Related
Hello!
I think my MMX Canvas HD A116 has been soft bricked. :crying:
I'd installed DOGE http://forum.xda-developers.com/showthread.php?t=2663763 ROM, and it was working fine. After that I tried to get backup using Nandroid Manager but it was failed. So, I restarted phone in CWM Recovery mode and tried to backup data from there.
But after that, my phone went dead.
Screen starts for few seconds but it is not showing boot logo and even I'm not able to go into recovery mode also!
My PC or SP Flash Tool is also not recognizing phone.
Will USB Jig work for MMX phones? Is there any hope?!
Please help!
try to reinstall the drivers.. and then connect your device through sptools.
kalpesh_36 said:
try to reinstall the drivers.. and then connect your device through sptools.
Click to expand...
Click to collapse
I tried that.
Still not working! :crying:
try this
1. Turn off the phone by
removing battery.
2. Press and hold the Power button along with both the
‘Volume +’ and ‘Volume -’ buttons until the screen
displays two options.(volume keys first then power key .
after 5-10 seconds holding, Then 2 option will appear)
3. Press the ‘Volume +’ button to enter Recovery Mode.
wipe dalvik, data, cache partion. install MIUI or pure xperia
z2(my choice only, you can try any stable rom) from your
memory card.
shivrajsingh said:
try this
1. Turn off the phone by
removing battery.
2. Press and hold the Power button along with both the
‘Volume +’ and ‘Volume -’ buttons until the screen
displays two options.(volume keys first then power key .
after 5-10 seconds holding, Then 2 option will appear)
3. Press the ‘Volume +’ button to enter Recovery Mode.
wipe dalvik, data, cache partion. install MIUI or pure xperia
z2(my choice only, you can try any stable rom) from your
memory card.
Click to expand...
Click to collapse
Thank you Shivraj for replying.
But as I said in earlier post, my phone is not going into recovery mode. As I press "Volume +" button, it goes off. I wish somehow I can at least boot my phone into recovery mode!
Have anyone tried USB jig for Micromax phones?
aryankirtan said:
Thank you Shivraj for replying.
But as I said in earlier post, my phone is not going into recovery mode. As I press "Volume +" button, it goes off. I wish somehow I can at least boot my phone into recovery mode!
Have anyone tried USB jig for Micromax phones?
Click to expand...
Click to collapse
i guess usb jig only works for Samsung phones..but since u r saying that the device does power on for a second...mayb its not completely bricked...try installing the correct drivers..see if that works?
edwardpage said:
i guess usb jig only works for Samsung phones..but since u r saying that the device does power on for a second...mayb its not completely bricked...try installing the correct drivers..see if that works?
Click to expand...
Click to collapse
That right. Even if USB Jig works on MTk, it will also result in rebooting after 2-3 seconds which you are getting after pressing volume + button. You can only install correct MTK drivers and then install stock rom.
Download Flash Tool , Stock ROM AND USB Driver From Above LINK
NOW Create Folder IN Desktop Give It Name "FLASH"
Copy All Downloaded File In Recently Created Folder "FLASH"
Extract 'SP_Flash_Tool_v3.1304.0.119.rar' AND Also Extract Stock ROM File
NOW Open SP Flash Tools Folder AND Double Click ON "Flashtool.exe"
In Flashtool..Click On SCATTER-LOADING(FOUND IN RIGHT-SIDE) AND Select SCATTER File From STOCK ROM'S Folder
Flashtool Automatic Select All IMGs AND FILEs
NOW Completely Turn Off Your Phone
In Flashtool..Click On "DOWNLOAD" Button
Install USB Driver AND Connect Your Device To Computer
If Everything Is Right Then Process Will Start...Wait Till All Progress Completion
After All Process "GREEN CIRCLE" Appear In Center..
DISCONNECT PHONE AND POWER ON...THAT'S ALL
the correct drivers for mediatek is attached below.
Also, the process after "In Flashtool..Click On "DOWNLOAD" Button" , should be:
1. Open device manager
2. Connect your phone to PC through data cable.
3. New device will appear in device manager for 5-10 seconds only.
4. Quickly right click on newly appeared device and selected update driver.
5. Select drivers from downloaded and extracted attachment.
6. It will successfully install driver.
7. Remove data cable from phone and again insert it in phone.
8. SP tools will recognize it and automatically start flashing since you have already pressed download button earlier.
9. Flashing will complete in 3-4 minutes.
Thank you so much! Finally unbricked my MMX A116
shivrajsingh said:
That right. Even if USB Jig works on MTk, it will also result in rebooting after 2-3 seconds which you are getting after pressing volume + button. You can only install correct MTK drivers and then install stock rom.
Download Flash Tool , Stock ROM AND USB Driver From Above LINK
NOW Create Folder IN Desktop Give It Name "FLASH"
Copy All Downloaded File In Recently Created Folder "FLASH"
Extract 'SP_Flash_Tool_v3.1304.0.119.rar' AND Also Extract Stock ROM File
NOW Open SP Flash Tools Folder AND Double Click ON "Flashtool.exe"
In Flashtool.. Click On SCATTER-LOADING(FOUND IN RIGHT-SIDE) AND Select SCATTER File From STOCK ROM'S Folder
Flashtool Automatic Select All IMGs AND FILEs
NOW Completely Turn Off Your Phone
In Flashtool..Click On "DOWNLOAD" Button
Install USB Driver AND Connect Your Device To Computer
If Everything Is Right Then Process Will Start...Wait Till All Progress Completion
After All Process "GREEN CIRCLE" Appear In Center..
DISCONNECT PHONE AND POWER ON...THAT'S ALL
the correct drivers for mediatek is attached below.
Also, the process after "In Flashtool..Click On "DOWNLOAD" Button" , should be:
1. Open device manager
2. Connect your phone to PC through data cable.
3. New device will appear in device manager for 5-10 seconds only.
4. Quickly right click on newly appeared device and selected update driver.
5. Select drivers from downloaded and extracted attachment.
6. It will successfully install driver.
7. Remove data cable from phone and again insert it in phone.
8. SP tools will recognize it and automatically start flashing since you have already pressed download button earlier.
9. Flashing will complete in 3-4 minutes.
Click to expand...
Click to collapse
Thank you soooo much man. You saved my day... :good:
This drivers worked perfectly and with this method, I finally UNBRICKED my Micromax A116 handset.
Use this drivers for using SP Flash tool with MMX A116.
Perfect!
Thank you Shivraj Singh... :good:
aryankirtan said:
Thank you soooo much man. You saved my day... :good:
This drivers worked perfectly and with this method, I finally UNBRICKED my Micromax A116 handset.
Use this drivers for using SP Flash tool with MMX A116.
Perfect!
Thank you Shivraj Singh... :good:
Click to expand...
Click to collapse
Most welcome
shivrajsingh said:
That right. Even if USB Jig works on MTk, it will also result in rebooting after 2-3 seconds which you are getting after pressing volume + button. You can only install correct MTK drivers and then install stock rom.
