Related
Trying to follow lakehousetech's guide Viewpad 7 Backup, Root & Recovery guide, and Super One Click 1.7 basically refuses to work, always hangs on "Waiting on device", using two good known cables and two good known USB ports (front and back).
Found out about the Gingerbreak 1.2 apk, managed to jailbreak and get Super User installed.
So as I move onto the Stock Backup step in the guide, I need to run ADB Shell. So I open up cmd.exe and navigate to the C:\android-sdk-windows\platform-tools folder and launch "ADB Shell", it starts the server, but ultimately gives me a "Error: device not found".
Are there drivers I need to install?
Do I need this busybox app installed?
Seemed to need them in rooting my HTC Doubleshot (MyTouch4gSlide). What am I doing wrong here?
elister said:
Trying to follow lakehousetech's guide Viewpad 7 Backup, Root & Recovery guide, and Super One Click 1.7 basically refuses to work, always hangs on "Waiting on device", using two good known cables and two good known USB ports (front and back).
Found out about the Gingerbreak 1.2 apk, managed to jailbreak and get Super User installed.
So as I move onto the Stock Backup step in the guide, I need to run ADB Shell. So I open up cmd.exe and navigate to the C:\android-sdk-windows\platform-tools folder and launch "ADB Shell", it starts the server, but ultimately gives me a "Error: device not found".
Are there drivers I need to install?
Do I need this busybox app installed?
Seemed to need them in rooting my HTC Doubleshot (MyTouch4gSlide). What am I doing wrong here?
Click to expand...
Click to collapse
you need to run adb shell from the drive letter youre pc gives when youre viewpad is logged in mine is g:\ thats the virtual cdrom drive from youre viewpad.
open cmd
cd g:\
adb shell
check if the drive letter is correct with youre system then it`s ok and youre gonne be fine
you need to run the setup too when youre plug youre device on youre pc youre getting a sync program but it also installs de driver just leave the program running in the background dont do anything just let it minimazed hope you get it to work
Alleycatzero said:
you need to run adb shell from the drive letter youre pc gives when youre viewpad is logged in mine is g:\ thats the virtual cdrom drive from youre viewpad.
open cmd
cd g:\
adb shell
check if the drive letter is correct with youre system then it`s ok and youre gonne be fine
you need to run the setup too when youre plug youre device on youre pc youre getting a sync program but it also installs de driver just leave the program running in the background dont do anything just let it minimazed hope you get it to work
Click to expand...
Click to collapse
Ok, i'll copy the ADB.exe file to the H:\ drive on the phone, then use the Windows command line interface to manually navigate to that drive and launch ADB from that folder. Is there anything else I should copy to that folder, other than the image and clockwork file?
There is no virtual CD rom drive letter asigned, just a flash drive letter. Also, what is the setup? There is no setup.exe on the phone drive letter to launch.
PS
Thanks for the advice.
Didnt work.
01/31/2012 03:56 PM <DIR> Music
02/01/2012 09:34 AM <DIR> Photos
01/31/2012 03:56 PM <DIR> Video
01/31/2012 03:56 PM 1,935,275 ViewPad7e_QSG_Rev.1a_08-17-11.pdf
01/31/2012 03:56 PM 6,668,084 ViewPad_7e_UG_ENG_FRN_ESP.PDF
09/30/2011 12:02 PM <DIR> LOST.DIR
09/30/2011 12:02 PM <DIR> .android_secure
09/30/2011 04:03 PM <DIR> Android
01/31/2012 07:59 PM 89,636,244 CleanViewpad7_signed_v1.0.zip
02/01/2012 09:34 AM <DIR> DCIM
10/03/2009 05:07 PM 26,172 flash_image
02/09/2011 01:27 PM 4,591,616 cwrecovery.img
11/18/2011 10:00 PM 79,358 rom manager v1.8.3.6.apk
08/04/2011 07:46 PM 410,942 adb.exe
08/04/2011 07:46 PM 96,256 AdbWinApi.dll
08/04/2011 07:46 PM 60,928 AdbWinUsbApi.dll
09/05/2011 02:09 AM 5,394,432 clockworkmod.4.0.0.9.img
06/21/2011 08:04 AM 183,651 fastboot.exe
09/05/2011 03:38 AM 3,317 Instructions.txt
08/17/2011 12:22 AM 258,294 libcurl-4.dll
08/17/2011 12:22 AM 27,867 libjson-0.dll
08/17/2011 12:22 AM 56,832 mgwz.dll
08/17/2011 12:22 AM 348,160 msvcr71.dll
08/17/2011 12:28 AM 1,231,360 revolutionary.exe
17 File(s) 111,008,788 bytes
7 Dir(s) 2,472,206,336 bytes free
H:\>adb shell
error: device not found
Again, this is not a CD-Rom drive letter, its just some 2.472 gb partition. My Viewpad does not create a CD-Rom drive or image when I connect it to my PC (Windows7 64bit). In device manager, I can clearly see two "VS Viewpad 7e USB Device" listings, but only one of them generates a drive letter. I can see another drive partition in Disk Management, but cannot mount it like I can do other SATA drives.
