Related
has anyone else found this screen and what to do with it, other than the obvious usb tabs. i having trouble with screen shot but if you tap the left bottom corner of the screen, the notifications window will come up, as you push in the usb cable to charge, this will expand and give you the standard usb notfication. if you press this notification, a settings screen will appear, evev after removal of usb cable.
hopefully screen shots will appear.
Wow I had no idea lol
Ok so if you install anycut you can make a direct link to the development settings so no need to play with a usb cable.
That token setting looks interesting but it just closes to home ill have to play with logcat later
anycut gives a lot of very interesting options... but though I made shortcuts I can't see them in any of my launchers. I have Launcher Pro, the Nook standard one and Zeam. No default... i rather like the options.
But some of the options given by Anycut are keyboard settings and CDMA/GPRS/Network settings.
Wow, has anyone tried that on a non-rooted nook?
That's the main difference to Anycut... of course we can get to these settings once we have rooted. But if this screen can be accessed via a standard nook, that hasn't been "nootered", we can just enable adb there. Whether adb then has root access (as with nooter) I don't know, but still it's a new and easier angle at getting access to the device.
I got it to show up this way:
(0. no USB connected)
1. press the left bottom corner ... this will show you the original android notification bar as popup
2. connect USB cable (to PC and device)
3. you usually can't do anything because of the USB-Mode popup, but since the notification bar has focus we can touch the icon that now appears there.
-> remove cable and you are on the screen shown in OP's post.
ixampl said:
Wow, has anyone tried that on a non-rooted nook?
Click to expand...
Click to collapse
I just tried this on my un-rooted nook, and wasn't able to get the screen to appear.
The USB dialog he's referring to should only appear if you're rooted and ADB is enabled.
This potentially means, however, that the rest of the settings aren't actually removed from the nook, just hidden, and that there should be a way to access them somehow.
Ohhhh that would be nice..
tokyomonster said:
The USB dialog he's referring to should only appear if you're rooted and ADB is enabled.
This potentially means, however, that the rest of the settings aren't actually removed from the nook, just hidden, and that there should be a way to access them somehow.
Click to expand...
Click to collapse
Several options will be more functional if you harvest the "extra" apps installed on the nookcolor emulator that ships as part of the SDK.
Also, if you're curious about how to toggle this setting without the UI,
have a look at /data/property/persist.service.mount.umsauto
How do you actually get the card to mount in the future if you disable auto mounting of it?
BertoJG said:
How do you actually get the card to mount in the future if you disable auto mounting of it?
Click to expand...
Click to collapse
see nookdevs
The Nook is the perfect size for a secondary display for a laptop or desktop pc.
This method creates a virtual display that TeamViewer can attach to and control.
I'm going to use TeamViewer (for simplicity's sake) but you can use VNC if you want also. I am making this guide assuming you are using Windows 7.
Software you will need:
Mirage Virtual Display Driver
TeamViewer for PC and Android
PC
Install both Mirage and TeamViewer. If either of them ask for a restart, then restart.
Right-click on your desktop and choose 'Screen Resolution'.
Click the 'Detect' button.
In the 'Display' drop-down list you should see your virtual display as 'Display device on: VGA'. Select that.
Under 'Multiple Displays' drop-down, choose 'Extend desktop to this display' and click 'Apply'
Under the 'Resolution' drop-down, choose 1024x600 and then click 'OK'.
For 'Orientation' choose either 'Landscape' or 'Portrait' to suit your needs.
To setup TeamViewer follow the steps in this PDF.
NOOK
Install TeamViewer on your NC using the standard or easy (drag-drop-open with file manager) methods.
Launch Teamviewer.
Type your pc's ID and password you setup from the PDF and click 'Connect to Partner'.
After a few moments you should establish a connection. If you get a help screen on connection press close.
On the toolbar on the bottom click on the gear icon. (You may have to click towards the top of the icon, at least on my NC that's how it is)
Under 'Session settings' tap the 'Monitor' pulldown and choose 'Monitor 2'. (It was #2 on my setup yours may be different)
Under 'Quality' I left mine on 'Automatic'.
The 'Back' button wasn't working on mine so just tap your Nook's back button.
