH23.116-18 FIRMWARE
5.1.1 FIRMWARE
5.1.1 BOOT.IMG
5.1.1 RECOVERY.IMG
Android 6.0
6.0 MPH24.49-18 FIRMWARE
6.0 FIRMWARE
--mirror--
6.0 BOOT.IMG
--mirror--
6.0 RECOVERY.IMG
--mirror--
Motorola Supplied Firmware
Moto X Pure Edition (2015)
MPH24.49-18_18
6.0 MPH24.49-18-3 FIRMWARE
MPH24.49-18-3 FIRMWARE
This is a 100% stock FIRMWARE dump after the Feb 1st 2016 OTA. It includes everything a normal FIRMWARE zip has, except for the bootloader. I cannot figure out how to dump the bootloader.....yet. I tested this multiple times with no issues. You will also notice there is only one system.img instead of the multiple system_sparsechunk files like the old FIRMWARES. It is in sparse format, just one file now. This is how Motorola is doing it. Flash it via:
Code:
fastboot flash partition gpt.bin
fastboot reboot bootloader
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot flash bluetooth BTFM.bin
fastboot erase cache
fastboot erase userdata
fastboot reboot
You may notice a "sparse header error" when flashing at the beginning. Don't worry about it, all is well. The current AutoFlashFirmware.bat file doesn't work with this Firmware file. Flash the files manually!
6.0 MPH24.49-18-4 FIRMWARE
This is the May security update full firmware
MPH24.49-18-4 FIRMWARE
TWRP BACKUPS
5.1.1 LPH23.116-18 Stock Unrooted TWRP Backup
This is a 100% stock, unrooted TWRP backup. Unzip the file, and put the "Stock Unrooted" file in with your TWRP backups. Restore with that file, then flash the stock recovery. You should be able to take an OTA after flashing the stock recovery
5.1.1 Stock Unrooted.zip
6.0 MPH24.49-18 Stock Unrooted TWRP Backup
This is a 100% stock, unrooted TWRP backup. Unzip the file, and put the "Stock Unrooted 6.0" file in with your TWRP backups. Restore with that file, then flash the stock recovery. You should be able to take an OTA after flashing the stock recovery
6.0 Stock Unrooted.zip
--mirror--
6.0 MPH24.49-18-3 Stock Unrooted TWRP Backup
This is a 100% stock, unrooted TWRP backup. Unzip the file, and put the "stock_MPH24.49-18-3" file in with your TWRP backups. Restore with that file, then flash the stock recovery. You should be able to take an OTA after flashing the stock recovery
stock_MPH24.49-18-3
OTA's
OTA Firmware Update Android 5.1 (LPH23.116-18) to 6.0 (MPH24.49-18)
Blur_Version.23.21.18.clark_retus.retus.en.US.zip
--mirror--
OTA February Security Update MPH24.49-18 to MPH24.49-18-3
Blur_Version.24.11.18.clark_retus.retus.en.US.zip
ANYONE HAVING ISSUES WITH THIS OTA SECURITY UPDATE SEE THIS
AutoFlashFirmwareScript
MAKE SURE YOU ARE NOT DOWNGRADING AS IT WILL CAUSE BOOT LOOPS
Current Firmware 5.1.1 to 6.0.0= OK
Current Firmware 6.0.0 to 5.1.1= BOOTLOOP
-This is a Windows .bat script to automagically flash a firmware file:
Code:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot flash bluetooth BTFM.bin
fastboot erase cache
fastboot erase userdata
fastboot reboot
-Make sure Motorola USB Drivers are installed
-Extract the Motorola Firmware you want to flash
-Extract the contents of the AutoFlashFirmwareScript folder inside the folder of the firmware previously extracted (Motorola Firmware and AutoFlashFirmwareScript files must be in the same folder)
-Start the device in fastboot
-Connect to usb
-Run (double click) AutoFlashFirmware.bat
AutoFlashFirmware.zip
Useful Commands
Code:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot reboot
I would take a nice fast stock rom why not until CM roms have working VolTE. If you need some mirrors I can help
patt2k said:
I would take a nice fast stock rom why not until CM roms have working VolTE. If you need some mirrors I can help
Click to expand...
