I've patched a way so that additional 3Minit batteries can be can be installed on Android 11.
These mods can be found here:
https://github.com/gharrington/3Minit_Battery_Mod
and here:
https://github.com/gharrington/3Minit_Clock_Mod
Explanation as well as a guide for the 3Minit Clock mod is here:
https://forum.xda-developers.com/android/apps-games/3minit-clock-mod-v1-0-t3400221
All the batteries were made by the author's listed below.
You no longer have to flash the minitbatteryresources.apk separately since it is included in the 3Minit zip. The 3MinitBatterySettings.apk and MinitClock.apk are also included where applicable.
If you are using active edge, delete the Active Edge module first.
Flash the 3Minit Battery and/or 3Minit Clock Module
uploaded 10-9-20
3Minit Battery
https://www.androidfilehost.com/?fid=10763459528675558896
3Minit Battery Active edge sense
https://www.androidfilehost.com/?fid=10763459528675558901
3Minit Clock
https://www.androidfilehost.com/?fid=10763459528675558902
3Minit Clock edge sense
https://www.androidfilehost.com/?fid=10763459528675558905
3Minit Battery and Clock
https://www.androidfilehost.com/?fid=10763459528675558898
3Minit Battery and Clock edge sense
https://www.androidfilehost.com/?fid=10763459528675558899
3Minit Battery Center Clock
https://www.androidfilehost.com/?fid=10763459528675558897
3Minit Battery Center Clock Active Edge
https://www.androidfilehost.com/?fid=10763459528675558900
3Minit Battery Right Clock
https://www.androidfilehost.com/?fid=10763459528675558904
3Minit Battery Right Clock Active Edge
https://www.androidfilehost.com/?fid=10763459528675558903
If the default battery or offline batteries are good enough for you, this is as far as you need to go.
I've included a Battery changer zip down below (3minitbatterychanger.zip). Copy the battery pngs files you want from the authors below. Unzip the battery changer zip. Navigate to vrthemeb/data/app/base.apk/res/drawable-xxhdpi-v4 folder and replace the battery pngs that are there. Zip back up and flash.
Batteries by author
Offline
https://www.androidfilehost.com/?fid=4349826312261607292
Colourable
https://www.androidfilehost.com/?fid=4349826312261607287
daxgirl
https://www.androidfilehost.com/?fid=4349826312261607290
nadmaj
https://www.androidfilehost.com/?fid=4349826312261607293
pas2001
https://www.androidfilehost.com/?fid=4349826312261607294
users
https://www.androidfilehost.com/?fid=4349826312261607299
wii360
https://www.androidfilehost.com/?fid=4349826312261607300
XKROME
https://www.androidfilehost.com/?fid=4349826312261607301
Hello, I flashed this and it removed the mods from your other aroma mod installer.... Any way to get both to work?
Thanks!
MrGimpGrumble said:
Hello, I flashed this and it removed the mods from your other aroma mod installer.... Any way to get both to work?
Thanks!
Click to expand...
Click to collapse
Not at this time. I'll include it in my Aroma at a later date.
Tulsadiver said:
Not at this time. I'll include it in my Aroma at a later date.
Click to expand...
Click to collapse
No worries, Thank you!
Will you need files from the new January update to make the Aroma work?
Sent from my Pixel 2 using Tapatalk
Diesel_Jeremiah said:
Will you need files from the new January update to make the Aroma work?
Sent from my Pixel 2 using Tapatalk
Click to expand...
Click to collapse
To be safe, yes. Updates don't usually affect SystemUIGoogle.apk and framework-res.apk but it can.
Hey brother if you include this battery mod in with the aroma installer can you make it where the battery mod only can install and not other mods?
Tulsadiver said:
To be safe, yes. Updates don't usually affect SystemUIGoogle.apk and framework-res.apk but it can.
Click to expand...
Click to collapse
Archangel said:
Hey brother if you include this battery mod in with the aroma installer can you make it where the battery mod only can install and not other mods?
Click to expand...
Click to collapse
Why not just flash this instead?
Yeah I did but I cant remember if in the past you put the battery mod in with an aroma installer and tied it up with a clock mod too? I didnt want to flash any clock mods or any thing else but just the battery mod if you do at some later point put this inside a aroma installer with other mods.
