Related
Hey Guys,
I'm in need of some really n00b friendly advice.
When you flash a new ROM (i.e. CM9) in CWM the tutorials tell you to flash the file named Update.zip. My problem is that I can't seem to find one in the zip file I downloaded for my xperia mini.
I downloaded FXP131, and found the zip file to contain a boot.img, which will be the kernel. And 2 other folders named META-INF and System.
I know how to flash the kernel and expect it was just left in there for easy transportation.
But where in the world is 'update.zip'?
Am I meant to unpackage the kernel then re-zip the META-INF and System folder and then call that 'Update.zip'?
I've flashed roms for some of my other devices before, but they've always used flashtool or samsungs flashtool.
Please help me guys, I don't like sounding this inexperienced
update.zip
I'm wondering if the ROM I am trying to flash needs to be renamed as update.zip in order to work. It is krook's v.6 of JB for the Lenovo K1 tablet. Since the download site has to distinguish between wifi and 3G versions, as well as nvflash versions there are a number of different filenames, however does it need to be renamed after putting it on my SD card?
Generally speaking "update.zip" is used as a generic name. For example the update.zip I just flashed is actually named "rascarlo_maguro_ota_2012-11-01.zip". When you flash a custom ROM in a custom recovery you should be able to browse & flash whichever file you need.
The FXP131.zip file that contains the boot.img and 2 other folders named META-INF and System is the "update.zip"
solved
My problem was an incomplete download. I compared file sizes, and checked md5sums and determined the correct ROM and it is now in the middle of finishing the upgrade/optimization process.
Thx
Dear Admins,
Could we get a forum setup for the Cube U27GT WiFi version? I dug around on the site a bit beforehand but didn't see one, I apologize if I missed it and please direct me there if I did.
I have this tablet and I am doing some initial basic firmware development for it and want a proper place to start putting threads.
Dear Dev Community,
I can't root this bloody thing... At least, not the rom itself. Let me explain...
I can flash the stock rom from Cube and that can be rooted using Kango Root. --Fine...
However, I can't figure out how to replicate this when I make my own rom.
Thus far, here is what I have attempted...
1. Setup dsixda's excellent kitchen on my Ubuntu workstation.
2. Unpack the rom, clean things up, manually put the boot image into the dsixda unpacked working rom folder, run dsixda's root functionality (which add SU binary to xbin and SuperSu apk file to app folder as well as do some things with the boot image file).
3. Rather than using repack with Dsixda (which makes an update.zip image which I can't use because the stock recovery environment on this device can't flash zip update files and I can't for the life of me figure out how to get and or make a working CWM or TWRP recovery image for this unit)...
4. What I do is I run commands in linux to unpack the stock rom to another directory and mount that directory, then clear out a bunch of folders and then manually copy in my files from dsixda's working folder, then repackage up my unpacked stock rom into a new system.img file.
5. Then copy my now modified boot image, system image, and also userdata image (I modify that as well as that is where most all of the chinese bloatware is loaded from) to my SP_Flash_Tool, generate new checksum.ini file and flash normally...
What I get as a result...
1. As long as I am really careful with how I copy files into my new image, the new system flashes okay (if I am not careful, after flash USB storage for some reason has a format error and the system will boot but can't mount USB storage and other odd issues ensue as a result).
2. Assuming everything flashes okay, and no issue with USB storage partition, I have SuperSU installed and when I go to use an app (ES File Explorer or Root Checker) that require's root, I do get the prompt. However none of the root functions actually work and Root Checker tells me I am not rooted.
That is as far as I have got. So as a result, I have a really nice, westernized, cleaned up rom but with no root.
Anyone have any ideas?
This is my first adventure into mod'ing MTK roms so I am sure I am doing all kinds of things wrong . I had a good bit of experience on Rockchip SoC's before this though.
Kind regards and thanks in advance!
Roman
Figured it out!
So I finally did the following rather hackish work-around...