Click to collapse
I plan on cooking just stock roms. Have little time to even do that, but I find them useful most of the time. You can mirror whatever you'd like.
The modified logo.bin inside of the zip has the unlocked bootloader screen removed, and the normal stock "locked bootloader" screen in it's place.
Nice post it when you have recovery flash able stock from
Sent from my XT1575 using Tapatalk
I've been waiting for a stock rom, looking forward to this. Thank you.
Will you create one for Moto X Style version (EU) too?
Verstuurd vanaf mijn XT1572 met Tapatalk
odin13 said:
Will you create one for Moto X Style version (EU) too?
Verstuurd vanaf mijn XT1572 met Tapatalk
Click to expand...
Click to collapse
If and when I can get the firmware, definitely. Took me forever to get this firmware since I could not dump it from my device like normal. Never had an issue before with taking dumps?:laugh::silly:
Oh snap stock goodness
Sent from my XT1575 using Tapatalk
Currently working on the updater-script, my arch nemisis. Hopefully if all goes well I'll have it up tonight/tomorrow. After the unrooted stock from is done, I'll rock out a stock rooted....possibly with some debloat/enhancements.
here, this is the firmware for the XT1572 (STYLE) Retail EU: https://drive.google.com/file/d/0BzsA17IjC5k2Vng2RWlRM0dRNTQ/view?usp=sharing
gokart2 said:
Currently working on the updater-script, my arch nemisis. Hopefully if all goes well I'll have it up tonight/tomorrow. After the unrooted stock from is done, I'll rock out a stock rooted....possibly with some debloat/enhancements.
Click to expand...
Click to collapse
That would be awesome I like stock with some extra goodness, you rock man !
Sent from my XT1575 using Tapatalk
nitros12 said:
here, this is the firmware for the XT1572 (STYLE) Retail EU: https://drive.google.com/file/d/0BzsA17IjC5k2Vng2RWlRM0dRNTQ/view?usp=sharing
Click to expand...
Click to collapse
Awesome! Just seen your reply in the Q&A. I'll try to throw some stuff together for the STYLE! :good:
Updated the OP with XT1572 "STYLE" firmware, etc....
Code:
make clean && make mrproper
I have no clue how to understand this lol, if I could I would
Sent from my XT1575 using Tapatalk
I have no clue either...lol!
gokart2 said:
I have no clue either...lol!
Click to expand...
Click to collapse
its a silly error. that line is blank that's why that error.
delete that line and it should work..i did for you,,you can try that one.
@gokart2 if my previous upload didn't work here is the second. You didn't close the bracket for assert at line 9
amit.lohar said:
@gokart2 if my previous upload didn't work here is the second. You didn't close the bracket for assert at line 9
Click to expand...
Click to collapse
Thank you very much!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!:good::good::good::good::good:
I appreciate the help very much! I'm gonna give it a try and see.
I see that I didn't close it now. I built about 10 of these....so I probably thought I had it closed in this one like the others.
And I thought we were supposed to leave one blank line at the end?
Update...... I got the installer-script figured out. It flashed, but after sitting at the splash screen for a little bit it rebooted into recovery....?
I'm lost at this point. I'm gonna try to do a system dump from my device and build it that way (the way I'm used to) instead of they way I built it from the Firmware. The tool I used may have had something to do with it?
Your bootloader must be unlocked.
You can't lock the bootloader, to do this you will need a signed firmware from Motorola (and no one found yet). Instead you can use Magisk to hide the unlocked bootloader, bypass SafetyNet and be able to use Google Pay, for example.
You will not get OTA updates from Motorola even if you somehow lock the bootloader because your phone is registered forever to the "retcn" software update channel, instead of "retail" or "retbr".
Recommended: set your Platform Tools (adb and fastboot) system wide using this guide
https://forum.xda-developers.com/android/software/guide-how-to-set-fastboot-adb-to-wide-t3591240
Tested for updating from Oreo stock without wipe.
