My mi pad currently running linageOS 14.1( already merge system partation to 1.2GB) I want to change it back to MIUI. Can I flash the rom from MIUI website on top of linageOS? Or do I need to change the partation again?
Need suggestions, thanks.
You need to change the partition again.
Related
Installed CM12.1 with gapps 5.1 on my samsung galaxy s2 I9100 but the play store does not work, please can you help me?
Does CM12.1 is too much for my phone?
If so, what the most advisable and later that is running at 100%?
If you can show me where I can download the necessary files and newer thank.
thank you
zb007 said:
Installed CM12.1 with gapps 5.1 on my samsung galaxy s2 I9100 but the play store does not work, please can you help me?
Does CM12.1 is too much for my phone?
If so, what the most advisable and later that is running at 100%?
If you can show me where I can download the necessary files and newer thank.
thank you
Click to expand...
Click to collapse
You probably ran out of /system space. Which gapps did you install? On stock partitions, you need a small gapps package to make it work properly. If you want a rom "running at 100%" you might be better off with a stable rom 4.4.4 or earlier as the newer lollipop roms are not yet stable(they still have bugs and/or missing features). Maybe not yet mature is a better way of explaining.
For gapps I would recommend CM GApps
For the rom I would suggest the 05/08 build as explained in the dev thread(if you want LP)
If you want a more stable rom I would try Slimsaber 4.4.4 by @fusionjack. It's awesome, but most of the major roms from kitkat and earlier are nice and stable and worth a look depending on what you want
Oh, and if you decide to go with slimsaber or another kitkat rom I use Minimal Edition GApps, but you can use any 4.4.x gapps you like
Thank you noppy22
I appreciate the help, I will try with the minimum version 5.1. if not solve I will try with the second alternative presented me.
If possible and as I am new to do these things, I would like him to explain the steps to be as follows:
How have the full version of gapps and want to install the version that aconselhor me the CM GApps what I have to do?
How do I remove the version I have already installed?
If after not work how do I delete the android version 5.1 and gapps I have to install the 4.4.4 you advise me? The kernel that I serve?
My android presents these data at this point where only the play store does not.
Cyanogen the 12.1 s v.1.0-i9100
android 5.1
3.0.64 kernel-cm g7e7a10d
21/04/15
compilation date
21/04/15
compilation number
cm-i9100-userdebug 5.1 LMY470
c2e395cca3 test-keys
What changes should I make?
zb007 said:
How have the full version of gapps and want to install the version that aconselhor me the CM GApps what I have to do?
How do I remove the version I have already installed?
If after not work how do I delete the android version 5.1 and gapps I have to install the 4.4.4 you advise me? The kernel that I serve?
Click to expand...
Click to collapse
I'm not sure what you mean by full gapps. The smaller the gapps package, the better. The gapps are installed to your /system, so any other apps you want, you can install from play store(this is what I would recommend). If you want a bigger gapps package with apps like youtube or others you will need to repartition your phone, as you won't have enough room in your /system partition otherwise.
Here are two threads that will give you information if you want to do that. HERE and HERE. Just read carefully so you understand perfectly before you do anything.
To remove the gapps I would format /system. There may be other ways of just wiping gapps, not sure; you could try just flashing a new one over the old one, but I wouldn't recommend this. The only downside to formatting /system is you will wipe your rom as well. But you can just reflash it.
To go back to 4.4.4, just do a full wipe as you would to go to 5.1, using the recovery that came with cm.
zb007 said:
My android presents these data at this point where only the play store does not.
Click to expand...
Click to collapse
Do you mean it works except for play store? Once you install the rom and small gapps you should be able to use play store
Thanks again
I will do what you say.
Yes only the play store dont work.
E: signature verification failed
Thanks for the help, as I could and was working well.
Now I have another of my milher equal and tried to do the same, put the 3 files on sd card
CWM
Cyenogen 12.1
Gapps minimal
That worked perfectly on the other.
This when trying to root with the CWM file that I used the other gives the error
E: signature verification failed
Hello developer s
What was the real problem behind any custom ROM that having no VOLTE option.