Tulsadiver said:
Why not just flash this instead?
Click to expand...
Click to collapse
Archangel said:
Yeah I did but I cant remember if in the past you put the battery mod in with an aroma installer and tied it up with a clock mod too? I didnt want to flash any clock mods or any thing else but just the battery mod if you do at some later point put this inside a aroma installer with other mods.
Click to expand...
Click to collapse
No clock mods are attached. However, my base is far from stock as it has all the smali's, custom clocks layouts, colors and a lot of other stuff that mostly lies dormant until you flash a mod. If you flash base, then 3 column QS, then 3Minit, you should get a stock look with 3minit battery but still be able to flash most of the other mods if you choose. I have done it this way to modularize my mods as much as possible so a person can pick and choose with as little compromise as possible.
The only things that can't be separated are those wrapped up in the resources.arsc and that is a lot. Everything that is in the values folder is in that one file, bools.xml, attrs.xml, colors.xml, dimens.xml, integers.xml, drawables.xml, styles.xml, ids.xml and a several more.
I gotcha brother and I understand. I just like to use the 3 minit battery mod and thats it. I usually dont want to theme anything else because I can do it with one of my Substratum themes. If you plan on making the aroma and tieing in the battery mod with any QS mods than if you can please pm me how you get the dex systemui for stock 8.1 and I can do the battery mod myself that way I dont clutter your thread with asking whether your going to do just a 3 minit mod by itself. I hope that makes sense LOL.
Tulsadiver said:
No clock mods are attached. However, my base is far from stock as it has all the smali's, custom clocks layouts, colors and a lot of other stuff that mostly lies dormant until you flash a mod. If you flash base, then 3 column QS, then 3Minit, you should get a stock look with 3minit battery but still be able to flash most of the other mods if you choose. I have done it this way to modularize my mods as much as possible so a person can pick and choose with as little compromise as possible.
The only things that can't be separated are those wrapped up in the resources.arsc and that is a lot. Everything that is in the values folder is in that one file, bools.xml, attrs.xml, colors.xml, dimens.xml, integers.xml, drawables.xml, styles.xml, ids.xml and a several more.
Click to expand...
Click to collapse
Archangel said:
I gotcha brother and I understand. I just like to use the 3 minit battery mod and thats it. I usually dont want to theme anything else because I can do it with one of my Substratum themes. If you plan on making the aroma and tieing in the battery mod with any QS mods than if you can please pm me how you get the dex systemui for stock 8.1 and I can do the battery mod myself that way I dont clutter your thread with asking whether your going to do just a 3 minit mod by itself. I hope that makes sense LOL.
Click to expand...
Click to collapse
Not a problem and clutter, you don't. Maintaining a 3Minit thread is a simple task and I'd be happy to do so. It is a popular mod and has been forever.
Thanks brother, I went ahead and flashed this mod for the Jan update as I know they rarely change the systemui and it worked flawlessly.
Tulsadiver said:
Not a problem and clutter, you don't. Maintaining a 3Minit thread is a simple task and I'd be happy to do so. It is a popular mod and has been forever.
Click to expand...
Click to collapse
If someone will upload the framework-res.apk and SystemUIGoogle folder for the January update I'll update this mod.
Tulsadiver said:
If someone will upload the framework-res.apk and SystemUIGoogle folder for the January update I'll update this mod.
Click to expand...
Click to collapse
Here are the files(folders) for Jan 8.1 P2XL; framework-res.apk and SystemUIGoogle folder
https://drive.google.com/drive/folders/1y84SmeYT8yYbvpBcdvC00OmcJLH2CoIR?usp=sharing
an21281 said:
Here are the files(folders) for Jan 8.1 P2XL; framework-res.apk and SystemUIGoogle folder
https://drive.google.com/drive/folders/1y84SmeYT8yYbvpBcdvC00OmcJLH2CoIR?usp=sharing
Click to expand...
Click to collapse
After looking at the Jan 8.1 SystemUIGoogle.vdex file noticed it was exactly the same size as Dec 8.1. So I just used the same Dec 3minit files/install and it is working perfectly...
Can someone please explain how to get back to stock battery? Thanks.
Look for a zip called ozop_restore I think it is called in TWRP and flash that,,,it should put you back to stock.
tmoore3496 said:
Can someone please explain how to get back to stock battery? Thanks.