Download Flash Tool , Stock ROM AND USB Driver From Above LINK
NOW Create Folder IN Desktop Give It Name "FLASH"
Copy All Downloaded File In Recently Created Folder "FLASH"
Extract 'SP_Flash_Tool_v3.1304.0.119.rar' AND Also Extract Stock ROM File
NOW Open SP Flash Tools Folder AND Double Click ON "Flashtool.exe"
In Flashtool..Click On SCATTER-LOADING(FOUND IN RIGHT-SIDE) AND Select SCATTER File From STOCK ROM'S Folder
Flashtool Automatic Select All IMGs AND FILEs
NOW Completely Turn Off Your Phone
In Flashtool..Click On "DOWNLOAD" Button
Install USB Driver AND Connect Your Device To Computer
If Everything Is Right Then Process Will Start...Wait Till All Progress Completion
After All Process "GREEN CIRCLE" Appear In Center..
DISCONNECT PHONE AND POWER ON...THAT'S ALL
the correct drivers for mediatek is attached below.
Also, the process after "In Flashtool..Click On "DOWNLOAD" Button" , should be:
1. Open device manager
2. Connect your phone to PC through data cable.
3. New device will appear in device manager for 5-10 seconds only.
4. Quickly right click on newly appeared device and selected update driver.
5. Select drivers from downloaded and extracted attachment.
6. It will successfully install driver.
7. Remove data cable from phone and again insert it in phone.
8. SP tools will recognize it and automatically start flashing since you have already pressed download button earlier.
9. Flashing will complete in 3-4 minutes.
Click to expand...
Click to collapse
Hello sir pls. Help me. I too want to flash the v5 of stock ROM but i the driver you have suggested below contains nothing.pls help how to proceed ahead.
alex279 said:
Hello sir pls. Help me. I too want to flash the v5 of stock ROM but i the driver you have suggested below contains nothing.pls help how to proceed ahead.
Click to expand...
Click to collapse
They contain drivers only. SP tools and stock rom needs to be downloaded separately.
need help for drivers
shivrajsingh said:
They contain drivers only. SP tools and stock rom needs to be downloaded separately.
Click to expand...
Click to collapse
very much thankful for the reply.... i am having the other 2 but facing problem with only the drivers, going through sp tools...scatter loading...download....no detection of my device... this might be due to drivers. i found nothing in your 11kb drivers. pls suggest me how i can download the correct drivers. pls. if possible elaborate it stepwise(as i m doing it for the first time/newbie)......hope a quick reply from your side
alex279 said:
very much thankful for the reply.... i am having the other 2 but facing problem with only the drivers, going through sp tools...scatter loading...download....no detection of my device... this might be due to drivers. i found nothing in your 11kb drivers. pls suggest me how i can download the correct drivers. pls. if possible elaborate it stepwise(as i m doing it for the first time/newbie)......hope a quick reply from your side
Click to expand...
Click to collapse
Which windows version, u r using??
.....!!!!!
shivrajsingh said:
Which windows version, u r using??
Click to expand...
Click to collapse
Using windows 8 - 64Bit
alex279 said:
Using windows 8 - 64Bit
Click to expand...
Click to collapse
First disable driver signing (Windows 8 users Only)
use this link for tutorial.....
https://learn.sparkfun.com/tutorial...abling-signed-driver-enforcement-on-windows-8
Now extract the mtk universal driver attachment.
1. Open device manager
2. Connect your phone to PC through data cable.
3. New device will appear in device manager for 5-10 seconds only.
4. Quickly right click on newly appeared device and selected update driver.
5. Select drivers from downloaded and extracted attachment.(right click on new appeared device -> browse my computer for drivers-> browse windows 7 drivers i.e. usb2ser_Win764 in extracted folder)
6. It will successfully install driver.
7. Remove data cable from phone and again insert it in phone.
8. SP tools will recognize it and automatically start flashing since you have already pressed download button earlier.
9. Flashing will complete in 3-4 minutes.
Hello many thnx to you for this useful info. Now i have flashed the device successfully.... Pls. if you can help me to swap the phone storage with the external sd card then it would be great help for me. Actually i have tried to do so but some how i bricked the device & that is why i have to flash.... Pls. Sir give me details guide on how to swap memory on canvas HD A116
Sent from my Micromax A116i using XDA Premium 4 mobile app
alex279 said:
Hello many thnx to you for this useful info. Now i have flashed the device successfully.... Pls. if you can help me to swap the phone storage with the external sd card then it would be great help for me. Actually i have tried to do so but some how i bricked the device & that is why i have to flash.... Pls. Sir give me details guide on how to swap memory on canvas HD A116
Sent from my Micromax A116i using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hello friend,
Try this way: http://forum.xda-developers.com/showthread.php?t=2346389
As it works on MediaTek devices and MMX A116 is one of this.
pls suggest me how i can download the correct drivers.
aryankirtan said:
Hello!
I think my MMX Canvas HD A116 has been soft bricked. :crying:
I'd installed DOGE http://forum.xda-developers.com/showthread.php?t=2663763 ROM, and it was working fine. After that I tried to get backup using Nandroid Manager but it was failed. So, I restarted phone in CWM Recovery mode and tried to backup data from there.
But after that, my phone went dead.
Screen starts for few seconds but it is not showing boot logo and even I'm not able to go into recovery mode also!
My PC or SP Flash Tool is also not recognizing phone.
Will USB Jig work for MMX phones? Is there any hope?!
Please help!
Click to expand...
Click to collapse
It had to me once, when I was going to flash the stock rom from SP Flash tools. I think there was some drivers problem, and the process stopped in between, and when i tried to turn the phone on, it only emitted some light and would stay that until the battery would drain. After a few days, it went dead, no response. This was the time I realized that I had to give it to a service center. Unfortunately, the service was awfully bad, and my phone came repaired back after 3 MONTHS! So, I recommend, that you hand it over to a non-micromax service center (as your warranty is now void), and try your luck! All the best!
P.S. My CHD is working awesome now, installed MiUi
[email protected] said:
pls suggest me how i can download the correct drivers.
Click to expand...
Click to collapse
download Mt65xx vcom drivers then see the video below
---------- Post added at 12:54 PM ---------- Previous post was at 12:06 PM ----------
aryankirtan said:
Thank you Shivraj for replying.
But as I said in earlier post, my phone is not going into recovery mode. As I press "Volume +" button, it goes off. I wish somehow I can at least boot my phone into recovery mode!
Have anyone tried USB jig for Micromax phones?
Click to expand...
Click to collapse
just flash the stock backup using SP flash tool
Hi All,
Have seen the numerous posts on this forum for the Lenovo P780, but cannot for the life of me get mine to work again
Model: P780 4GB (believe it is the Chinese version as when I first started it, Android was in Chinese (hence me trying to replace the ROM).
Here are the symptoms:
Black screen, won't power on, cannot even get into factory reset mode.