That should do it. Now you can drag Twitter, Pandora, Winamp to your NC, add some widgets like cpu usage, or whatever.
Notes:
On my setup when I tried to add th NC as my third screen, Windows wouldn't allow it. I'm sure it has to do with my video card or something.
If you want a cleaner picture try 'Optimize quality' under 'Quality'. Likewise, if you want smoother transitions choose 'Optimize Speed'.
This isn't a hack or anything special but I thought some might be interested.
Thanks for sharing this is completely awesome
Thanks. Nice idea. I rebooted but still only have RCA under display.
tunwear said:
Thanks. Nice idea. I rebooted but still only have RCA under display.
Click to expand...
Click to collapse
RCA, I am assuming, is your main display?
Go to device manager and see if you have 'Mirage Driver' under 'Display Adapters'
If it shows up in device manager try clicking "Detect" when you are in the 'Screen Resolution' window.
The Detect button fixed it. Looks good. Thanks again.
I to be mr 20 questions ( ) but I clicked show remote cursor on the settings, but it only updates the cursor when you click the mouse. Anyway to update it in real time? I also have it on optimize speed.
Cute hack, but I can't imagine anyone doing this on purpose.
tunwear said:
The Detect button fixed it. Looks good. Thanks again.
I to be mr 20 questions ( ) but I clicked show remote cursor on the settings, but it only updates the cursor when you click the mouse. Anyway to update it in real time? I also have it on optimize speed.
Click to expand...
Click to collapse
There is an option that sets it to view the remote mouse.
This works well when my laptop isn't plugged into my actual monitor but it never gives me the option to select a third monitor. May be helpful at work though, thanks!
Might give this a try just for fun. What I'm really interested in is the opposite. Getting the nook screen on the pc (or projector).
khaytsus said:
Cute hack, but I can't imagine anyone doing this on purpose.
Click to expand...
Click to collapse
I'd do this on purpose for when I'm not using my NC for other stuff.
I can't get it to show in the drop down box after i hit detect. I'm on Win 7 64bit It is in device manager.
iDisplay now Available for Android
This is a program that is designed to work as a second display instead of being a hack job.
any idea if idisplay (or any other method) will work as a third screen?
Yes, it works with multiple screens.
nikescar said:
iDisplay now Available for Android
This is a program that is designed to work as a second display instead of being a hack job.
Click to expand...
Click to collapse
Cool, thanks for the heads-up.
Tried it out, I'm now using iDisplay as a 3rd monitor and with works great. Thanks!
I've tried this on both my home computer and my work computer. Both run Windows 7 x32. The Mirage Driver shows up under Displays in device manager, but when I click the Detect button, all I see is my primary monitor. Any suggestions?
spadge said:
Tried it out, I'm now using iDisplay as a 3rd monitor and with works great. Thanks!
Click to expand...
Click to collapse
You managed to install it on your nook? I just get "this item is not compatible with your device"
Thanks a lot for posting about this, I tried it and here's a few notes:
-I couldn't get Mirage Virtual Display Driver to really work, it would install but it wouldn't appear when I went to add another display. I ended up not using it at all (see below).
-I was able to add an extra display with my nVidia video card. Basically, I did the following:
--I used the NVIDIA Control Panel to create a 1024x600 60hz custom resolution
--I went to Windows 7's Screen Resolution thing, clicked Detect, clicked on "Another display not detected", clicked "Try to connect anyway on: VGA", clicked Apply, and from there it was simple to choose the 1024x600 resolution and extend my display onto it.
-It was difficult for me to use the other display.
--For one, the refresh rate was quite choppy (even with optimizing for speed enabled), so I would keep overshooting the cursor, moving it back, waiting to see if I was in the right place, and if not, trying to move a bit less in the opposite direction again (sort of like an annoying "Binary Search" hehe).
---I have to wonder if getting the NC to use LAN over USB would improve performance. There's a lot more throughput to be had over USB than WiFi. Any ideas on how to do that?
--For two, and the most annoying part, was that the bottom bar for Teamviewer on my NC took up a lot of screen space. If I maximized a window, I couldn't see the bottom part of it because of the bar.