Click to expand...
Click to collapse
Tulsadiver said:
If someone will upload the framework-res.apk and SystemUIGoogle folder for the January update I'll update this mod.
Click to expand...
Click to collapse
Thank you! Please take not of the post I copied you on with regard to some notification icon colors.
Archangel said:
Look for a zip called ozop_restore I think it is called in TWRP and flash that,,,it should put you back to stock.
Click to expand...
Click to collapse
On your sd card?
Related
Can any one make an update.zip to remove the atrix status bar clock
CHUI2CH said:
Can any one make an update.zip to remove the atrix status bar clock
Click to expand...
Click to collapse
Here ya go, edited the 1.8.3 deodex services.jar... shout out to Tonecreationz for coming up with this MOD, I just made a CWM install for it...
a) You need to be deodex to use this....
b) I also included the services.jar with the 1% MOD(this does not show the percentage in the battery icon) from Gingerblur v3.5 for people using 1% MOD, your framework-res.apk will need to have the correct battery icons for this to point to if you want to see the % in the battery icon... ... I don't use that, so didn't personally install it...
STEP 1: MAKE A BACKUP OF YOUR CURRENT SETUP BEFORE INSTALLING THIS!!
STEP 2: INSTALL VIA CWM
Ty
Sent from my MB860 using XDA Premium App
Nice
Sent from my rooted 1.8.3 Honeyglow themed Gingerblur Atrix
Works.... flashed on top of Gingerblur v3.5
**Edit**
Huummm, battery level seems to be stuck @ 100% now... let me try erasing battery data via CWM
Well, I don't know??? Wiped battery status and dalvik cache with CWM and battery status still shows 100%... Going to restore to the backup I made before flashing this, and confirm that this was indeed the problem.
services.jar is involved in the 1% battery mod, dropping a stock 1.83 services.jar with the clock removed on your phone will affect any mods that utilize services.jar tweaks.
I hate to say it but the best way to implement any mod is to do it yourself - that way you make changes to your current system rather than replacing parts of it.
jimbush3 said:
services.jar is involved in the 1% battery mod, dropping a stock 1.83 services.jar with the clock removed on your phone will affect any mods that utilize services.jar tweaks.
I hate to say it but the best way to implement any mod is to do it yourself - that way you make changes to your current system rather than replacing parts of it.
Click to expand...
Click to collapse
Correct, this is just for the stock status bar...
jimbush3 said:
services.jar is involved in the 1% battery mod, dropping a stock 1.83 services.jar with the clock removed on your phone will affect any mods that utilize services.jar tweaks.
I hate to say it but the best way to implement any mod is to do it yourself - that way you make changes to your current system rather than replacing parts of it.
Click to expand...
Click to collapse
Yeah, I just edited my services.jar from gingerblur... going to flash and give it a try before I post it.
Swiftks said:
Yeah, I just edited my services.jar from gingerblur... going to flash and give it a try before I post it.
Click to expand...
Click to collapse
Added that services.jar as well in my previous post.. so there should be one for stock and one for 1% MOD... I hope..
jpinoy said:
Added that services.jar as well in my previous post.. so there should be one for stock and one for 1% MOD... I hope..
Click to expand...
Click to collapse
dammit you beat me to it... oh well, thx for the help. I'll go post in gingerblur thread too.
Swiftks said:
dammit you beat me to it... oh well, thx for the help. I'll go post in gingerblur thread too.
Click to expand...
Click to collapse
no worries......
jpinoy said:
Added that services.jar as well in my previous post.. so there should be one for stock and one for 1% MOD... I hope..
Click to expand...
Click to collapse
Quick question... Is this the services.jar from Gingerblur? As of right now, gingerblur does not have the percentage numbers shown on the status bar... So, will your services.jar also add the numbers, or did you just use the services.jar file that came with gingerblur (which is what I did)? Guess, I could just flash and see...
Swiftks said:
Quick question... Is this the services.jar from Gingerblur? As of right now, gingerblur does not have the percentage numbers shown on the status bar... So, will your services.jar also add the numbers, or did you just use the services.jar file that came with gingerblur (which is what I did)? Guess, I could just flash and see...
Click to expand...
