Related
I recently rooted my Eris and I'm unable to flash a custom recovery because I can't get the USB drivers to update with those found in the SDK files. When I try to update the drivers Windows tells me that I have the most up to date drivers installed. It's because of this I cannot see my phone in the command prompt and can't get the custom recovery to work.
Has anyone tried putting the recovery files on their SD and using a terminal emulator?
Any ideas on updating the USB drivers?
If I flashed a custom Rom (as risky as that is without a recovery) could I then use nandroid or some other recovery? Or would I still need to use SDK?
joshw0000 said:
I recently rooted my Eris and I'm unable to flash a custom recovery because I can't get the USB drivers to update with those found in the SDK files. When I try to update the drivers Windows tells me that I have the most up to date drivers installed. It's because of this I cannot see my phone in the command prompt and can't get the custom recovery to work.
Has anyone tried putting the recovery files on their SD and using a terminal emulator?
Any ideas on updating the USB drivers?
If I flashed a custom Rom (as risky as that is without a recovery) could I then use nandroid or some other recovery? Or would I still need to use SDK?
Click to expand...
Click to collapse
download htc sync that should fix ur problem , it did for me
Yes HTC sync updated mine as soon as your phone is acknowledged by HTC sync it should update your usb drivers
FYI HTC sync did NOT work for me on Windows 7. I had to do some pretty annoying stuff to stop windows from installing the regular drivers automatically. If HTC sync doesn't work I can try to help.
If HTC Sync doesn't help, try the following steps.
1. Unplug your Eris from the PC
2. Open Device Manager and delete the Android device
3. Reboot your PC
4. Once in Windows, connect your Eris
5. The drivers should load automatically, if not point it to the SDK drivers folder
Good luck!
Any more ideas
First I tried downloading HTC Sync on my laptop (running Vista) and that didn't do it. Then I deleted the drivers and tried to manually download them back with the ones in the USB folder of SDK and still it wouldn't work.
So I started over and downloaded SDK and Java to my pc (Windows 7) and tried to update the drivers with the ones found in SDK and it wouldn't let me. So I deleted the drivers, unplugged my phone, and plugged it back up. Before I could attempt to direct it to download the intended USB drivers, Windows 7 had already updated with the drivers of it's choice. I can't win for losing.
If you don't mind using one of those "Live" Linux CDs, you could install the recovery using fastboot.
No need to install anything on the PC, and no drivers are needed for Linux, no SDK, no Java, no adb; just make sure to run fastboot as root.
The downloads of fastboot and the Amon_RA recovery are small, so they will easily fit in /tmp.
bftb0
I've never used Linux but I'm willing to try. Please tell me more. Are there "how tos" for this?
When you have your phone plugges in do you have it set to "charge" or "sync"? I know all the how to's say yo have it set to charge only but the inly way my computer ever finds my phone is if it us set to sync.
-------------------------------------
Sent via the XDA Tapatalk App
I set it to charge. I was finally able to install the correct driver. I selected a Google driver from the list it gave me (which my computer did not like) then went back and updated the drivers with those found in the tools usb folder of SDK. IT FINALLY LET ME!
Now I have a new problem. I'm using the command prompt and trying to create a custom recovery. I set it to the tools directory in SDK (where the flash and recovery images are) and I'm entering the commands exactly like the "how to" instructions have them. I keep getting "adb: not found" errors.
Can anyone tell me what I'm doing wrong?
joshw0000 said:
I've never used Linux but I'm willing to try. Please tell me more. Are there "how tos" for this?
Click to expand...
Click to collapse
Well, in the long run it is probably a good idea to resolve the driver install problems you are having on your PC, because it is very useful to have "adb" around, even if you are already rooted and have the ROM of your choice installed.
But, if you would like to do this, here's an outline below. Note that the point of the "Live" CDs is that you are not installing Linux on your machine, you are just booting it directly from the CD - the OS and hard drive on your PC are untouched.
1) Download an ".iso" file from your favorite Linux distro [ 3 ] for their "live" CD. (BIG download, usually 600+ MB)
2) Burn the .iso file to a CD as a bootable CD. (Most decent CD/DVD burner programs know what an .ISO file is, but might refer to them as a disk image).
3) Boot your PC off it! (You might need to hit a key on your PC right after you power it on to go into a boot menu, or the BIOS setup to change the boot order so your PC will try to boot from the CD/DVD before it tries the hard drive).
4) Copy the fastboot [ 1 ] executable for Linux and the Amon_RA recovery image [ 2 ] to /tmp "somehow" - you could just download it using the Linux browser if your network come up automatically (wired ethernet), or you could put them onto a USB key beforehand, and plug that in after Linux has booted; it should mount automatically.
5) Then, open up a terminal window and become root. (Type either "su" or "sudo /bin/bash" - depends on the Linux distro)
6) Attach your (well-charged) phone to the phone via USB, and power it up in fastboot mode (Send+End simultaneously)
cd /tmp
chmod 755 fastboot
md5sum recovery.img (check file sig)
./fastboot devices (check to see you are connected)
./fastboot flash recovery recovery.img
Obviously, if you need to look something up on the internet, it is useful to be networked, so you can use a web browser. The Linux boot will try to autoconfigure network interfaces automatically, but this is going to be most straightforward with a wired connection (Ethernet). Alternatively, if you have another PC or laptop nearby, you could use that.
Good luck.
Edits:
[ 1 ] Find Linux version of fastboot from HTC midway down this page - md5sum 9851bb6ad29cd4b60c9ba9d011ba9efd
[ 2 ] Amon_RA's recovery is located on this XDA page - md5sum e3932991f097993602af3c7a4b61a4f8
[ 3 ] Ubuntu's Current (x32) CD for v10.04 this page
NOTE: This CD is both a "Live" CD and an Install CD. You DO NOT WANT TO INSTALL ANYTHING; you are using the "Live" CD function - see the "show me how" link under Item #3 ("Try It!") on the above linked page
[ 4 ] Various OpenSuSe 11.2 Live CDs
Thanks for the info. I was able to get my drivers installed and run a nandroid recovery. Then I think I bricked my phone:
I just ran a nandroid backup for my Eris which was at stock 2.1 w/ root. I first partitioned the sd to swap - 3072 MB, ext2 swap 3072 MB, and fat32 - remainder. Realizing this was stupid, I went back and changed the partition to swap - 0, ext2 - 512 MB, fat32 - remainder 7680 MB or 7.5 GB. I moved ext2 to ext3 and booted the phone. All my sd was cleared so I copied everything back on (I saved all sd contents to my computer prior to this). I went back to recovery and flashed Eris Lightning 3.02. Everything went successful and when it rebooted, I saw the droid guys, then the "quietly brilliant", then "Verizon" screens. It then began running the "quietly brilliant" and "verizon" screens over and over. I pulled the battery and powered up again but it's still running those two screens over and over. I booted into recovery and attached my phone to the computer. I opened command prompt, entered " sd C:\android-sdk-windows\tools" and then entered "adb devices". It reads "List of devices attached" but there are none. I attempted to add the driver back to my device but when I go to device manager and click "update driver" and point it to the tools directory in SDK, it says that "Windows could not find driver software for your device".
