Related
Hello everyone!
There's an official port of MIUIv5 for our P780 which can be found here.
It needs the Chinese base and not the International one, which means you need to have a Chinese stock ROM before flashing MIUI (flashing over the international stock rom ended in a bootloop for me).
I installed it a week ago and so far it's working flawlessly with a minor issue with the CSipSimple application (opening the Settings dialog causes FC). Didn't find any other bugs, running smooth on the P780 4GB version.
***BEFORE YOU CONTINUE***
Please note, I'm just sharing my own experience with the community, hoping this would be useful to someone.
I don't take any responsibility for any damage to your devices should you decide to follow the steps below!
What you do with the content of this thread is your own responsibility.
The external links are property of their respective authors and all credits go to them. Show your support by hitting the "Thanks" button in the bottom left corner of the respective post.
***
What I've done to run MIUI on the Lenovo P780 (4GB):
I. Backup
Since my phone came pre-rooted I didn't have to do it on my own. There's a good guide for rooting here. VibeROM can't be rooted via framaroot, so you'll have to find another way if you're running it and don't have root.
Download Mobileuncle Tools and backup your IMEI. I suggest keeping it somewhere safe in case of trouble.
Download MtK Droid Tools and backup your whole current ROM (takes a while) so you can flash it back with SmartPhone Flashtool later on if you decide.
II. Flash Chinese stock ROM
Download the Chinese S135 base stock rom along with the drivers and the flash tool from here and flash the S135 following the instructions provided.
Let the phone boot at least once. Copy the MIUI zip on the phone.
III. Flash MIUI
Reboot into recovery (shutdown the phone, then hold Power + Volume UP + Volume DOWN until you see the TEAMWIN logo). Perform a factory reset (Wipe Data + Cache) and Wipe Dalvik Cache.
Select Install and choose the MIUI zip archive, wait for it to flash.
Reboot phone and enjoy MIUI
IV. Some screenshots:
You can see them here.
Finally, I'd like to thank the authors of the threads and articles linked in this post.
Flashed everything works fine, but Second Sim is detected but not working, tried many permutations still the same.
Any info will b very useful, originally forms ROW firmware, help.. Urgent, need dual sim functionality very much
Sent from my iPad
Hi there drkrack,
Have you tried removing SIM1 and only leaving SIM2 in the phone? Is that working?
Since English is not my native language I can't understand what do you mean with "originally forms ROW firmware", can you explain?
The phone was with the ROW firmware when you flashed MIUI?
As far as I know MIUI is based on the chinese firmware so you'll have to flash that and if second sim is not working for you, you might have to flash only the modem from the ROW rom.
You can try replacing your modem driver with another one without reflashing the whole phone.
Check your current modem: Settings->All Settings->About phone-> Baseband version.
Mine's P780.V16, 2013/07/03 17:08 and both SIMs are working fine. You can try with some other versions though.
Backup your IMEIs with Mobileuncle Tools. This is very important because this information could be lost after replacing the modem driver!
Install ES File Explorer or Total Commander and give it root access.
Go to the /system/etc/firmware folder, you'll find a file named modem.img which is the current modem firmware.
Copy it over to the SD card just in case and replace it with another modem.
Download a new modem driver from [1] (sorry, can't post external links yet). I'm running V19 and both SIM cards are working just fine, but your mileage may vary.
After you move the file there be sure that the permissions are 644 (rw- r-- r--) (Owner: read+write, Group: read, Others: read).
Reboot the phone and hopefully you'll have both SIMs working.
Hope this helps,
good luck!
Credits for the Modem images to user belitov from androidbg.com.
[1] hxxps://mega.co.nz/#F!DkZg2BRZ!XsyBsDoB5sRdczecDvZuHw
Thanks for the reply it was a typo.. I meant originally from ROW firmware, flashed Chinese rom s123 and then tried MIUI v5,
All SIM Combinations I've tried, not detecting sim 2 at all.
Same problem with SLX ROM too,
Have a backup of IMEIs
Will try this modem driver img replacing and will let you know
Official MIUI V5 for 8gb P780
How to flash Official MIUI V5 on 8gb P780 ROW. I mean can we flash S135 and then Use TWRP to flash Official MIUI from en.miui.com ?
Thanks.
I using 8gb version. Try put life rom 07. Then flash miui v5 from here lenovo-forums.ru/topic/2073-miui-v5-jb-42-%D0%B4%D0%BB%D1%8F-ideaphone-p780-dual-sim-version/
Sent from my P780 using XDA Premium 4 mobile app
Is there gonna be new Miui above 4.4.25?