mine is a auto run setup when i connect the pad also in the drive mine creats there is a adb exe i dont have to copy it dont mount the viewpad for file transfer what youre showing me is the sd card it suppose to show a virtue drive when you plug in the device without mountin it on youre pad
But what kind of do you got the viewpad 7 or viewpad 7e for 7e there is no rom no cwm
Alleycatzero said:
mine is a auto run setup when i connect the pad also in the drive mine creats there is a adb exe i dont have to copy it dont mount the viewpad for file transfer what youre showing me is the sd card it suppose to show a virtue drive when you plug in the device without mountin it on youre pad
But what kind of do you got the viewpad 7 or viewpad 7e for 7e there is no rom no cwm
Click to expand...
Click to collapse
So brand new, out of the box, you plug your viewpad into your PC and presto, creates a virtual cd drive and ADB is pre-loaded ready to run shell?
I have the Viewpad 7e, running Android 2.3.1, Kernel version 2.6.35.7-svn ([email protected] #58).
I suppose emailing Viewsonic in regards to getting Google Marketplace installed is pointless, so I might just have to return this product. The fact that I cannot boot into recovery mode tells me this device is defective.
elister said:
I have the Viewpad 7e, running Android 2.3.1, Kernel version 2.6.35.7-svn ([email protected] #58).
I suppose emailing Viewsonic in regards to getting Google Marketplace installed is pointless, so I might just have to return this product. The fact that I cannot boot into recovery mode tells me this device is defective.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1321615
Alleycatzero said:
http://forum.xda-developers.com/showthread.php?t=1321615
Click to expand...
Click to collapse
Thanks, it appears that clockwork recovery mod simply doesnt work on the Viewpad, but marketplace, while I need to jump through some serious flaming hoops, can be installed.
Alleycatzero said:
http://forum.xda-developers.com/showthread.php?t=1321615
Click to expand...
Click to collapse
Yup, worked like a charm. Marketplace is installed and working properly, now I can work on removing some un-needed apps. Thanks so much!
Ok, ive managed to get Marketplace installed, but its like every 4th app wont install and its not because of file space.
I flat out need to install clockwork recovery mod, but cant due to adb shell never finding my device.
Yes I have my device rooted (using gingerbreak 1.20 as super one click never worked)
Yes I have USB Debuging mode enabled.
Yes I have Super user permissions working.
Yes I have the latest android sdk installed, which comes with adb
Yes I have a known working USB cable (dont have any problems transfering files)
Yes device manager does detect my tablet, Android Composite ADB Interface.
Using Windows 7 and the Viewpad 7e tablet.
Sure I dont need to install special drivers for this? Every time I google "Adb shell error device not found", I get a dozen solutions saying to download specific device drivers.
"error: device not found" & "mount failed" in Amazon Kindle Fire
hello,
I'm tired to load android market in my kindle fire. i search for the solution in google. i followed all the steps
i added the line 0×1949 in the file ".android\adb_usb.ini"
i added the following lines in "SDKManager\extras\google\usb_driver\android_winusb.inf"
;Kindle Fire
%SingleAdbInterface% = USB_Install, USB\VID_1949&PID_0006
%CompositeAdbInterface% = USB_Install, USB\VID_1949&PID_0006&MI_01
i can able to connect my device to pc via usb cable and im able to see the explorer files of device in PC.
i have installed the google services framework in my tablet. and its running fine.
problem 1:
i installed file expert in my kindle fire tablet and when im trying mount read/write permisson it is failing.
problem 2:
when im running the "adb devices" in at the location of "platform-tools" my tablet device is not listing under the devices.
please please please give me a solution for it.
