I recently flashed an apparently wrong kdz with LGUP and have as such hardbricked the phone sending it into Qualcomm HS-USB QDLoader 9008 mode with no other signs of life. I stumbled upon this tutorial forum.hovatek (dot) com/thread-19721.html and I want to try and see if it will be of any avail. A good kdz would be awesome aswell.
Related
I think i bricked my phone (Samsung Galaxy Express 2) i think it's a soft-brick. i can't turn my device on or enter recovery or download mode, but my computer recognises my device as Quadcomm HS-USB QDLoader 9008. I've been searching the web for ages and i can't find anything. i hope someone can help me unbrick my phone.
Hello everyone,
i read this thread http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359 and try to unbrick my hardbricked D855. I recently installed Marshmallow 30c and then it bricked. As described in the guide i need the TOT File belonging to the used firmware. Is it possible to use the 30b files? Any other suggestion?
Best regards
Hi
Did you managed to unbrick your lg g3 ?
I am having the same problem
No boot, No recovery, No fastboot or download mode working, phone is completely in dead boot state,
and is recognized as lge androidnet usb serial port, when connected to PC
not as Qualcomm HS-USB QDLoader 9008 mode,
kindly help me if you can
I've sended to LG under warranty. I'm excited if they repair it.
If you have no warranty then follow the following, it's very good. Google for "open-freax.fr lg g3" and follow the guide.
well i figured out myself how to get my optimus zone 2 from qhsusb_bulk to QDLoader 9008 by shorten board but computer does not see phone in download mode.. EFS professional see phone in Online Mode but QFIl see's phone in download mode as well as BoardDiag sees it in download mode. Am i missing a step can some one please help.
tgjr559 said:
well i figured out myself how to get my optimus zone 2 from qhsusb_bulk to QDLoader 9008 by shorten board but computer does not see phone in download mode.. EFS professional see phone in Online Mode but QFIl see's phone in download mode as well as BoardDiag sees it in download mode. Am i missing a step can some one please help.
Click to expand...
Click to collapse
No flash programmer. I ended up unlocked the bootloader with my custom image (its already posted you'll see it) and tinkered around but zeroed out sbl1 in hopes of qcom 9006 mode but thay wasn't the case
tgjr559 said:
well i figured out myself how to get my optimus zone 2 from qhsusb_bulk to QDLoader 9008 by shorten board but computer does not see phone in download mode.. EFS professional see phone in Online Mode but QFIl see's phone in download mode as well as BoardDiag sees it in download mode. Am i missing a step can some one please help.
Click to expand...
Click to collapse
I may have found a flash programmer that may work. I've yet to try it (I have an EDL cable) so I just need a week or so till next Saturday till I have my computer back. If it does work I'll already have the EDL firmware made
Looks like the Zone 2 has a flash programmer (MSM8610) prog_emmc_firehose_8x10.mbn (also for other chipsets of this kind) that will be able to be sent to the device. I will tune back in this weekend with results and if success a new EDL restore thread for the Zone 2 will be made
Hello everyone.
so, as the title says, I got this hard brick, I can't turn on the phone in any way (I don't even got a boot loop). it happened suddenly when I tried to turn the phone on, it had a stock rom (not the one that comes with the phone because it was corrupted by some kind of malware), the phone didn't turn on and the pc recognized it as QHUSB_Bulk, but after I installed the drivers the pc recognized it as Qualcomm HS-USB QDLoader 9008.
I tried with BoardDiag and QFIL but it doesn't worked. I just cant find the TOT file, I tried replacing files like partition.txt from other phones TOT files like the LG G2, but It doesn't works. with QFIL I tried but mixing D325 and D375 files (because I got the kdz and the dz from the D375 so I got some files to use), using the CMD I manage to make it finish the whole proces, but the phone is still bricked.
if anyone can help with the TOT file or another method that I didn't find it would be aprecciated.
Hello all. I'm having trouble flashing a rom on my Xperia 10 plus single SIM(I3223)，The phone becomes a brick，Need to use qualcomm hs-usb qdloader 9008 mode to flash，but I don't have qualcomm hs-usb qdloader 9008 EDL ROM，Can anyone help extract the two underlying files .hex and .mbn from their mobile phones?Thank you very much.