My baby kept pressing the screen (very gently) for a couple of minute when it was in lockscreen.
After that the screen became crazy ass hell. Its working by itself, the back of phone is getting hot and wont respond to touch commands.
I wonder if I messed up the screen digitalizer? should I change the hole screen now?
It does sound like the digitizer might but a goner. I would say change the whole thing, changing the digitizer alone isn't easy if not impossible (for me anyway). i have replaced my screen twice now quite cheaply so i would opt for changing the DIGI & LCD
adbraz said:
My baby kept pressing the screen (very gently) for a couple of minute when it was in lockscreen.
After that the screen became crazy ass hell. Its working by itself, the back of phone is getting hot and wont respond to touch commands.
I wonder if I messed up the screen digitalizer? should I change the hole screen now?
Click to expand...
Click to collapse
Change the whole panel can be done in 20 to 30 min time even for beginners. Also make sure you buy a OEM a lot of the cheaper ones do not have gorilla glass and will break easily.
Related
Hi all,
Has anyone experience with a problem when the touch screen intermittently works, especially when you press/hold hard on the sides of the face of the phone. Without pressing down on the side, the top menu (start... x) most of the time are either unresponsive or respond as if you press elsewhere on the screen.
I'm thinking of open up the phone later tonight to troubleshoot, guessing the screen digitizer is loose or, HOPEFULLY NOT, cold solder somewhere. But if you'd heard or faced this problem before or even have an idea on what has caused the problem, I'd like to hear from you. Please help!
Thanks!
Adding info
Oh yeah, did I forget to say that not just the top of the screen, the middle part as worst. The only part of the screen is still responsive is the bottom. If I press down or punctual around the face of the phone tightly enought(?), I'd be able to have the good touch screen for a little while (5... 10 minutes) before it gone weird again.
Fixed... for now
Well, I jammed a couple of thin plastic to the bottom of the screen within the housing facelet behind the t-mobile logo... and it works... for now.
I still intend to disassemble the dawn thing as soon as I realize such quick fix has become unpractical or no longer work.
I will check back to this post again, so if you are interested, don't hesitate to reply, I'll try anything when desperate.
How long have you had the phone?
How do you carry it around?
If you got the phone recently and started carrying it around by putting it in your pants pocket, then you find the screen sometimes doesn't work well, those facts are related. A couple of years ago people used to always complain about this, and some recommended rubbing your finger firmly around all edges of the screen for a temporary fix. Others recommended forcing a business card under the metal at the edges of the screen. I got a leather belt case for mine, and the problem went away.
If you've had the phone for years and it just now started acting up, the problem might be related to a cable, connection, or something. There is a wizard service manual online. I've used its instructions to replace a screen, with no bad issues.
Good luck with your phone. The wizard is a bit old, but still pretty nice.
Good Day folks, here is the long and short of it.
Galaxy s 2 fell and the screen broke
I bought a new screen
Replaced the screen BUT two big problems occured.
1. The screen appears to have less colours than my original screen
2. NONE OF THE SOFT KEYS WORK, HOME, MENU AND BACK DO NOT WORK.
Number 2. is the big problem. Does anyone have any idea how these buttons work?
Even when I press the buttons directly with my fingers with the buttons off they still do not work.
Im baffled. Please help.
I also have attached pictures of the button area
It happened to me, I removed the screen, I replaced from beginning and it worked...
Hi Collado, do the white things behind the buttons have any electronic functionality or are those just things to make it stick?
To all future readers. I found out what the problem was. Basically,
The home, back and menu keys are all connected to a single ribbon. It appears there is a tiny piece, connected via the back key. That was torn while i was ripping off the the screen and digitizer.
See the picture attached
How much did you pay for your replacement screen and where did you get it. My digitizer is broken due to a drop. My front glass is perfect but the digitizer is completey shot. How difficult was this project?
Hi Johnboy
I cant remember the price of the digitizer offhand but make a check on ebay.. that is where i got it.
Difficulty is high as you need the minature tool set to do this effectively and a gentle touch.
However, it still appears as though the screen I bought has less colours.