If I can't communicate with my phone via usb and it wont boot, how can I get it to recover?
Any suggestions would help, I'm scratching my head here. I really don't want to have to buy another phone.
joshw0000 said:
Thanks for the info. I was able to get my drivers installed and run a nandroid recovery. Then I think I bricked my phone:
I just ran a nandroid backup for my Eris which was at stock 2.1 w/ root. I first partitioned the sd to swap - 3072 MB, ext2 swap 3072 MB, and fat32 - remainder. Realizing this was stupid, I went back and changed the partition to swap - 0, ext2 - 512 MB, fat32 - remainder 7680 MB or 7.5 GB. I moved ext2 to ext3 and booted the phone. All my sd was cleared so I copied everything back on (I saved all sd contents to my computer prior to this). I went back to recovery and flashed Eris Lightning 3.02. Everything went successful and when it rebooted, I saw the droid guys, then the "quietly brilliant", then "Verizon" screens. It then began running the "quietly brilliant" and "verizon" screens over and over. I pulled the battery and powered up again but it's still running those two screens over and over. I booted into recovery and attached my phone to the computer. I opened command prompt, entered " sd C:\android-sdk-windows\tools" and then entered "adb devices". It reads "List of devices attached" but there are none. I attempted to add the driver back to my device but when I go to device manager and click "update driver" and point it to the tools directory in SDK, it says that "Windows could not find driver software for your device".
If I can't communicate with my phone via usb and it wont boot, how can I get it to recover?
Any suggestions would help, I'm scratching my head here. I really don't want to have to buy another phone.
Click to expand...
Click to collapse
First, relax and take a deep breath; everything's going to be fine.
In the recovery main menu, there is an Item called something like "MS-USB toggle" or something like that. It does not use the adb driver, it uses a standard "Mass Storage Device" USB driver already on the PC. The purpose of this function is to make the SD Card mount on the PC when the Amon_RA recovery is running.
Try that - it should work.
Then, download a conservative ROM such as Ivanmmj's Official 1.0 alpha, or Jcase's "Plain Jane", and copy it to your SD card.
After you have done that, make sure to check the MD5 sum of that .zip file on the SD card. (You should be doing this already).
Then, cleanly dismount the USB drive from the PC with the "Safely Remove Hardware" thingamabob, and toggle "off" the MS-USB toggle on the phone. Return to the main menu, wipe /data, and then flash the "conservative" ROM.
Then boot the conservative ROM just to verify everything is OK.
Next, Backup anything from the SD card that you don't already have (this step might be optional), and boot into recovery, and unpartition your SD card so that the only thing that is there is the VFAT partition.
For the moment, I'll give you some advice: f*ck A2SD. You need to gain some familarity with how the various versions of a2sd work before you start using it..
Very likely you were just stuck in a boot loop created by the re-partitioning you performed after initial configuration of a ROM that uses a2sd. Frankly, it is easy to create conditions for this, especially if you switch between ROMs that use different versions of a2sd, and/or don't understand that certain versions are not correctly backed up with Nandroid at the moment (e.g CLB).
bftb0
Go in to the start menu of your computer or laptop right click on computer and go down to properties and open it up look to the right and you will see something that says advanced system settings click that and it will open up another window for system properties.. Okay look at the bottom of that small window you will see something that says environmental variables, click that. Now you want to scroll through the system variables and find the one that says "path" you want to change that to you ";C:\android-sdk-windows\tools" and save it.. That is where your adb file or app is in your sdk tools folder, so when you open up a command prompt type in adb devices it may say something about killing daemon starting successful.. Don't worry just type it in again you should get your phones serial number thats when you know your good and you can start talking to your phone.. You can try a simple command like adb reboot and it will reboot your phone.. All else fails and you do this and your phone is responding but you can get anything to run in the command prompt type with 1 space cd then another space and then copy and paste "C:\android-sdk-windows\tools" that.. So it will look something like this
cd C:\android-sdk-windows\tools.. That should def do the trick.. Or absolute worst case scenario and you want to make it real easy and not have the fun of doing all the hard but fun work just use the "all in one root script" it will root your phone and it will also install "amon RA recoveryv1.6.2"... Hope this helps you out. LoL I know its long but yo dude I went through the same hell and I finally got everything where I want it!!!!!! Also make sure your HBOOT is under 1.49, if you have 1.49 you cant root... For example 1.46 your good...
Go in to the start menu of your computer or laptop right click on computer and go down to properties and open it up look to the right and you will see something that says advanced system settings click that and it will open up another window for system properties.. Okay look at the bottom of that small window you will see something that says environmental variables, click that. Now you want to scroll through the system variables and find the one that says "path" you want to change that to you ";C:\android-sdk-windows\tools" and save it.. That is where your adb file or app is in your sdk tools folder, so when you open up a command prompt type in adb devices it may say something about killing daemon starting successful.. Don't worry just type it in again you should get your phones serial number thats when you know your good and you can start talking to your phone.. You can try a simple command like adb reboot and it will reboot your phone.. All else fails and you do this and your phone is responding but you can get anything to run in the command prompt type with 1 space cd then another space and then copy and paste "C:\android-sdk-windows\tools" that.. So it will look something like this
cd C:\android-sdk-windows\tools.. That should def do the trick.. Or absolute worst case scenario and you want to make it real easy and not have the fun of doing all the hard but fun work just use the "all in one root script" it will root your phone and it will also install "amon RA recoveryv1.6.2"... Hope this helps you out. LoL I know its long but yo dude I went through the same hell and I finally got everything where I want it!!!!!! Also make sure your HBOOT is under 1.49, if you have 1.49 you cant root... For example 1.46 your good...