Steps for clean flashing or update
- Place the suitable script attached on the extracted ROM folder and flash (these scripts are only for XT1710-08 variant to prevent lost modem signal)
- After all the commands succeeded, wait for a full reboot (because of encryption)
- Flash TWRP
- Flash Magisk normally through TWRP
- Be happy
Firmware (you can use this on other XT1710 variants)
Version: PPS29.133-30 (Android 9.0 Pie)
https://mirrors.lolinet.com/firmwar...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Other versions:
https://mirrors.lolinet.com/firmware/moto/albus/official/RETAIL/
TWRP
https://forum.xda-developers.com/z2-play/development/-t3715660
Magisk
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Motorola drivers https://motorola-global-en-aus.custhelp.com/app/answers/prod_detail/a_id/86934/p/154,153
Google SDK Platform Tools https://developer.android.com/studio/releases/platform-tools
Commands for flashing and wipe
PS: the difference from the official `flashfile.xml` commands is that it doesn't contains `fastboot erase modemst1` and `fastboot erase modemst2`
Code:
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash system system.img_sparsechunk.11
fastboot flash system system.img_sparsechunk.12
fastboot flash oem oem.img
fastboot erase carrier
fastboot erase cache
fastboot erase userdata
fastboot erase DDR
fastboot oem fb_mode_clear
fastboot reboot
Commands for flashing without wipe (update)
PS: the only difference from the previous one is that it doesn't contains `fastboot erase userdata`
Code:
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash system system.img_sparsechunk.11
fastboot flash system system.img_sparsechunk.12
fastboot flash oem oem.img
fastboot erase carrier
fastboot erase cache
fastboot erase DDR
fastboot oem fb_mode_clear
fastboot reboot
Thanks to
@eqbirvin
@Junior Passos
@HTCDevil
Hello. If I use your script is unzipped the rom with update to August 2018 is the same? They are currently on custom rom Firehound! I would like to go back to the Motorola Blur retail. Do I have to give all the commands from fastboot?
cuciu70 said:
Hello. If I use your script is unzipped the rom with update to August 2018 is the same? They are currently on custom rom Firehound! I would like to go back to the Motorola Blur retail. Do I have to give all the commands from fastboot?
Click to expand...
Click to collapse
Yes! To go back to Motorola stock ROM you must follow this tutorial to make a clean flash, using the flash-wipe script.
my post was wrong, Moderators please delete my post.
Did'nt know i can't delete my own post.
felipecassiors said:
Yes! To go back to Motorola stock ROM you must follow this tutorial to make a clean flash, using the flash-wipe script.
Click to expand...
Click to collapse
the password does not work.
I tried to open the file with 7zip and zip extractor pro. I enter the password!
wrong password.
cuciu70 said:
the password does not work.
I tried to open the file with 7zip and zip extractor pro. I enter the password!
wrong password.
Click to expand...
Click to collapse
Firmware:
https://drive.google.com/open?id=1rcgUvLG5c7l9jH8AzuTg3WPJnORQ6VlY
The password is
Code:
MotorolaFirmwaresLB
I use WinRAR, but 7-Zip should work. Try again please, here is working.
Would it be easy to update the system with the latest patch? I have magisk installed with system from April patch. If so what how would be the procedure?
Followed all the steps and got it working. Thanks so much, the original software on this version of the phone is terrible!
One thing, like a few others, my fingerprint sensor isn't working. Is it as simple as a wipe after install?
pjcons said:
Followed all the steps and got it working. Thanks so much, the original software on this version of the phone is terrible!
One thing, like a few others, my fingerprint sensor isn't working. Is it as simple as a wipe after install?
Click to expand...
Click to collapse
Take a look at this post friend:
https://forum.xda-developers.com/z2...reo-retail-via-fastboot-t3786153/post76486376
Try to flash again but evading this 4 commands.
felipecassiors said:
Take a look at this post friend:
https://forum.xda-developers.com/z2...reo-retail-via-fastboot-t3786153/post76486376
Try to flash again but evading this 4 commands.
Click to expand...
Click to collapse
Yes I took those out when flashed and still no fp sensor. Thanks for sending on though. I read everything b4 flash but still no fp sensor.