---I wonder if finding out the exact height of the bar, and subtracting that from the custom resolution, will make a display that floats on top of the bar when viewed in Teamviewer?
For the record, I'm running a rooted NC with the stock rom (no CM7 or anything custom), my PC is running Windows 7 6bit, dunno if any other details matter.
Since this works over WiFi, I'd imagine iDisplay would perform similarly, so I think until they get it to work over USB, I won't buy it (I emailed them a while ago and asked if you established a LAN connection over USB if it would work, and they said no).
Just tried iDisplay and it worked for me, thanks alot!
Don't know how useful it's going to be, but at least it gets bragging rights
Okay so I have a few ideas for ROMS (I know Its a little early but still) In no specific order
1. The ablity to remap the 16 shortcut keys on the keyboard to whatever you want! (kinda like the quick toggle widgets but for the dock keys)
the reason I want this is because I keep pressing the arrow keys while typing and it keeps messing up when im typing! Can we disable these just like you can disable the mouse!
A list of shortcuts I would love to be assigned to the dock!
*All of the stock ones
*A wake function
*Ability to map application shortcuts (Market, browser ect.)
*Mount/Unmount SD card Micro+Full
*Pull up the quick toggle/notification bar! (also add more toggles in that menu)
2. A better dock to tablet charging policy (multiple governs)
3. Hide the on screen home back keys when dock is attached! (kinda like when you watch a full screen youtube video!)
4. Get rid of the SD card notification
5. Switch to a password unlock when the dock is connected (instead of pattern?)
6. Optimize the GPS
7. Disable all of the dock keys
Add any of your other Ideas below and I will add them to the list!
Sent from my Transformer Prime TF201
would this not be best in the android Development forum?
no unless it is a rom or kernal it belongs in the General Check the stickies in the development section
This thread is for you guys to give the DEVS and idea of what you would like!
Sent from my Transformer Prime TF201
ahh makes sense.. I like I like
Not sure if this is possible but i would love (and send donations to) a developer who can get rid of the MTP and allow USB Mass Storage connection with my desktop.
Once we get the botloader unlock/custom recovery I do believe I can accomplish most of these
sent from my Atrix via XDA premium
Another rather specific feature I'd like to have is to deactivate the dock.
Sounds strange?
Well I'd like to deactivate the dock in order to use it only as the perfect stand for Prime. Together with those charging policies that could be kinda useful
Some of these I might be able to do for ya even though the bootloader is still locked, we can still mod this thing.
Sent from my SPH-D710 using Tapatalk
bscotth said:
Not sure if this is possible but i would love (and send donations to) a developer who can get rid of the MTP and allow USB Mass Storage connection with my desktop.
Click to expand...
Click to collapse
this may sound crazy but when I use Elixir2 to check out specs and details of the Prime, it tells me USB Mass Storage is already enabled on it. its a free app.
Oh and something really important: The ability to automatically switch between keyboards when you dock/undock the dock.
I need to use the ASUS software keyboard because of my german dock layout, but I don't want to use ASUS' keyboard when undocked....
one main thing would be re-enabling that developer overclocking mode to allow 1.5 or 1.6ghz overclock. Or even higher. Also since Tegra3 supports 3d display and sound, maybe making a virtual tab to enable it or turn it off and on when you want. Maybe add even more USB host capabilities/drivers. Once windows 8 comes out later this year on tegra3 chipset port it over to the Prime. Dual boot capabilities.
Sounds wonderful viperboy
Sent from my Transformer Prime TF201
demandarin said:
this may sound crazy but when I use Elixir2 to check out specs and details of the Prime, it tells me USB Mass Storage is already enabled on it. its a free app.
Click to expand...
Click to collapse
Thats because the Prime is MTP. Essentially when you plug it in, you see the drives right away on your computer. It is different than phones.
demandarin said:
one main thing would be re-enabling that developer overclocking mode to allow 1.5 or 1.6ghz overclock. Or even higher. Also since Tegra3 supports 3d display and sound, maybe making a virtual tab to enable it or turn it off and on when you want. Maybe add even more USB host capabilities/drivers. Once windows 8 comes out later this year on tegra3 chipset port it over to the Prime. Dual boot capabilities.
Click to expand...