NEXUS 4 - SUPPORTS ALL VERSIONS UP TO LATEST ANDROID 5.1.1 BUILDS
SEE SUPPORT LIST FOR PUBLIC/PRO VERSIONS *HERE*
The Unified Android Toolkit brings together all the Nexus and Samsung Toolkits and supports many Nexus and Samsung devices. There is also an option at startup to run a Basic Android Toolkit which any Android device can use to install drivers, make app backups, install apk files, reboot the device into different modes and run a command prompt for manual input.
FUNCTIONS OF UNIFIED ANDROID TOOLKIT V1.4.1 [05th Oct 2015]
* Install correct adb/fastboot drivers automatically on Windows xp/vista/7/8 32bit+64bit
* Backup/Restore a single package or all apps, user data and Internal Storage
* Backup your data from selectable folders [internal or external storage] to your PC for a Full Safe backup of data
* Unlock/Re-Lock your Bootloader [Nexus]
* Root Stock builds
* Various Root options using insecure boot image or custom recovery
* ALLINONE to Unlock, Root, Rename the Restore Files and install busybox [Nexus]
* ALLINONE to flash custom Recovery Root, Rename the Restore Files and install busybox [Samsung]
* [NEW] use SkipRoot boot image to Auto Root device, install Busybox Binaries and rename Recovery Restore files [selected devices]
* Install BusyBox on your device
* Perform a FULL NANDROID Backup of your system (Boot, Cache, Data, Recovery and System) via adb and save in Custom Recovery format on your PC which can be Restored via CWM Recovery [if insecure boot image available]
* Fix extSdCard write permissions from installed apps in Android 4.4+ [Samsung]
* Pull /data and /system folders, compress to a .tar file and save to your PC [if insecure boot image available]
* Dump selected Device Partitions, compress to a .zip file with md5 and save to your PC [if insecure boot image available]
* Extras, Tips and Tricks section
* Auto Update ToolKit to latest available version at startup (professional only feature)
* Program up to 10 Quickpick slots and run them very quickly (professional only feature)
* Mods section to automatically perform certain tasks on your device
* Download Google Stock Image directly to correct ToolKit folder for extracting and flashing [Nexus]
* Check md5 of stock image to make sure downloaded file isn’t corrupted before flashing [Nexus]
* Download Samsung Stock Firmware to PC for extracting and flashing via Odin [Samsung]
* Flash Custom Recovery or Google Stock Image to Device
* Flash any part of a stock Nexus image to device [boot, system, recovery] – Great for fixing broken parts of firmware
* Rename the Recovery Restore File present on some Stock Roms
* Boot into CWM Touch, TWRP, Philz Touch Recovery or Stock Recovery without Flashing it [Nexus]
* Flash Custom Recovery to Device
* Boot [Nexus] or Flash .img Files directly from your PC
* Install a single apk or multiple apk’s to your device
* Push Files from your PC to your device
* Pull Files from your device to your PC
* Disable forced encryption on Nexus6 and Nexus9 devices
* Install Root Checker app by Burrows Apps
* Install Backup/Restore app by MDroid Apps [calls log, sms, contacts]
* Install EFS/Partition Backup/Restore app by Wanam
* Dump selected LogCat buffers to your PC
* Dump BugReport to your PC
* Set Files Permissions on your device
* Open new Command Prompt for manual input
* Reboot device to Fastboot Mode or Android from fastboot mode [Nexus]
* Reboot device to Fastboot Mode [Nexus], Recovery, Android or Download Mode [Samsung] from adb mode
* Display Important Information about your device
--------------------------------------------------------------
SUPPORTED DEVICES AND LATEST SUPPORTED BUILDS *HERE*
DOWNLOAD THE SKIPSOFT UNIFIED ANDROID TOOLKIT *HERE* (FROM SKIPSOFT.NET)
NOTE: Key files are signed with a Digital Certificate from skipsoft.net but some ‘may’ get picked up as potentially harmful by Antivirus Programs and deleted. They are not harmful, this is a false positive given because of the compiler used. If this happens restore the file and exclude the folder from future scans to use it. This seems to happen mostly on AVG Free and Norton. If you are using the Auto Update feature on pro versions then you will need to disable the AV program or exclude the folder from scans before running the update again.
Credits: ChainsDD for Superuser, Chainfire for SuperSU, koush and the clockworkmod team for cwm and the universal driver pack, 1wayjonny for the adb/fastboot driver pack, Adam Lange for all his support and help with the insecure kernels, Viperboy for the Knox Disabler app, Stephen Erickson for the BusyBox installer app, BurrowsApps for the Root Checker app, NextApp for the SD Fix app, fOmey for TWRP for the Galaxy Gear.
--------------------------------------------------------------
WHAT IS THE DIFFERENCE BETWEEN PUBLIC (FREE) AND PROFESSIONAL (DONATE) VERSIONS?
THE PUBLIC VERSION OF THE TOOLKIT INCLUDES EVERYTHING YOU COULD NEED TO MANIPULATE AND ROOT YOUR DEVICE.
ACTIVATING THE PROFESSIONAL VERSION ADDS THE MOST USEFUL FUNCTION IN THE TOOLKIT, THE ABILITY TO CHECK FOR ‘AUTO UPDATES’ DIRECTLY VIA THE TOOLKIT AND HAVE THEM PUSHED TO YOUR PC RIGHT AWAY AS SOON AS THEY ARE UPLOADED WITHOUT NEEDING TO DOWNLOAD THE WHOLE TOOLKIT EVERY TIME. YOU WILL ALWAYS HAVE THE LATEST VERSION AS SOON AS IT IS MADE AVAILABLE. THIS MEANS SMALLER UPDATES CAN BE SENT OUT MORE FREQUENTLY, SUCH AS ADDING A SINGLE FUNCTION, FIXING A BUG OR ADDING COMPATIBILITY FOR A SINGLE CARRIER. THE SMALLER UPDATES WILL BE COMPILED AND RELEASED TO THE XDA COMMUNITY AS A FULL (PUBLIC) DOWNLOAD VERSION SO PROFESSIONAL VERSIONS ARE ALWAYS UPDATED SOONER.