In future is there any working solution.
Some one is trying to fix.
What are the obstacles coming in the process of fixing this issue.
How cm14 n so are supporting VOLTE without MIUI nougat base.
Why don't we take MIUI marsallow VOLTE to merge in cm13.
Kindly provide some useful info.
Coz I hate MIUI ROM it's a really laggy and buggy.
UI is very boring.
That's why I am using cm 13 base aicp without working VOLTE.
THANKS
Sorry for my bad English.
orphansmith said:
Hello developer s
What was the real problem behind any custom ROM that having no VOLTE option.
In future is there any working solution.
Some one is trying to fix.
What are the obstacles coming in the process of fixing this issue.
How cm14 n so are supporting VOLTE without MIUI nougat base.
Why don't we take MIUI marsallow VOLTE to merge in cm13.
Kindly provide some useful info.
Coz I hate MIUI ROM it's a really laggy and buggy.
UI is very boring.
That's why I am using cm 13 base aicp without working VOLTE.
THANKS
Sorry for my bad English.
Click to expand...
Click to collapse
This is a sureshot way of getting VoLTE in any Custom ROM.
Try this. It worked for me.
1) Wipe Dalvik Cache, Cache, System, Data. (Not Internal Storage) Flash MIUI Global Beta 6.11.3. Here is the link, http://bigota.d.miui.com/6.11.3/miui_HMNote3ProGlobal_6.11.3_233ef61784_6.0.zip
2) Flash Lazy Flasher to edit the boot.img to prevent bootloops and to disable encryption and dm-verity. Here is the link, https://drive.google.com/file/d/0ByWEieei-0nyMTR4R0dxWk9BTms/view
3) Boot to MIUI. VoLTE will work here. Go to Recovery and backip the EFS Partition.
4) Wipe Dalvik Cache, Cache, System, Data. (Not Internal Storage) Now, flash CM 14 Firmware, then RR v5.8.0-20161201 and then GApps. https://www.androidfilehost.com/?fid=385035244224398629
https://www.androidfilehost.com/?fid=385035244224402818
http://opengapps.org/
5) Boot your phone to the RR ROM. In my case, I got the HD sign without restoring the EFS. If you don't get, restore EFS Partition and you're good to go!
Hello There!
Which will be the best rom for Kate?
I used RR Nougat by now.Witch Psyman´s Firmware for VoLTE and the Camera flash zip.
Edit:
Should have said:
I just want a stable rom with good german translation. Less as possible extra Programms. Just enough with little Goole (Nano i have) And not must installed Apps.
Smothely run etc.
And well a good UKW Radio connection.
And pls with SuperSu or Superuser not the new Magic etc.
Additional question:
I didnt restart into normal rom after installing TWRP but internal Storage is correct. So im Ok? Or did i a crucial mistake?
First of all, there is no "best ROM". Everybody feels different about roms!
I would suggest the official LineageOS.
You can flash SuperSU manually. Just be sure you flash the latest zip.
Ok, which SuperSu should i flash=?
In the Lineage OS Thread it is written.
Official weekly builds: https://download.lineageos.org/kenzo (IMPORTANT you read this before proceeding with installation!)
I dont understand that good. https://forum.xda-developers.com/re...neageos-14-t3542491/post70719075#post70719075
Additional: As i wrote i Flashed Psymans Flashlight firmware and VoLTE do i need to flash it again?
Hello,
I want to personalize my mido.
So i think that the best way is to install base(rom) and add some mods.
1. What's rom should be good for base? The more compability the better. Maybe LOS 14.1?
2. What about kernel? Stock or something other? I need stability.
3. Root... magisk
4. Do I need xposed?
5. Good mod for camera. I need manual focus and iso working. Can be bacon camera, but i need these options - I dont have it on epic rom/moded miui.
6. Audio mod - I dont have any idea.
So, can you help?
The easiest way to personalize Miui is a launcher and an icon pack. Other things, like Magisk, for me, is a way of having more privileges to make things that , other way, you could not.