Based off the work of thecubed over in the Nook Color forums, I've created the equivalent ADB Driver installer for the Sony Tablets including the new Xperia Tablet S.
thecubed's original thread for the Nook Color: http://forum.xda-developers.com/showthread.php?t=910008
The installer is fully automated and negates the need to install the Android SDK or edit any files.
It has been tested under Windows 7 x32 and x64 and should also work for Vista and XP.
========================================
As of 2012 November, Windows 8 requires you to disable driver signing and MANUALLY install the drivers.
Method A:
Open an ADMINISTRATOR Command Prompt:
To disable driver signing, copy/paste the following commands:
bcdedit -set loadoptions DISABLE_INTEGRITY_CHECKS
bcdedit -set TESTSIGNING ON
[RESTART]
(on your desktop you'll see the watermark: "Test mode'" until you re-enable driver signing).
Re-enable driver signing:
bcdedit -set loadoptions ENABLE_INTEGRITY_CHECKS
bcdedit -set TESTSIGNING OFF
[RESTART]
Method B:
From the Metro Start Screen, open Settings,
Click "Change PC Settings".
Click "General".
Scroll down, and click "Restart now" under "Advanced startup".
Click "Troubleshoot".
Click "Advanced Options".
Click "Startup Settings".
Click [Restart].
Choose "Disable driver signature enforcement" (Usually #7)
Install device drivers either through the automated tool or manually.
========================================
(If you're running Windows XP, you may also need to manually install the MTP [media transfer protocol] drivers located here: http://android.mrboot.de/index.php?/archives/6-Sony-Tablet-S-MTP-driver-for-3G-version.html Thanks to cbuckmiller]
It should be quick and painless for 95% of users but if the your tablet still shows up as an unknown device, I've also included step-by-step instructions to manually install the drivers (README.txt).
ADB is also bundled in the ZIP file so you can run "adb devices" as well as any other commands.
DOWNLOAD: http://d-h.st/tyd (7.27 MB)
ADB is required to run djrbliss' Sony root exploit: http://forum.xda-developers.com/showthread.php?t=1487020
Windows 8 ADB installation:
Thanks this is probably the most helpful/potentially frustrating step for those wanting to root! I had to work it all out manually last night...
Thanks so much for this!
It really helped me to root, itsaved me alot of time messing around to get ABD to work and your installer worked first time! Top class! Thanks mate.
Nice work m8 and the video was the cherry on top. Could it be any easier?
Keep it up.
You're such a legend. I was having so any problems with ADB, saw your video and its done in minutes
Sent from my GT-I9100
Perfect thank you very much
had a bit of a strugle, but after deleting old drivers reboot and than this script now all is fine, works like a charm thanks
a BIG thank U
Nice work, thanks for all your efforts
Hi, I had to revert back to xp 32bit from w7(dont ask why), problem is Im having problems getting adb sorted. I plug my tablet in and I get a triple ping(!!) instead of the usual 2. Anyways, in device manage it comes up with an explaination mark. Ok i install the automated drivers and xp still does not install them. I make the wizard find the drivers but it reports that drivers not installed.
I feel like a right noob, window 7 was so easy.
H E L P !
Regards,
D.
PS.
(If you're running Windows XP, you may also need to manually install the MTP [media transfer protocol] drivers located here: http://android.mrboot.de/index.php?/...G-version.html Thanks to cbuckmiller]
Looked at above and it just gives aload of writing.
Confirming this also works for ICS updated devices.
I keep getting "error: device not found" when starting ADB (debugging is enabled). Using Android SDK adb is ok.
Also, why does the .ini have " " instead of normal spaces? I don't know if it causes problems, but I took them out when manually installing. After that, there was only the composite device listed, which I installed.
Hi.
How do I get STP installed with Win XP.
When I go to the STP download here:
http://android.mrboot.de/index.php?/archives/6-Sony-Tablet-S-MTP-driver-for-3G-version.html
I get a load of writing and no file downloaded.
Also, I haven't got a 3G version only wifi.
Cheers.