THE PRO VERSION ALSO ADDS THE ABILITY TO CHECK FOR THE LATEST VERSION OF SUPERUSER AND RECOVERY FILES AND DOWNLOAD THEM DIRECTLY TO THE TOOLKIT.
THE ‘QUICK PICKS’ SECTION[/B] ALLOWS YOU TO PROGRAM UPTO 10 SLOTS WITH TASKS THAT YOU MAY PERFORM ON A REGULAR BASIS OR JUST WANT TO KEEP A SET OF TASKS IN 1 PLACE. THEN JUST SELECT THE SLOT AND IT WILL REMEMBER ALL YOUR SETTINGS FOR THAT TASK AND RUN IT.
PRO USERS CAN ALSO SELECT THE “ANY BUILD” OPTION IN THE BUILD SELECTION SCREEN TO ROOT ANY BUILD AS LONG AS THE VERSION IS SUPPORTED (USEFUL IF YOUR BUILD IS NOT LISTED).
MORE IMPORTANTLY DONATING SHOWS YOUR APPRECIATION AND ALLOWS THE TOOLKIT TO CONTINUE TO EVOLVE AND GROW.
AUTO REPLY LINKS FOR PAYPAL TO GET A CODE INSTANTLY CAN BE FOUND AT http://goo.gl/nyGqv
--------------------------------------------------------------
PLEASE READ THE *HELP* PAGE AT http://www.skipsoft.net/?page_id=1269 OR USE THE INFORMATION SECTION WITHIN THE TOOLKIT IF YOU HAVE ANY QUESTIONS. I HAVE TAKEN A LOT OF TIME TO WRITE IT AND SOMETHING ON THERE SHOULD ANSWER 99% OF PROBLEMS.
--------------------------------------------------------------
1. INSTALLING ADB/FASTBOOT DRIVERS
The first thing you need to do is to install the adb/fastboot drivers. These are needed so that you can unlock your bootloader, root your device and perform other adb/fastboot functions.
THE DRIVERS CAN BE INSTALLED DIRECTLY VIA THE TOOLKIT. OPTION 1 IN THE MAIN MENU.
If drivers are not installed or there is an exclamation mark next to the device:
Plug the device in to a usb cable directly connected to your motherboard.
In the Device Manager a new item, usually called Android 1.0 should pop up in the list.
Right click on the device item then left click on Update Driver Software. Select 'browse my computer' and then 'Let me pick from a list'.
If no adb interface driver appears in the list then untick 'Show compatible hardware' and find the Android or Samsung adb interface driver.
If you cannot find either of these click Have Disk, browse to the Toolkit install folder, drivers folder, click on android_winusb.inf and click Open.
Click OK and select Google ADB Interface.
Make sure you have USB debugging enabled in settings, developer options. In Android 4.2.2 or later you have to enable the developer options screen by going to settings, About on your device and click on Build number at the bottom 7 times until it says You are now a developer. If you have already enabled usb debugging then unplug/replug the usb cable.
On Android 4.2.2 or later when you replug the usb cable after enabling usb debugging for the first time you will get a popup asking you to authenticate your pc. Tick 'Always allow' then click 'ok'.
--------------------------------------------------------------
2. USING SKIPSOFT UNIFIED ANDROID TOOLKIT
When starting the Toolkit you will first be asked which device you want to work with. Working folders will be created and the device files downloaded. You will then be taken to the Model/Build selection screen where you can do a number of things (other than select your model/build): Type '00' to enter your activation code and enable pro features, 'i' will take you to the Information and Help Section, 'a' will give you information on how to add support for a new build.
Supported builds are listed in the Model/Build selection screen and typing the associated number (i.e. 11) will download needed boot and recovery files (stock and custom recovery) then check for and download the latest superuser files available and custom recovery (pro versions only), verify all the files and start the Main Menu. You can now use all the functions and tools the Android Toolkit offers. Pro users can select the "any build" option to root any build (useful if your build is not listed).
--------------------------------------------------------------
ChangeLog:
ToolKit v1.4.1 (05th Oct 2015)
+Added new upcoming devices to device selection screen
+Main files now signed with Digital Certificate to ensure files are original and safe
+Added file checker after device selection to check needed files are up to date
+Updated UniversalAdbInstaller for Windows 10 compatability
+Added driver installation option at startup for new installs
+Updated ToolKitClean.exe to allow users to update the main ToolKit.exe file to latest available version without having to download/install the whole ToolKit again (like when a new device is added or files/drivers updated)
+Improvements and minor bug fixes
+Installer now give option for Fresh Install (removes any existing device files) or Upgrade (to just update base files)
--------------------------------------------------------------
USEFUL INFORMATION
How to get into your FastBoot Mode
1. Turn your phone off
2. Unplug your usb cable if you have one plugged in
3. Keep holding the 'Volume Down' and 'Power' buttons to boot the phone into FastBoot Mode
How to get into Recovery
1. First boot into FastBoot Mode as described above
2. Scroll down with the 'Volume Down' button until it says 'Recovery mode' at the top and press the 'Power' button to enter Recovery
Show the Menu in the Stock Recovery Screen
1. Hold the Power button and keep holding as you press the Volume Up button quickly. The blue recovery menu screen should pop up.
--------------------------------------------------------------
*DISCLAIMER*
I take no responsibility for any fault or damage caused by any procedures within this guide. No warranties of any kind are given.
Google Nexus 4 Frequently Asked Questions
UPDATES:
Frequently Asked Questions:
Q. What is ADB Shell?
Adb shell is a linux command line tool (because android is based on linux) used to send commands to your android device. For S-ON devices, this is crucial for modifying files in the /system partition (where the rom sits) as you cannot modify anything in /system when the rom is running without S-OFF (e.g removing system apps).
From Google:
Android Debug Bridge (adb) is a versatile tool lets you manage the state of an emulator instance or Android-powered device. It is a client-server program that includes three components:
A client, which runs on your development machine. You can invoke a client from a shell by issuing an adb command. Other Android tools such as the ADT plugin and DDMS also create adb clients.
A server, which runs as a background process on your development machine. The server manages communication between the client and the adb daemon running on an emulator or device.
A daemon, which runs as a background process on each emulator or device instance.
----------------------------------------------------------------------------
Q. What is FASTBOOT?
Fastboot is 2 things. It is a mode on the phone, which looks a little like Bootloader. You can access it by holding 'Volume Up' and 'Volume Down' whilst turning on the phone.