Sorry to jump in and unintended hijack
I also dropped my S2 and cracked the screen, and after checking around dropped it in to the Geek Squad at CPW. Who duly replaced the screen and digitizer for £80. Only problem is the screen seems less bright and if moved off the central viewing angle the screen dims, as if it wasa standard lcd and not the orginal AMOLED screen. Does anyone know if they make lesser screens or was it fitted badly.
Any advice greatly appreciated.
DM.
I would go back with it and complain.If you dont get satisfaction then do an impression of the guy that goes into the pizza shop in "rise of the foot-soldier" film.
Sent from my GT-I9100 using xda premium
Hi there,
my girlfriend smashed her Galaxy S3 sometimes. Now it's done, the glass is broken in the upper left corner. The screen worked fine. A few days later she dropped it and dropped it again... i think she needs some wooden sticks to make a bushfire to call her friends. After some drops the screen stopped working fine. The screen turns black and if i push the upper left side a bit, the screen apears... very purple. I watched some tutorials about replacing the glass'. So i opend the galaxy s3 checked the ribboncables and after reasembling the screen won't start anymore. The softkeys doesn't apears. The phone is booting and make sounds. That means, power is there but no power for the display. I only want to now if the display is okay or not, to buy a new glass. But now i have these power problem. Somebody know how i can fix it? Or do i need a new display with digitizer? It's not cheap... a glass is much ceaper .
Zebra1234 said:
Hi there,
my girlfriend smashed her Galaxy S3 sometimes. Now it's done, the glass is broken in the upper left corner. The screen worked fine. A few days later she dropped it and dropped it again... i think she needs some wooden sticks to make a bushfire to call her friends. After some drops the screen stopped working fine. The screen turns black and if i push the upper left side a bit, the screen apears... very purple. I watched some tutorials about replacing the glass'. So i opend the galaxy s3 checked the ribboncables and after reasembling the screen won't start anymore. The softkeys doesn't apears. The phone is booting and make sounds. That means, power is there but no power for the display. I only want to now if the display is okay or not, to buy a new glass. But now i have these power problem. Somebody know how i can fix it? Or do i need a new display with digitizer? It's not cheap... a glass is much ceaper .
Click to expand...
Click to collapse
Multiple posts on the subject including a you tube video on replacing .You need to search them and decide .
Accessories may have more information .
jje
Not sure how that happened...
Thanks in advance for looking.
Ordered a screen replacement for my wife's busted S3 screen. Got it, followed directions....got the area around the headphone jack a little too warm, but continued and finished removing the screen. Once I had the screen off, I thought it would be a good idea to power it up to make sure everything was working, especially the top left corner of the screen that was closest to the over heated spot.
To my skeptical surprise everything was cool. Took a picture, looked at some higher res pictures....just to make sure everything seemed normal, to which it did. Powered down, removed the battery and the SIM card and continued on.
I cleaned the screen with alcohol as the directions stated, put everything back together..and NOTHING. The thing is bricked. Any ideas how? I wasn't doing anything remotely related/close to the ROM. The only difficulty I had with any part of this (aside from the aforementioned over heating) was with the two ribbon buttons at the bottom, which got slightly tangled in the tape.
Before I attempt to 'unbrick' this does anyone have any other ideas? Battery is good, phone has been plugged/unplugged while attempting to power up....I didn't take anything else apart so I can't think of anything else that would have goofed up this phone.
If your LCD was broken a new bit of glass wouldn't fix it. It's almost impossible to change just the glass without damaging the digitizer. Most alcohol will destroy an LCD so cleaning it with that is a terrible idea. If you plug your phone into a computer see if it connects, that will at least tell you that the phone is still working, just broken display.
DrFredPhD said:
If your LCD was broken a new bit of glass wouldn't fix it. It's almost impossible to change just the glass without damaging the digitizer. Most alcohol will destroy an LCD so cleaning it with that is a terrible idea. If you plug your phone into a computer see if it connects, that will at least tell you that the phone is still working, just broken display.
Click to expand...
Click to collapse
Awesome. Per the instructions: "clean screen with Isopropyl alcohol to remove any excess glue"
Plugged in or otherwise, I get no LEDs, vibrations....nothing. Wondering if a jtag would even be worth it?