1. Flash stock firmware...
2. Root with Kingo Root
3. Enabled ADB
4. Attach to PC and fire up MTK Droid Tools
5. Take a full backup
6. Modify the system image from the backup and make changes
7. Put that in new firmware flash package
8. Flash new firmware
YAY - Cleaned up rom, modified, with root!
Once I get it all packaged up and uploaded to mtkfirmware.com I will post a link for anyone that wants a cleaned up rom with root!
The only downfall of the above method is that it absolutely requires that the developer have a device on hand because you can't just root the stock image file (at least, I couldn't figure out how... - bleh...
Kind Regards,
Roman
Dear roman,
Thanks for your hard work.
I have a simple question (I think) and if you have the time to reply or -any other android guru- I would be thankful.
My later issue was with a U27GT cube tablet, but I have others, one for each kid, and this is more of general question.
I am reading this and other forums about how to flash tablets from PC. My question is:
Can the flashing process be done from a SD card?
Thanks a lot and regards,
Fernando
SKorea
PLEASE READ NEW FLASHING INSTRUCTIONS​
Disclaimer:
I am not responsible for any bricks. By flashing this you understand that no one involved with the making of this Rom is responsible for a brick. However, if two nations go to war, that's okay, because they will destroy themselves and their people will worship me, THE BUTTAHLORD OF BUTTERNOOBIA!!!
I mean uhh... No, very bad thing, no countries should not go to war *cough* destroy yourselves *cough*
PLEASE READ ENTIRE THREAD BEFORE FLASHING, D/Ls and Changelog in 2nd Post​
Okay past the joking, this is a stock, rooted KitKat ROM for the ZTE ZMAX. The deodexed version would not boot, so this is odexed. However, this version is free of any King Related apps and I've also removed the little bit of crapware in the device.
FEATURES:
Removal of All King Related Apps
Pre-Rooted
Clear of Bloatware
Added Xposed
Added SuperSU
Removed crappy ZTE/Metro/TMO apps
Overall Clean experience
HOW TO FLASH (NEW INSTRUCTIONS):
1. Place ZIP on SD Card
2. Reboot Into TWRP
3. NANDROID (DO NOT SKIP THIS FOR YOUR SAKE)
4. Don't factory reset the normal way, go to wipe > advanced wipe and click "dalvik cache", "data", "cache" and "system". If you don't, you run the risk of getting an updater-script error (not from the zip, it's a bug in some TWRP builds).
5. New Step: Reboot recovery (in the recovery menu). It will ask if you want to install su, press do not install.
5. Flash the ROM
6. Reboot and rep Butternoob!
BUGS:
Free and clear, you tell me!
ADDITIONAL INFORMATION:
Butternoob has been confirmed to work on all variants of the ZTE ZMAX by at least two people on each variant. THIS IS NOT SUPERBUTTER! For those that don't know, Superbutter will be a heavily modified custom rom. Butternoob was designed to be a stock, clean experience with solid performance. I may add tweaks, but you won't find a lot beyond the stock experience.
CREDITS:
-XDA User Mazer.One for the Bootanimation. I made some edits to his and don't take credit for the original work.
-JCase for helping us get root
-Hroark13 for helping me fix the wifi issue in the updater-script
-ZTE Because I have to... They are banished from ButterNoobia though...
-Masterchief87 for the 4.4.4 base and boot.img
ENJOY, REPORT BUGS, FEEL FREE TO USE AS A BASE AND GIVE PROPER CREDITS!
People have asked what my PayPal email is for donations, it is [email protected] . Never required but always appreciated, I'll give 100% regardless
Changelog:
V2:
-Updated to Android 4.4.4 base
-Band 12 Ready
-Replaced Google Launcher with Apex
--Advice on Apex: Go into menu > apex settings > drawer settings > drawer animation > circle to enable Lollipop-style animation for the drawer opening!