It is also a way of flashing radios, recovery, boot images and system images in a command line method from a PC much like adb.
----------------------------------------------------------------------------
Q. I flashed CWM but each time I reboot the Stock Recovery is back
There is an auto recovery restore system on certain Stock Android Builds that will reflash the Stock Recovery if you flash CWM on a Stock Rom.
Use Root Explorer to Mount the system folder as R/W (or use a free app from Google Play such as ES File Explorer). Rename the files /system/recovery-from-boot.p and /system/etc/install-recovery.sh. Now when you flash CWM Recovery it will NOT be overwritten after a reboot.
OR you can use the ToolKit to rename the files (root access needed).
----------------------------------------------------------------------------
Q. I want to send my phone back so I need to flash a stock rom and relock the bootloader
1. Download, install and run the Google Nexus 4 Toolkit.
2. Install adb/fastboot drivers (if you havent already done so)
3. Option 9 to download a Google Factory Image.
4. After it finishes downloading you will be given the option to flash the image to your tablet. Do this.
4. Let the phone reboot, then shut the device down and reenter fastboot mode (or boot to fastboot mode via the Reboot Screen in the ToolKit).
5. Option3, 2 to relock the bootloader.
Your internal storage will be formatted and data and cache wiped. Your tablet will now be back to an out-of-the-box FULLY STOCK state and ready to send back.
----------------------------------------------------------------------------
Q. What is the difference between Nandroid and Titanium backup?
A NANDROID will backup the whole system including boot, system, data and recovery partitions so you can restore a complete rom and all data and settings.
Essentially Titanium Backup is used to backup apps and associated user data. These could be restored AFTER a full wipe and a new Rom had been flashed on your phone.
The other option now which google added into the new adb command list is the adb backup which is in the ToolKit and can do the same job as Titanium Backup but will store the data on your PC rather than on the phone (where it takes up space and could be deleted).
----------------------------------------------------------------------------
Q. When I try to open the ToolKit I get a box pop up for a split second and then it goes away. My AntiVirus program says the file may be harmful.
The exe files I compiled are not digitally signed with a Microsoft certificate (as they cost money) so certain AntiVirus programs (mainly Norton) will pick it up as potentially harmful when it is not. They will pick up ANY file that doesnt contain a purchased Microsoft certificate in the same way. Restore the deleted file and exclude it from further scans and it will be fine.
----------------------------------------------------------------------------
Q. The ToolKit recognises my tablet in adb mode but not in fastboot mode (or other way round).
Open the Device Manager on your pc and then boot your tablet into fastboot mode or adb mode (dont plug the usb cable in yet). Make sure USB debugging is enabled on your tablet in settings, developer options. Plug the cable in while watching the Device Manager and determine which item is added to the list with the device plugged in. Once you have found it right click on the item and select update driver. Select 'browse my computer' from the list and then browse to the 'drivers' folder in the ToolKit folder (wherever you installed the ToolKit to). Make sure sub folders is ticked and click next. Hopefully the driver will be picked up and installed.
You can check if a driver has been installed by looking at the top of the Main Menu in the ToolKit while in fastboot mode and adb modes. If a serial number is displayed in each mode then it will work fine.
----------------------------------------------------------------------------
Q. Can I back up my apps before unlocking the Bootloader so I don't lose everything?
Performing an APPS BACKUP (option2, 1) will backup all apps that were installed after you first used your device. This will include any associated user data (such as settings or high scores for games) and apps you installed from Google Play Store. Just follow the recommended options and remember to turn your phones screen on before starting it as you need to confirm on your screen.
This option will NOT require your bootloader to be unlocked first.
You can also backup your Internal Storage without unlocking using option 2, 3 from the main menu. This will backup anything you store on your Internal Storage such as game data, music, videos. This is just pulled from your /data/media folder so you can view or edit the files on your pc after they have been pulled.
You can then unlock the bootloader (wiping your device) and retore the apps (option 2, 10) and Internal Storage data (option 2, 11) after doing whatever you want to with your device.
The only thing you cannot do with the ToolKit is to save the system settings but some of those are backed up by google if you chose that option when turning your device on the first time.
----------------------------------------------------------------------------
Q. I have Windows 8 and cannot install the drivers
How to Disable Driver Signature Enforcement in Windows 8:
From the Metro Start Screen, open Settings (move your mouse to the bottom-right-corner of the screen and wait for the pop-out bar to appear, then click the Gear icon).
Click ‘More PC Settings’.
Click ‘General’.
Scroll down, and click ‘Restart now’ under ‘Advanced startup’.
Wait a bit.
Click ‘Troubleshoot’.
Click ‘Advanced Options’
Click ‘Windows Startup Settings’
Click Restart.
When your computer restarts, select ‘Disable driver signature enforcement‘ from the list. You can now load your modified driver. Reboot again once the driver is installed and all will be well.
----------------------------------------------------------------------------
Q. I cannot find Developer options to Enable USB Debugging
With Android 4.2 google have thought it would be funny to hide the Developer options screen in the Settings. This means you cannot enable usb debugging to communicate with your device. To show the Developers options screen do the following:
Goto Settings, About tablet and tap your finger on the the 'Build number' text at the bottom 7 times (not too fast).
When you have tapped 3 times you will be given a countdown of taps until you become a 'developer'.
Once you are told you are now a developer you can go back to the Settings screen and can see Developer options.
You can now go into Developer options and enable usb debugging.
----------------------------------------------------------------------------
Q. I tried to enter the code for the professional version but the Toolkit says the code is incorrect
Make sure the code entered is for the correct Toolkit being used.
You need to make sure you start the Toolkit with the toolkit.exe file when activating and not the tkmain.exe file so the settings can be initialised or the code will not be accepted.
Also make sure you enter the code correctly as the characters are case sensitive.
I think koush tweeted that the recoveries are available about 10 mins ago
Sent from my Galaxy Nexus using Tapatalk 2
Count me in for testing
I can test
Sent from my Nexus 4 using xda app-developers app
Will we get Auto Update access if we participate as testers? =)
Popopinsel said:
Will we get Auto Update access if we participate as testers? =)
Click to expand...
Click to collapse
Yes I am giving activation codes to all testers for helping.
Mark.