I've no idea, but hoping for it. There's already Android 4.4 for our P780 (which runs very smooth btw), but so far nothing from the MIUI team. Will keep you updated if I find something...
i goofed it up
Help me please anyone. I have never tried to fix a ROM to this kind of device before. I've always used HTC till now and I've goofed the install so bad that I can't reflash my back up. The recovery can't read the data or emmc partitions or internal storage. I don't know how to fix it. I can boot recovery but I can't flash anything or go back to my old ROM I was using 8 gb ROW 124 stock rooted TWRP. I can still get the system partition to mount. Any ideas how to fix it?
Yeah, read the other topics in this forum, good people have written fine guides for using MTK Smartphone flash tool to restore their phones. A rule of thumb is always keep your backups somewhere safe, e.g. PC hard disk or external storage card because when flashing the internal memory is at risk of breaking. Post to the relevant topic and good luck.
Load this modem
http://uloz.to/xu758iqP/modem-p780-v20-zip?do=downloadDialog-freeDownloadForm-submit
downloads are not working
On the website the download is not working. the download page shows broken code all down the page.
i got an error "no simcard detected", how to fix it, Help me please! thanks
Seavenes said:
i got an error "no simcard detected", how to fix it, Help me please! thanks
Click to expand...
Click to collapse
Look on settings/about phone on IMEI section and see what is written there.
stympy said:
Look on settings/about phone on IMEI section and see what is written there.
Click to expand...
Click to collapse
Dear stympy, I had finally flashed my p780 row using life rom and finally flashing MIUI using TWRP. Everything works fine except that the internal storage is now only 1 GB, it is so tight to squeeze anything in. Any workaround? Thanks beforehand.
Mr Lukman said:
Dear stympy, I had finally flashed my p780 row using life rom and finally flashing MIUI using TWRP. Everything works fine except that the internal storage is now only 1 GB, it is so tight to squeeze anything in. Any workaround? Thanks beforehand.
Click to expand...
Click to collapse
Hi. What MIUI did you flashed? What version? Do you have any sdcard?
Usually MIUI makes your sdcard internal memory.
Send from my Lenovo P1 Vibe Pro
stympy said:
Hi. What MIUI did you flashed? What version? Do you have any sdcard?
Usually MIUI makes your sdcard internal memory.
Send from my Lenovo P1 Vibe Pro
Click to expand...
Click to collapse
I dont exactly remember which version it was, all I know it was MIUI 5, for redmi note if I had remembered correctly.
I have inserted a 16gb sd card. It is true that it was detected as phone memory. When I installed much apps to test if it has any effect when the internal storage runs out, the gallery and the camera started to acting up, at that time, the internal storage only have 99 mb.
Plus the mic is no longer working, when I make calls, the receiver hears only buzz. When I make a record, nothing recorded.
I love the UI already, but these problems bother me for days already. I hate to reflash stock rom back.
Mr Lukman said:
I dont exactly remember which version it was, all I know it was MIUI 5, for redmi note if I had remembered correctly.
I have inserted a 16gb sd card. It is true that it was detected as phone memory. When I installed much apps to test if it has any effect when the internal storage runs out, the gallery and the camera started to acting up, at that time, the internal storage only have 99 mb.
Plus the mic is no longer working, when I make calls, the receiver hears only buzz. When I make a record, nothing recorded.
I love the UI already, but these problems bother me for days already. I hate to reflash stock rom back.
Click to expand...
Click to collapse
Hi. Flash final stock firmware from Lenovo, S228 ROW. Install TWRP. After all that install latest MIUI, MIUI MINOVO.
I think is one of the best firmware here, made for our phones.
Unfortunately free system and data space it is a problem for this phone, because of the limited hardware.
You have those problems because you installed one KitKat firmware over Jellybean base firmware. This two are not compatible.
Good luck.
Send from my Lenovo P1 Vibe Pro
stympy said:
Hi. Flash final stock firmware from Lenovo, S228 ROW. Install TWRP. After all that install latest MIUI, MIUI MINOVO.
I think is one of the best firmware here, made for our phones.
Unfortunately free system and data space it is a problem for this phone, because of the limited hardware.
You have those problems because you installed one KitKat firmware over Jellybean base firmware. This two are not compatible.
Good luck.
Send from my Lenovo P1 Vibe Pro
Click to expand...
