I have two of the Ellipsis 8 Model#QTAQZ3. One of the two is stuck in a boot loop and will not go past the Home screen. I have tried performing a factory reset with no success. The other tablet I have successfully rooted using KINGROOT. The rooted tablet has problems with the power button and works when it wants too. Is it possible for me to download the ROM of the rooted tablet and flash it to the identical mate that is stuck in a boot loop?. If so where can I find some information on performing this task. I have Googled this ROM FLASH numerous times and I have found that many people are looking for this same ROM FLASH and are having the same problem as I am having with the tablet being stuck in a boot loop. If it is possible for me to download the ROM flash from the rooted tablet.....I do not mind posting it for others.!!! Any info. on this subject is greatly appreciated
Thank You
Roy Cason
Related
Hi all. I am new to XDA but have been searching for an answer to my problem all week.
I recently uninstalled Busybox, and the after every reboot it would factory reset. I mucked around with some things and now my tab wont get past boot screen.
i cannot get into fastboot or bootloader. i have tried using Livesuit but the confirmation to format the tablet will not appear. I have tried Uniboot(?) and also Nexus 7 toolkit.
Does anyone know of any other methods that I could use to get my tablet back into working order?
Thanks
Hello everyone,
I got a little issue, i wanted to go back to stock so i flashed via RSD 2.3.6. 4.5.141 and everything went well (as far as the flashing) then at the end the phone got stuck in a loop at the ATT logo and the program stated "this phone needs to be rebooted manually" so i did yet no luck.
I have tried to do a reset and I can access fastboot, but i can't seems to find a logical solution, i have read several threads but no luck. Any help will be greatly appreciated.
Thank you.
EDIT
Never mind a second factory reset did the trick :S
Hi guys, new to the forum, but been reading for a while now.
I need some help with my gf's device which i got messed.. So here is the problem:
Device: Alcatel One Touch S'Pop (4030x)
Carrier: Globul(Bulgarian)
Root: YES
SU Status: Installed SuperSU
Stock firmware: latest ver of Android JB 4030x modded for globul
Recovery: Selfmade CWM.
So the problem is that the device was stock and sim locked by carrier globul, what i was trying to do is root inastall cust recovery and install new rom, hoping that this will debloat the device and eventualy sim unlock it, now i am stuck with a white screen every time i try to boot it, juat after the first boot animation. Tried to go to recovery - work flawlessly. Tried re-installing the custom ROM several times with no luck.. Here is what i done:
Rooted with VRoot, then installed CWM recovery via MTK Droid Root & Tools, all worked fine, the stock (rooted) ROM booted with no problems at all (restarted couple o times)
Then i downloaded to my SD the last version of GE-Rom from MXDevelopers blog and tried to flash it via recovery, following their guide(only difference that i used CWM instead of TWRP) everything went well and nice, then i pressed "Reboot device now" option in the recovery and it rebooted, shown the 1st bootlogo and than that white screen (ofdeath) and it doesn't do anything except when i press volume down and hold it, it vibrates as when you switch silent mode on with the vol keys, also i noticed that the power button works as supposed (locks unlocks).
What i need to do is getting a custom rom working on the device, or at least a stock (non globul) rom working on it..
I tried to flash thru recovery the X9 ROM in hope it will do the job but null... I tried several times to install and re install the rom with no succes so far. What i am thinking is that i somehow damaged the boot image ( i havent touched it but i dont know if the custom rom had tried to modify it. )
Please help!!
Will click the thanks button, i promise
If anything in the given information is unclear, just ask and i will clear it for you, or in case i haven't given enough info on something..
C'mon guys.. Why nobody posting ? I followed the help request guide, i made clear what the problem is and i've given all the information that is avail. ...
I mean.. Please help, any help, advice or whatever will be highly apreciated.. You see, i'm new here but if there is something i can help with - then i will do it.. I know that some devs here do have got that model of alcatel..
I had a very similar problem to yours and
Only resolved it today. Go into XDA and search
Bricked Alcatel 4030. Wergi1 has the solution
Well it worked for me good luck.
Hi All,
I tried to Root my phone after researching the process for a few hours, guess I didn't do enough research!
The phone won't start and the boot menu isn't helping.
I tried Recovery but all I get is lying down android with a red exclamation mark above him, I cant get past that.
The boot up screen I get isn't like the one I saw online when searching for a solution, it doesn't give me any reset options.
I also looked at reinstalling the firmware but that will also involve getting past the current boot screen.
It's a Moto G 3rd Gen
Hope you can help,
Thanks
P.S It's Android 6.0
Yesterday My lenovo Tab 2 A10-70F rebooted for no reason and is now stuck at the lenovo boot logo. What I have tried so far is going into recovery and doing a factory reset and wipe cache. This allows the tablet to boot up and be set up as new. However once the tablet is set up and I reboot again it is back stuck at the lenovo screen until I factory reset it again. I have also tried removing the SD card in case that was causing an issue but still no luck. I did another thing called root integrity check which checked out.
I have never rooted or modified the software in any way. It is bone stock android 6.0 from lenovo
Lenovo tab 2 A10-70f stuck at boot screen- fixed!
mikee286 said:
Yesterday My lenovo Tab 2 A10-70F rebooted for no reason and is now stuck at the lenovo boot logo. What I have tried so far is going into recovery and doing a factory reset and wipe cache. This allows the tablet to boot up and be set up as new. However once the tablet is set up and I reboot again it is back stuck at the lenovo screen until I factory reset it again. I have also tried removing the SD card in case that was causing an issue but still no luck. I did another thing called root integrity check which checked out.
I have never rooted or modified the software in any way. It is bone stock android 6.0 from lenovo
Click to expand...
Click to collapse
Sorry, I know it's an old post.
Hello. Complete noobie here. I've also experienced the stuck at boot screen on my Lenovo TAB 2 A10-70f that I've managed to fix. Firstly, a big thank you to the xda team for providing a wealth of information!
After attempting to use many ROMS provided by links, something wasn't right as the layout and bootscreen was different. The camera didn't work and downloaded videos would not play. The original boot screen was a small rectangular orange box with Lenovo written in it. The ROMS I tried that eventually booted after 8 hours of waiting was in large print, but I digress.
The ROM I installed was a Russian ROM. This is in English and, after an update (took another several hours to complete) is now the original Android 6.0. This is now exactly how it came out of the box. I used the SPFlashTool, unchecked the bootloader option and flashed the ROM. Two updates and all is well. I almost threw the towel in, convinced myself it was a emmc chip issue and started shopping around for a replacement. Glad I didn't.
If i'm allowed to, I'll provide a link to the Russian ROM.