[vertigo] said:
Count me in for testing
Click to expand...
Click to collapse
buddahlou said:
I can test
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
pm's sent
Mark.
Dorilife said:
I think koush tweeted that the recoveries are available about 10 mins ago
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
http://www.clockworkmod.com/rommanager
not listed yet anyway
Dorilife said:
I think koush tweeted that the recoveries are available about 10 mins ago
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
He messaged earlier saying that the Nexus 4 and 10 would get CWM Recovery soon but they aren't in http://www.clockworkmod.com/rommanager yet.
Mark.
mskip said:
Yes I am giving activation codes to all testers for helping.
Mark.
Click to expand...
Click to collapse
That's nice!
Any drawbacks in testing? Is it safe or will I brick my precious?
I can do some testing too.
Is it only available for Windows users (I don't have any Windows to test) ?
Popopinsel said:
That's nice!
Any drawbacks in testing? Is it safe or will I brick my precious?
Click to expand...
Click to collapse
No possibility of bricks as images are booted and not flashed so nothing is written permanently.
Mark.
gromez said:
I can do some testing too.
Is it only available for Windows users (I don't have any Windows to test) ?
Click to expand...
Click to collapse
Yes im afraid its only for Windows but if you have already setup adb/fastboot from a previous phone you may be able to run it under an emulator such as WineHQ.
Mark.
I have used your toolkit with my galaxy nexus, but, sadly, I have not the nexus 4 yet. If I get it soon you will know, but maybe you will have enough testers
mskip said:
No possibility of bricks as images are booted and not flashed so nothing is written permanently.
Mark.
Click to expand...
Click to collapse
Ok then, I am at your command for testing!
I will test for you.
Thanks
C
I can test it
My Nexus 4 was delivered a few minutes ago, i can Test it
just PM me
Thanks for the work
Hey guys.
I have Samsung galaxy ace 5839i (stock for 5830i) and I am using it for a few years, but this problem came for the first time.
Always, when I try to connect my mobile to pc using cable, it just won't connect, it won't even show me the notification of connecting.
Before this problem, I connected it to fedora linux and it was succesful, but now? It won't show me that USB sign even in windows.
Any help?
Thanks in advance
@LiQuDiAk, basically s5839i and s5830 i are identical in many areas ,, few questions though,, did you root your device or you are on android 2.3.6 stock version / kernel 2.6.35.7 ?
when you are in your windows device manager ( while you are connected , do you see any exclamation / question marks in front of the corresponding driver), you can always uninstall your old driver, reboot , then try compiled driver in attachment , and reboot to take proper effect in your registry (tested on win xp/7 -32bit) . Also check your device settings>Application>Development > USB Debugging and make sure the option is checked. now lets check your debugging mode through ADB command and see if your device is being recognized. download platform zip attachment, unzip it and put the folder someplace like your desktop. Now open your command prompt (cmd) through whatever means you are comfortable and change directory (cd) to the unzip folder or simply open your folder and drag/drop adb.exe into your CMD to be in the right place very fast. Then type "adb devices" without quotation marks and report for more troubleshooting .Assuming your Samsung cable is not faulty of course.
@ehsanotaku Yes i did root my phone on pheonix fire rom. No i do not see any. And debugging is checked, that was my first guess why it was causing this. I was checking, whether my device is recognized in linux (only available OS in present) and it was NOT, but the cable is not faulty, because it was charging my phone... but i will do recognize process on windows, hope it will get better. But thanks so far!
so, the driver didnt help, but the adb devices got me something long which i do not completely understand (i am a girl and not IT) so...
LiQuDiAk said:
so, the driver didnt help, but the adb devices got me something long which i do not completely understand (i am a girl and not IT) so...
Click to expand...
Click to collapse
off topic though, gender discrimination is prejudice,, sorry if you are offended . Learning from each other despite your gender,does not undermine your knowledge EVER mate You might find it hard to believe, but I am quite novice in android stuff myself ( learning a great deal from some female members though ).
Back to topic at hand now,,,So let Perfectly Clear take away the time-consuming tasks and fix some stuff ..1. so you can not access your sdcard's content from either systems,, even if you try some live bootable Ubuntu disk/flash into your system and boot it up,, you can't access the mount drive content , right?
2. screenshot of your device manger while you are connected always help mate
3. those long streams of numbers and words is supposed to be your device name , it means your device is communicating with your pc ( /sdcard/ should not be corrupted). You can push (copy ) some vital files to your device with following command :
again same path >> put some file into your desktop (drag/drop to cmd)
i.e: "adb push C:\Users\ehsanotaku\Desktop\test.txt /sdcard/"
back to your device and check root of your files with whatever file explorer you got to approve the theory
4. forgot to ask , just to be on the safe side your device is not in boot loop process, stuck on samsung splash screen or something like that, right?
okay, thanks!
1. I cannot access it trough USB to mobile way, but from SD card adapter, yeah I can (it is just the weird feeling, when you always have to put out your sd and do it that way, i would like to sort this out)
2. http://s1.postimg.org/nkta50u3x/Untitleddas.png I suppose the unknown device is my phone.
3. Just a question, my phone is not connected, i cannot access it and this doesn't help
4. Nope, it is working, i can access everything, just this connecting problem i have. anything else is running smoothly.
Let's say any of this will work, do you think flashing a stock rom will help? I am not sure, if this is problem of rom or not, so...
And maybe i wasn't clear (my bad if not) but when i plug the cable in my device and pc, pc will make this sound of new device found, but it wont show me anything, so my phone. It will charge, but it wont connect, it is behaving like it is on a charger and not connected to the phone.
@LiQuDiAk, Hasty actions are done in a hurry, sometimes without the necessary care or thought. Now let's not leap to any conclusion about your Android custom Rom and flashing back to stock. lets focus on your first most obvious problems,which is driver related.
You didn't declare your flavor of windows: i.e: Windows x86 based-PC;professional 7
Not so sure of your OS Name/Version and System Type, search "system information" in your search box.
Your task manger depicted ACPI x64 ( 64-bit system, no wonder previous 32-bit compatible didn't work out for you ).
Symptoms observed so far:
1. USB cable only charges ( remember your USB cable data line might be the culprit. Just in case of only charging,checking with another set recommended. Your USB port might be problem, some dirt or faulty data line, checking with another USP port doesn't heart though.