Click to collapse
hi stympy, after the last attempt to revive my phone, finally I was able to boot up after using the 20 seconds trick, flashed the ROM that you suggested me to, finished flashing. The phone was booting up allright. suddenly after the lockscreen appears, it was died again. I have tried the 20 seconds trick repeatedly to revive the phone again, but all to no avail, I guess this is a hardware failure then?
what part(s) that would be damaged? any ideas?
i will take this p780 to a service center, I'd hate to be tricked by the service center. thanks before Sir Stympy
Mr Lukman said:
hi stympy, after the last attempt to revive my phone, finally I was able to boot up after using the 20 seconds trick, flashed the ROM that you suggested me to, finished flashing. The phone was booting up allright. suddenly after the lockscreen appears, it was died again. I have tried the 20 seconds trick repeatedly to revive the phone again, but all to no avail, I guess this is a hardware failure then?
what part(s) that would be damaged? any ideas?
i will take this p780 to a service center, I'd hate to be tricked by the service center. thanks before Sir Stympy
Click to expand...
Click to collapse
Hi. If you pressed 20 secconds on the red button, means that you hard resetted your phone. That means that could be a preloader problem. Try to reflash your stock firmware, so all could be new.
To answers to your question, usually the motherboard is the problem.
But first try to reflash your stock firmware and after flash see if you have to go to service store.
Good luck.
Send from my Lenovo P1 Vibe Pro
So the other day my S3 gave up the ghost, and developed the hard-brick "QHSUSB_DLOAD" error. I have insurance so I was overnighted a new phone, and am sending the old one away. I believe this was related to a long-term power button issue I was having, perhaps a virus, or something. I had not changed anything to the ROM I was using since about October, and the issue just happened now in May.
At any rate, the new S3 I received is an MJB version, Android 4.3, Knox and all that other good stuff. After several failed attempts, I found a method to root this phone and disable Knox. The Warranty Bit is already tripped, so clearly I'm not sending this phone back until it hard bricks as well. I am trying to install the StockMOD ROM that is very popular, however I am being plagued by problem after problem.
I was able to flash a version of CWM Recovery onto my phone, but it was too old and couldn't mount any of the folders. Using ROM Manager, I was able to flash an update to my Recovery, and now it mounts and views all folders properly. However, when I go to install the StockMOD ROM, I continuously get a Status 7 error, something about "expects 5 args, got 3." I wiped the data, cache, and Dalvik, but kept getting this error. So, I had to recover my backup of stock, which didn't go well either. Once my backup was installed, all of my apps kept crashing. Gapps, ROM Manager, everything kept giving me constant FC errors. I had to wipe my data, cache, and Dalvik again and go back to factory default, and reinitialize the phone. Luckily I haven't installed anything of importance on here yet.
A quick search through here states that I need to use TWRP as my Recovery. I've flashed TWRP several times, first using the 2.6... version and then the most recent 2.7.0.0 version, and neither of these will mount any of my folders. It just gives me a litany of errors trying to mount the various locations. I've done Fix Permissions and everything else, TWRP will just NOT mount anything. Other folks say I need the latest PhilZ Recovery. I've downloaded the latest PhilZ Touch 6 and flashed it via Odin. It is giving me the same errors as regular CWM, Status 7, "expecting 5 args, got 3."
I don't know what else to do. My S3 that ran Android 4.0 was so much easier. I had that thing rooted and running a TW based ROM with Nova launcher in about 30 minutes. This phone has been a disaster since I turned it on. I'm just trying to get a 4.3 TW based ROM. I like the Samsung Camera, Calendar, Clock, Messaging, and Contacts apps far better than AOSP versions. But I also want much more customization to my notification drawer toggles. Stock TW doesn't have the toggles I use frequently like the data toggle as well as the torch toggle.
I don't know what I'm doing wrong, because unlike a lot of folks out there, once I find a ROM I like, I stick with it. I'm not constantly updating, changing, or searching for the newest version of Android. There's nothing wrong with that, it just isn't my cup of tea. So does anyone know what I need to do? At this point, I'm about to just give up and use Nova over top of rooted stock TW and call it a day.
Thanks!
Have you tried to go back stock rom using Odin ? I think it might resolve your recovery problem
nosphor said:
Have you tried to go back stock rom using Odin ? I think it might resolve your recovery problem
Click to expand...
Click to collapse
Everything is stock except the recovery. I'm using CWM 6.0.4.7 with PhilZ Touch 6. I'm still using the stock TW 4.3 ROM that shipped with the phone. The only exception is that I'm rooted now.
I suggest you to go back to a 4.1 official stock rom with odin to be sure to have no more issue.
This can help you : http://forum.xda-developers.com/galaxy-s3/general/restore-to-stock-rom-galaxy-s3-i9300-t2187081
Also, don't forget to backup your apps with titanium backup and all your sms :good:
nosphor said:
I suggest you to go back to a 4.1 official stock rom with odin to be sure to have no more issue.
This can help you : http://forum.xda-developers.com/galaxy-s3/general/restore-to-stock-rom-galaxy-s3-i9300-t2187081
Also, don't forget to backup your apps with titanium backup and all your sms :good:
Click to expand...