Click to collapse
Yup, pulled this from gingerblur v3.5, thoutght this was added to v3.5 per change log:
Changelog
Version 3.5:
- Lowered ringer delay (thanks Ririal)
- Re-added Webtop hack for 1.8.3!
- Updated Music application
- Updated Maps application
- Added 1080p recording to camera application (thanks zove)
- 1% battery mod now added (battery gauge more accurately reflects battery)
- Gingerbread fonts verified
- Flash 10.3 added
- Boot animation color corrected
- Bloatware .zip updated for 1.8.3 applications!
jpinoy said:
Yup, pulled this from gingerblur v3.5, if it doesn't, then I would suggest using the one you modded to make it work on yours.. I'll download the 1% MOD for GB v3.5 and replace the one I have now.. thanks for checking!
Click to expand...
Click to collapse
I used the stock gingerblur services.jar too. We are on the same page. The 1% battery mod works just fine under settings and with widgets, etc. But it doesn't show the individual numbers yet in the status bar within the battery icon. I believe I remember Kenn saying that he hadn't implemented this yet.
Swiftks said:
I used the stock gingerblur services.jar too. We are on the same page. The 1% battery mod works just fine under settings and with widgets, etc. But it doesn't show the individual numbers yet in the status bar within the battery icon. I believe I remember Kenn saying that he hadn't implemented this yet.
Click to expand...
Click to collapse
Ah... I just extracted Kenn's battery-mod and it's just the framework-res.apk with all the battery icons with 1% increase, no services.jar in there... so, most likely the services.jar in v3.5 should have the right files, it was just needing the updated framework-res.apk with the icons that included the 1% increase for it to point to... so, it should work, but I don't have gingerblur installed to test it..
Let me know if it works....
Hi,
i have a theme that doesn´t support 1% battery mod and i want to make it support this.
I already put the percentage battery icons in the theme, but it doesnt work.
I think i have to modify a file, but i don´t know which file i have to modify.
Thanks in Advance
deskjeti said:
Hi,
i have a theme that doesn´t support 1% battery mod and i want to make it support this.
I already put the percentage battery icons in the theme, but it doesnt work.
I think i have to modify a file, but i don´t know which file i have to modify.
Thanks in Advance
Click to expand...
Click to collapse
Try replacing these 4 files with the ones from a theme that supports the 1% Battery MOD. I had done something similar, and it had worked for me
All are inside : framework-res\res\drawable
battery_charge_fill.xml
stat_sys_battery.xml
stat_sys_battery_charge.xml
zzz_stat_sys_battery_1.xml
Again, I'm not entirely sure. So, do not hold me responsible if doing this screws up your phone!
Thanks
I´ll try this out
clarkkov said:
Or just take my theme as a base and mod it with your own icons and pngs. You'll get 1% battery, 5 lockscreen and extended battery menu. No need for credits, all yours.
Click to expand...
Click to collapse
Cool, what does that do ?
I have another question
Kyrillos have managed to delete the percent indicator from app downloads in the notification dropdown, i want to do the same because the percent indicator is cutted.
But i don´t know how to do this, can somebody help me ?
Can you also add 1% battery mod to a stock firmware?
Humpie said:
Can you also add 1% battery mod to a stock firmware?
Click to expand...
Click to collapse
It's out there already. Give it a search.
Humpie said:
Can you also add 1% battery mod to a stock firmware?
Click to expand...
Click to collapse
No. Firstly, you need a kernel that supports the 1% Battery Mod. And unfortunately the Stock Kernel does not support this. You will have to flash another Kernel entirely to make this available in your device.
Pwng3 said:
No. Firstly, you need a kernel that supports the 1% Battery Mod. And unfortunately the Stock Kernel does not support this. You will have to flash another Kernel entirely to make this available in your device.
Click to expand...
Click to collapse
There is also Dharam's kernels. G3Mod v1.0.1 is a stock kernel with 1% support.
But I think that OP knows about kernel support, he just want to make a theme that shows 1%.
does anyone know how i can get the stock battery icon to show the percent through flashing or something?
kcamp7890 said:
does anyone know how i can get the stock battery icon to show the percent through flashing or something?
Click to expand...