---------- Post added at 03:51 PM ---------- Previous post was at 02:52 PM ----------
Ok I have tried saving the info in a word doc and renaming to WpdMtp.inf then pointing the setup to this file but it doesn't do anything.
Please help.
Hi.
I have managed to get MTP installed but the ADB installer does not want to play ball in windows xp. When click "have disk" and ok windows says "The specified location does not contain information about your hardware."
Anyone help me out?
---------- Post added at 05:15 PM ---------- Previous post was at 05:04 PM ----------
Right I'm going to sack this off because I will end up bricking the devices if I carry on messing about with it.
I've installed the Automated ADB Driver Installer onto my PC. I want to remove the software. How do I go about doing that?
I guess I will just put the S1 into a draw until the official ICS is released.
Thanks.
Hello me again.
I think I know what I did wrong. I'm going to watch a few more videos on how to install adb then I will try it again. I really want ICS badly and I will do what it takes to get it.
Wish me luck.
Warren_Orange said:
Hi.
I have managed to get MTP installed but the ADB installer does not want to play ball in windows xp. When click "have disk" and ok windows says "The specified location does not contain information about your hardware."
Anyone help me out?
---------- Post added at 05:15 PM ---------- Previous post was at 05:04 PM ----------
Right I'm going to sack this off because I will end up bricking the devices if I carry on messing about with it.
I've installed the Automated ADB Driver Installer onto my PC. I want to remove the software. How do I go about doing that?
I guess I will just put the S1 into a draw until the official ICS is released.
Thanks.
Click to expand...
Click to collapse
I believe you have the same problem I had.
read this:
http://forum.xda-developers.com/showpost.php?p=27324030&postcount=16
Warren_Orange said:
Hi.
I have managed to get MTP installed but the ADB installer does not want to play ball in windows xp. When click "have disk" and ok windows says "The specified location does not contain information about your hardware."
Anyone help me out?
---------- Post added at 05:15 PM ---------- Previous post was at 05:04 PM ----------
Right I'm going to sack this off because I will end up bricking the devices if I carry on messing about with it.
I've installed the Automated ADB Driver Installer onto my PC. I want to remove the software. How do I go about doing that?
I guess I will just put the S1 into a draw until the official ICS is released.
Thanks.
Click to expand...
Click to collapse
How to install an INF file: http://www.rm.com/Support/TechnicalArticle.asp?cref=TEC14642
The file needs to be saved as an INF. You can do that directly from your browser by saving the file.
Then right-clicking on it and going to install.
Can I root my xperia tab whit these 2 things?
Sent from my SGPT12 using XDA Premium HD app
Hey,
i installed these drivers and in my device Manager it shows "Android Composite ADB Interface" so it should work. But when I try to run adb devices it just tells me "List of devices attached" but there is no. A few months ago ADB worked and I was able to do a backup with ADB. USB-Debugging is enabled. Does anybody know what could be wrong?!
boborulz said:
Can I root my xperia tab whit these 2 things?
Click to expand...
Click to collapse
Yes... as stated in the first post.
djlars said:
Hey,
i installed these drivers and in my device Manager it shows "Android Composite ADB Interface" so it should work. But when I try to run adb devices it just tells me "List of devices attached" but there is no. A few months ago ADB worked and I was able to do a backup with ADB. USB-Debugging is enabled. Does anybody know what could be wrong?!
Click to expand...
Click to collapse
Uninstall the device and check the "Delete existing files/drivers."
Restart, and try the installation again.
If there was an existing ADB driver from another Android device, it may not install correctly since it can't append to the existing Android ADB support INF.
does not work with windows 8
Ive followed a guide to setting up the adb shortcut on my desktop, however something isn't right. Does anyone have a guide to get me started? I want to learn adb commands before I s-off incase I ever need to s-on for an exchange.
If anyone is interested in helping, I can link the guide I followed, and explain the steps I took.
I'm starting to get frustrated now..
I've been watching YouTube videos, and still nothing.
I've downloaded Android SDK for windows, extracted the zip to my Desktop and renamed the file to AndroidSDK. Than placed the file in the root of my C:, than right-clicked on my computer from the start menu > properties > advanced > environment variable, and added ;C:\AndroidSDK\tools, Ok > Ok > Ok.
Go to start > run > cmd. Command prompt comes up with a line that reads C:\Documents and Settings\Mark>. I type adb and it spits this out..