Hello, one of my Android phone (not present on xda) got its LCD damaged apparently. Strange cause i don't remember hearting it ever, and it's supposed to have last gorilla glass.. Anyways, there are like very tiny vertical invisible lines which makes text & everything looks pixelated.
This still let you use the phone, just can't read small text. But after ~20' with screen on (any use) one side + other parts of it while really get fuc*** up more & more. Turning screen off & then on just after will make issue go.. Until next ~20' use.
If i push a little hard on a specific place, then lines will comes and go, once again after on/off. Sometimes they'll stay for a while, listing "ghosting" (or maybe it's not that word?). Any ways to "repair" this without disassembly?
goja said:
Hello, one of my Android phone (not present on xda) got its LCD damaged apparently. Strange cause i don't remember hearting it ever, and it's supposed to have last gorilla glass.. Anyways, there are like very tiny vertical invisible lines which makes text & everything looks pixelated.
This still let you use the phone, just can't read small text. But after ~20' with screen on (any use) one side + other parts of it while really get fuc*** up more & more. Turning screen off & then on just after will make issue go.. Until next ~20' use.
If i push a little hard on a specific place, then lines will comes and go, once again after on/off. Sometimes they'll stay for a while, listing "ghosting" (or maybe it's not that word?). Any ways to "repair" this without disassembly?
Click to expand...
Click to collapse
Not likely without dis-assembly.
Nothing to be done about that without replacing the LCD. Gorilla glass has nothing to do with the LCD, for future reference. The Gorilla glass is only for the top glass.
I know that of course.. What i meant is : how could the LCD be damaged this way if 1/ i'm cautious 2/ it has gorilla glass.
Could this be a bad LCD that started dying only after days of being ON? I'm planning on getting same phone but i'm worried..
goja said:
I know that of course.. What i meant is : how could the LCD be damaged this way if 1/ i'm cautious 2/ it has gorilla glass.
Could this be a bad LCD that started dying only after days of being ON? I'm planning on getting same phone but i'm worried..
Click to expand...
Click to collapse
Just depends on the phone. Nowadays many of the phones are so focused on being slim with tiny bezels that it doesn't take much to break the LCD. I've known people that broke their phone just from being in the front pocket. Never dropped or hit anything, etc. I own a little repair shop and have seen it more than once and have read about others online with similar issues. And sometimes parts just go bad. Just like any other tech based thing.
I see.. Ayways, as said i can still use it, things will just get bad after a moment, i'll just turn off/on and all's gone.
Will it goes on like this forever? I mean, unless accident happens, it won't get worse? Better either i guess..?
The touchscreen on my Verizon G3 started acting up recently. In the lower portion of the screen there's a space where it doesn't register my touches well (take a look at pics the space in between the lines don't really 'register' my touches. You can see in the second pic I'm currently touching the part where its not really working and it looks like I'm touching the screen with two fingers even though I'm only using one). When I type sometimes two letters are pressed at the same time or its like I didn't touch the screen at all which makes typing difficult and takes a lot of time. The whole screen sometimes doesn't hold a touch, like I tap and hold but it only 'holds' like I only tapped the screen. Other times when I'm sliding my finger across the screen, it starts jumping around. Now the top row of the keyboard/screen doesn't even register touches anymore so can't really do much now. I've reset the phone and didn't fix anything. Is this something LG would fix if I sent the phone in? If so how long is turnaround and will I have to reset it back to stock/unroot it?
if you have any type of glass screen protector on, take it off and verify the issue.
some tg screen protectors are junk, and have caused issues like this.
bweN diorD said:
if you have any type of glass screen protector on, take it off and verify the issue.
some tg screen protectors are junk, and have caused issues like this.
Click to expand...
Click to collapse
I had a $5 glass screen protector on it from ebay and thought that was the problem but when I took it off the problems ensued
Some g3s do have or develop touchscreen issues. Check under the back cover that there is nothing putting pressure on the display from behind, like a swelling battery.
It is probably a warranty issue, though.
Sent from my VS985 4G using Tapatalk