Click to collapse
You can do it in the UOT kitchen pretty easily. I might just update my thread with one if you're looking for it
I'm currently using it. See attachment (icon files, not a flashable zip). I can make you a flashable zip if you provide me with your framework-res apk.
Here is a flashable zip with the stock gingerbread battery icon and percentage.
CB650 Wolf said:
Here is a flashable zip with the stock gingerbread battery icon and percentage.
Click to expand...
Click to collapse
Thanks, but this also enabled the CRT off. Just wanted to let you and everyone else know that was also included.
I would be happy if you could add a link for a flashable zip for a battery icon for Touchwiz 4.3.
I installed Pheonix rom, and it is great and all, but then I wasn't able to enable battery percentage, and when I tried to the battery icon in the statusbar vanished. I was trying to fix it with Xposed, but it screwed up my UI - that is why I'm asking you for a flashable zip. Thank you.
XerSOn said:
I would be happy if you could add a link for a flashable zip for a battery icon for Touchwiz 4.3.
I installed Pheonix rom, and it is great and all, but then I wasn't able to enable battery percentage, and when I tried to the battery icon in the statusbar vanished. I was trying to fix it with Xposed, but it screwed up my UI - that is why I'm asking you for a flashable zip. Thank you.
Click to expand...
Click to collapse
Mate, you are on phoenix and asking for battery % ?!!!
Go to settings/device/phoenix extra/battery chooser
You'll find a lot of beautiful battery and all are with %
Sent from my GT-N7100 using XDA Premium 4 mobile app
I hope added 4.4.2 battery In next update:silly:
These modules should increase Statusbar Notification Icon Limit to 7
Android 11
Uploaded 9-22-20
Stock
https://www.androidfilehost.com/?fid=8889791610682936045
Active Edge
https://www.androidfilehost.com/?fid=8889791610682942935
----------------------
Android 10
Stock June update
https://www.androidfilehost.com/?fid=4349826312261824907
Stock Active edge June update
https://www.androidfilehost.com/?fid=4349826312261824885
Tulsadiver said:
These modules should increase Statusbar Notification Icon Limit to 7
Stock December update
https://www.androidfilehost.com/?fid=4349826312261681746
Stock Active edge December update
https://www.androidfilehost.com/?fid=4349826312261681739
Click to expand...
Click to collapse
I'm running stock on my 2xl and have a functioning active edge already. What's the stock active edge December update used for?
bsg411 said:
I'm running stock on my 2xl and have a functioning active edge already. What's the stock active edge December update used for?
Click to expand...
Click to collapse
If you want both active edge and this mod you must first remove the active edge module and flash this one instead. I was given permission by the active edge developer to use his mod as a base so people could use both.
Tulsadiver said:
If you want both active edge and this mod you must first remove the active edge module and flash this one instead. I was given permission by the active edge developer to use his mod as a base so people could use both.
Click to expand...
Click to collapse
I didn't have an edge sense magisk module installed. I flashed stock like base and framework then the moreiconswith edge sense and then complete installation zip. But I now get no notifications.
Before I flashed anything I had the clock in the right side mod only. I'm not sure if there is a way to reset these Tulsa mods other than dirty flashing the rom again.
Edit:. Got the icons working after reboot but edge sense still not working
bsg411 said:
I didn't have an edge sense magisk module installed. I flashed stock like base and framework then the moreiconswith edge sense and then complete installation zip. But I now get no notifications.
Before I flashed anything I had the clock in the right side mod only. I'm not sure if there is a way to reset these Tulsa mods other than dirty flashing the rom again.
Edit:. Got the icons working after reboot but edge sense still not working
Click to expand...
Click to collapse
Not sure why you flashed all of that. Remove all your modules of mine, download a new right clock for edge sense, flash ONLY that.
Tulsadiver said:
Not sure why you flashed all of that. Remove all your modules of mine, download a new right clock for edge sense, flash ONLY that.
Click to expand...
Click to collapse
I thought with all the modules you had to flash a base and framework first then the modules then the complete installation module.
Also it is possible to have the right click and the stock icon limit increase module at the same time? Even with the no limit module I don't need the base and framework modules?
bsg411 said:
I thought with all the modules you had to flash a base and framework first then the modules then the complete installation module.
Also it is possible to have the right click and the stock icon limit increase module at the same time? Even with the no limit module I don't need the base and framework modules?