But I didn't wipe 1st so might flash again and wipe 1st?
Everything else working 100% :good:
pjcons said:
Yes I took those out when flashed and still no fp sensor. Thanks for sending on though. I read everything b4 flash but still no fp sensor.
But I didn't wipe 1st so might flash again and wipe 1st?
Everything else working 100% :good:
Click to expand...
Click to collapse
If you can, please try wiping in first. If still doesn't work, the procedure to solve this is:
- Flash the original ROM (that ugly ZUI one) to get it working again
- Flash the ROM on this thread, wiping, evading that 4 commands
I can help you to find the ZUI ROM if you need.
felipecassiors said:
If you can, please try wiping in first. If still doesn't work, the procedure to solve this is:
- Flash the original ROM (that ugly ZUI one) to get it working again
- Flash the ROM on this thread, wiping, evading that 4 commands
I can help you to find the ZUI ROM if you need.
Click to expand...
Click to collapse
Cheers mate. If u can send me a link to the very ugly Zui rom just in case would be great.
pjcons said:
Cheers mate. If u can send me a link to the very ugly Zui rom just in case would be great.
Click to expand...
Click to collapse
https://androidfilehost.com/?fid=1322778262903986742
Just make sure your device is XT1710-08
Tested on a XT1710-06 full wipe and it works great, because i wanted to do and update and i goot bootloop.
Just in case someone find this, im from México, I flashed this fastboot rom and installed Magisk to get root, used the Canary build to make it work with my fav games that are Fate go and Pokemon go (spoof) and it works like a charm, thanks.
felipecassiors said:
https://androidfilehost.com/?fid=1322778262903986742
Just make sure your device is XT1710-08
Click to expand...
Click to collapse
Yep, it's an XT1710-08 for sure! Thanks again...
pjcons said:
Yep, it's an XT1710-08 for sure! Thanks again...
Click to expand...
Click to collapse
Friend, use the tutorial of this thread, but instead of that script, use this attached to flash the ZUI stock ROM.
8bitcode said:
Tested on a XT1710-06 full wipe and it works great, because i wanted to do and update and i goot bootloop.
Just in case someone find this, im from México, I flashed this fastboot rom and installed Magisk to get root, used the Canary build to make it work with my fav games that are Fate go and Pokemon go (spoof) and it works like a charm, thanks.
Click to expand...
Click to collapse
Friend, for models other than XT1710-08 (outside China), you can use this script attached. It is more recommended.
Thank you for the feedback!
felipecassiors said:
Friend, for models other than XT1710-08 (outside China), you can use this script attached. It is more recommended.
Thank you for the feedback!
Click to expand...
Click to collapse
Hey I got back to ZUI - the Chinese ROM came up. Fingerprint working. So rebooted into BL and flashed the firmware as per OP. Again, no FP sensor.
I'm gonna try again and wipe after install ZUI, BEFORE flash and wipe Oreo.
[2nd try no better??]
It flashes ok but FP sensor just won't work. Everything else working. When you say "Flash the ROM on this thread, wiping, evading that 4 commands" I use the flash and wipe script and remove the 4 commands (the erase modem seem to have been removed already from the script). Any ideas, I'm so close! Have flashed back and forth a few times tonight. It's fun though! Cheers!
pjcons said:
Hey I got back to ZUI - the Chinese ROM came up. Fingerprint working. So rebooted into BL and flashed the firmware as per OP. Again, no FP sensor.
I'm gonna try again and wipe after install ZUI, BEFORE flash and wipe Oreo.
[2nd try no better??]
It flashes ok but FP sensor just won't work. Everything else working. When you say "Flash the ROM on this thread, wiping, evading that 4 commands" I use the flash and wipe script and remove the 4 commands (the erase modem seem to have been removed already from the script). Any ideas, I'm so close! Have flashed back and forth a few times tonight. It's fun though! Cheers!
Click to expand...