Tried the reset button on the back of the phone (some say 3-5 seconds others say 20 seconds - Tried both, nothing!).
Tried to fix the problem by doing the following:
Download the SP Flash Tools version 5.1352.01 and ran them on my Windows 7 Machine as Administrator.
Loaded the P780_ROW_S226_4GB_KIT_KAT (as this is what I thought would do the trick.)
Selected the MT6589_Android_scatter_emmc.txt file and then Firmware Upgrade set, then hit download, connected the phone to the laptop (red light on the phone), SP Flash Tool then goes to 100% Download DA (in red), and then the message "Unrecognized ROM detected".
That's it nothing else. Can't power on the phone.
Any advice help would be appreciated before I throw this phone through a window!!!
Thanks,
Mak.
makavelli12 said:
Hi All,
Have seen the numerous posts on this forum for the Lenovo P780, but cannot for the life of me get mine to work again
Model: P780 4GB (believe it is the Chinese version as when I first started it, Android was in Chinese (hence me trying to replace the ROM).
Here are the symptoms:
Black screen, won't power on, cannot even get into factory reset mode.
Tried the reset button on the back of the phone (some say 3-5 seconds others say 20 seconds - Tried both, nothing!).
Tried to fix the problem by doing the following:
Download the SP Flash Tools version 5.1352.01 and ran them on my Windows 7 Machine as Administrator.
Loaded the P780_ROW_S226_4GB_KIT_KAT (as this is what I thought would do the trick.)
Selected the MT6589_Android_scatter_emmc.txt file and then Firmware Upgrade set, then hit download, connected the phone to the laptop (red light on the phone), SP Flash Tool then goes to 100% Download DA (in red), and then the message "Unrecognized ROM detected".
That's it nothing else. Can't power on the phone.
Any advice help would be appreciated before I throw this phone through a window!!!
Thanks,
Mak.
Click to expand...
Click to collapse
Now step by step how to doit. This is the hard part for beginners:
1. download in your computer the drivers from here. Go to the bottom of the page.
2. install drivers
3. restart your computer (just to be sure).
4. now...with your phone allready powered off...
5. plug your USB cable in your computer
5.1 open the device manager...
6. plug your USB cable in your phone
7. new hardware detected should appear... and should install drivers automaticaly, if not grab fast the new thing appeared in device manager and install the seccond set of the drivers.
8. after the drivers are installed unplug your cable from the phone and restart your computer (just to be sure)
9. after restart of your computer download the ROM ,unzip to a known folder; skip this step if you have allready your firmware
10. now load scatter file from ROM directory(should be target_bin directory)
11. check DA,DL WITH CHECKSUM (NOT OPTIONAL) if you flash with SP Flash Tool v3, if you sflash with SP Flash Tool v5 skip this step.
12. press Firmware Upgrade button (NOT DOWNLOAD BUTTON) if you flash with SP Flash Tool v3, if you sflash with SP Flash Tool v5 select Firmware Upgrade and press Download Button
13. now just now plug usb cable to your phone.
14. firmware flash should start.(some red and other color lines should appear)
15. if the firmware is not starting remove the back case of your phone and hold pressed the little red button from the right side, for about 20 seconds then release. All this must be done with cable pluged in to your phone.
16. after flash is done a green circle should appear
18. disconect your phone and power on your phone
19. lenovo logo should appear. then you should be pacient because it will took some time before android boots for the first time.
20. Reboot at least once then your phone is ready to work HARD.
21. Good luck. Hope This Helps You.
stympy said:
Now step by step how to doit. This is the hard part for beginners:
1. download in your computer the drivers from here. Go to the bottom of the page.
2. install drivers
3. restart your computer (just to be sure).
4. now...with your phone allready powered off...
5. plug your USB cable in your computer
5.1 open the device manager...
6. plug your USB cable in your phone
7. new hardware detected should appear... and should install drivers automaticaly, if not grab fast the new thing appeared in device manager and install the seccond set of the drivers.
8. after the drivers are installed unplug your cable from the phone and restart your computer (just to be sure)
9. after restart of your computer download the ROM ,unzip to a known folder; skip this step if you have allready your firmware
10. now load scatter file from ROM directory(should be target_bin directory)
11. check DA,DL WITH CHECKSUM (NOT OPTIONAL) if you flash with SP Flash Tool v3, if you sflash with SP Flash Tool v5 skip this step.
12. press Firmware Upgrade button (NOT DOWNLOAD BUTTON) if you flash with SP Flash Tool v3, if you sflash with SP Flash Tool v5 select Firmware Upgrade and press Download Button
13. now just now plug usb cable to your phone.
14. firmware flash should start.(some red and other color lines should appear)
15. if the firmware is not starting remove the back case of your phone and hold pressed the little red button from the right side, for about 20 seconds then release. All this must be done with cable pluged in to your phone.
16. after flash is done a green circle should appear
18. disconect your phone and power on your phone
19. lenovo logo should appear. then you should be pacient because it will took some time before android boots for the first time.
20. Reboot at least once then your phone is ready to work HARD.
21. Good luck. Hope This Helps You.
Click to expand...
Click to collapse
Hi Stympy,
I have managed to get an Android ROM installed on the P780. Details are:
Android version 4.2.1
Build: P780_S136_140306
The only problem now is that the rear camera does not work, and have been told that trying to install a non-standard ROM could have blown the rear camera.
As I am not experienced with flashing these (or any other types of smartphones), I have no idea if this is correct.
Any advice would be appreciated.
Mak.
makavelli12 said:
Hi Stympy,
I have managed to get an Android ROM installed on the P780. Details are:
Android version 4.2.1
Build: P780_S136_140306
The only problem now is that the rear camera does not work, and have been told that trying to install a non-standard ROM could have blown the rear camera.
As I am not experienced with flashing these (or any other types of smartphones), I have no idea if this is correct.
Any advice would be appreciated.
Mak.
Click to expand...
Click to collapse
Look what i want you to do !
1. go here and download your firmware
2. go here and download this preloader.
3. replace the original preloader with the one from step 2.
4. reflash firmware and tell me what happent !
5. waiting for reply...
stympy said:
Look what i want you to do !
1. go here and download your firmware
2. go here and download this preloader.
3. replace the original preloader with the one from step 2.
4. reflash firmware and tell me what happent !
5. waiting for reply...
Click to expand...
Click to collapse
Hi Stympy,
Carried out the steps you listed, and I now get the message "Unrecognized ROM detected".
makavelli12 said:
Hi Stympy,
Carried out the steps you listed, and I now get the message "Unrecognized ROM detected".
Click to expand...
Click to collapse
Got to say a BIG thank you to Stympy who got my P780 back working again!!! A magician!!!!
Thanks again!:good:
Hi Guys !!!
I recently Soft Bricked My A311 and it was totally DEAD !!!!!! BUT AFTER TWO DAYS HARD WORK FINALLY GOT IT WORKING TOTALLY FINE FROM DEAD STATE !!!!
