Hello friends,
I have a problem with connection, yesterday, i rooted my phone bcs i wanted to do something.
But, i bricked him with wrong SuperSU, get bootloop, did so much work on it, now, i have some custom EMUI rom, but, i cant connect to PC thru HiSuite for backups of contants, sms etc.
So, i know i can extract some IMG files from update.app to flash it into phone, but i have no idea about file who doing that hisuite in phone.
Normally, when phone connect to PC, there is 2 new disk, like PLK_L01 and HiSuite, but now, its only PLK_L01 but no hisuite.
So, anyone know how to get it back?
Or if i can do it manually, tell me how, in system, there is Huawei Backup app, but it not work.
So, can u help me please?
Thanks.
try unroot, flash magisk on stock boot.img and revert to stock recovery. TWRP flash as a erecovery (recovery2).
Finally, i dont want to unroot it. I just need, what the file from UPDATE.APP will install thru fastboot hisuite if it possible?
Related
Trying to update my device (GR5 KII L33) I downloaded an update.zip file, and added it to the dload folder, but this file did not correspond to my phone, so now it does not turn on and only directs me to the TWRP. I have not found the original software KII L33 and I can not get my phone to turn on, although I have repeatedly installed my backup the phone just go to the TWRP
Please, I would be very grateful if you could help me restore my phone, or share the original file so I can install it, since so far I have not found a solution
If you're wanting to flash stock then there's a guide here.
If you're wanting a custom rom then in TWRP just do a full wipe (factory reset + system) and flash the ROM zip file just like normal.
Don't flash official ROM update zips in TWRP.
Donot flash official emui updates from twrp, as it contains update.app files
Hi, I am using P600 (note 10.1 2014 Wifi) XAR one
Yesterday I was trying to install magisk all day, but failed all
When I rooted device and instaled TWRP, in TWRP it made error number 1 and it says something like turn to stock boot, so I tried to reinstall stock firmware via Odin, but it didn’t change anything.
I guess it’s a problem with boot.img or the autoroot method I used.
So I tried to use fastboot to install TWRP without rooting, but this time it didn’t boot into bootloader from fastboot, it just restarted the tablet all the time.
So I tried to manually reboot into the download mode, but fastboot didn’t recognize the device then.
When I did it, I turnned on the USB debugging with no mistake since it’s just samsung.
So I booted into recovery mode(It can go into recovery mode without problem)
Then tried option “reboot to boorloader” and it just restarts the tablet again.
I guess something corrupted boot.img or bootloader somehow, while I was rooting or something.
Can I get factory boot.img and solve it? Or when I install stock firmware via Odin does it also fix boot.img and boot loader?
I tried to install stock firmwares and factory reset several times. It didn’t help anything. It did unroot or turn the recovery to stock recovery, but couldn’t get into bootloader.
Can anyone please help me or give me advice to solve this problem?
Bump
So, I kind of rooted my device using Kingo Root and it wasn't successful (I guess). So, in fastboot mode, I tried OEM unlock and it didn't work too; but anyway, I flashed TWRP recovery into my phone and through that I tried to install CM 13,14 custom ROMs which was completely unsuccessful. It doesn't allow me to install any ROM. And says that root privilege is lost. And now, all that I have access to is a phone stuck in bootloop and TWRP which doesn't allow me anything to do because apparently root access is lost. :crying:
I tried every method of flashing via YGDP tool and it is stuck at 'entering download mode'. I have installed different drivers over and again to fix as suggested by different threads but still, it's the same. [Windows 8.1] . And is there any other tool to flash this same stock ROM or better, can I get root access again in a bricked device and install a custom ROM any way?:fingers-crossed:
I also have access to ADB sideload via TWRP, so can I get stock ROM in .zip format. So far, I can only find it in .CPB format; maybe I can use .zip stock ROM via ADB sideload to flash it. Please help if any of this is possible.