Click to collapse
Mine XT1710-08 fingerprint sensor works without removing the 4 commands, I just remove the 2 erase modem (already removed in the flash scripts). Anyway, try to install the ROM of this thread (https://forum.xda-developers.com/z2-play/how-to/fastboot-rom-oreo-retail-via-fastboot-t3786153) and see if it work for you. Please post here if you have news about it.
Rooting
I did all the steps and completely reinstalled android 8.0 on my moto z2 play, I then got twrp and tried flashing magisk 17.1, I got stuck in a bootloop but managed to flash the whole thing again, which solved the problem. To make sure this doesn't happen again, could you please state the steps for rooting. I cant remember if it was because I did not input the code into the terminal. When I input the code am I supposed to get a response or message, because it just stays bank?
Thank you
I would like to share my experienced how to unbricked my phone that stock on fastboot mode.why my phone is brick? The reason why my phone brick just because i restore the wrong system with the other vendor from china to miuimix and after restore it, it stock on fastboot mode unable to recover backup or to load in recovery mode. It didn't also turn off. l try to use miflash tool but it didn't work because of authorization not match to my phone, i tried other fastboot rom but it didnt work.. Try to boot twrp using fastboot boot but it didn't show any. I came up with the idea to flash. Img using cmd into the system that i restore, begin with the boot.img nothing will happen. Until i flash the vbmeta.img, then it begin to show boot img and eventually access twrp. I wiped everything and flash again a brandnew rom miui12 and it works well now.. Hope it will help to others to have an idea to unbrick there phone. ☺☺☺
flamedrops said:
I would like to share my experienced how to unbricked my phone that stock on fastboot mode.why my phone is brick? The reason why my phone brick just because i restore the wrong system with the other vendor from china to miuimix and after restore it, it stock on fastboot mode unable to recover backup or to load in recovery mode. It didn't also turn off. l try to use miflash tool but it didn't work because of authorization not match to my phone, i tried other fastboot rom but it didnt work.. Try to boot twrp using fastboot boot but it didn't show any. I came up with the idea to flash. Img using cmd into the system that i restore, begin with the boot.img nothing will happen. Until i flash the vbmeta.img, then it begin to show boot img and eventually access twrp. I wiped everything and flash again a brandnew rom miui12 and it works well now.. Hope it will help to others to have an idea to unbrick there phone.
Click to expand...
Click to collapse
Could you explain? My phone is stuck at fastboot and my pc doesn't detect the phone.
if u could access your phone via fastboot / adb then it wasn't a hardbrick , just a softbrick
TahmidZee said:
Could you explain? My phone is stuck at fastboot and my pc doesn't detect the phone.
Click to expand...
Click to collapse
You should check first the driver of your computer. Make sure you have the driver of your phone to your computer. After that you can check your device via adb by using commnd on cmd "adb devices".
instructions to flash:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot erase recovery
fastboot flash recovery twrp-3.3.1-0-davinci.img
link: https://dl.twrp.me/davinci/twrp-3.3.1-0-davinci.img
w595shubham said:
instructions to flash:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot erase recovery
fastboot flash recovery twrp-3.3.1-0-davinci.img
link: https://dl.twrp.me/davinci/twrp-3.3.1-0-davinci.img
Click to expand...
Click to collapse
VERY VERY THANX A LOT MAN...THX THX THX:highfive:
flamedrops said:
I would like to share my experienced how to unbricked my phone that stock on fastboot mode.why my phone is brick? The reason why my phone brick just because i restore the wrong system with the other vendor from china to miuimix and after restore it, it stock on fastboot mode unable to recover backup or to load in recovery mode. It didn't also turn off. l try to use miflash tool but it didn't work because of authorization not match to my phone, i tried other fastboot rom but it didnt work.. Try to boot twrp using fastboot boot but it didn't show any. I came up with the idea to flash. Img using cmd into the system that i restore, begin with the boot.img nothing will happen. Until i flash the vbmeta.img, then it begin to show boot img and eventually access twrp. I wiped everything and flash again a brandnew rom miui12 and it works well now.. Hope it will help to others to have an idea to unbrick there phone.
Click to expand...
Click to collapse
Can u please explain it. I am stuck with the same problem. I got success in flashing fastboot rom via miflash tool but it's still stuck in fastboot.