Click to collapse
Unfortunately, I've heard that it is not possible to revert to anything prior to 4.3 once a phone comes factory installed with 4.3, due to all of the security enhancements and etc. My kernel, modem, and baseband are all factory stock 4.3 MJB. Everyone else on the boards, under various other topics, warn of immediate and sudden death to the phone if you attempt to install a baseband prior to 4.3 MJB.
I'm very surprised to hear that, because recently i've flash stock 4.3 rom and then go back to 4.1.2 to flash a 4.4 rom without any issue and i've got nothing for issues.
Maybe it depends on which country you are ( i'm from France ) ? For what i know , there is a VERY little chance that this downgrade cause dammage to your phone
nosphor said:
I'm very surprised to hear that, because recently i've flash stock 4.3 rom and then go back to 4.1.2 to flash a 4.4 rom without any issue and i've got nothing for issues.
Maybe it depends on which country you are ( i'm from France ) ? For what i know , there is a VERY little chance that this downgrade cause dammage to your phone
Click to expand...
Click to collapse
I'm in the USA. The security features on the I747 US version are far different. I don't know how everyone else is succeeding. I am completely lost.
You are in the wrong forum, anything you try from here will hard brick your phone.
Sent from my GT-I9300 using Tapatalk
Sorry to tell you that, but what you say is not completely true.
Yes, there is a lot of people that rush to give an answer to the question, but there is also people that really like to help people that are in trouble :good:
Please, don't take most of the case for a generality
http://forum.xda-developers.com/showthread.php?t=1756338
Sent from my GT-I9300 using Tapatalk
Yes, i've read this, i know that, that's why i talk about the difference between country, different phone model
My apologies. Thought this was the 747 board. Go ahead and lock this, I'll repost in the correct forum.
Tried TWRP?
Edit: They do keep coming!
I looked into doing it, and there is no way in hell that I should be a) doing it, and b) unleashing it onto the world. It would be bad.
I only have the one phone to test it on and can't risk messing it up and I don't have the experience to work on it if it didn't come out perfectly.
I expect that it will be the last Sprint ROM released for this phone, We're nearing the end of support, so it would be good to have these final versions "fixed" and available
...on the off chance a few developers will jump right in and cook up a few mega ROMs for us.
DQG1 Root and Xposed (rewritten)
On a related note, I installed stock DQA1 DQG1, using the usual CF Autoroot, battery pull thingy process Odin for the ROM and TWRP, then booting once, booting into recovery, and then installing SuperSU and it rooted fine. No loss of settings or anything else as far as I can tell.
I did have to install the latest versions of the Xposed files. After rooting and custom recovery (TWRP works fine), install XposedInstaller_3.1.4.apk first like any other apk, then go to recovery and install Wanam v87.1-alt-sdk23-arm-custom-build, but everything (Xprivacy, etc.) worked fine. Keep in mind, you HAVE to use the "alt" (see the "alt" in the file name above?) version or else it won't work. Samsung made some changes, blah, blah, blah. Much thanks to Wanam!
New side note: I did do a factory wipe, and even after reinstalling everything, and using a ROM that contains bloatware, I still have like 40% more space on the phone. I truly don't know what happened there.
Anyone have any thoughts as to kernel? I downloaded Emotion r26 RC1, and BeastModeKernel 1.0BETA, but I haven't tried them yet.
EDIT: Emotion r26 RC1 works fine, but it doesn't seem like CPU freqs are ever going to stick.
No surprise that neither Emotion nor BeastModeKernel worked; I haven't seen anything else that may.
Thoughts anyone?
Both kernels are good, emotion has a few more options to tweak but I took an update a month or two ago and run NotEdge ROM fine , I just use SO launcher with it because I like TW, also latest xposed is 86.1 and I wish I could do what your asking but it probably would be just as bad you'll be fine with that ROM I just suggested it has everything u just requested just make a nandroid and do it at home in case you do something wrong you can always ODIN back your firmware
Sent from my HTC One M9 using XDA-Developers mobile app
D'oh!!
Eating a little crow here. So far, there have been two three 742 updates, maybe there will be more. Who knows?
But I edited the title of the first post. Again. Again. 741 times.
Do you guys have a link to the stock unrooted rom? My phone is royally screwed right now and still stock. I want to do a clean flash and see if that fixes it.
Over a year later, and the still keep coming.
Hmmmm.
I did take another gander around, but it seems that I would need Linux to do it correctly, so I am still opting out of doing it myself.
mictek said:
Do you guys have a link to the stock unrooted rom? My phone is royally screwed right now and still stock. I want to do a clean flash and see if that fixes it.