-Fixed SuperUser (All binaries updated)
-Fixed Gapps Force Closes
- New Wallpaper, taste of the SuperButter
-All bugs are squashed
V1:
-Initial Release
-Android 4.4.2
-Removed T-Mobile Apps
-Removed ZTE Apps (i.e. music, file manager, etc.)
DOWNLOAD:
BUTTERNOOB Stock 4.4.4 v2.0
md5: E44F1F84B47D3C4401DA522D0A7494F5
BUTTERNOOB Stock 4.4.2 v1.0
md5: 092cee0504d07fa4decde02d2206a2b7
Mine again
Cricket Zte Z987
Will this work on Cricket ZTE Z987 model
How to enable VOLTE on this rom?
work
will this work on ZMAXX Z958 ?
kas hif said:
will this work on zmaxx z958 ?
Click to expand...
Click to collapse
no. Don't try it. Unless you want to buy another phone.
Having an odd issue with LTE. When I call with LTE enabled, it tries to force the call through VOLTE, rather than handing off to a 4g (or whatever) local band. The call, of course, fails with no audio in or out; is this a known issue, is there a workaround, do I need to re-flash, or is this something weird that nobody's heard about before?
Does this work on Grand X Max + Z987?
Sent from my Z987 using Xparent Blue Tapatalk 2
Zmax Z970 RamDisk Boot.img packing problem
Hi,
Im attempting to repack the ram-disk image for my boot img on my ZTE Zmax z970 running the BN 2.0-oxed ROM. I was trying to use gzip with mkbootimg and it is not working, im assuming due to the fact that my newly repacked ram-disk cpio compressed file was not the same size as the original making the phone fail to boot when the boot.img was sent back to the boot block. My pc is running Ubuntu 14.04-32 bit. I know that the unpack-bootimg and mkbootimg scripts are working correctly because when i repack an unchanged boot.img-ramdisk.cpio.gz file (unpack the img and recreate the boot.img file) and re-upload it to the boot block, the phone boots correctly so I know that my procedures outside of the ram-disk cpio file are correct. My question is, How can I find out how much padding i need on the ram-disk file, where the padding should go, and how to apply the padding to get the file the correct size so that it will work as intended? Any help you can give me would be greatly appreciated.
P.S. I only unpackaged the boot image to change one entry in the ramdisk to the default.prop file. If there is a way to open the compressed cpio file with an archive manager and could update the file once i make my change. that would work as well. I can open the gz file with the archive manager but can not open the cpio folder contained inside.
Thanks,
Much appreciation.....f20062e
I followed your directions. Surprisingly it was super easy! Thanks!!!!!
Does this work on 6.0.1 Zmax Pro Tmobile?
link
Need link to root the z981 and link for twrp to install the recovery image. Thanks all for the hard work this excellent community pours out on a daily basis!
Hi there! I just got this flashed, and I need to know if it's safe to do an OTA update over your ROM.
Thanks a ton!
ZTE 982
Hi there good morning I have a big question, I have the ZTE z982 from MetroPCS I went ahead and rooted and installed TWRP on it. Now I was having some issues trying to flash a custom rom Slimrom to be exact (https://forum.xda-developers.com/zte-zmax/development/slimrom-5-0-2-t3161888) but I kept getting errors about legacy property? So something along those lines. Well I then read somewhere that it could be because of TWRP being outdated. I took it upon myself to look and find an .IMG witch I then flashed and now am stuck with a sorta bootloop flashes on but the screen goes black. Any suggestions? I would really appreciate it.
how did you get past fastboot. my z982 cant find device there?
soLo1Blue said:
Hi there good morning I have a big question, I have the ZTE z982 from MetroPCS I went ahead and rooted and installed TWRP on it. Now I was having some issues trying to flash a custom rom Slimrom to be exact (https://forum.xda-developers.com/zte-zmax/development/slimrom-5-0-2-t3161888) but I kept getting errors about legacy property? So something along those lines. Well I then read somewhere that it could be because of TWRP being outdated. I took it upon myself to look and find an .IMG witch I then flashed and now am stuck with a sorta bootloop flashes on but the screen goes black. Any suggestions? I would really appreciate it.