FOR BRIEFLY EXPLAINING VIDEOS N SHOWING ACTUAL FLASHING CLICK HERE
When To Use My Meathod :-
1.Not able to flash any ROM (Every Rom Fails)
2.Error Message "Unable to mount /Data" OR "Unable to mount /cache" while flashing Rom
3.Internal Storage Error "No such directory exists "
4.Unable to Boot ur device in any way
The Only Meathod I Suggest Is To Flash Stock Rom Using YGDP tool ........
BEFORE ACTUAL PROCESS FOLLOW THESE STEPS !!!!!
1.First u need to Download Micromax A310/A311 Stock Rom and YGDP tool for for this click on this link -http://androidxda.com/download-micromax-stock-rom-models
2.U need a usb cable with Standard Configuration
3.And Offcourse Ur Bricked Device
Now The Actual Process>>>>>>>
1.Unzip The Download Stock ROM rar into any directory of ur Computer(WINDOWS) and after unziping u will get a file in .CPB Format
2.Install YGDP Tool on the System by clicking next next next but Dont Run
3.Now the most Important and the most Tricky Part To Install The Device Drivers On The System...... If u already have drivers installed then u dont need to do this part...........To do this there r different methods for different OS of windows but i prefer Windows 7.......... steps r given below:
a . Go to start in Windows
b. Right click on computer and open manage
c. Device Manager will open
d. Now remove the battery of ur bricked phone and connect it to the pc via the USB Cable
e. Just on connecting usb cable hold volume down button and quickly press the power button around 10 times for system to detect
f. Then the MT65XXX divers installation will get started on the system
h. When the installtion get finished unplug the usb cable
i. Now again plug the usb cable without battery on device and u will see aditional port in device manager for 3-5 Sec named as MTXXX preloder blah blah
4. Seting Up YGDP Tool:-
a.As Installed Earlier u will see a YDGP shortcut on deskop
b.If it Stops working then dont panic Just go to application setting and set compatibility to windows 7
c.Now on opening it will ask for password ........type 369 in password and press enter
d.then the application will start
e.Now u will see a Config Icon on the left top ........Open it
f.Now a window will open with devices on left and CPB select on right .......
h.Now on right side select 8297W_I01 for A310 and for A311 select 8297W only !!!1
g.Now on right side browse the CPB file in ur system which u got on unziping the stock ROM
h.Click Apply and the CPB file check will start ........it will take aroung 2-5 Min
i.on completion u will again come on the home page ...
j.Now on the left top side of the application u will see Start icon ......click on it
k.Now connect ur bricked device via usb cable without battery and in power off state
l.Now if everything went correct then the Cell 0 icon will change into downloading icon ......it means ur phone is detected
m.Flashing will automatically start and will take around 5min
n. On completion the Cell 0 will become 100%
o. Unplug usb cable
p. REBBOOT DEVICE!!!!!!
CONGRATES UR DEVICE WILL RISE FROM THE DEAD !!!!! ENJOY !!!!!!!
AND DONT FORGET TO HIT THANKS IF I HELPED
not working
amitsharad7 said:
Hi Guys !!!
I recently Soft Bricked My A311 and it was totally DEAD !!!!!! BUT AFTER TWO DAYS HARD WORK FINALLY GOT IT WORKING TOTALLY FINE FROM DEAD STATE !!!!
I WILL UPLOAD A VIDEO ON YOUTUBE OF WHOLE PROCESS SOON
When To Use My Meathod :-
1.Not able to flash any ROM (Every Rom Fails)
2.Error Message "Unable to mount /Data" OR "Unable to mount /cache" while flashing Rom
3.Internal Storage Error "No such directory exists "
4.Unable to Boot ur device in any way
The Only Meathod I Suggest Is To Flash Stock Rom Using YGDP tool ........
BEFORE ACTUAL PROCESS FOLLOW THESE STEPS !!!!!
1.First u need to Download Micromax A310/A311 Stock Rom
a. For A310 Stock ROM ....Download From NEEDROM
b. For A311 Stock ROM .....Download From NEEDROM
2.Now Download YGDP FLASH TOOL from NEEDROM MICROMAX A311 SECTION THERE U WILL FIND THE DOWNOAD OPTION OR SEARCH WEB (JUST DOWNLOAD THE TOOL)
3.U need a usb cable with Standard Configuration
4.And Offcourse Ur Bricked Device
Now The Actual Process>>>>>>>
1.Unzip The Download Stock ROM rar into any directory of ur Computer(WINDOWS) and after unziping u will get a file in .CPB Format
2.Install YGDP Tool on the System by clicking next next next but Dont Run
3.Now the most Important and the most Tricky Part To Install The Device Drivers On The System...... If u already have drivers installed then u dont need to do this part...........To do this there r different methods for different OS of windows but i prefer Windows 7.......... steps r given below:
a . Go to start in Windows
b. Right click on computer and open manage
c. Device Manager will open
d. Now remove the battery of ur bricked phone and connect it to the pc via the USB Cable
e. Just on connecting usb cable hold volume down button and quickly press the power button around 10 times for system to detect
f. Then the MT65XXX divers installation will get started on the system
h. When the installtion get finished unplug the usb cable
i. Now again plug the usb cable without battery on device and u will see aditional port in device manager for 3-5 Sec named as MTXXX preloder blah blah
4. Seting Up YGDP Tool:-
a.As Installed Earlier u will see a YDGP shortcut on deskop
b.If it Stops working then dont panic Just go to application setting and set compatibility to windows 7
c.Now on opening it will ask for password ........type 369 in password and press enter
d.then the application will start
e.Now u will see a Config Icon on the left top ........Open it
f.Now a window will open with devices on left and CPB select on right .......
h.Now on right side select 8297W_I01 for A310 and for A311 select 8297W only !!!1
g.Now on right side browse the CPB file in ur system which u got on unziping the stock ROM
h.Click Apply and the CPB file check will start ........it will take aroung 2-5 Min
i.on completion u will again come on the home page ...
j.Now on the left top side of the application u will see Start icon ......click on it
k.Now connect ur bricked device via usb cable without battery and in power off state
l.Now if everything went correct then the Cell 0 icon will change into downloading icon ......it means ur phone is detected
m.Flashing will automatically start and will take around 5min
n. On completion the Cell 0 will become 100%
o. Unplug usb cable
p. REBBOOT DEVICE!!!!!!
CONGRATES UR DEVICE WILL RISE FROM THE DEAD !!!!! ENJOY !!!!!!!
IF U FACE ANY PROBLEM ANYWHERE AND WHATSAPP ME OR CALL ME EVEN ON 9927445068 BECAUSE I KNOW KI JAB PHONE BRICK HOTA HE TOH KITNE FHATI HE!!!!
AND DONT FORGET TO HIT THANKS IF I HELPED
Click to expand...
