Help needed with Universal Naked Driver - Asus Eee Pad Transformer Prime

Hi Folks,
I've been trying to follow the tutorial "Guide/tutorial] Asus Transformer Prime/TF201 stock to Android 7.1 Nougat" which go well to the point I have to connect the tab In APX mode(step 4).
Installing the USB_APX driver from explorer( right mouse button & install) does not work, it gives an error me “The inf file you selected does not support this method of installation”.
Connecting the tab in APX mode (volume+&power) gives an unknown device in device manager. Updating the driver of this unknown device with android_apxusb.inf gives me an error: "the given folder does not contain a compatible driver for your device, check if the driver matches windows 32-bit computers etc. This with a windows 7-32bit pc, win10-64 gave similar results.
Should I manually update the driver to some other device found in the list of other drivers found on my pc? Sadly there is no asus or anything.
Thanks in advance

Got the thing going with downloading google android drivers

Related

[Q] NVFlash drivers don't let me use SDK ADB Google USB Drivers.. Help!!

I have a Gtablet in which I was able to install and use NVFlash. I used the recommended driver for this process and it works perfectly. Now here is my new problem / challenge. I am trying to learn SDK ADB. As parts of the procedures, I have to install the Google USB driver to have the device recognized as an android device (Or something in that line as per the instructions). Here are the problems:
1.) My Gtab show on the device manager as a storage device and a portable device with the same drive letter as the storage device
2.) I'vr tried removing the NVflash USB driver, but it does not uninstall. Every time I re-connect the device it re-install the driver and goes back to problem 1.)
3.) I used (USBdeview) to try and remove the device and the driver from my win 7 x64 but it just don't uninstall or stop the decive or anything.
4.) I tried updating the driver of the gtab (As in problem 1.)) and it says that the current driver is the most appropriate for the device. And goes back to problem 1.)
In other words..... I am tied up with the NVFlash driver (Tegra I beleive, which is the one described on the NVFlash How to). I am trying to SDK ADB, but it will not allow me to connect cause the Gtab is not recognized as an Android device, but as a storage device or nvidia tegra when in APX mode (I beleive it called).
which step am I missing or doing wrong?
Thanks in advance
Please excuse my lack of technical lingo.....
Did you read the sticky message: adb for your gtab (windows) in the general section?
I had the same problem, except I'm using windows XP. The storage device is not the driver to uninstall. Device manager never showed me any other drivers relating to the gTab.
Using USBDeview I was able to see a different driver (can remember was it was called exactly), uninstalled then reinstalled using the usb driver I downloaded from google and everything was fine.

USB driver for Cube K8GT

hi,
i wanted to start android development on a real, but not too expensive device.
So i bought this one: http://www.amazon.de/WiPad-Multitou...=sr_1_2?s=ce-de&ie=UTF8&qid=1337256098&sr=1-2
The manufactorer is CUBE: http://www.cube-tablet.com/cube-k8g...8-1-2ghz-camera-8gb-capacitive-tablet-pc.html
It works fine and i wanted to connect it to my PC, running windows 7.
The problem is: I could not find any usb driver on the (chinese) manufactorer site.
In the device manager the device was listed as "K8GT_W" and marked with "no driver installed".
Can someone please tell me, if there is a driver for this device or how to use some "generic" usb device driver with this device?
I downloaded the google USB driver with the android SDK manager.
The i selected "update driver" from the device maanger + selected the google usb driver download directory.
This shows the message "K8GT_W could not be installed".
The manufacturers is CUBE:http://www.vaful.com/cube-k8gt-delu...roid-40-capacitive-touch-screen-p-100130.html
I also encountered the same problem!
me 2
did you solve the problem? and found any thing?
Im looking for a usb driver for a visture v97 hd, also a china tablet with the exact same issue you guys are having. anyone have a generic driver for us so we can charge our tablets via usb ?

[Q] Driver for Archos G80 G9

I have installed SDK to my PC running Windows XP. I connect my Archos G80
G9 to . it shows found new hardware MTP and asks to install the driver.
I choose option
"install from a list of specific location" then
"search for the best driver in these locations"
"include this location in the search"
then browse to folder of the driver which I download from the Archos Website
(adb_winusb driver\usb_driver) then click "Next" to install the driver but the
PC shows "the hardware was not installed because the wizzard cannot find the necessary software".
I even tried the driver downloaded from the SDK tool but it's the same error.
So my PC does not shows the Archos.
In Device Manager it shows : Android phone
Android composite ADB interface
(this device is working OK)
but there is yellow question mark in MTP ( need install driver ).
It's very strange because if I goes to the command mode and type
"adb device " it shows my device ID.
So my question "How I install the driver so my PC will show my Archos?"
Thanks
Try searching in Windows Update (in New Hardware Wizard or in Update Driver wizard)

[Q] Huawei U8650 problem install drivers. help me please

hello.
i have very problems to install usb drivers for my phone huawei U8650.
i try everything i find in internet to install but, every try, dont work.
when i connect my phote to my pc(windows 7 32bits), appear Unknown Device.
then i chose :update driver software,
then Browse my computer for driver software
then Let me pick from a list of device driver on my computer
then Open folder with drivers that i downloaded and Select file "android_usb.inf" and click "Open".
here appear one error: "the specified folder does not contain a compatible software driver for your device. if the folder contains a driver, make sure it is designed to work with Windows for 32-bit systems.". all the drivers i try to install give me these error.
help me, i try another solutions but the pc give error: best driver already installed.
anyone.
ps i try in a pc with a windows xp, but the results are the same...
Hello,
Have you tried official ones from Huawei?
I can't post any link, so you google for "HUAWEI Android Phones USB Driver" and look for the huawei website (it was the 2nd google result for me), the properties are v1[1].0 | 2011-06-29 | 7.76MB
I have a U8860 and in windows 8 it worked very well. Connect your phone (maybe you need to enable the usb debugging mode on the developer settings of your phone) and just run the installation and execute the thing that will give you the option for drivers installation. There is no need to do any manual .inf selection to install.
Hope it helps
Thanks to try help.
i did what you said, first i unninstall the drivers, then i install drivers from huawei website. but still the same. When i connect the usb in computer, only starts charging the phone. nothing more happens.

[Q] Connecting android tablet as testing device

Hello everybody!
I have a problem related to connectivity between my desktop (Windows) and tablet (Android 4.1). I bought a new device (Colorovo City Tab Vision 7) and now I want to use it for testing of my applications, because emulation of android is very slow on my computer, although I forced it to create snapshot every run.
I have downloaded SDK with Google drivers and also some unofficial drivers I found on web. When I connect my device, it first appears 'Other device' (label is CTVision7) and it's marked as unknown. I tried to install drivers (Google) for it, but windows said that they aren't suitable for my device, as it's not able to find them in specified directory.
After these attempts I tried unofficial drivers. Their installation worked and now my device appears as Android phone, what seems to be good.
But when I run
Code:
adb devices
or launch application in eclipse, there's not avaible device.
I have turned USB debugging on, so it should work.
Am I missing some step to make my device avaible for debugging, or are my drivers wrong? Is there any way to get drivers which surely work?

Categories

Resources