'adb' is not recognized as an internal or external command, operable program or batch file
Does anyone know what is going on here? I'm on Windows XP
You should probably use the Android SDK with the installer..
---------- Post added at 03:00 PM ---------- Previous post was at 02:57 PM ----------
Once you install it run SDK Manager as administrator (right click "run as administrator") boxes open, check the box "Android SDK Platform-tools", Android 4.0.3 (if you want) and Google USB Driver package.
thank you, I will give that a shot.
I went back, and uninstalled everything, and deleted the AndroidSDK file from the root of C: so that I could start fresh with the android SDK installer. If that does not work, I will give the run as admin way a shot.
wait for all then then go to start (orb whatever) right click on computer select properties then advanced system settings, environment variables. Under system variables click path then hit the edit button, add this to the end:
;C:\Program Files (x86)\Android\android-sdk\platform-tools
reboot
---------- Post added at 03:07 PM ---------- Previous post was at 03:04 PM ----------
In my experience after installing the basic android sdk when I went to download the rest of the tools (platform-tools) the sdk would cry that it couldn't install. Running it as admin (yes I'm already an admin on my machine) solved that problem. Good luck and may the force be with you..
---------- Post added at 03:08 PM ---------- Previous post was at 03:07 PM ----------
Also the key to adb is really the environment path.. so your system know were to find it.
Of course I'm assuming your using a version of windows.
Yes, I am running windows xp from a Dell laptop.
I just went through the Android SDK installation process and still have the same output when I go to put in an adb command.
I am the computer admin, as I do not have any other account on this computer.
th3rapist said:
Yes, I am running windows xp from a Dell laptop.
I just went through the Android SDK installation process and still have the same output when I go to put in an adb command.
I am the computer admin, as I do not have any other account on this computer.
Click to expand...
Click to collapse
Did you add the path?
---------- Post added at 03:17 PM ---------- Previous post was at 03:16 PM ----------
Yours would probably be:
;C:\Program Files\Android\android-sdk\platform-tools
I think I may have been missing some things. After the installer finished, I was trying to use adb right from there. I did not install any platform tools or anything.
So if I'm going to be using ADB for GB 2.3.4 (what the Rez came with) and 4.0 (the leaks for the Rez) do I need to download both, with will 4.0 cover all android versions below it?
zone23 said:
Did you add the path?
---------- Post added at 03:17 PM ---------- Previous post was at 03:16 PM ----------
Yours would probably be:
;C:\Program Files\Android\android-sdk\platform-tools
Click to expand...
Click to collapse
the installer would not have added the path for me?
Yes the Android SDK does not install platform tools that why I said to run SDK Manager and check the boxes to install it. Then add the install location to your windows path. It wont work otherwise.
---------- Post added at 03:26 PM ---------- Previous post was at 03:25 PM ----------
th3rapist said:
the installer would not have added the path for me?
Click to expand...
Click to collapse
No it wont add the path it assumes your going to run adb directly from the platform-tools folder.
I understand now. The tools are all downloading now, and I entered the path. I'm on a rather slow internet connection right now, so I will report back after everything is done, and I reboot.
One last question.
Do I need to install the Android 2.3.3 and Android 4.0 x packages?
th3rapist said:
One last question.
Do I need to install the Android 2.3.3 and Android 4.0 x packages?
Click to expand...
Click to collapse
Nope only if you want to make apps for android.
Sweet.
ADB is working now. Thanks for your help!
Your welcome glad I could help.
Sent from my ADR6425LVW using xda premium
I just had a similar experience with installing adb on my computer last week. Couldn't get the computer to recognize fastboot commands. Someone told me to change the directory in cmd prompt using "cd c:\" Etc etc, and redirect the directory to the folder where your adb files are, then it worked like a charm. Hope this helps.
Nick
slosrtnick said:
I just had a similar experience with installing adb on my computer last week. Couldn't get the computer to recognize fastboot commands. Someone told me to change the directory in cmd prompt using "cd c:\" Etc etc, and redirect the directory to the folder where your adb files are, then it worked like a charm. Hope this helps.
Nick
Click to expand...
Click to collapse
This is generally not necessary if you set the environment variable.
The following link may be helpful:
http://forum.xda-developers.com/showthread.php?t=872128
Sent from my ADR6425LVW using Tapatalk 2
WookieFan said:
This is generally not necessary if you set the environment variable.