Click to expand...
Click to collapse
They all arrive here: https://www.sammobile.com/firmwares/galaxy-note-edge/SM-N915P/ eventually.
Hello i got a note 4 Sprint MM 6.0.1 N910PVPU5DQI5 . i am from Argentina, and i bought the phone used from a guy from USA. (i don`t know how but it`s working with the bands here but i dont know if 4g is working, the guy says it works, maybe i don`t have 4g singal in my zone) .
the phone works fine, but has some srpint stuff and ads that bother me. so i flashed TWRP , and now i am looking for any roms and kernels to flash.
for example, is safe to flash this: https://forum.xda-developers.com/note-4-sprint/development/rom-updated-1-14-2017-t3538051
or should i change something first ???.
Hi, I'm sorry for my bad English, I'm with 1 Moto And first generation that after being looped I was able to unblock and install TWP, and put the Lolipop Rom 5.1, installed without errors, but when I started the android, I set it up and then when I restarted it Device it enters that white screen that appears that the bootloader was unlocked and falls straight into TWRP, does not start Android at all, could they help me? thanks
Nikakz said:
Hi, I'm sorry for my bad English, I'm with 1 Moto And first generation that after being looped I was able to unblock and install TWP, and put the Lolipop Rom 5.1, installed without errors, but when I started the android, I set it up and then when I restarted it Device it enters that white screen that appears that the bootloader was unlocked and falls straight into TWRP, does not start Android at all, could they help me? thanks
Click to expand...
Click to collapse
1. Flash stock lollipop
2. Reboot bootloader
3. Volume up select, Normal powerup
Rajendran Rasa said:
1. Flash stock lollipop
2. Reboot bootloader
3. Volume up select, Normal powerup
Click to expand...
Click to collapse
Guy
Ok, thanks I'll try
Nikakz said:
Guy
Ok, thanks I'll try
Click to expand...
Click to collapse
I tried, accept the installation of Rom, but it is on the screen of the logo starting and it does not leave, I do not know what to do to work.
Nikakz said:
I tried, accept the installation of Rom, but it is on the screen of the logo starting and it does not leave, I do not know what to do to work.
Click to expand...
Click to collapse
Sometimes a new flash takes nearly half an hour to boot. I faced once.. Did u wait for sometime?
vyshak.sk said:
Sometimes a new flash takes nearly half an hour to boot. I faced once.. Did u wait for sometime?
Click to expand...
Click to collapse
Yes, I waited more than 24 hours and nothing and no other flash I tried installs only this one and does not leave the startup logo, very strange this device, I needed a solution.
Nikakz said:
Yes, I waited more than 24 hours and nothing and no other flash I tried installs only this one and does not leave the startup logo, very strange this device, I needed a solution.
Click to expand...
Click to collapse
Flash latest twrp 3.x. You can find it from official lineage os thread under original development section.
Then flash any stable marshmallow custom rom.
_sushan_ said:
Flash latest twrp 3.x. You can find it from official lineage os thread under original development section.
Then flash any stable marshmallow custom rom.
Click to expand...
Click to collapse
Hello everyone, I put a CM13 and she accepted the installation and updated the TWRP also, I put the gaps, I did everything, Android starts, but continues with the problem of falling straight into recovery and going to TWRP and something else when I can do it Start it is not with network signal, recohece the chip, but does not give network signal. I do not know what to do with this device anymore. Could you try to install lolipop on it? Which version could I put? Would it be because of being in 6? I installed this rom cm-13.0-20161022-NIGHTLY-condor only installed it right. thanks
Nikakz said:
Hello everyone, I put a CM13 and she accepted the installation and updated the TWRP also, I put the gaps, I did everything, Android starts, but continues with the problem of falling straight into recovery and going to TWRP and something else when I can do it Start it is not with network signal, recohece the chip, but does not give network signal. I do not know what to do with this device anymore. Could you try to install lolipop on it? Which version could I put? Would it be because of being in 6? I installed this rom cm-13.0-20161022-NIGHTLY-condor only installed it right. thanks
Click to expand...
Click to collapse
Looks like you are using a very old cm 13 build.
Try this one. https://www.androidfilehost.com/?fid=385035244224413102
This is cm 13 snapshot build by @Andersonmends.
Clean install is recommended ie wipe cache data internal and then flash this with pico gapps
Nikakz said:
Hello everyone, I put a CM13 and she accepted the installation and updated the TWRP also, I put the gaps, I did everything, Android starts, but continues with the problem of falling straight into recovery and going to TWRP and something else when I can do it Start it is not with network signal, recohece the chip, but does not give network signal. I do not know what to do with this device anymore. Could you try to install lolipop on it? Which version could I put? Would it be because of being in 6? I installed this rom cm-13.0-20161022-NIGHTLY-condor only installed it right. thanks
Click to expand...