2. Windows recognizes something more (like in your case, struggling to find proper corresponding driver), but cannot see it as a Samsung android device (cannot allocate the installed USB drivers to the device).
-If you got Kies (Samsung proprietary software) installed on your PC, delete it with a descent uninstaller program such as CCleaner free version .Kies might cause driver conflict , use it as only last resort , if all drivers failed to communicate with s5830i device.
-Also Uninstall your previous given driver same way, now restart , back to system and grab set of universal Samsung Drivers from attachment .
3.Can't see your "USB connected" in Android notification bar, so you cant click on it and mount your storage data part while you are connected to your PC.
-Normally, when you plug in your Android device, Windows will recognize it as an MTP (Media Transfer Protocol) device and quietly mount it.
However, if you’ve ever attempted to unlock your device such as to install a new ROM or root it, then such miss behaviors might be expected occasionally .
Before i go for more troubleshooting , please provide a full screenshot from your "About Phone" page in your settings . I am quite curious about this phoenix Rom you have mentioned though . I am quite familiar with at least dozen of discontinued/ported projects, but never heard of such ported Rom from other models into s5830i .
Couple of solutions :
Navigate to your settings,Storage and touch the upper-right corner for the “USB computer connection” options, if you have this part available.
make sure “Media device (MTP)” is selected. ( if you have USB Utilities section or whatever added section in your custom settings go there . Selecting that will do the trick. If it does not, then you likely have a driver problem.
Open your device manager, Right click on your unrecognized device in question,choose update driver software, choose Browse my computer,find it through given x64 drivers in your package ,Restart. ( After a successful installation, restart your PC, you must have something like the picture in attachment ) .
Problem was not resolved, Uncheck your debugging option,power off your phone. Now hold Volume(+) + Home + Power for a couple of seconds simultaneously to get to your Samsung Recovery or your Clockwork Recovery, choose Reboot( might be some process/service in your background, which interfere with your Auto USB connected feature of your device. See if the problem is being resolved .
Problems have been persisting, we might need to format your SD card, but before that, insert it into your card reader, in your file explorer window choose Tools>Folder options>select view tab> tick your select hidden file.folders. Now copy all of your SD card's contents into some folder, safe inside your PC.
We can format your card through your clockwork mod recovery console, or some partition tools such as free mini partition wizard,,
problem still persist? let me know
Hey
After some rest with this, my mobile got it solved (dunno why, just once tried to do it and it works.)
So, thank you very much with your answers!!!!
And about that screenshots, I will PM you
But, really, thanks a lot, mate!!!!
Symptoms
The classic symptoms of the issue are at some point the Nvidia Dreamtab will stop booting and hang at the Dreamworks characters screen and never boot any further. The frequency ranges from once a month to a year. You are able to factory reset and the issue goes away for some periodicity and then returns.
NOTE: If you recently bought a new Nvidia Dreamtab and you have this character freeze right after doing the OTA then this probably isn't the issue, I am working on a different fix for that problem in this thread. If however this solution does fix your issue I'd like to hear about it.
Background
The tablet uses the linux ext4 filesystem. The Dreamtab kernel requests a filesystem check every 20 partition mounts(typically during reboots) or when the files system is marked dirty(the tablet is hard powered off, or some other glitch). The tablet is missing the fsck binary which is the filesystem checker similar to what you might have seen in windows with chkdsk. Without this file the tablet can not check filesystem and the kernel waits indefinitely for that to happen and your tablet sits and the Dreamworks characters.
Solution
Temporarily boot to a program(TWRP) that can install the filesystem file on the tablet. To temporarily boot to TWRP the bootloader must be unlocked. The unlock procedure requires erasing all information on the tablet which isn't an issue if you are currently experiencing the problem as a factory reset was the only way to recover anyway. If you have a working tablet and want to apply this fix you should find a way to backup your files prior to attempting this. To better understand how the low level Nabi functions this should be required reading and will help better understand what you are doing. http://forum.xda-developers.com/nabi-2/general/nabi-information-t3229119
Procedure
Only for Nvidia Dreamtab NV08B. Use this at your own risk, your warranty is void. You will lose all personal data on the device
Link to video Youtube video installation
1) Down load the drivers.
-- There are 3 popular options included in the link from above in the driver section of the Nabi General Information thread. Have them handy for the next step.
2) Download TWRP recovery.
-- The file is attached at bottom of post. DTTWRPinstaller300.zip
-- Note: You can automate some of the bootloader unlock and installing TWRP steps below with the install.bat file if you have a working Nabi.
3) Download the fsck patch.
-- The file is attached at bottom of post. NV08B_FSCK_PATCH.zip
4) Reboot to fastboot protocol
-- With Nabi powered off press and hold the power button and the vol + button until a small menu(bootloader menu) appears. Quickly release both buttons or the tablet will start booting normally. Using the vol- button to highlight the fastboot protocol(2nd option from top) and then press the vol+ button to select it. Note: Depending on if the drivers are installed the screen will change or stay the same.
5) Verify drivers installed or install drivers.
-- Open windows device manager. On Windows 10 type "device manager" in to the Cortana search bar. On other versions open run by pressing the "windows key" in lower left of keyboard while also pressing R key. Then type: devmgmt.msc
-- If you have "Android Device" and it's sub menu says bootloader/fastboot then you are set up. If down by "other devices" you have an unknown device then you will need to install the drivers from the selection and download you made from reading the Nabi General Information thread.
6) Unlock the bootloader
-- This step will ERASE ALL information on the tablet.
-- Unzip the DTTWRPinstaller300.zip to a location of your choosing. If you use Windows built in unzip utility make sure you check the box that says to open when unzipping is complete.
-- Hold the shift key on the keyboard while right clicking on the "files" folder. Then select "open command window here"
-- At the prompt type:
Code:
fastboot oem unlock
Note: You need to move quickly to the tablet and do the next step as there is a timeout
-- On the tablet it will ask if you want to unlock. Using the vol- key select "yes" with vol+ or pwr. If you do this properly in the command window on your computer it will tell you it is erasing the device.
7) Temporary boot TWRP
-- I can't remember if after the bootloader unlock if tablet is at fastboot, or if you have to power off the tablet and do step 4 again. I think you can just proceed.