Thanks God Bless You.
---------- Post added at 05:01 PM ---------- Previous post was at 04:36 PM ----------
Deaddo6 said:
VERY VERY THANX A LOT MAN...THX THX THX:highfive:
Click to expand...
Click to collapse
This Helped You guys are angel
w595shubham said:
instructions to flash:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot erase recovery
fastboot flash recovery twrp-3.3.1-0-davinci.img
link: https://dl.twrp.me/davinci/twrp-3.3.1-0-davinci.img
Click to expand...
Click to collapse
I have the same problem. I tried also this one, but nothing.
Everything goes ok in CMD, but when I type:
fastboot boot twrp.img
I get:
FAILED (remote: Failed to load/authenticate boot image: Load Error)
I still can't go in Recovery, neither turn off the phone. How solve this?!
dix93 said:
I have the same problem. I tried also this one, but nothing.
Everything goes ok in CMD, but when I type:
flash boot twrp.img
I get:
FAILED (remote: Failed to load/authenticate boot image: Load Error)
I still can't go in Recovery, neither turn off the phone. How solve this?!
Click to expand...
Click to collapse
flash boot twrp.img?
What do you wanna do?
If you want to boot into TWRP it should be
Code:
fastboot boot recovery "name-of- recovery.img"
If you want to flash TWRP it should be
Code:
fastboot flash recovery "name-of-recovery.img"
Your command
fastboot flash boot twrp.img should flash the recovery image over the boot image?
If you want to boot into twrp you should use the command above.
As far as I know not every device/firmware is able to boot into TWRP. It seems other users were able to do so with a mi 9t so my advice would be:
- Try another usb port / cable.
- Check twice if you renamed the twrp image correctly
- Try another twrp version (older one or unofficial)
w595shubham said:
instructions to flash:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot erase recovery
fastboot flash recovery twrp-3.3.1-0-davinci.img
link: https://dl.twrp.me/davinci/twrp-3.3.1-0-davinci.img
Click to expand...
Click to collapse
Wolfcity said:
flash boot twrp.img?
What do you wanna do?
If you want to boot into TWRP it should be
Code:
fastboot boot recovery "name-of- recovery.img"
If you want to flash TWRP it should be
Code:
fastboot flash recovery "name-of-recovery.img"
Your command
fastboot flash boot twrp.img should flash the recovery image over the boot image?
If you want to boot into twrp you should use the command above.
As far as I know not every device/firmware is able to boot into TWRP. It seems other users were able to do so with a mi 9t so my advice would be:
- Try another usb port / cable.
- Check twice if you renamed the twrp image correctly
- Try another twrp version (older one or unofficial)
Click to expand...
Click to collapse
Thank you. Actually I was confused in the transcript here, I meant fast boot instead of flash.
But I figured out to use XiaomiFlash Tool to install a ROM via fastboot, and then reinstall a recovery.
The popup camera is not working good with the XIAOMI official rom (It tries to close the cam even if it is already closed). Now I'm trying to install Havoc OS to try to solve those problem, but it demands me the miui v11.0.4 or new (error in twrp), even if I have the miui v12.... trying to figure out why
for the guys whome are stuck on fastboot, you may try "XiaoMiTool V2". this bought my Mi9T from fastboot to life.
make sure all the drivers are installed as well. what's better is install usb drivers, reboot computer, enable usb debugging, connect the phone to computer, select transfer data, wait till the computer completely setup your phone, turn off phone and connect to computer, wait till computer detects and setup, put the phone on fastboot mode and connect, check whether computer shows android device... once everything are confirmed then proceed with flasing.. :good::good:
w595shubham said:
instructions to flash:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot erase recovery
fastboot flash recovery twrp-3.3.1-0-davinci.img
link: https://dl.twrp.me/davinci/twrp-3.3.1-0-davinci.img
Click to expand...
Click to collapse
This command - fastboot flash vbmeta worked.
(using a version from Redispade for Grus - mi9se)
Unbricked my bootloop (recovery) after upgrading from miui 12 (android 10) to 12.5 android 11.
thanks!