Click to expand...
Click to collapse
No matter what I do I cannot get this vile little phone to root. It is located in adb but fastboot just isnt there or doesnt' want to find it. I have tried every dang driver you can think of and still nothing in fastboot. I must know its driving me crazy. I have got to where i absolutely hate this phone!
works on z981 ??
I have a system.img file, which I extracted from a 20J KDZ. I would now like to convert it into a flashable zip. I have 2 reasons for this. One, I dont want to have to use LGUP to revert my phone to a 100% stock system. It is much easier to just flash a zip of the system partition. Two, I would like to get into modding and ROM development. I believe that it is best to start from pure stock and make changes from there, instead of basing your work off of something that someone else has already modded.
I found these threads but they're a bit old (Lollipop):
1. http://forum.xda-developers.com/lg-v10/development/lg-h901-stock-img-files-boot-recovery-t3238638
2. http://forum.xda-developers.com/tmobile-lg-v10/development/lg-h901-stock-images-device-restore-t3241170
In one of them a member provided img's for recovery, boot, and system. In the other thread flashable zips of these img's were posted. These are for the Tmo v10. So it's not a matter of whether it can be done, but how. What tools are needed?
I downloaded the zip from one of the aforementioned threads, deleted the boot.img, replaced his system.img with mine, edited updater-script, and zipped up the meta-inf and system.img files with 7zip. I also checked to be sure that the block to be flashed was correct, it is the same (even though my img is for MM). I tried flashing with TWRP, I immediately get an error code 6.
What should I do?
Just off the subject slightly...but Eliminater74 already has a flashable zip (thought TWRP) for the 20J release. Its a 2 Part System.
Eliminator74's zip is modified. I want to take a 100% pure stock system.img (extracted from stock firmware) and put it into a zip that can be flashed in TWRP. When I say stock, that's what I mean. No root, no Xposed, no BusyBox, nothing. This has already been done for Lollipop on the v10, but I have MM. I have already explained why I want to do this. I'm currently looking into whether Superr's Kitchen can accomplish this.
He has a Fully Stock 20J release..just gotta read the thread..
AnonVendetta said:
I have a system.img file, which I extracted from a 20J KDZ. I would now like to convert it into a flashable zip. I have 2 reasons for this. One, I dont want to have to use LGUP to revert my phone to a 100% stock system. It is much easier to just flash a zip of the system partition. Two, I would like to get into modding and ROM development. I believe that it is best to start from pure stock and make changes from there, instead of basing your work off of something that someone else has already modded.
I found these threads but they're a bit old (Lollipop):
1. http://forum.xda-developers.com/lg-v10/development/lg-h901-stock-img-files-boot-recovery-t3238638
2. http://forum.xda-developers.com/tmobile-lg-v10/development/lg-h901-stock-images-device-restore-t3241170
In one of them a member provided img's for recovery, boot, and system. In the other thread flashable zips of these img's were posted. These are for the Tmo v10. So it's not a matter of whether it can be done, but how. What tools are needed?
I downloaded the zip from one of the aforementioned threads, deleted the boot.img, replaced his system.img with mine, edited updater-script, and zipped up the meta-inf and system.img files with 7zip. I also checked to be sure that the block to be flashed was correct, it is the same (even though my img is for MM). I tried flashing with TWRP, I immediately get an error code 6.
What should I do?
Click to expand...
Click to collapse
What tool did you use to extract the KDZ? I am trying to get a stock boot.img for the H901J build and I cannot seem to find it. I used the WindowsLGFirmwareExtract 1.2.5.0 release and all I see are a ton of .bin files and system.img. Is boot.img inside system.img?