Click to collapse
i also bricked my nitro a311.... all checked all the step above.. but it stuck at the entering download mode .. nothing happens after thst..
please help me
I can't install the driver thats my prolem
Help me
Refer this
Ben02 said:
I can't install the driver thats my prolem
Help me
Click to expand...
Click to collapse
bro i had explained in detail .. you can visit it here...
http://forum.xda-developers.com/a310/help/solved-unbricked-a311-a310-nitro-t3187580
got stsuck
A311.. entering download mode... got stuck here help me help me!.. please
bro .. you can try to flash the stock ROM.... I will surely fix the problem... refer the link given in above reply
Thanks for your help. It might be so help ful for everyone
Sent from my Micromax A311 using XDA Free mobile app
My computer didn't detect my a311.So what can I do??? Pls help me...I have vcom,sp tool drivers and more
Sent from my Micromax A311
thanks for the procedure
fails in ygdp @ 83 percent everytime
ygdp tool fails while downloading the cpb
:crying::crying: a311
I m facing a problem. It stuck in 98%. I cant flash the rom. I download the rom and ygdp tool and install drivers successfully. After i choose 8297w for my a311 and select the cpb file. It unzib the file and so on. Then i select start the cell 0 is entered in download mode and stuck in 98%. Please help me buddy
moulishankar said:
I m facing a problem. It stuck in 98%. I cant flash the rom. I download the rom and ygdp tool and install drivers successfully. After i choose 8297w for my a311 and select the cpb file. It unzib the file and so on. Then i select start the cell 0 is entered in download mode and stuck in 98%. Please help me buddy
Click to expand...
Click to collapse
I'm too stuck with the same issue. But I've some what positive progress. It shows in 25 secs the failure message. So please help me too!!
Note: complete history of my case can be found here!
Thanks It works
Thanks for the post it saved me a lot troubles. .Had trouble finding free MT65XX. Please donwlaod it from by searching "SP flash tool + mediatek" mt65xx.
amitsharad7 said:
Hi Guys !!!
I recently Soft Bricked My A311 and it was totally DEAD !!!!!! BUT AFTER TWO DAYS HARD WORK FINALLY GOT IT WORKING TOTALLY FINE FROM DEAD STATE !!!!
FOR BRIEFLY EXPLAINING VIDEOS N SHOWING ACTUAL FLASHING CLICK HERE
When To Use My Meathod :-
1.Not able to flash any ROM (Every Rom Fails)
2.Error Message "Unable to mount /Data" OR "Unable to mount /cache" while flashing Rom
3.Internal Storage Error "No such directory exists "
4.Unable to Boot ur device in any way
The Only Meathod I Suggest Is To Flash Stock Rom Using YGDP tool ........
BEFORE ACTUAL PROCESS FOLLOW THESE STEPS !!!!!
1.First u need to Download Micromax A310/A311 Stock Rom and YGDP tool for for this click on this link -http://androidxda.com/download-micromax-stock-rom-models
2.U need a usb cable with Standard Configuration
3.And Offcourse Ur Bricked Device
Now The Actual Process>>>>>>>
1.Unzip The Download Stock ROM rar into any directory of ur Computer(WINDOWS) and after unziping u will get a file in .CPB Format
2.Install YGDP Tool on the System by clicking next next next but Dont Run
3.Now the most Important and the most Tricky Part To Install The Device Drivers On The System...... If u already have drivers installed then u dont need to do this part...........To do this there r different methods for different OS of windows but i prefer Windows 7.......... steps r given below:
a . Go to start in Windows
b. Right click on computer and open manage
c. Device Manager will open
d. Now remove the battery of ur bricked phone and connect it to the pc via the USB Cable
e. Just on connecting usb cable hold volume down button and quickly press the power button around 10 times for system to detect
f. Then the MT65XXX divers installation will get started on the system
h. When the installtion get finished unplug the usb cable
i. Now again plug the usb cable without battery on device and u will see aditional port in device manager for 3-5 Sec named as MTXXX preloder blah blah
4. Seting Up YGDP Tool:-
a.As Installed Earlier u will see a YDGP shortcut on deskop
b.If it Stops working then dont panic Just go to application setting and set compatibility to windows 7
c.Now on opening it will ask for password ........type 369 in password and press enter
d.then the application will start
e.Now u will see a Config Icon on the left top ........Open it
f.Now a window will open with devices on left and CPB select on right .......
h.Now on right side select 8297W_I01 for A310 and for A311 select 8297W only !!!1
g.Now on right side browse the CPB file in ur system which u got on unziping the stock ROM
h.Click Apply and the CPB file check will start ........it will take aroung 2-5 Min
i.on completion u will again come on the home page ...
j.Now on the left top side of the application u will see Start icon ......click on it
k.Now connect ur bricked device via usb cable without battery and in power off state
l.Now if everything went correct then the Cell 0 icon will change into downloading icon ......it means ur phone is detected
m.Flashing will automatically start and will take around 5min
n. On completion the Cell 0 will become 100%
o. Unplug usb cable
p. REBBOOT DEVICE!!!!!!
CONGRATES UR DEVICE WILL RISE FROM THE DEAD !!!!! ENJOY !!!!!!!
AND DONT FORGET TO HIT THANKS IF I HELPED
Click to expand...
Click to collapse
Great work... and very nice explanation.... keep goingg....
@moulishankar @sugarmurali
What did u do next after YGDP stuck at 98% for A311?
Andy5.1 said:
@[email protected]
What did u do next after YGDP stuck at 98% for A311?
Click to expand...
Click to collapse
Shut down and close computer thats all
someone please help me....i followed all the above steps but not getting success. The moment i click on Start nothing happens, it just says Entering Download mode and nothing happens. Please help me !!!
+91 9920778298 - Please help me !!!
still stuck on micromax logo after flashing 100%
hi please i have flashed rom via ygdp it shows 100% success but when i boot my a311 it stuck on micromax logo and i have also tried factory mode fix but after commanding ADB Shell it promt no device found.. Plz help me thanks in advance
Bricked micromax canvas a 311
My micromax canvas is not detecting in my system, I have installed all drivers manually. Some time it is stuck in bootloop, some times it get booted to a black screen and shows up setting stopped. But I can boot into recovery mode. Some one please tell me how to flash from memory card. No driver like adb or vcom detects my phone. I tried flash using fastboot mode but it is not detected. Please someone tells me a solution
Hi. I own a Lenovo S850. While trying to update system from the settings, it suddenly turned off and never opened. So I downloaded the Stock rom and flashed it via SP Flash tool. After opening the mobile, it was not like before. SO I downloaded stock rom from another website, connected phone with SP flash tool and formatted from there. It showed ok. Then I clicked download with Da/DL checked. But it couldn't detect the phone. I reattached the USB(It has attached battery), it showed USB connected on Device Manager but SP flash tool couldn't detect. I tried from 3 different PC's.
Duo to 1st post on XDA, they aren't giving me permission to post the link of screenshot. But if you want to see, just remove the space before .com and paste it to browser : i.imgur .com/sj8So7S.jpg
Before formatting the last time, USB VCOM only connects for 2 second, I had to click download and then I needed to attach the phone. But now it doesn't connect for only 2 seconds. It shows the whole time I connect with PC.