Click to collapse
That's asking alot lol more info on that developer overclock?
Sent from my SPH-D710 using Tapatalk
First in my list is that dev mode overclock (described here http://forum.xda-developers.com/showthread.php?t=1431886). That would be amazing.
Allowing the microsd inerted message to be dismissed after its displayed would also be nice, as I usually leave my card in.
Sent from my SPH-D700 using Tapatalk
-viperboy- said:
Thats because the Prime is MTP. Essentially when you plug it in, you see the drives right away on your computer. It is different than phones.
That's asking alot lol more info on that developer overclock?
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
the link to it is right underneath your post. it was seen that that developers Prime had a mode called developer mode that enabled either 1.5 or 1.6Ghz. The OP of that article went to sine release party n saw it. he posted pix up of it also. The developer there said Tegra3 could easily be overclocked higher than 1 4Ghz. so it can even go higher than the dev. overclock.
Wordlywisewiz said:
Okay so I have a few ideas for ROMS (I know Its a little early but still) In no specific order
1. The ablity to remap the 16 shortcut keys on the keyboard to whatever you want! (kinda like the quick toggle widgets but for the dock keys)
the reason I want this is because I keep pressing the arrow keys while typing and it keeps messing up when im typing! Can we disable these just like you can disable the mouse!
A list of shortcuts I would love to be assigned to the dock!
*All of the stock ones
*A wake function
*Ability to map application shortcuts (Market, browser ect.)
*Mount/Unmount SD card Micro+Full
*Pull up the quick toggle/notification bar! (also add more toggles in that menu)
2. A better dock to tablet charging policy (multiple governs)
3. Hide the on screen home back keys when dock is attached! (kinda like when you watch a full screen youtube video!)
4. Get rid of the SD card notification
5. Switch to a password unlock when the dock is connected (instead of pattern?)
6. Optimize the GPS
7. Disable all of the dock keys
Add any of your other Ideas below and I will add them to the list!
Sent from my Transformer Prime TF201
Click to expand...
Click to collapse
Easily doable, just need kernel support
That may be not configurable
Doable
Never put SD in, so ill check on that hahaha, but any notification is ususal removable
Most likely no-go unless we create a custom app to remove the original lockscreen setting (which only allows one at a time). but it is doable
in the works
I wish I could use light sensor to turn on or off screen
Get rid of the sd card mount icon. It's so easy to hit accidentally.
Any chance of adding a Tun.ko module in the ROMs? I'd really want to use OpenVPN for securing my WiFi connections.
Yeah that pesky icon is so annoying same with the icon when docked!
Sent from my PC36100 using Tapatalk
Hey guys! I recently purchased my galaxy from Telus and I must say it's a lovely device. Just a few cons for me is that it's a bit big and the volume rocker button is pretty loose. Other than that everything is just perfect
I just have a few questions if people could take their spare time to help out
1) How do you disable data usage? I tried pulling down the notification bar but there is no data off/on switch, only wifi.
2) If say I have data and wifi simultaneity on, what will exactly happen? Will wifi take over and automatically shut off the data?
3) Is there a way to automatically stop the use of data by having a restriction set up so for example once I hit 980mb, I won't be able to use the data unless I override and make it possible to continue using it. (Is watchdog a perfect app for this?)
4) The wifi/data icon on the status bar, what does the orange arrow going down mean and the other arrow facing up? The arrow facing downwards for my wifi keeps blinking orange/hang and goes back to grey. (Does it mean there something downloading in the background?)
5) What are some ways to improve the battery life of the phone?
6) Is there a way to remove "ME" on the contact list?
7) When I charge the phone through my laptop, it doesn't heat up but through the wall, the charging brick is rather hot. Is this safe?
8) To open the back cover, do you just put your nail/finger tip through the back hole and just use brute force to rip it off or is there something else? I feel like I'm gonna break the cover or the little edge/dimples on the sides of the cover where it fits into the back :l
9) Is there any way to change the brightness through maybe the status bar (moving fingers from right to left increases brightness and vise versa for left to right?) or maybe through notification bar?
10) Also should I have the sync icon on at all times in the notification bar?
11) Also is samsung kies needed? Whats the benefit of having it?
12) Is Samsung Kies needed?