Click to expand...
Click to collapse
Yes, download right clock for active edge. Flash in magisk manager.
https://forum.xda-developers.com/pixel-2-xl/themes/clock-mods-t4015007
Tulsadiver said:
Yes, download right clock for active edge. Flash in magisk manager.
https://forum.xda-developers.com/pixel-2-xl/themes/clock-mods-t4015007
Click to expand...
Click to collapse
That clock mod does put clock on right plus allows increased icons but I still cant get the active edge to work. I even tried deleting all other modules first then the clock mod, but still no active edge.
bsg411 said:
That clock mod does put clock on right plus allows increased icons but I still cant get the active edge to work. I even tried deleting all other modules first then the clock mod, but still no active edge.
Click to expand...
Click to collapse
What did you flash and did you install the active edge app?
Tulsadiver said:
What did you flash and did you install the active edge app?
Click to expand...
Click to collapse
I just have stock with magisk and a custom kernel. I only flashed the right clock with edge mod. no other magisk modules right now or substratum themes either. The squeeze gesture to launch the assistant (which I am calling active edge) no longer works. I can still swipe the from the corner to activate though.
bsg411 said:
I just have stock with magisk and a custom kernel. I only flashed the right clock with edge mod. no other magisk modules right now or substratum themes either. The squeeze gesture to launch the assistant (which I am calling active edge) no longer works. I can still swipe the from the corner to activate though.
Click to expand...
Click to collapse
Please see this thread for active edge mod:
https://forum.xda-developers.com/pixel-2-xl/themes/root-custom-active-edge-actions-edge-t3732383
If you don't want the active edge mod, do not flash the active edge mod.
I got it. I had the edge sense module and app installed originally but removed them because I thought it was built-in to your mods somehow. Guess I got it confused.... Anyway I'm back up and running. Thank you very much for your help.
bsg411 said:
I got it. I had the edge sense module and app installed originally but removed them because I thought it was built-in to your mods somehow. Guess I got it confused.... Anyway I'm back up and running. Thank you very much for your help.
Click to expand...
Click to collapse
No problem! Native edge doesn't work when the Active edge module is installed. You have to use the active edge app.
I didn't notice this mod till now. Nice!
Any chance you'd put together a non-active edge update with the Feb files, or are the files used the exact same?
sharkie405 said:
I didn't notice this mod till now. Nice!
Any chance you'd put together a non-active edge update with the Feb files, or are the files used the exact same?
Click to expand...
Click to collapse
February update in op.
Do you have any other systemui mod installed?
Tulsadiver said:
February update in op.
Do you have any other systemui mod installed?
Click to expand...
Click to collapse
No and yes. I am currently on Colt OS ROM, so that SustemUI is modified for sure. I tried it out any way, and it didn't seem to cause any problems. I'm having SystemUI force closing issues on Colt anyway without and before trying your mod, so after I get some logs for the dev I'll probably switch back to stock, in which case I don't usually install any system UI mods.
And thank you!
sharkie405 said:
No and yes. I am currently on Colt OS ROM, so that SustemUI is modified for sure. I tried it out any way, and it didn't seem to cause any problems. I'm having SystemUI force closing issues on Colt anyway without and before trying your mod, so after I get some logs for the dev I'll probably switch back to stock, in which case I don't usually install any system UI mods.
And thank you!
Click to expand...
Click to collapse
If you are on a custom rom, this will have no affect at all. Custom ROMs have SystemUI, not SystemUIGoogle apk.
June update has been uploaded.
Thank you for pointing me here! It works great for me. (I used the right clock w/ sense as I despise left clock!)
Question: Would there ever be a way to configure the number? Currently you have 7 but with my original pixel 2 xl (I have 2 devices) that is on Oreo...and all androids before...I'm used to no limit/fill the bar. Is there a way to do just that?
DangerIsGo said:
Thank you for pointing me here! It works great for me. (I used the right clock w/ sense as I despise left clock!)
Question: Would there ever be a way to configure the number? Currently you have 7 but with my original pixel 2 xl (I have 2 devices) that is on Oreo...and all androids before...I'm used to no limit/fill the bar. Is there a way to do just that?
Click to expand...
Click to collapse
No, it won't recompile with a number greater than 7