What rom you must use, well, it is up to you. You must think of the things you have with stock rom (Miui) or another rom, like Lineage or RR. Personally I like very much miui and I do not need pure android because many things a use in my day by day are in MIUI and If I would change rom I would have to install apks for them
About Xposed, I think is not optimiced for Miui but for others rom like RR or Lineage.
To change Miui, install Xposed or Magisk, you must unlock the bootloader and take some risks.
Hi All
Since there is all sorts of development running at the moment and the treble Pie has been put within radar, I thought I make a grouped topic/discussion only for this sGSI version. Some known install procedure, adds and also the pros and cons about this version so everybody can learn.
As I have seen and heared, some users are confused and didn't find all data and files needed to boot, I grouped them here in order and add some other files to finalize what you can do with this version at the moment.
I give all the credits to those who made this possible so far.
Correct me where needed.
Base : https://forum.xda-developers.com/pr...ment/rom-android-p-developer-preview-t3816659 thnx @erfanoabdi
Pre-requirements :
*unlocked bootloader
*B12 Nfound
Files needed :
1. TWRP 3.2.1.8 treble thnx @NFound
2. AXON7_GPT_ADD_VENDOR_800MB.zip @djkuz
3. Project_Treble_v1.1_Axon7-by-NFound.zip @NFound
4. P-PR1-sGSI-Aonly.zip - extract the 7z to the img and put it on extSD
5. POST-sGSI_1_v0.14.zip
6. POST-sGSI_2_v0.17.zip
7. POST-sGSI_3_v0.5.zip
Installation :
a Install TWRP 3.2.1-8 - TREBLE, reboot into twrp
b reboot to EDL
c Install AXON7_GPT_ADD_VENDOR_800MB.zip through Miflash (so extract files to same folder name and search it via Miflash)
d reboot into twrp again
e format system, data, cache, wipe vendor
f install Project_Treble_v1.1_Axon7-by-NFound.zip. This will 'resize' vendor to a +-500mb / afaik also compatible with LOS15 (treble) now, betas(B01,B12), all official roms A7, GSI's
g install P-PR1-sGSI-Aonly.zip, so tap install/img and choose the img file and flash
h install the 1, 2, and 3 Post-sGSI files in order, so mount /vendor and flash those 3 files.
i Reboot
After boot :
*use the gms , install it and create an account on google. It will speed up installation
* use Gcam to have a working camera : https://github.com/AospExtended/platform_vendor_aosp/blob/8.1.x/prebuilt/common/apk/Gcam.apk
* use this patch to have settings working in camera : https://forum.xda-developers.com/showpost.php?p=77296562&postcount=55 thnx @yarecco
* disable the navbar with : go to vendor / build.prop and add "qemu.hw.mainkeys=1"
or flash this A2017X Vendor NavBar Remover
* reverse softkeys : https://forum.xda-developers.com/axon-7/themes/mod-soft-key-reverse-using-synapticsdsx-t3827574
* for those who have call issues : https://forum.xda-developers.com/showpost.php?p=77285228&postcount=22 thnx @atakan33
* best, even on v1.1 to flash the framework overlay again : https://www.sendspace.com/file/x7jv8q. Makes DT2W work as it should !
*flash the pr1-lag-fix.zip to get a smoother experience thnx @atakan33 to mention it
As far as I know these things work :
*playstore....
*magisk 16.4, 16.7 working ok - safetynet pass ok confirmed on 16.7 - all should work, only a temp problem : https://twitter.com/topjohnwu/status/1029239685338419200?s=09
*full root r/w
*modules like youtube, jojoc....
*adaway
*call app but with ECHO so other persons hear themselves... for some members, even without Volte, the echo is note there and call volume can be adjusted
*no overheating with the v1.1
*better battery performance since v1.1
*dt2w works if you flash the framework overlay again when you're already booted. I uploaded it here since it got lost : https://www.sendspace.com/file/x7jv8q
* fast charge works, no heating at all
* spilt screen : just long press the icon in recents thnx @SantiHurtado
Not working :
*auto-brightness...or not in a way we're used to.... - there is no quick settings toggle, so if you want to untick auto, go to settings/display...