The following link may be helpful:
http://forum.xda-developers.com/showthread.php?t=872128
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
Even after setting the environment variable, I still needed to change the directory. Maybe I chose the wrong folder for the environment variable? Oh well, it works for me now. Just sharing my experience with adb.
Nick
Hi,
I updated my Lumia 800 to WP7.8 using Nokia Caresuite. Now I tried to unlock it with the phone registration tool coming with WP8 SDK. I am using Windows 8. The problem is, that the phone cannot be connected. Further in Zune I can't see how much space I'm using on my phone. Is there a new Zune for WP7.8?
Greets
update:
Windows 7 and WP 7.1 SDK worked.
fretb said:
Hi,
I updated my Lumia 800 to WP7.8 using Nokia Caresuite. Now I tried to unlock it with the phone registration tool coming with WP8 SDK. I am using Windows 8. The problem is, that the phone cannot be connected. Further in Zune I can't see how much space I'm using on my phone. Is there a new Zune for WP7.8?
Greets
update:
Windows 7 and WP 7.1 SDK worked.
Click to expand...
Click to collapse
No, just go ahead to control panel and uninstall everything whose manufacturer is Nokia (no need to uninstall ncs, and, of course, don't touch zune), and, of course, reboot. I had the same problem and it helped me and couple of other people.
I had a similar problem on my bro's Win 8 PC (as I am an osx user). We couldn't deploy the xaps so we just uninstalled zune and downloaded it from microsoft's site again and it worked fine after that.
I managed to unlock my phone and deploy the apps through the WP7 SDK. Did it on Windows 7, though. Worked like a charm.
bsk_76ers said:
I managed to unlock my phone and deploy the apps through the WP7 SDK. Did it on Windows 7, though. Worked like a charm.
Click to expand...
Click to collapse
mind to pm me how to do it?
I had the same problems, I had to uninstall the drivers after use of the update software. For some reasons the drivers of the updating software did not seem the same as the Zune standard drivers. *using 64xWindows8
After uninstalling everything, worked fine again
yken11 said:
mind to pm me how to do it?
Click to expand...
Click to collapse
... or just post here ... please :good:
Peace
chris5s said:
... or just post here ... please :good:
Peace
Click to expand...
Click to collapse
I hade the same problem and i've just reinstalled zune
it worked
All you need to do is uninstall the WinUSB drivers so the Zune drivers will be used again.
hey guys. i'm here because i too have a lumia 800 wp7.8 and it has been unlocked using the windows phone developer registration app.
the problem is, i can't deploy any application onto my phone. i've tried countless of .xap files to deploy (using Application Deployment) but the status keeps saying:
"XAP file is invalid".
My phone is registered. it connects to the zune software (which i have uninstalled and installed according to the posts above).
I tried it with Tom XAP Installer and it said "Make sure device is unlock" and "make sure it is connected to zune & pc".
I also tried it with MultiXap installer and it said "nullable object must have value".
Please help me!
Is there any way around this? greatly appreciate your help.
teochinchi said:
hey guys. i'm here because i too have a lumia 800 wp7.8 and it has been unlocked using the windows phone developer registration app.
the problem is, i can't deploy any application onto my phone. i've tried countless of .xap files to deploy (using Application Deployment) but the status keeps saying:
"XAP file is invalid".
My phone is registered. it connects to the zune software (which i have uninstalled and installed according to the posts above).
I tried it with Tom XAP Installer and it said "Make sure device is unlock" and "make sure it is connected to zune & pc".
I also tried it with MultiXap installer and it said "nullable object must have value".
Please help me!
Is there any way around this? greatly appreciate your help.
Click to expand...
Click to collapse
What kind of XAP's are you deploying? Pirated apps, your own, or copies from the Marketplace?
Do you have any error codes? Are you using WP7 or WP8 sdk, which OS?
kanttii said:
What kind of XAP's are you deploying? Pirated apps, your own, or copies from the Marketplace?
Do you have any error codes? Are you using WP7 or WP8 sdk, which OS?
Click to expand...
Click to collapse
My XAP files are downloaded from the Marketplace. I chose "Download and install manually" and that's how I got them.
No error codes. When I click on "Deploy", the App Deployment program just wrote "Status: XAP file is invalid".