-- At the prompt type
Code:
fastboot boot recovery.img
8) Get the patch file on the tablet
-- Option A: There are a couple options for this. Check the file explorer on your computer. If you see t8400n as a device you can just copy and paste the NV08B_FSCK_PATCH.zip to the internal storage by copy and pasting in windows. Go to step 9.
-- Option B: Insert a microSD card in your computer and copy the NV08B_FSCK_PATCH.zip to your microsd card and insert the sdcard in the tablet.
-- Option C: If the t8400n does not show up on your computer then you will need to transfer via ADB. This will require you to setup the ADB driver like you did for fastboot in step 5. Now in sub Android Device in Device Manager you should see ADB, if you don't install driver.
--Copy the NV08B_FSCK_PATCH.zip to the "files" folder where you extracted DTTWRPinstaller300.zip. It should be in a folder with adb, fastboot, AdbWinAPi, etc
-- At the command prompt type:
Code:
adb push NV08B_FSCK_PATCH.zip /sdcard
9) Install patch
-- In TWRP on tablet click the install tab. Generally you will now see the NV08B_FSCK_PATCH.zip if you picked option A or C. If not navigate to the sdcard folder. If you picked option B navigate up a folder and find external_sdcard folder and look in there.
Note: For external_sdcard it may be necessary to exit to TWRP main menu and select mount tab and make sure Micro SDcard is checked.
-- Once you have found the NV08B_FSCK_PATCH.zip from inside the install tab you can select it and then swipe to install. You should get verification it completed normally.
I know this is rather old, but I have a couple of these tablets I'm trying to get working again to give to a friend's kids, but this doesn't seem to work. Did you have to have USB debugging checked before the tablets stopped booting in order for this to work properly?
Basically I can do all the fastboot stuff without any errors, but when I try to boot to TWRP all the tablets do is pretty much rotate the screen 180° so the bootloader screen is in the opposite corner and the volume buttons no longer work until I hold power for ten seconds to power it off... Any help is greatly appreciated!
Background:
I have a rooted SM-G900V (Verizon Galaxy S5) running Lollipop with a broken screen. I have Titanium Backup installed and it was supposed to be running weekly but wasn't. I have recovered my photos, contacts, etc. by connecting to my PC and copying the internal storage and from my gmail restore to a new GS5. I want to recover app data from a couple apps. The phone has USB debug turned on and I can connect with ADB.
I thought I could just run an ADB backup, but apparently in order for the backup to initiate I have to press a button on the lower right of the screen...which is broken. I suppose if I could connect via WiFi and then use a MHL cable I could use a keyboard/mouse to click the button on the phone but I don't have a MHL cable right now and I don't know if that would work anyway (WiFi ADB hasn't worked for me to this point).
THE QUESTION:
I've done a lot of reading and found a number of ADB options that sounded viable, but have not been successful. I have TitaniumBackup installed and thought that I could launch the "backup all" batch process but don't see how to make that happen. I have a new GS5 that is identical setup so I could record some actions on that one and play them on the broken one potentially.
I'm open to any suggestions.
bkenobi69 said:
......... THE QUESTION: I've done a lot of reading and found a number of ADB options that sounded viable, but have not been successful..........
Click to expand...
Click to collapse
The only thing I can think of is to guide you to the following thread that should, hopefully, be what you need.
https://forum.xda-developers.com/showthread.php?t=2786395
Good Luck!
~~~~~~~~~~~~~~~
UNLESS asked to do so, PLEASE don't PM me regarding support. Sent using The ClaRetoX Forum App on my Enigma Machine {aenigma = Latin for "Riddle"}.
I really appreciate the suggestion. FWIW, I sort of came up with a similar approach myself that I almost have working. I turned on ADB WiFi on the device and then plugged in my wireless USB mouse/keyboard. I set up a script that performs a screen capture every 2 seconds and downloads it locally. With Windows7 image viewer, it automatically updates when the image changes so I get a slide show of what's happening on screen. The only issue I have is that the SD card isn't set up for TitaniumBackup apparently since I get an error when I select the backup action. If I can get TitaniumBackup set up correctly, I should be golden!
Thanks for posting that link. Ironically, the solution I developed was very similar in concept. I will give a short description for others who may need to recover data from a phone with a broken screen.
Prerequisites:
* TitaniumBackup - This can be installed from the Play store even if the phone is not functioning
* USB debug mode enabled - Without this, you are stuck. The only issue here is newer phones don't always enable MTP on connection. My old on did but the new one does not. If it doesn't connect via MTP, you will need to install MTPEnabler or similar.
* USB keyboard/mouse combination
* USB cable
* Charged fully functional phone sans screen
* ADB software - You must have the same version on the phone and PC. If not, it won't work reliably/at all. I went with fastboot_adb(1.0.32)_071114_r21 since I have 1.0.32 on my SM-G900V.
Basic steps:
1) Unpack the ADB software on your PC in a convenient location (C:\ADB)
2) Connect phone to PC via USB
3) Send command to enable WiFi ADB connection
4) Disconnect phone from USB
5) Connect ADB via WiFi
6) Run following batch script:
:loop
adb shell screencap /sdcard/screen.png
del screen.png
adb pull /sdcard/screen.png
echo captured
timeout /t 2
goto loop
Click to expand...
Click to collapse
This will dump a screen shot every 2 seconds
7) Open screen.png in Windows image viewer. It should automatically update when the image is refreshed.
8) Type "launch titaniumbackup" and press enter on wireless keyboard.
9) Using either tab or mouse, select the check box to launch TB.
10) Using either tab or mouse, select "menu" from upper right.
11) Using mouse, select "batch actions" from the list.
12) Using mouse, select "RUN" next to "Backup all user apps" from the list.
If all went well, you now have your phone backup up all application data to your SD card which can be easily used on a new phone to restore data.
NOTE:
It may be possible to also use the built-in ADB backup function. I attempted this at one point, but it requires selecting a button in the lower right on the phone. Since I was using ADB over USB at the time, I could not click the button on the phone since I only had one device connected (no hub). If you have a hub it may be possible to use that approach. Alternately, if you use ADB over WiFi, it should also work. However, be aware that there is no way to see where you are clicking or confirm that it worked other than looking at the files on the SD card as ADB backup doesn't appear to give any feedback. Also, this isn't as easy as TB when it comes to restoring as you either have to backup every app one at a time or all together. When restoring, it's also a one shot deal so you can't select specific apps to restore from a larger set.