*dolby , but try this : https://forum.xda-developers.com/showpost.php?p=77289658&postcount=31 thnx @yarecco NOT WORKING - tested it myself and even bootloop when removing them. So if you want to try BACKUP FIRST !
*usb bug : greyed out so no control - in dev options you can choose an option but the usb setting still will be greyed out
......
Hope you can join in to give your opinion and add some more feedback to the pros and cons.
Join telegram Axon7 (s)GSI trebleSHOOT
Thanks man.
Based on AospExtended thread, I have done step 1 and 2. At present, I am on the latest AospExtended treble. I was wondering if someone can tell me if I need to do step 3 to 7. Do I need these ONLY if I want to try other GSI Roms? Or, do I need to do all of them regardless sooner or later?
Thanks.
EDIT: After more reading on the other thread, I think I understand more about this. Step 4 to 7 are to install the GSI rom. I guess my question now is if for now I want to keep using the latest AospExtended treble (Oreo), do I need to do step 3? Thanks
The GCAM link does not work. Saying file too large to display.
have installed Magisk 16.7 and safety pass is true
Gesendet von meinem ZTE A2017G mit Tapatalk
What is meant by sGSI or semi GSI?
ttkian said:
Based on AospExtended thread, I have done step 1 and 2. At present, I am on the latest AospExtended treble. I was wondering if someone can tell me if I need to do step 3 to 7. Do I need these ONLY if I want to try other GSI Roms? Or, do I need to do all of them regardless sooner or later?
Thanks.
EDIT: After more reading on the other thread, I think I understand more about this. Step 4 to 7 are to install the GSI rom. I guess my question now is if for now I want to keep using the latest AospExtended treble (Oreo), do I need to do step 3? Thanks
Click to expand...
Click to collapse
For this semiGSI you will need all steps a to i. For GSI's you can skip step h afaik.
Raffikie said:
The GCAM link does not work. Saying file too large to display.
Click to expand...
Click to collapse
Is working fine. Go to the page and just download
Rennert said:
have installed Magisk 16.7 and safety pass is true
Gesendet von meinem ZTE A2017G mit Tapatalk
Click to expand...
Click to collapse
Are you on v1.0 or v1.1 ? Because as for me on v1.0 I had a pass but on v1.1 it was a no go. Special setting used ?
EDIT : safetynet works, only cant be checked for the moment : https://twitter.com/topjohnwu/status/1029239685338419200?s=09
StickMonster said:
What is meant by sGSI or semi GSI?
Click to expand...
Click to collapse
That's the same. But Oki explained it imo very well here : https://forum.xda-developers.com/showpost.php?p=77328471&postcount=4793
A2017X_vendor_navbar_remover
For those who don't want to mess with their build.prop, just flash this and it will remove the navbar (if there is).
It'll work on all vendor build.props in future.
Backup of original build.prop will be created in /vendor so you can always revert if needed.
1. Since DT2W wasn't working, as in my experience and many others, on V1.1, I reflashed the Framework Overlay again and DT2W is working now.
2. Also, seems with Volte working properly, @kountry83, could manage to get the incall echo disappear and make decent calls. Even call volume is adjustable.
We're testing on TG (feel free to join too) further on.
3. The Dolby DDP and Audiomodification Lib seems not to work properly. Even bootloop when removing it...Did someone succeed in Dolby ?
4. flash the pr1-lag-fix.zip to get a smoother experience thnx @atakan33 to mention it
Dolby doesn't work, FC when start app. I don't have remove it, but can test it.
must i change the bootstack? because yesterday i tried to install PR1 but it cannot boot because i use universal bootstack that used on LOS 16 treble, i use Bootstack 12 and it boot, what is the best bootstack for this? thank you
shuemantri said:
must i change the bootstack? because yesterday i tried to install PR1 but it cannot boot because i use universal bootstack that used on LOS 16 treble, i use Bootstack 12 and it boot, what is the best bootstack for this? thank you
Click to expand...
Click to collapse
You're good to go on the B12 bootstack from NFound. Rest is in description of OP to boot any (s)GSI in future :good: