Hello guys,
So recently my honor 9 got broken. I don't really know why but now when I try to start my phone it stuck on the "your device is booting now" screen. This I tried to flash a new rom by twrp, by puting https://forum.xda-developers.com/honor-9/how-to/guide-honor-9-t3653719 these 3 zip into my phone and flash it in twrp. But sadly it didnt work, i always have the error 9.... SO i tried a rebrand but it doesnt work either since when i open the update.Bat the command immediately close itself.
I really have no idea what to do now, can someone please help me out?
PS : I mistyped in the title , of course I mean "can't"
the rebrand will work once you put the hwota folder to the root of your PC. C: on a windows machine.
Related
hello .... sorry for my bad English
at the beginning i was trying to root my mate 9 pro .. every thing went fine until i tried to install super user, then i don't know what happened but the phone was bricked and i cant boot it normally anymore !! i tried to flash several roms through twrp with no luck at all ...
so i started to look for a solution until i found this guide on youtube , i downloaded a tool that screwed my twrp and i can't access it anymore !!
also my pc won't read my phone even through adb .. i can only go to fastboot mode and recovery mode .. please help me !
i just want to get access to twrp again because now i know how to flash roms properly
Hmmm... pat pat this is so sad... I'm kindda getting the same thing as you do, now my phone can only go to fastboot and recovery mode, but what I did is that I tried to flash a custom ROM, I was using the other ROM made by the same team on my other HUAWEI phone for about two years and everything works really well, so I thought this could also works out but not. Since mate9 pro don't have the SD card method of flashing the system, it's really hard to copy the file into the system to modify.
Did you unlock the bootloader and turn on the usb debugging mode before you brick the phone? I happen to have a script that can flash either twrp or the official recovery into the phone, I think if you did those two steps above, it should be working. Also I'm going to try the usb OTG connecting method and see if I can get the file into the system. Good luck on unbrick the phone! Have faith with it!!
this phone use mt6739.so i want to flash it the twrp to my phone.i dunno to unlock the bootloader but the twrp file not have for this device.
I just saw this post as I too have a Honor 7S
There is NO TWRP for our device.
The TWRP for the Honor 7A/7C/7X and Honor 7 doesn't work on our device and you got to pay 4 euros to unlock the bootloader before you can even flash TWRP (and there isn't one)
This Device is treble compatible but now I've found out there is zero development and no Devs Interested in it it's a complete and utter waste of time and has gone back into its box, never to be seen again.
hi there, I get this phone recently (because is old) and I created twrp for i,t so here it is, if you want some fun
you can flash it via flashtool on locked bootloader in to boot partition and after that you push twrp.img via adb to internal storage and flash it in to erecovery and recovery slot, and you are good to go
Samuel Ladziansky said:
hi there, I get this phone recently (because is old) and I created twrp for i,t so here it is, if you want some fun
you can flash it via flashtool on locked bootloader in to boot partition and after that you push twrp.img via adb to internal storage and flash it in to erecovery and recovery slot, and you are good to go
Click to expand...
Click to collapse
Hi I have a problem. I'm having brom issues in trying to flash it
Hi
I thinking you dont have "Authentication file" so you using "mtksecurebootdisabler",
so you need patch your drivers with libusb "patch".
Try this one, for me it works.
So open libusb that you install.
connect your honor7s to the pc with disconnected batery and hold volume down.
in patch option select your usb mtk device "idk how is called" and patch it
after patching reconnect phone and it will works.
usab1oy said:
Hi I have a problem. I'm having brom issues in trying to flash it
Click to expand...
Click to collapse
and little hint
dont flash whole rom if the phone can boot becasue after clean flash "format+download"
you lost log and cust partition because the image files are not secureboot signed and your phone get in to bootloop
and also you lost imei codes so no cellular after that
If you do so
you can fix it in that recovery were I enabled option to format log partition
after you format log to ext4, your phone will boot but without huawei/honor bootanimation
you dont need to worry about cust partition, if you didnt format it it still boot but without bootanimation and you lost some of garbage apps that are in that partition (amazon etc...)
(twrp boots in russian language, idk for now how to change it to boot in english or slovak lanuage (because Im from slovakia) and also it have Lenovo Logo becasuse I use sources from Lenovo A5 that have same cpu)
I will make in future separated thread for this....
Thanks alot for this.. I don't know maybe I should try the disconnected battery. But from a yt link I saw
The link : Honor 7s Dua-Al000
I wonder how his worked
I'll have to know how to disconnect the battery thou. I'm a noob at this.
Samuel Ladziansky said:
Hi
I thinking you dont have "Authentication file" so you using "mtksecurebootdisabler",
so you need patch your drivers with libusb "patch".
Try this one, for me it works.
So open libusb that you install.
connect your honor7s to the pc with disconnected batery and hold volume down.
in patch option select your usb mtk device "idk how is called" and patch it
after patching reconnect phone and it will works.
Click to expand...
Click to collapse
Sorry for the noob question but after patching with the battery disconnected. When I want to use spflash tools would I still use disconnect the battery to flash the recovery and co.
usab1oy said:
Sorry for the noob question but after patching with the battery disconnected. When I want to use spflash tools would I still use disconnect the battery to flash the recovery and co.
Click to expand...
Click to collapse
you can patch it or flash it without disconecting the battery
Here is how:
turn it off
Push and hold volume down
While holding volume down connect usb cable
But is recomended to disconect battery because the phone can boot up instead to go in flash mode.
usab1oy said:
Thanks alot for this.. I don't know maybe I should try the disconnected battery. But from a yt link I saw
The link : Honor 7s Dua-Al000
I wonder how his worked
I'll have to know how to disconnect the battery thou. I'm a noob at this.
Click to expand...
Click to collapse
Well he did with the battery and he add more steps that are not necessary for flashing, like scanning for COM port etc...
When I first try flash my 7s I download flashtool and didn't change any settings, I just load the rom and flash it.
So you must try to find your best way how to do and I will help you
And I wonder how he can flash the Log and Cust partition via flashtool, Maybe he have unlocked bootloader or something
Update: he have in the video description link for "lib usb" but didn't show it in video, or I'm just blind or something
Samuel Ladziansky said:
Well he did with the battery and he add more steps that are not necessary for flashing, like scanning for COM port etc...
When I first try flash my 7s I download flashtool and didn't change any settings, I just load the rom and flash it.
So you must try to find your best way how to do and I will help you
And I wonder how he can flash the Log and Cust partition via flashtool, Maybe he have unlocked bootloader or something
Update: he have in the video description link for "lib usb" but didn't show it in video, or I'm just blind or something
Click to expand...
Click to collapse
Yeah. For the flash mode, I wonder why his own he said I need to hold the volume up and down button at the same time. But thanks I'll do it and let you know.
here is version 3 of twrp recovery port
-fixed language form russia to english
-lenovo banner replaced with original TWRP
Samuel Ladziansky said:
here is version 3 of twrp recovery port
-fixed language form russia to english
-lenovo banner replaced with original TWRP
Click to expand...
Click to collapse
At this point. Might just abandon it. Thanks for everything. Ran into laptop issue on my third trial lol.
Yeah I see, drivers issues, it happens to me too, but I install windows 7 and everything works... but I think is not worth it to format your laptop and install win7 only for this mediatek crap, where you can't unlock bootloader or anything because Huawei trying to protect customers and they believe that their android is best for they're phones
Samuel Ladziansky said:
Yeah I see, drivers issues, it happens to me too, but I install windows 7 and everything works... but I think is not worth it to format your laptop and install win7 only for this mediatek crap, where you can't unlock bootloader or anything because Huawei trying to protect customers and they believe that their android is best for they're phones
Click to expand...
Click to collapse
Honestly. I spend a whole night researching videos for the phone. Only to get that link I send. And after all that. It still didn't work. Lol. I have a Poco x3 pro. I wonder if snapdragon android 12 can be rooted. Probably going to try it next month or so.
Snapdragon is eazy for root.
I have Redmi note 11 and it was easy, now I running on Android 13 from stock android 11, if you will need some help with something, I'm here, and I think there is device forum so there is community for that device
Hello guys! I have a problem with one phone that i am trying to fix for someone and I feel sooo, sooo completely lost in all of this as I know almost nothing about this. The cell phone model that is in question is Alcatel One Touch Pop C3-4033x.
It seems to be using a Mediatek chipset and I was reading some of your advices here & there and tried using the program called SP FlashTools but it always resulted in error, in the end. It seems that something is wrong with this phones emmc flash memory. So, I tried transfering some files as a zip files to the SD-card and tried to apply update from it, but it said always: Installation aborted. And then, I have tried looking for a way to flash stock firmware of that specific Alcatel model on SD-card, but I just don't have any clue how to do it, if it is possible, even. Maybe I should just give up trying?
Oh, I almost forgot to write that the phone doesn't have the access to Android OS and USB debugging isn't turned on, because computer doesn't seem to list it and I don't know if there any button combinations that Alcatel uses for this model to get into that fastboot or adb mode, even though have installed mediatek drivers. It can only get into Android System Recovery 3e. That seems to be everything, I think, at least.
Oh guys, I am so, so, so sorry if I am bothering you with this. I just didn't know what or where else to ask this. Thank you sooo much!
Hi download those files:
Firmware:
https://www.mediafire.com/file/bpm4ibsbmr4q6nc/OT-4033X-Without_Mobilis_logo__BY_GSMSERVE.rar/file
SP Flash tool:
https://androidfilehost.com/?fid=11410963190603870440
Driver:
https://mega.nz/#!8VYkQCxD!fkhTrZwFFILDAglO1cR_8pIM4Cel52brZ7RB6QZoc6o
Once you downloaded all right driver open SP flash tool and add Scatter file
MT6572_Android_scatter.txt
Click on Download , connect your phone without battery and see if the process is going on if not try again with battery inside.
If you end up with error do the same thing but now first do Format then after is Finish do Download. Good luck ...
It still displays error :/
Teddy Lo said:
I have tried to do everything like you have said, but it still displays error when i press the Download button, and it displays that error after some seconds pass and also the same happens hen i try to use the Format function. This is the error it displays when i tried with the download button: BROM ERROR: S_DA_SDMMC_WRITE_FAILED (3149)
And this is the same error it displayed when i tried using the Format function: S_DA_SDMMC_WRITE_FAILED (3149)
i am so, so sorry for bothering with this.
Click to expand...
Click to collapse
Try with another version of SP Flash tool little bit newest .
Hello everyone. A couple of days ago, I bricked my huawei mate 10 pro BLA-AL00 by flashing the wrong firmware. After a few days of experimentation, I was able to revive the phone by flashing the board software back onto the phone. Now the problem is that I am on a super early build of emui and it seems like its the stock factory software with a bunch of debugging programs on it. I am having some trouble updating the firmware to android 8. I downloaded this exact firmware file: https://androidhost.ru/bzx
I am having some trouble figuring out what files I need to flash. There is a main dload folder after extracting the files, but if I try to copy that onto a usb drive and flash it using the dload method, my phone will once again brick itself. I have tried flashing the all_cn firmware file using TWRP recovery, but that also bricks my device and puts it into a bootloop. I have also tried using the huawei update file extractor software and tried manually flashing the firmware using fastboot commands, but once again will just end up in a bootloop. Am i doing something wrong? I would really appreciate any help. Thanks
Hi,
I'm in the exactly same case. Did you manage to fix it?
iBen68 said:
Hi,
I'm in the exactly same case. Did you manage to fix it?
Click to expand...
Click to collapse
I finally managed to figure everything out after days of research and testing. You must download the BLA-AL00 8.1.0.351 full ota firmware from pro-teammt.ru and extract the update.zip folder. Next, I used MRT Dongle 3.19 cracked to flash the firmware. https://www.gadgetsdr.com/mrt-dongle-latest-crack/ To activate the program, you must use the keygen provided to generate a activation code after pasting in your device id. The device id can be found by opening the mrt program for the first time. Paste in the activation code found by the keygen into the activator and the program should open. Next, click on hw flasher and put your phone into fastboot mode. Make sure your bootloader is unlocked. I assume it is unlocked as you only flashed the board firmware. Under write flash click on the 3 dots near the bottom of the page, select the update.app file you extracted before, and click on start. Don't worry if it says fail for the first few commands. It should successfully flash everything else. Once this process is finished, your phone should reboot. We need to do one final step and write the oeminfo back into the phone. Put your phone back into fastboot mode by plugging in your phone and holding down the power and volume down buttons. In MRT, click on update hw soft_ver, select huawei mate 10 pro, and click on start. After flashing, your phone should reboot normally now into an operating system!!!
Thank you for your answer ! My Mate 10 Pro is BLA-L09, how did you know you have to use this specific firmware (BLA-AL00 8.1.0.351 full ota firmware) for your BLA-AL00? I guess I should use BLA-L09 full ota but which version?
iBen68 said:
Thank you for your answer ! My Mate 10 Pro is BLA-L09, how did you know you have to use this specific firmware (BLA-AL00 8.1.0.351 full ota firmware) for your BLA-AL00? I guess I should use BLA-L09 full ota but which version?
Click to expand...
Click to collapse
It took me a very long time and a large amount of downloading to figure out the exact firmware I needed to use. I just downloaded a bunch of version and see if it would flash onto my phone. Finally, the 8.1.0.351 firmware worked! For the bla-l09, im not too sure the exact version needed. I would experiment around and try a bunch of different full ota firmware from pro-teammt.ru Maybe you could flash the bla-al00 firmware and rebrand the phone? Im not too familiar with rebranding, but I know its possible.
I have tried with BLA-L09 8.0.0.115 firmware then my phone has reboot in a better factory version (EMUI 8 instead of EMUI 5), but still in factory mode, with the developpers apps. I've done the hw soft_ver update, but it still boot on this factory version. I've tried to flash another firmware (still BLA-L09 but another version), and now my phone stays shut down. I cannot even see it on my COM port. I've tried to use test point, I can hear the USB plug computer song but nothing happen. Phone no detected, black screen, no vibration. I've tested all the possible key combinaison (volume up, volume down, power button), still nothing .
Any idea of a last chance?
I was so close thank to your help!
Hi guys, I did something very stupid, flashed the wrong boot.img and ended up completely bricking my device. I tried changing the active partition to see if it would boot, that didn't help.
I was on the latest august update of official android 11 . Then I found a boot.img I found online, but apparently it wasn't from the exact same rom. The phone booted but no WIFI.
It wouldn't allow me to flash any update through settings - system update hence I decided to try to use a fastboot rom....tried that, but the process when I hit flash_all.bat gives a lot of FAILED (remote: Flashing is not allowed for critical particions) or FAILED (Error reading sparse file)....what am I doing wrong?
I can't do anything except get in fastboot.
Is there any way I can get the phone to work agan? Needless to say that as the idiot I am the whole phone is wiped so this doesn't matter anymore. As long as I can get it to work.
Please advise and thanks (The phone is OP7T Pro ME european).
You can use this tool: https://forum.xda-developers.com/t/...l-to-restore-your-device-to-oxygenos.4002909/
leginhee said:
You can use this tool: https://forum.xda-developers.com/t/...l-to-restore-your-device-to-oxygenos.4002909/
Click to expand...
Click to collapse
Thanks the problem is i can't get it to start qualcomm edl. I power off, press both vol buttons and conmect to usb but nothing happens. What am i doing wrong?
Qualcomm edl Mode is just a blackscreen
"I can't do anything except get in fastboot."
Your Bootloader was unlocked ?
You can try fastboot reboot edl.
Or you can find a ROM that works, extract all images and flash all of them.
I have a similar problem.. kind of. I just flashed a rooted boot to my phone but there is no wifi at all, and since i dont have a SIM card im not getting any updates. the Boot.img came from the oneplus software update and i did the payload dumper. Since I have rooted it ive lost the wifi capabilites. (its the 7T pro me international.)