I uninstalled every driver with USB deview, reinstalled and updated VCOM driver. But nothing changed.
When I click and hold the power button, nothing comes up on phone, not even the backlight. Tried to enter in recovery mode, nothing shows. What should I do now?
Once you got into android modding, an unrooted phone becomes almost useless.
Now my problem is that I´ve got one.
Couple of days ago my Elephone P9000 arrived from amazon but I can´t connect it to a PC since it says that no device is detected.
Yes, the drivers are installed properly!
I thought that isn´t a problem because there is Kingroot.
Turns out the following rooting apps don´t work for me:
Kingroot (Kingoroot), iRoot, z4root, Framaroot, Towelroot, Oneclickroot, Universal Androot, Root Genius, Baidu
Custom Recovery isn´t installed because, of course, no root.
Now how do I root?
ThisIsMyMaster said:
Once you got into android modding, an unrooted phone becomes almost useless.
Now my problem is that I´ve got one.
Couple of days ago my Elephone P9000 arrived from amazon but I can´t connect it to a PC since it says that no device is detected.
Yes, the drivers are installed properly!
I thought that isn´t a problem because there is Kingroot.
Turns out the following rooting apps don´t work for me:
Kingroot (Kingoroot), iRoot, z4root, Framaroot, Towelroot, Oneclickroot.
Custom Recovery isn´t installed because, of course, no root.
Now how do I root?
Click to expand...
Click to collapse
The first thing you need to accomplish is to get your PC to recognize your phone, rooting from there is going to make life easier, but yes, I know you already know that. If your using windows 10, maybe check this thread out on Elephone Forum:
http://bbs.elephone.hk/forum.php?mod=viewthread&tid=12240&page=1&ordertype=1#pid129322
jotei66 said:
The first thing you need to accomplish is to get your PC to recognize your phone, rooting from there is going to make life easier, but yes, I know you already know that. If your using windows 10, maybe check this thread out on Elephone Forum:
(link removed)]
Click to expand...
Click to collapse
That´s the tutorial that I was going to do but when my phone is shut down, my pc doesn´t detect the device and flash tool neither.:crying:
ThisIsMyMaster said:
That´s the tutorial that I was going to do but when my phone is shut down, my pc doesn´t detect the device and flash tool neither.:crying:
Click to expand...
Click to collapse
Firstly is your PC finding your phone ok with the PC on? If yes.. all good - if no you need to sort this out first.
Then, ensure you have installed the MTK driver on your PC (these are the Media Tek drivers which will find your phone when it is off) instructions here:
https://forum.xda-developers.com/elephone-p9000/how-to/how-to-guideline-install-mtk-drivers-t3344042
Then flashtools should work fine with your phone off.
Just a tip using FlashTools (Im on windows 10 - I dont know if this applies to other windows)
In flashtools, press download first (without phone connected), give it 5 secs and then connect your phone to your PC with the volume up button pressed at the same time. Once you see FlashTools starting to flash your phone, release the volume button. I have to do this all the time in order for my phone to be found on Windows 10.
jotei66 said:
Firstly is your PC finding your phone ok with the PC on? If yes.. all good - if no you need to sort this out first.
Then, ensure you have installed the MTK driver on your PC (these are the Media Tek drivers which will find your phone when it is off) instructions here:
https://forum.xda-developers.com/elephone-p9000/how-to/how-to-guideline-install-mtk-drivers-t3344042
Then flashtools should work fine with your phone off.
Just a tip using FlashTools (Im on windows 10 - I dont know if this applies to other windows)
In flashtools, press download first (without phone connected), give it 5 secs and then connect your phone to your PC with the volume up button pressed at the same time. Once you see FlashTools starting to flash your phone, release the volume button. I have to do this all the time in order for my phone to be found on Windows 10.
Click to expand...
Click to collapse
To start of, I am using Windows 10 as you do.
When I connect my phone when it´s turned on, I get the small icon in the taskbar that allows me to remove the device safely or open devices and printer.
There, my device is put to a section called not specified and it has a small yellow icon.
Only is it called "P9000" which is alright.
Windows explorer acts like no device is connected at all.
When I connect my phone as it is turned off, I still get the notification "USB Device wasn´t recognized." and
windows explorer still doesn´t care as well as the flash tool.
The link you gave me isn´t the one I previously used to install the drivers so I gave it a try.
There are two different ways mentioned in the posts #1 and #4 so I started with the first one.
(Spoiler: Both don´t work for me!)
Everything worked until a step almost at the end where I am told to connect my off-switched phone to the pc.
The tutorial tells me that there should now be a preloader unknown device or something at Device Manager > Ports (COM & LPT) that I would need to proceed further.
I didn´t get that one.
Dead end for me so I went on to the next tutorial in post #4.
In that post I am told to remove a MTK USB Port at Device Manager > Ports (COM & LPT) right after installing the .inf driver files (Yes, I installed the 64 bit version and do have a 64 bit PC).
Ignoring that step didn´t help any of the problems I had before so I got a dead end here, too.
The "Volume-Up-Trick" did help me neither, probably cause of the not working drivers.
ThisIsMyMaster said:
To start of, I am using Windows 10 as you do.
When I connect my phone when it´s turned on, I get the small icon in the taskbar that allows me to remove the device safely or open devices and printer.
There, my device is put to a section called not specified and it has a small yellow icon.
Only is it called "P9000" which is alright.
Windows explorer acts like no device is connected at all.
When I connect my phone as it is turned off, I still get the notification "USB Device wasn´t recognized." and
windows explorer still doesn´t care as well as the flash tool.
The link you gave me isn´t the one I previously used to install the drivers so I gave it a try.
There are two different ways mentioned in the posts #1 and #4 so I started with the first one.
(Spoiler: Both don´t work for me!)
Everything worked until a step almost at the end where I am told to connect my off-switched phone to the pc.
The tutorial tells me that there should now be a preloader unknown device or something at Device Manager > Ports (COM & LPT) that I would need to proceed further.
I didn´t get that one.
Dead end for me so I went on to the next tutorial in post #4.
In that post I am told to remove a MTK USB Port at Device Manager > Ports (COM & LPT) right after installing the .inf driver files (Yes, I installed the 64 bit version and do have a 64 bit PC).
Ignoring that step didn´t help any of the problems I had before so I got a dead end here, too.
The "Volume-Up-Trick" did help me neither, probably cause of the not working drivers.
Click to expand...
Click to collapse
Ok first things first, lets make sure your P9000 is fine with your phone on. You said:
When I connect my phone when it´s turned on, I get the small icon in the taskbar that allows me to remove the device safely or open devices and printer. There, my device is put to a section called not specified and it has a small yellow icon.
Only is it called "P9000" which is alright.
Click to expand...