13) I really appreciate the help guys, and last not but least, what are some useful/"needed/essential" apps to help or make life easier for the phone?
This is my first smartphone as I've been using my old lg chocolate for some time now and it just incredible how diverse the android os is but at the same time confusing and stressful to add what and such. I have so many things I want to do with the phone atm but stressful to figure out what to do in order lol.
I'm planning on rooting the phone after I save the contacts to my google.
Thanks everyone!
A quick note, I would take your phone back to the store and get it replaced, your volume rocker should not be lose. I took mine back for the same reason and my new one is fine.
Sorry I didn't answer anything else but I can't see your post on the app, I will later on my laptop.
Sent from my SAMSUNG-SGH-I747 using xda premium
Gregen11 said:
A quick note, I would take your phone back to the store and get it replaced, your volume rocker should not be lose. I took mine back for the same reason and my new one is fine.
Sorry I didn't answer anything else but I can't see your post on the app, I will later on my laptop.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Okay, thanks!
Intercrew said:
Hey guys! I recently purchased my galaxy from Telus and I must say it's a lovely device. Just a few cons for me is that it's a bit big and the volume rocker button is pretty loose. Other than that everything is just perfect
I just have a few questions if people could take their spare time to help out
1) How do you disable data usage? I tried pulling down the notification bar but there is no data off/on switch, only wifi.
2) If say I have data and wifi simultaneity on, what will exactly happen? Will wifi take over and automatically shut off the data?
3) Is there a way to automatically stop the use of data by having a restriction set up so for example once I hit 980mb, I won't be able to use the data unless I override and make it possible to continue using it. (Is watchdog a perfect app for this?)
4) The wifi/data icon on the status bar, what does the orange arrow going down mean and the other arrow facing up? The arrow facing downwards for my wifi keeps blinking orange/hang and goes back to grey. (Does it mean there something downloading in the background?)
5) What are some ways to improve the battery life of the phone?
6) Is there a way to remove "ME" on the contact list?
7) When I charge the phone through my laptop, it doesn't heat up but through the wall, the charging brick is rather hot. Is this safe?
8) To open the back cover, do you just put your nail/finger tip through the back hole and just use brute force to rip it off or is there something else? I feel like I'm gonna break the cover or the little edge/dimples on the sides of the cover where it fits into the back :l
9) Is there any way to change the brightness through maybe the status bar (moving fingers from right to left increases brightness and vise versa for left to right?) or maybe through notification bar?
10) Also should I have the sync icon on at all times in the notification bar?
11) Also is samsung kies needed? Whats the benefit of having it?
12) Is Samsung Kies needed?
13) I really appreciate the help guys, and last not but least, what are some useful/"needed/essential" apps to help or make life easier for the phone?
This is my first smartphone as I've been using my old lg chocolate for some time now and it just incredible how diverse the android os is but at the same time confusing and stressful to add what and such. I have so many things I want to do with the phone atm but stressful to figure out what to do in order lol.
I'm planning on rooting the phone after I save the contacts to my google.
Thanks everyone!
Click to expand...
Click to collapse
1. Go to Settings > Data Usage > Mobile Data switch should be at the top
2. Wifi takes priority as long as you are within range and connected to a wifi network. If you leave wifi on but there are no networks it will just default to Mobile Data.
3. Again under Settings > Data Usage > Check the "Set mobile data limit" box
4.Yeah when you are downloading or uploading packets of data the corresponding arrows lightup
5. Turn down brightness, data, gps, bluetooth when not in use
6. You can press and hold contact names to bring up a menu and delete that contact. I'm not sure whether it works on yourself I haven't tried it.
7. Should be fine
8. Yeah just pull back gently the cover shouldn't break
9. Custom roms may implement brightness toggles in the notification bar. search around there are probably apps/widgets that can do the same thing as well.
10. Only if you want to sync data. For example if its off but you keep mobile data on, widgets such as weather and facebook won't update until you do it manually, but you can still use the internet normally. This will save some battery life.
11. Are you on a Mac or PC? On a PC you probably don't need it. On a Mac by default your computer won't detect it so using Kies is probably the easiest way to transfer files.