Click to collapse
You flashed latest twrp inside old twrp recovery itself?right?
Rajendran Rasa said:
You flashed latest twrp inside old twrp recovery itself?right?
Click to expand...
Click to collapse
Yes. Out the problem now with the network signal that is not picking up, it recognizes the chip, but it is without signal.
Nikakz said:
Yes. Out the problem now with the network signal that is not picking up, it recognizes the chip, but it is without signal.
Click to expand...
Click to collapse
Flash radio files. Google it for ur device.
_sushan_ said:
Looks like you are using a very old cm 13 build.
Try this one. https://www.androidfilehost.com/?fid=385035244224413102
This is cm 13 snapshot build by @Andersonmends.
Clean install is recommended ie wipe cache data internal and then flash this with pico gapps
Click to expand...
Click to collapse
Hello everyone, I installed Rom CM that the forum colleague indicated and the gapps and installed, everything went well in the installation and initialized Android, was very good in relation to the previous problems, nor know how to thank you. Just when I call it goes to the screen of the fastboot direct and I do not know how to make it not happen, but at least when the motorola logo appears it starts Android. I only notice a certain oscillation in the signal of the network of the operator and I did not find any file to download and to solve this problem of the signal of the network (or radio as you say) if they know where under some that can be installed for that Rom I thank you. I'll leave it for now and see if it's fixing. Thank you very much, ah, I would like to know if I should install the CM updates that appear on the device, it was so good that I'm afraid to accept it and thunder to give it a problem. Another thing he had TV, how to install this Rom? thanks
Hello everyone, I installed Rom CM that the forum colleague indicated and the gapps and installed, everything went well in the installation and initialized Android, was very good in relation to the previous problems, nor know how to thank you. Just when I call it goes to the screen of the fastboot direct and I do not know how to make it not happen, but at least when the motorola logo appears it starts Android. I only notice a certain oscillation in the signal of the network of the operator and I did not find any file to download and to solve this problem of the signal of the network (or radio as you say) if they know where under some that can be installed for that Rom I thank you. I'll leave it for now and see if it's fixing. Thank you very much, ah, I would like to know if I should install the CM updates that appear on the device, it was so good that I'm afraid to accept it and thunder to give it a problem. Another thing he had TV, how to install this Rom? thanks
Nikakz said:
Hello everyone, I installed Rom CM that the forum colleague indicated and the gapps and installed, everything went well in the installation and initialized Android, was very good in relation to the previous problems, nor know how to thank you. Just when I call it goes to the screen of the fastboot direct and I do not know how to make it not happen, but at least when the motorola logo appears it starts Android. I only notice a certain oscillation in the signal of the network of the operator and I did not find any file to download and to solve this problem of the signal of the network (or radio as you say) if they know where under some that can be installed for that Rom I thank you. I'll leave it for now and see if it's fixing. Thank you very much, ah, I would like to know if I should install the CM updates that appear on the device, it was so good that I'm afraid to accept it and thunder to give it a problem. Another thing he had TV, how to install this Rom? thanks
Click to expand...
Click to collapse
You can try flashing radio files.
Find one for your device from this thread : https://forum.xda-developers.com/moto-e/development/rom-stock-motorola-lollipop-rom-t3167111
I m not sure why ur device is rebooting in fastboot. Generally the most common cause for reboot in moto e is faulty lock button. But that jst reboots the phone. You can try using the phone without pressing the lock button. Use volume key wake up option and double tap to status bar to lock.
Also did you wipe cache data internal before flashing ?
And regarding the updates it depends on you. The updates you are for sering are for cm 14 / lineage os. I personally believe that nougat is still not stable enough and features are still missing hence i advised you for mashmallow roms. But if you want to try u can visit the various threads in android development and android development sections and will find nougat roms.
For installing / flashing instructions read guides in general section.
_sushan_ said:
You can try flashing radio files.
Find one for your device from this thread : https://forum.xda-developers.com/moto-e/development/rom-stock-motorola-lollipop-rom-t3167111
I m not sure why ur device is rebooting in fastboot. Generally the most common cause for reboot in moto e is faulty lock button. But that jst reboots the phone. You can try using the phone without pressing the lock button. Use volume key wake up option and double tap to status bar to lock.
Also did you wipe cache data internal before flashing ?
And regarding the updates it depends on you. The updates you are for sering are for cm 14 / lineage os. I personally believe that nougat is still not stable enough and features are still missing hence i advised you for mashmallow roms. But if you want to try u can visit the various threads in android development and android development sections and will find nougat roms.