@Sippi4x4man: I also used WindowsLGFirmwareExtract. Inside the KDZ there is a DZ and DLL file. Just extract the DZ, then you see lots of BINs. The system.img is split up (since it's around 4GB alone), but the tool can combine the pieces into one file. I was able to figure out how to manually flash the IMG, by running a dd command with TWRP's terminal emulator.
dd if=/external_sd/system.img of=/dev/block/platform/f9824900.sdhci/by-name/system
It takes a few minutes to finish, followed by a message that says no more space is available (I guess /system got filled up). I think when you dd anything you are copying both free and used space, since an IMG is usually just a (sometimes raw) disk image. TWRP will also initially say that no system is installed, I just ignored it, the device boots fine, everything is pure stock, no issues at all. System is mountable after subsequent boots into recovery. I used Magisk and the phh Superuser Magisk module to gain root without modding system partition, and the Magisk version of Xposed. But I would still like to create a flashable zip to automate this. If I figure it out I don't mind uploading it so the community can benefit.
As for the stock boot.img, I would imagine that the boot.bin inside the DZ is probably what you're after. The file size seems about right. However, I tried renaming boot.bin to boot.img and flashing from TWRP. Device wouldn't boot. So maybe there is some other conversion process that needs to be done. I can't think of any other way to obtain a pure stock boot image, extracting it from stock firmware seems like a sure way. If you ever figure it out then please provide a copy. Make sure it isn't patched by SuperSU, Xposed, Magisk, etc. I could maybe merge it into a stock zip.
AnonVendetta said:
@Sippi4x4man: I also used WindowsLGFirmwareExtract. Inside the KDZ there is a DZ and DLL file. Just extract the DZ, then you see lots of BINs. The system.img is split up (since it's around 4GB alone), but the tool can combine the pieces into one file. I was able to figure out how to manually flash the IMG, by running a dd command with TWRP's terminal emulator.
dd if=/external_sd/system.img of=/dev/block/platform/f9824900.sdhci/by-name/system
It takes a few minutes to finish, followed by a message that says no more space is available (I guess /system got filled up). I think when you dd anything you are copying both free and used space, since an IMG is usually just a (sometimes raw) disk image. TWRP will also initially say that no system is installed, I just ignored it, the device boots fine, everything is pure stock, no issues at all. System is mountable after subsequent boots into recovery. I used Magisk and the phh Superuser Magisk module to gain root without modding system partition, and the Magisk version of Xposed. But I would still like to create a flashable zip to automate this. If I figure it out I don't mind uploading it so the community can benefit.
As for the stock boot.img, I would imagine that the boot.bin inside the DZ is probably what you're after. The file size seems about right. However, I tried renaming boot.bin to boot.img and flashing from TWRP. Device wouldn't boot. So maybe there is some other conversion process that needs to be done. I can't think of any other way to obtain a pure stock boot image, extracting it from stock firmware seems like a sure way. If you ever figure it out then please provide a copy. Make sure it isn't patched by SuperSU, Xposed, Magisk, etc. I could maybe merge it into a stock zip.
Click to expand...
Click to collapse
It's been a while from this post... But I'm looking after the same goal you were and got the same error 6 trying the same things you described in your previous posts. Despite of these long 4 years, let me try: did you finally achieve to make the flashable zip with system.img?
I do not own an LG V10 anymore.....it is the most garbage phone I've ever had.
I now use SuperR's Kitchen to create flashable zip from system.img. Works like a charm every time. Downside is that you need a PC to use it. It works for all phones (but you must also have an unlocked bootloader and custom recovery, or you will not be able to flash the zip). There are both free and donate versions, both will work fine.
AnonVendetta said:
I do not own an LG V10 anymore.....it is the most garbage phone I've ever had.
I now use SuperR's Kitchen to create flashable zip from system.img. Works like a charm every time. Downside is that you need a PC to use it. It works for all phones (but you must also have an unlocked bootloader and custom recovery, or you will not be able to flash the zip). There are both free and donate versions, both will work fine.