12. See above.
13. If you plan on rooting your phone there are a lot of useful apps such as titanium backup, wifi tether, etc. You can do a lot of customization of the homescreen if you don't like the way it looks check out other "launchers" on the google play store such as Apex launcher or Go launcher. Also there are ton of different keyboard replacements if you don't like the stock keyboard. Popular ones inclue swiftkey and swype. Just go explore
Oh and don't forget the XDA App (Duh)
kthung said:
1. Go to Settings > Data Usage > Mobile Data switch should be at the top
2. Wifi takes priority as long as you are within range and connected to a wifi network. If you leave wifi on but there are no networks it will just default to Mobile Data.
3. Again under Settings > Data Usage > Check the "Set mobile data limit" box
4.Yeah when you are downloading or uploading packets of data the corresponding arrows lightup
5. Turn down brightness, data, gps, bluetooth when not in use
6. You can press and hold contact names to bring up a menu and delete that contact. I'm not sure whether it works on yourself I haven't tried it.
7. Should be fine
8. Yeah just pull back gently the cover shouldn't break
9. Custom roms may implement brightness toggles in the notification bar. search around there are probably apps/widgets that can do the same thing as well.
10. Only if you want to sync data. For example if its off but you keep mobile data on, widgets such as weather and facebook won't update until you do it manually, but you can still use the internet normally. This will save some battery life.
11. Are you on a Mac or PC? On a PC you probably don't need it. On a Mac by default your computer won't detect it so using Kies is probably the easiest way to transfer files.
12. See above.
13. If you plan on rooting your phone there are a lot of useful apps such as titanium backup, wifi tether, etc. You can do a lot of customization of the homescreen if you don't like the way it looks check out other "launchers" on the google play store such as Apex launcher or Go launcher. Also there are ton of different keyboard replacements if you don't like the stock keyboard. Popular ones inclue swiftkey and swype. Just go explore
Oh and don't forget the XDA App (Duh)
Click to expand...
Click to collapse
Thank you so much i'll have to check out the custom roms or the widgets for brightness and I'm not sure if the loose volume button is bad enough that later on it'll popout or something. One thing I notice about it is that if i lay my thumb on it, i can move it from side to side (towards the face and down) and because the button isn't separated into a + -, there seems to be a click sound even though i click the middle of the button. Last note is if I gently tap the volume button you'll hear a light click sound cause it's loose. I just want to make sure if anyone else has this problem or is theres really stiff? The power button and homebutton stay in place but the volume just feels weird , not to mention if you shake the phone you can hear that something is loose (the volume button)
EDIT: I forgot to add two other questions that someone could clarify:
1) I've read other threads about this too but I seem to be only getting one bar of wifi, and it's pretty slow for some reason. But when I go on 4g/lte it's amazingly fast - only problem is I won't be using the data network much. Any fix to this wifi issue? I've done the *#0011# and doesn't help at all.
2) Every time I enter the gallery it seems to detect all my pc connected to my wifi. Any to way to stop this? Because I use to be able to delete photos but now I can' because a computer icon replaced the delete button. Same goes for the music player, on the top left cornor theres a computer icon and if you click on it, it'll show change player
Intercrew said:
Thank you so much i'll have to check out the custom roms or the widgets for brightness
Click to expand...
Click to collapse
Check out this thread:
http://forum.xda-developers.com/showthread.php?t=1748201
El Nivek said:
Check out this thread:
http://forum.xda-developers.com/showthread.php?t=1748201
Click to expand...
Click to collapse
Thanks!
Bump, was wondering if someone could help me out on post 5?
bump again?
Intercrew said:
Thank you so much i'll have to check out the custom roms or the widgets for brightness and I'm not sure if the loose volume button is bad enough that later on it'll popout or something. One thing I notice about it is that if i lay my thumb on it, i can move it from side to side (towards the face and down) and because the button isn't separated into a + -, there seems to be a click sound even though i click the middle of the button. Last note is if I gently tap the volume button you'll hear a light click sound cause it's loose. I just want to make sure if anyone else has this problem or is theres really stiff? The power button and homebutton stay in place but the volume just feels weird , not to mention if you shake the phone you can hear that something is loose (the volume button)
EDIT: I forgot to add two other questions that someone could clarify:
1) I've read other threads about this too but I seem to be only getting one bar of wifi, and it's pretty slow for some reason. But when I go on 4g/lte it's amazingly fast - only problem is I won't be using the data network much. Any fix to this wifi issue? I've done the *#0011# and doesn't help at all.