I'm using the WP7.1 SDK with the SDK WP7,8 update.
My laptop is running Windows 7. My phone WP7.8.
Thanks for the quick reply
Hope I provided enough information!
teochinchi said:
My XAP files are downloaded from the Marketplace. I chose "Download and install manually" and that's how I got them.
No error codes. When I click on "Deploy", the App Deployment program just wrote "Status: XAP file is invalid".
I'm using the WP7.1 SDK with the SDK WP7,8 update.
My laptop is running Windows 7. My phone WP7.8.
Thanks for the quick reply
Hope I provided enough information!
Click to expand...
Click to collapse
No, you cannot install xaps from marketplace this way, why would you need that? All this apps can be installed via marketplace on the phone. The point of developer unlock is to install homebrew apps and those that cannot be submitted to the marketplace.
Lanex777 said:
No, you cannot install xaps from marketplace this way, why would you need that? All this apps can be installed via marketplace on the phone. The point of developer unlock is to install homebrew apps and those that cannot be submitted to the marketplace.
Click to expand...
Click to collapse
ohhhh!
sorry, i'm new to all of this.
thanks so much for your help!
How did you Unlock your Lumia 800?
bsk_76ers said:
I managed to unlock my phone and deploy the apps through the WP7 SDK. Did it on Windows 7, though. Worked like a charm.
Click to expand...
Click to collapse
How did you unlock your Lumia 800 ? I cant unlock it ...
i dont even know if it is unlocked or nlocked
Hi, I need to download a mobile app (x86 compatible) to be sideloaded on W10 pc.
The app is released for mobile only so I cannot install it from microsoft store, but I need it and I want to try to sideload it on pc.
The question is:
how to download appx bundle of mobile only apps?
will it work on pc?
Thanks!
You can download appx via this site: https://store.rg-adguard.net/
how i know you can`t install mobile appx on pc.
My reply
Gone are the days when Windows Store users were allowed to download XAP or APPX files manually for offline installations. With the introduction of Microsoft Store, Microsoft discontinued the option. Now, users are only allowed to install applications from the Store itself. This does not mean that you cannot install APPX files on your Windows 10 machine. But the main thing is getting an APPX file. For this, you can use a tool called Fiddler.
If you want to work with the source code of the program for a mobile phone, you can ask the developers or try to open it through the program.
It seems to me if you search you can find some kind of emulator that will display on the computer, but this is not accurate
EdbMails Office 365 migration tool is one of the most effective ways to migrate Office 365 tenants. I've used this software before, and it can easily move a huge number of mailboxes. I was able to contact their excellent 24/7 personal support at one point, and they were able to walk me through the procedure and requirements. If you're having trouble migrating to Office 365, I highly recommend EdbMails Office 365 migration tool.
i got this message after successfully download it once.then i want to redownload the apps
hooooossamq said:
i got this message after successfully download it once.then i want to redownload the apps
Click to expand...
Click to collapse
Your IP or your compunter name or browser ID has been blocked or whatever they use to identify your computer has been blocked by microsoft server. It's also maybe limited to the number of time you can download a specific package that way.
I try to understand the way they decide to allow or forbid to download a package. I succeded to download 2 paid packaged app, one of them running just fine once unzipped (but could not install it as a UWP package because lack of certificate), the second one, still unzipped, missing shared dll to start, so downloaded successfully VCLibs.140 package but it refuse to install because to other insalled package has to be stopped first before that.
As the pace of the world picked up, professional workers began working remotely on a daily basis. This is because multiple companies have adopted new guidelines for working remotely with Microsoft Teams, making it important for companies to ensure their virtual teams have access to tools and technology to work on the go. I'm here. Because Microsoft 365 is completely cloud-based, users can work effectively anywhere, anytime, as long as they have an internet connection. Which makes many users and enterprises to adopt Office 365 Migration Services.
RonPeters said:
My reply
Gone are the days when Windows Store users were allowed to download XAP or APPX files manually for offline installations. With the introduction of Microsoft Store, Microsoft discontinued the option. Now, users are only allowed to install applications from the Store itself. This does not mean that you cannot install APPX files on your Windows 10 machine. But the main thing is getting an APPX file. For this, you can use a tool called Fiddler.
Click to expand...
Click to collapse
How would I do this could you give me a guide