Click to expand...
Click to collapse
Thank you for your reply. My device is Lenovo Z6 Pro but I thought this wouldn't make a difference.
Just to be sure, what you get with SuperR's Kitchen is a zip including system.img file and not the /system folder, right? Thank you in advance.
Edit: I had tried with other kitchen softwares with no success but SuperR's Kitchen did the job as you said, like a charm. Tons of thanks.
@descarao81: No, SuperR's Kitchen does not include system.img/boot.img, you must provide them yourself. They are device-specific. And system.img is a very large file, so it cannot reasonably be included in the Kitchen zip.
Yeah, maybe I wasn't clear, I meant if the resultant zip would include those raw image files being the original image files provided by the user. It's clear now. Thank you.
Here is how to do it...
1. Go to:
https://forum.xda-developers.com/tm.../lg-h901-stock-images-device-restore-t3241170
Download from the link he provided.
2. Extract the .zip file that you downloaded.
3. Make a new folder called "rom"
4. Copy the META-INF folder from the folder you extracted and place it into the "rom" folder.
5. Download any other flashable rom for your device. Extract it.
6. Go to {EXTRACTED_FLASHABLE_ROM}\META-INF\com\google\android\update-binary in your flashable extracted rom folder. Copy the "update-binary" . Got to the "rom" folder and go to META-INF\com\google\android. Delete the update-binary there and replace it with the one you have copied.
7. Now copy the boot.img from the other rom that is for your device. And place it into the "rom" folder.
8. Now Finally Compress the all the files.
9. Now you will have a flashable system.img.
10. Go to TWRP and flash the .zip that you have just made!
Upytry2 said:
Here is how to do it...
1. Go to:
https://forum.xda-developers.com/tm.../lg-h901-stock-images-device-restore-t3241170
Download from the link he provided.
2. Extract the .zip file that you downloaded.
3. Make a new folder called "rom"
4. Copy the META-INF folder from the folder you extracted and place it into the "rom" folder.
5. Download any other flashable rom for your device. Extract it.
6. Go to {EXTRACTED_FLASHABLE_ROM}\META-INF\com\google\android\update-binary in your flashable extracted rom folder. Copy the "update-binary" . Got to the "rom" folder and go to META-INF\com\google\android. Delete the update-binary there and replace it with the one you have copied.
7. Now copy the boot.img from the other rom that is for your device. And place it into the "rom" folder.
8. Now Finally Compress the all the files.
9. Now you will have a flashable system.img.
10. Go to TWRP and flash the .zip that you have just made!
Click to expand...
Click to collapse
Trying that exactly when im home! Thank you!
How to flash only stock recovery? how to convert "recovery.img.lz4" to "recovery.tar"
Hi all,
I am fairly newb in installing custom ROMs, so apologies if Im misusing any terms. Some time ago I wanted to move a priv-app to system-app, without rooting. I managed to flash TWRP on my Samsung S8 G-950F, and from there moved private app to system app.
Now I would like to go back to the stock recovery img, but I don't know how or if it's even possible. The reason behind this is that my company is deploying Android Work Profile and it is detecting the custom ROM (I assume it is specifically detecting the custom recovery partition)
I tried to find the respective recovery.img for my current stock ROM, but was unable to find it. I can only find for older versions, and from what I read, you can't install older recovery with newer ROM
I can only find the full stock ROM, in .tar.md5 format. opening this with 7zip, I can see the recovery.img.lz4
How do I flash this without altering the OS partition?
Thank you in advance,
Rhaswar
@Rhaswar
Look inside here.
thank you @jwoegerbauer, I have seen this article and it mentions a file called recovery.tar
I don't have that, what I have is the recovery.img.lz4
Is there a conversion that can be done?
Thank you
@Rhaswar
Watch this video: https://www.youtube.com/watch?v=OfrMo1_Rgxc