Click to collapse
(make sure in dev options on your phone USB debugging is ON and USB config is MTP)
So from that you simply need to (In Device Manager) right click > Update Driver Software > Browse My PC for Driver Software > Let me pick from a list of device drivers from my PC > then choose MTP USB Device
Once windows installs this, a box should pop up showing your P9000 internal storage and SD Card (if you have one in phone)
To ensure that your PC is now finding your phone ok, restart PC and plug your phone in - you should be prompted by windows to choose a default action when this device is connected (I choose transfer files or something similar). Then everytime you connect your phone, a box will pop up showing allowing you to access your P9000.
Now onto when your P9000 is switched off... (the important part for flashing etc)
I followed the instructions at post #4 as I believe due to the anniversary update on windows 10 (the January update I believe) .. if you do not have the January update installed on your PC you would use the instructions #1
Don't worry too much if you receive "USB device not recognised" initially, (from what I have understood this is normal with the Anniversary addition of windows 10) it should disappear after few seconds or so. From what I worked out following post #4 you are kinda installing a MTK device (just so you can install the drivers) and then uninstalling that device BUT keeping the drivers installed (its VERY important when you uninstall the device you untick the delete drivers too, otherwise you have essentially deleted the MTK drivers & would have to start from scratch from post #4)
For me, when I connect my p9000 when its off it still shows "USB device not recognised", then after a few seconds this goes away and I dont have any errors under Device Manager > Ports (COM & LPT) & flashtools works fine as long as I press vol up as I connect my phone.
Hope this helps, I had a headache when I tried to install MTK drivers with my windows 10 (Anniversay Update Edition) - good luck, it was kinda trial and error
jotei66 said:
Ok first things first, lets make sure your P9000 is fine with your phone on. You said:
(make sure in dev options on your phone USB debugging is ON and USB config is MTP)
So from that you simply need to (In Device Manager) right click > Update Driver Software > Browse My PC for Driver Software > Let me pick from a list of device drivers from my PC > then choose MTP USB Device
Once windows installs this, a box should pop up showing your P9000 internal storage and SD Card (if you have one in phone)
To ensure that your PC is now finding your phone ok, restart PC and plug your phone in - you should be prompted by windows to choose a default action when this device is connected (I choose transfer files or something similar). Then everytime you connect your phone, a box will pop up showing allowing you to access your P9000.
Now onto when your P9000 is switched off... (the important part for flashing etc)
I followed the instructions at post #4 as I believe due to the anniversary update on windows 10 (the January update I believe) .. if you do not have the January update installed on your PC you would use the instructions #1
Don't worry too much if you receive "USB device not recognised" initially, (from what I have understood this is normal with the Anniversary addition of windows 10) it should disappear after few seconds or so. From what I worked out following post #4 you are kinda installing a MTK device (just so you can install the drivers) and then uninstalling that device BUT keeping the drivers installed (its VERY important when you uninstall the device you untick the delete drivers too, otherwise you have essentially deleted the MTK drivers & would have to start from scratch from post #4)
For me, when I connect my p9000 when its off it still shows "USB device not recognised", then after a few seconds this goes away and I dont have any errors under Device Manager > Ports (COM & LPT) & flashtools works fine as long as I press vol up as I connect my phone.
Hope this helps, I had a headache when I tried to install MTK drivers with my windows 10 (Anniversay Update Edition) - good luck, it was kinda trial and error
Click to expand...
Click to collapse
I am running the Anniversay Update Edition and don´t get an popup window when connecting my phone turned on.
As far is I can tell, a working connection with the device running is more important in the first place.
Now I don´t quite understand your instructions at this point:
jotei66 said:
So from that you simply need to (In Device Manager) right click > Update Driver Software > Browse My PC for Driver Software > Let me pick from a list of device drivers from my PC > then choose MTP USB Device
Click to expand...
Click to collapse
In Device Manager right click, but where?
Blank space? Definetly not.
According to the linked tutorial, I´d have to right click on something like "unknown device" or something similar.
But that doesn´t show up in my list.
In the next section you said:
jotei66 said:
you are kinda installing a MTK device (just so you can install the drivers) and then uninstalling that device BUT keeping the drivers installed
Click to expand...
Click to collapse
I can understand the point but after installing that driver package, there is no MTK device in my device manager that I could uninstall.
I seriously need to thank you for wasting so much time on me:angel:
When you plug your p9000 (while its turned on) into your laptop/pc... in Device Manager, probably under Universal serial Bus Controllers do you see a unknown device, or anything with a question mark / unknown device beside it ? If so, that's where you right click and follow instructions above to get your PC to recognize your handset. At this point just concentrate on getting pc to recognise while its on, then hopefully we can then move to setting up when its off.
I seriously need to thank you for wasting so much time on me
Click to expand...
Click to collapse
lol its all cool
PS: Just to make sure, in device manager, press View from top menu and "show hidden devices".. maybe it could be hidden?
jotei66 said:
When you plug your p9000 (while its turned on) into your laptop/pc... in Device Manager, probably under Universal serial Bus Controllers do you see a unknown device, or anything with a question mark / unknown device beside it ? If so, that's where you right click and follow instructions above to get your PC to recognize your handset. At this point just concentrate on getting pc to recognise while its on, then hopefully we can then move to setting up when its off.
lol its all cool
PS: Just to make sure, in device manager, press View from top menu and "show hidden devices".. maybe it could be hidden?
Click to expand...
Click to collapse
I can´t believe how stupid I am...
jotei66 said:
Just to make sure, in device manager, press View from top menu and "show hidden devices".. maybe it could be hidden?
Click to expand...
Click to collapse
Well, that solved all of my problems...
Almost...
Drivers are fully working for me now so I wanted to flash TWRP with SP Flash Tool to be able to flash the superuser .zip file.
Since drivers work now, flash tool started flashing and gave me the error you can see in the attached screenshot.
Fortunately, my phone isn´t bricked or anything.
Edit: After a couple of reboots of all my devices, I get back to where I was before: USB Device wasn´t recognized and Flash Tool doesn´t do anything.
ThisIsMyMaster said:
I can´t believe how stupid I am...
Well, that solved all of my problems...
Almost...
Drivers are fully working for me now so I wanted to flash TWRP with SP Flash Tool to be able to flash the superuser .zip file.
Since drivers work now, flash tool started flashing and gave me the error you can see in the attached screenshot.
Fortunately, my phone isn´t bricked or anything.
Click to expand...
Click to collapse
All cool & its an easy thing to miss when your not looking for it (or for that matter if you dont know that menu even existed)
That error is a preloading error, I'm assuming your flashing TWRP Recovery and like you I had similar issue - I shared a simple solution here that worked for me here (it should work fine as long as you are on Stock Elephone 2016810 Base onwards so I believe, Elephone changed the preloader or something like that in later ROMS)
So Basically, you download the Stock Elephone 2016810 Base ROM from HERE & unzip
Grab Flash Tools ver v5.1612 (if your not using that version) HERE - https://www.androidfilehost.com/?fid=24591000424940027
Then download TWRP_3.0.2.8.zip HERE & unzip
Copy the the "MT6755_Android_scatter" & "recovery.img" from TWRP_3.0.2.8 folder into the Elephone_P9000_2016810 Rom folder.