For installing / flashing instructions read guides in general section.
Click to expand...
Click to collapse
Okay, thank you, it stabilized the signal from the network operator. I will leave as is and will not make updates at the moment. I just want to know how to make the TV function work. Thanks everyone for the help and I do not know how to mark a topic as closed in the forum.
So I have got this Samsung Galaxy Tab 2 3G 10.1" that has been lying in a cupboard for a around a year, mainly because I've been busy Now there's a family member of mine who would really need a tablet so I thought this one would be perfect for her!
From thinking I went on to doing and started with getting rid of the stock software and installing some nice custom ROM.
As I found out i couldn't use USB (probably busted data-cable), I rooted the tab using KingRoot and went on installing CWM recovery. Afterwards long story short: I've tried both CWM and TWRP, different ROM and android versions (Lineage, CM, Slim etc.) and different GApps packages from different developers but the problem still seems to come up :crying:
The problem itself is that when I've installed any of the above mentioned ROMs, all the GApps seem to not have been installed correctly (even though the installation process in recovery went smoothly) and basically none of them works (notifications saying that any GApp has stopped keep on coming up and I can't find any Google app in the menu except something things like "com.google.android..." or "com.android.vending...") otherwise everything seems perfectly fine.
Maybe there are others here experiencing the same issue or there's someone who knows how to fix this here, any help will be very appreciated :good:
Hello,
First, have you checked that the ROM you flashed was fully compatible with your device? Yes, this is obvious, but I have to ask.
Second, I'm not a ROM flashing via custom recovery fan... The best way to efficiently flash a ROM in my opinion is Odin-Download mode but whatever (your USB port is screwed, so pfu.)
Redownloading apps doesn't work for you? (updating the apk may fix that!)
Atronid said:
Hello,
First, have you checked that the ROM you flashed was fully compatible with your device? Yes, this is obvious, but I have to ask.
Second, I'm not a ROM flashing via custom recovery fan... The best way to efficiently flash a ROM in my opinion is Odin-Download mode but whatever (your USB port is screwed, so pfu.)
Redownloading apps doesn't work for you? (updating the apk may fix that!)
Click to expand...
Click to collapse
Thanks for your reply!
Yes, I do have used ROMs compatible with my device as they've all are made for espresso3g (which is my device).
I know it's not really the best way but I'll keep on trying with custom recovery for some more time and then perhaps try buying a new cable, and see if that works.
Tried installing Google Play Store from APK both on a clean ROM without GApps and with, but it still doesn't run and keeps on saying that either Google Play Store or "com.google.process.gapps" has stopped.
Alright...
I'm out of idea x/
lordquestionmark said:
The problem itself is that when I've installed any of the above mentioned ROMs, all the GApps seem to not have been installed correctly (even though the installation process in recovery went smoothly) and basically none of them works (notifications saying that any GApp has stopped keep on coming up and I can't find any Google app in the menu except something things like "com.google.android..." or "com.android.vending...") otherwise everything seems perfectly fine.
Maybe there are others here experiencing the same issue or there's someone who knows how to fix this here, any help will be very appreciated :good:
Click to expand...
Click to collapse
Hello...!
You could try the following....
1. make absolutely sure you are using the correct version of gapps for the custom rom you are currently using. If your custom rom is on android 6, you need gapps for android 6 for example.
2. after flashing gapps wipe cache/dalvik and make a factory reset BEFORE exiting twrp. You will lose personal data but since you are preparing to give the device to somebody else that should not be much of a concern.
Let me know if it helps, if it does not, I might be able to try and provide additional suggestions.
Good luck!
r&xp said:
Hello...!
You could try the following....
1. make absolutely sure you are using the correct version of gapps for the custom rom you are currently using. If your custom rom is on android 6, you need gapps for android 6 for example.
2. after flashing gapps wipe cache/dalvik and make a factory reset BEFORE exiting twrp. You will lose personal data but since you are preparing to give the device to somebody else that should not be much of a concern.
Let me know if it helps, if it does not, I might be able to try and provide additional suggestions.
Good luck!
Click to expand...
Click to collapse
Hi and thanks for your reply!
1. The ROMs I've been trying to install are all android 6.0.1 and I've been trying with different OpenGApps packages for the 6.0 version which should work (except CM 12 which is android 5.1 with which I've tried OpenGApps and A-Gapps for Android 5.1).
2. Tried that with 3 different ROMs today and the results are following: Slimrom gets stuck in setupwizard which doesn't start, CM 12 starts but the same error as first seems to appear (I get notifications about GApps which stop working) and Lineage bootloops the lineage start screen.
lordquestionmark said:
Hi and thanks for your reply!