2) Every time I enter the gallery it seems to detect all my pc connected to my wifi. Any to way to stop this? Because I use to be able to delete photos but now I can' because a computer icon replaced the delete button. Same goes for the music player, on the top left cornor theres a computer icon and if you click on it, it'll show change player
Click to expand...
Click to collapse
1. Depends how far you are from the router and how many walls are in your way. It could also be from interference from a neighbor's router. I would recommend downloading the app Wifi Analyzer. It will tell you which channel your router is on vs. all the other routers around you, and it will tell you the best channel to use (look for the screen with the star ratings) for your router.
2. I haven't used the gallery much, and I use Google Music instead of the stock player. I'll look into the gallery thing, though. Update: OK. So, when you press the Menu button on the main Gallery page, one of the options is to scan for nearby devices. You probably selected it to see what it did, and this is probably why it's showing all the other devices in your house. Wierd thing is, there is no way to disable it. The Gallery app doesn't seem to have a settings menu. What you can try is pressing menu, then View By, then selecting "Content in device". That should show only the things on the phone.
Also, if my volume buttons were making a rattling noise when I shook the phone, I would take the phone back for a replacement, especially if it bothered me. My volume buttons are solid.
EndlessDissent said:
1. Depends how far you are from the router and how many walls are in your way. It could also be from interference from a neighbor's router. I would recommend downloading the app Wifi Analyzer. It will tell you which channel your router is on vs. all the other routers around you, and it will tell you the best channel to use (look for the screen with the star ratings) for your router.
2. I haven't used the gallery much, and I use Google Music instead of the stock player. I'll look into the gallery thing, though. Update: OK. So, when you press the Menu button on the main Gallery page, one of the options is to scan for nearby devices. You probably selected it to see what it did, and this is probably why it's showing all the other devices in your house. Wierd thing is, there is no way to disable it. The Gallery app doesn't seem to have a settings menu. What you can try is pressing menu, then View By, then selecting "Content in device". That should show only the things on the phone.
Also, if my volume buttons were making a rattling noise when I shook the phone, I would take the phone back for a replacement, especially if it bothered me. My volume buttons are solid.
Click to expand...
Click to collapse
Thanks for the help! I wen't back to exchange my phone but it seems all the other phones for display and the ones i exchanged had the same shaky/loose volume. Guess i'll just have to stick with it.
Hi
My Nook has only one small area that no longer accepts input, but that area covers exactly the area where the Next button is during installation of a ROM.
Installation screens don't rotate, they start in landscape mode with the N button to the right.
Is there an alternate way to click Next, maybe a way to activate a voice command? Or maybe a way to force the screen to rotate?
Are my only options to either alter the source code to make the Next buttons show up a bit higher on the screen, or to get my screen replaced?
Thanks for all feedback.
WS
whitespiral said:
Hi
My Nook has only one small area that no longer accepts input, but that area covers exactly the area where the Next button is during installation of a ROM.
Installation screens don't rotate, they start in landscape mode with the N button to the right.
Is there an alternate way to click Next, maybe a way to activate a voice command? Or maybe a way to force the screen to rotate?
Are my only options to either alter the source code to make the Next buttons show up a bit higher on the screen, or to get my screen replaced?
Thanks for all feedback.
WS
Click to expand...
Click to collapse
If you feel like messing around, you could try to use ADB on TWRP to pull your /data/data/com.android.providers.settings/databases/settings.db, edit it with SQL, find the value that means rotation and set it to whatever value seems correct (I can't use touch events. ****ty Touchscreen Firmware Flasher app crashed on me and left me with no driver). Sorry if this is very sketchy, but it's all I know off the top of my head. You could also try out other ROMs (I know some do rotate the setup screen) or use MIUI. Cool, but not very useful. I wish someone with the correct knowledge could make a port and us, the ones who only know the hands-on stuff, could beta-test these things... Very nifty.