In Splash Tools, first flash the Elephone_P9000_2016810 Rom open "MT6755_Android_scatter" from _810 file & ensure the recovery section location points to "recovery.img" in the _810 folder also
Once your stock _810 ROM is flashed successfully, you then flash TWRP (with only recovery ticked) and ensure the recovery location points to "recovery_TWRP_3028_P9000" and your TWRP should flash fine. Make sure your using Flash Tools ver v5.1612, that worked fine for me.
There maybe an easier solution someone can point you too, but I know this worked for me no problems - you should now have TWRP recovery on stock _810 ready for you to flash your chosen ROM
jotei66 said:
All cool & its an easy thing to miss when your not looking for it (or for that matter if you dont know that menu even existed)
That error is a preloading error, I'm assuming your flashing TWRP Recovery and like you I had similar issue - I shared a simple solution here that worked for me here (it should work fine as long as you are on Stock Elephone 2016810 Base onwards so I believe, Elephone changed the preloader or something like that in later ROMS)
So Basically, you download the Stock Elephone 2016810 Base ROM from HERE & unzip
Grab Flash Tools ver v5.1612 (if your not using that version) HERE - https://www.androidfilehost.com/?fid=24591000424940027
Then download TWRP_3.0.2.8.zip HERE & unzip
Copy the the "MT6755_Android_scatter" & "recovery.img" from TWRP_3.0.2.8 folder into the Elephone_P9000_2016810 Rom folder.
In Splash Tools, first flash the Elephone_P9000_2016810 Rom open "MT6755_Android_scatter" from _810 file & ensure the recovery section location points to "recovery.img" in the _810 folder also
Once your stock _810 ROM is flashed successfully, you then flash TWRP (with only recovery ticked) and ensure the recovery location points to "recovery_TWRP_3028_P9000" and your TWRP should flash fine. Make sure your using Flash Tools ver v5.1612, that worked fine for me.
There maybe an easier solution someone can point you too, but I know this worked for me no problems - you should now have TWRP recovery on stock _810 ready for you to flash your chosen ROM
Click to expand...
Click to collapse
I´m going to try this now.
Do I have to go back to Stock 20160810 if I have 20161107?
Do I have to go back to Stock 20160810 if I have 20161107?
Click to expand...
Click to collapse
I guess if you download the 20161107 ROM it should work, I'm really unsure, its a newer ROM so I guess it should
jotei66 said:
I guess if you download the 20161107 ROM it should work, I'm really unsure, its a newer ROM so I guess it should
Click to expand...
Click to collapse
It didn´t work.
I did all the steps you´ve told me and ended up with the exact same problem I´ve experienced before: USB Device not recognized and SP Flash Tool doesn´t do anything after pressing the download button.
I was going to reinstall the drivers like you told me form post #4 here: https://forum.xda-developers.com/elephone-p9000/how-to/how-to-guideline-install-mtk-drivers-t3344042
That didn´t do anything, I still have the same problem of my pc not recognizing my phone.
At least connecting my phone when it´s running works now.
you have to press and keep vol + when connecting the turned off phone to the computer after clicking download in FlashTools.
Regards
Fran Montero said:
you have to press and keep vol + when connecting the turned off phone to the computer after clicking download in FlashTools.
Regards
Click to expand...
Click to collapse
Tried it, didn´t help
ThisIsMyMaster said:
Tried it, didn´t help
Click to expand...
Click to collapse
MMmmm .. have you tried a different USB port? maybe a different lead if you have one? (I have two leads and I know one doesnt work for me, dunno why)
Also, after pressing download in SplashTools.. count to say 7-10 secs and then press Vol UP and connect your phone.... (I know this sounds bit stupid, but it works for me, if I connect straioght away I get errors too ref driver )
jotei66 said:
MMmmm .. have you tried a different USB port? maybe a different lead if you have one? (I have two leads and I know one doesnt work for me, dunno why)
Also, after pressing download in SplashTools.. count to say 7-10 secs and then press Vol UP and connect your phone.... (I know this sounds bit stupid, but it works for me, if I connect straioght away I get errors too ref driver )
Click to expand...
Click to collapse
No, that doesn´t help either.
I think it has to do something with installing the drivers cause after installing them, in Device Manager no new drivers are displayed except for two Mediatek Preloader USB VCOM Port (COM5) and (COM6).
But those only become visible when I check "show hidden devices".
The tutorial said that some more things should have been installed but I didn´t get any error messages so I don´t understand what shouldn´t have worked.
Sorry Im at a loss really, maybe follow this tutorial my brother followed to reinstall the MTK and try again with all the above steps, good luck
https://www.youtube.com/watch?v=NbJCbdfPlF8
Make sure your PC is in driver signature disable mode when flashing etc btw
jotei66 said:
Sorry Im at a loss really, maybe follow this tutorial my brother followed to reinstall the MTK and try again with all the above steps, good luck
https://www.youtube.com/watch?v=NbJCbdfPlF8
Make sure your PC is in driver signature disable mode when flashing etc btw
Click to expand...
Click to collapse
Didn´t help either.
Current state:
Phone On > Everything working, I get the popup window and data transfer works :good:
Phone Off > USB wasn´t recognized, Flash Tool isn´t working, no recognition in windows explorer, phone is charging, vol+ doesn´t help
MTP and USB Debugging are activated
While installing the drivers I got no error messages and everything looked same as in the tutorial
ThisIsMyMaster said:
Didn´t help either.
Current state:
Phone On > Everything working, I get the popup window and data transfer works :good:
Phone Off > USB wasn´t recognized, Flash Tool isn´t working, no recognition in windows explorer, phone is charging, vol+ doesn´t help
MTP and USB Debugging are activated
While installing the drivers I got no error messages and everything looked same as in the tutorial
Click to expand...
Click to collapse
Good to hear you can atleast use your phone to transfer etc while on
Just curious (although Im sure you have followed the video / other tutorials to the letter) but
(1) did you ensure when following video tut that when uninstalling the legacy device you unticked the driver box to ensure the drivers were actually kept installed?
(2) Check Device Manager, under the Ports (COM & LPT) section and remember you shouldn't have anything referring to a MTK device in there - ie like MTK USB Port (Com 3) ? (If you have it needs uninstalling)
(3) Seems obvious I know but you are connecting your phone and using FlashTools when your Windows Driver Enforcement is disabled? ( Literally restarting with advanced options & choosng Disbale Driver Enforcement) Many users think once you have installed the driver you can use it with Windows Drivers enforcement enabled, but you have to be in disabled mode.
Finally if you doubled checked all of those, then maybe try a different version of FlashTools (worth a try) and also try running FlashTools as Administrator when you open it - good luck