1. The ROMs I've been trying to install are all android 6.0.1 and I've been trying with different OpenGApps packages for the 6.0 version which should work (except CM 12 which is android 5.1 with which I've tried OpenGApps and A-Gapps for Android 5.1).
2. Tried that with 3 different ROMs today and the results are following: Slimrom gets stuck in setupwizard which doesn't start, CM 12 starts but the same error as first to appear (I get notifications about GApps which stop working) and Lineage bootloops the lineage start screen.
Click to expand...
Click to collapse
Ok...
This is what I would do if it was my device and I was facing what you are describing. It might take some time and a little patience to do everything described here, but it might also work.
1. Usin Odin, flash latest available official rom for the device. Let it boot and complete setup.
2. Use odin and use CF autoroot to root. Again boot and complete setup.
3. Flash Twrp. Enter Twrp and flash latest flashable supersu.zip. At this time I believe is version 2.82. Again boot and let it reach your welcome screen.
4. Enter Twrp. Enter advanced wipe. Wipe everything except external SD and usb at least 3 times. Do not exit twrp.
5. Install you rom. Do not exit Twrp.
6. After installing your rom, Twrp will ask you if you want to wipe cache/dalvik. "Yes" but DO NOT reboot.
7. Install correct version of gapps for your custom rom (correct both android version and architecture version). Again twrp will ask you to wipe cache/dalvik. "Yes" and this time reboot.
See what happens. If it gets stuck, try entering twrp again and do a factory reset only, only once and reboot again.
If that fails again... I will at a loss here myself too...
I did a quick search here on xda on P5100, I am providing some links that you can take a look at. You probably already searched yourself but you never know...
https://forum.xda-developers.com/ga...-2-unified/rom-cyanogenmod-13-cm13-0-t3303798
https://forum.xda-developers.com/galaxy-tab-2/10-inch-development/rom-blissmallow-t3312320
https://forum.xda-developers.com/showthread.php?t=1686514
https://forum.xda-developers.com/showthread.php?t=2581782
https://forum.xda-developers.com/galaxy-tab-2/10-inch-development/rom-candy-5-v2-5-5-t3136904
If nothing else helps, perhaps the best way to go around this would be to find a custom rom with at least some google apps pre-installed, in order to save you the trouble you are currently facing.
lordquestionmark said:
So I have got this Samsung Galaxy Tab 2 3G 10.1" that has been lying in a cupboard for a around a year, mainly because I've been busy Now there's a family member of mine who would really need a tablet so I thought this one would be perfect for her!
From thinking I went on to doing and started with getting rid of the stock software and installing some nice custom ROM.
As I found out i couldn't use USB (probably busted data-cable), I rooted the tab using KingRoot and went on installing CWM recovery. Afterwards long story short: I've tried both CWM and TWRP, different ROM and android versions (Lineage, CM, Slim etc.) and different GApps packages from different developers but the problem still seems to come up :crying:
The problem itself is that when I've installed any of the above mentioned ROMs, all the GApps seem to not have been installed correctly (even though the installation process in recovery went smoothly) and basically none of them works (notifications saying that any GApp has stopped keep on coming up and I can't find any Google app in the menu except something things like "com.google.android..." or "com.android.vending...") otherwise everything seems perfectly fine.
Maybe there are others here experiencing the same issue or there's someone who knows how to fix this here, any help will be very appreciated :good:
Click to expand...
Click to collapse
did you find a solution
lordquestionmark said:
So I have got this Samsung Galaxy Tab 2 3G 10.1" that has been lying in a cupboard for a around a year, mainly because I've been busy Now there's a family member of mine who would really need a tablet so I thought this one would be perfect for her!
From thinking I went on to doing and started with getting rid of the stock software and installing some nice custom ROM.
As I found out i couldn't use USB (probably busted data-cable), I rooted the tab using KingRoot and went on installing CWM recovery. Afterwards long story short: I've tried both CWM and TWRP, different ROM and android versions (Lineage, CM, Slim etc.) and different GApps packages from different developers but the problem still seems to come up :crying:
The problem itself is that when I've installed any of the above mentioned ROMs, all the GApps seem to not have been installed correctly (even though the installation process in recovery went smoothly) and basically none of them works (notifications saying that any GApp has stopped keep on coming up and I can't find any Google app in the menu except something things like "com.google.android..." or "com.android.vending...") otherwise everything seems perfectly fine.
Maybe there are others here experiencing the same issue or there's someone who knows how to fix this here, any help will be very appreciated :good:
Click to expand...
Click to collapse
Hey, just try uninstalling Google play services and install them again. I faced the same issue and now it's all working on my Samsung Galaxy Core 2