*Apology for such a long question but I think you guys must know everything in order to provide me with a fix*
It's fixed.
dhananjaydhiman said:
So, I kind of rooted my device using Kingo Root and it wasn't successful (I guess). So, in fastboot mode, I tried OEM unlock and it didn't work too; but anyway, I flashed TWRP recovery into my phone and through that I tried to install CM 13,14 custom ROMs which was completely unsuccessful. It doesn't allow me to install any ROM. And says that root privilege is lost. And now, all that I have access to is a phone stuck in bootloop and TWRP which doesn't allow me anything to do because apparently root access is lost. :crying:
I tried every method of flashing via YGDP tool and it is stuck at 'entering download mode'. I have installed different drivers over and again to fix as suggested by different threads but still, it's the same. [Windows 8.1] . And is there any other tool to flash this same stock ROM or better, can I get root access again in a bricked device and install a custom ROM any way?:fingers-crossed:
I also have access to ADB sideload via TWRP, so can I get stock ROM in .zip format. So far, I can only find it in .CPB format; maybe I can use .zip stock ROM via ADB sideload to flash it. Please help if any of this is possible.
*Apology for such a long question but I think you guys must know everything in order to provide me with a fix*
Click to expand...
Click to collapse
Its fixed now, I assume it was because of the ROM file being downloaded through chrome in phone, I downloaded ROM and GApps in PC and flashed through TWRP and bam! Its back on:laugh:
TWRP - 2.4.4
ROM - Resurrection Remix 5.7.2
Thanks anyways!
Hi guys,
yesterday I succesfully unlocked bootloader on my Mate 10 PRO (Bla-L09) and installed LineageOS 15.1 with success.
The problem is that now I just want to recover my stock firmware on it.
I downloaded the update.zip from the site (for my branded phone) and it was C55 version but I don't know how to repair it. Just tried to reflash stock recovery and start recovery mode but with no success. Installation hang on 5% and then phone reboots automatically.
Already tried to flash SYSTEM.img (from Huawei Update Extractor) with fastboot: it flashes correctly but im impossible to boot the devices.
I am sure that I do something wrong. Can you help me please?
Hi,
Where have you found original stock rom. It is my impression that it is not available. Could you please provide a link?
Thanks
outlier91 said:
Hi guys,
yesterday I succesfully unlocked bootloader on my Mate 10 PRO (Bla-L09) and installed LineageOS 15.1 with success.
The problem is that now I just want to recover my stock firmware on it.
I downloaded the update.zip from the site (for my branded phone) and it was C55 version but I don't know how to repair it. Just tried to reflash stock recovery and start recovery mode but with no success. Installation hang on 5% and then phone reboots automatically.
Already tried to flash SYSTEM.img (from Huawei Update Extractor) with fastboot: it flashes correctly but im impossible to boot the devices.
I am sure that I do something wrong. Can you help me please?
Click to expand...
Click to collapse
After flashing back stock system.img you need to Factory Reset in stock recovery. Alternatively use HWOTA: https://forum.xda-developers.com/mate-10/how-to/guide-mate-10-flash-oreo-update-package-t3716814
Always make a Twrp backup of your rom so you don't have to worry about flashing back like this.Thats what I do and I have never had a issue.
Hi team. Forgivevme if this has been posted in the wrong place
Need assistance. Have a Huawei p8 lite 2017. rooted it 8 months ago, with custom recovery.
Recently installed apps2d and may i stuffed some link/mount. Since then, camera wont run, gallery wont open, google apps freeze. Tried factory reset and flashing stock but get this error. Error installing zip package. Also md5 not found.
Firmware is PRA-LX2C185B160. Should i unroot and flash with stock recovery or could somebody provide me with working firmware if this is the problem
Update: tried to reflash stock boot img to do update.app. phone know gets stuck in Emui erecovery.
Fastboot acknowledges device but commands fail. Download mode shows Bootloader unlocked, Frp locked.
Any advise on how to unbrick. I have tried the force flash update.app via micro sd, no luck. Tried using huawei extractor to extract update.app. and flash fastboot boot, recovery img etc. No luck.
Please assist.
Hi . I really need assistance. The update.app doesnt have cust.img file. I think this is where the problem lies. I have downloaded 10 times. Still no cust.img
Mods. Please delete or close.